spi, spi_mxc: do not hang in spi_xchg_single
if status register do never set MXC_CSPICTRL_TC, spi_xchg_single
endless loops. Add a timeout here to prevent endless hang.
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Dirk Behme <dirk.behme@gmail.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
diff --git a/README b/README
index f704eb3..c52ffd9 100644
--- a/README
+++ b/README
@@ -2597,6 +2597,10 @@
Enables the driver for the SPI controllers on i.MX and MXC
SoCs. Currently i.MX31/35/51 are supported.
+ CONFIG_SYS_SPI_MXC_WAIT
+ Timeout for waiting until spi transfer completed.
+ default: (CONFIG_SYS_HZ/100) /* 10 ms */
+
- FPGA Support: CONFIG_FPGA
Enables FPGA subsystem.
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index f3f029d..2d5f385 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -30,6 +30,10 @@
#define reg_read readl
#define reg_write(a, v) writel(v, a)
+#if !defined(CONFIG_SYS_SPI_MXC_WAIT)
+#define CONFIG_SYS_SPI_MXC_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */
+#endif
+
struct mxc_spi_slave {
struct spi_slave slave;
unsigned long base;
@@ -212,6 +216,8 @@
int nbytes = DIV_ROUND_UP(bitlen, 8);
u32 data, cnt, i;
struct cspi_regs *regs = (struct cspi_regs *)mxcs->base;
+ u32 ts;
+ int status;
debug("%s: bitlen %d dout 0x%x din 0x%x\n",
__func__, bitlen, (u32)dout, (u32)din);
@@ -272,9 +278,16 @@
reg_write(®s->ctrl, mxcs->ctrl_reg |
MXC_CSPICTRL_EN | MXC_CSPICTRL_XCH);
+ ts = get_timer(0);
+ status = reg_read(®s->stat);
/* Wait until the TC (Transfer completed) bit is set */
- while ((reg_read(®s->stat) & MXC_CSPICTRL_TC) == 0)
- ;
+ while ((status & MXC_CSPICTRL_TC) == 0) {
+ if (get_timer(ts) > CONFIG_SYS_SPI_MXC_WAIT) {
+ printf("spi_xchg_single: Timeout!\n");
+ return -1;
+ }
+ status = reg_read(®s->stat);
+ }
/* Transfer completed, clear any pending request */
reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);