* Firewall and privilege register settings in device tree

Required properties:
--------------------

- compatible: should contain "intel,socfpga-dtreg"
- reg: Physical base address and size of block register.
- intel,offset-settings: 32-bit offset address of block register,
			 followed by 32-bit value settings and
			 the masking bits, only masking bit
			 set to 1 allows modification.

The device tree node which describes secure and privilege register access
configuration in compile time.

Most of these registers are expected to work except for the case which some
registers configuration are required for granting access to some other
registers, for example CCU registers have to be properly configured before
allowing register configuration access to fpga2sdram firewall as shown in
below example.

Some registers depend on runtime data for proper configuration are expected
to be part of driver that generating these data for example configuration for
soc_noc_fw_ddr_mpu_inst_0_ddr_scr block register depend on DDR size parsed from
memory device tree node.

Please refer details of tested examples below for both fpga2sdram and QoS
configuration with default reset value and the comments.

Example:
--------

Configuration for multiple dtreg node support in device tree:

	socfpga_dtreg0: socfpga-dtreg0 {
		compatible = "intel,socfpga-dtreg";
						#address-cells = <1>;
                        #size-cells = <1>;
		        bootph-all;

                        coh_cpu0_bypass_OC_Firewall_main_Firewall@f7100200 {
							reg = <0xf7100200 0x00000014>;
                                intel,offset-settings =
										/*
										 * Disable ocram security at CCU for
										 * non secure access
										 */
                                        <0x0000004 0x8000ffff 0xe007ffff>,
                                        <0x0000008 0x8000ffff 0xe007ffff>,
                                        <0x000000c 0x8000ffff 0xe007ffff>,
                                        <0x0000010 0x8000ffff 0xe007ffff>;
                                bootph-all;
                        };
					};

	socfpga_dtreg1: socfpga-dtreg1 {
		compatible = "intel,socfpga-dtreg";
						#address-cells = <1>;
                        #size-cells = <1>;
						bootph-all;

                        soc_noc_fw_mpfe_csr_inst_0_mpfe_scr@f8020000 {
                                reg = <0xf8020000 0x0000001c>;
                                intel,offset-settings =
                                        /* Disable MPFE firewall for SMMU */
                                        <0x00000000 0x00010101 0x00010101>,
                                        /*
										 * Disable MPFE firewall for HMC
										 * adapter
										 */
                                        <0x00000004 0x00000001 0x00010101>;
								bootph-all;
                        };
					};

To call the nodes use:

	ret = uclass_get_device_by_name(UCLASS_NOP, "socfpga-dtreg0", &dev);
	ret = uclass_get_device_by_name(UCLASS_NOP, "socfpga-dtreg1", &dev);