Clear up confusion over the CMD_POST and POST_DIAG mess.
For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
Clear this mess up some.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 00b656e..aec4d83 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -138,11 +138,8 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-# define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-# define CFG_CMD_POST_DIAG 0
#endif /* CONFIG_POST */
@@ -161,7 +158,6 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_BSP
@@ -192,6 +188,10 @@
#define CONFIG_CMD_PCI
#endif
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 612b661..2b2d15a 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -222,12 +222,6 @@
CFG_POST_UART | \
CFG_POST_SPR )
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
-
/*
* Command line configuration.
@@ -245,12 +239,14 @@
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_MII
#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_POST_DIAG
#if !defined(CONFIG_SC)
#define CONFIG_CMD_DOC
#endif
+#ifdef CONFIG_POST
+u #define CONFIG_CMD_DIAG
+#endif
/*
* There is no IDE/PCMCIA hardware support on the board.
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 2422201..2f05605 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -156,12 +156,6 @@
#define CONFIG_POST (CFG_POST_CPU | \
CFG_POST_RTC | \
CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
#endif
@@ -175,9 +169,11 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST_DIAG
#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
/*
* Miscellaneous configurable options
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 184338b..c59b70f 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -167,12 +167,6 @@
#define CONFIG_POST (CFG_POST_CPU | \
CFG_POST_RTC | \
CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
#endif
@@ -187,10 +181,12 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST_DIAG
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_USB
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
/*
* Miscellaneous configurable options
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index f64c522..3d90efb 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -82,11 +82,8 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
@@ -95,10 +92,6 @@
*/
#include <config_cmd_default.h>
-#ifdef CONFIG_VIDEO
-#define CONFIG_CMD_BMP
-#endif
-
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
@@ -112,12 +105,19 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_BSP
#define CONFIG_CMD_USB
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG__CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 24114b8..598c1c6 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -142,11 +142,8 @@
#endif
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
@@ -164,7 +161,6 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_BSP
@@ -188,6 +184,10 @@
#define CONFIG_CFG_FAT
#endif
+#ifdef CONFIG_POST
+ #define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
diff --git a/include/configs/aev.h b/include/configs/aev.h
index ecd84d3..93b20db 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -86,11 +86,8 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
@@ -109,10 +106,13 @@
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 36f55d1..bea157a 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -144,11 +144,8 @@
#endif
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
/* CF-CARD IDE-HDD Support */
@@ -197,7 +194,10 @@
#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_POST_DIAG
+
+#if defined(CONFIG_POST)
+#define CONFIG_CMD_DIAG
+#endif
#ifdef CONFIG_BF537_NAND
#define CONFIG_CMD_NAND
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 3dc7a8e..1db5e90 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -170,12 +170,6 @@
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
-
/*
* Command line configuration.
@@ -192,9 +186,12 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST
#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 8d09857..a965e8a 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -60,11 +60,8 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
@@ -82,10 +79,13 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_TIMESTAMP /* display image timestamps */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index e480df5..ccfcf1c 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -116,11 +116,8 @@
CFG_POST_I2C)
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
/* preserve space for the post_word at end of on-chip SRAM */
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
#endif
@@ -129,6 +126,18 @@
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
#define CONFIG_CMD_IDE
#define CONFIG_CMD_FAT
@@ -148,18 +157,9 @@
#define CONFIG_CMD_PCI
#endif
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
#define CONFIG_TIMESTAMP /* display image timestamps */
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 2bdc55b..d223c58 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -117,12 +117,6 @@
CFG_POST_SPR )
#undef CONFIG_POST
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
-
/*
* Command line configuration.
@@ -140,9 +134,12 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
#define CONFIG_NETCONSOLE