commit b99647cb3a6a2d7f35b9faf46f0aa4ccd516285a
author Yangbo Lu <yangbo.lu@nxp.com> Wed Dec 07 11:54:30 2016 +0800
committer York Sun <york.sun@nxp.com> Wed Jan 18 09:28:14 2017 -0800
tree 2cd39e28149b4e2a5d0e06e5e4d4d5967883c8e6
parent 3a76dd5011fbf1a861fedd0e7b5c1302301f779e

mmc: fsl_esdhc: make GPIO support optional

There would be compiling error as below when enable driver model for esdhc.
undefined reference to `dm_gpio_get_value'
undefined reference to `gpio_request_by_name_nodev'
This patch is to make GPIO support optional with CONFIG_DM_GPIO. Because
all boards of QorIQ platform don't need it and they just check register for
CD/WP status, only some boards of i.MX platform require this.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: York Sun <york.sun@nxp.com>

drivers/mmc/fsl_esdhc.c

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 9796d39..da3a151 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -104,8 +104,10 @@
 	struct udevice *dev;
 	int non_removable;
 	int wp_enable;
+#ifdef CONFIG_DM_GPIO
 	struct gpio_desc cd_gpio;
 	struct gpio_desc wp_gpio;
+#endif
 };
 
 /* Return the XFERTYP flags for a given command and data packet */
@@ -687,10 +689,11 @@
 #ifdef CONFIG_DM_MMC
 	if (priv->non_removable)
 		return 1;
-
+#ifdef CONFIG_DM_GPIO
 	if (dm_gpio_is_valid(&priv->cd_gpio))
 		return dm_gpio_get_value(&priv->cd_gpio);
 #endif
+#endif
 
 	while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
 		udelay(1000);
@@ -967,17 +970,20 @@
 		priv->non_removable = 1;
 	 } else {
 		priv->non_removable = 0;
+#ifdef CONFIG_DM_GPIO
 		gpio_request_by_name_nodev(fdt, node, "cd-gpios", 0,
 					   &priv->cd_gpio, GPIOD_IS_IN);
+#endif
 	}
 
 	priv->wp_enable = 1;
 
+#ifdef CONFIG_DM_GPIO
 	ret = gpio_request_by_name_nodev(fdt, node, "wp-gpios", 0,
 					 &priv->wp_gpio, GPIOD_IS_IN);
 	if (ret)
 		priv->wp_enable = 0;
-
+#endif
 	/*
 	 * TODO:
 	 * Because lack of clk driver, if SDHC clk is not enabled,