treewide: Remove CONFIG_SYS_UBOOT_START from configs board files
As previous CONFIG_SYS_UBOOT_START is now set by default to
CONFIG_SYS_TEXT_BASE when not defined, CONFIG_SYS_UBOOT_START
can be removed from include/configs board files.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index 482e471..f5ee65c 100644
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -64,7 +64,6 @@
#define CONFIG_SPL_NAND_RAW_ONLY
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index cc8f4c0..6543cfd 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -98,7 +98,6 @@
CONFIG_SPL_BSS_MAX_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SYS_MONITOR_LEN 0x100000
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#endif
/* NAND SPL */
diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h
index 045a9f7..0aee1e1 100644
--- a/include/configs/mccmon6.h
+++ b/include/configs/mccmon6.h
@@ -12,7 +12,6 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#include "imx6_spl.h"
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 385b30c..8ca0e83 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -173,8 +173,6 @@
/* Just for sure that there is a space for stack */
#define CONFIG_SPL_STACK_SIZE 0x100
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
CONFIG_SYS_INIT_RAM_ADDR - \
CONFIG_SYS_MALLOC_F_LEN - \
diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h
index e5182ae..faab091 100644
--- a/include/configs/mt7623.h
+++ b/include/configs/mt7623.h
@@ -31,7 +31,6 @@
#define CONFIG_ENV_OVERWRITE
/* Preloader -> Uboot */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \
GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h
index 4aef894..6a6c2f2 100644
--- a/include/configs/mt7629.h
+++ b/include/configs/mt7629.h
@@ -40,7 +40,6 @@
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO)
/* SPL -> Uboot */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \
GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h
index a7fe83a..514722b 100644
--- a/include/configs/mt8518.h
+++ b/include/configs/mt8518.h
@@ -29,7 +29,6 @@
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/* Uboot definition */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + \
SZ_2M - \
GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
index 1b1a56d..c76c81d 100644
--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -26,7 +26,6 @@
* other needs. We use this rather than the inherited defines from
* ti_armv7_common.h for backwards compatibility.
*/
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */
#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
diff --git a/include/configs/pumpkin.h b/include/configs/pumpkin.h
index 35e28be..9c52cae 100644
--- a/include/configs/pumpkin.h
+++ b/include/configs/pumpkin.h
@@ -23,7 +23,6 @@
#define CONFIG_SYS_NS16550_COM1 0x11005000
#define CONFIG_SYS_NS16550_CLK 26000000
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \
GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index b4da1f8..f2cdd9c 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -61,7 +61,6 @@
#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 63092b2..8b6caae 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -27,7 +27,6 @@
#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
CONFIG_SYS_SPL_LEN)
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN 0x60000
diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h
index 38d952d..155d7fe 100644
--- a/include/configs/xilinx_zynqmp_r5.h
+++ b/include/configs/xilinx_zynqmp_r5.h
@@ -35,8 +35,6 @@
/* Extend size of kernel image for uncompression */
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SKIP_LOWLEVEL_INIT
/* 0x0 - 0x40 is used for placing exception vectors */
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 274cc19..189ca81 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -274,6 +274,4 @@
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-
#endif /* __CONFIG_ZYNQ_COMMON_H */