diff --git a/cmd/pmic.c b/cmd/pmic.c
index e46d813..2400bfb 100644
--- a/cmd/pmic.c
+++ b/cmd/pmic.c
@@ -95,7 +95,7 @@
 
 	for (reg = 0; reg < pmic_reg_count(dev); reg++) {
 		ret = pmic_reg_read(dev, reg);
-		if (ret < 0) {
+		if (ret < 0 && ret != -ENODATA) {
 			printf("Can't read register: %d\n", reg);
 			return failure(ret);
 		}
@@ -103,7 +103,15 @@
 		if (!(reg % 16))
 			printf("\n0x%02x: ", reg);
 
-		printf(fmt, ret);
+		if (ret == -ENODATA) {
+			int i;
+
+			for (i = 0; i < priv->trans_len; i++)
+				puts("--");
+			puts(" ");
+		} else {
+			printf(fmt, ret);
+		}
 	}
 	printf("\n");
 
diff --git a/cmd/sata.c b/cmd/sata.c
index a73cc54..6bdb516 100644
--- a/cmd/sata.c
+++ b/cmd/sata.c
@@ -26,6 +26,8 @@
 	struct udevice *dev;
 	int rc;
 
+	blk_unbind_all(IF_TYPE_SATA);
+
 	rc = uclass_find_device(UCLASS_AHCI, devnum, &dev);
 	if (!rc && !dev)
 		rc = uclass_find_first_device(UCLASS_AHCI, &dev);
diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index d32e784..61d4c74 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -46,6 +46,8 @@
 CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-tbs2910"
+CONFIG_OF_DTB_PROPS_REMOVE=y
+CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index df9372c..ef8bf49 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -40,6 +40,20 @@
 	functions. It uses an I2C interface and is designed for use with
 	tablets and smartphones.
 
+config DM_PMIC_DA9063
+	bool "Enable Driver Model for the Dialog DA9063 PMIC"
+	depends on DM_PMIC
+	help
+	  This config enables implementation of driver-model pmic uclass features
+	  for PMIC DA9063. The driver implements read/write operations.
+
+config SPL_DM_PMIC_DA9063
+	bool "Enable Driver Model for the Dialog DA9063 PMIC in SPL"
+	depends on DM_PMIC && SPL
+	help
+	  This config enables implementation of driver-model pmic uclass features
+	  for PMIC DA9063. The driver implements read/write operations.
+
 config PMIC_AS3722
 	bool "Enable support for the Austria Micro Systems (AMS) AS7322 PMIC"
 	help
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 7b6cb0e..9cd6c37 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -5,6 +5,7 @@
 
 obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
 obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o
 obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
 obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
 obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
diff --git a/drivers/power/pmic/da9063.c b/drivers/power/pmic/da9063.c
new file mode 100644
index 0000000..abda7a5
--- /dev/null
+++ b/drivers/power/pmic/da9063.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2018 Flowbird
+ *  Martin Fuzzey  <martin.fuzzey@flowbird.group>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <errno.h>
+#include <dm.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+#include <power/da9063_pmic.h>
+
+static const struct pmic_child_info pmic_children_info[] = {
+	{ .prefix = "ldo", .driver = DA9063_LDO_DRIVER },
+	{ .prefix = "b", .driver = DA9063_BUCK_DRIVER },
+	{ },
+};
+
+/*
+ * The register map is non contiguous and attempts to read in the holes fail.
+ * But "pmic dump" tries to dump the full register map.
+ * So define the holes here so we can fix that.
+ */
+struct da9063_reg_hole {
+	u16	first;
+	u16	last;
+};
+
+static const struct da9063_reg_hole da9063_reg_holes[] = {
+	DA9063_REG_HOLE_1,
+	DA9063_REG_HOLE_2,
+	DA9063_REG_HOLE_3,
+	/* These aren't readable. I can't see why from the datasheet but
+	 * attempts to read fail and the kernel marks them unreadable too,
+	 */
+	{DA9063_REG_OTP_COUNT, DA9063_REG_OTP_DATA},
+};
+
+static int da9063_reg_count(struct udevice *dev)
+{
+	return DA9063_NUM_OF_REGS;
+}
+
+static bool da9063_reg_valid(uint reg)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(da9063_reg_holes); i++) {
+		const struct da9063_reg_hole *hole = &da9063_reg_holes[i];
+
+		if (reg >= hole->first && reg <= hole->last)
+			return false;
+	}
+
+	return true;
+}
+
+static int da9063_write(struct udevice *dev, uint reg, const uint8_t *buff,
+			int len)
+{
+	if (dm_i2c_write(dev, reg, buff, len)) {
+		pr_err("write error to device: %p register: %#x!", dev, reg);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int da9063_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+{
+	if (!da9063_reg_valid(reg))
+		return -ENODATA;
+
+	if (dm_i2c_read(dev, reg, buff, len)) {
+		pr_err("read error from device: %p register: %#x!", dev, reg);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int da9063_bind(struct udevice *dev)
+{
+	ofnode regulators_node;
+	int children;
+
+	regulators_node = dev_read_subnode(dev, "regulators");
+	if (!ofnode_valid(regulators_node)) {
+		debug("%s: %s regulators subnode not found!", __func__,
+		      dev->name);
+		return -ENXIO;
+	}
+
+	debug("%s: '%s' - found regulators subnode\n", __func__, dev->name);
+
+	children = pmic_bind_children(dev, regulators_node, pmic_children_info);
+	if (!children)
+		debug("%s: %s - no child found\n", __func__, dev->name);
+
+	/* Always return success for this device */
+	return 0;
+}
+
+static int da9063_probe(struct udevice *dev)
+{
+	return i2c_set_chip_addr_offset_mask(dev, 0x1);
+}
+
+static struct dm_pmic_ops da9063_ops = {
+	.reg_count = da9063_reg_count,
+	.read = da9063_read,
+	.write = da9063_write,
+};
+
+static const struct udevice_id da9063_ids[] = {
+	{ .compatible = "dlg,da9063" },
+	{ }
+};
+
+U_BOOT_DRIVER(pmic_da9063) = {
+	.name = "da9063_pmic",
+	.id = UCLASS_PMIC,
+	.of_match = da9063_ids,
+	.bind = da9063_bind,
+	.probe = da9063_probe,
+	.ops = &da9063_ops,
+};
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 25fc787..d431102 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -60,6 +60,26 @@
 	This config enables implementation of driver-model regulator uclass
 	features for regulators on ROHM BD71837 and BD71847 in SPL.
 
+config DM_REGULATOR_DA9063
+	bool "Enable Driver Model for REGULATOR DA9063"
+	depends on DM_REGULATOR && DM_PMIC_DA9063
+	help
+	  This config enables implementation of driver-model regulator uclass
+	  features for REGULATOR DA9063.
+	  The driver implements get/set api for value, enable and mode for all
+	  regulators. It also implements the get/set api for current for the
+	  buck regulators.
+
+config SPL_DM_REGULATOR_DA9063
+	bool "Enable Driver Model for REGULATOR DA9063 in SPL"
+	depends on DM_REGULATOR && DM_PMIC_DA9063  && SPL
+	help
+	  This config enables implementation of driver-model regulator uclass
+	  features for REGULATOR DA9063.
+	  The driver implements get/set api for value, enable and mode for all
+	  regulators. It also implements the get/set api for current for the
+	  buck regulators.
+
 config DM_REGULATOR_PFUZE100
 	bool "Enable Driver Model for REGULATOR PFUZE100"
 	depends on DM_REGULATOR && DM_PMIC_PFUZE100
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index b611c90..9d58112 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -7,6 +7,7 @@
 obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
 obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
 obj-$(CONFIG_REGULATOR_AS3722)	+= as3722_regulator.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o
 obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
 obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
diff --git a/drivers/power/regulator/da9063.c b/drivers/power/regulator/da9063.c
new file mode 100644
index 0000000..8990be1
--- /dev/null
+++ b/drivers/power/regulator/da9063.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2018 Flowbird
+ *  Martin Fuzzey  <martin.fuzzey@flowbird.group>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <power/da9063_pmic.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+
+#define	DA9063_BUCK_EN		0x01
+#define	DA9063_LDO_EN		0x01
+#define DA9063_VBUCK_MASK	0x7F
+#define DA9063_BUCK_SL		0x80
+#define DA9063_LDO_SL		0x80
+
+#define DA9063_VLDO1_MASK	0x3F
+#define DA9063_VLDO2_MASK	0x3F
+#define DA9063_VLDO3_MASK	0x7F
+#define DA9063_VLDO4_MASK	0x7F
+#define DA9063_VLDO5_MASK	0x3F
+#define DA9063_VLDO6_MASK	0x3F
+#define DA9063_VLDO7_MASK	0x3F
+#define DA9063_VLDO8_MASK	0x3F
+#define DA9063_VLDO9_MASK	0x3F
+#define DA9063_VLDO10_MASK	0x3F
+#define DA9063_VLDO11_MASK	0x3F
+
+#define DA9063_BUCK_MODE_MASK	0xC0
+#define	DA9063_BUCK_MODE_MANUAL	0x00
+#define	DA9063_BUCK_MODE_SLEEP	0x40
+#define	DA9063_BUCK_MODE_SYNC	0x80
+#define	DA9063_BUCK_MODE_AUTO	0xC0
+
+#define DA9063_BIO_ILIM_MASK	0x0F
+#define DA9063_BMEM_ILIM_MASK	0xF0
+#define DA9063_BPRO_ILIM_MASK	0x0F
+#define DA9063_BPERI_ILIM_MASK	0xF0
+#define DA9063_BCORE1_ILIM_MASK	0x0F
+#define DA9063_BCORE2_ILIM_MASK	0xF0
+
+struct da9063_reg_info {
+	uint min_uV;
+	uint step_uV;
+	uint max_uV;
+	uint min_uA;
+	uint step_uA;
+	uint max_uA;
+	uint en_reg;
+	uint vsel_reg;
+	uint mode_reg;
+	uint ilim_reg;
+	u8 en_mask;
+	u8 vsel_mask;
+	u8 ilim_mask;
+	const char *dt_node_name;
+	const int *current_limits;
+};
+
+struct da9063_priv {
+	const struct da9063_reg_info *reg_info;
+};
+
+static struct dm_regulator_mode da9063_ldo_modes[] = {
+	{ .id = DA9063_LDOMODE_SLEEP,
+		.register_value = DA9063_LDO_SL, .name = "SLEEP" },
+	{ .id = DA9063_LDOMODE_NORMAL,
+		.register_value = 0, .name = "NORMAL" },
+};
+
+#define DA9063_LDO(regl_name, min_mV, step_mV, max_mV) \
+	.min_uV = (min_mV) * 1000, \
+	.step_uV = (step_mV) * 1000, \
+	.max_uV = (max_mV) * 1000, \
+	.en_reg = DA9063_REG_##regl_name##_CONT, \
+	.en_mask = DA9063_LDO_EN, \
+	.vsel_reg = DA9063_REG_V##regl_name##_A, \
+	.vsel_mask = DA9063_V##regl_name##_MASK, \
+	.mode_reg = DA9063_REG_V##regl_name##_A \
+
+/* This array is directly indexed so must stay in numerical order */
+static const struct da9063_reg_info da9063_ldo_info[] = {
+	{ DA9063_LDO(LDO1, 600, 20, 1860) },
+	{ DA9063_LDO(LDO2, 600, 20, 1860) },
+	{ DA9063_LDO(LDO3, 900, 20, 3440) },
+	{ DA9063_LDO(LDO4, 900, 20, 3440) },
+	{ DA9063_LDO(LDO5, 900, 50, 3600) },
+	{ DA9063_LDO(LDO6, 900, 50, 3600) },
+	{ DA9063_LDO(LDO7, 900, 50, 3600) },
+	{ DA9063_LDO(LDO8, 900, 50, 3600) },
+	{ DA9063_LDO(LDO9, 950, 50, 3600) },
+	{ DA9063_LDO(LDO10, 900, 50, 3600) },
+	{ DA9063_LDO(LDO11, 900, 50, 3600) },
+};
+
+static struct dm_regulator_mode da9063_buck_modes[] = {
+	{ .id = DA9063_BUCKMODE_SLEEP,
+		.register_value = DA9063_BUCK_MODE_SLEEP, .name = "SLEEP" },
+	{ .id = DA9063_BUCKMODE_SYNC,
+		.register_value = DA9063_BUCK_MODE_SYNC, .name = "SYNC" },
+	{ .id = DA9063_BUCKMODE_AUTO,
+		.register_value = DA9063_BUCK_MODE_AUTO, .name = "AUTO" },
+};
+
+#define DA9063_BUCK(regl_name, dt_name, \
+		    min_mV, step_mV, max_mV, \
+		    min_mA, step_mA, max_mA, _ilim_reg) \
+	.dt_node_name = dt_name, \
+	.min_uV = (min_mV) * 1000, \
+	.step_uV = (step_mV) * 1000, \
+	.max_uV = (max_mV) * 1000, \
+	.min_uA = (min_mA) * 1000, \
+	.step_uA = (step_mA) * 1000, \
+	.max_uA = (max_mA) * 1000, \
+	.en_reg = DA9063_REG_##regl_name##_CONT, \
+	.en_mask = DA9063_BUCK_EN, \
+	.vsel_reg = DA9063_REG_V##regl_name##_A, \
+	.vsel_mask = DA9063_VBUCK_MASK, \
+	.mode_reg = DA9063_REG_##regl_name##_CFG, \
+	.ilim_reg = DA9063_REG_BUCK_ILIM_##_ilim_reg, \
+	.ilim_mask = DA9063_##regl_name##_ILIM_MASK
+
+static const struct da9063_reg_info da9063_buck_info[] = {
+	/*				mV		mA */
+	{ DA9063_BUCK(BCORE1, "bcore1",	300, 10, 1570,	500, 100, 2000,	C) },
+	{ DA9063_BUCK(BCORE2, "bcore2", 300, 10, 1570,	500, 100, 2000, C) },
+	{ DA9063_BUCK(BPRO, "bpro",	530, 10, 1800,	500, 100, 2000, B) },
+	{ DA9063_BUCK(BMEM, "bmem",	800, 20, 3340,	1500, 100, 3000, A) },
+	{ DA9063_BUCK(BIO, "bio",	800, 20, 3340,	1500, 100, 3000, A) },
+	{ DA9063_BUCK(BPERI, "bperi",	800, 20, 3340,	1500, 100, 3000, B) },
+};
+
+static int da9063_get_enable(struct udevice *dev)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	int ret;
+
+	ret = pmic_reg_read(dev->parent, info->en_reg);
+	if (ret < 0)
+		return ret;
+
+	return ret & info->en_mask ? true : false;
+}
+
+static int da9063_set_enable(struct udevice *dev, bool enable)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+
+	return pmic_clrsetbits(dev->parent, info->en_reg,
+			       info->en_mask, enable ? info->en_mask : 0);
+}
+
+static int da9063_get_voltage(struct udevice *dev)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	int ret;
+
+	ret = pmic_reg_read(dev->parent, info->vsel_reg);
+	if (ret < 0)
+		return ret;
+
+	return info->min_uV + (ret & info->vsel_mask) * info->step_uV;
+}
+
+static int da9063_set_voltage(struct udevice *dev, int uV)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	uint sel;
+
+	if (uV < info->min_uV || uV > info->max_uV)
+		return -EINVAL;
+
+	sel = (uV - info->min_uV) / info->step_uV;
+
+	return pmic_clrsetbits(dev->parent, info->vsel_reg,
+			       info->vsel_mask, sel);
+}
+
+static const struct dm_regulator_mode
+	*da9063_find_mode_by_id(int id,
+				const struct dm_regulator_mode *modes,
+				uint mode_count)
+{
+	for (; mode_count; mode_count--) {
+		if (modes->id == id)
+			return modes;
+		modes++;
+	}
+	return NULL;
+}
+
+static int ldo_get_mode(struct udevice *dev)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	int val;
+
+	val = pmic_reg_read(dev->parent, info->mode_reg);
+	if (val < 0)
+		return val;
+
+	if (val & DA9063_LDO_SL)
+		return DA9063_LDOMODE_SLEEP;
+	else
+		return DA9063_LDOMODE_NORMAL;
+}
+
+static int ldo_set_mode(struct udevice *dev, int mode_id)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	const struct dm_regulator_mode *mode;
+
+	mode = da9063_find_mode_by_id(mode_id,
+				      da9063_ldo_modes,
+				      ARRAY_SIZE(da9063_ldo_modes));
+	if (!mode)
+		return -EINVAL;
+
+	return pmic_clrsetbits(dev->parent, info->mode_reg,
+			       DA9063_LDO_SL, mode->register_value);
+}
+
+static int buck_get_mode(struct udevice *dev)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	int i;
+	int val;
+
+	val = pmic_reg_read(dev->parent, info->mode_reg);
+	if (val < 0)
+		return val;
+
+	val &= DA9063_BUCK_MODE_MASK;
+	if (val == DA9063_BUCK_MODE_MANUAL) {
+		val = pmic_reg_read(dev->parent, info->vsel_reg);
+		if (val < 0)
+			return val;
+
+		if (val & DA9063_BUCK_SL)
+			return DA9063_BUCKMODE_SLEEP;
+		else
+			return DA9063_BUCKMODE_SYNC;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(da9063_buck_modes); i++) {
+		if (da9063_buck_modes[i].register_value == val)
+			return da9063_buck_modes[i].id;
+	}
+
+	return -EINVAL;
+}
+
+static int buck_set_mode(struct udevice *dev, int mode_id)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	const struct dm_regulator_mode *mode;
+
+	mode = da9063_find_mode_by_id(mode_id,
+				      da9063_buck_modes,
+				      ARRAY_SIZE(da9063_buck_modes));
+	if (!mode)
+		return -EINVAL;
+
+	return pmic_clrsetbits(dev->parent, info->mode_reg,
+			       DA9063_BUCK_MODE_MASK, mode->register_value);
+}
+
+static int buck_get_current_limit(struct udevice *dev)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	int val;
+
+	val = pmic_reg_read(dev->parent, info->ilim_reg);
+	if (val < 0)
+		return val;
+
+	val &= info->ilim_mask;
+	val >>= (ffs(info->ilim_mask) - 1);
+
+	return info->min_uA + val * info->step_uA;
+}
+
+static int buck_set_current_limit(struct udevice *dev, int uA)
+{
+	const struct da9063_priv *priv = dev->priv;
+	const struct da9063_reg_info *info = priv->reg_info;
+	int val;
+
+	if (uA < info->min_uA || uA > info->max_uA)
+		return -EINVAL;
+
+	val = (uA - info->min_uA) / info->step_uA;
+	val <<= (ffs(info->ilim_mask) - 1);
+
+	return pmic_clrsetbits(dev->parent, info->ilim_reg,
+			       info->ilim_mask, val);
+}
+
+static int da9063_ldo_probe(struct udevice *dev)
+{
+	struct dm_regulator_uclass_platdata *uc_pdata;
+	struct da9063_priv *priv = dev->priv;
+
+	/* LDOs are named numerically in DT so can directly index */
+	if (dev->driver_data < 1 ||
+	    dev->driver_data > ARRAY_SIZE(da9063_ldo_info))
+		return -EINVAL;
+	priv->reg_info = &da9063_ldo_info[dev->driver_data - 1];
+
+	uc_pdata = dev_get_uclass_platdata(dev);
+	uc_pdata->type = REGULATOR_TYPE_LDO;
+	uc_pdata->mode = da9063_ldo_modes;
+	uc_pdata->mode_count = ARRAY_SIZE(da9063_ldo_modes);
+
+	return 0;
+}
+
+static int da9063_buck_probe(struct udevice *dev)
+{
+	struct dm_regulator_uclass_platdata *uc_pdata;
+	struct da9063_priv *priv = dev->priv;
+	int i;
+
+	/* Bucks have names rather than numbers so need to match with DT */
+	for (i = 0; i < ARRAY_SIZE(da9063_buck_info); i++) {
+		const struct da9063_reg_info *info = &da9063_buck_info[i];
+
+		if (!strcmp(info->dt_node_name, dev->name)) {
+			priv->reg_info = info;
+			break;
+		}
+	}
+	if (!priv->reg_info)
+		return -ENODEV;
+
+	uc_pdata = dev_get_uclass_platdata(dev);
+	uc_pdata->type = REGULATOR_TYPE_BUCK;
+	uc_pdata->mode = da9063_buck_modes;
+	uc_pdata->mode_count = ARRAY_SIZE(da9063_buck_modes);
+
+	return 0;
+}
+
+static const struct dm_regulator_ops da9063_ldo_ops = {
+	.get_value  = da9063_get_voltage,
+	.set_value  = da9063_set_voltage,
+	.get_enable = da9063_get_enable,
+	.set_enable = da9063_set_enable,
+	.get_mode   = ldo_get_mode,
+	.set_mode   = ldo_set_mode,
+};
+
+U_BOOT_DRIVER(da9063_ldo) = {
+	.name = DA9063_LDO_DRIVER,
+	.id = UCLASS_REGULATOR,
+	.ops = &da9063_ldo_ops,
+	.probe = da9063_ldo_probe,
+	.priv_auto_alloc_size = sizeof(struct da9063_priv),
+};
+
+static const struct dm_regulator_ops da9063_buck_ops = {
+	.get_value  = da9063_get_voltage,
+	.set_value  = da9063_set_voltage,
+	.get_enable = da9063_get_enable,
+	.set_enable = da9063_set_enable,
+	.get_mode   = buck_get_mode,
+	.set_mode   = buck_set_mode,
+	.get_current = buck_get_current_limit,
+	.set_current = buck_set_current_limit,
+};
+
+U_BOOT_DRIVER(da9063_buck) = {
+	.name = DA9063_BUCK_DRIVER,
+	.id = UCLASS_REGULATOR,
+	.ops = &da9063_buck_ops,
+	.probe = da9063_buck_probe,
+	.priv_auto_alloc_size = sizeof(struct da9063_priv),
+};
diff --git a/drivers/rtc/s35392a.c b/drivers/rtc/s35392a.c
index 4f478cc..3bfe481 100644
--- a/drivers/rtc/s35392a.c
+++ b/drivers/rtc/s35392a.c
@@ -24,11 +24,13 @@
 #include <linux/bitrev.h>
 #include <rtc.h>
 
-#define S35390A_CMD_STATUS1		0x30
-#define S35390A_CMD_STATUS2		0x31
-#define S35390A_CMD_TIME1		0x32
-#define S35390A_CMD_TIME2		0x33
-#define S35390A_CMD_INT2_REG1	0x35
+#define S35390A_CHIP_ADDR	0x30
+
+#define S35390A_CMD_STATUS1	0x0
+#define S35390A_CMD_STATUS2	0x1
+#define S35390A_CMD_TIME1	0x2
+#define S35390A_CMD_TIME2	0x3
+#define S35390A_CMD_INT2_REG1	0x5
 
 #define S35390A_BYTE_YEAR	0
 #define S35390A_BYTE_MONTH	1
@@ -85,11 +87,10 @@
 	int ret;
 
 #ifdef CONFIG_DM_RTC
-	/* TODO: we need to tweak the chip address to reg */
-	ret = dm_i2c_read(dev, 0, buf, len);
+	ret = dm_i2c_read(dev, reg, buf, len);
 #else
 	(void)dev;
-	ret = i2c_read(reg, 0, -1, buf, len);
+	ret = i2c_read(S35390A_CHIP_ADDR | reg, 0, -1, buf, len);
 #endif
 
 	return ret;
@@ -100,11 +101,10 @@
 	int ret;
 
 #ifdef CONFIG_DM_RTC
-	/* TODO: we need to tweak the chip address to reg */
-	ret = dm_i2c_write(dev, 0, buf, 1);
+	ret = dm_i2c_write(dev, reg, buf, len);
 #else
 	(void)dev;
-	ret = i2c_write(reg, 0, 0, buf, len);
+	ret = i2c_write(S35390A_CHIP_ADDR | reg, 0, 0, buf, len);
 #endif
 
 	return ret;
@@ -336,6 +336,13 @@
 
 static int s35392a_probe(struct udevice *dev)
 {
+#if defined(CONFIG_DM_RTC)
+	/* 3-bit "command", or register, is encoded within the device address.
+	 */
+	i2c_set_chip_offset_len(dev, 0);
+	i2c_set_chip_addr_offset_mask(dev, 0x7);
+#endif
+
 	s35392a_rtc_init(dev);
 	return 0;
 }
diff --git a/dts/Kconfig b/dts/Kconfig
index d3313dd..046a54a 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -314,6 +314,26 @@
 	  can be discarded. This option defines the list of properties to
 	  discard.
 
+config OF_DTB_PROPS_REMOVE
+	bool "Enable removal of device tree properties"
+	depends on OF_CONTROL
+	help
+	  Some boards have restricted amount of storage for U-Boot image.
+	  If the generated binary doesn't fit into available image storage,
+	  the built-in device tree could probably be cut down by removing
+	  some not required device tree properties to reduce the image size.
+	  Enable this option and define the properties to be removed in the
+	  CONFIG_OF_REMOVE_PROPS list. Do not enable this option if you must
+	  pass the built-in DTB directly to the kernel!
+
+config OF_REMOVE_PROPS
+	string "List of device tree properties to drop"
+	depends on OF_DTB_PROPS_REMOVE
+	default "interrupt-parent interrupts" if PINCTRL
+	help
+	  Some properties are not used by U-Boot and can be discarded.
+	  This option defines the list of properties to discard.
+
 config SPL_OF_PLATDATA
 	bool "Generate platform data for use in SPL"
 	depends on SPL_OF_CONTROL
diff --git a/dts/Makefile b/dts/Makefile
index 1f83e61..a20930e 100644
--- a/dts/Makefile
+++ b/dts/Makefile
@@ -19,8 +19,13 @@
 $(obj)/dt-spl.dtb: $(DTB) $(objtree)/tools/fdtgrep FORCE
 	$(call if_changed,fdtgrep)
 
+ifeq ($(CONFIG_OF_DTB_PROPS_REMOVE),y)
+$(obj)/dt.dtb: $(DTB) $(objtree)/tools/fdtgrep FORCE
+	$(call if_changed,fdt_rm_props)
+else
 $(obj)/dt.dtb: $(DTB) FORCE
 	$(call if_changed,shipped)
+endif
 
 targets += dt.dtb dt-spl.dtb
 
diff --git a/include/power/da9063_pmic.h b/include/power/da9063_pmic.h
new file mode 100644
index 0000000..273a07e
--- /dev/null
+++ b/include/power/da9063_pmic.h
@@ -0,0 +1,320 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 2018 Flowbird
+ *  Martin Fuzzey  <martin.fuzzey@flowbird.group>
+ */
+
+#ifndef __DA9063_PMIC_H_
+#define __DA9063_PMIC_H_
+
+/* Register definitions below taken from the kernel */
+
+/* Page selection I2C or SPI always in the beginning of any page. */
+/* Page 0 : I2C access 0x000 - 0x0FF	SPI access 0x000 - 0x07F */
+/* Page 1 :				SPI access 0x080 - 0x0FF */
+/* Page 2 : I2C access 0x100 - 0x1FF	SPI access 0x100 - 0x17F */
+/* Page 3 :				SPI access 0x180 - 0x1FF */
+#define	DA9063_REG_PAGE_CON		0x00
+
+/* System Control and Event Registers */
+#define	DA9063_REG_STATUS_A		0x01
+#define	DA9063_REG_STATUS_B		0x02
+#define	DA9063_REG_STATUS_C		0x03
+#define	DA9063_REG_STATUS_D		0x04
+#define	DA9063_REG_FAULT_LOG		0x05
+#define	DA9063_REG_EVENT_A		0x06
+#define	DA9063_REG_EVENT_B		0x07
+#define	DA9063_REG_EVENT_C		0x08
+#define	DA9063_REG_EVENT_D		0x09
+#define	DA9063_REG_IRQ_MASK_A		0x0A
+#define	DA9063_REG_IRQ_MASK_B		0x0B
+#define	DA9063_REG_IRQ_MASK_C		0x0C
+#define	DA9063_REG_IRQ_MASK_D		0x0D
+#define	DA9063_REG_CONTROL_A		0x0E
+#define	DA9063_REG_CONTROL_B		0x0F
+#define	DA9063_REG_CONTROL_C		0x10
+#define	DA9063_REG_CONTROL_D		0x11
+#define	DA9063_REG_CONTROL_E		0x12
+#define	DA9063_REG_CONTROL_F		0x13
+#define	DA9063_REG_PD_DIS		0x14
+
+/* GPIO Control Registers */
+#define	DA9063_REG_GPIO_0_1		0x15
+#define	DA9063_REG_GPIO_2_3		0x16
+#define	DA9063_REG_GPIO_4_5		0x17
+#define	DA9063_REG_GPIO_6_7		0x18
+#define	DA9063_REG_GPIO_8_9		0x19
+#define	DA9063_REG_GPIO_10_11		0x1A
+#define	DA9063_REG_GPIO_12_13		0x1B
+#define	DA9063_REG_GPIO_14_15		0x1C
+#define	DA9063_REG_GPIO_MODE0_7		0x1D
+#define	DA9063_REG_GPIO_MODE8_15	0x1E
+#define	DA9063_REG_SWITCH_CONT		0x1F
+
+/* Regulator Control Registers */
+#define	DA9063_REG_BCORE2_CONT		0x20
+#define	DA9063_REG_BCORE1_CONT		0x21
+#define	DA9063_REG_BPRO_CONT		0x22
+#define	DA9063_REG_BMEM_CONT		0x23
+#define	DA9063_REG_BIO_CONT		0x24
+#define	DA9063_REG_BPERI_CONT		0x25
+#define	DA9063_REG_LDO1_CONT		0x26
+#define	DA9063_REG_LDO2_CONT		0x27
+#define	DA9063_REG_LDO3_CONT		0x28
+#define	DA9063_REG_LDO4_CONT		0x29
+#define	DA9063_REG_LDO5_CONT		0x2A
+#define	DA9063_REG_LDO6_CONT		0x2B
+#define	DA9063_REG_LDO7_CONT		0x2C
+#define	DA9063_REG_LDO8_CONT		0x2D
+#define	DA9063_REG_LDO9_CONT		0x2E
+#define	DA9063_REG_LDO10_CONT		0x2F
+#define	DA9063_REG_LDO11_CONT		0x30
+#define	DA9063_REG_SUPPLIES		0x31
+#define	DA9063_REG_DVC_1		0x32
+#define	DA9063_REG_DVC_2		0x33
+
+/* GP-ADC Control Registers */
+#define	DA9063_REG_ADC_MAN		0x34
+#define	DA9063_REG_ADC_CONT		0x35
+#define	DA9063_REG_VSYS_MON		0x36
+#define	DA9063_REG_ADC_RES_L		0x37
+#define	DA9063_REG_ADC_RES_H		0x38
+#define	DA9063_REG_VSYS_RES		0x39
+#define	DA9063_REG_ADCIN1_RES		0x3A
+#define	DA9063_REG_ADCIN2_RES		0x3B
+#define	DA9063_REG_ADCIN3_RES		0x3C
+#define	DA9063_REG_MON_A8_RES		0x3D
+#define	DA9063_REG_MON_A9_RES		0x3E
+#define	DA9063_REG_MON_A10_RES		0x3F
+
+/* RTC Calendar and Alarm Registers */
+#define	DA9063_REG_COUNT_S		0x40
+#define	DA9063_REG_COUNT_MI		0x41
+#define	DA9063_REG_COUNT_H		0x42
+#define	DA9063_REG_COUNT_D		0x43
+#define	DA9063_REG_COUNT_MO		0x44
+#define	DA9063_REG_COUNT_Y		0x45
+
+#define	DA9063_AD_REG_ALARM_MI		0x46
+#define	DA9063_AD_REG_ALARM_H		0x47
+#define	DA9063_AD_REG_ALARM_D		0x48
+#define	DA9063_AD_REG_ALARM_MO		0x49
+#define	DA9063_AD_REG_ALARM_Y		0x4A
+#define	DA9063_AD_REG_SECOND_A		0x4B
+#define	DA9063_AD_REG_SECOND_B		0x4C
+#define	DA9063_AD_REG_SECOND_C		0x4D
+#define	DA9063_AD_REG_SECOND_D		0x4E
+
+#define	DA9063_BB_REG_ALARM_S		0x46
+#define	DA9063_BB_REG_ALARM_MI		0x47
+#define	DA9063_BB_REG_ALARM_H		0x48
+#define	DA9063_BB_REG_ALARM_D		0x49
+#define	DA9063_BB_REG_ALARM_MO		0x4A
+#define	DA9063_BB_REG_ALARM_Y		0x4B
+#define	DA9063_BB_REG_SECOND_A		0x4C
+#define	DA9063_BB_REG_SECOND_B		0x4D
+#define	DA9063_BB_REG_SECOND_C		0x4E
+#define	DA9063_BB_REG_SECOND_D		0x4F
+
+#define DA9063_REG_HOLE_1 {0x50, 0x7F}
+
+/* Sequencer Control Registers */
+#define	DA9063_REG_SEQ			0x81
+#define	DA9063_REG_SEQ_TIMER		0x82
+#define	DA9063_REG_ID_2_1		0x83
+#define	DA9063_REG_ID_4_3		0x84
+#define	DA9063_REG_ID_6_5		0x85
+#define	DA9063_REG_ID_8_7		0x86
+#define	DA9063_REG_ID_10_9		0x87
+#define	DA9063_REG_ID_12_11		0x88
+#define	DA9063_REG_ID_14_13		0x89
+#define	DA9063_REG_ID_16_15		0x8A
+#define	DA9063_REG_ID_18_17		0x8B
+#define	DA9063_REG_ID_20_19		0x8C
+#define	DA9063_REG_ID_22_21		0x8D
+#define	DA9063_REG_ID_24_23		0x8E
+#define	DA9063_REG_ID_26_25		0x8F
+#define	DA9063_REG_ID_28_27		0x90
+#define	DA9063_REG_ID_30_29		0x91
+#define	DA9063_REG_ID_32_31		0x92
+#define	DA9063_REG_SEQ_A		0x95
+#define	DA9063_REG_SEQ_B		0x96
+#define	DA9063_REG_WAIT			0x97
+#define	DA9063_REG_EN_32K		0x98
+#define	DA9063_REG_RESET		0x99
+
+/* Regulator Setting Registers */
+#define	DA9063_REG_BUCK_ILIM_A		0x9A
+#define	DA9063_REG_BUCK_ILIM_B		0x9B
+#define	DA9063_REG_BUCK_ILIM_C		0x9C
+#define	DA9063_REG_BCORE2_CFG		0x9D
+#define	DA9063_REG_BCORE1_CFG		0x9E
+#define	DA9063_REG_BPRO_CFG		0x9F
+#define	DA9063_REG_BIO_CFG		0xA0
+#define	DA9063_REG_BMEM_CFG		0xA1
+#define	DA9063_REG_BPERI_CFG		0xA2
+#define	DA9063_REG_VBCORE2_A		0xA3
+#define	DA9063_REG_VBCORE1_A		0xA4
+#define	DA9063_REG_VBPRO_A		0xA5
+#define	DA9063_REG_VBMEM_A		0xA6
+#define	DA9063_REG_VBIO_A		0xA7
+#define	DA9063_REG_VBPERI_A		0xA8
+#define	DA9063_REG_VLDO1_A		0xA9
+#define	DA9063_REG_VLDO2_A		0xAA
+#define	DA9063_REG_VLDO3_A		0xAB
+#define	DA9063_REG_VLDO4_A		0xAC
+#define	DA9063_REG_VLDO5_A		0xAD
+#define	DA9063_REG_VLDO6_A		0xAE
+#define	DA9063_REG_VLDO7_A		0xAF
+#define	DA9063_REG_VLDO8_A		0xB0
+#define	DA9063_REG_VLDO9_A		0xB1
+#define	DA9063_REG_VLDO10_A		0xB2
+#define	DA9063_REG_VLDO11_A		0xB3
+#define	DA9063_REG_VBCORE2_B		0xB4
+#define	DA9063_REG_VBCORE1_B		0xB5
+#define	DA9063_REG_VBPRO_B		0xB6
+#define	DA9063_REG_VBMEM_B		0xB7
+#define	DA9063_REG_VBIO_B		0xB8
+#define	DA9063_REG_VBPERI_B		0xB9
+#define	DA9063_REG_VLDO1_B		0xBA
+#define	DA9063_REG_VLDO2_B		0xBB
+#define	DA9063_REG_VLDO3_B		0xBC
+#define	DA9063_REG_VLDO4_B		0xBD
+#define	DA9063_REG_VLDO5_B		0xBE
+#define	DA9063_REG_VLDO6_B		0xBF
+#define	DA9063_REG_VLDO7_B		0xC0
+#define	DA9063_REG_VLDO8_B		0xC1
+#define	DA9063_REG_VLDO9_B		0xC2
+#define	DA9063_REG_VLDO10_B		0xC3
+#define	DA9063_REG_VLDO11_B		0xC4
+
+/* Backup Battery Charger Control Register */
+#define	DA9063_REG_BBAT_CONT		0xC5
+
+/* GPIO PWM (LED) */
+#define	DA9063_REG_GPO11_LED		0xC6
+#define	DA9063_REG_GPO14_LED		0xC7
+#define	DA9063_REG_GPO15_LED		0xC8
+
+/* GP-ADC Threshold Registers */
+#define	DA9063_REG_ADC_CFG		0xC9
+#define	DA9063_REG_AUTO1_HIGH		0xCA
+#define	DA9063_REG_AUTO1_LOW		0xCB
+#define	DA9063_REG_AUTO2_HIGH		0xCC
+#define	DA9063_REG_AUTO2_LOW		0xCD
+#define	DA9063_REG_AUTO3_HIGH		0xCE
+#define	DA9063_REG_AUTO3_LOW		0xCF
+
+#define DA9063_REG_HOLE_2 {0xD0, 0xFF}
+
+/* DA9063 Configuration registers */
+/* OTP */
+#define	DA9063_REG_OTP_COUNT		0x101
+#define	DA9063_REG_OTP_ADDR		0x102
+#define	DA9063_REG_OTP_DATA		0x103
+
+/* Customer Trim and Configuration */
+#define	DA9063_REG_T_OFFSET		0x104
+#define	DA9063_REG_INTERFACE		0x105
+#define	DA9063_REG_CONFIG_A		0x106
+#define	DA9063_REG_CONFIG_B		0x107
+#define	DA9063_REG_CONFIG_C		0x108
+#define	DA9063_REG_CONFIG_D		0x109
+#define	DA9063_REG_CONFIG_E		0x10A
+#define	DA9063_REG_CONFIG_F		0x10B
+#define	DA9063_REG_CONFIG_G		0x10C
+#define	DA9063_REG_CONFIG_H		0x10D
+#define	DA9063_REG_CONFIG_I		0x10E
+#define	DA9063_REG_CONFIG_J		0x10F
+#define	DA9063_REG_CONFIG_K		0x110
+#define	DA9063_REG_CONFIG_L		0x111
+
+#define	DA9063_AD_REG_MON_REG_1		0x112
+#define	DA9063_AD_REG_MON_REG_2		0x113
+#define	DA9063_AD_REG_MON_REG_3		0x114
+#define	DA9063_AD_REG_MON_REG_4		0x115
+#define	DA9063_AD_REG_MON_REG_5		0x116
+#define	DA9063_AD_REG_MON_REG_6		0x117
+#define	DA9063_AD_REG_TRIM_CLDR		0x118
+
+#define	DA9063_AD_REG_GP_ID_0		0x119
+#define	DA9063_AD_REG_GP_ID_1		0x11A
+#define	DA9063_AD_REG_GP_ID_2		0x11B
+#define	DA9063_AD_REG_GP_ID_3		0x11C
+#define	DA9063_AD_REG_GP_ID_4		0x11D
+#define	DA9063_AD_REG_GP_ID_5		0x11E
+#define	DA9063_AD_REG_GP_ID_6		0x11F
+#define	DA9063_AD_REG_GP_ID_7		0x120
+#define	DA9063_AD_REG_GP_ID_8		0x121
+#define	DA9063_AD_REG_GP_ID_9		0x122
+#define	DA9063_AD_REG_GP_ID_10		0x123
+#define	DA9063_AD_REG_GP_ID_11		0x124
+#define	DA9063_AD_REG_GP_ID_12		0x125
+#define	DA9063_AD_REG_GP_ID_13		0x126
+#define	DA9063_AD_REG_GP_ID_14		0x127
+#define	DA9063_AD_REG_GP_ID_15		0x128
+#define	DA9063_AD_REG_GP_ID_16		0x129
+#define	DA9063_AD_REG_GP_ID_17		0x12A
+#define	DA9063_AD_REG_GP_ID_18		0x12B
+#define	DA9063_AD_REG_GP_ID_19		0x12C
+
+#define	DA9063_BB_REG_CONFIG_M		0x112
+#define	DA9063_BB_REG_CONFIG_N		0x113
+
+#define	DA9063_BB_REG_MON_REG_1		0x114
+#define	DA9063_BB_REG_MON_REG_2		0x115
+#define	DA9063_BB_REG_MON_REG_3		0x116
+#define	DA9063_BB_REG_MON_REG_4		0x117
+#define	DA9063_BB_REG_MON_REG_5		0x11E
+#define	DA9063_BB_REG_MON_REG_6		0x11F
+#define	DA9063_BB_REG_TRIM_CLDR		0x120
+/* General Purpose Registers */
+#define	DA9063_BB_REG_GP_ID_0		0x121
+#define	DA9063_BB_REG_GP_ID_1		0x122
+#define	DA9063_BB_REG_GP_ID_2		0x123
+#define	DA9063_BB_REG_GP_ID_3		0x124
+#define	DA9063_BB_REG_GP_ID_4		0x125
+#define	DA9063_BB_REG_GP_ID_5		0x126
+#define	DA9063_BB_REG_GP_ID_6		0x127
+#define	DA9063_BB_REG_GP_ID_7		0x128
+#define	DA9063_BB_REG_GP_ID_8		0x129
+#define	DA9063_BB_REG_GP_ID_9		0x12A
+#define	DA9063_BB_REG_GP_ID_10		0x12B
+#define	DA9063_BB_REG_GP_ID_11		0x12C
+#define	DA9063_BB_REG_GP_ID_12		0x12D
+#define	DA9063_BB_REG_GP_ID_13		0x12E
+#define	DA9063_BB_REG_GP_ID_14		0x12F
+#define	DA9063_BB_REG_GP_ID_15		0x130
+#define	DA9063_BB_REG_GP_ID_16		0x131
+#define	DA9063_BB_REG_GP_ID_17		0x132
+#define	DA9063_BB_REG_GP_ID_18		0x133
+#define	DA9063_BB_REG_GP_ID_19		0x134
+
+/* 0x135 - 0x13f are readable, but not documented */
+#define DA9063_REG_HOLE_3 {0x140, 0x17F}
+
+/* Chip ID and variant */
+#define	DA9063_REG_CHIP_ID		0x181
+#define	DA9063_REG_CHIP_VARIANT		0x182
+#define DA9063_REG_CUSTOMER_ID		0x183
+#define DA9063_REG_CONFIG_ID		0x184
+
+#define DA9063_NUM_OF_REGS		(DA9063_REG_CONFIG_ID + 1)
+
+/* Drivers name */
+#define DA9063_LDO_DRIVER	"da9063_ldo"
+#define DA9063_BUCK_DRIVER	"da9063_buck"
+
+/* Regulator modes */
+enum {
+	DA9063_LDOMODE_SLEEP,
+	DA9063_LDOMODE_NORMAL
+};
+
+enum {
+	DA9063_BUCKMODE_SLEEP,
+	DA9063_BUCKMODE_SYNC,
+	DA9063_BUCKMODE_AUTO,
+};
+
+#endif
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 4ea898a..30f392f 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -544,3 +544,11 @@
 	$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
 		-P u-boot,dm-pre-reloc -P u-boot,dm-spl -P u-boot,dm-tpl \
 		$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
+
+# fdt_rm_props
+# ---------------------------------------------------------------------------
+# Pass the original device tree file through fdtgrep. This removes various
+# unused properties. The output is typically a smaller device tree file.
+quiet_cmd_fdt_rm_props = FDTGREP $@
+	cmd_fdt_rm_props = cat $< | $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
+			$(addprefix -P ,$(subst $\",,$(CONFIG_OF_REMOVE_PROPS)))