OMAP3: Pandora: Update pin mux

Clock pin must have input enabled for MMC3 to work.
Also enable pull-ups for cmd/data lines to be consistent
with remaining MMC host pin setup.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index f845504..dd09f12 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -199,12 +199,12 @@
  MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
  MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTD | DIS | M4)) /*GPIO_127 - MMC2_WP*/\
  /*SDIO Interface to WIFI Module*/\
- MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
- MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTD | DIS | M2)) /*MMC3_CMD*/\
- MUX_VAL(CP(ETK_D4_ES2),	(IEN  | PTD | DIS | M2)) /*MMC3_DAT0*/\
- MUX_VAL(CP(ETK_D5_ES2),	(IEN  | PTD | DIS | M2)) /*MMC3_DAT1*/\
- MUX_VAL(CP(ETK_D6_ES2),	(IEN  | PTD | DIS | M2)) /*MMC3_DAT2*/\
- MUX_VAL(CP(ETK_D3_ES2),	(IEN  | PTD | DIS | M2)) /*MMC3_DAT3*/\
+ MUX_VAL(CP(ETK_CLK_ES2),	(IEN  | PTD | DIS | M2)) /*MMC3_CLK*/\
+ MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
+ MUX_VAL(CP(ETK_D4_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT0*/\
+ MUX_VAL(CP(ETK_D5_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT1*/\
+ MUX_VAL(CP(ETK_D6_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT2*/\
+ MUX_VAL(CP(ETK_D3_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT3*/\
  /*Audio Interface To Bluetooth chip*/\
  MUX_VAL(CP(MCBSP3_DX),		(IDIS | PTD | DIS | M0)) /*McBSP3_DX*/\
  MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M0)) /*McBSP3_DR*/\