MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
The TQM8548_AG module does not have the standard PCI/PCI-X interface
connected but just the PCI Express interface . So far it was not
possible to disable it without disabling the complete PCI interface
(CONFIG_PCI) including PCI Express.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index c414344..e1e75b8 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -540,9 +540,9 @@
extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
extern void fsl_pci_init(struct pci_controller *hose);
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
-#endif /* CONFIG_PCI || CONFIG_PCI1 */
+#endif /* CONFIG_PCI1 */
#ifdef CONFIG_PCIE1
static struct pci_controller pcie1_hose;
@@ -551,7 +551,7 @@
static inline void init_pci1(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR;
struct pci_controller *hose = &pci1_hose;
@@ -626,9 +626,9 @@
} else {
puts ("PCI1: disabled\n");
}
-#else /* !(CONFIG_PCI || CONFIG_PCI1) */
+#else /* !CONFIG_PCI1 */
gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
-#endif /* CONFIG_PCI || CONFIG_PCI1) */
+#endif /* CONFIG_PCI1 */
}
static inline void init_pcie1(void)
@@ -707,7 +707,7 @@
{
ft_cpu_setup (blob, bd);
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+#ifdef CONFIG_PCI1
ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
#endif
#ifdef CONFIG_PCIE1
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index f5831eb..cca8255 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -42,13 +42,14 @@
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
#define CONFIG_PCI
+#define CONFIG_PCI1 /* PCI/PCI-X controller */
+#ifdef CONFIG_TQM8548
+#define CONFIG_PCIE1 /* PCI Express interface */
+#endif
+
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */
-#ifdef CONFIG_TQM8548
-#define CONFIG_PCI1
-#define CONFIG_PCIE1
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
-#endif
#define CONFIG_TSEC_ENET /* tsec ethernet support */