| .. SPDX-License-Identifier: GPL-2.0+: |
| |
| cmp command |
| =========== |
| |
| Synopsis |
| -------- |
| |
| :: |
| |
| cmp [.b, .w, .l, .q] addr1 addr2 count |
| |
| Description |
| ----------- |
| |
| The cmp command is used to compare two memory areas. By default it works on |
| four byte tuples. By appending .b, .w, .l, .q the size of the tuples is |
| controlled: |
| |
| cmp.b |
| compare 1 byte tuples |
| |
| cmp.w |
| compare 2 byte tuples |
| |
| cmp.l |
| compare 4 byte tuples |
| |
| cmp.q |
| compare 8 byte tuples |
| |
| The parameters are used as follows: |
| |
| addr1 |
| Address of the first memory area. |
| |
| addr2 |
| Address of the second memory area. |
| |
| count |
| Number of bytes to compare (as hexadecimal number). |
| |
| Example |
| ------- |
| |
| In the example below the strings "Hello world\n" and "Hello World\n" are written |
| to memory and then compared. |
| |
| :: |
| |
| => mm.b 0x1000000 |
| 01000000: 00 ? 48 |
| 01000001: 00 ? 65 |
| 01000002: 00 ? 6c |
| 01000003: 00 ? 6c |
| 01000004: 00 ? 6f |
| 01000005: 00 ? 20 |
| 01000006: 00 ? 77 |
| 01000007: 00 ? 6f |
| 01000008: 00 ? 72 |
| 01000009: 00 ? 6c |
| 0100000a: 00 ? 64 |
| 0100000b: 00 ? 0d |
| 0100000c: 00 ? => <INTERRUPT> |
| => mm.b 0x101000 |
| 00101000: 00 ? 48 |
| 00101001: 00 ? 65 |
| 00101002: 00 ? 6c |
| 00101003: 00 ? 6c |
| 00101004: 00 ? 6f |
| 00101005: 00 ? 20 |
| 00101006: 00 ? 57 |
| 00101007: 00 ? 6f |
| 00101008: 00 ? 72 |
| 00101009: 00 ? 6c |
| 0010100a: 00 ? 64 |
| 0010100b: 00 ? 0d |
| 0010100c: 00 ? => <INTERRUPT> |
| => cmp 0x1000000 0x101000 0xc |
| word at 0x01000004 (0x6f77206f) != word at 0x00101004 (0x6f57206f) |
| Total of 1 word(s) were the same |
| => cmp.b 0x1000000 0x101000 0xc |
| byte at 0x01000006 (0x77) != byte at 0x00101006 (0x57) |
| Total of 6 byte(s) were the same |
| => cmp.w 0x1000000 0x101000 0xc |
| halfword at 0x01000006 (0x6f77) != halfword at 0x00101006 (0x6f57) |
| Total of 3 halfword(s) were the same |
| => cmp.l 0x1000000 0x101000 0xc |
| word at 0x01000004 (0x6f77206f) != word at 0x00101004 (0x6f57206f) |
| Total of 1 word(s) were the same |
| => cmp.q 0x1000000 0x101000 0xc |
| double word at 0x01000000 (0x6f77206f6c6c6548) != double word at 0x00101000 (0x6f57206f6c6c6548) |
| Total of 0 double word(s) were the same |
| |
| Configuration |
| ------------- |
| |
| The cmp command is only available if CONFIG_CMD_MEMORY=y. The cmp.q command is |
| only available if additionally CONFIG_MEM_SUPPORT_64BIT_DATA=y. |
| |
| Return value |
| ------------ |
| |
| The return value $? is true (0) if the compared memory areas are equal. |
| The reutrn value is false (1) if the compared memory areas differ. |