Add support for TB5200 board
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006
Some code cleanup
diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c
index 0597c72..402ac5e 100644
--- a/board/ppmc7xx/ppmc7xx.c
+++ b/board/ppmc7xx/ppmc7xx.c
@@ -1,9 +1,9 @@
/*
* ppmc7xx.c
* ---------
- *
+ *
* Main board-specific routines for Wind River PPMC 7xx/74xx board.
- *
+ *
* By Richard Danter (richard.danter@windriver.com)
* Copyright (C) 2005 Wind River Systems
*/
@@ -24,7 +24,7 @@
/*
* initdram()
- *
+ *
* This function normally initialises the (S)DRAM of the system. For this board
* the SDRAM was already initialised by board_asm_init (see init.S) so we just
* return the size of RAM.
@@ -37,12 +37,12 @@
/*
* after_reloc()
- *
+ *
* This is called after U-Boot has been copied from Flash/ROM to RAM. It gives
* us an opportunity to do some additional setup before the rest of the system
* is initialised. We don't need to do anything, so we just call board_init_r()
* which should never return.
- */
+ */
void after_reloc( ulong dest_addr, gd_t* gd )
{
/* Jump to the main U-Boot board init code */
@@ -52,7 +52,7 @@
/*
* checkboard()
- *
+ *
* We could do some board level checks here, such as working out what version
* it is, but for this board we simply display it's name (on the console).
*/
@@ -65,7 +65,7 @@
/*
* misc_init_r
- *
+ *
* Used for other setup which needs to be done late in the bring-up phase.
*/
int misc_init_r( void )
@@ -78,27 +78,27 @@
/* Enable the I-Cache */
icache_enable();
-
+
return 0;
}
/*
* do_reset()
- *
+ *
* Shell command to reset the board.
*/
void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
{
printf( "Resetting...\n" );
-
+
/* Disabe and invalidate cache */
icache_disable();
dcache_disable();
/* Jump to warm start (in RAM) */
_start_warm();
-
+
/* Should never get here */
while(1);
}