Move MPC5xxx_FEC driver to drivers/net
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index bcf31cb..c68d3e7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -41,6 +41,7 @@
COBJS-$(CONFIG_DRIVER_LAN91C96) += lan91c96.o
COBJS-$(CONFIG_MACB) += macb.o
COBJS-$(CONFIG_MCFFEC) += mcffec.o
+COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
COBJS-$(CONFIG_NATSEMI) += natsemi.o
ifeq ($(CONFIG_DRIVER_NE2000),y)
COBJS-y += ne2000.o
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
new file mode 100644
index 0000000..3d3eb8b
--- /dev/null
+++ b/drivers/net/mpc5xxx_fec.c
@@ -0,0 +1,1067 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on mpc4200fec.c,
+ * (C) Copyright Motorola, Inc., 2000
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <mpc5xxx_sdma.h>
+#include <malloc.h>
+#include <net.h>
+#include <miiphy.h>
+#include "mpc5xxx_fec.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* #define DEBUG 0x28 */
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_MPC5xxx_FEC)
+
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
+#if (DEBUG & 0x60)
+static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec);
+static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec);
+#endif /* DEBUG */
+
+#if (DEBUG & 0x40)
+static uint32 local_crc32(char *string, unsigned int crc_value, int len);
+#endif
+
+typedef struct {
+ uint8 data[1500]; /* actual data */
+ int length; /* actual length */
+ int used; /* buffer in use or not */
+ uint8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */
+} NBUF;
+
+int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal);
+int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
+
+/********************************************************************/
+#if (DEBUG & 0x2)
+static void mpc5xxx_fec_phydump (char *devname)
+{
+ uint16 phyStatus, i;
+ uint8 phyAddr = CONFIG_PHY_ADDR;
+ uint8 reg_mask[] = {
+#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
+ /* regs to print: 0...7, 16...19, 21, 23, 24 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
+#else
+ /* regs to print: 0...8, 16...20 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+#endif
+ };
+
+ for (i = 0; i < 32; i++) {
+ if (reg_mask[i]) {
+ miiphy_read(devname, phyAddr, i, &phyStatus);
+ printf("Mii reg %d: 0x%04x\n", i, phyStatus);
+ }
+ }
+}
+#endif
+
+/********************************************************************/
+static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec)
+{
+ int ix;
+ char *data;
+ static int once = 0;
+
+ for (ix = 0; ix < FEC_RBD_NUM; ix++) {
+ if (!once) {
+ data = (char *)malloc(FEC_MAX_PKT_SIZE);
+ if (data == NULL) {
+ printf ("RBD INIT FAILED\n");
+ return -1;
+ }
+ fec->rbdBase[ix].dataPointer = (uint32)data;
+ }
+ fec->rbdBase[ix].status = FEC_RBD_EMPTY;
+ fec->rbdBase[ix].dataLength = 0;
+ }
+ once ++;
+
+ /*
+ * have the last RBD to close the ring
+ */
+ fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
+ fec->rbdIndex = 0;
+
+ return 0;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec)
+{
+ int ix;
+
+ for (ix = 0; ix < FEC_TBD_NUM; ix++) {
+ fec->tbdBase[ix].status = 0;
+ }
+
+ /*
+ * Have the last TBD to close the ring
+ */
+ fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
+
+ /*
+ * Initialize some indices
+ */
+ fec->tbdIndex = 0;
+ fec->usedTbdIndex = 0;
+ fec->cleanTbdNum = FEC_TBD_NUM;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd)
+{
+ /*
+ * Reset buffer descriptor as empty
+ */
+ if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
+ pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
+ else
+ pRbd->status = FEC_RBD_EMPTY;
+
+ pRbd->dataLength = 0;
+
+ /*
+ * Now, we have an empty RxBD, restart the SmartDMA receive task
+ */
+ SDMA_TASK_ENABLE(FEC_RECV_TASK_NO);
+
+ /*
+ * Increment BD count
+ */
+ fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec)
+{
+ volatile FEC_TBD *pUsedTbd;
+
+#if (DEBUG & 0x1)
+ printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
+ fec->cleanTbdNum, fec->usedTbdIndex);
+#endif
+
+ /*
+ * process all the consumed TBDs
+ */
+ while (fec->cleanTbdNum < FEC_TBD_NUM) {
+ pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
+ if (pUsedTbd->status & FEC_TBD_READY) {
+#if (DEBUG & 0x20)
+ printf("Cannot clean TBD %d, in use\n", fec->cleanTbdNum);
+#endif
+ return;
+ }
+
+ /*
+ * clean this buffer descriptor
+ */
+ if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
+ pUsedTbd->status = FEC_TBD_WRAP;
+ else
+ pUsedTbd->status = 0;
+
+ /*
+ * update some indeces for a correct handling of the TBD ring
+ */
+ fec->cleanTbdNum++;
+ fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
+ }
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac)
+{
+ uint8 currByte; /* byte for which to compute the CRC */
+ int byte; /* loop - counter */
+ int bit; /* loop - counter */
+ uint32 crc = 0xffffffff; /* initial value */
+
+ /*
+ * The algorithm used is the following:
+ * we loop on each of the six bytes of the provided address,
+ * and we compute the CRC by left-shifting the previous
+ * value by one position, so that each bit in the current
+ * byte of the address may contribute the calculation. If
+ * the latter and the MSB in the CRC are different, then
+ * the CRC value so computed is also ex-ored with the
+ * "polynomium generator". The current byte of the address
+ * is also shifted right by one bit at each iteration.
+ * This is because the CRC generatore in hardware is implemented
+ * as a shift-register with as many ex-ores as the radixes
+ * in the polynomium. This suggests that we represent the
+ * polynomiumm itself as a 32-bit constant.
+ */
+ for (byte = 0; byte < 6; byte++) {
+ currByte = mac[byte];
+ for (bit = 0; bit < 8; bit++) {
+ if ((currByte & 0x01) ^ (crc & 0x01)) {
+ crc >>= 1;
+ crc = crc ^ 0xedb88320;
+ } else {
+ crc >>= 1;
+ }
+ currByte >>= 1;
+ }
+ }
+
+ crc = crc >> 26;
+
+ /*
+ * Set individual hash table register
+ */
+ if (crc >= 32) {
+ fec->eth->iaddr1 = (1 << (crc - 32));
+ fec->eth->iaddr2 = 0;
+ } else {
+ fec->eth->iaddr1 = 0;
+ fec->eth->iaddr2 = (1 << crc);
+ }
+
+ /*
+ * Set physical address
+ */
+ fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
+ fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
+}
+
+/********************************************************************/
+static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
+{
+ mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+ struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
+
+#if (DEBUG & 0x1)
+ printf ("mpc5xxx_fec_init... Begin\n");
+#endif
+
+ /*
+ * Initialize RxBD/TxBD rings
+ */
+ mpc5xxx_fec_rbd_init(fec);
+ mpc5xxx_fec_tbd_init(fec);
+
+ /*
+ * Clear FEC-Lite interrupt event register(IEVENT)
+ */
+ fec->eth->ievent = 0xffffffff;
+
+ /*
+ * Set interrupt mask register
+ */
+ fec->eth->imask = 0x00000000;
+
+ /*
+ * Set FEC-Lite receive control register(R_CNTRL):
+ */
+ if (fec->xcv_type == SEVENWIRE) {
+ /*
+ * Frame length=1518; 7-wire mode
+ */
+ fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
+ } else {
+ /*
+ * Frame length=1518; MII mode;
+ */
+ fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
+ }
+
+ fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
+ if (fec->xcv_type != SEVENWIRE) {
+ /*
+ * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
+ * and do not drop the Preamble.
+ */
+ fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ }
+
+ /*
+ * Set Opcode/Pause Duration Register
+ */
+ fec->eth->op_pause = 0x00010020; /*FIXME 0xffff0020; */
+
+ /*
+ * Set Rx FIFO alarm and granularity value
+ */
+ fec->eth->rfifo_cntrl = 0x0c000000
+ | (fec->eth->rfifo_cntrl & ~0x0f000000);
+ fec->eth->rfifo_alarm = 0x0000030c;
+#if (DEBUG & 0x22)
+ if (fec->eth->rfifo_status & 0x00700000 ) {
+ printf("mpc5xxx_fec_init() RFIFO error\n");
+ }
+#endif
+
+ /*
+ * Set Tx FIFO granularity value
+ */
+ fec->eth->tfifo_cntrl = 0x0c000000
+ | (fec->eth->tfifo_cntrl & ~0x0f000000);
+#if (DEBUG & 0x2)
+ printf("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
+ printf("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
+#endif
+
+ /*
+ * Set transmit fifo watermark register(X_WMRK), default = 64
+ */
+ fec->eth->tfifo_alarm = 0x00000080;
+ fec->eth->x_wmrk = 0x2;
+
+ /*
+ * Set individual address filter for unicast address
+ * and set physical address registers.
+ */
+ mpc5xxx_fec_set_hwaddr(fec, (char *)dev->enetaddr);
+
+ /*
+ * Set multicast address filter
+ */
+ fec->eth->gaddr1 = 0x00000000;
+ fec->eth->gaddr2 = 0x00000000;
+
+ /*
+ * Turn ON cheater FSM: ????
+ */
+ fec->eth->xmit_fsm = 0x03000000;
+
+#if defined(CONFIG_MPC5200)
+ /*
+ * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
+ * work w/ the current receive task.
+ */
+ sdma->PtdCntrl |= 0x00000001;
+#endif
+
+ /*
+ * Set priority of different initiators
+ */
+ sdma->IPR0 = 7; /* always */
+ sdma->IPR3 = 6; /* Eth RX */
+ sdma->IPR4 = 5; /* Eth Tx */
+
+ /*
+ * Clear SmartDMA task interrupt pending bits
+ */
+ SDMA_CLEAR_IEVENT(FEC_RECV_TASK_NO);
+
+ /*
+ * Initialize SmartDMA parameters stored in SRAM
+ */
+ *(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase;
+ *(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase;
+ *(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase;
+ *(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase;
+
+ /*
+ * Enable FEC-Lite controller
+ */
+ fec->eth->ecntrl |= 0x00000006;
+
+#if (DEBUG & 0x2)
+ if (fec->xcv_type != SEVENWIRE)
+ mpc5xxx_fec_phydump (dev->name);
+#endif
+
+ /*
+ * Enable SmartDMA receive task
+ */
+ SDMA_TASK_ENABLE(FEC_RECV_TASK_NO);
+
+#if (DEBUG & 0x1)
+ printf("mpc5xxx_fec_init... Done \n");
+#endif
+
+ return 1;
+}
+
+/********************************************************************/
+static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
+{
+ mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+ const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
+
+#if (DEBUG & 0x1)
+ printf ("mpc5xxx_fec_init_phy... Begin\n");
+#endif
+
+ /*
+ * Initialize GPIO pins
+ */
+ if (fec->xcv_type == SEVENWIRE) {
+ /* 10MBit with 7-wire operation */
+#if defined(CONFIG_TOTAL5200)
+ /* 7-wire and USB2 on Ethernet */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00030000;
+#else /* !CONFIG_TOTAL5200 */
+ /* 7-wire only */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000;
+#endif /* CONFIG_TOTAL5200 */
+ } else {
+ /* 100MBit with MD operation */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000;
+ }
+
+ /*
+ * Clear FEC-Lite interrupt event register(IEVENT)
+ */
+ fec->eth->ievent = 0xffffffff;
+
+ /*
+ * Set interrupt mask register
+ */
+ fec->eth->imask = 0x00000000;
+
+/*
+ * In original Promess-provided code PHY initialization is disabled with the
+ * following comment: "Phy initialization is DISABLED for now. There was a
+ * problem with running 100 Mbps on PRO board". Thus we temporarily disable
+ * PHY initialization for the Motion-PRO board, until a proper fix is found.
+ */
+
+ if (fec->xcv_type != SEVENWIRE) {
+ /*
+ * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
+ * and do not drop the Preamble.
+ */
+ fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+ }
+
+ if (fec->xcv_type != SEVENWIRE) {
+ /*
+ * Initialize PHY(LXT971A):
+ *
+ * Generally, on power up, the LXT971A reads its configuration
+ * pins to check for forced operation, If not cofigured for
+ * forced operation, it uses auto-negotiation/parallel detection
+ * to automatically determine line operating conditions.
+ * If the PHY device on the other side of the link supports
+ * auto-negotiation, the LXT971A auto-negotiates with it
+ * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
+ * support auto-negotiation, the LXT971A automatically detects
+ * the presence of either link pulses(10Mbps PHY) or Idle
+ * symbols(100Mbps) and sets its operating conditions accordingly.
+ *
+ * When auto-negotiation is controlled by software, the following
+ * steps are recommended.
+ *
+ * Note:
+ * The physical address is dependent on hardware configuration.
+ *
+ */
+ int timeout = 1;
+ uint16 phyStatus;
+
+ /*
+ * Reset PHY, then delay 300ns
+ */
+ miiphy_write(dev->name, phyAddr, 0x0, 0x8000);
+ udelay(1000);
+
+#if defined(CONFIG_UC101) || defined(CONFIG_MUCMC52)
+ /* Set the LED configuration Register for the UC101
+ and MUCMC52 Board */
+ miiphy_write(dev->name, phyAddr, 0x14, 0x4122);
+#endif
+ if (fec->xcv_type == MII10) {
+ /*
+ * Force 10Base-T, FDX operation
+ */
+#if (DEBUG & 0x2)
+ printf("Forcing 10 Mbps ethernet link... ");
+#endif
+ miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
+ /*
+ miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100);
+ */
+ miiphy_write(dev->name, phyAddr, 0x0, 0x0180);
+
+ timeout = 20;
+ do { /* wait for link status to go down */
+ udelay(10000);
+ if ((timeout--) == 0) {
+#if (DEBUG & 0x2)
+ printf("hmmm, should not have waited...");
+#endif
+ break;
+ }
+ miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
+#if (DEBUG & 0x2)
+ printf("=");
+#endif
+ } while ((phyStatus & 0x0004)); /* !link up */
+
+ timeout = 1000;
+ do { /* wait for link status to come back up */
+ udelay(10000);
+ if ((timeout--) == 0) {
+ printf("failed. Link is down.\n");
+ break;
+ }
+ miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
+#if (DEBUG & 0x2)
+ printf("+");
+#endif
+ } while (!(phyStatus & 0x0004)); /* !link up */
+
+#if (DEBUG & 0x2)
+ printf ("done.\n");
+#endif
+ } else { /* MII100 */
+ /*
+ * Set the auto-negotiation advertisement register bits
+ */
+ miiphy_write(dev->name, phyAddr, 0x4, 0x01e1);
+
+ /*
+ * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
+ */
+ miiphy_write(dev->name, phyAddr, 0x0, 0x1200);
+
+ /*
+ * Wait for AN completion
+ */
+ timeout = 5000;
+ do {
+ udelay(1000);
+
+ if ((timeout--) == 0) {
+#if (DEBUG & 0x2)
+ printf("PHY auto neg 0 failed...\n");
+#endif
+ return -1;
+ }
+
+ if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) {
+#if (DEBUG & 0x2)
+ printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
+#endif
+ return -1;
+ }
+ } while (!(phyStatus & 0x0004));
+
+#if (DEBUG & 0x2)
+ printf("PHY auto neg complete! \n");
+#endif
+ }
+
+ }
+
+#if (DEBUG & 0x2)
+ if (fec->xcv_type != SEVENWIRE)
+ mpc5xxx_fec_phydump (dev->name);
+#endif
+
+
+#if (DEBUG & 0x1)
+ printf("mpc5xxx_fec_init_phy... Done \n");
+#endif
+
+ return 1;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_halt(struct eth_device *dev)
+{
+#if defined(CONFIG_MPC5200)
+ struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
+#endif
+ mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+ int counter = 0xffff;
+
+#if (DEBUG & 0x2)
+ if (fec->xcv_type != SEVENWIRE)
+ mpc5xxx_fec_phydump (dev->name);
+#endif
+
+ /*
+ * mask FEC chip interrupts
+ */
+ fec->eth->imask = 0;
+
+ /*
+ * issue graceful stop command to the FEC transmitter if necessary
+ */
+ fec->eth->x_cntrl |= 0x00000001;
+
+ /*
+ * wait for graceful stop to register
+ */
+ while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ;
+
+ /*
+ * Disable SmartDMA tasks
+ */
+ SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
+ SDMA_TASK_DISABLE (FEC_RECV_TASK_NO);
+
+#if defined(CONFIG_MPC5200)
+ /*
+ * Turn on COMM bus prefetch in the MGT5200 BestComm after we're
+ * done. It doesn't work w/ the current receive task.
+ */
+ sdma->PtdCntrl &= ~0x00000001;
+#endif
+
+ /*
+ * Disable the Ethernet Controller
+ */
+ fec->eth->ecntrl &= 0xfffffffd;
+
+ /*
+ * Clear FIFO status registers
+ */
+ fec->eth->rfifo_status &= 0x00700000;
+ fec->eth->tfifo_status &= 0x00700000;
+
+ fec->eth->reset_cntrl = 0x01000000;
+
+ /*
+ * Issue a reset command to the FEC chip
+ */
+ fec->eth->ecntrl |= 0x1;
+
+ /*
+ * wait at least 16 clock cycles
+ */
+ udelay(10);
+
+#if (DEBUG & 0x3)
+ printf("Ethernet task stopped\n");
+#endif
+}
+
+#if (DEBUG & 0x60)
+/********************************************************************/
+
+static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec)
+{
+ uint16 phyAddr = CONFIG_PHY_ADDR;
+ uint16 phyStatus;
+
+ if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
+ || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
+
+ miiphy_read(devname, phyAddr, 0x1, &phyStatus);
+ printf("\nphyStatus: 0x%04x\n", phyStatus);
+ printf("ecntrl: 0x%08x\n", fec->eth->ecntrl);
+ printf("ievent: 0x%08x\n", fec->eth->ievent);
+ printf("x_status: 0x%08x\n", fec->eth->x_status);
+ printf("tfifo: status 0x%08x\n", fec->eth->tfifo_status);
+
+ printf(" control 0x%08x\n", fec->eth->tfifo_cntrl);
+ printf(" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr);
+ printf(" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr);
+ printf(" alarm 0x%08x\n", fec->eth->tfifo_alarm);
+ printf(" readptr 0x%08x\n", fec->eth->tfifo_rdptr);
+ printf(" writptr 0x%08x\n", fec->eth->tfifo_wrptr);
+ }
+}
+
+static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec)
+{
+ uint16 phyAddr = CONFIG_PHY_ADDR;
+ uint16 phyStatus;
+
+ if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
+ || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
+
+ miiphy_read(devname, phyAddr, 0x1, &phyStatus);
+ printf("\nphyStatus: 0x%04x\n", phyStatus);
+ printf("ecntrl: 0x%08x\n", fec->eth->ecntrl);
+ printf("ievent: 0x%08x\n", fec->eth->ievent);
+ printf("x_status: 0x%08x\n", fec->eth->x_status);
+ printf("rfifo: status 0x%08x\n", fec->eth->rfifo_status);
+
+ printf(" control 0x%08x\n", fec->eth->rfifo_cntrl);
+ printf(" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr);
+ printf(" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr);
+ printf(" alarm 0x%08x\n", fec->eth->rfifo_alarm);
+ printf(" readptr 0x%08x\n", fec->eth->rfifo_rdptr);
+ printf(" writptr 0x%08x\n", fec->eth->rfifo_wrptr);
+ }
+}
+#endif /* DEBUG */
+
+/********************************************************************/
+
+static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data,
+ int data_length)
+{
+ /*
+ * This routine transmits one frame. This routine only accepts
+ * 6-byte Ethernet addresses.
+ */
+ mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+ volatile FEC_TBD *pTbd;
+
+#if (DEBUG & 0x20)
+ printf("tbd status: 0x%04x\n", fec->tbdBase[0].status);
+ tfifo_print(dev->name, fec);
+#endif
+
+ /*
+ * Clear Tx BD ring at first
+ */
+ mpc5xxx_fec_tbd_scrub(fec);
+
+ /*
+ * Check for valid length of data.
+ */
+ if ((data_length > 1500) || (data_length <= 0)) {
+ return -1;
+ }
+
+ /*
+ * Check the number of vacant TxBDs.
+ */
+ if (fec->cleanTbdNum < 1) {
+#if (DEBUG & 0x20)
+ printf("No available TxBDs ...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * Get the first TxBD to send the mac header
+ */
+ pTbd = &fec->tbdBase[fec->tbdIndex];
+ pTbd->dataLength = data_length;
+ pTbd->dataPointer = (uint32)eth_data;
+ pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
+ fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
+
+#if (DEBUG & 0x100)
+ printf("SDMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
+#endif
+
+ /*
+ * Kick the MII i/f
+ */
+ if (fec->xcv_type != SEVENWIRE) {
+ uint16 phyStatus;
+ miiphy_read(dev->name, 0, 0x1, &phyStatus);
+ }
+
+ /*
+ * Enable SmartDMA transmit task
+ */
+
+#if (DEBUG & 0x20)
+ tfifo_print(dev->name, fec);
+#endif
+ SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
+#if (DEBUG & 0x20)
+ tfifo_print(dev->name, fec);
+#endif
+#if (DEBUG & 0x8)
+ printf( "+" );
+#endif
+
+ fec->cleanTbdNum -= 1;
+
+#if (DEBUG & 0x129) && (DEBUG & 0x80000000)
+ printf ("smartDMA ethernet Tx task enabled\n");
+#endif
+ /*
+ * wait until frame is sent .
+ */
+ while (pTbd->status & FEC_TBD_READY) {
+ udelay(10);
+#if (DEBUG & 0x8)
+ printf ("TDB status = %04x\n", pTbd->status);
+#endif
+ }
+
+ return 0;
+}
+
+
+/********************************************************************/
+static int mpc5xxx_fec_recv(struct eth_device *dev)
+{
+ /*
+ * This command pulls one frame from the card
+ */
+ mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+ volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
+ unsigned long ievent;
+ int frame_length, len = 0;
+ NBUF *frame;
+ uchar buff[FEC_MAX_PKT_SIZE];
+
+#if (DEBUG & 0x1)
+ printf ("mpc5xxx_fec_recv %d Start...\n", fec->rbdIndex);
+#endif
+#if (DEBUG & 0x8)
+ printf( "-" );
+#endif
+
+ /*
+ * Check if any critical events have happened
+ */
+ ievent = fec->eth->ievent;
+ fec->eth->ievent = ievent;
+ if (ievent & 0x20060000) {
+ /* BABT, Rx/Tx FIFO errors */
+ mpc5xxx_fec_halt(dev);
+ mpc5xxx_fec_init(dev, NULL);
+ return 0;
+ }
+ if (ievent & 0x80000000) {
+ /* Heartbeat error */
+ fec->eth->x_cntrl |= 0x00000001;
+ }
+ if (ievent & 0x10000000) {
+ /* Graceful stop complete */
+ if (fec->eth->x_cntrl & 0x00000001) {
+ mpc5xxx_fec_halt(dev);
+ fec->eth->x_cntrl &= ~0x00000001;
+ mpc5xxx_fec_init(dev, NULL);
+ }
+ }
+
+ if (!(pRbd->status & FEC_RBD_EMPTY)) {
+ if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) &&
+ ((pRbd->dataLength - 4) > 14)) {
+
+ /*
+ * Get buffer address and size
+ */
+ frame = (NBUF *)pRbd->dataPointer;
+ frame_length = pRbd->dataLength - 4;
+
+#if (DEBUG & 0x20)
+ {
+ int i;
+ printf("recv data hdr:");
+ for (i = 0; i < 14; i++)
+ printf("%x ", *(frame->head + i));
+ printf("\n");
+ }
+#endif
+ /*
+ * Fill the buffer and pass it to upper layers
+ */
+ memcpy(buff, frame->head, 14);
+ memcpy(buff + 14, frame->data, frame_length);
+ NetReceive(buff, frame_length);
+ len = frame_length;
+ }
+ /*
+ * Reset buffer descriptor as empty
+ */
+ mpc5xxx_fec_rbd_clean(fec, pRbd);
+ }
+ SDMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
+ return len;
+}
+
+
+/********************************************************************/
+int mpc5xxx_fec_initialize(bd_t * bis)
+{
+ mpc5xxx_fec_priv *fec;
+ struct eth_device *dev;
+ char *tmp, *end;
+ char env_enetaddr[6];
+ int i;
+
+ fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec));
+ dev = (struct eth_device *)malloc(sizeof(*dev));
+ memset(dev, 0, sizeof *dev);
+
+ fec->eth = (ethernet_regs *)MPC5XXX_FEC;
+ fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
+ fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
+#if defined(CONFIG_CANMB) || \
+ defined(CONFIG_CM5200) || \
+ defined(CONFIG_HMI1001) || \
+ defined(CONFIG_ICECUBE) || \
+ defined(CONFIG_INKA4X0) || \
+ defined(CONFIG_JUPITER) || \
+ defined(CONFIG_MCC200) || \
+ defined(CONFIG_MOTIONPRO) || \
+ defined(CONFIG_MUCMC52) || \
+ defined(CONFIG_O2DNT) || \
+ defined(CONFIG_PM520) || \
+ defined(CONFIG_TOP5200) || \
+ defined(CONFIG_TQM5200) || \
+ defined(CONFIG_UC101) || \
+ defined(CONFIG_V38B) || \
+ defined(CONFIG_MUNICES)
+# ifndef CONFIG_FEC_10MBIT
+ fec->xcv_type = MII100;
+# else
+ fec->xcv_type = MII10;
+# endif
+#elif defined(CONFIG_TOTAL5200)
+ fec->xcv_type = SEVENWIRE;
+#else
+#error fec->xcv_type not initialized.
+#endif
+
+ dev->priv = (void *)fec;
+ dev->iobase = MPC5XXX_FEC;
+ dev->init = mpc5xxx_fec_init;
+ dev->halt = mpc5xxx_fec_halt;
+ dev->send = mpc5xxx_fec_send;
+ dev->recv = mpc5xxx_fec_recv;
+
+ sprintf(dev->name, "FEC ETHERNET");
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register (dev->name,
+ fec5xxx_miiphy_read, fec5xxx_miiphy_write);
+#endif
+
+ /*
+ * Try to set the mac address now. The fec mac address is
+ * a garbage after reset. When not using fec for booting
+ * the Linux fec driver will try to work with this garbage.
+ */
+ tmp = getenv("ethaddr");
+ if (tmp) {
+ for (i=0; i<6; i++) {
+ env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end+1 : end;
+ }
+ mpc5xxx_fec_set_hwaddr(fec, env_enetaddr);
+ }
+
+ mpc5xxx_fec_init_phy(dev, bis);
+
+ return 1;
+}
+
+/* MII-interface related functions */
+/********************************************************************/
+int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
+{
+ ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
+ uint32 reg; /* convenient holder for the PHY register */
+ uint32 phy; /* convenient holder for the PHY */
+ int timeout = 0xffff;
+
+ /*
+ * reading from any PHY's register is done by properly
+ * programming the FEC's MII data register.
+ */
+ reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+ eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg);
+
+ /*
+ * wait for the related interrupt
+ */
+ while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+
+ if (timeout == 0) {
+#if (DEBUG & 0x2)
+ printf ("Read MDIO failed...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * clear mii interrupt bit
+ */
+ eth->ievent = 0x00800000;
+
+ /*
+ * it's now safe to read the PHY's register
+ */
+ *retVal = (uint16) eth->mii_data;
+
+ return 0;
+}
+
+/********************************************************************/
+int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
+{
+ ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
+ uint32 reg; /* convenient holder for the PHY register */
+ uint32 phy; /* convenient holder for the PHY */
+ int timeout = 0xffff;
+
+ reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+ phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+ eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
+ FEC_MII_DATA_TA | phy | reg | data);
+
+ /*
+ * wait for the MII interrupt
+ */
+ while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+
+ if (timeout == 0) {
+#if (DEBUG & 0x2)
+ printf ("Write MDIO failed...\n");
+#endif
+ return -1;
+ }
+
+ /*
+ * clear MII interrupt bit
+ */
+ eth->ievent = 0x00800000;
+
+ return 0;
+}
+
+#if (DEBUG & 0x40)
+static uint32 local_crc32(char *string, unsigned int crc_value, int len)
+{
+ int i;
+ char c;
+ unsigned int crc, count;
+
+ /*
+ * crc32 algorithm
+ */
+ /*
+ * crc = 0xffffffff; * The initialized value should be 0xffffffff
+ */
+ crc = crc_value;
+
+ for (i = len; --i >= 0;) {
+ c = *string++;
+ for (count = 0; count < 8; count++) {
+ if ((c & 0x01) ^ (crc & 0x01)) {
+ crc >>= 1;
+ crc = crc ^ 0xedb88320;
+ } else {
+ crc >>= 1;
+ }
+ c >>= 1;
+ }
+ }
+
+ /*
+ * In big endian system, do byte swaping for crc value
+ */
+ /**/ return crc;
+}
+#endif /* DEBUG */
+
+#endif /* CONFIG_MPC5xxx_FEC */
diff --git a/drivers/net/mpc5xxx_fec.h b/drivers/net/mpc5xxx_fec.h
new file mode 100644
index 0000000..16c3e8e
--- /dev/null
+++ b/drivers/net/mpc5xxx_fec.h
@@ -0,0 +1,282 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on mpc4200fec.h
+ * (C) Copyright Motorola, Inc., 2000
+ *
+ * odin ethernet header file
+ */
+
+#ifndef __MPC5XXX_FEC_H
+#define __MPC5XXX_FEC_H
+
+typedef unsigned long uint32;
+typedef unsigned short uint16;
+typedef unsigned char uint8;
+
+typedef struct ethernet_register_set {
+
+/* [10:2]addr = 00 */
+
+/* Control and status Registers (offset 000-1FF) */
+
+ volatile uint32 fec_id; /* MBAR_ETH + 0x000 */
+ volatile uint32 ievent; /* MBAR_ETH + 0x004 */
+ volatile uint32 imask; /* MBAR_ETH + 0x008 */
+
+ volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */
+ volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */
+ volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */
+ volatile uint32 r_des_active_cl; /* MBAR_ETH + 0x018 */
+ volatile uint32 x_des_active_cl; /* MBAR_ETH + 0x01C */
+ volatile uint32 ivent_set; /* MBAR_ETH + 0x020 */
+ volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */
+
+ volatile uint32 RES1[6]; /* MBAR_ETH + 0x028-03C */
+ volatile uint32 mii_data; /* MBAR_ETH + 0x040 */
+ volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */
+ volatile uint32 mii_status; /* MBAR_ETH + 0x048 */
+
+ volatile uint32 RES2[5]; /* MBAR_ETH + 0x04C-05C */
+ volatile uint32 mib_data; /* MBAR_ETH + 0x060 */
+ volatile uint32 mib_control; /* MBAR_ETH + 0x064 */
+
+ volatile uint32 RES3[6]; /* MBAR_ETH + 0x068-7C */
+ volatile uint32 r_activate; /* MBAR_ETH + 0x080 */
+ volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */
+ volatile uint32 r_hash; /* MBAR_ETH + 0x088 */
+ volatile uint32 r_data; /* MBAR_ETH + 0x08C */
+ volatile uint32 ar_done; /* MBAR_ETH + 0x090 */
+ volatile uint32 r_test; /* MBAR_ETH + 0x094 */
+ volatile uint32 r_mib; /* MBAR_ETH + 0x098 */
+ volatile uint32 r_da_low; /* MBAR_ETH + 0x09C */
+ volatile uint32 r_da_high; /* MBAR_ETH + 0x0A0 */
+
+ volatile uint32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */
+ volatile uint32 x_activate; /* MBAR_ETH + 0x0C0 */
+ volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */
+ volatile uint32 backoff; /* MBAR_ETH + 0x0C8 */
+ volatile uint32 x_data; /* MBAR_ETH + 0x0CC */
+ volatile uint32 x_status; /* MBAR_ETH + 0x0D0 */
+ volatile uint32 x_mib; /* MBAR_ETH + 0x0D4 */
+ volatile uint32 x_test; /* MBAR_ETH + 0x0D8 */
+ volatile uint32 fdxfc_da1; /* MBAR_ETH + 0x0DC */
+ volatile uint32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */
+ volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */
+ volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */
+ volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */
+
+ volatile uint32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */
+ volatile uint32 instr_reg; /* MBAR_ETH + 0x100 */
+ volatile uint32 context_reg; /* MBAR_ETH + 0x104 */
+ volatile uint32 test_cntrl; /* MBAR_ETH + 0x108 */
+ volatile uint32 acc_reg; /* MBAR_ETH + 0x10C */
+ volatile uint32 ones; /* MBAR_ETH + 0x110 */
+ volatile uint32 zeros; /* MBAR_ETH + 0x114 */
+ volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */
+ volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */
+ volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */
+ volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */
+ volatile uint32 random; /* MBAR_ETH + 0x128 */
+ volatile uint32 rand1; /* MBAR_ETH + 0x12C */
+ volatile uint32 tmp; /* MBAR_ETH + 0x130 */
+
+ volatile uint32 RES6[3]; /* MBAR_ETH + 0x134-13C */
+ volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */
+ volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */
+ volatile uint32 fcntrl; /* MBAR_ETH + 0x148 */
+ volatile uint32 r_bound; /* MBAR_ETH + 0x14C */
+ volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */
+ volatile uint32 r_count; /* MBAR_ETH + 0x154 */
+ volatile uint32 r_lag; /* MBAR_ETH + 0x158 */
+ volatile uint32 r_read; /* MBAR_ETH + 0x15C */
+ volatile uint32 r_write; /* MBAR_ETH + 0x160 */
+ volatile uint32 x_count; /* MBAR_ETH + 0x164 */
+ volatile uint32 x_lag; /* MBAR_ETH + 0x168 */
+ volatile uint32 x_retry; /* MBAR_ETH + 0x16C */
+ volatile uint32 x_write; /* MBAR_ETH + 0x170 */
+ volatile uint32 x_read; /* MBAR_ETH + 0x174 */
+
+ volatile uint32 RES7[2]; /* MBAR_ETH + 0x178-17C */
+ volatile uint32 fm_cntrl; /* MBAR_ETH + 0x180 */
+ volatile uint32 rfifo_data; /* MBAR_ETH + 0x184 */
+ volatile uint32 rfifo_status; /* MBAR_ETH + 0x188 */
+ volatile uint32 rfifo_cntrl; /* MBAR_ETH + 0x18C */
+ volatile uint32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */
+ volatile uint32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */
+ volatile uint32 rfifo_alarm; /* MBAR_ETH + 0x198 */
+ volatile uint32 rfifo_rdptr; /* MBAR_ETH + 0x19C */
+ volatile uint32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */
+ volatile uint32 tfifo_data; /* MBAR_ETH + 0x1A4 */
+ volatile uint32 tfifo_status; /* MBAR_ETH + 0x1A8 */
+ volatile uint32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */
+ volatile uint32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */
+ volatile uint32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */
+ volatile uint32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */
+ volatile uint32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */
+ volatile uint32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */
+
+ volatile uint32 reset_cntrl; /* MBAR_ETH + 0x1C4 */
+ volatile uint32 xmit_fsm; /* MBAR_ETH + 0x1C8 */
+
+ volatile uint32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */
+ volatile uint32 rdes_data0; /* MBAR_ETH + 0x1D8 */
+ volatile uint32 rdes_data1; /* MBAR_ETH + 0x1DC */
+ volatile uint32 r_length; /* MBAR_ETH + 0x1E0 */
+ volatile uint32 x_length; /* MBAR_ETH + 0x1E4 */
+ volatile uint32 x_addr; /* MBAR_ETH + 0x1E8 */
+ volatile uint32 cdes_data; /* MBAR_ETH + 0x1EC */
+ volatile uint32 status; /* MBAR_ETH + 0x1F0 */
+ volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */
+ volatile uint32 des_cmnd; /* MBAR_ETH + 0x1F8 */
+ volatile uint32 data; /* MBAR_ETH + 0x1FC */
+
+/* MIB COUNTERS (Offset 200-2FF) */
+
+ volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */
+ volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */
+ volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
+ volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */
+ volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */
+ volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */
+ volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */
+ volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */
+ volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */
+ volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */
+ volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */
+ volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */
+ volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */
+ volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */
+ volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */
+ volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */
+ volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */
+ volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */
+ volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */
+ volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */
+ volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */
+ volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */
+ volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */
+ volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */
+ volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */
+ volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */
+ volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */
+ volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */
+ volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */
+ volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */
+
+ volatile uint32 RES9[2]; /* MBAR_ETH + 0x278-27C */
+ volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */
+ volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */
+ volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */
+ volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */
+ volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */
+ volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */
+ volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */
+ volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */
+ volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */
+
+ volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */
+
+ volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */
+ volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */
+ volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */
+ volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */
+ volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */
+ volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */
+ volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */
+ volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */
+ volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */
+ volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */
+ volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */
+ volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */
+ volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */
+ volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */
+ volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
+
+ volatile uint32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */
+
+ volatile uint32 RES11[64]; /* MBAR_ETH + 0x300-3FF */
+} ethernet_regs;
+
+/* Receive & Transmit Buffer Descriptor definitions */
+typedef struct BufferDescriptor {
+ uint16 status;
+ uint16 dataLength;
+ uint32 dataPointer;
+} FEC_RBD;
+typedef struct {
+ uint16 status;
+ uint16 dataLength;
+ uint32 dataPointer;
+} FEC_TBD;
+
+/* private structure */
+typedef enum {
+ SEVENWIRE, /* 7-wire */
+ MII10, /* MII 10Mbps */
+ MII100 /* MII 100Mbps */
+} xceiver_type;
+
+typedef struct {
+ ethernet_regs *eth;
+ xceiver_type xcv_type; /* transceiver type */
+ FEC_RBD *rbdBase; /* RBD ring */
+ FEC_TBD *tbdBase; /* TBD ring */
+ uint16 rbdIndex; /* next receive BD to read */
+ uint16 tbdIndex; /* next transmit BD to send */
+ uint16 usedTbdIndex; /* next transmit BD to clean */
+ uint16 cleanTbdNum; /* the number of available transmit BDs */
+} mpc5xxx_fec_priv;
+
+/* Ethernet parameter area */
+#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00)
+#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04)
+#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08)
+#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c)
+
+/* BD Numer definitions */
+#define FEC_TBD_NUM 48 /* The user can adjust this value */
+#define FEC_RBD_NUM 32 /* The user can adjust this value */
+
+/* packet size limit */
+#define FEC_MAX_PKT_SIZE 1536
+
+/* RBD bits definitions */
+#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */
+#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */
+#define FEC_RBD_INT 0x1000 /* Interrupt */
+#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */
+#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */
+#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */
+#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */
+#define FEC_RBD_LG 0x0020 /* Frame length violation */
+#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */
+#define FEC_RBD_SH 0x0008 /* Short frame */
+#define FEC_RBD_CR 0x0004 /* CRC error */
+#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */
+#define FEC_RBD_TR 0x0001 /* Frame is truncated */
+#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
+ FEC_RBD_OV | FEC_RBD_TR)
+
+/* TBD bits definitions */
+#define FEC_TBD_READY 0x8000 /* Buffer is ready */
+#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */
+#define FEC_TBD_INT 0x1000 /* Interrupt */
+#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */
+#define FEC_TBD_TC 0x0400 /* Transmit the CRC */
+#define FEC_TBD_ABC 0x0200 /* Append bad CRC */
+
+/* MII-related definitios */
+#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */
+#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */
+#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */
+#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */
+#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */
+#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
+#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */
+
+#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */
+#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */
+
+#endif /* __MPC5XXX_FEC_H */