Blackfin: unify custom gpio commands
Now that we have a unified gpio layer, the misc partial gpio commands
can be unified and made complete (support all possible gpios).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile
index 3812ba1..bad018a 100644
--- a/board/tcm-bf537/Makefile
+++ b/board/tcm-bf537/Makefile
@@ -29,7 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o
+COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/tcm-bf537/flash.c b/board/tcm-bf537/flash.c
deleted file mode 100644
index 14055c6..0000000
--- a/board/tcm-bf537/flash.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * flash.c - helper commands for working with GPIO-assisted flash
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include "gpio_cfi_flash.h"
-
-int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong faddr = CONFIG_SYS_FLASH_BASE;
- ushort data;
- ulong dflg;
-
- if (argc == 3) {
- dflg = simple_strtoul(argv[1], NULL, 16);
- faddr |= (dflg << 21);
- dflg = simple_strtoul(argv[2], NULL, 16);
- faddr |= (dflg << 22);
- gpio_cfi_flash_swizzle((void *)faddr);
- } else {
- data = bfin_read_PORTFIO();
- printf("Port F data %04x (PF4:%i PF5:%i)\n", data,
- !!(data & PF4), !!(data & PF5));
- }
-
- return 0;
-}
-
-U_BOOT_CMD(pf, 3, 0, do_pf,
- "set/clear PF4/PF5 GPIO flash bank switch\n",
- "<pf4> <pf5> - set PF4/PF5 GPIO pin state\n");