board: stm32f429-discovery: switch to DM STM32 sdram driver
Use available DM stm32_sdram.c driver instead of board
SDRAM initialization.
For that, enable OF_CONTROL, OF_EMBED and STM32_SDRAM flags.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c
index 1c34a8e..7e8df8e 100644
--- a/board/st/stm32f429-discovery/stm32f429-discovery.c
+++ b/board/st/stm32f429-discovery/stm32f429-discovery.c
@@ -15,10 +15,8 @@
#include <dm.h>
#include <stm32_rcc.h>
#include <asm/io.h>
-#include <asm/armv7m.h>
#include <asm/arch/stm32.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/fmc.h>
#include <dm/platform_data/serial_stm32.h>
#include <asm/arch/stm32_periph.h>
#include <asm/arch/stm32_defs.h>
@@ -140,56 +138,10 @@
*/
#define STM32_RCC_ENR_FMC (1 << 0) /* FMC module clock */
-static inline u32 _ns2clk(u32 ns, u32 freq)
-{
- u32 tmp = freq/1000000;
- return (tmp * ns) / 1000;
-}
-
-#define NS2CLK(ns) (_ns2clk(ns, freq))
-
-/*
- * Following are timings for IS42S16400J, from corresponding datasheet
- */
-#define SDRAM_CAS 3 /* 3 cycles */
-#define SDRAM_NB 1 /* Number of banks */
-#define SDRAM_MWID 1 /* 16 bit memory */
-
-#define SDRAM_NR 0x1 /* 12-bit row */
-#define SDRAM_NC 0x0 /* 8-bit col */
-#define SDRAM_RBURST 0x1 /* Single read requests always as bursts */
-#define SDRAM_RPIPE 0x0 /* No HCLK clock cycle delay */
-
-#define SDRAM_TRRD (NS2CLK(14) - 1)
-#define SDRAM_TRCD (NS2CLK(15) - 1)
-#define SDRAM_TRP (NS2CLK(15) - 1)
-#define SDRAM_TRAS (NS2CLK(42) - 1)
-#define SDRAM_TRC (NS2CLK(63) - 1)
-#define SDRAM_TRFC (NS2CLK(63) - 1)
-#define SDRAM_TCDL (1 - 1)
-#define SDRAM_TRDL (2 - 1)
-#define SDRAM_TBDL (1 - 1)
-#define SDRAM_TREF 1386
-#define SDRAM_TCCD (1 - 1)
-
-#define SDRAM_TXSR (NS2CLK(70) - 1)/* Row cycle time after precharge */
-#define SDRAM_TMRD (3 - 1) /* Page 10, Mode Register Set */
-
-/* Last data-in to row precharge, need also comply ineq from RM 37.7.5 */
-#define SDRAM_TWR max(\
- (int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD - 1)), \
- (int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP - 2)\
-)
-
-#define SDRAM_MODE_BL_SHIFT 0
-#define SDRAM_MODE_CAS_SHIFT 4
-#define SDRAM_MODE_BL 0
-#define SDRAM_MODE_CAS SDRAM_CAS
-
int dram_init(void)
{
- u32 freq;
int rv;
+ struct udevice *dev;
rv = fmc_setup_gpio();
if (rv)
@@ -197,83 +149,23 @@
setbits_le32(&STM32_RCC->ahb3enr, STM32_RCC_ENR_FMC);
- /*
- * Get frequency for NS2CLK calculation.
- */
- freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
-
- writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
- | SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
- | SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
- &STM32_SDRAM_FMC->sdcr1);
-
- writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
- | SDRAM_CAS << FMC_SDCR_CAS_SHIFT
- | SDRAM_NB << FMC_SDCR_NB_SHIFT
- | SDRAM_MWID << FMC_SDCR_MWID_SHIFT
- | SDRAM_NR << FMC_SDCR_NR_SHIFT
- | SDRAM_NC << FMC_SDCR_NC_SHIFT
- | SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
- | SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
- &STM32_SDRAM_FMC->sdcr2);
-
- writel(SDRAM_TRP << FMC_SDTR_TRP_SHIFT
- | SDRAM_TRC << FMC_SDTR_TRC_SHIFT,
- &STM32_SDRAM_FMC->sdtr1);
-
- writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
- | SDRAM_TRP << FMC_SDTR_TRP_SHIFT
- | SDRAM_TWR << FMC_SDTR_TWR_SHIFT
- | SDRAM_TRC << FMC_SDTR_TRC_SHIFT
- | SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
- | SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
- | SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
- &STM32_SDRAM_FMC->sdtr2);
-
- writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_START_CLOCK,
- &STM32_SDRAM_FMC->sdcmr);
-
- udelay(200); /* 200 us delay, page 10, "Power-Up" */
- FMC_BUSY_WAIT();
-
- writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_PRECHARGE,
- &STM32_SDRAM_FMC->sdcmr);
-
- udelay(100);
- FMC_BUSY_WAIT();
-
- writel((FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_AUTOREFRESH
- | 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
-
- udelay(100);
- FMC_BUSY_WAIT();
-
- writel(FMC_SDCMR_BANK_2 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
- | SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
- << FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
- &STM32_SDRAM_FMC->sdcmr);
-
- udelay(100);
-
- FMC_BUSY_WAIT();
-
- writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_NORMAL,
- &STM32_SDRAM_FMC->sdcmr);
-
- FMC_BUSY_WAIT();
+ rv = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (rv) {
+ debug("DRAM init failed: %d\n", rv);
+ return rv;
+ }
- /* Refresh timer */
- writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
+ if (fdtdec_setup_memory_size() != 0)
+ rv = -EINVAL;
- /*
- * Fill in global info with description of SRAM configuration
- */
- gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
- gd->bd->bi_dram[0].size = CONFIG_SYS_RAM_SIZE;
+ return rv;
+}
- gd->ram_size = CONFIG_SYS_RAM_SIZE;
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
- return rv;
+ return 0;
}
static const struct stm32_serial_platdata serial_platdata = {