arm: dts: iot2050: Fix by syncing from Linux
This restores support for IOT2050 by widely synchronizing its DT files
with the Linux kernel. We additionally need to add the alias restoration
that is still waiting for its upstream merge and the not-yet-upstreamed
bits needed for watchdog reboot detection.
Fixes: 4dbdc84754ea ("arm: dts: k3-am654: pull in dtb update from Linux")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
diff --git a/arch/arm/dts/k3-am65-iot2050-common-pg2.dtsi b/arch/arm/dts/k3-am65-iot2050-common-pg2.dtsi
index e73458c..e9419c4 100644
--- a/arch/arm/dts/k3-am65-iot2050-common-pg2.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-common-pg2.dtsi
@@ -10,7 +10,7 @@
*/
&main_pmx0 {
- cp2102n_reset_pin_default: cp2102n-reset-pin-default {
+ cp2102n_reset_pin_default: cp2102n-reset-default-pins {
pinctrl-single,pins = <
/* (AF12) GPIO1_24, used as cp2102 reset */
AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
diff --git a/arch/arm/dts/k3-am65-iot2050-common.dtsi b/arch/arm/dts/k3-am65-iot2050-common.dtsi
index b6135b8..fa71781 100644
--- a/arch/arm/dts/k3-am65-iot2050-common.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-common.dtsi
@@ -14,6 +14,16 @@
/ {
aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ i2c0 = &wkup_i2c0;
+ i2c1 = &mcu_i2c0;
+ i2c2 = &main_i2c0;
+ i2c3 = &main_i2c1;
+ i2c4 = &main_i2c2;
+ i2c5 = &main_i2c3;
spi0 = &mcu_spi0;
mmc0 = &sdhci1;
mmc1 = &sdhci0;
@@ -21,7 +31,6 @@
chosen {
stdout-path = "serial3:115200n8";
- bootargs = "earlycon=ns16550a,mmio32,0x02810000";
};
reserved-memory {
@@ -111,7 +120,7 @@
};
&wkup_pmx0 {
- wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ wkup_i2c0_pins_default: wkup-i2c0-default-pins {
pinctrl-single,pins = <
/* (AC7) WKUP_I2C0_SCL */
AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0)
@@ -120,7 +129,7 @@
>;
};
- mcu_i2c0_pins_default: mcu-i2c0-pins-default {
+ mcu_i2c0_pins_default: mcu-i2c0-default-pins {
pinctrl-single,pins = <
/* (AD8) MCU_I2C0_SCL */
AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0)
@@ -129,21 +138,21 @@
>;
};
- arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-pins-default {
+ arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
pinctrl-single,pins = <
/* (R2) WKUP_GPIO0_21 */
AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
>;
};
- push_button_pins_default: push-button-pins-default {
+ push_button_pins_default: push-button-default-pins {
pinctrl-single,pins = <
/* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7)
>;
};
- arduino_uart_pins_default: arduino-uart-pins-default {
+ arduino_uart_pins_default: arduino-uart-default-pins {
pinctrl-single,pins = <
/* (P4) MCU_UART0_RXD */
AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
@@ -152,7 +161,7 @@
>;
};
- arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-pins-default {
+ arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
pinctrl-single,pins = <
/* (P1) WKUP_GPIO0_31 */
AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
@@ -161,7 +170,7 @@
>;
};
- arduino_io_oe_pins_default: arduino-io-oe-pins-default {
+ arduino_io_oe_pins_default: arduino-io-oe-default-pins {
pinctrl-single,pins = <
/* (N4) WKUP_GPIO0_34 */
AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
@@ -176,7 +185,7 @@
>;
};
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
pinctrl-single,pins = <
/* (V1) MCU_OSPI0_CLK */
AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0)
@@ -191,7 +200,7 @@
>;
};
- db9_com_mode_pins_default: db9-com-mode-pins-default {
+ db9_com_mode_pins_default: db9-com-mode-default-pins {
pinctrl-single,pins = <
/* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */
AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7)
@@ -204,7 +213,7 @@
>;
};
- leds_pins_default: leds-pins-default {
+ leds_pins_default: leds-default-pins {
pinctrl-single,pins = <
/* (T2) WKUP_GPIO0_17, used as user led1 red */
AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7)
@@ -217,7 +226,7 @@
>;
};
- mcu_spi0_pins_default: mcu-spi0-pins-default {
+ mcu_spi0_pins_default: mcu-spi0-default-pins {
pinctrl-single,pins = <
/* (Y1) MCU_SPI0_CLK */
AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
@@ -230,7 +239,7 @@
>;
};
- minipcie_pins_default: minipcie-pins-default {
+ minipcie_pins_default: minipcie-default-pins {
pinctrl-single,pins = <
/* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */
AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7)
@@ -239,7 +248,7 @@
};
&main_pmx0 {
- main_uart1_pins_default: main-uart1-pins-default {
+ main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */
AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */
@@ -248,14 +257,14 @@
>;
};
- main_i2c3_pins_default: main-i2c3-pins-default {
+ main_i2c3_pins_default: main-i2c3-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */
AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */
>;
};
- main_mmc1_pins_default: main-mmc1-pins-default {
+ main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
@@ -268,19 +277,19 @@
>;
};
- usb0_pins_default: usb0-pins-default {
+ usb0_pins_default: usb0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
>;
};
- usb1_pins_default: usb1-pins-default {
+ usb1_pins_default: usb1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
>;
};
- arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-pins-default {
+ arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */
AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */
@@ -291,7 +300,7 @@
>;
};
- dss_vout1_pins_default: dss-vout1-pins-default {
+ dss_vout1_pins_default: dss-vout1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */
AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */
@@ -324,13 +333,13 @@
>;
};
- dp_pins_default: dp-pins-default {
+ dp_pins_default: dp-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */
>;
};
- main_i2c2_pins_default: main-i2c2-pins-default {
+ main_i2c2_pins_default: main-i2c2-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */
AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */
@@ -339,21 +348,21 @@
};
&main_pmx1 {
- main_i2c0_pins_default: main-i2c0-pins-default {
+ main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
>;
};
- main_i2c1_pins_default: main-i2c1-pins-default {
+ main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
>;
};
- ecap0_pins_default: ecap0-pins-default {
+ ecap0_pins_default: ecap0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
>;
@@ -366,15 +375,13 @@
};
&main_uart1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
};
-&main_uart2 {
- status = "disabled";
-};
-
&mcu_uart0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&arduino_uart_pins_default>;
};
@@ -393,13 +400,12 @@
&wkup_gpio0 {
pinctrl-names = "default";
- pinctrl-0 = <
- &arduino_io_d2_to_d3_pins_default
- &arduino_i2c_aio_switch_pins_default
- &arduino_io_oe_pins_default
- &push_button_pins_default
- &db9_com_mode_pins_default
- >;
+ pinctrl-0 =
+ <&arduino_io_d2_to_d3_pins_default>,
+ <&arduino_i2c_aio_switch_pins_default>,
+ <&arduino_io_oe_pins_default>,
+ <&push_button_pins_default>,
+ <&db9_com_mode_pins_default>;
gpio-line-names =
/* 0..9 */
"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
@@ -419,19 +425,21 @@
};
&wkup_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
};
&mcu_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_i2c0_pins_default>;
clock-frequency = <400000>;
psu: regulator@60 {
compatible = "ti,tps62363";
- reg = <0x60>;
+ reg = <0x60>;
regulator-name = "tps62363-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
@@ -484,11 +492,12 @@
};
&main_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
- rtc: rtc8564@51 {
+ rtc: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
@@ -501,18 +510,21 @@
};
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
};
&main_i2c2 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c2_pins_default>;
clock-frequency = <400000>;
};
&main_i2c3 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
@@ -552,6 +564,7 @@
};
&ecap0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins_default>;
};
@@ -576,25 +589,24 @@
};
&mcu_spi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_spi0_pins_default>;
#address-cells = <1>;
- #size-cells= <0>;
+ #size-cells = <0>;
ti,pindir-d0-out-d1-in;
};
-&tscadc0 {
- status = "disabled";
-};
-
&tscadc1 {
+ status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5>;
};
};
&ospi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
@@ -609,8 +621,52 @@
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ seboot@0 {
+ label = "seboot";
+ reg = <0x0 0x180000>; /* 1.5M */
+ };
+
+ tispl@180000 {
+ label = "tispl";
+ reg = <0x180000 0x200000>; /* 2M */
+ };
+
+ u-boot@380000 {
+ label = "u-boot";
+ reg = <0x380000 0x300000>; /* 3M */
+ };
+
+ env@680000 {
+ label = "env";
+ reg = <0x680000 0x20000>; /* 128K */
+ };
+
+ env-backup@6a0000 {
+ label = "env.backup";
+ reg = <0x6a0000 0x20000>; /* 128K */
+ };
+
+ otpcmd@6c0000 {
+ label = "otpcmd";
+ reg = <0x6c0000 0x10000>; /* 64K */
+ };
+
+ unused@6d0000 {
+ label = "unused";
+ reg = <0x6d0000 0x7b0000>; /* 7872K */
+ };
+
+ seboot-backup@e80000 {
+ label = "seboot.backup";
+ reg = <0xe80000 0x180000>; /* 1.5M */
+ };
+ };
};
};
@@ -634,15 +690,8 @@
};
};
-&pcie0_rc {
- status = "disabled";
-};
-
-&pcie0_ep {
- status = "disabled";
-};
-
&pcie1_rc {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&minipcie_pins_default>;
@@ -652,11 +701,8 @@
reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- status = "disabled";
-};
-
&mailbox0_cluster0 {
+ status = "okay";
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -666,6 +712,7 @@
};
&mailbox0_cluster1 {
+ status = "okay";
interrupts = <432>;
mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
@@ -674,71 +721,18 @@
};
};
-&mailbox0_cluster2 {
- status = "disabled";
-};
-
-&mailbox0_cluster3 {
- status = "disabled";
-};
-
-&mailbox0_cluster4 {
- status = "disabled";
-};
-
-&mailbox0_cluster5 {
- status = "disabled";
-};
-
-&mailbox0_cluster6 {
- status = "disabled";
-};
-
-&mailbox0_cluster7 {
- status = "disabled";
-};
-
-&mailbox0_cluster8 {
- status = "disabled";
-};
-
-&mailbox0_cluster9 {
- status = "disabled";
-};
-
-&mailbox0_cluster10 {
- status = "disabled";
-};
-
-&mailbox0_cluster11 {
- status = "disabled";
-};
-
&mcu_r5fss0_core0 {
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
};
&mcu_r5fss0_core1 {
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
};
&mcu_rti1 {
memory-region = <&wdt_reset_memory_region>;
-
-};
-
-&icssg0_mdio {
- status = "disabled";
-};
-
-&icssg1_mdio {
- status = "disabled";
-};
-
-&icssg2_mdio {
- status = "disabled";
};
diff --git a/arch/arm/dts/k3-am6528-iot2050-basic-common.dtsi b/arch/arm/dts/k3-am6528-iot2050-basic-common.dtsi
index 4a9bf7d..5ab434c 100644
--- a/arch/arm/dts/k3-am6528-iot2050-basic-common.dtsi
+++ b/arch/arm/dts/k3-am6528-iot2050-basic-common.dtsi
@@ -35,7 +35,7 @@
};
&main_pmx0 {
- main_uart0_pins_default: main-uart0-pins-default {
+ main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
@@ -50,6 +50,7 @@
};
&main_uart0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
};
diff --git a/arch/arm/dts/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm/dts/k3-am6548-iot2050-advanced-common.dtsi
index d25e8b2..be55494 100644
--- a/arch/arm/dts/k3-am6548-iot2050-advanced-common.dtsi
+++ b/arch/arm/dts/k3-am6548-iot2050-advanced-common.dtsi
@@ -22,7 +22,7 @@
};
&main_pmx0 {
- main_mmc0_pins_default: main-mmc0-pins-default {
+ main_mmc0_pins_default: main-mmc0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
@@ -50,7 +50,3 @@
ti,driver-strength-ohm = <50>;
disable-wp;
};
-
-&main_uart0 {
- status = "disabled";
-};
diff --git a/arch/arm/dts/k3-am6548-iot2050-advanced-m2.dts b/arch/arm/dts/k3-am6548-iot2050-advanced-m2.dts
index 9400e35..774eb14 100644
--- a/arch/arm/dts/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm/dts/k3-am6548-iot2050-advanced-m2.dts
@@ -27,26 +27,26 @@
};
&main_pmx0 {
- main_m2_enable_pins_default: main-m2-enable-pins-default {
+ main_m2_enable_pins_default: main-m2-enable-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */
>;
};
- main_bkey_pcie_reset: main-bkey-pcie-reset {
+ main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */
>;
};
- main_pmx0_m2_config_pins_default: main-pmx0-m2-config-pins-default {
+ main_pmx0_m2_config_pins_default: main-pmx0-m2-config-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7) /* (AE13) GPIO1_18 */
AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */
>;
};
- main_m2_pcie_mux_control: main-m2-pcie-mux-control {
+ main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7) /* (AG22) GPIO0_82 */
AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7) /* (AE20) GPIO0_88 */
@@ -56,7 +56,7 @@
};
&main_pmx1 {
- main_pmx1_m2_config_pins_default: main-pmx1-m2-config-pins-default {
+ main_pmx1_m2_config_pins_default: main-pmx1-m2-config-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7) /* (B22) GPIO1_88 */
AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */
@@ -66,20 +66,18 @@
&main_gpio0 {
pinctrl-names = "default";
- pinctrl-0 = <
- &main_m2_pcie_mux_control
- &arduino_io_d4_to_d9_pins_default
- >;
+ pinctrl-0 =
+ <&main_m2_pcie_mux_control>,
+ <&arduino_io_d4_to_d9_pins_default>;
};
&main_gpio1 {
pinctrl-names = "default";
- pinctrl-0 = <
- &main_m2_enable_pins_default
- &main_pmx0_m2_config_pins_default
- &main_pmx1_m2_config_pins_default
- &cp2102n_reset_pin_default
- >;
+ pinctrl-0 =
+ <&main_m2_enable_pins_default>,
+ <&main_pmx0_m2_config_pins_default>,
+ <&main_pmx1_m2_config_pins_default>,
+ <&cp2102n_reset_pin_default>;
};
/*