cosmetic: replace MIN, MAX with min, max

The macro MIN, MAX is defined as the aliase of min, max,
respectively.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c
index 3708b6f..47c23bb 100644
--- a/arch/arm/cpu/arm1176/tnetv107x/clock.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c
@@ -362,7 +362,7 @@
 	pllctl_reg_write(data->pll, ctl, tmp);
 
 	mult = data->pll_freq / fpll;
-	for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) {
+	for (mult = max(mult, 1); mult <= MAX_MULT; mult++) {
 		div = (fpll * mult) / data->pll_freq;
 		if (div < 1 || div > MAX_DIV)
 			continue;
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 7b5c1e4..7a9b03a 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -247,47 +247,47 @@
 
 	switch (ddr3_cfg->mem_speed) {
 	case 800:
-		txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1;
-		tcke = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1;
+		txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
 		if (ddr3_cfg->pagesz == 1) {
 			tfaw = DIV_ROUND_UP(40000, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
 		} else {
 			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
 		}
 		break;
 	case 1066:
-		txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1;
-		tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1;
+		txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1;
 		if (ddr3_cfg->pagesz == 1) {
 			tfaw = DIV_ROUND_UP(37500, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1;
 		} else {
 			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
 		}
 		break;
 	case 1333:
-		txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1;
-		tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1;
+		txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1;
+		tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1;
 		if (ddr3_cfg->pagesz == 1) {
 			tfaw = DIV_ROUND_UP(30000, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1;
 		} else {
 			tfaw = DIV_ROUND_UP(45000, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1;
 		}
 		break;
 	case 1600:
-		txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1;
-		tcke = DIV_ROUND_UP(MAX(3 * clkper, 5000), clkper) - 1;
+		txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1;
+		tcke = DIV_ROUND_UP(max(3 * clkper, 5000), clkper) - 1;
 		if (ddr3_cfg->pagesz == 1) {
 			tfaw = DIV_ROUND_UP(30000, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1;
 		} else {
 			tfaw = DIV_ROUND_UP(40000, clkper) - 1;
-			trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1;
+			trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1;
 		}
 		break;
 	default:
@@ -295,18 +295,18 @@
 		hang();
 		break;
 	}
-	txpdll = DIV_ROUND_UP(MAX(10 * clkper, 24000), clkper) - 1;
-	tcksre = DIV_ROUND_UP(MAX(5 * clkper, 10000), clkper);
+	txpdll = DIV_ROUND_UP(max(10 * clkper, 24000), clkper) - 1;
+	tcksre = DIV_ROUND_UP(max(5 * clkper, 10000), clkper);
 	taonpd = DIV_ROUND_UP(2000, clkper) - 1;
 	tcksrx = tcksre;
 	taofpd = taonpd;
 	twr  = DIV_ROUND_UP(15000, clkper) - 1;
-	tmrd = DIV_ROUND_UP(MAX(12 * clkper, 15000), clkper) - 1;
+	tmrd = DIV_ROUND_UP(max(12 * clkper, 15000), clkper) - 1;
 	trc  = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1;
 	tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1;
 	tcl  = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3;
 	trp  = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1;
-	twtr = ROUND(MAX(4 * clkper, 7500) / clkper, 1) - 1;
+	twtr = ROUND(max(4 * clkper, 7500) / clkper, 1) - 1;
 	trcd = trp;
 	trtp = twtr;
 	cs0_end = 4 * sysinfo->cs_density - 1;
diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c
index 59b3fe9..b57b2c3 100644
--- a/arch/x86/lib/physmem.c
+++ b/arch/x86/lib/physmem.c
@@ -189,7 +189,7 @@
 
 	/* Handle memory below 4GB. */
 	if (start <= max_addr) {
-		phys_size_t low_size = MIN(max_addr + 1 - start, size);
+		phys_size_t low_size = min(max_addr + 1 - start, size);
 		void *start_ptr = (void *)(uintptr_t)start;
 
 		assert(((phys_addr_t)(uintptr_t)start) == start);
@@ -208,7 +208,7 @@
 		/* Handle the first partial page. */
 		if (offset) {
 			phys_addr_t end =
-				MIN(map_addr + LARGE_PAGE_SIZE, start + size);
+				min(map_addr + LARGE_PAGE_SIZE, start + size);
 			phys_size_t cur_size = end - start;
 			x86_phys_memset_page(map_addr, offset, c, cur_size);
 			size -= cur_size;
diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c
index 6789efb..e683be3 100644
--- a/board/freescale/common/ics307_clk.c
+++ b/board/freescale/common/ics307_clk.c
@@ -67,7 +67,7 @@
 				continue;
 			/* Calculate the temp out frequency */
 			tmp_out = input_freq * 2 * vdw / (rdw * od * 1000);
-			diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out);
+			diff = max(out_freq, tmp_out) - min(out_freq, tmp_out);
 			/*
 			 * calculate the percent, the precision is 1/1000
 			 * If greater than 1/1000, continue
diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c
index 45e49c7..7ef7f12 100644
--- a/drivers/dma/fsl_dma.c
+++ b/drivers/dma/fsl_dma.c
@@ -96,7 +96,7 @@
 	uint xfer_size;
 
 	while (count) {
-		xfer_size = MIN(FSL_DMA_MAX_SIZE, count);
+		xfer_size = min(FSL_DMA_MAX_SIZE, count);
 
 		out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF));
 		out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF));
diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c
index fe66ce2..19fbe59 100644
--- a/drivers/i2c/ihs_i2c.c
+++ b/drivers/i2c/ihs_i2c.c
@@ -84,7 +84,7 @@
 	int shift = (alen-1) * 8;
 
 	while (alen) {
-		int transfer = MIN(alen, 2);
+		int transfer = min(alen, 2);
 		uchar buf[2];
 		bool is_last = alen <= transfer;
 
@@ -113,7 +113,7 @@
 		return 1;
 
 	while (len) {
-		int transfer = MIN(len, 2);
+		int transfer = min(len, 2);
 
 		if (ihs_i2c_transfer(chip, buffer, transfer, read,
 				     len <= transfer))
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 97d0389..26406072 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -610,7 +610,7 @@
 #endif
 
 	cfg->cfg.f_min = 400000;
-	cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000);
+	cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000);
 
 	cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index b030526..7fb0b92 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -475,7 +475,7 @@
 		if (space) {
 			write_buffer (&usbtty_output);
 
-			n = MIN (space, MIN (len, maxlen));
+			n = min(space, min(len, maxlen));
 			buf_push (&usbtty_output, str, n);
 
 			str += n;
@@ -882,7 +882,7 @@
 			space_avail =
 				current_urb->buffer_length -
 				current_urb->actual_length;
-			popnum = MIN (space_avail, buf->size);
+			popnum = min(space_avail, buf->size);
 			if (popnum == 0)
 				break;
 
diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c
index b7c1038..3559400 100644
--- a/drivers/usb/gadget/designware_udc.c
+++ b/drivers/usb/gadget/designware_udc.c
@@ -269,7 +269,7 @@
 		UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d",
 			urb->buffer, urb->buffer_length, urb->actual_length);
 
-		last = MIN(urb->actual_length - endpoint->sent,
+		last = min(urb->actual_length - endpoint->sent,
 			   endpoint->tx_packetSize);
 
 		if (last) {
@@ -285,7 +285,7 @@
 
 			align = ((ulong)cp % sizeof(int));
 			if (align)
-				last = MIN(last, sizeof(int) - align);
+				last = min(last, sizeof(int) - align);
 
 			UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d",
 				endpoint->sent, endpoint->tx_packetSize, last);
diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c
index b321488..4ba2f3d 100644
--- a/drivers/usb/gadget/ep0.c
+++ b/drivers/usb/gadget/ep0.c
@@ -315,7 +315,7 @@
 			/*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
 			if (max - urb->actual_length > 0) {
 				int length =
-					MIN (report_descriptor->wLength,
+					min(report_descriptor->wLength,
 					     max - urb->actual_length);
 				memcpy (urb->buffer + urb->actual_length,
 					&report_descriptor->bData[0], length);
diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c
index 7f72972..b3e178a 100644
--- a/drivers/usb/gadget/mpc8xx_udc.c
+++ b/drivers/usb/gadget/mpc8xx_udc.c
@@ -897,7 +897,7 @@
 		pkt_len = urb->actual_length - epi->sent;
 
 		if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) {
-			pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT);
+			pkt_len = min(epi->tx_packetSize, EP_MAX_PKT);
 		}
 
 		for (x = 0; x < pkt_len; x++) {
@@ -942,7 +942,7 @@
 
 		/* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
 		epi->sent += pkt_len;
-		epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize);
+		epi->last = min(urb->actual_length - epi->sent, epi->tx_packetSize);
 		TOGGLE_TX_PID (ep_ref[ep].pid);
 
 		if (epi->sent >= epi->tx_urb->actual_length) {
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 733558d..efd5c7f 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -65,7 +65,7 @@
 	if (!urb || !urb->actual_length)
 		return -1;
 
-	n = MIN(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
+	n = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
 	if (n <= 0)
 		return -1;
 
diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c
index 099d517..818d3d9 100644
--- a/fs/zfs/zfs.c
+++ b/fs/zfs/zfs.c
@@ -772,7 +772,7 @@
 
 	while (bseen < array_len) {
 		struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array;
-		int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
+		int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
 
 		if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft))
 			return 0;
@@ -794,7 +794,7 @@
 
 	while (bseen < array_len) {
 		struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array;
-		int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
+		int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
 
 		if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft))
 			/* Don't use errno because this error is to be ignored.  */
@@ -2118,7 +2118,7 @@
 		data->file_start = blkid * blksz;
 		data->file_end = data->file_start + blksz;
 
-		movesize = MIN(length, data->file_end - (int) file->offset - red);
+		movesize = min(length, data->file_end - (int)file->offset - red);
 
 		memmove(buf, data->file_buf + file->offset + red
 				- data->file_start, movesize);