/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2011, Marvell Semiconductor Inc.
 * Lei Wen <leiwen@marvell.com>
 *
 * Back ported to the 8xx platform (from the 8260 platform) by
 * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
 */
#ifndef __SDHCI_HW_H
#define __SDHCI_HW_H

#include <linux/bitops.h>
#include <linux/types.h>
#include <asm/io.h>
#include <mmc.h>
#include <asm/gpio.h>

/*
 * Controller registers
 */

#define SDHCI_DMA_ADDRESS	0x00

#define SDHCI_BLOCK_SIZE	0x04
#define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))

#define SDHCI_BLOCK_COUNT	0x06

#define SDHCI_ARGUMENT		0x08

#define SDHCI_TRANSFER_MODE	0x0C
#define  SDHCI_TRNS_DMA		BIT(0)
#define  SDHCI_TRNS_BLK_CNT_EN	BIT(1)
#define  SDHCI_TRNS_ACMD12	BIT(2)
#define  SDHCI_TRNS_READ	BIT(4)
#define  SDHCI_TRNS_MULTI	BIT(5)

#define SDHCI_COMMAND		0x0E
#define  SDHCI_CMD_RESP_MASK	0x03
#define  SDHCI_CMD_CRC		0x08
#define  SDHCI_CMD_INDEX	0x10
#define  SDHCI_CMD_DATA		0x20
#define  SDHCI_CMD_ABORTCMD	0xC0

#define  SDHCI_CMD_RESP_NONE	0x00
#define  SDHCI_CMD_RESP_LONG	0x01
#define  SDHCI_CMD_RESP_SHORT	0x02
#define  SDHCI_CMD_RESP_SHORT_BUSY 0x03

#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)

#define SDHCI_RESPONSE		0x10

#define SDHCI_BUFFER		0x20

#define SDHCI_PRESENT_STATE	0x24
#define  SDHCI_CMD_INHIBIT	BIT(0)
#define  SDHCI_DATA_INHIBIT	BIT(1)
#define  SDHCI_DOING_WRITE	BIT(8)
#define  SDHCI_DOING_READ	BIT(9)
#define  SDHCI_SPACE_AVAILABLE	BIT(10)
#define  SDHCI_DATA_AVAILABLE	BIT(11)
#define  SDHCI_CARD_PRESENT	BIT(16)
#define  SDHCI_CARD_STATE_STABLE	BIT(17)
#define  SDHCI_CARD_DETECT_PIN_LEVEL	BIT(18)
#define  SDHCI_WRITE_PROTECT	BIT(19)

#define SDHCI_HOST_CONTROL	0x28
#define  SDHCI_CTRL_LED		BIT(0)
#define  SDHCI_CTRL_4BITBUS	BIT(1)
#define  SDHCI_CTRL_HISPD	BIT(2)
#define  SDHCI_CTRL_DMA_MASK	0x18
#define   SDHCI_CTRL_SDMA	0x00
#define   SDHCI_CTRL_ADMA1	0x08
#define   SDHCI_CTRL_ADMA32	0x10
#define   SDHCI_CTRL_ADMA64	0x18
#define  SDHCI_CTRL_8BITBUS	BIT(5)
#define  SDHCI_CTRL_CD_TEST_INS	BIT(6)
#define  SDHCI_CTRL_CD_TEST	BIT(7)

#define SDHCI_POWER_CONTROL	0x29
#define  SDHCI_POWER_ON		0x01
#define  SDHCI_POWER_180	0x0A
#define  SDHCI_POWER_300	0x0C
#define  SDHCI_POWER_330	0x0E

#define SDHCI_BLOCK_GAP_CONTROL	0x2A

#define SDHCI_WAKE_UP_CONTROL	0x2B
#define  SDHCI_WAKE_ON_INT	BIT(0)
#define  SDHCI_WAKE_ON_INSERT	BIT(1)
#define  SDHCI_WAKE_ON_REMOVE	BIT(2)

#define SDHCI_CLOCK_CONTROL	0x2C
#define  SDHCI_DIVIDER_SHIFT	8
#define  SDHCI_DIVIDER_HI_SHIFT	6
#define  SDHCI_DIV_MASK	0xFF
#define  SDHCI_DIV_MASK_LEN	8
#define  SDHCI_DIV_HI_MASK	0x300
#define  SDHCI_PROG_CLOCK_MODE  BIT(5)
#define  SDHCI_CLOCK_CARD_EN	BIT(2)
#define  SDHCI_CLOCK_INT_STABLE	BIT(1)
#define  SDHCI_CLOCK_INT_EN	BIT(0)

#define SDHCI_TIMEOUT_CONTROL	0x2E

#define SDHCI_SOFTWARE_RESET	0x2F
#define  SDHCI_RESET_ALL	0x01
#define  SDHCI_RESET_CMD	0x02
#define  SDHCI_RESET_DATA	0x04

#define SDHCI_INT_STATUS	0x30
#define SDHCI_INT_ENABLE	0x34
#define SDHCI_SIGNAL_ENABLE	0x38
#define  SDHCI_INT_RESPONSE	BIT(0)
#define  SDHCI_INT_DATA_END	BIT(1)
#define  SDHCI_INT_DMA_END	BIT(3)
#define  SDHCI_INT_SPACE_AVAIL	BIT(4)
#define  SDHCI_INT_DATA_AVAIL	BIT(5)
#define  SDHCI_INT_CARD_INSERT	BIT(6)
#define  SDHCI_INT_CARD_REMOVE	BIT(7)
#define  SDHCI_INT_CARD_INT	BIT(8)
#define  SDHCI_INT_ERROR	BIT(15)
#define  SDHCI_INT_TIMEOUT	BIT(16)
#define  SDHCI_INT_CRC		BIT(17)
#define  SDHCI_INT_END_BIT	BIT(18)
#define  SDHCI_INT_INDEX	BIT(19)
#define  SDHCI_INT_DATA_TIMEOUT	BIT(20)
#define  SDHCI_INT_DATA_CRC	BIT(21)
#define  SDHCI_INT_DATA_END_BIT	BIT(22)
#define  SDHCI_INT_BUS_POWER	BIT(23)
#define  SDHCI_INT_ACMD12ERR	BIT(24)
#define  SDHCI_INT_ADMA_ERROR	BIT(25)

#define  SDHCI_INT_NORMAL_MASK	0x00007FFF
#define  SDHCI_INT_ERROR_MASK	0xFFFF8000

#define  SDHCI_INT_CMD_MASK	(SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
		SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
#define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
		SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK	((unsigned int)-1)

#define SDHCI_ACMD12_ERR	0x3C

#define SDHCI_HOST_CONTROL2	0x3E
#define  SDHCI_CTRL_UHS_MASK	0x0007
#define  SDHCI_CTRL_UHS_SDR12	0x0000
#define  SDHCI_CTRL_UHS_SDR25	0x0001
#define  SDHCI_CTRL_UHS_SDR50	0x0002
#define  SDHCI_CTRL_UHS_SDR104	0x0003
#define  SDHCI_CTRL_UHS_DDR50	0x0004
#define  SDHCI_CTRL_HS400	0x0005 /* Non-standard */
#define  SDHCI_CTRL_VDD_180	0x0008
#define  SDHCI_CTRL_DRV_TYPE_MASK	0x0030
#define  SDHCI_CTRL_DRV_TYPE_B	0x0000
#define  SDHCI_CTRL_DRV_TYPE_A	0x0010
#define  SDHCI_CTRL_DRV_TYPE_C	0x0020
#define  SDHCI_CTRL_DRV_TYPE_D	0x0030
#define  SDHCI_CTRL_EXEC_TUNING	0x0040
#define  SDHCI_CTRL_TUNED_CLK	0x0080
#define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000

#define SDHCI_CAPABILITIES	0x40
#define  SDHCI_TIMEOUT_CLK_MASK	0x0000003F
#define  SDHCI_TIMEOUT_CLK_SHIFT 0
#define  SDHCI_TIMEOUT_CLK_UNIT	0x00000080
#define  SDHCI_CLOCK_BASE_MASK	0x00003F00
#define  SDHCI_CLOCK_V3_BASE_MASK	0x0000FF00
#define  SDHCI_CLOCK_BASE_SHIFT	8
#define  SDHCI_MAX_BLOCK_MASK	0x00030000
#define  SDHCI_MAX_BLOCK_SHIFT  16
#define  SDHCI_CAN_DO_8BIT	BIT(18)
#define  SDHCI_CAN_DO_ADMA2	BIT(19)
#define  SDHCI_CAN_DO_ADMA1	BIT(20)
#define  SDHCI_CAN_DO_HISPD	BIT(21)
#define  SDHCI_CAN_DO_SDMA	BIT(22)
#define  SDHCI_CAN_VDD_330	BIT(24)
#define  SDHCI_CAN_VDD_300	BIT(25)
#define  SDHCI_CAN_VDD_180	BIT(26)
#define  SDHCI_CAN_64BIT	BIT(28)

#define SDHCI_CAPABILITIES_1	0x44
#define  SDHCI_SUPPORT_SDR50	0x00000001
#define  SDHCI_SUPPORT_SDR104	0x00000002
#define  SDHCI_SUPPORT_DDR50	0x00000004
#define  SDHCI_USE_SDR50_TUNING	0x00002000

#define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
#define  SDHCI_CLOCK_MUL_SHIFT	16

#define SDHCI_MAX_CURRENT	0x48

/* 4C-4F reserved for more max current */

#define SDHCI_SET_ACMD12_ERROR	0x50
#define SDHCI_SET_INT_ERROR	0x52

#define SDHCI_ADMA_ERROR	0x54

/* 55-57 reserved */

#define SDHCI_ADMA_ADDRESS	0x58
#define SDHCI_ADMA_ADDRESS_HI	0x5c

/* 60-FB reserved */

#define SDHCI_SLOT_INT_STATUS	0xFC

#define SDHCI_HOST_VERSION	0xFE
#define  SDHCI_VENDOR_VER_MASK	0xFF00
#define  SDHCI_VENDOR_VER_SHIFT	8
#define  SDHCI_SPEC_VER_MASK	0x00FF
#define  SDHCI_SPEC_VER_SHIFT	0
#define   SDHCI_SPEC_100	0
#define   SDHCI_SPEC_200	1
#define   SDHCI_SPEC_300	2

#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)

/*
 * End of controller registers.
 */

#define SDHCI_MAX_DIV_SPEC_200	256
#define SDHCI_MAX_DIV_SPEC_300	2046

/*
 * quirks
 */
#define SDHCI_QUIRK_32BIT_DMA_ADDR	(1 << 0)
#define SDHCI_QUIRK_REG32_RW		(1 << 1)
#define SDHCI_QUIRK_BROKEN_R1B		(1 << 2)
#define SDHCI_QUIRK_NO_HISPD_BIT	(1 << 3)
#define SDHCI_QUIRK_BROKEN_VOLTAGE	(1 << 4)
/*
 * SDHCI_QUIRK_BROKEN_HISPD_MODE
 * the hardware cannot operate correctly in high-speed mode,
 * this quirk forces the sdhci host-controller to non high-speed mode
 */
#define SDHCI_QUIRK_BROKEN_HISPD_MODE	BIT(5)
#define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)
#define SDHCI_QUIRK_USE_WIDE8		(1 << 8)
#define SDHCI_QUIRK_NO_1_8_V		(1 << 9)

/* to make gcc happy */
struct sdhci_host;

/*
 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
 */
#define SDHCI_DEFAULT_BOUNDARY_SIZE	(512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG	(7)
struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
	u32	(*read_l)(struct sdhci_host *host, int reg);
	u16	(*read_w)(struct sdhci_host *host, int reg);
	u8	(*read_b)(struct sdhci_host *host, int reg);
	void	(*write_l)(struct sdhci_host *host, u32 val, int reg);
	void	(*write_w)(struct sdhci_host *host, u16 val, int reg);
	void	(*write_b)(struct sdhci_host *host, u8 val, int reg);
#endif
	int	(*get_cd)(struct sdhci_host *host);
	void	(*set_control_reg)(struct sdhci_host *host);
	int	(*set_ios_post)(struct sdhci_host *host);
	void	(*set_clock)(struct sdhci_host *host, u32 div);
	int (*platform_execute_tuning)(struct mmc *host, u8 opcode);
	void (*set_delay)(struct sdhci_host *host);
	int	(*deferred_probe)(struct sdhci_host *host);
};

#define ADMA_MAX_LEN	65532
#ifdef CONFIG_DMA_ADDR_T_64BIT
#define ADMA_DESC_LEN	16
#else
#define ADMA_DESC_LEN	8
#endif
#define ADMA_TABLE_NO_ENTRIES (CONFIG_SYS_MMC_MAX_BLK_COUNT * \
			       MMC_MAX_BLOCK_LEN) / ADMA_MAX_LEN

#define ADMA_TABLE_SZ (ADMA_TABLE_NO_ENTRIES * ADMA_DESC_LEN)

/* Decriptor table defines */
#define ADMA_DESC_ATTR_VALID		BIT(0)
#define ADMA_DESC_ATTR_END		BIT(1)
#define ADMA_DESC_ATTR_INT		BIT(2)
#define ADMA_DESC_ATTR_ACT1		BIT(4)
#define ADMA_DESC_ATTR_ACT2		BIT(5)

#define ADMA_DESC_TRANSFER_DATA		ADMA_DESC_ATTR_ACT2
#define ADMA_DESC_LINK_DESC	(ADMA_DESC_ATTR_ACT1 | ADMA_DESC_ATTR_ACT2)

struct sdhci_adma_desc {
	u8 attr;
	u8 reserved;
	u16 len;
	u32 addr_lo;
#ifdef CONFIG_DMA_ADDR_T_64BIT
	u32 addr_hi;
#endif
} __packed;

struct sdhci_host {
	const char *name;
	void *ioaddr;
	unsigned int quirks;
	unsigned int host_caps;
	unsigned int version;
	unsigned int max_clk;   /* Maximum Base Clock frequency */
	unsigned int clk_mul;   /* Clock Multiplier value */
	unsigned int clock;
	struct mmc *mmc;
	const struct sdhci_ops *ops;
	int index;

	int bus_width;
	struct gpio_desc pwr_gpio;	/* Power GPIO */
	struct gpio_desc cd_gpio;		/* Card Detect GPIO */

	uint	voltages;

	struct mmc_config cfg;
	void *align_buffer;
	bool force_align_buffer;
	dma_addr_t start_addr;
	int flags;
#define USE_SDMA	(0x1 << 0)
#define USE_ADMA	(0x1 << 1)
#define USE_ADMA64	(0x1 << 2)
#define USE_DMA		(USE_SDMA | USE_ADMA | USE_ADMA64)
	dma_addr_t adma_addr;
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
	struct sdhci_adma_desc *adma_desc_table;
#endif
};

#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS

static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
	if (unlikely(host->ops->write_l))
		host->ops->write_l(host, val, reg);
	else
		writel(val, host->ioaddr + reg);
}

static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
	if (unlikely(host->ops->write_w))
		host->ops->write_w(host, val, reg);
	else
		writew(val, host->ioaddr + reg);
}

static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
	if (unlikely(host->ops->write_b))
		host->ops->write_b(host, val, reg);
	else
		writeb(val, host->ioaddr + reg);
}

static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
	if (unlikely(host->ops->read_l))
		return host->ops->read_l(host, reg);
	else
		return readl(host->ioaddr + reg);
}

static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
	if (unlikely(host->ops->read_w))
		return host->ops->read_w(host, reg);
	else
		return readw(host->ioaddr + reg);
}

static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
	if (unlikely(host->ops->read_b))
		return host->ops->read_b(host, reg);
	else
		return readb(host->ioaddr + reg);
}

#else

static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
	writel(val, host->ioaddr + reg);
}

static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
	writew(val, host->ioaddr + reg);
}

static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
	writeb(val, host->ioaddr + reg);
}
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
	return readl(host->ioaddr + reg);
}

static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
	return readw(host->ioaddr + reg);
}

static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
	return readb(host->ioaddr + reg);
}
#endif

#ifdef CONFIG_BLK
/**
 * sdhci_setup_cfg() - Set up the configuration for DWMMC
 *
 * This is used to set up an SDHCI device when you are using CONFIG_BLK.
 *
 * This should be called from your MMC driver's probe() method once you have
 * the information required.
 *
 * Generally your driver will have a platform data structure which holds both
 * the configuration (struct mmc_config) and the MMC device info (struct mmc).
 * For example:
 *
 * struct msm_sdhc_plat {
 *	struct mmc_config cfg;
 *	struct mmc mmc;
 * };
 *
 * ...
 *
 * Inside U_BOOT_DRIVER():
 *	.platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat),
 *
 * To access platform data:
 *	struct msm_sdhc_plat *plat = dev_get_platdata(dev);
 *
 * See msm_sdhci.c for an example.
 *
 * @cfg:	Configuration structure to fill in (generally &plat->mmc)
 * @host:	SDHCI host structure
 * @f_max:	Maximum supported clock frequency in HZ (0 for default)
 * @f_min:	Minimum supported clock frequency in HZ (0 for default)
 */
int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
		    u32 f_max, u32 f_min);

/**
 * sdhci_bind() - Set up a new MMC block device
 *
 * This is used to set up an SDHCI block device when you are using CONFIG_BLK.
 * It should be called from your driver's bind() method.
 *
 * See msm_sdhci.c for an example.
 *
 * @dev:	Device to set up
 * @mmc:	Pointer to mmc structure (normally &plat->mmc)
 * @cfg:	Empty configuration structure (generally &plat->cfg). This is
 *		normally all zeroes at this point. The only purpose of passing
 *		this in is to set mmc->cfg to it.
 * @return 0 if OK, -ve if the block device could not be created
 */
int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
#else

/**
 * add_sdhci() - Add a new SDHCI interface
 *
 * This is used when you are not using CONFIG_BLK. Convert your driver over!
 *
 * @host:	SDHCI host structure
 * @f_max:	Maximum supported clock frequency in HZ (0 for default)
 * @f_min:	Minimum supported clock frequency in HZ (0 for default)
 * @return 0 if OK, -ve on error
 */
int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min);
#endif /* !CONFIG_BLK */

void sdhci_set_uhs_timing(struct sdhci_host *host);
#ifdef CONFIG_DM_MMC
/* Export the operations to drivers */
int sdhci_probe(struct udevice *dev);
int sdhci_set_clock(struct mmc *mmc, unsigned int clock);
extern const struct dm_mmc_ops sdhci_ops;
#else
#endif

struct sdhci_adma_desc *sdhci_adma_init(void);
void sdhci_prepare_adma_table(struct sdhci_adma_desc *table,
			      struct mmc_data *data, dma_addr_t addr);

#endif /* __SDHCI_HW_H */