board: ge: bx50v3: Fix message output to video console
Use vidconsole for output to the LCD, now that DM_VIDEO is used. Write
white text on a black background, like before migrating to DM_VIDEO.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 59ec9a0..df2d22b 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -219,13 +219,6 @@
imx_enable_hdmi_phy();
}
-int board_cfb_skip(void)
-{
- gpio_direction_output(LVDS_POWER_GP, 1);
-
- return 0;
-}
-
static int is_b850v3(void)
{
return confidx == 3;
@@ -713,8 +706,14 @@
static int do_backlight_enable(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
+#if CONFIG_IS_ENABLED(DM_VIDEO)
+ int ret;
+ struct udevice *dev;
+
#ifdef CONFIG_VIDEO_IPUV3
if (!is_b850v3()) {
+ gpio_direction_output(LVDS_POWER_GP, 1);
+
/* We need at least 200ms between power on and backlight on
* as per specifications from CHI MEI
*/
@@ -733,6 +732,14 @@
}
#endif
+ /* Probe, to find a video device to be used to show a message on
+ * the vidconsole.
+ */
+ ret = uclass_get_device(UCLASS_VIDEO, 0, &dev);
+ if (ret)
+ return ret;
+#endif
+
return 0;
}
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index f5f471e..7d811f5 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -74,3 +74,4 @@
CONFIG_IMX_WATCHDOG=y
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SYS_WHITE_ON_BLACK=y
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 73cdc5b..9f8d388 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -114,12 +114,11 @@
"swappartitions=" \
"setexpr partnum 3 - ${partnum}\0" \
"failbootcmd=" \
+ "echo reached failbootcmd; " \
"bx50_backlight_enable; " \
- "msg=\"Monitor failed to start. Try again, or contact GE Service for support.\"; " \
- "echo $msg; " \
- "setenv stdout vga; " \
- "echo \"\n\n\n\n \" $msg; " \
- "setenv stdout serial; " \
+ "setcurs 5 4; " \
+ "lcdputs \"Monitor failed to start. " \
+ "Try again, or contact GE Service for support.\"; " \
"mw.b 0x7000A000 0xbc; " \
"mw.b 0x7000A001 0x00; " \
"ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \