Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMIT
CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was
converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but
there are still places that reference integer values. Change those to hex
as well. Also, update the Makefile to check for 0x0 instead of 0.
This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT
is set by menuconfig to 0x0:
...
spl/u-boot-spl.bin exceeds file size limit:
limit: 0 bytes
actual: 0x80f0 bytes
excess: 0x80f0 bytes
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/Makefile b/Makefile
index 6c3a953..cb28cf6 100644
--- a/Makefile
+++ b/Makefile
@@ -860,13 +860,13 @@
BOARD_SIZE_CHECK =
endif
-ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
else
SPL_SIZE_CHECK =
endif
-ifneq ($(CONFIG_TPL_SIZE_LIMIT),0)
+ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
else
TPL_SIZE_CHECK =
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 620ea1e..af47f5c 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -37,9 +37,9 @@
config SPL_SIZE_LIMIT
hex "Maximum size of SPL image"
depends on SPL
- default 69632 if ARCH_MX6 && !MX6_OCRAM_256KB
- default 200704 if ARCH_MX6 && MX6_OCRAM_256KB
- default 0
+ default 0x11000 if ARCH_MX6 && !MX6_OCRAM_256KB
+ default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB
+ default 0x0
help
Specifies the maximum length of the U-Boot SPL image.
If this value is zero, it is ignored.
@@ -1335,7 +1335,7 @@
config TPL_SIZE_LIMIT
hex "Maximum size of TPL image"
depends on TPL
- default 0
+ default 0x0
help
Specifies the maximum length of the U-Boot TPL image.
If this value is zero, it is ignored.
diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig
index dc290d5..6c04123 100644
--- a/configs/firefly-rk3288_defconfig
+++ b/configs/firefly-rk3288_defconfig
@@ -6,7 +6,7 @@
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_FIREFLY_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
-CONFIG_SPL_SIZE_LIMIT=262144
+CONFIG_SPL_SIZE_LIMIT=0x40000
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly"
diff --git a/configs/imxrt1020-evk_defconfig b/configs/imxrt1020-evk_defconfig
index 61f99e9..9bddb69 100644
--- a/configs/imxrt1020-evk_defconfig
+++ b/configs/imxrt1020-evk_defconfig
@@ -12,7 +12,7 @@
CONFIG_TARGET_IMXRT1020_EVK=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_SIZE_LIMIT=131072
+CONFIG_SPL_SIZE_LIMIT=0x20000
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="imxrt1020-evk"
CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig
index 7261382..f639ea7 100644
--- a/configs/imxrt1050-evk_defconfig
+++ b/configs/imxrt1050-evk_defconfig
@@ -14,7 +14,7 @@
CONFIG_TARGET_IMXRT1050_EVK=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_SIZE_LIMIT=131072
+CONFIG_SPL_SIZE_LIMIT=0x20000
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="imxrt1050-evk"
CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
index 5c3589d..2271483 100644
--- a/configs/tinker-s-rk3288_defconfig
+++ b/configs/tinker-s-rk3288_defconfig
@@ -7,7 +7,7 @@
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_TINKER_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x800000
-CONFIG_SPL_SIZE_LIMIT=307200
+CONFIG_SPL_SIZE_LIMIT=0x4B000
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s"