usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and
make all UDC controllers select USB_GADGET_DUALSPEED:
- add next options to Kconfig selecting USB_GADGET_DUALSPEED:
- USB_GADGET_ATMEL_USBA
- USB_GADGET_DWC2_OTG
- USB_DWC3
- CI_UDC
- make USB_MUSB_GADGET select USB_GADGET_DUALSPEED
While at it, make some related fixes:
- remove DUALSPEED from configs that don't enable gadget support:
- kwb.h
- tseries.h
- add missing USB_GADGET option to next configs:
- novena_defconfig
- pcm051_rev*_defconfig
- xfi3_defconfig
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index cfd8ce8..5838d6e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -36,6 +36,29 @@
if USB_GADGET
+config USB_GADGET_ATMEL_USBA
+ bool "Atmel USBA"
+ select USB_GADGET_DUALSPEED
+ help
+ USBA is the integrated high-speed USB Device controller on
+ the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
+
+config USB_GADGET_DWC2_OTG
+ bool "DesignWare USB2.0 HS OTG controller (gadget mode)"
+ select USB_GADGET_DUALSPEED
+ help
+ The Designware USB2.0 high-speed gadget controller
+ integrated into many SoCs. Select this option if you want the
+ driver to operate in Peripheral mode. This option requires
+ USB_GADGET to be enabled.
+
+config CI_UDC
+ bool "ChipIdea device controller"
+ select USB_GADGET_DUALSPEED
+ help
+ Say Y here to enable device controller functionality of the
+ ChipIdea driver.
+
config USB_GADGET_VBUS_DRAW
int "Maximum VBUS Power usage (2-500 mA)"
range 2 500
@@ -53,4 +76,8 @@
This value will be used except for system-specific gadget
drivers that have more specific information.
+# Selected by UDC drivers that support high-speed operation.
+config USB_GADGET_DUALSPEED
+ bool
+
endif # USB_GADGET