diff --git a/arch/powerpc/cpu/mpc83xx/qe_io.c b/arch/powerpc/cpu/mpc83xx/qe_io.c
index 88aa689..1079ae1 100644
--- a/arch/powerpc/cpu/mpc83xx/qe_io.c
+++ b/arch/powerpc/cpu/mpc83xx/qe_io.c
@@ -14,55 +14,58 @@
 #define	NUM_OF_PINS	32
 void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 {
-	u32			pin_2bit_mask;
-	u32			pin_2bit_dir;
-	u32			pin_2bit_assign;
-	u32			pin_1bit_mask;
-	u32			tmp_val;
-	volatile immap_t	*im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile qepio83xx_t	*par_io = (volatile qepio83xx_t *)&im->qepio;
+	u32		2bit_mask;
+	u32		2bit_dir;
+	u32		2bit_assign;
+	u32		1bit_mask;
+	u32		tmp_val;
+	immap_t		*im;
+	qepio83xx_t	*par_io;
+	int		offset;
+
+	im = (immap_t *)CONFIG_SYS_IMMR;
+	par_io = (qepio83xx_t *)&im->qepio;
+	offset = (NUM_OF_PINS - (pin % (NUM_OF_PINS / 2) + 1) * 2);
 
 	/* Calculate pin location and 2bit mask and dir */
-	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
-	pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+	2bit_mask = (u32)(0x3 << offset);
+	2bit_dir = (u32)(dir << offset);
 
 	/* Setup the direction */
-	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
+	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
 		in_be32(&par_io->ioport[port].dir2) :
 		in_be32(&par_io->ioport[port].dir1);
 
-	if (pin > (NUM_OF_PINS/2) -1) {
-		out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
+	if (pin > (NUM_OF_PINS / 2) - 1) {
+		out_be32(&par_io->ioport[port].dir2, ~2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].dir2, 2bit_dir | tmp_val);
 	} else {
-		out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
+		out_be32(&par_io->ioport[port].dir1, ~2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].dir1, 2bit_dir | tmp_val);
 	}
 
 	/* Calculate pin location for 1bit mask */
-	pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
+	1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin + 1)));
 
 	/* Setup the open drain */
 	tmp_val = in_be32(&par_io->ioport[port].podr);
-	if (open_drain) {
-		out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
-	} else {
-		out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
-	}
+	if (open_drain)
+		out_be32(&par_io->ioport[port].podr, 1bit_mask | tmp_val);
+	else
+		out_be32(&par_io->ioport[port].podr, ~1bit_mask & tmp_val);
 
 	/* Setup the assignment */
-	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
-		in_be32(&par_io->ioport[port].ppar2):
+	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+		in_be32(&par_io->ioport[port].ppar2) :
 		in_be32(&par_io->ioport[port].ppar1);
-	pin_2bit_assign = (u32)(assign
-				<< (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
+	2bit_assign = (u32)(assign << offset);
 
 	/* Clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS/2) - 1) {
-		out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
+	if (pin > (NUM_OF_PINS / 2) - 1) {
+		out_be32(&par_io->ioport[port].ppar2, ~2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].ppar2, 2bit_assign | tmp_val);
 	} else {
-		out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
-		out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
+		out_be32(&par_io->ioport[port].ppar1, ~2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].ppar1, 2bit_assign | tmp_val);
 	}
 }
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 61ca476..1a829b5 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -26,7 +26,7 @@
 
 #define MPC85xx_DEVDISR_QE_DISABLE	0x1
 
-qe_map_t		*qe_immr = NULL;
+qe_map_t		*qe_immr;
 #ifdef CONFIG_QE
 static qe_snum_t	snums[QE_NUM_OF_SNUM];
 #endif
@@ -38,18 +38,16 @@
 	u32 cecr;
 
 	if (cmd == QE_RESET) {
-		out_be32(&qe_immr->cp.cecr,(u32) (cmd | QE_CR_FLG));
+		out_be32(&qe_immr->cp.cecr, (u32)(cmd | QE_CR_FLG));
 	} else {
 		out_be32(&qe_immr->cp.cecdr, cmd_data);
 		out_be32(&qe_immr->cp.cecr, (sbc | QE_CR_FLG |
-			 ((u32) mcn<<QE_CR_PROTOCOL_SHIFT) | cmd));
+			 ((u32)mcn << QE_CR_PROTOCOL_SHIFT) | cmd));
 	}
 	/* Wait for the QE_CR_FLG to clear */
 	do {
 		cecr = in_be32(&qe_immr->cp.cecr);
 	} while (cecr & QE_CR_FLG);
-
-	return;
 }
 
 #ifdef CONFIG_QE
@@ -66,12 +64,13 @@
 	if (off != 0)
 		gd->arch.mp_alloc_base += (align - off);
 
-	if ((off = size & align_mask) != 0)
+	off = size & align_mask;
+	if (off != 0)
 		size += (align - off);
 
 	if ((gd->arch.mp_alloc_base + size) >= gd->arch.mp_alloc_top) {
 		gd->arch.mp_alloc_base = savebase;
-		printf("%s: ran out of ram.\n",  __FUNCTION__);
+		printf("%s: ran out of ram.\n",  __func__);
 	}
 
 	retloc = gd->arch.mp_alloc_base;
@@ -93,10 +92,10 @@
 #ifdef CONFIG_QE
 static void qe_sdma_init(void)
 {
-	volatile sdma_t	*p;
-	uint		sdma_buffer_base;
+	sdma_t	*p;
+	uint	sdma_buffer_base;
 
-	p = (volatile sdma_t *)&qe_immr->sdma;
+	p = (sdma_t *)&qe_immr->sdma;
 
 	/* All of DMA transaction in bus 1 */
 	out_be32(&p->sdaqr, 0);
@@ -212,7 +211,7 @@
 	qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
 
 	/* enable the microcode in IRAM */
-	out_be32(&qe_immr->iram.iready,QE_IRAM_READY);
+	out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
 #endif
 
 	gd->arch.mp_alloc_base = QE_DATAONLY_BASE;
@@ -235,10 +234,12 @@
 	void *addr = (void *)CONFIG_SYS_QE_FW_ADDR;
 
 	if (src == BOOT_SOURCE_IFC_NOR)
-		addr = (void *)(CONFIG_SYS_QE_FW_ADDR + CONFIG_SYS_FSL_IFC_BASE);
+		addr = (void *)(CONFIG_SYS_QE_FW_ADDR +
+				CONFIG_SYS_FSL_IFC_BASE);
 
 	if (src == BOOT_SOURCE_QSPI_NOR)
-		addr = (void *)(CONFIG_SYS_QE_FW_ADDR + CONFIG_SYS_FSL_QSPI_BASE);
+		addr = (void *)(CONFIG_SYS_QE_FW_ADDR +
+				CONFIG_SYS_FSL_QSPI_BASE);
 
 	if (src == BOOT_SOURCE_SD_MMC) {
 		int dev = CONFIG_SYS_MMC_ENV_DEV;
@@ -320,7 +321,7 @@
 void qe_reset(void)
 {
 	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
-			 (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+		     (u8)QE_CR_PROTOCOL_UNSPECIFIED, 0);
 }
 
 #ifdef CONFIG_QE
@@ -329,24 +330,22 @@
 	u32	cecr;
 
 	out_be32(&qe_immr->cp.cecdr, para_ram_base);
-	out_be32(&qe_immr->cp.cecr, ((u32) snum<<QE_CR_ASSIGN_PAGE_SNUM_SHIFT)
+	out_be32(&qe_immr->cp.cecr, ((u32)snum << QE_CR_ASSIGN_PAGE_SNUM_SHIFT)
 					 | QE_CR_FLG | QE_ASSIGN_PAGE);
 
 	/* Wait for the QE_CR_FLG to clear */
 	do {
 		cecr = in_be32(&qe_immr->cp.cecr);
-	} while (cecr & QE_CR_FLG );
-
-	return;
+	} while (cecr & QE_CR_FLG);
 }
 #endif
 
 /*
  * brg: 0~15 as BRG1~BRG16
-   rate: baud rate
+ * rate: baud rate
  * BRG input clock comes from the BRGCLK (internal clock generated from
-   the QE clock, it is one-half of the QE clock), If need the clock source
-   from CLKn pin, we have te change the function.
+ * the QE clock, it is one-half of the QE clock), If need the clock source
+ * from CLKn pin, we have te change the function.
  */
 
 #define BRG_CLK		(gd->arch.brg_clk)
@@ -354,12 +353,14 @@
 #ifdef CONFIG_QE
 int qe_set_brg(uint brg, uint rate)
 {
-	volatile uint	*bp;
-	u32		divisor;
-	int		div16 = 0;
+	uint	*bp;
+	u32	divisor;
+	u32	val;
+	int	div16 = 0;
 
 	if (brg >= QE_NUM_OF_BRGS)
 		return -EINVAL;
+
 	bp = (uint *)&qe_immr->brg.brgc1;
 	bp += brg;
 
@@ -369,33 +370,37 @@
 		divisor /= 16;
 	}
 
-	*bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
-	__asm__ __volatile__("sync");
+	/* CHECK TODO */
+	/*
+	 * was
+	 * *bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+	 * __asm__ __volatile__("sync");
+	 */
 
-	if (div16) {
-		*bp |= QE_BRGC_DIV16;
-		__asm__ __volatile__("sync");
-	}
+	val = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+	if (div16)
+		val |= QE_BRGC_DIV16;
+
+	out_be32(bp, val);
 
 	return 0;
 }
 #endif
 
-/* Set ethernet MII clock master
-*/
+/* Set ethernet MII clock master */
 int qe_set_mii_clk_src(int ucc_num)
 {
 	u32	cmxgcr;
 
 	/* check if the UCC number is in range. */
-	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
-		printf("%s: ucc num not in ranges\n", __FUNCTION__);
+	if ((ucc_num > UCC_MAX_NUM - 1) || ucc_num < 0) {
+		printf("%s: ucc num not in ranges\n", __func__);
 		return -EINVAL;
 	}
 
 	cmxgcr = in_be32(&qe_immr->qmx.cmxgcr);
 	cmxgcr &= ~QE_CMXGCR_MII_ENET_MNG_MASK;
-	cmxgcr |= (ucc_num <<QE_CMXGCR_MII_ENET_MNG_SHIFT);
+	cmxgcr |= (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
 	out_be32(&qe_immr->qmx.cmxgcr, cmxgcr);
 
 	return 0;
@@ -417,7 +422,7 @@
  * the actual uploading of the microcode.
  */
 static void qe_upload_microcode(const void *base,
-	const struct qe_microcode *ucode)
+				const struct qe_microcode *ucode)
 {
 	const u32 *code = base + be32_to_cpu(ucode->code_offset);
 	unsigned int i;
@@ -494,7 +499,7 @@
 	}
 
 	/* Validate some of the fields */
-	if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
+	if (firmware->count < 1 || firmware->count > MAX_QE_RISC) {
 		printf("Invalid data\n");
 		return -EINVAL;
 	}
@@ -522,7 +527,7 @@
 	 * function isn't available unless you turn on JFFS support.
 	 */
 	crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size));
-	if (crc != (crc32(-1, (const void *) firmware, calc_size) ^ -1)) {
+	if (crc != (crc32(-1, (const void *)firmware, calc_size) ^ -1)) {
 		printf("Firmware CRC is invalid\n");
 		return -EIO;
 	}
@@ -532,12 +537,12 @@
 	 */
 	if (!firmware->split) {
 		out_be16(&qe_immr->cp.cercr,
-			in_be16(&qe_immr->cp.cercr) | QE_CP_CERCR_CIR);
+			 in_be16(&qe_immr->cp.cercr) | QE_CP_CERCR_CIR);
 	}
 
 	if (firmware->soc.model)
 		printf("Firmware '%s' for %u V%u.%u\n",
-			firmware->id, be16_to_cpu(firmware->soc.model),
+		       firmware->id, be16_to_cpu(firmware->soc.model),
 			firmware->soc.major, firmware->soc.minor);
 	else
 		printf("Firmware '%s'\n", firmware->id);
@@ -550,7 +555,7 @@
 	strncpy(qe_firmware_info.id, (char *)firmware->id, 62);
 	qe_firmware_info.extended_modes = firmware->extended_modes;
 	memcpy(qe_firmware_info.vtraps, firmware->vtraps,
-		sizeof(firmware->vtraps));
+	       sizeof(firmware->vtraps));
 	qe_firmware_uploaded = 1;
 
 	/* Loop through each microcode. */
@@ -634,7 +639,7 @@
 	}
 
 	/* Validate some of the fields */
-	if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
+	if (firmware->count < 1 || firmware->count > MAX_QE_RISC) {
 		printf("Invalid data\n");
 		return -EINVAL;
 	}
@@ -803,7 +808,7 @@
 
 		if (argc > 3) {
 			ulong length = simple_strtoul(argv[3], NULL, 16);
-			struct qe_firmware *firmware = (void *) addr;
+			struct qe_firmware *firmware = (void *)addr;
 
 			if (length != be32_to_cpu(firmware->header.length)) {
 				printf("Length mismatch\n");
@@ -811,7 +816,7 @@
 			}
 		}
 
-		return qe_upload_firmware((const struct qe_firmware *) addr);
+		return qe_upload_firmware((const struct qe_firmware *)addr);
 	}
 
 	return cmd_usage(cmdtp);
@@ -820,7 +825,6 @@
 U_BOOT_CMD(
 	qe, 4, 0, qe_cmd,
 	"QUICC Engine commands",
-	"fw <addr> [<length>] - Upload firmware binary at address <addr> to "
-		"the QE,\n"
+	"fw <addr> [<length>] - Upload firmware binary at address <addr> to the QE,\n"
 	"\twith optional length <length> verification."
 );
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
index 9beb5d9..306f1ea 100644
--- a/drivers/qe/uccf.c
+++ b/drivers/qe/uccf.c
@@ -14,7 +14,7 @@
 #include "uccf.h"
 #include <fsl_qe.h>
 
-void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
+void ucc_fast_transmit_on_demand(struct ucc_fast_priv *uccf)
 {
 	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
 }
@@ -22,170 +22,271 @@
 u32 ucc_fast_get_qe_cr_subblock(int ucc_num)
 {
 	switch (ucc_num) {
-		case 0:	return QE_CR_SUBBLOCK_UCCFAST1;
-		case 1:	return QE_CR_SUBBLOCK_UCCFAST2;
-		case 2:	return QE_CR_SUBBLOCK_UCCFAST3;
-		case 3:	return QE_CR_SUBBLOCK_UCCFAST4;
-		case 4:	return QE_CR_SUBBLOCK_UCCFAST5;
-		case 5:	return QE_CR_SUBBLOCK_UCCFAST6;
-		case 6:	return QE_CR_SUBBLOCK_UCCFAST7;
-		case 7:	return QE_CR_SUBBLOCK_UCCFAST8;
-		default:	return QE_CR_SUBBLOCK_INVALID;
+	case 0:
+		return QE_CR_SUBBLOCK_UCCFAST1;
+	case 1:
+		return QE_CR_SUBBLOCK_UCCFAST2;
+	case 2:
+		return QE_CR_SUBBLOCK_UCCFAST3;
+	case 3:
+		return QE_CR_SUBBLOCK_UCCFAST4;
+	case 4:
+		return QE_CR_SUBBLOCK_UCCFAST5;
+	case 5:
+		return QE_CR_SUBBLOCK_UCCFAST6;
+	case 6:
+		return QE_CR_SUBBLOCK_UCCFAST7;
+	case 7:
+		return QE_CR_SUBBLOCK_UCCFAST8;
+	default:
+		return QE_CR_SUBBLOCK_INVALID;
 	}
 }
 
-static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr,
-				 u8 *reg_num, u8 *shift)
+static void ucc_get_cmxucr_reg(int ucc_num, u32 **p_cmxucr,
+			       u8 *reg_num, u8 *shift)
 {
 	switch (ucc_num) {
-		case 0:	/* UCC1 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr1);
-			*reg_num = 1;
-			*shift  = 16;
-			break;
-		case 2:	/* UCC3 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr1);
-			*reg_num = 1;
-			*shift  = 0;
-			break;
-		case 4:	/* UCC5 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr2);
-			*reg_num = 2;
-			*shift  = 16;
-			break;
-		case 6:	/* UCC7 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr2);
-			*reg_num = 2;
-			*shift  = 0;
-			break;
-		case 1:	/* UCC2 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr3);
-			*reg_num = 3;
-			*shift  = 16;
-			break;
-		case 3:	/* UCC4 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr3);
-			*reg_num = 3;
-			*shift  = 0;
-			break;
-		case 5:	/* UCC6 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr4);
-			*reg_num = 4;
-			*shift  = 16;
-			break;
-		case 7:	/* UCC8 */
-			*p_cmxucr  = &(qe_immr->qmx.cmxucr4);
-			*reg_num = 4;
-			*shift  = 0;
-			break;
-		default:
-			break;
+	case 0:	/* UCC1 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr1;
+		*reg_num = 1;
+		*shift  = 16;
+		break;
+	case 2:	/* UCC3 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr1;
+		*reg_num = 1;
+		*shift  = 0;
+		break;
+	case 4:	/* UCC5 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr2;
+		*reg_num = 2;
+		*shift  = 16;
+		break;
+	case 6:	/* UCC7 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr2;
+		*reg_num = 2;
+		*shift  = 0;
+		break;
+	case 1:	/* UCC2 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr3;
+		*reg_num = 3;
+		*shift  = 16;
+		break;
+	case 3:	/* UCC4 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr3;
+		*reg_num = 3;
+		*shift  = 0;
+		break;
+	case 5:	/* UCC6 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr4;
+		*reg_num = 4;
+		*shift  = 16;
+		break;
+	case 7:	/* UCC8 */
+		*p_cmxucr  = &qe_immr->qmx.cmxucr4;
+		*reg_num = 4;
+		*shift  = 0;
+		break;
+	default:
+		break;
 	}
 }
 
 static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode)
 {
-	volatile u32	*p_cmxucr = NULL;
-	u8		reg_num = 0;
-	u8		shift = 0;
-	u32		clockBits;
-	u32		clockMask;
-	int		source = -1;
+	u32	*p_cmxucr = NULL;
+	u8	reg_num = 0;
+	u8	shift = 0;
+	u32	clk_bits;
+	u32	clk_mask;
+	int	source = -1;
 
 	/* check if the UCC number is in range. */
-	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+	if ((ucc_num > UCC_MAX_NUM - 1) || ucc_num < 0)
 		return -EINVAL;
 
-	if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
-		printf("%s: bad comm mode type passed\n", __FUNCTION__);
+	if (!(mode == COMM_DIR_RX || mode == COMM_DIR_TX)) {
+		printf("%s: bad comm mode type passed\n", __func__);
 		return -EINVAL;
 	}
 
 	ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
 
 	switch (reg_num) {
-		case 1:
-			switch (clock) {
-				case QE_BRG1:	source = 1; break;
-				case QE_BRG2:	source = 2; break;
-				case QE_BRG7:	source = 3; break;
-				case QE_BRG8:	source = 4; break;
-				case QE_CLK9:	source = 5; break;
-				case QE_CLK10:	source = 6; break;
-				case QE_CLK11:	source = 7; break;
-				case QE_CLK12:	source = 8; break;
-				case QE_CLK15:	source = 9; break;
-				case QE_CLK16:	source = 10; break;
-				default:	source = -1; break;
-			}
+	case 1:
+		switch (clock) {
+		case QE_BRG1:
+			source = 1;
+			break;
+		case QE_BRG2:
+			source = 2;
+			break;
+		case QE_BRG7:
+			source = 3;
+			break;
+		case QE_BRG8:
+			source = 4;
+			break;
+		case QE_CLK9:
+			source = 5;
+			break;
+		case QE_CLK10:
+			source = 6;
+			break;
+		case QE_CLK11:
+			source = 7;
 			break;
-		case 2:
-			switch (clock) {
-				case QE_BRG5:	source = 1; break;
-				case QE_BRG6:	source = 2; break;
-				case QE_BRG7:	source = 3; break;
-				case QE_BRG8:	source = 4; break;
-				case QE_CLK13:	source = 5; break;
-				case QE_CLK14:	source = 6; break;
-				case QE_CLK19:	source = 7; break;
-				case QE_CLK20:	source = 8; break;
-				case QE_CLK15:	source = 9; break;
-				case QE_CLK16:	source = 10; break;
-				default:	source = -1; break;
-			}
+		case QE_CLK12:
+			source = 8;
 			break;
-		case 3:
-			switch (clock) {
-				case QE_BRG9:	source = 1; break;
-				case QE_BRG10:	source = 2; break;
-				case QE_BRG15:	source = 3; break;
-				case QE_BRG16:	source = 4; break;
-				case QE_CLK3:	source = 5; break;
-				case QE_CLK4:	source = 6; break;
-				case QE_CLK17:	source = 7; break;
-				case QE_CLK18:	source = 8; break;
-				case QE_CLK7:	source = 9; break;
-				case QE_CLK8:	source = 10; break;
-				case QE_CLK16:	source = 11; break;
-				default:	source = -1; break;
-			}
+		case QE_CLK15:
+			source = 9;
 			break;
-		case 4:
-			switch (clock) {
-				case QE_BRG13:	source = 1; break;
-				case QE_BRG14:	source = 2; break;
-				case QE_BRG15:	source = 3; break;
-				case QE_BRG16:	source = 4; break;
-				case QE_CLK5:	source = 5; break;
-				case QE_CLK6:	source = 6; break;
-				case QE_CLK21:	source = 7; break;
-				case QE_CLK22:	source = 8; break;
-				case QE_CLK7:	source = 9; break;
-				case QE_CLK8:	source = 10; break;
-				case QE_CLK16:	source = 11; break;
-				default:	source = -1; break;
-			}
+		case QE_CLK16:
+			source = 10;
 			break;
 		default:
 			source = -1;
 			break;
+		}
+		break;
+	case 2:
+		switch (clock) {
+		case QE_BRG5:
+			source = 1;
+			break;
+		case QE_BRG6:
+			source = 2;
+			break;
+		case QE_BRG7:
+			source = 3;
+			break;
+		case QE_BRG8:
+			source = 4;
+			break;
+		case QE_CLK13:
+			source = 5;
+			break;
+		case QE_CLK14:
+			source = 6;
+			break;
+		case QE_CLK19:
+			source = 7;
+			break;
+		case QE_CLK20:
+			source = 8;
+			break;
+		case QE_CLK15:
+			source = 9;
+			break;
+		case QE_CLK16:
+			source = 10;
+			break;
+		default:
+			source = -1;
+			break;
+		}
+		break;
+	case 3:
+		switch (clock) {
+		case QE_BRG9:
+			source = 1;
+			break;
+		case QE_BRG10:
+			source = 2;
+			break;
+		case QE_BRG15:
+			source = 3;
+			break;
+		case QE_BRG16:
+			source = 4;
+			break;
+		case QE_CLK3:
+			source = 5;
+			break;
+		case QE_CLK4:
+			source = 6;
+			break;
+		case QE_CLK17:
+			source = 7;
+			break;
+		case QE_CLK18:
+			source = 8;
+			break;
+		case QE_CLK7:
+			source = 9;
+			break;
+		case QE_CLK8:
+			source = 10;
+			break;
+		case QE_CLK16:
+			source = 11;
+			break;
+		default:
+			source = -1;
+			break;
+		}
+		break;
+	case 4:
+		switch (clock) {
+		case QE_BRG13:
+			source = 1;
+			break;
+		case QE_BRG14:
+			source = 2;
+			break;
+		case QE_BRG15:
+			source = 3;
+			break;
+		case QE_BRG16:
+			source = 4;
+			break;
+		case QE_CLK5:
+			source = 5;
+			break;
+		case QE_CLK6:
+			source = 6;
+			break;
+		case QE_CLK21:
+			source = 7;
+			break;
+		case QE_CLK22:
+			source = 8;
+			break;
+		case QE_CLK7:
+			source = 9;
+			break;
+		case QE_CLK8:
+			source = 10;
+			break;
+		case QE_CLK16:
+			source = 11;
+			break;
+		default:
+			source = -1;
+			break;
+		}
+		break;
+	default:
+		source = -1;
+		break;
 	}
 
 	if (source == -1) {
-		printf("%s: Bad combination of clock and UCC\n", __FUNCTION__);
+		printf("%s: Bad combination of clock and UCC\n", __func__);
 		return -ENOENT;
 	}
 
-	clockBits = (u32) source;
-	clockMask = QE_CMXUCR_TX_CLK_SRC_MASK;
+	clk_bits = (u32)source;
+	clk_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
 	if (mode == COMM_DIR_RX) {
-		clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */
-		clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */
+		clk_bits <<= 4; /* Rx field is 4 bits to left of Tx field */
+		clk_mask <<= 4; /* Rx field is 4 bits to left of Tx field */
 	}
-	clockBits <<= shift;
-	clockMask <<= shift;
+	clk_bits <<= shift;
+	clk_mask <<= shift;
 
-	out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits);
+	out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clk_mask) | clk_bits);
 
 	return 0;
 }
@@ -195,28 +296,45 @@
 	uint base = 0;
 
 	/* check if the UCC number is in range */
-	if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
-		printf("%s: the UCC num not in ranges\n", __FUNCTION__);
+	if ((ucc_num > UCC_MAX_NUM - 1) || ucc_num < 0) {
+		printf("%s: the UCC num not in ranges\n", __func__);
 		return 0;
 	}
 
 	switch (ucc_num) {
-		case 0:	base = 0x00002000; break;
-		case 1:	base = 0x00003000; break;
-		case 2:	base = 0x00002200; break;
-		case 3:	base = 0x00003200; break;
-		case 4:	base = 0x00002400; break;
-		case 5:	base = 0x00003400; break;
-		case 6:	base = 0x00002600; break;
-		case 7:	base = 0x00003600; break;
-		default: break;
+	case 0:
+		base = 0x00002000;
+		break;
+	case 1:
+		base = 0x00003000;
+		break;
+	case 2:
+		base = 0x00002200;
+		break;
+	case 3:
+		base = 0x00003200;
+		break;
+	case 4:
+		base = 0x00002400;
+		break;
+	case 5:
+		base = 0x00003400;
+		break;
+	case 6:
+		base = 0x00002600;
+		break;
+	case 7:
+		base = 0x00003600;
+		break;
+	default:
+		break;
 	}
 
 	base = (uint)qe_immr + base;
 	return base;
 }
 
-void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode)
+void ucc_fast_enable(struct ucc_fast_priv *uccf, comm_dir_e mode)
 {
 	ucc_fast_t	*uf_regs;
 	u32		gumr;
@@ -236,7 +354,7 @@
 	out_be32(&uf_regs->gumr, gumr);
 }
 
-void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode)
+void ucc_fast_disable(struct ucc_fast_priv *uccf, comm_dir_e mode)
 {
 	ucc_fast_t	*uf_regs;
 	u32		gumr;
@@ -256,34 +374,35 @@
 	out_be32(&uf_regs->gumr, gumr);
 }
 
-int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t  **uccf_ret)
+int ucc_fast_init(struct ucc_fast_inf *uf_info,
+		  struct ucc_fast_priv **uccf_ret)
 {
-	ucc_fast_private_t	*uccf;
+	struct ucc_fast_priv	*uccf;
 	ucc_fast_t		*uf_regs;
 
 	if (!uf_info)
 		return -EINVAL;
 
-	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printf("%s: Illagal UCC number!\n", __FUNCTION__);
+	if (uf_info->ucc_num < 0 || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+		printf("%s: Illagal UCC number!\n", __func__);
 		return -EINVAL;
 	}
 
-	uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t));
+	uccf = (struct ucc_fast_priv *)malloc(sizeof(struct ucc_fast_priv));
 	if (!uccf) {
 		printf("%s: No memory for UCC fast data structure!\n",
-			 __FUNCTION__);
+		       __func__);
 		return -ENOMEM;
 	}
-	memset(uccf, 0, sizeof(ucc_fast_private_t));
+	memset(uccf, 0, sizeof(struct ucc_fast_priv));
 
 	/* Save fast UCC structure */
 	uccf->uf_info	= uf_info;
 	uccf->uf_regs	= (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num);
 
-	if (uccf->uf_regs == NULL) {
+	if (!uccf->uf_regs) {
 		printf("%s: No memory map for UCC fast controller!\n",
-			 __FUNCTION__);
+		       __func__);
 		return -ENOMEM;
 	}
 
@@ -291,8 +410,8 @@
 	uccf->enabled_rx	= 0;
 
 	uf_regs			= uccf->uf_regs;
-	uccf->p_ucce		= (u32 *) &(uf_regs->ucce);
-	uccf->p_uccm		= (u32 *) &(uf_regs->uccm);
+	uccf->p_ucce		= (u32 *)&uf_regs->ucce;
+	uccf->p_uccm		= (u32 *)&uf_regs->uccm;
 
 	/* Init GUEMR register, UCC both Rx and Tx is Fast protocol */
 	out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX
@@ -306,13 +425,13 @@
 		/* Allocate memory for Tx Virtual Fifo */
 		uccf->ucc_fast_tx_virtual_fifo_base_offset =
 		qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT,
-				 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+			       UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 
 		/* Allocate memory for Rx Virtual Fifo */
 		uccf->ucc_fast_rx_virtual_fifo_base_offset =
 		qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT +
-				 UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
-				UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+			       UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
+			       UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 
 		/* utfb, urfb are offsets from MURAM base */
 		out_be32(&uf_regs->utfb,
@@ -334,7 +453,7 @@
 		/* Allocate memory for Tx Virtual Fifo */
 		uccf->ucc_fast_tx_virtual_fifo_base_offset =
 		qe_muram_alloc(UCC_GETH_UTFS_INIT,
-				 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+			       UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 
 		/* Allocate memory for Rx Virtual Fifo */
 		uccf->ucc_fast_rx_virtual_fifo_base_offset =
@@ -360,9 +479,9 @@
 	/* Rx clock routing */
 	if (uf_info->rx_clock != QE_CLK_NONE) {
 		if (ucc_set_clk_src(uf_info->ucc_num,
-			 uf_info->rx_clock, COMM_DIR_RX)) {
+				    uf_info->rx_clock, COMM_DIR_RX)) {
 			printf("%s: Illegal value for parameter 'RxClock'.\n",
-				 __FUNCTION__);
+			       __func__);
 			return -EINVAL;
 		}
 	}
@@ -370,9 +489,9 @@
 	/* Tx clock routing */
 	if (uf_info->tx_clock != QE_CLK_NONE) {
 		if (ucc_set_clk_src(uf_info->ucc_num,
-			 uf_info->tx_clock, COMM_DIR_TX)) {
+				    uf_info->tx_clock, COMM_DIR_TX)) {
 			printf("%s: Illegal value for parameter 'TxClock'.\n",
-				 __FUNCTION__);
+			       __func__);
 			return -EINVAL;
 		}
 	}
diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h
index 4098c66..99f8458 100644
--- a/drivers/qe/uccf.h
+++ b/drivers/qe/uccf.h
@@ -13,25 +13,23 @@
 #include "linux/immap_qe.h"
 #include <fsl_qe.h>
 
-/* Fast or Giga ethernet
-*/
-typedef enum enet_type {
+/* Fast or Giga ethernet */
+enum enet_type {
 	FAST_ETH,
 	GIGA_ETH,
-} enet_type_e;
+};
 
-/* General UCC Extended Mode Register
-*/
+/* General UCC Extended Mode Register */
 #define UCC_GUEMR_MODE_MASK_RX		0x02
 #define UCC_GUEMR_MODE_MASK_TX		0x01
 #define UCC_GUEMR_MODE_FAST_RX		0x02
 #define UCC_GUEMR_MODE_FAST_TX		0x01
 #define UCC_GUEMR_MODE_SLOW_RX		0x00
 #define UCC_GUEMR_MODE_SLOW_TX		0x00
-#define UCC_GUEMR_SET_RESERVED3		0x10 /* Bit 3 must be set 1 */
+/* Bit 3 must be set 1 */
+#define UCC_GUEMR_SET_RESERVED3		0x10
 
-/* General UCC FAST Mode Register
-*/
+/* General UCC FAST Mode Register */
 #define UCC_FAST_GUMR_TCI		0x20000000
 #define UCC_FAST_GUMR_TRX		0x10000000
 #define UCC_FAST_GUMR_TTX		0x08000000
@@ -46,8 +44,7 @@
 #define UCC_FAST_GUMR_ENR		0x00000020
 #define UCC_FAST_GUMR_ENT		0x00000010
 
-/* GUMR [MODE] bit maps
-*/
+/* GUMR [MODE] bit maps */
 #define UCC_FAST_GUMR_HDLC		0x00000000
 #define UCC_FAST_GUMR_QMC		0x00000002
 #define UCC_FAST_GUMR_UART		0x00000004
@@ -55,50 +52,54 @@
 #define UCC_FAST_GUMR_ATM		0x0000000a
 #define UCC_FAST_GUMR_ETH		0x0000000c
 
-/* Transmit On Demand (UTORD)
-*/
+/* Transmit On Demand (UTORD) */
 #define UCC_SLOW_TOD			0x8000
 #define UCC_FAST_TOD			0x8000
 
-/* Fast Ethernet (10/100 Mbps)
-*/
-#define UCC_GETH_URFS_INIT		512        /* Rx virtual FIFO size */
-#define UCC_GETH_URFET_INIT		256        /* 1/2 urfs */
-#define UCC_GETH_URFSET_INIT		384        /* 3/4 urfs */
-#define UCC_GETH_UTFS_INIT		512        /* Tx virtual FIFO size */
-#define UCC_GETH_UTFET_INIT		256        /* 1/2 utfs */
+/* Fast Ethernet (10/100 Mbps) */
+/* Rx virtual FIFO size */
+#define UCC_GETH_URFS_INIT		512
+/* 1/2 urfs */
+#define UCC_GETH_URFET_INIT		256
+/* 3/4 urfs */
+#define UCC_GETH_URFSET_INIT		384
+/* Tx virtual FIFO size */
+#define UCC_GETH_UTFS_INIT		512
+/* 1/2 utfs */
+#define UCC_GETH_UTFET_INIT		256
 #define UCC_GETH_UTFTT_INIT		128
 
-/* Gigabit Ethernet (1000 Mbps)
-*/
-#define UCC_GETH_URFS_GIGA_INIT		4096/*2048*/    /* Rx virtual FIFO size */
-#define UCC_GETH_URFET_GIGA_INIT	2048/*1024*/    /* 1/2 urfs */
-#define UCC_GETH_URFSET_GIGA_INIT	3072/*1536*/    /* 3/4 urfs */
-#define UCC_GETH_UTFS_GIGA_INIT		8192/*2048*/    /* Tx virtual FIFO size */
-#define UCC_GETH_UTFET_GIGA_INIT	4096/*1024*/    /* 1/2 utfs */
-#define UCC_GETH_UTFTT_GIGA_INIT	0x400/*0x40*/   /*  */
+/* Gigabit Ethernet (1000 Mbps) */
+/* Rx virtual FIFO size */
+#define UCC_GETH_URFS_GIGA_INIT		4096/*2048*/
+/* 1/2 urfs */
+#define UCC_GETH_URFET_GIGA_INIT	2048/*1024*/
+/* 3/4 urfs */
+#define UCC_GETH_URFSET_GIGA_INIT	3072/*1536*/
+/* Tx virtual FIFO size */
+#define UCC_GETH_UTFS_GIGA_INIT		8192/*2048*/
+/* 1/2 utfs */
+#define UCC_GETH_UTFET_GIGA_INIT	4096/*1024*/
+#define UCC_GETH_UTFTT_GIGA_INIT	0x400/*0x40*/
 
-/* UCC fast alignment
-*/
+/* UCC fast alignment */
 #define UCC_FAST_RX_ALIGN			4
 #define UCC_FAST_MRBLR_ALIGNMENT		4
 #define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
 
-/* Sizes
-*/
+/* Sizes */
 #define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD	8
 
-/* UCC fast structure.
-*/
-typedef struct ucc_fast_info {
+/* UCC fast structure. */
+struct ucc_fast_inf {
 	int		ucc_num;
 	qe_clock_e	rx_clock;
 	qe_clock_e	tx_clock;
-	enet_type_e	eth_type;
-} ucc_fast_info_t;
+	enum enet_type	eth_type;
+};
 
-typedef struct ucc_fast_private {
-	ucc_fast_info_t	*uf_info;
+struct ucc_fast_priv {
+	struct ucc_fast_inf	*uf_info;
 	ucc_fast_t	*uf_regs; /* a pointer to memory map of UCC regs */
 	u32		*p_ucce; /* a pointer to the event register */
 	u32		*p_uccm; /* a pointer to the mask register */
@@ -106,12 +107,13 @@
 	int		enabled_rx; /* whether UCC is enabled for Rx (ENR) */
 	u32		ucc_fast_tx_virtual_fifo_base_offset;
 	u32		ucc_fast_rx_virtual_fifo_base_offset;
-} ucc_fast_private_t;
+};
 
-void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf);
+void ucc_fast_transmit_on_demand(struct ucc_fast_priv *uccf);
 u32 ucc_fast_get_qe_cr_subblock(int ucc_num);
-void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode);
-void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode);
-int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret);
+void ucc_fast_enable(struct ucc_fast_priv *uccf, comm_dir_e mode);
+void ucc_fast_disable(struct ucc_fast_priv *uccf, comm_dir_e mode);
+int ucc_fast_init(struct ucc_fast_inf *uf_info,
+		  struct ucc_fast_priv **uccf_ret);
 
 #endif /* __UCCF_H__ */
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 0143454..cfd5397 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -25,7 +25,7 @@
 #define CONFIG_UTBIPAR_INIT_TBIPA 0x1F
 #endif
 
-static uec_info_t uec_info[] = {
+static struct uec_inf uec_info[] = {
 #ifdef CONFIG_UEC_ETH1
 	STD_UEC_INFO(1),	/* UEC1 */
 #endif
@@ -56,13 +56,13 @@
 
 static struct eth_device *devlist[MAXCONTROLLERS];
 
-static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
+static int uec_mac_enable(struct uec_priv *uec, comm_dir_e mode)
 {
 	uec_t		*uec_regs;
 	u32		maccfg1;
 
 	if (!uec) {
-		printf("%s: uec not initial\n", __FUNCTION__);
+		printf("%s: uec not initial\n", __func__);
 		return -EINVAL;
 	}
 	uec_regs = uec->uec_regs;
@@ -84,13 +84,13 @@
 	return 0;
 }
 
-static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
+static int uec_mac_disable(struct uec_priv *uec, comm_dir_e mode)
 {
 	uec_t		*uec_regs;
 	u32		maccfg1;
 
 	if (!uec) {
-		printf("%s: uec not initial\n", __FUNCTION__);
+		printf("%s: uec not initial\n", __func__);
 		return -EINVAL;
 	}
 	uec_regs = uec->uec_regs;
@@ -112,14 +112,14 @@
 	return 0;
 }
 
-static int uec_graceful_stop_tx(uec_private_t *uec)
+static int uec_graceful_stop_tx(struct uec_priv *uec)
 {
 	ucc_fast_t		*uf_regs;
 	u32			cecr_subblock;
 	u32			ucce;
 
 	if (!uec || !uec->uccf) {
-		printf("%s: No handle passed.\n", __FUNCTION__);
+		printf("%s: No handle passed.\n", __func__);
 		return -EINVAL;
 	}
 
@@ -132,30 +132,30 @@
 	cecr_subblock =
 		 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 	qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
-			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+		     (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 
 	/* Wait for command to complete */
 	do {
 		ucce = in_be32(&uf_regs->ucce);
-	} while (! (ucce & UCCE_GRA));
+	} while (!(ucce & UCCE_GRA));
 
 	uec->grace_stopped_tx = 1;
 
 	return 0;
 }
 
-static int uec_graceful_stop_rx(uec_private_t *uec)
+static int uec_graceful_stop_rx(struct uec_priv *uec)
 {
 	u32		cecr_subblock;
 	u8		ack;
 
 	if (!uec) {
-		printf("%s: No handle passed.\n", __FUNCTION__);
+		printf("%s: No handle passed.\n", __func__);
 		return -EINVAL;
 	}
 
 	if (!uec->p_rx_glbl_pram) {
-		printf("%s: No init rx global parameter\n", __FUNCTION__);
+		printf("%s: No init rx global parameter\n", __func__);
 		return -EINVAL;
 	}
 
@@ -170,66 +170,66 @@
 		cecr_subblock =
 		 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 		qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
-				 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+			     (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 		ack = uec->p_rx_glbl_pram->rxgstpack;
-	} while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
+	} while (!(ack & GRACEFUL_STOP_ACKNOWLEDGE_RX));
 
 	uec->grace_stopped_rx = 1;
 
 	return 0;
 }
 
-static int uec_restart_tx(uec_private_t *uec)
+static int uec_restart_tx(struct uec_priv *uec)
 {
 	u32		cecr_subblock;
 
 	if (!uec || !uec->uec_info) {
-		printf("%s: No handle passed.\n", __FUNCTION__);
+		printf("%s: No handle passed.\n", __func__);
 		return -EINVAL;
 	}
 
 	cecr_subblock =
 	 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 	qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
-			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+		     (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 
 	uec->grace_stopped_tx = 0;
 
 	return 0;
 }
 
-static int uec_restart_rx(uec_private_t *uec)
+static int uec_restart_rx(struct uec_priv *uec)
 {
 	u32		cecr_subblock;
 
 	if (!uec || !uec->uec_info) {
-		printf("%s: No handle passed.\n", __FUNCTION__);
+		printf("%s: No handle passed.\n", __func__);
 		return -EINVAL;
 	}
 
 	cecr_subblock =
 	 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 	qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
-			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+		     (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 
 	uec->grace_stopped_rx = 0;
 
 	return 0;
 }
 
-static int uec_open(uec_private_t *uec, comm_dir_e mode)
+static int uec_open(struct uec_priv *uec, comm_dir_e mode)
 {
-	ucc_fast_private_t	*uccf;
+	struct ucc_fast_priv	*uccf;
 
 	if (!uec || !uec->uccf) {
-		printf("%s: No handle passed.\n", __FUNCTION__);
+		printf("%s: No handle passed.\n", __func__);
 		return -EINVAL;
 	}
 	uccf = uec->uccf;
 
 	/* check if the UCC number is in range. */
 	if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
-		printf("%s: ucc_num out of range.\n", __FUNCTION__);
+		printf("%s: ucc_num out of range.\n", __func__);
 		return -EINVAL;
 	}
 
@@ -240,36 +240,33 @@
 	ucc_fast_enable(uccf, mode);
 
 	/* RISC microcode start */
-	if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) {
+	if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx)
 		uec_restart_tx(uec);
-	}
-	if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) {
+	if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx)
 		uec_restart_rx(uec);
-	}
 
 	return 0;
 }
 
-static int uec_stop(uec_private_t *uec, comm_dir_e mode)
+static int uec_stop(struct uec_priv *uec, comm_dir_e mode)
 {
 	if (!uec || !uec->uccf) {
-		printf("%s: No handle passed.\n", __FUNCTION__);
+		printf("%s: No handle passed.\n", __func__);
 		return -EINVAL;
 	}
 
 	/* check if the UCC number is in range. */
 	if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
-		printf("%s: ucc_num out of range.\n", __FUNCTION__);
+		printf("%s: ucc_num out of range.\n", __func__);
 		return -EINVAL;
 	}
 	/* Stop any transmissions */
-	if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) {
+	if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx)
 		uec_graceful_stop_tx(uec);
-	}
+
 	/* Stop any receptions */
-	if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) {
+	if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx)
 		uec_graceful_stop_rx(uec);
-	}
 
 	/* Disable the UCC fast */
 	ucc_fast_disable(uec->uccf, mode);
@@ -280,13 +277,13 @@
 	return 0;
 }
 
-static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
+static int uec_set_mac_duplex(struct uec_priv *uec, int duplex)
 {
 	uec_t		*uec_regs;
 	u32		maccfg2;
 
 	if (!uec) {
-		printf("%s: uec not initial\n", __FUNCTION__);
+		printf("%s: uec not initial\n", __func__);
 		return -EINVAL;
 	}
 	uec_regs = uec->uec_regs;
@@ -306,8 +303,8 @@
 	return 0;
 }
 
-static int uec_set_mac_if_mode(uec_private_t *uec,
-		phy_interface_t if_mode, int speed)
+static int uec_set_mac_if_mode(struct uec_priv *uec,
+			       phy_interface_t if_mode, int speed)
 {
 	phy_interface_t		enet_if_mode;
 	uec_t			*uec_regs;
@@ -315,7 +312,7 @@
 	u32			maccfg2;
 
 	if (!uec) {
-		printf("%s: uec not initial\n", __FUNCTION__);
+		printf("%s: uec not initial\n", __func__);
 		return -EINVAL;
 	}
 
@@ -329,66 +326,62 @@
 	upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
 
 	switch (speed) {
-		case SPEED_10:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
-			switch (enet_if_mode) {
-				case PHY_INTERFACE_MODE_MII:
-					break;
-				case PHY_INTERFACE_MODE_RGMII:
-					upsmr |= (UPSMR_RPM | UPSMR_R10M);
-					break;
-				case PHY_INTERFACE_MODE_RMII:
-					upsmr |= (UPSMR_R10M | UPSMR_RMM);
-					break;
-				default:
-					return -EINVAL;
-					break;
-			}
+	case SPEED_10:
+		maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+		switch (enet_if_mode) {
+		case PHY_INTERFACE_MODE_MII:
 			break;
-		case SPEED_100:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
-			switch (enet_if_mode) {
-				case PHY_INTERFACE_MODE_MII:
-					break;
-				case PHY_INTERFACE_MODE_RGMII:
-					upsmr |= UPSMR_RPM;
-					break;
-				case PHY_INTERFACE_MODE_RMII:
-					upsmr |= UPSMR_RMM;
-					break;
-				default:
-					return -EINVAL;
-					break;
-			}
+		case PHY_INTERFACE_MODE_RGMII:
+			upsmr |= (UPSMR_RPM | UPSMR_R10M);
 			break;
-		case SPEED_1000:
-			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
-			switch (enet_if_mode) {
-				case PHY_INTERFACE_MODE_GMII:
-					break;
-				case PHY_INTERFACE_MODE_TBI:
-					upsmr |= UPSMR_TBIM;
-					break;
-				case PHY_INTERFACE_MODE_RTBI:
-					upsmr |= (UPSMR_RPM | UPSMR_TBIM);
-					break;
-				case PHY_INTERFACE_MODE_RGMII_RXID:
-				case PHY_INTERFACE_MODE_RGMII_TXID:
-				case PHY_INTERFACE_MODE_RGMII_ID:
-				case PHY_INTERFACE_MODE_RGMII:
-					upsmr |= UPSMR_RPM;
-					break;
-				case PHY_INTERFACE_MODE_SGMII:
-					upsmr |= UPSMR_SGMM;
-					break;
-				default:
-					return -EINVAL;
-					break;
-			}
+		case PHY_INTERFACE_MODE_RMII:
+			upsmr |= (UPSMR_R10M | UPSMR_RMM);
 			break;
 		default:
 			return -EINVAL;
+		}
+		break;
+	case SPEED_100:
+		maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+		switch (enet_if_mode) {
+		case PHY_INTERFACE_MODE_MII:
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			upsmr |= UPSMR_RPM;
 			break;
+		case PHY_INTERFACE_MODE_RMII:
+			upsmr |= UPSMR_RMM;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case SPEED_1000:
+		maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
+		switch (enet_if_mode) {
+		case PHY_INTERFACE_MODE_GMII:
+			break;
+		case PHY_INTERFACE_MODE_TBI:
+			upsmr |= UPSMR_TBIM;
+			break;
+		case PHY_INTERFACE_MODE_RTBI:
+			upsmr |= (UPSMR_RPM | UPSMR_TBIM);
+			break;
+		case PHY_INTERFACE_MODE_RGMII_RXID:
+		case PHY_INTERFACE_MODE_RGMII_TXID:
+		case PHY_INTERFACE_MODE_RGMII_ID:
+		case PHY_INTERFACE_MODE_RGMII:
+			upsmr |= UPSMR_RPM;
+			break;
+		case PHY_INTERFACE_MODE_SGMII:
+			upsmr |= UPSMR_SGMM;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
 	}
 
 	out_be32(&uec_regs->maccfg2, maccfg2);
@@ -407,9 +400,10 @@
 	out_be32(&uec_mii_regs->miimcfg, miimcfg);
 
 	/* Wait until the bus is free */
-	while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
+	while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--)
+		;
 	if (timeout <= 0) {
-		printf("%s: The MII Bus is stuck!", __FUNCTION__);
+		printf("%s: The MII Bus is stuck!", __func__);
 		return -ETIMEDOUT;
 	}
 
@@ -418,13 +412,13 @@
 
 static int init_phy(struct eth_device *dev)
 {
-	uec_private_t		*uec;
+	struct uec_priv		*uec;
 	uec_mii_t		*umii_regs;
 	struct uec_mii_info	*mii_info;
 	struct phy_info		*curphy;
 	int			err;
 
-	uec = (uec_private_t *)dev->priv;
+	uec = (struct uec_priv *)dev->priv;
 	umii_regs = uec->uec_mii_regs;
 
 	uec->oldlink = 0;
@@ -438,11 +432,10 @@
 	}
 	memset(mii_info, 0, sizeof(*mii_info));
 
-	if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
+	if (uec->uec_info->uf_info.eth_type == GIGA_ETH)
 		mii_info->speed = SPEED_1000;
-	} else {
+	else
 		mii_info->speed = SPEED_100;
-	}
 
 	mii_info->duplex = DUPLEX_FULL;
 	mii_info->pause = 0;
@@ -498,15 +491,14 @@
 
 static void adjust_link(struct eth_device *dev)
 {
-	uec_private_t		*uec = (uec_private_t *)dev->priv;
+	struct uec_priv		*uec = (struct uec_priv *)dev->priv;
 	struct uec_mii_info	*mii_info = uec->mii_info;
 
-	extern void change_phy_interface_mode(struct eth_device *dev,
-				 phy_interface_t mode, int speed);
-
 	if (mii_info->link) {
-		/* Now we make sure that we can be in full duplex mode.
-		* If not, we operate in half-duplex mode. */
+		/*
+		 * Now we make sure that we can be in full duplex mode.
+		 * If not, we operate in half-duplex mode.
+		 */
 		if (mii_info->duplex != uec->oldduplex) {
 			if (!(mii_info->duplex)) {
 				uec_set_mac_duplex(uec, DUPLEX_HALF);
@@ -526,16 +518,16 @@
 				case SPEED_1000:
 					break;
 				case SPEED_100:
-					printf ("switching to rgmii 100\n");
+					printf("switching to rgmii 100\n");
 					mode = PHY_INTERFACE_MODE_RGMII;
 					break;
 				case SPEED_10:
-					printf ("switching to rgmii 10\n");
+					printf("switching to rgmii 10\n");
 					mode = PHY_INTERFACE_MODE_RGMII;
 					break;
 				default:
 					printf("%s: Ack,Speed(%d)is illegal\n",
-						dev->name, mii_info->speed);
+					       dev->name, mii_info->speed);
 					break;
 				}
 			}
@@ -566,12 +558,12 @@
 
 static void phy_change(struct eth_device *dev)
 {
-	uec_private_t	*uec = (uec_private_t *)dev->priv;
+	struct uec_priv	*uec = (struct uec_priv *)dev->priv;
 
 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
-	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
+	/* QE9 and QE12 need to be set for enabling QE MII management signals */
 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
 #endif
@@ -604,14 +596,14 @@
 	int i;
 
 	for (i = 0; i < MAXCONTROLLERS; i++) {
-		if (strncmp(devname, devlist[i]->name, strlen(devname)) == 0) {
+		if (strncmp(devname, devlist[i]->name, strlen(devname)) == 0)
 			break;
-		}
 	}
 
 	/* If device cannot be found, returns -1 */
 	if (i == MAXCONTROLLERS) {
-		debug ("%s: device %s not found in devlist\n", __FUNCTION__, devname);
+		debug("%s: device %s not found in devlist\n", __func__,
+		      devname);
 		i = -1;
 	}
 
@@ -629,13 +621,12 @@
 	unsigned short value = 0;
 	int devindex = 0;
 
-	if (bus->name == NULL) {
-		debug("%s: NULL pointer given\n", __FUNCTION__);
+	if (!bus->name) {
+		debug("%s: NULL pointer given\n", __func__);
 	} else {
 		devindex = uec_miiphy_find_dev_by_name(bus->name);
-		if (devindex >= 0) {
+		if (devindex >= 0)
 			value = uec_read_phy_reg(devlist[devindex], addr, reg);
-		}
 	}
 	return value;
 }
@@ -651,36 +642,37 @@
 {
 	int devindex = 0;
 
-	if (bus->name == NULL) {
-		debug("%s: NULL pointer given\n", __FUNCTION__);
+	if (!bus->name) {
+		debug("%s: NULL pointer given\n", __func__);
 	} else {
 		devindex = uec_miiphy_find_dev_by_name(bus->name);
-		if (devindex >= 0) {
+		if (devindex >= 0)
 			uec_write_phy_reg(devlist[devindex], addr, reg, value);
-		}
 	}
 	return 0;
 }
 #endif
 
-static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
+static int uec_set_mac_address(struct uec_priv *uec, u8 *mac_addr)
 {
 	uec_t		*uec_regs;
 	u32		mac_addr1;
 	u32		mac_addr2;
 
 	if (!uec) {
-		printf("%s: uec not initial\n", __FUNCTION__);
+		printf("%s: uec not initial\n", __func__);
 		return -EINVAL;
 	}
 
 	uec_regs = uec->uec_regs;
 
-	/* if a station address of 0x12345678ABCD, perform a write to
-	MACSTNADDR1 of 0xCDAB7856,
-	MACSTNADDR2 of 0x34120000 */
+	/*
+	 * if a station address of 0x12345678ABCD, perform a write to
+	 * MACSTNADDR1 of 0xCDAB7856,
+	 * MACSTNADDR2 of 0x34120000
+	 */
 
-	mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
+	mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) |
 			(mac_addr[3] << 8)  | (mac_addr[2]);
 	out_be32(&uec_regs->macstnaddr1, mac_addr1);
 
@@ -690,31 +682,31 @@
 	return 0;
 }
 
-static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
-					 int *threads_num_ret)
+static int uec_convert_threads_num(enum uec_num_of_threads threads_num,
+				   int *threads_num_ret)
 {
 	int	num_threads_numerica;
 
 	switch (threads_num) {
-		case UEC_NUM_OF_THREADS_1:
-			num_threads_numerica = 1;
-			break;
-		case UEC_NUM_OF_THREADS_2:
-			num_threads_numerica = 2;
-			break;
-		case UEC_NUM_OF_THREADS_4:
-			num_threads_numerica = 4;
-			break;
-		case UEC_NUM_OF_THREADS_6:
-			num_threads_numerica = 6;
-			break;
-		case UEC_NUM_OF_THREADS_8:
-			num_threads_numerica = 8;
-			break;
-		default:
-			printf("%s: Bad number of threads value.",
-				 __FUNCTION__);
-			return -EINVAL;
+	case UEC_NUM_OF_THREADS_1:
+		num_threads_numerica = 1;
+		break;
+	case UEC_NUM_OF_THREADS_2:
+		num_threads_numerica = 2;
+		break;
+	case UEC_NUM_OF_THREADS_4:
+		num_threads_numerica = 4;
+		break;
+	case UEC_NUM_OF_THREADS_6:
+		num_threads_numerica = 6;
+		break;
+	case UEC_NUM_OF_THREADS_8:
+		num_threads_numerica = 8;
+		break;
+	default:
+		printf("%s: Bad number of threads value.",
+		       __func__);
+		return -EINVAL;
 	}
 
 	*threads_num_ret = num_threads_numerica;
@@ -722,9 +714,9 @@
 	return 0;
 }
 
-static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
+static void uec_init_tx_parameter(struct uec_priv *uec, int num_threads_tx)
 {
-	uec_info_t	*uec_info;
+	struct uec_inf	*uec_info;
 	u32		end_bd;
 	u8		bmrx = 0;
 	int		i;
@@ -732,14 +724,14 @@
 	uec_info = uec->uec_info;
 
 	/* Alloc global Tx parameter RAM page */
-	uec->tx_glbl_pram_offset = qe_muram_alloc(
-				sizeof(uec_tx_global_pram_t),
-				 UEC_TX_GLOBAL_PRAM_ALIGNMENT);
-	uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
+	uec->tx_glbl_pram_offset =
+		qe_muram_alloc(sizeof(struct uec_tx_global_pram),
+			       UEC_TX_GLOBAL_PRAM_ALIGNMENT);
+	uec->p_tx_glbl_pram = (struct uec_tx_global_pram *)
 				qe_muram_addr(uec->tx_glbl_pram_offset);
 
 	/* Zero the global Tx prameter RAM */
-	memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
+	memset(uec->p_tx_glbl_pram, 0, sizeof(struct uec_tx_global_pram));
 
 	/* Init global Tx parameter RAM */
 
@@ -747,10 +739,10 @@
 	out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
 
 	/* SQPTR */
-	uec->send_q_mem_reg_offset = qe_muram_alloc(
-				sizeof(uec_send_queue_qd_t),
-				 UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
-	uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
+	uec->send_q_mem_reg_offset =
+		qe_muram_alloc(sizeof(struct uec_send_queue_qd),
+			       UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
+	uec->p_send_q_mem_reg = (struct uec_send_queue_mem_region *)
 				qe_muram_addr(uec->send_q_mem_reg_offset);
 	out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
 
@@ -758,9 +750,9 @@
 	end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
 					 * SIZEOFBD;
 	out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
-				 (u32)(uec->p_tx_bd_ring));
+		 (u32)(uec->p_tx_bd_ring));
 	out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
-						 end_bd);
+		 end_bd);
 
 	/* Scheduler Base Pointer, we have only one Tx queue, no need it */
 	out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
@@ -773,54 +765,57 @@
 	out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
 
 	/* IPH_Offset */
-	for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) {
+	for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++)
 		out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
-	}
 
 	/* VTAG table */
-	for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) {
+	for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++)
 		out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
-	}
 
 	/* TQPTR */
-	uec->thread_dat_tx_offset = qe_muram_alloc(
-		num_threads_tx * sizeof(uec_thread_data_tx_t) +
-		 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
+	uec->thread_dat_tx_offset =
+		qe_muram_alloc(num_threads_tx *
+			       sizeof(struct uec_thread_data_tx) +
+			       32 * (num_threads_tx == 1),
+			       UEC_THREAD_DATA_ALIGNMENT);
 
-	uec->p_thread_data_tx = (uec_thread_data_tx_t *)
+	uec->p_thread_data_tx = (struct uec_thread_data_tx *)
 				qe_muram_addr(uec->thread_dat_tx_offset);
 	out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
 }
 
-static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
+static void uec_init_rx_parameter(struct uec_priv *uec, int num_threads_rx)
 {
 	u8	bmrx = 0;
 	int	i;
-	uec_82xx_address_filtering_pram_t	*p_af_pram;
+	struct uec_82xx_add_filtering_pram	*p_af_pram;
 
 	/* Allocate global Rx parameter RAM page */
-	uec->rx_glbl_pram_offset = qe_muram_alloc(
-		sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
-	uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
+	uec->rx_glbl_pram_offset =
+		qe_muram_alloc(sizeof(struct uec_rx_global_pram),
+			       UEC_RX_GLOBAL_PRAM_ALIGNMENT);
+	uec->p_rx_glbl_pram = (struct uec_rx_global_pram *)
 				qe_muram_addr(uec->rx_glbl_pram_offset);
 
 	/* Zero Global Rx parameter RAM */
-	memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
+	memset(uec->p_rx_glbl_pram, 0, sizeof(struct uec_rx_global_pram));
 
 	/* Init global Rx parameter RAM */
-	/* REMODER, Extended feature mode disable, VLAN disable,
-	 LossLess flow control disable, Receive firmware statisic disable,
-	 Extended address parsing mode disable, One Rx queues,
-	 Dynamic maximum/minimum frame length disable, IP checksum check
-	 disable, IP address alignment disable
-	*/
+	/*
+	 * REMODER, Extended feature mode disable, VLAN disable,
+	 * LossLess flow control disable, Receive firmware statisic disable,
+	 * Extended address parsing mode disable, One Rx queues,
+	 * Dynamic maximum/minimum frame length disable, IP checksum check
+	 * disable, IP address alignment disable
+	 */
 	out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
 
 	/* RQPTR */
-	uec->thread_dat_rx_offset = qe_muram_alloc(
-			num_threads_rx * sizeof(uec_thread_data_rx_t),
-			 UEC_THREAD_DATA_ALIGNMENT);
-	uec->p_thread_data_rx = (uec_thread_data_rx_t *)
+	uec->thread_dat_rx_offset =
+		qe_muram_alloc(num_threads_rx *
+			       sizeof(struct uec_thread_data_rx),
+			       UEC_THREAD_DATA_ALIGNMENT);
+	uec->p_thread_data_rx = (struct uec_thread_data_rx *)
 				qe_muram_addr(uec->thread_dat_rx_offset);
 	out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
 
@@ -841,16 +836,16 @@
 	out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
 
 	/* RBDQPTR */
-	uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
-				sizeof(uec_rx_bd_queues_entry_t) + \
-				sizeof(uec_rx_prefetched_bds_t),
-				 UEC_RX_BD_QUEUES_ALIGNMENT);
-	uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
+	uec->rx_bd_qs_tbl_offset =
+		qe_muram_alloc(sizeof(struct uec_rx_bd_queues_entry) +
+			       sizeof(struct uec_rx_pref_bds),
+			       UEC_RX_BD_QUEUES_ALIGNMENT);
+	uec->p_rx_bd_qs_tbl = (struct uec_rx_bd_queues_entry *)
 				qe_muram_addr(uec->rx_bd_qs_tbl_offset);
 
 	/* Zero it */
-	memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
-					sizeof(uec_rx_prefetched_bds_t));
+	memset(uec->p_rx_bd_qs_tbl, 0, sizeof(struct uec_rx_bd_queues_entry) +
+	       sizeof(struct uec_rx_pref_bds));
 	out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
 	out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
 		 (u32)uec->p_rx_bd_ring);
@@ -868,9 +863,8 @@
 	/* L2QT */
 	out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
 	/* L3QT */
-	for (i = 0; i < 8; i++)	{
+	for (i = 0; i < 8; i++)
 		out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
-	}
 
 	/* VLAN_TYPE */
 	out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
@@ -878,7 +872,7 @@
 	out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
 
 	/* Clear PQ2 style address filtering hash table */
-	p_af_pram = (uec_82xx_address_filtering_pram_t *) \
+	p_af_pram = (struct uec_82xx_add_filtering_pram *)
 			uec->p_rx_glbl_pram->addressfiltering;
 
 	p_af_pram->iaddr_h = 0;
@@ -887,30 +881,33 @@
 	p_af_pram->gaddr_l = 0;
 }
 
-static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
-					 int thread_tx, int thread_rx)
+static int uec_issue_init_enet_rxtx_cmd(struct uec_priv *uec,
+					int thread_tx, int thread_rx)
 {
-	uec_init_cmd_pram_t		*p_init_enet_param;
+	struct uec_init_cmd_pram		*p_init_enet_param;
 	u32				init_enet_param_offset;
-	uec_info_t			*uec_info;
+	struct uec_inf			*uec_info;
+	struct ucc_fast_inf			*uf_info;
 	int				i;
 	int				snum;
-	u32				init_enet_offset;
+	u32				off;
 	u32				entry_val;
 	u32				command;
 	u32				cecr_subblock;
 
 	uec_info = uec->uec_info;
+	uf_info = &uec_info->uf_info;
 
 	/* Allocate init enet command parameter */
-	uec->init_enet_param_offset = qe_muram_alloc(
-					sizeof(uec_init_cmd_pram_t), 4);
+	uec->init_enet_param_offset =
+		qe_muram_alloc(sizeof(struct uec_init_cmd_pram), 4);
 	init_enet_param_offset = uec->init_enet_param_offset;
-	uec->p_init_enet_param = (uec_init_cmd_pram_t *)
+	uec->p_init_enet_param = (struct uec_init_cmd_pram *)
 				qe_muram_addr(uec->init_enet_param_offset);
 
 	/* Zero init enet command struct */
-	memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
+	memset((void *)uec->p_init_enet_param, 0,
+	       sizeof(struct uec_init_cmd_pram));
 
 	/* Init the command struct */
 	p_init_enet_param = uec->p_init_enet_param;
@@ -932,21 +929,21 @@
 
 	/* Init Rx threads */
 	for (i = 0; i < (thread_rx + 1); i++) {
-		if ((snum = qe_get_snum()) < 0) {
-			printf("%s can not get snum\n", __FUNCTION__);
+		snum = qe_get_snum();
+		if (snum < 0) {
+			printf("%s can not get snum\n", __func__);
 			return -ENOMEM;
 		}
 
-		if (i==0) {
-			init_enet_offset = 0;
+		if (i == 0) {
+			off = 0;
 		} else {
-			init_enet_offset = qe_muram_alloc(
-					sizeof(uec_thread_rx_pram_t),
-					 UEC_THREAD_RX_PRAM_ALIGNMENT);
+			off = qe_muram_alloc(sizeof(struct uec_thread_rx_pram),
+					     UEC_THREAD_RX_PRAM_ALIGNMENT);
 		}
 
 		entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
-				 init_enet_offset | (u32)uec_info->risc_rx;
+				 off | (u32)uec_info->risc_rx;
 		p_init_enet_param->rxthread[i] = entry_val;
 	}
 
@@ -956,16 +953,17 @@
 
 	/* Init Tx threads */
 	for (i = 0; i < thread_tx; i++) {
-		if ((snum = qe_get_snum()) < 0)	{
-			printf("%s can not get snum\n", __FUNCTION__);
+		snum = qe_get_snum();
+		if (snum  < 0)	{
+			printf("%s can not get snum\n", __func__);
 			return -ENOMEM;
 		}
 
-		init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
-						 UEC_THREAD_TX_PRAM_ALIGNMENT);
+		off = qe_muram_alloc(sizeof(struct uec_thread_tx_pram),
+				     UEC_THREAD_TX_PRAM_ALIGNMENT);
 
 		entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
-				 init_enet_offset | (u32)uec_info->risc_tx;
+				 off | (u32)uec_info->risc_tx;
 		p_init_enet_param->txthread[i] = entry_val;
 	}
 
@@ -973,19 +971,18 @@
 
 	/* Issue QE command */
 	command = QE_INIT_TX_RX;
-	cecr_subblock =	ucc_fast_get_qe_cr_subblock(
-				uec->uec_info->uf_info.ucc_num);
-	qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
-						 init_enet_param_offset);
+	cecr_subblock =	ucc_fast_get_qe_cr_subblock(uf_info->ucc_num);
+	qe_issue_cmd(command, cecr_subblock, (u8)QE_CR_PROTOCOL_ETHERNET,
+		     init_enet_param_offset);
 
 	return 0;
 }
 
-static int uec_startup(uec_private_t *uec)
+static int uec_startup(struct uec_priv *uec)
 {
-	uec_info_t			*uec_info;
-	ucc_fast_info_t			*uf_info;
-	ucc_fast_private_t		*uccf;
+	struct uec_inf			*uec_info;
+	struct ucc_fast_inf		*uf_info;
+	struct ucc_fast_priv		*uccf;
 	ucc_fast_t			*uf_regs;
 	uec_t				*uec_regs;
 	int				num_threads_tx;
@@ -993,37 +990,37 @@
 	u32				utbipar;
 	u32				length;
 	u32				align;
-	qe_bd_t				*bd;
+	struct buffer_descriptor	*bd;
 	u8				*buf;
 	int				i;
 
 	if (!uec || !uec->uec_info) {
-		printf("%s: uec or uec_info not initial\n", __FUNCTION__);
+		printf("%s: uec or uec_info not initial\n", __func__);
 		return -EINVAL;
 	}
 
 	uec_info = uec->uec_info;
-	uf_info = &(uec_info->uf_info);
+	uf_info = &uec_info->uf_info;
 
 	/* Check if Rx BD ring len is illegal */
-	if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
-		(uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
+	if (uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN ||
+	    (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
 		printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
-			 __FUNCTION__);
+		       __func__);
 		return -EINVAL;
 	}
 
 	/* Check if Tx BD ring len is illegal */
 	if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
 		printf("%s: Tx BD ring length must not be smaller than 2.\n",
-			 __FUNCTION__);
+		       __func__);
 		return -EINVAL;
 	}
 
 	/* Check if MRBLR is illegal */
-	if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN  % UEC_MRBLR_ALIGNMENT)) {
+	if (MAX_RXBUF_LEN == 0 || MAX_RXBUF_LEN  % UEC_MRBLR_ALIGNMENT) {
 		printf("%s: max rx buffer length must be mutliple of 128.\n",
-			 __FUNCTION__);
+		       __func__);
 		return -EINVAL;
 	}
 
@@ -1033,7 +1030,7 @@
 
 	/* Init UCC fast */
 	if (ucc_fast_init(uf_info, &uccf)) {
-		printf("%s: failed to init ucc fast\n", __FUNCTION__);
+		printf("%s: failed to init ucc fast\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -1042,13 +1039,13 @@
 
 	/* Convert the Tx threads number */
 	if (uec_convert_threads_num(uec_info->num_threads_tx,
-					 &num_threads_tx)) {
+				    &num_threads_tx)) {
 		return -EINVAL;
 	}
 
 	/* Convert the Rx threads number */
 	if (uec_convert_threads_num(uec_info->num_threads_rx,
-					 &num_threads_rx)) {
+				    &num_threads_rx)) {
 		return -EINVAL;
 	}
 
@@ -1070,13 +1067,14 @@
 	out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
 
 	/* Setup MAC interface mode */
-	uec_set_mac_if_mode(uec, uec_info->enet_interface_type, uec_info->speed);
+	uec_set_mac_if_mode(uec, uec_info->enet_interface_type,
+			    uec_info->speed);
 
 	/* Setup MII management base */
 #ifndef CONFIG_eTSEC_MDIO_BUS
 	uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg);
 #else
-	uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS;
+	uec->uec_mii_regs = (uec_mii_t *)CONFIG_MIIM_ADDRESS;
 #endif
 
 	/* Setup MII master clock source */
@@ -1093,16 +1091,16 @@
 	out_be32(&uec_regs->utbipar, utbipar);
 
 	/* Configure the TBI for SGMII operation */
-	if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
-	   (uec->uec_info->speed == SPEED_1000)) {
+	if (uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII &&
+	    uec->uec_info->speed == SPEED_1000) {
 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
-			ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+				  ENET_TBI_MII_ANA, TBIANA_SETTINGS);
 
 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
-			ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+				  ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
 
 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
-			ENET_TBI_MII_CR, TBICR_SETTINGS);
+				  ENET_TBI_MII_CR, TBICR_SETTINGS);
 	}
 
 	/* Allocate Tx BDs */
@@ -1149,29 +1147,29 @@
 	memset((void *)(uec->rx_buf_offset), 0, length + align);
 
 	/* Init TxBD ring */
-	bd = (qe_bd_t *)uec->p_tx_bd_ring;
-	uec->txBd = bd;
+	bd = (struct buffer_descriptor *)uec->p_tx_bd_ring;
+	uec->tx_bd = bd;
 
 	for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
 		BD_DATA_CLEAR(bd);
 		BD_STATUS_SET(bd, 0);
 		BD_LENGTH_SET(bd, 0);
-		bd ++;
+		bd++;
 	}
-	BD_STATUS_SET((--bd), TxBD_WRAP);
+	BD_STATUS_SET((--bd), TX_BD_WRAP);
 
 	/* Init RxBD ring */
-	bd = (qe_bd_t *)uec->p_rx_bd_ring;
-	uec->rxBd = bd;
+	bd = (struct buffer_descriptor *)uec->p_rx_bd_ring;
+	uec->rx_bd = bd;
 	buf = uec->p_rx_buf;
 	for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
 		BD_DATA_SET(bd, buf);
 		BD_LENGTH_SET(bd, 0);
-		BD_STATUS_SET(bd, RxBD_EMPTY);
+		BD_STATUS_SET(bd, RX_BD_EMPTY);
 		buf += MAX_RXBUF_LEN;
-		bd ++;
+		bd++;
 	}
-	BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
+	BD_STATUS_SET((--bd), RX_BD_WRAP | RX_BD_EMPTY);
 
 	/* Init global Tx parameter RAM */
 	uec_init_tx_parameter(uec, num_threads_tx);
@@ -1182,29 +1180,32 @@
 	/* Init ethernet Tx and Rx parameter command */
 	if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
 					 num_threads_rx)) {
-		printf("%s issue init enet cmd failed\n", __FUNCTION__);
+		printf("%s issue init enet cmd failed\n", __func__);
 		return -ENOMEM;
 	}
 
 	return 0;
 }
 
-static int uec_init(struct eth_device* dev, struct bd_info *bd)
+static int uec_init(struct eth_device *dev, struct bd_info *bd)
 {
-	uec_private_t		*uec;
+	struct uec_priv		*uec;
 	int			err, i;
 	struct phy_info         *curphy;
 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 
-	uec = (uec_private_t *)dev->priv;
+	uec = (struct uec_priv *)dev->priv;
 
-	if (uec->the_first_run == 0) {
+	if (!uec->the_first_run) {
 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
-	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
-	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
-	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
+		/*
+		 * QE9 and QE12 need to be set for enabling QE MII
+		 * management signals
+		 */
+		setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
+		setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
 #endif
 
 		err = init_phy(dev);
@@ -1230,7 +1231,7 @@
 			err = curphy->read_status(uec->mii_info);
 			if (!(((i-- > 0) && !uec->mii_info->link) || err))
 				break;
-			udelay(100000);
+			mdelay(100);
 		} while (1);
 
 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
@@ -1248,12 +1249,11 @@
 	/* Set up the MAC address */
 	if (dev->enetaddr[0] & 0x01) {
 		printf("%s: MacAddress is multcast address\n",
-			 __FUNCTION__);
+		       __func__);
 		return -1;
 	}
 	uec_set_mac_address(uec, dev->enetaddr);
 
-
 	err = uec_open(uec, COMM_DIR_RX_AND_TX);
 	if (err) {
 		printf("%s: cannot enable UEC device\n", dev->name);
@@ -1262,30 +1262,31 @@
 
 	phy_change(dev);
 
-	return (uec->mii_info->link ? 0 : -1);
+	return uec->mii_info->link ? 0 : -1;
 }
 
-static void uec_halt(struct eth_device* dev)
+static void uec_halt(struct eth_device *dev)
 {
-	uec_private_t	*uec = (uec_private_t *)dev->priv;
+	struct uec_priv	*uec = (struct uec_priv *)dev->priv;
+
 	uec_stop(uec, COMM_DIR_RX_AND_TX);
 }
 
 static int uec_send(struct eth_device *dev, void *buf, int len)
 {
-	uec_private_t		*uec;
-	ucc_fast_private_t	*uccf;
-	volatile qe_bd_t	*bd;
+	struct uec_priv		*uec;
+	struct ucc_fast_priv	*uccf;
+	struct buffer_descriptor	*bd;
 	u16			status;
 	int			i;
 	int			result = 0;
 
-	uec = (uec_private_t *)dev->priv;
+	uec = (struct uec_priv *)dev->priv;
 	uccf = uec->uccf;
-	bd = uec->txBd;
+	bd = uec->tx_bd;
 
 	/* Find an empty TxBD */
-	for (i = 0; bd->status & TxBD_READY; i++) {
+	for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) {
 		if (i > 0x100000) {
 			printf("%s: tx buffer not ready\n", dev->name);
 			return result;
@@ -1295,16 +1296,16 @@
 	/* Init TxBD */
 	BD_DATA_SET(bd, buf);
 	BD_LENGTH_SET(bd, len);
-	status = bd->status;
+	status = BD_STATUS(bd);
 	status &= BD_WRAP;
-	status |= (TxBD_READY | TxBD_LAST);
+	status |= (TX_BD_READY | TX_BD_LAST);
 	BD_STATUS_SET(bd, status);
 
 	/* Tell UCC to transmit the buffer */
 	ucc_fast_transmit_on_demand(uccf);
 
 	/* Wait for buffer to be transmitted */
-	for (i = 0; bd->status & TxBD_READY; i++) {
+	for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) {
 		if (i > 0x100000) {
 			printf("%s: tx error\n", dev->name);
 			return result;
@@ -1313,25 +1314,25 @@
 
 	/* Ok, the buffer be transimitted */
 	BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
-	uec->txBd = bd;
+	uec->tx_bd = bd;
 	result = 1;
 
 	return result;
 }
 
-static int uec_recv(struct eth_device* dev)
+static int uec_recv(struct eth_device *dev)
 {
-	uec_private_t		*uec = dev->priv;
-	volatile qe_bd_t	*bd;
+	struct uec_priv		*uec = dev->priv;
+	struct buffer_descriptor	*bd;
 	u16			status;
 	u16			len;
 	u8			*data;
 
-	bd = uec->rxBd;
-	status = bd->status;
+	bd = uec->rx_bd;
+	status = BD_STATUS(bd);
 
-	while (!(status & RxBD_EMPTY)) {
-		if (!(status & RxBD_ERROR)) {
+	while (!(status & RX_BD_EMPTY)) {
+		if (!(status & RX_BD_ERROR)) {
 			data = BD_DATA(bd);
 			len = BD_LENGTH(bd);
 			net_process_received_packet(data, len);
@@ -1340,20 +1341,20 @@
 		}
 		status &= BD_CLEAN;
 		BD_LENGTH_SET(bd, 0);
-		BD_STATUS_SET(bd, status | RxBD_EMPTY);
+		BD_STATUS_SET(bd, status | RX_BD_EMPTY);
 		BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
-		status = bd->status;
+		status = BD_STATUS(bd);
 	}
-	uec->rxBd = bd;
+	uec->rx_bd = bd;
 
 	return 1;
 }
 
-int uec_initialize(struct bd_info *bis, uec_info_t *uec_info)
+int uec_initialize(struct bd_info *bis, struct uec_inf *uec_info)
 {
 	struct eth_device	*dev;
 	int			i;
-	uec_private_t		*uec;
+	struct uec_priv		*uec;
 	int			err;
 
 	dev = (struct eth_device *)malloc(sizeof(struct eth_device));
@@ -1362,11 +1363,11 @@
 	memset(dev, 0, sizeof(struct eth_device));
 
 	/* Allocate the UEC private struct */
-	uec = (uec_private_t *)malloc(sizeof(uec_private_t));
-	if (!uec) {
+	uec = (struct uec_priv *)malloc(sizeof(struct uec_priv));
+	if (!uec)
 		return -ENOMEM;
-	}
-	memset(uec, 0, sizeof(uec_private_t));
+
+	memset(uec, 0, sizeof(struct uec_priv));
 
 	/* Adjust uec_info */
 #if (MAX_QE_RISC == 4)
@@ -1395,13 +1396,14 @@
 
 	err = uec_startup(uec);
 	if (err) {
-		printf("%s: Cannot configure net device, aborting.",dev->name);
+		printf("%s: Cannot configure net device, aborting.", dev->name);
 		return err;
 	}
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 	int retval;
 	struct mii_dev *mdiodev = mdio_alloc();
+
 	if (!mdiodev)
 		return -ENOMEM;
 	strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
@@ -1416,7 +1418,7 @@
 	return 1;
 }
 
-int uec_eth_init(struct bd_info *bis, uec_info_t *uecs, int num)
+int uec_eth_init(struct bd_info *bis, struct uec_inf *uecs, int num)
 {
 	int i;
 
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 6de2ac4..83461c0 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -76,8 +76,7 @@
 #define MACCFG2_INIT_VALUE	(MACCFG2_PREL | MACCFG2_RESERVED_1 | \
 				 MACCFG2_LC | MACCFG2_PAD_CRC | MACCFG2_FDX)
 
-/* UEC Event Register
-*/
+/* UEC Event Register */
 #define UCCE_MPD				0x80000000
 #define UCCE_SCAR				0x40000000
 #define UCCE_GRA				0x20000000
@@ -120,26 +119,24 @@
 #define UCCE_OTHER	(UCCE_SCAR | UCCE_GRA  | UCCE_CBPR | UCCE_BSY  | \
 			 UCCE_RXC  | UCCE_TXC  | UCCE_TXE)
 
-/* UEC TEMODR Register
-*/
+/* UEC TEMODR Register */
 #define TEMODER_SCHEDULER_ENABLE		0x2000
 #define TEMODER_IP_CHECKSUM_GENERATE		0x0400
 #define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1	0x0200
 #define TEMODER_RMON_STATISTICS			0x0100
-#define TEMODER_NUM_OF_QUEUES_SHIFT		(15-15)
+#define TEMODER_NUM_OF_QUEUES_SHIFT		(15 - 15)
 
 #define TEMODER_INIT_VALUE			0xc000
 
-/* UEC REMODR Register
-*/
+/* UEC REMODR Register */
 #define REMODER_RX_RMON_STATISTICS_ENABLE	0x00001000
 #define REMODER_RX_EXTENDED_FEATURES		0x80000000
-#define REMODER_VLAN_OPERATION_TAGGED_SHIFT	(31-9 )
-#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT	(31-10)
-#define REMODER_RX_QOS_MODE_SHIFT		(31-15)
+#define REMODER_VLAN_OPERATION_TAGGED_SHIFT	(31 - 9)
+#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT	(31 - 10)
+#define REMODER_RX_QOS_MODE_SHIFT		(31 - 15)
 #define REMODER_RMON_STATISTICS			0x00001000
 #define REMODER_RX_EXTENDED_FILTERING		0x00000800
-#define REMODER_NUM_OF_QUEUES_SHIFT		(31-23)
+#define REMODER_NUM_OF_QUEUES_SHIFT		(31 - 23)
 #define REMODER_DYNAMIC_MAX_FRAME_LENGTH	0x00000008
 #define REMODER_DYNAMIC_MIN_FRAME_LENGTH	0x00000004
 #define REMODER_IP_CHECKSUM_CHECK		0x00000002
@@ -213,35 +210,31 @@
 #define UESCR_SCOV_SHIFT			(15 - 15)
 
 /****** Tx data struct collection ******/
-/* Tx thread data, each Tx thread has one this struct.
-*/
-typedef struct uec_thread_data_tx {
+/* Tx thread data, each Tx thread has one this struct. */
+struct uec_thread_data_tx {
 	u8   res0[136];
-} __attribute__ ((packed)) uec_thread_data_tx_t;
+} __packed;
 
-/* Tx thread parameter, each Tx thread has one this struct.
-*/
-typedef struct uec_thread_tx_pram {
+/* Tx thread parameter, each Tx thread has one this struct. */
+struct uec_thread_tx_pram {
 	u8   res0[64];
-} __attribute__ ((packed)) uec_thread_tx_pram_t;
+} __packed;
 
-/* Send queue queue-descriptor, each Tx queue has one this QD
-*/
-typedef struct uec_send_queue_qd {
+/* Send queue queue-descriptor, each Tx queue has one this QD */
+struct uec_send_queue_qd {
 	u32    bd_ring_base; /* pointer to BD ring base address */
 	u8     res0[0x8];
 	u32    last_bd_completed_address; /* last entry in BD ring */
 	u8     res1[0x30];
-} __attribute__ ((packed)) uec_send_queue_qd_t;
+} __packed;
 
 /* Send queue memory region */
-typedef struct uec_send_queue_mem_region {
-	uec_send_queue_qd_t   sqqd[MAX_TX_QUEUES];
-} __attribute__ ((packed)) uec_send_queue_mem_region_t;
+struct uec_send_queue_mem_region {
+	struct uec_send_queue_qd   sqqd[MAX_TX_QUEUES];
+} __packed;
 
-/* Scheduler struct
-*/
-typedef struct uec_scheduler {
+/* Scheduler struct */
+struct uec_scheduler {
 	u16  cpucount0;        /* CPU packet counter */
 	u16  cpucount1;        /* CPU packet counter */
 	u16  cecount0;         /* QE  packet counter */
@@ -272,12 +265,11 @@
 	u8   oldwfqmask;       /* temporary variable handled by QE */
 	u8   weightfactor[MAX_TX_QUEUES]; /**< weight factor for queues */
 	u32  minw;             /* temporary variable handled by QE */
-	u8   res1[0x70-0x64];
-} __attribute__ ((packed)) uec_scheduler_t;
+	u8   res1[0x70 - 0x64];
+} __packed;
 
-/* Tx firmware counters
-*/
-typedef struct uec_tx_firmware_statistics_pram {
+/* Tx firmware counters */
+struct uec_tx_firmware_statistics_pram {
 	u32  sicoltx;            /* single collision */
 	u32  mulcoltx;           /* multiple collision */
 	u32  latecoltxfr;        /* late collision */
@@ -290,13 +282,12 @@
 	u32  txpkts512;          /* total packets(including bad) 512~1023B */
 	u32  txpkts1024;         /* total packets(including bad) 1024~1518B */
 	u32  txpktsjumbo;        /* total packets(including bad)  >1024 */
-} __attribute__ ((packed)) uec_tx_firmware_statistics_pram_t;
+} __packed;
 
-/* Tx global parameter table
-*/
-typedef struct uec_tx_global_pram {
+/* Tx global parameter table */
+struct uec_tx_global_pram {
 	u16  temoder;
-	u8   res0[0x38-0x02];
+	u8   res0[0x38 - 0x02];
 	u32  sqptr;
 	u32  schedulerbasepointer;
 	u32  txrmonbaseptr;
@@ -304,26 +295,22 @@
 	u8   iphoffset[MAX_IPH_OFFSET_ENTRY];
 	u32  vtagtable[0x8];
 	u32  tqptr;
-	u8   res2[0x80-0x74];
-} __attribute__ ((packed)) uec_tx_global_pram_t;
-
+	u8   res2[0x80 - 0x74];
+} __packed;
 
 /****** Rx data struct collection ******/
-/* Rx thread data, each Rx thread has one this struct.
-*/
-typedef struct uec_thread_data_rx {
+/* Rx thread data, each Rx thread has one this struct. */
+struct uec_thread_data_rx {
 	u8   res0[40];
-} __attribute__ ((packed)) uec_thread_data_rx_t;
+} __packed;
 
-/* Rx thread parameter, each Rx thread has one this struct.
-*/
-typedef struct uec_thread_rx_pram {
+/* Rx thread parameter, each Rx thread has one this struct. */
+struct uec_thread_rx_pram {
 	u8   res0[128];
-} __attribute__ ((packed)) uec_thread_rx_pram_t;
+} __packed;
 
-/* Rx firmware counters
-*/
-typedef struct uec_rx_firmware_statistics_pram {
+/* Rx firmware counters */
+struct uec_rx_firmware_statistics_pram {
 	u32   frrxfcser;         /* frames with crc error */
 	u32   fraligner;         /* frames with alignment error */
 	u32   inrangelenrxer;    /* in range length error */
@@ -346,44 +333,41 @@
 	u32   removevlan;
 	u32   replacevlan;
 	u32   insertvlan;
-} __attribute__ ((packed)) uec_rx_firmware_statistics_pram_t;
+} __packed;
 
-/* Rx interrupt coalescing entry, each Rx queue has one this entry.
-*/
-typedef struct uec_rx_interrupt_coalescing_entry {
+/* Rx interrupt coalescing entry, each Rx queue has one this entry. */
+struct uec_rx_interrupt_coalescing_entry {
 	u32   maxvalue;
 	u32   counter;
-} __attribute__ ((packed)) uec_rx_interrupt_coalescing_entry_t;
+} __packed;
 
-typedef struct uec_rx_interrupt_coalescing_table {
-	uec_rx_interrupt_coalescing_entry_t   entry[MAX_RX_QUEUES];
-} __attribute__ ((packed)) uec_rx_interrupt_coalescing_table_t;
+struct uec_rx_interrupt_coalescing_table {
+	struct uec_rx_interrupt_coalescing_entry   entry[MAX_RX_QUEUES];
+} __packed;
 
-/* RxBD queue entry, each Rx queue has one this entry.
-*/
-typedef struct uec_rx_bd_queues_entry {
+/* RxBD queue entry, each Rx queue has one this entry. */
+struct uec_rx_bd_queues_entry {
 	u32   bdbaseptr;         /* BD base pointer          */
 	u32   bdptr;             /* BD pointer               */
 	u32   externalbdbaseptr; /* external BD base pointer */
 	u32   externalbdptr;     /* external BD pointer      */
-} __attribute__ ((packed)) uec_rx_bd_queues_entry_t;
+} __packed;
 
-/* Rx global paramter table
-*/
-typedef struct uec_rx_global_pram {
+/* Rx global parameter table */
+struct uec_rx_global_pram {
 	u32  remoder;             /* ethernet mode reg. */
 	u32  rqptr;               /* base pointer to the Rx Queues */
 	u32  res0[0x1];
-	u8   res1[0x20-0xC];
+	u8   res1[0x20 - 0xc];
 	u16  typeorlen;
 	u8   res2[0x1];
 	u8   rxgstpack;           /* ack on GRACEFUL STOP RX command */
 	u32  rxrmonbaseptr;       /* Rx RMON statistics base */
-	u8   res3[0x30-0x28];
+	u8   res3[0x30 - 0x28];
 	u32  intcoalescingptr;    /* Interrupt coalescing table pointer */
-	u8   res4[0x36-0x34];
+	u8   res4[0x36 - 0x34];
 	u8   rstate;
-	u8   res5[0x46-0x37];
+	u8   res5[0x46 - 0x37];
 	u16  mrblr;               /* max receive buffer length reg. */
 	u32  rbdqptr;             /* RxBD parameter table description */
 	u16  mflr;                /* max frame length reg. */
@@ -396,17 +380,15 @@
 	u16  vlantype;            /* vlan type */
 	u16  vlantci;             /* default vlan tci */
 	u8   addressfiltering[64];/* address filtering data structure */
-	u32  exfGlobalParam;      /* extended filtering global parameters */
-	u8   res6[0x100-0xC4];    /* Initialize to zero */
-} __attribute__ ((packed)) uec_rx_global_pram_t;
+	u32  exf_global_param;      /* extended filtering global parameters */
+	u8   res6[0x100 - 0xc4];    /* Initialize to zero */
+} __packed;
 
 #define GRACEFUL_STOP_ACKNOWLEDGE_RX            0x01
 
-
 /****** UEC common ******/
-/* UCC statistics - hardware counters
-*/
-typedef struct uec_hardware_statistics {
+/* UCC statistics - hardware counters */
+struct uec_hardware_statistics {
 	u32 tx64;
 	u32 tx127;
 	u32 tx255;
@@ -422,11 +404,10 @@
 	u32 rbyt;
 	u32 rmca;
 	u32 rbca;
-} __attribute__ ((packed)) uec_hardware_statistics_t;
+} __packed;
 
-/* InitEnet command parameter
-*/
-typedef struct uec_init_cmd_pram {
+/* InitEnet command parameter */
+struct uec_init_cmd_pram {
 	u8   resinit0;
 	u8   resinit1;
 	u8   resinit2;
@@ -440,7 +421,7 @@
 	u32  txglobal;				   /* tx global  */
 	u32  txthread[MAX_ENET_INIT_PARAM_ENTRIES_TX]; /* tx threads */
 	u8   res3[0x1];
-} __attribute__ ((packed)) uec_init_cmd_pram_t;
+} __packed;
 
 #define ENET_INIT_PARAM_RGF_SHIFT		(32 - 4)
 #define ENET_INIT_PARAM_TGF_SHIFT		(32 - 8)
@@ -456,105 +437,96 @@
 #define ENET_INIT_PARAM_MAGIC_RES_INIT3		0x00
 #define ENET_INIT_PARAM_MAGIC_RES_INIT4		0x0400
 
-/* structure representing 82xx Address Filtering Enet Address in PRAM
-*/
-typedef struct uec_82xx_enet_address {
+/* structure representing 82xx Address Filtering Enet Address in PRAM */
+struct uec_82xx_enet_addr {
 	u8   res1[0x2];
 	u16  h;       /* address (MSB) */
 	u16  m;       /* address       */
 	u16  l;       /* address (LSB) */
-} __attribute__ ((packed)) uec_82xx_enet_address_t;
+} __packed;
 
-/* structure representing 82xx Address Filtering PRAM
-*/
-typedef struct uec_82xx_address_filtering_pram {
+/* structure representing 82xx Address Filtering PRAM */
+struct uec_82xx_add_filtering_pram {
 	u32  iaddr_h;        /* individual address filter, high */
 	u32  iaddr_l;        /* individual address filter, low  */
 	u32  gaddr_h;        /* group address filter, high      */
 	u32  gaddr_l;        /* group address filter, low       */
-	uec_82xx_enet_address_t    taddr;
-	uec_82xx_enet_address_t    paddr[4];
-	u8                         res0[0x40-0x38];
-} __attribute__ ((packed)) uec_82xx_address_filtering_pram_t;
+	struct uec_82xx_enet_addr    taddr;
+	struct uec_82xx_enet_addr    paddr[4];
+	u8                         res0[0x40 - 0x38];
+} __packed;
 
-/* Buffer Descriptor
-*/
-typedef struct buffer_descriptor {
+/* Buffer Descriptor */
+struct buffer_descriptor {
 	u16 status;
 	u16 len;
 	u32 data;
-} __attribute__ ((packed)) qe_bd_t, *p_bd_t;
+} __packed;
 
-#define	SIZEOFBD		sizeof(qe_bd_t)
+#define	SIZEOFBD	sizeof(struct buffer_descriptor)
 
-/* Common BD flags
-*/
+/* Common BD flags */
 #define BD_WRAP			0x2000
 #define BD_INT			0x1000
 #define BD_LAST			0x0800
 #define BD_CLEAN		0x3000
 
-/* TxBD status flags
-*/
-#define TxBD_READY		0x8000
-#define TxBD_PADCRC		0x4000
-#define TxBD_WRAP		BD_WRAP
-#define TxBD_INT		BD_INT
-#define TxBD_LAST		BD_LAST
-#define TxBD_TXCRC		0x0400
-#define TxBD_DEF		0x0200
-#define TxBD_PP			0x0100
-#define TxBD_LC			0x0080
-#define TxBD_RL			0x0040
-#define TxBD_RC			0x003C
-#define TxBD_UNDERRUN		0x0002
-#define TxBD_TRUNC		0x0001
+/* TxBD status flags */
+#define TX_BD_READY		0x8000
+#define TX_BD_PADCRC		0x4000
+#define TX_BD_WRAP		BD_WRAP
+#define TX_BD_INT		BD_INT
+#define TX_BD_LAST		BD_LAST
+#define TX_BD_TXCRC		0x0400
+#define TX_BD_DEF		0x0200
+#define TX_BD_PP			0x0100
+#define TX_BD_LC			0x0080
+#define TX_BD_RL			0x0040
+#define TX_BD_RC			0x003C
+#define TX_BD_UNDERRUN		0x0002
+#define TX_BD_TRUNC		0x0001
 
-#define TxBD_ERROR		(TxBD_UNDERRUN | TxBD_TRUNC)
+#define TX_BD_ERROR		(TX_BD_UNDERRUN | TX_BD_TRUNC)
 
-/* RxBD status flags
-*/
-#define RxBD_EMPTY		0x8000
-#define RxBD_OWNER		0x4000
-#define RxBD_WRAP		BD_WRAP
-#define RxBD_INT		BD_INT
-#define RxBD_LAST		BD_LAST
-#define RxBD_FIRST		0x0400
-#define RxBD_CMR		0x0200
-#define RxBD_MISS		0x0100
-#define RxBD_BCAST		0x0080
-#define RxBD_MCAST		0x0040
-#define RxBD_LG			0x0020
-#define RxBD_NO			0x0010
-#define RxBD_SHORT		0x0008
-#define RxBD_CRCERR		0x0004
-#define RxBD_OVERRUN		0x0002
-#define RxBD_IPCH		0x0001
+/* RxBD status flags */
+#define RX_BD_EMPTY		0x8000
+#define RX_BD_OWNER		0x4000
+#define RX_BD_WRAP		BD_WRAP
+#define RX_BD_INT		BD_INT
+#define RX_BD_LAST		BD_LAST
+#define RX_BD_FIRST		0x0400
+#define RX_BD_CMR		0x0200
+#define RX_BD_MISS		0x0100
+#define RX_BD_BCAST		0x0080
+#define RX_BD_MCAST		0x0040
+#define RX_BD_LG			0x0020
+#define RX_BD_NO			0x0010
+#define RX_BD_SHORT		0x0008
+#define RX_BD_CRCERR		0x0004
+#define RX_BD_OVERRUN		0x0002
+#define RX_BD_IPCH		0x0001
 
-#define RxBD_ERROR		(RxBD_LG | RxBD_NO | RxBD_SHORT | \
-				 RxBD_CRCERR | RxBD_OVERRUN)
+#define RX_BD_ERROR		(RX_BD_LG | RX_BD_NO | RX_BD_SHORT | \
+				 RX_BD_CRCERR | RX_BD_OVERRUN)
 
-/* BD access macros
-*/
-#define BD_STATUS(_bd)			(((p_bd_t)(_bd))->status)
-#define BD_STATUS_SET(_bd, _val)	(((p_bd_t)(_bd))->status = _val)
-#define BD_LENGTH(_bd)			(((p_bd_t)(_bd))->len)
-#define BD_LENGTH_SET(_bd, _val)	(((p_bd_t)(_bd))->len = _val)
-#define BD_DATA_CLEAR(_bd)		(((p_bd_t)(_bd))->data = 0)
-#define BD_IS_DATA(_bd)			(((p_bd_t)(_bd))->data)
-#define BD_DATA(_bd)			((u8 *)(((p_bd_t)(_bd))->data))
-#define BD_DATA_SET(_bd, _data)		(((p_bd_t)(_bd))->data = (u32)(_data))
-#define BD_ADVANCE(_bd,_status,_base)	\
-	(((_status) & BD_WRAP) ? (_bd) = ((p_bd_t)(_base)) : ++(_bd))
+/* BD access macros */
+#define BD_STATUS(_bd)		(in_be16(&((_bd)->status)))
+#define BD_STATUS_SET(_bd, _v)	(out_be16(&((_bd)->status), _v))
+#define BD_LENGTH(_bd)		(in_be16(&((_bd)->len)))
+#define BD_LENGTH_SET(_bd, _v)	(out_be16(&((_bd)->len), _v))
+#define BD_DATA_CLEAR(_bd)	(out_be32(&((_bd)->data), 0))
+#define BD_DATA(_bd)		((u8 *)(((_bd)->data)))
+#define BD_DATA_SET(_bd, _data)	(out_be32(&((_bd)->data), (u32)_data))
+#define BD_ADVANCE(_bd, _status, _base)	\
+	(((_status) & BD_WRAP) ? (_bd) = \
+	 ((struct buffer_descriptor *)(_base)) : ++(_bd))
 
-/* Rx Prefetched BDs
-*/
-typedef struct uec_rx_prefetched_bds {
-    qe_bd_t   bd[MAX_PREFETCHED_BDS]; /* prefetched bd */
-} __attribute__ ((packed)) uec_rx_prefetched_bds_t;
+/* Rx Prefetched BDs */
+struct uec_rx_pref_bds {
+	struct buffer_descriptor   bd[MAX_PREFETCHED_BDS]; /* prefetched bd */
+} __packed;
 
-/* Alignments
- */
+/* Alignments */
 #define UEC_RX_GLOBAL_PRAM_ALIGNMENT				64
 #define UEC_TX_GLOBAL_PRAM_ALIGNMENT				64
 #define UEC_THREAD_RX_PRAM_ALIGNMENT				128
@@ -581,25 +553,8 @@
 #define UEC_RX_BD_RING_SIZE_MIN					8
 #define UEC_TX_BD_RING_SIZE_MIN					2
 
-/* Ethernet speed
-*/
-typedef enum enet_speed {
-	ENET_SPEED_10BT,   /* 10 Base T */
-	ENET_SPEED_100BT,  /* 100 Base T */
-	ENET_SPEED_1000BT  /* 1000 Base T */
-} enet_speed_e;
-
-/* Ethernet Address Type.
-*/
-typedef enum enet_addr_type {
-	ENET_ADDR_TYPE_INDIVIDUAL,
-	ENET_ADDR_TYPE_GROUP,
-	ENET_ADDR_TYPE_BROADCAST
-} enet_addr_type_e;
-
-/* TBI / MII Set Register
-*/
-typedef enum enet_tbi_mii_reg {
+/* TBI / MII Set Register */
+enum enet_tbi_mii_reg {
 	ENET_TBI_MII_CR        = 0x00,
 	ENET_TBI_MII_SR        = 0x01,
 	ENET_TBI_MII_ANA       = 0x04,
@@ -610,7 +565,7 @@
 	ENET_TBI_MII_EXST      = 0x0F,
 	ENET_TBI_MII_JD        = 0x10,
 	ENET_TBI_MII_TBICON    = 0x11
-} enet_tbi_mii_reg_e;
+};
 
 /* TBI MDIO register bit fields*/
 #define TBICON_CLK_SELECT	0x0020
@@ -637,18 +592,16 @@
 		| TBICR_SPEED1_SET \
 		)
 
-/* UEC number of threads
-*/
-typedef enum uec_num_of_threads {
+/* UEC number of threads */
+enum uec_num_of_threads {
 	UEC_NUM_OF_THREADS_1  = 0x1,  /* 1 */
 	UEC_NUM_OF_THREADS_2  = 0x2,  /* 2 */
 	UEC_NUM_OF_THREADS_4  = 0x0,  /* 4 */
 	UEC_NUM_OF_THREADS_6  = 0x3,  /* 6 */
 	UEC_NUM_OF_THREADS_8  = 0x4   /* 8 */
-} uec_num_of_threads_e;
+};
 
-/* UEC initialization info struct
-*/
+/* UEC initialization info struct */
 #define STD_UEC_INFO(num) \
 {			\
 	.uf_info		= {	\
@@ -668,10 +621,10 @@
 	.speed			= CONFIG_SYS_UEC##num##_INTERFACE_SPEED, \
 }
 
-typedef struct uec_info {
-	ucc_fast_info_t			uf_info;
-	uec_num_of_threads_e		num_threads_tx;
-	uec_num_of_threads_e		num_threads_rx;
+struct uec_inf {
+	struct ucc_fast_inf		uf_info;
+	enum uec_num_of_threads		num_threads_tx;
+	enum uec_num_of_threads		num_threads_rx;
 	unsigned int			risc_tx;
 	unsigned int			risc_rx;
 	u16				rx_bd_ring_len;
@@ -679,39 +632,37 @@
 	u8				phy_address;
 	phy_interface_t			enet_interface_type;
 	int				speed;
-} uec_info_t;
+};
 
-/* UEC driver initialized info
-*/
+/* UEC driver initialized info */
 #define MAX_RXBUF_LEN			1536
 #define MAX_FRAME_LEN			1518
 #define MIN_FRAME_LEN			64
 #define MAX_DMA1_LEN			1520
 #define MAX_DMA2_LEN			1520
 
-/* UEC driver private struct
-*/
-typedef struct uec_private {
-	uec_info_t			*uec_info;
-	ucc_fast_private_t		*uccf;
+/* UEC driver private struct */
+struct uec_priv {
+	struct uec_inf			*uec_info;
+	struct ucc_fast_priv		*uccf;
 	struct eth_device		*dev;
 	uec_t				*uec_regs;
 	uec_mii_t			*uec_mii_regs;
 	/* enet init command parameter */
-	uec_init_cmd_pram_t		*p_init_enet_param;
+	struct uec_init_cmd_pram		*p_init_enet_param;
 	u32				init_enet_param_offset;
-	/* Rx and Tx paramter */
-	uec_rx_global_pram_t		*p_rx_glbl_pram;
+	/* Rx and Tx parameter */
+	struct uec_rx_global_pram		*p_rx_glbl_pram;
 	u32				rx_glbl_pram_offset;
-	uec_tx_global_pram_t		*p_tx_glbl_pram;
+	struct uec_tx_global_pram		*p_tx_glbl_pram;
 	u32				tx_glbl_pram_offset;
-	uec_send_queue_mem_region_t	*p_send_q_mem_reg;
+	struct uec_send_queue_mem_region	*p_send_q_mem_reg;
 	u32				send_q_mem_reg_offset;
-	uec_thread_data_tx_t		*p_thread_data_tx;
+	struct uec_thread_data_tx		*p_thread_data_tx;
 	u32				thread_dat_tx_offset;
-	uec_thread_data_rx_t		*p_thread_data_rx;
+	struct uec_thread_data_rx		*p_thread_data_rx;
 	u32				thread_dat_rx_offset;
-	uec_rx_bd_queues_entry_t	*p_rx_bd_qs_tbl;
+	struct uec_rx_bd_queues_entry	*p_rx_bd_qs_tbl;
 	u32				rx_bd_qs_tbl_offset;
 	/* BDs specific */
 	u8				*p_tx_bd_ring;
@@ -720,8 +671,8 @@
 	u32				rx_bd_ring_offset;
 	u8				*p_rx_buf;
 	u32				rx_buf_offset;
-	volatile qe_bd_t		*txBd;
-	volatile qe_bd_t		*rxBd;
+	struct buffer_descriptor	*tx_bd;
+	struct buffer_descriptor	*rx_bd;
 	/* Status */
 	int				mac_tx_enabled;
 	int				mac_rx_enabled;
@@ -733,9 +684,9 @@
 	int				oldspeed;
 	int				oldduplex;
 	int				oldlink;
-} uec_private_t;
+};
 
-int uec_initialize(struct bd_info *bis, uec_info_t *uec_info);
-int uec_eth_init(struct bd_info *bis, uec_info_t *uecs, int num);
+int uec_initialize(struct bd_info *bis, struct uec_inf *uec_info);
+int uec_eth_init(struct bd_info *bis, struct uec_inf *uecs, int num);
 int uec_standard_init(struct bd_info *bis);
 #endif /* __UEC_H__ */
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 69c22dd..b5ca5f7 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -27,13 +27,13 @@
 	printf(format "\n", ## arg)
 
 #define ugphy_dbg(format, arg...)	     \
-	ugphy_printk(format , ## arg)
+	ugphy_printk(format, ## arg)
 #define ugphy_err(format, arg...)	     \
-	ugphy_printk(format , ## arg)
+	ugphy_printk(format, ## arg)
 #define ugphy_info(format, arg...)	     \
-	ugphy_printk(format , ## arg)
+	ugphy_printk(format, ## arg)
 #define ugphy_warn(format, arg...)	     \
-	ugphy_printk(format , ## arg)
+	ugphy_printk(format, ## arg)
 
 #ifdef UEC_VERBOSE_DEBUG
 #define ugphy_vdbg ugphy_dbg
@@ -41,13 +41,13 @@
 #define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
 #endif /* UEC_VERBOSE_DEBUG */
 
-/*--------------------------------------------------------------------+
+/*
+ * --------------------------------------------------------------------
  * Fixed PHY (PHY-less) support for Ethernet Ports.
  *
  * Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c
- *--------------------------------------------------------------------*/
-
-/*
+ *--------------------------------------------------------------------
+ *
  * Some boards do not have a PHY for each ethernet port. These ports are known
  * as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate
  * CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address)
@@ -90,54 +90,58 @@
 	CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
 };
 
-/*--------------------------------------------------------------------+
+/*
+ * -------------------------------------------------------------------
  * BitBang MII support for ethernet ports
  *
  * Based from MPC8560ADS implementation
- *--------------------------------------------------------------------*/
-/*
+ *--------------------------------------------------------------------
+ *
  * Example board header file to define bitbang ethernet ports:
  *
  * #define CONFIG_SYS_BITBANG_PHY_PORT(name) name,
  * #define CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BITBANG_PHY_PORT("UEC0")
-*/
+ */
 #ifndef CONFIG_SYS_BITBANG_PHY_PORTS
 #define CONFIG_SYS_BITBANG_PHY_PORTS	/* default is an empty array */
 #endif
 
 #if defined(CONFIG_BITBANGMII)
-static const char *bitbang_phy_port[] = {
+static const char * const bitbang_phy_port[] = {
 	CONFIG_SYS_BITBANG_PHY_PORTS /* defined in board configuration file */
 };
 #endif /* CONFIG_BITBANGMII */
 
-static void config_genmii_advert (struct uec_mii_info *mii_info);
-static void genmii_setup_forced (struct uec_mii_info *mii_info);
-static void genmii_restart_aneg (struct uec_mii_info *mii_info);
-static int gbit_config_aneg (struct uec_mii_info *mii_info);
-static int genmii_config_aneg (struct uec_mii_info *mii_info);
-static int genmii_update_link (struct uec_mii_info *mii_info);
-static int genmii_read_status (struct uec_mii_info *mii_info);
-u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum);
-void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val);
+static void config_genmii_advert(struct uec_mii_info *mii_info);
+static void genmii_setup_forced(struct uec_mii_info *mii_info);
+static void genmii_restart_aneg(struct uec_mii_info *mii_info);
+static int gbit_config_aneg(struct uec_mii_info *mii_info);
+static int genmii_config_aneg(struct uec_mii_info *mii_info);
+static int genmii_update_link(struct uec_mii_info *mii_info);
+static int genmii_read_status(struct uec_mii_info *mii_info);
+static u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum);
+static void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum,
+			  u16 val);
 
-/* Write value to the PHY for this device to the register at regnum, */
-/* waiting until the write is done before it returns.  All PHY */
-/* configuration has to be done through the TSEC1 MIIM regs */
-void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
+/*
+ * Write value to the PHY for this device to the register at regnum,
+ * waiting until the write is done before it returns.  All PHY
+ * configuration has to be done through the TSEC1 MIIM regs
+ */
+void uec_write_phy_reg(struct eth_device *dev, int mii_id, int regnum,
+		       int value)
 {
-	uec_private_t *ugeth = (uec_private_t *) dev->priv;
+	struct uec_priv *ugeth = (struct uec_priv *)dev->priv;
 	uec_mii_t *ug_regs;
-	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
+	enum enet_tbi_mii_reg mii_reg = (enum enet_tbi_mii_reg)regnum;
 	u32 tmp_reg;
 
-
 #if defined(CONFIG_BITBANGMII)
 	u32 i = 0;
 
 	for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
 		if (strncmp(dev->name, bitbang_phy_port[i],
-			sizeof(dev->name)) == 0) {
+			    sizeof(dev->name)) == 0) {
 			(void)bb_miiphy_write(NULL, mii_id, regnum, value);
 			return;
 		}
@@ -148,46 +152,48 @@
 
 	/* Stop the MII management read cycle */
 	out_be32 (&ug_regs->miimcom, 0);
-	/* Setting up the MII Mangement Address Register */
-	tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
+	/* Setting up the MII Management Address Register */
+	tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
 	out_be32 (&ug_regs->miimadd, tmp_reg);
 
-	/* Setting up the MII Mangement Control Register with the value */
-	out_be32 (&ug_regs->miimcon, (u32) value);
+	/* Setting up the MII Management Control Register with the value */
+	out_be32 (&ug_regs->miimcon, (u32)value);
 	sync();
 
 	/* Wait till MII management write is complete */
-	while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY);
+	while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY)
+		;
 }
 
-/* Reads from register regnum in the PHY for device dev, */
-/* returning the value.  Clears miimcom first.  All PHY */
-/* configuration has to be done through the TSEC1 MIIM regs */
-int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
+/*
+ * Reads from register regnum in the PHY for device dev,
+ * returning the value.  Clears miimcom first.  All PHY
+ * configuration has to be done through the TSEC1 MIIM regs
+ */
+int uec_read_phy_reg(struct eth_device *dev, int mii_id, int regnum)
 {
-	uec_private_t *ugeth = (uec_private_t *) dev->priv;
+	struct uec_priv *ugeth = (struct uec_priv *)dev->priv;
 	uec_mii_t *ug_regs;
-	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
+	enum enet_tbi_mii_reg mii_reg = (enum enet_tbi_mii_reg)regnum;
 	u32 tmp_reg;
 	u16 value;
 
-
 #if defined(CONFIG_BITBANGMII)
 	u32 i = 0;
 
 	for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) {
 		if (strncmp(dev->name, bitbang_phy_port[i],
-			sizeof(dev->name)) == 0) {
+			    sizeof(dev->name)) == 0) {
 			(void)bb_miiphy_read(NULL, mii_id, regnum, &value);
-			return (value);
+			return value;
 		}
 	}
 #endif /* CONFIG_BITBANGMII */
 
 	ug_regs = ugeth->uec_mii_regs;
 
-	/* Setting up the MII Mangement Address Register */
-	tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
+	/* Setting up the MII Management Address Register */
+	tmp_reg = ((u32)mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
 	out_be32 (&ug_regs->miimadd, tmp_reg);
 
 	/* clear MII management command cycle */
@@ -199,37 +205,38 @@
 
 	/* Wait till MII management write is complete */
 	while ((in_be32 (&ug_regs->miimind)) &
-	       (MIIMIND_NOT_VALID | MIIMIND_BUSY));
+	       (MIIMIND_NOT_VALID | MIIMIND_BUSY))
+		;
 
 	/* Read MII management status  */
-	value = (u16) in_be32 (&ug_regs->miimstat);
+	value = (u16)in_be32 (&ug_regs->miimstat);
 	if (value == 0xffff)
 		ugphy_vdbg
 			("read wrong value : mii_id %d,mii_reg %d, base %08x",
-			 mii_id, mii_reg, (u32) & (ug_regs->miimcfg));
+			 mii_id, mii_reg, (u32)&ug_regs->miimcfg);
 
-	return (value);
+	return value;
 }
 
-void mii_clear_phy_interrupt (struct uec_mii_info *mii_info)
+void mii_clear_phy_interrupt(struct uec_mii_info *mii_info)
 {
 	if (mii_info->phyinfo->ack_interrupt)
-		mii_info->phyinfo->ack_interrupt (mii_info);
+		mii_info->phyinfo->ack_interrupt(mii_info);
 }
 
-void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
-				  u32 interrupts)
+void mii_configure_phy_interrupt(struct uec_mii_info *mii_info,
+				 u32 interrupts)
 {
 	mii_info->interrupts = interrupts;
 	if (mii_info->phyinfo->config_intr)
-		mii_info->phyinfo->config_intr (mii_info);
+		mii_info->phyinfo->config_intr(mii_info);
 }
 
 /* Writes MII_ADVERTISE with the appropriate values, after
  * sanitizing advertise to make sure only supported features
  * are advertised
  */
-static void config_genmii_advert (struct uec_mii_info *mii_info)
+static void config_genmii_advert(struct uec_mii_info *mii_info)
 {
 	u32 advertise;
 	u16 adv;
@@ -252,7 +259,7 @@
 	uec_phy_write(mii_info, MII_ADVERTISE, adv);
 }
 
-static void genmii_setup_forced (struct uec_mii_info *mii_info)
+static void genmii_setup_forced(struct uec_mii_info *mii_info)
 {
 	u16 ctrl;
 	u32 features = mii_info->phyinfo->features;
@@ -283,7 +290,7 @@
 				| SUPPORTED_10baseT_Full))
 			break;
 	default:		/* Unsupported speed! */
-		ugphy_err ("%s: Bad speed!", mii_info->dev->name);
+		ugphy_err("%s: Bad speed!", mii_info->dev->name);
 		break;
 	}
 
@@ -291,7 +298,7 @@
 }
 
 /* Enable and Restart Autonegotiation */
-static void genmii_restart_aneg (struct uec_mii_info *mii_info)
+static void genmii_restart_aneg(struct uec_mii_info *mii_info)
 {
 	u16 ctl;
 
@@ -300,14 +307,14 @@
 	uec_phy_write(mii_info, MII_BMCR, ctl);
 }
 
-static int gbit_config_aneg (struct uec_mii_info *mii_info)
+static int gbit_config_aneg(struct uec_mii_info *mii_info)
 {
 	u16 adv;
 	u32 advertise;
 
 	if (mii_info->autoneg) {
 		/* Configure the ADVERTISE register */
-		config_genmii_advert (mii_info);
+		config_genmii_advert(mii_info);
 		advertise = mii_info->advertising;
 
 		adv = uec_phy_read(mii_info, MII_CTRL1000);
@@ -320,18 +327,21 @@
 		uec_phy_write(mii_info, MII_CTRL1000, adv);
 
 		/* Start/Restart aneg */
-		genmii_restart_aneg (mii_info);
-	} else
-		genmii_setup_forced (mii_info);
+		genmii_restart_aneg(mii_info);
+	} else {
+		genmii_setup_forced(mii_info);
+	}
 
 	return 0;
 }
 
-static int marvell_config_aneg (struct uec_mii_info *mii_info)
+static int marvell_config_aneg(struct uec_mii_info *mii_info)
 {
-	/* The Marvell PHY has an errata which requires
+	/*
+	 * The Marvell PHY has an errata which requires
 	 * that certain registers get written in order
-	 * to restart autonegotiation */
+	 * to restart autonegotiation
+	 */
 	uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
 
 	uec_phy_write(mii_info, 0x1d, 0x1f);
@@ -340,16 +350,18 @@
 	uec_phy_write(mii_info, 0x1e, 0);
 	uec_phy_write(mii_info, 0x1e, 0x100);
 
-	gbit_config_aneg (mii_info);
+	gbit_config_aneg(mii_info);
 
 	return 0;
 }
 
-static int genmii_config_aneg (struct uec_mii_info *mii_info)
+static int genmii_config_aneg(struct uec_mii_info *mii_info)
 {
 	if (mii_info->autoneg) {
-		/* Speed up the common case, if link is already up, speed and
-		   duplex match, skip auto neg as it already matches */
+		/*
+		 * Speed up the common case, if link is already up, speed and
+		 * duplex match, skip auto neg as it already matches
+		 */
 		if (!genmii_read_status(mii_info) && mii_info->link)
 			if (mii_info->duplex == DUPLEX_FULL &&
 			    mii_info->speed == SPEED_100)
@@ -357,15 +369,16 @@
 				    ADVERTISED_100baseT_Full)
 					return 0;
 
-		config_genmii_advert (mii_info);
-		genmii_restart_aneg (mii_info);
-	} else
-		genmii_setup_forced (mii_info);
+		config_genmii_advert(mii_info);
+		genmii_restart_aneg(mii_info);
+	} else {
+		genmii_setup_forced(mii_info);
+	}
 
 	return 0;
 }
 
-static int genmii_update_link (struct uec_mii_info *mii_info)
+static int genmii_update_link(struct uec_mii_info *mii_info)
 {
 	u16 status;
 
@@ -377,8 +390,8 @@
 	 * (ie - we're capable and it's not done)
 	 */
 	status = uec_phy_read(mii_info, MII_BMSR);
-	if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
-	    && !(status & BMSR_ANEGCOMPLETE)) {
+	if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE) &&
+	    !(status & BMSR_ANEGCOMPLETE)) {
 		int i = 0;
 
 		while (!(status & BMSR_ANEGCOMPLETE)) {
@@ -405,14 +418,13 @@
 	return 0;
 }
 
-static int genmii_read_status (struct uec_mii_info *mii_info)
+static int genmii_read_status(struct uec_mii_info *mii_info)
 {
 	u16 status;
 	int err;
 
-	/* Update the link, but return if there
-	 * was an error */
-	err = genmii_update_link (mii_info);
+	/* Update the link, but return if there was an error */
+	err = genmii_update_link(mii_info);
 	if (err)
 		return err;
 
@@ -449,13 +461,13 @@
 static int bcm_init(struct uec_mii_info *mii_info)
 {
 	struct eth_device *edev = mii_info->dev;
-	uec_private_t *uec = edev->priv;
+	struct uec_priv *uec = edev->priv;
 
 	gbit_config_aneg(mii_info);
 
-	if ((uec->uec_info->enet_interface_type ==
-				PHY_INTERFACE_MODE_RGMII_RXID) &&
-			(uec->uec_info->speed == SPEED_1000)) {
+	if (uec->uec_info->enet_interface_type ==
+				PHY_INTERFACE_MODE_RGMII_RXID &&
+			uec->uec_info->speed == SPEED_1000) {
 		u16 val;
 		int cnt = 50;
 
@@ -476,18 +488,18 @@
 		uec_phy_write(mii_info, 0x18, val);
 	}
 
-	 return 0;
+	return 0;
 }
 
 static int uec_marvell_init(struct uec_mii_info *mii_info)
 {
 	struct eth_device *edev = mii_info->dev;
-	uec_private_t *uec = edev->priv;
+	struct uec_priv *uec = edev->priv;
 	phy_interface_t iface = uec->uec_info->enet_interface_type;
 	int	speed = uec->uec_info->speed;
 
-	if ((speed == SPEED_1000) &&
-	   (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+	if (speed == SPEED_1000 &&
+	    (iface == PHY_INTERFACE_MODE_RGMII_ID ||
 	    iface == PHY_INTERFACE_MODE_RGMII_RXID ||
 	    iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
 		int temp;
@@ -515,20 +527,21 @@
 	return 0;
 }
 
-static int marvell_read_status (struct uec_mii_info *mii_info)
+static int marvell_read_status(struct uec_mii_info *mii_info)
 {
 	u16 status;
 	int err;
 
-	/* Update the link, but return if there
-	 * was an error */
-	err = genmii_update_link (mii_info);
+	/* Update the link, but return if there was an error */
+	err = genmii_update_link(mii_info);
 	if (err)
 		return err;
 
-	/* If the link is up, read the speed and duplex */
-	/* If we aren't autonegotiating, assume speeds
-	 * are as set */
+	/*
+	 * If the link is up, read the speed and duplex
+	 * If we aren't autonegotiating, assume speeds
+	 * are as set
+	 */
 	if (mii_info->autoneg && mii_info->link) {
 		int speed;
 
@@ -559,7 +572,7 @@
 	return 0;
 }
 
-static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
+static int marvell_ack_interrupt(struct uec_mii_info *mii_info)
 {
 	/* Clear the interrupts by reading the reg */
 	uec_phy_read(mii_info, MII_M1011_IEVENT);
@@ -567,18 +580,18 @@
 	return 0;
 }
 
-static int marvell_config_intr (struct uec_mii_info *mii_info)
+static int marvell_config_intr(struct uec_mii_info *mii_info)
 {
 	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
 		uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
 	else
 		uec_phy_write(mii_info, MII_M1011_IMASK,
-				MII_M1011_IMASK_CLEAR);
+			      MII_M1011_IMASK_CLEAR);
 
 	return 0;
 }
 
-static int dm9161_init (struct uec_mii_info *mii_info)
+static int dm9161_init(struct uec_mii_info *mii_info)
 {
 	/* Reset the PHY */
 	uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) |
@@ -589,29 +602,31 @@
 
 	uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
 
-	config_genmii_advert (mii_info);
+	config_genmii_advert(mii_info);
 	/* Start/restart aneg */
-	genmii_config_aneg (mii_info);
+	genmii_config_aneg(mii_info);
 
 	return 0;
 }
 
-static int dm9161_config_aneg (struct uec_mii_info *mii_info)
+static int dm9161_config_aneg(struct uec_mii_info *mii_info)
 {
 	return 0;
 }
 
-static int dm9161_read_status (struct uec_mii_info *mii_info)
+static int dm9161_read_status(struct uec_mii_info *mii_info)
 {
 	u16 status;
 	int err;
 
 	/* Update the link, but return if there was an error */
-	err = genmii_update_link (mii_info);
+	err = genmii_update_link(mii_info);
 	if (err)
 		return err;
-	/* If the link is up, read the speed and duplex
-	   If we aren't autonegotiating assume speeds are as set */
+	/*
+	 * If the link is up, read the speed and duplex
+	 * If we aren't autonegotiating assume speeds are as set
+	 */
 	if (mii_info->autoneg && mii_info->link) {
 		status = uec_phy_read(mii_info, MII_DM9161_SCSR);
 		if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
@@ -628,7 +643,7 @@
 	return 0;
 }
 
-static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
+static int dm9161_ack_interrupt(struct uec_mii_info *mii_info)
 {
 	/* Clear the interrupt by reading the reg */
 	uec_phy_read(mii_info, MII_DM9161_INTR);
@@ -636,7 +651,7 @@
 	return 0;
 }
 
-static int dm9161_config_intr (struct uec_mii_info *mii_info)
+static int dm9161_config_intr(struct uec_mii_info *mii_info)
 {
 	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
 		uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
@@ -646,23 +661,23 @@
 	return 0;
 }
 
-static void dm9161_close (struct uec_mii_info *mii_info)
+static void dm9161_close(struct uec_mii_info *mii_info)
 {
 }
 
-static int fixed_phy_aneg (struct uec_mii_info *mii_info)
+static int fixed_phy_aneg(struct uec_mii_info *mii_info)
 {
 	mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */
 	return 0;
 }
 
-static int fixed_phy_read_status (struct uec_mii_info *mii_info)
+static int fixed_phy_read_status(struct uec_mii_info *mii_info)
 {
 	int i = 0;
 
 	for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
 		if (strncmp(mii_info->dev->name, fixed_phy_port[i].name,
-				strlen(mii_info->dev->name)) == 0) {
+			    strlen(mii_info->dev->name)) == 0) {
 			mii_info->speed = fixed_phy_port[i].speed;
 			mii_info->duplex = fixed_phy_port[i].duplex;
 			mii_info->link = 1; /* Link is always UP */
@@ -673,25 +688,26 @@
 	return 0;
 }
 
-static int smsc_config_aneg (struct uec_mii_info *mii_info)
+static int smsc_config_aneg(struct uec_mii_info *mii_info)
 {
 	return 0;
 }
 
-static int smsc_read_status (struct uec_mii_info *mii_info)
+static int smsc_read_status(struct uec_mii_info *mii_info)
 {
 	u16 status;
 	int err;
 
-	/* Update the link, but return if there
-	 * was an error */
-	err = genmii_update_link (mii_info);
+	/* Update the link, but return if there was an error */
+	err = genmii_update_link(mii_info);
 	if (err)
 		return err;
 
-	/* If the link is up, read the speed and duplex */
-	/* If we aren't autonegotiating, assume speeds
-	 * are as set */
+	/*
+	 * If the link is up, read the speed and duplex
+	 * If we aren't autonegotiating, assume speeds
+	 * are as set
+	 */
 	if (mii_info->autoneg && mii_info->link) {
 		int	val;
 
@@ -699,22 +715,22 @@
 		val = (status & 0x1c) >> 2;
 
 		switch (val) {
-			case 1:
-				mii_info->duplex = DUPLEX_HALF;
-				mii_info->speed = SPEED_10;
-				break;
-			case 5:
-				mii_info->duplex = DUPLEX_FULL;
-				mii_info->speed = SPEED_10;
-				break;
-			case 2:
-				mii_info->duplex = DUPLEX_HALF;
-				mii_info->speed = SPEED_100;
-				break;
-			case 6:
-				mii_info->duplex = DUPLEX_FULL;
-				mii_info->speed = SPEED_100;
-				break;
+		case 1:
+			mii_info->duplex = DUPLEX_HALF;
+			mii_info->speed = SPEED_10;
+			break;
+		case 5:
+			mii_info->duplex = DUPLEX_FULL;
+			mii_info->speed = SPEED_10;
+			break;
+		case 2:
+			mii_info->duplex = DUPLEX_HALF;
+			mii_info->speed = SPEED_100;
+			break;
+		case 6:
+			mii_info->duplex = DUPLEX_FULL;
+			mii_info->speed = SPEED_100;
+			break;
 		}
 		mii_info->pause = 0;
 	}
@@ -803,25 +819,25 @@
 	NULL
 };
 
-u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum)
+static u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum)
 {
-	return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
+	return mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
 }
 
-void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val)
+static void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val)
 {
-	mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
+	mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
 }
 
 /* Use the PHY ID registers to determine what type of PHY is attached
  * to device dev.  return a struct phy_info structure describing that PHY
  */
-struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
+struct phy_info *uec_get_phy_info(struct uec_mii_info *mii_info)
 {
 	u16 phy_reg;
 	u32 phy_ID;
 	int i;
-	struct phy_info *theInfo = NULL;
+	struct phy_info *info = NULL;
 
 	/* Grab the bits from PHYIR1, and put them in the upper half */
 	phy_reg = uec_phy_read(mii_info, MII_PHYSID1);
@@ -836,30 +852,29 @@
 	for (i = 0; phy_info[i]; i++)
 		if (phy_info[i]->phy_id ==
 		    (phy_ID & phy_info[i]->phy_id_mask)) {
-			theInfo = phy_info[i];
+			info = phy_info[i];
 			break;
 		}
 
 	/* This shouldn't happen, as we have generic PHY support */
-	if (theInfo == NULL) {
-		ugphy_info ("UEC: PHY id %x is not supported!", phy_ID);
+	if (!info) {
+		ugphy_info("UEC: PHY id %x is not supported!", phy_ID);
 		return NULL;
-	} else {
-		ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID);
 	}
+	ugphy_info("UEC: PHY is %s (%x)", info->name, phy_ID);
 
-	return theInfo;
+	return info;
 }
 
 void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
-		int speed)
+				int speed)
 {
-	uec_private_t *uec = (uec_private_t *) dev->priv;
+	struct uec_priv *uec = (struct uec_priv *)dev->priv;
 	struct uec_mii_info *mii_info;
 	u16 status;
 
 	if (!uec->mii_info) {
-		printf ("%s: the PHY not initialized\n", __FUNCTION__);
+		printf("%s: the PHY not initialized\n", __func__);
 		return;
 	}
 	mii_info = uec->mii_info;
@@ -903,10 +918,10 @@
 	/* now the B2 will correctly report autoneg completion status */
 }
 
-void change_phy_interface_mode (struct eth_device *dev,
-				phy_interface_t type, int speed)
+void change_phy_interface_mode(struct eth_device *dev,
+			       phy_interface_t type, int speed)
 {
 #ifdef CONFIG_PHY_MODE_NEED_CHANGE
-	marvell_phy_interface_mode (dev, type, speed);
+	marvell_phy_interface_mode(dev, type, speed);
 #endif
 }
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 83a7ccd..7fd0e2c 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -11,6 +11,8 @@
 #ifndef __UEC_PHY_H__
 #define __UEC_PHY_H__
 
+#include <linux/bitops.h>
+
 #define MII_end ((u32)-2)
 #define MII_read ((u32)-1)
 
@@ -93,8 +95,8 @@
 #define MII_DM9161_INTR_LINK_CHANGE	0x0004
 #define MII_DM9161_INTR_INIT		0x0000
 #define MII_DM9161_INTR_STOP	\
-(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
- | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+		(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK | \
+		 MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
 
 /* DM9161 10BT Configuration/Status */
 #define MII_DM9161_10BTCSR		0x12
@@ -125,35 +127,6 @@
 #define DUPLEX_HALF		0x00
 #define DUPLEX_FULL		0x01
 
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half		(1 << 0)
-#define SUPPORTED_10baseT_Full		(1 << 1)
-#define SUPPORTED_100baseT_Half		(1 << 2)
-#define SUPPORTED_100baseT_Full		(1 << 3)
-#define SUPPORTED_1000baseT_Half	(1 << 4)
-#define SUPPORTED_1000baseT_Full	(1 << 5)
-#define SUPPORTED_Autoneg		(1 << 6)
-#define SUPPORTED_TP			(1 << 7)
-#define SUPPORTED_AUI			(1 << 8)
-#define SUPPORTED_MII			(1 << 9)
-#define SUPPORTED_FIBRE			(1 << 10)
-#define SUPPORTED_BNC			(1 << 11)
-#define SUPPORTED_10000baseT_Full	(1 << 12)
-
-#define ADVERTISED_10baseT_Half		(1 << 0)
-#define ADVERTISED_10baseT_Full		(1 << 1)
-#define ADVERTISED_100baseT_Half	(1 << 2)
-#define ADVERTISED_100baseT_Full	(1 << 3)
-#define ADVERTISED_1000baseT_Half	(1 << 4)
-#define ADVERTISED_1000baseT_Full	(1 << 5)
-#define ADVERTISED_Autoneg		(1 << 6)
-#define ADVERTISED_TP			(1 << 7)
-#define ADVERTISED_AUI			(1 << 8)
-#define ADVERTISED_MII			(1 << 9)
-#define ADVERTISED_FIBRE		(1 << 10)
-#define ADVERTISED_BNC			(1 << 11)
-#define ADVERTISED_10000baseT_Full	(1 << 12)
-
 /* Taken from mii_if_info and sungem_phy.h */
 struct uec_mii_info {
 	/* Information about the PHY type */
@@ -184,9 +157,9 @@
 	void *priv;
 
 	/* Provided by ethernet driver */
-	int (*mdio_read) (struct eth_device * dev, int mii_id, int reg);
-	void (*mdio_write) (struct eth_device * dev, int mii_id, int reg,
-			    int val);
+	int (*mdio_read)(struct eth_device *dev, int mii_id, int reg);
+	void (*mdio_write)(struct eth_device *dev, int mii_id, int reg,
+			   int val);
 };
 
 /* struct phy_info: a structure which defines attributes for a PHY
@@ -208,32 +181,34 @@
 	u32 features;
 
 	/* Called to initialize the PHY */
-	int (*init) (struct uec_mii_info * mii_info);
+	int (*init)(struct uec_mii_info *mii_info);
 
 	/* Called to suspend the PHY for power */
-	int (*suspend) (struct uec_mii_info * mii_info);
+	int (*suspend)(struct uec_mii_info *mii_info);
 
 	/* Reconfigures autonegotiation (or disables it) */
-	int (*config_aneg) (struct uec_mii_info * mii_info);
+	int (*config_aneg)(struct uec_mii_info *mii_info);
 
 	/* Determines the negotiated speed and duplex */
-	int (*read_status) (struct uec_mii_info * mii_info);
+	int (*read_status)(struct uec_mii_info *mii_info);
 
 	/* Clears any pending interrupts */
-	int (*ack_interrupt) (struct uec_mii_info * mii_info);
+	int (*ack_interrupt)(struct uec_mii_info *mii_info);
 
 	/* Enables or disables interrupts */
-	int (*config_intr) (struct uec_mii_info * mii_info);
+	int (*config_intr)(struct uec_mii_info *mii_info);
 
 	/* Clears up any memory if needed */
-	void (*close) (struct uec_mii_info * mii_info);
+	void (*close)(struct uec_mii_info *mii_info);
 };
 
-struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info);
-void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
-		    int value);
-int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
-void mii_clear_phy_interrupt (struct uec_mii_info *mii_info);
-void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
-				  u32 interrupts);
+struct phy_info *uec_get_phy_info(struct uec_mii_info *mii_info);
+void uec_write_phy_reg(struct eth_device *dev, int mii_id, int regnum,
+		       int value);
+int uec_read_phy_reg(struct eth_device *dev, int mii_id, int regnum);
+void mii_clear_phy_interrupt(struct uec_mii_info *mii_info);
+void mii_configure_phy_interrupt(struct uec_mii_info *mii_info,
+				 u32 interrupts);
+void change_phy_interface_mode(struct eth_device *dev,
+			       phy_interface_t type, int speed);
 #endif /* __UEC_PHY_H__ */