net: dc2114x: Pass PCI BDF into phys_to_bus()
This is a trick in preparation for adding DM support. By passing in
the PCI BDF into the phys_to_bus() macros and calling that dev, we
can substitute dev with udevice when DM support lands and do minor
adjustment to the macros to support both DM and non-DM operation.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index eb7d29c..75b1017 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -74,9 +74,9 @@
#define POLL_DEMAND 1
#if defined(CONFIG_E500)
-#define phys_to_bus(a) (a)
+#define phys_to_bus(dev, a) (a)
#else
-#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+#define phys_to_bus(dev, a) pci_phys_to_mem((dev), (a))
#endif
#define NUM_RX_DESC PKTBUFSRX
@@ -96,6 +96,7 @@
struct dc2114x_priv {
struct eth_device dev;
+ pci_dev_t devno;
char *name;
void __iomem *iobase;
u8 *enetaddr;
@@ -278,7 +279,6 @@
static void send_setup_frame(struct dc2114x_priv *priv, struct bd_info *bis)
{
- struct eth_device *dev = &priv->dev;
char setup_frame[SETUP_FRAME_LEN];
char *pa = &setup_frame[0];
int i;
@@ -299,7 +299,8 @@
return;
}
- tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32)&setup_frame[0]));
+ tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)&setup_frame[0]));
tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_SET | SETUP_FRAME_LEN);
tx_ring[tx_new].status = cpu_to_le32(T_OWN);
@@ -341,7 +342,8 @@
goto done;
}
- tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32)packet));
+ tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)packet));
tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
tx_ring[tx_new].status = cpu_to_le32(T_OWN);
@@ -411,11 +413,10 @@
{
struct dc2114x_priv *priv =
container_of(dev, struct dc2114x_priv, dev);
- int devbusfn = (int)dev->priv;
int i;
/* Ensure we're not sleeping. */
- pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
+ pci_write_config_byte(priv->devno, PCI_CFDA_PSM, WAKEUP);
reset_de4x5(priv);
@@ -429,8 +430,8 @@
for (i = 0; i < NUM_RX_DESC; i++) {
rx_ring[i].status = cpu_to_le32(R_OWN);
rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
- rx_ring[i].buf =
- cpu_to_le32(phys_to_bus((u32)net_rx_packets[i]));
+ rx_ring[i].buf = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)net_rx_packets[i]));
rx_ring[i].next = 0;
}
@@ -449,8 +450,10 @@
tx_ring[tx_ring_size - 1].des1 |= cpu_to_le32(TD_TER);
/* Tell the adapter where the TX/RX rings are located. */
- dc2114x_outl(priv, phys_to_bus((u32)&rx_ring), DE4X5_RRBA);
- dc2114x_outl(priv, phys_to_bus((u32)&tx_ring), DE4X5_TRBA);
+ dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&rx_ring),
+ DE4X5_RRBA);
+ dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&tx_ring),
+ DE4X5_TRBA);
start_de4x5(priv);
@@ -466,12 +469,11 @@
{
struct dc2114x_priv *priv =
container_of(dev, struct dc2114x_priv, dev);
- int devbusfn = (int)dev->priv;
stop_de4x5(priv);
dc2114x_outl(priv, 0, DE4X5_SICR);
- pci_write_config_byte(devbusfn, PCI_CFDA_PSM, SLEEP);
+ pci_write_config_byte(priv->devno, PCI_CFDA_PSM, SLEEP);
}
static void read_hw_addr(struct dc2114x_priv *priv)
@@ -551,6 +553,7 @@
dev = &priv->dev;
sprintf(dev->name, "dc21x4x#%d", card_number);
+ priv->devno = devbusfn;
priv->name = dev->name;
priv->enetaddr = dev->enetaddr;