imx: ventana: skip nand init for nandless boards
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index b962b4b..f54eab5 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -859,6 +859,7 @@
.vidin_en = IMX_GPIO_NR(5, 20),
.wdis = IMX_GPIO_NR(7, 12),
.otgpwr_en = IMX_GPIO_NR(3, 22),
+ .nand = true,
},
/* GW52xx */
@@ -884,6 +885,7 @@
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
.mmc_cd = IMX_GPIO_NR(7, 0),
+ .nand = true,
},
/* GW53xx */
@@ -908,6 +910,7 @@
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
.mmc_cd = IMX_GPIO_NR(7, 0),
+ .nand = true,
},
/* GW54xx */
@@ -934,6 +937,7 @@
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
.mmc_cd = IMX_GPIO_NR(7, 0),
+ .nand = true,
},
/* GW551x */
@@ -947,6 +951,7 @@
},
.pcie_rst = IMX_GPIO_NR(1, 0),
.wdis = IMX_GPIO_NR(7, 12),
+ .nand = true,
},
/* GW552x */
@@ -964,6 +969,7 @@
.usb_sel = IMX_GPIO_NR(1, 7),
.wdis = IMX_GPIO_NR(7, 12),
.msata_en = GP_MSATA_SEL,
+ .nand = true,
},
/* GW553x */
@@ -982,6 +988,7 @@
.otgpwr_en = IMX_GPIO_NR(3, 22),
.vsel_pin = IMX_GPIO_NR(6, 14),
.mmc_cd = IMX_GPIO_NR(7, 0),
+ .nand = true,
},
/* GW560x */
diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h
index 027e972..5cec01c 100644
--- a/board/gateworks/gw_ventana/common.h
+++ b/board/gateworks/gw_ventana/common.h
@@ -80,6 +80,7 @@
int mmc_cd;
/* various features */
bool usd_vsel;
+ bool nand;
};
extern struct ventana gpio_cfg[GW_UNKNOWN];
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index adccad8..c4a16ff 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -647,21 +647,23 @@
/* address of linux boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ /* read Gateworks EEPROM into global struct (used later) */
+ setup_ventana_i2c(0);
+ board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+
#ifdef CONFIG_CMD_NAND
- setup_gpmi_nand();
+ if (gpio_cfg[board_type].nand)
+ setup_gpmi_nand();
#endif
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
- setup_ventana_i2c(0);
setup_ventana_i2c(1);
setup_ventana_i2c(2);
#ifdef CONFIG_SATA
setup_sata();
#endif
- /* read Gateworks EEPROM into global struct (used later) */
- board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
setup_iomux_gpio(board_type, &ventana_info);