| .. SPDX-License-Identifier: GPL-2.0+: |
| |
| bootflow command |
| ================ |
| |
| Synopis |
| ------- |
| |
| :: |
| |
| bootflow scan [-abel] [bootdev] |
| bootflow list [-e] |
| bootflow select [<num|name>] |
| bootflow info [-d] |
| bootflow boot |
| |
| |
| Description |
| ----------- |
| |
| The `bootflow` command is used to manage bootflows. It can scan bootdevs to |
| locate bootflows, list them and boot them. |
| |
| See :doc:`../../develop/bootstd` for more information. |
| |
| |
| bootflow scan |
| ~~~~~~~~~~~~~ |
| |
| Scans for available bootflows, optionally booting the first valid one it finds. |
| This operates in two modes: |
| |
| - If no bootdev is selected (see `bootdev select`) it scans bootflows one |
| by one, extracting all the bootdevs from each |
| - If a bootdev is selected, it just scans that one bootflow |
| |
| Flags are: |
| |
| -a |
| Collect all bootflows, even those that cannot be loaded. Normally if a file |
| is not where it is expected, then the bootflow fails and so is dropped |
| during the scan. With this option you can see why each bootflow would be |
| dropped. |
| |
| -b |
| Boot each valid bootflow as it is scanned. Typically only the first bootflow |
| matters, since by then the system boots in the OS and U-Boot is no-longer |
| running. `bootflow scan -b` is a quick way to boot the first available OS. |
| A valid bootflow is one that made it all the way to the `loaded` state. |
| |
| -e |
| Used with -l to also show errors for each bootflow. The shows detailed error |
| information for each bootflow that failed to make it to the `loaded` state. |
| |
| -l |
| List bootflows while scanning. This is helpful when you want to see what |
| is happening during scanning. Use it with the `-b` flag to see which |
| bootdev and bootflows are being tried. |
| |
| The optional argument specifies a particular bootdev to scan. This can either be |
| the name of a bootdev or its sequence number (both shown with `bootdev list`). |
| Alternatively a convenience label can be used, like `mmc0`, which is the type of |
| device and an optional sequence number. Specifically, the label is the uclass of |
| the bootdev's parent followed by the sequence number of that parent. Sequence |
| numbers are typically set by aliases, so if you have 'mmc0' in your devicetree |
| alias section, then `mmc0` refers to the bootdev attached to that device. |
| |
| |
| bootflow list |
| ~~~~~~~~~~~~~ |
| |
| Lists the previously scanned bootflows. You must use `bootflow scan` before this |
| to see anything. |
| |
| If you scanned with -a and have bootflows with errors, -e can be used to show |
| those errors. |
| |
| The list looks something like this: |
| |
| === ====== ====== ======== ==== =============================== ================ |
| Seq Method State Uclass Part Name Filename |
| === ====== ====== ======== ==== =============================== ================ |
| 0 distro ready mmc 2 mmc\@7e202000.bootdev.part_2 /boot/extlinux/extlinux.conf |
| 1 pxe ready ethernet 0 smsc95xx_eth.bootdev.0 rpi.pxe/extlinux/extlinux.conf |
| === ====== ====== ======== ==== =============================== ================ |
| |
| The fields are as follows: |
| |
| Seq: |
| Sequence number in the scan, used to reference the bootflow later |
| |
| Method: |
| The boot method (bootmeth) used to find the bootflow. Several methods are |
| included in U-Boot. |
| |
| State: |
| Current state of the bootflow, indicating how far the bootdev got in |
| obtaining a valid one. See :ref:`BootflowStates` for a list of states. |
| |
| Uclass: |
| Name of the media device's Uclass. This indicates the type of the parent |
| device (e.g. MMC, Ethernet). |
| |
| Part: |
| Partition number being accesseed, numbered from 1. Normally a device will |
| have a partition table with a small number of partitions. For devices |
| without partition tables (e.g. network) this field is 0. |
| |
| Name: |
| Name of the bootflow. This is generated from the bootdev appended with |
| the partition information |
| |
| Filename: |
| Name of the bootflow file. This indicates where the file is on the |
| filesystem or network device. |
| |
| |
| bootflow select |
| ~~~~~~~~~~~~~~~ |
| |
| Use this to select a particular bootflow. You can select it by the sequence |
| number or name, as shown in `bootflow list`. |
| |
| Once a bootflow is selected, you can use `bootflow info` and `bootflow boot`. |
| |
| If no bootflow name or number is provided, then any existing bootflow is |
| unselected. |
| |
| |
| bootflow info |
| ~~~~~~~~~~~~~ |
| |
| This shows information on the current bootflow, with the format looking like |
| this: |
| |
| ========= =============================== |
| Name mmc\@7e202000.bootdev.part_2 |
| Device mmc\@7e202000.bootdev |
| Block dev mmc\@7e202000.blk |
| Type distro |
| Method: syslinux |
| State ready |
| Partition 2 |
| Subdir (none) |
| Filename /extlinux/extlinux.conf |
| Buffer 3db7ad48 |
| Size 232 (562 bytes) |
| Error 0 |
| ========= =============================== |
| |
| Most of the information is the same as `bootflow list` above. The new fields |
| are: |
| |
| Device |
| Name of the bootdev |
| |
| Block dev |
| Name of the block device, if any. Network devices don't have a block device. |
| |
| Subdir |
| Subdirectory used for retrieving files. For network bootdevs this is the |
| directory of the 'bootfile' parameter passed from DHCP. All file retrievals |
| when booting are relative to this. |
| |
| Buffer |
| Buffer containing the bootflow file. You can use the :doc:`md` to look at |
| it, or dump it with `bootflow info -d`. |
| |
| Size |
| Size of the bootflow file |
| |
| Error |
| Error number returned from scanning for the bootflow. This is 0 if the |
| bootflow is in the 'loaded' state, or a negative error value on error. You |
| can look up Linux error codes to find the meaning of the number. |
| |
| Use the `-d` flag to dump out the contents of the bootfile file. |
| |
| |
| bootflow boot |
| ~~~~~~~~~~~~~ |
| |
| This boots the current bootflow. |
| |
| |
| Example |
| ------- |
| |
| Here is an example of scanning for bootflows, then listing them:: |
| |
| U-Boot> bootflow scan -l |
| Scanning for bootflows in all bootdevs |
| Seq Type State Uclass Part Name Filename |
| --- ----------- ------ -------- ---- ------------------------ ---------------- |
| Scanning bootdev 'mmc@7e202000.bootdev': |
| 0 distro ready mmc 2 mmc@7e202000.bootdev.p /extlinux/extlinux.conf |
| Scanning bootdev 'sdhci@7e300000.bootdev': |
| Card did not respond to voltage select! : -110 |
| Scanning bootdev 'smsc95xx_eth.bootdev': |
| Waiting for Ethernet connection... done. |
| BOOTP broadcast 1 |
| DHCP client bound to address 192.168.4.30 (4 ms) |
| Using smsc95xx_eth device |
| TFTP from server 192.168.4.1; our IP address is 192.168.4.30 |
| Filename 'rpi.pxe/'. |
| Load address: 0x200000 |
| Loading: * |
| TFTP error: 'Is a directory' (0) |
| Starting again |
| |
| missing environment variable: pxeuuid |
| Retrieving file: rpi.pxe/pxelinux.cfg/01-b8-27-eb-a6-61-e1 |
| Waiting for Ethernet connection... done. |
| Using smsc95xx_eth device |
| TFTP from server 192.168.4.1; our IP address is 192.168.4.30 |
| Filename 'rpi.pxe/pxelinux.cfg/01-b8-27-eb-a6-61-e1'. |
| Load address: 0x2500000 |
| Loading: ################################################## 566 Bytes |
| 45.9 KiB/s |
| done |
| Bytes transferred = 566 (236 hex) |
| 1 distro ready ethernet 0 smsc95xx_eth.bootdev.0 rpi.pxe/extlinux/extlinux.conf |
| No more bootdevs |
| --- ----------- ------ -------- ---- ------------------------ ---------------- |
| (2 bootflows, 2 valid) |
| U-Boot> bootflow l |
| Showing all bootflows |
| Seq Type State Uclass Part Name Filename |
| --- ----------- ------ -------- ---- ------------------------ ---------------- |
| 0 distro ready mmc 2 mmc@7e202000.bootdev.p /extlinux/extlinux.conf |
| 1 pxe ready ethernet 0 smsc95xx_eth.bootdev.0 rpi.pxe/extlinux/extlinux.conf |
| --- ----------- ------ -------- ---- ------------------------ ---------------- |
| (2 bootflows, 2 valid) |
| |
| |
| The second one is then selected by name (we could instead use `bootflow sel 0`), |
| displayed and booted:: |
| |
| U-Boot> bootflow info |
| No bootflow selected |
| U-Boot> bootflow sel mmc@7e202000.bootdev.part_2 |
| U-Boot> bootflow info |
| Name: mmc@7e202000.bootdev.part_2 |
| Device: mmc@7e202000.bootdev |
| Block dev: mmc@7e202000.blk |
| Sequence: 1 |
| Method: distro |
| State: ready |
| Partition: 2 |
| Subdir: (none) |
| Filename: extlinux/extlinux.conf |
| Buffer: 3db7ae88 |
| Size: 232 (562 bytes) |
| Error: 0 |
| U-Boot> bootflow boot |
| ** Booting bootflow 'smsc95xx_eth.bootdev.0' |
| Ignoring unknown command: ui |
| Ignoring malformed menu command: autoboot |
| Ignoring malformed menu command: hidden |
| Ignoring unknown command: totaltimeout |
| 1: Fedora-Workstation-armhfp-31-1.9 (5.3.7-301.fc31.armv7hl) |
| Retrieving file: rpi.pxe/initramfs-5.3.7-301.fc31.armv7hl.img |
| get 2700000 rpi.pxe/initramfs-5.3.7-301.fc31.armv7hl.img |
| Waiting for Ethernet connection... done. |
| Using smsc95xx_eth device |
| TFTP from server 192.168.4.1; our IP address is 192.168.4.30 |
| Filename 'rpi.pxe/initramfs-5.3.7-301.fc31.armv7hl.img'. |
| Load address: 0x2700000 |
| Loading: ###################################T ############### 57.7 MiB |
| 1.9 MiB/s |
| done |
| Bytes transferred = 60498594 (39b22a2 hex) |
| Retrieving file: rpi.pxe//vmlinuz-5.3.7-301.fc31.armv7hl |
| get 80000 rpi.pxe//vmlinuz-5.3.7-301.fc31.armv7hl |
| Waiting for Ethernet connection... done. |
| Using smsc95xx_eth device |
| TFTP from server 192.168.4.1; our IP address is 192.168.4.30 |
| Filename 'rpi.pxe//vmlinuz-5.3.7-301.fc31.armv7hl'. |
| Load address: 0x80000 |
| Loading: ################################################## 7.2 MiB |
| 2.3 MiB/s |
| done |
| Bytes transferred = 7508480 (729200 hex) |
| append: ro root=UUID=9732b35b-4cd5-458b-9b91-80f7047e0b8a rhgb quiet LANG=en_US.UTF-8 cma=192MB cma=256MB |
| Retrieving file: rpi.pxe//dtb-5.3.7-301.fc31.armv7hl/bcm2837-rpi-3-b.dtb |
| get 2600000 rpi.pxe//dtb-5.3.7-301.fc31.armv7hl/bcm2837-rpi-3-b.dtb |
| Waiting for Ethernet connection... done. |
| Using smsc95xx_eth device |
| TFTP from server 192.168.4.1; our IP address is 192.168.4.30 |
| Filename 'rpi.pxe//dtb-5.3.7-301.fc31.armv7hl/bcm2837-rpi-3-b.dtb'. |
| Load address: 0x2600000 |
| Loading: ################################################## 13.8 KiB |
| 764.6 KiB/s |
| done |
| Bytes transferred = 14102 (3716 hex) |
| Kernel image @ 0x080000 [ 0x000000 - 0x729200 ] |
| ## Flattened Device Tree blob at 02600000 |
| Booting using the fdt blob at 0x2600000 |
| Using Device Tree in place at 02600000, end 02606715 |
| |
| Starting kernel ... |
| |
| [ OK ] Started Show Plymouth Boot Screen. |
| [ OK ] Started Forward Password R…s to Plymouth Directory Watch. |
| [ OK ] Reached target Local Encrypted Volumes. |
| [ OK ] Reached target Paths. |
| .... |
| |
| |
| Here we scan for bootflows and boot the first one found:: |
| |
| U-Boot> bootflow scan -bl |
| Scanning for bootflows in all bootdevs |
| Seq Method State Uclass Part Name Filename |
| --- ----------- ------ -------- ---- ---------------------- ---------------- |
| Scanning bootdev 'mmc@7e202000.bootdev': |
| 0 distro ready mmc 2 mmc@7e202000.bootdev.p /extlinux/extlinux.conf |
| ** Booting bootflow 'mmc@7e202000.bootdev.part_2' |
| Ignoring unknown command: ui |
| Ignoring malformed menu command: autoboot |
| Ignoring malformed menu command: hidden |
| Ignoring unknown command: totaltimeout |
| 1: Fedora-KDE-armhfp-31-1.9 (5.3.7-301.fc31.armv7hl) |
| Retrieving file: /initramfs-5.3.7-301.fc31.armv7hl.img |
| getfile 2700000 /initramfs-5.3.7-301.fc31.armv7hl.img |
| Retrieving file: /vmlinuz-5.3.7-301.fc31.armv7hl |
| getfile 80000 /vmlinuz-5.3.7-301.fc31.armv7hl |
| append: ro root=UUID=b8781f09-e2dd-4cb8-979b-7df5eeaaabea rhgb LANG=en_US.UTF-8 cma=192MB console=tty0 console=ttyS1,115200 |
| Retrieving file: /dtb-5.3.7-301.fc31.armv7hl/bcm2837-rpi-3-b.dtb |
| getfile 2600000 /dtb-5.3.7-301.fc31.armv7hl/bcm2837-rpi-3-b.dtb |
| Kernel image @ 0x080000 [ 0x000000 - 0x729200 ] |
| ## Flattened Device Tree blob at 02600000 |
| Booting using the fdt blob at 0x2600000 |
| Using Device Tree in place at 02600000, end 02606715 |
| |
| Starting kernel ... |
| |
| [ 0.000000] Booting Linux on physical CPU 0x0 |
| |
| |
| Here is am example using the -e flag to see all errors:: |
| |
| U-Boot> bootflow scan -a |
| Card did not respond to voltage select! : -110 |
| Waiting for Ethernet connection... done. |
| BOOTP broadcast 1 |
| DHCP client bound to address 192.168.4.30 (4 ms) |
| Using smsc95xx_eth device |
| TFTP from server 192.168.4.1; our IP address is 192.168.4.30 |
| Filename 'rpi.pxe/'. |
| Load address: 0x200000 |
| Loading: * |
| TFTP error: 'Is a directory' (0) |
| Starting again |
| |
| missing environment variable: pxeuuid |
| Retrieving file: rpi.pxe/pxelinux.cfg/01-b8-27-eb-a6-61-e1 |
| Waiting for Ethernet connection... done. |
| Using smsc95xx_eth device |
| TFTP from server 192.168.4.1; our IP address is 192.168.4.30 |
| Filename 'rpi.pxe/pxelinux.cfg/01-b8-27-eb-a6-61-e1'. |
| Load address: 0x2500000 |
| Loading: ################################################## 566 Bytes |
| 49.8 KiB/s |
| done |
| Bytes transferred = 566 (236 hex) |
| U-Boot> bootflow l -e |
| Showing all bootflows |
| Seq Type State Uclass Part Name Filename |
| --- ----------- ------ -------- ---- --------------------- ---------------- |
| 0 distro fs mmc 1 mmc@7e202000.bootdev.p /extlinux/extlinux.conf |
| ** File not found, err=-2 |
| 1 distro ready mmc 2 mmc@7e202000.bootdev.p /extlinux/extlinux.conf |
| 2 distro fs mmc 3 mmc@7e202000.bootdev.p /extlinux/extlinux.conf |
| ** File not found, err=-1 |
| 3 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 4 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 5 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 6 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 7 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 8 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 9 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| a distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| b distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| c distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| d distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| e distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| f distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 10 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 11 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 12 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 13 distro media mmc 0 mmc@7e202000.bootdev.p <NULL> |
| ** No partition found, err=-2 |
| 14 distro ready ethernet 0 smsc95xx_eth.bootdev.0 rpi.pxe/extlinux/extlinux.conf |
| --- ----------- ------ -------- ---- --------------------- ---------------- |
| (21 bootflows, 2 valid) |
| U-Boot> |
| |
| |
| Return value |
| ------------ |
| |
| On success `bootflow boot` normally boots into the Operating System and does not |
| return to U-Boot. If something about the U-Boot processing fails, then the |
| return value $? is 1. If the boot succeeds but for some reason the Operating |
| System returns, then $? is 0, indicating success. |
| |
| For other subcommands, the return value $? is always 0 (true). |
| |
| |
| .. BootflowStates_: |