diff --git a/board/schneider/hmibsc/hmibsc.env b/board/schneider/hmibsc/hmibsc.env
new file mode 100644
index 0000000..da3d892
--- /dev/null
+++ b/board/schneider/hmibsc/hmibsc.env
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+loadaddr=0x90000000
+bootcmd=
+	echo "Booting RAUC A/B system";
+	setenv devtype mmc; setenv devnum 0;
+	test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B";
+	test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3;
+	test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3;
+	setenv raucslot;
+	for BOOT_SLOT in "${BOOT_ORDER}"; do
+		if test "x${raucslot}" != "x"; then
+			echo "skip remaining slots...";
+		elif test "x${BOOT_SLOT}" = "xA"; then
+			if test ${BOOT_A_LEFT} -gt 0; then
+				setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1;
+				echo "Found valid RAUC slot A";
+				setenv raucslot "rauc.slot=A";
+				setenv raucpart A; setenv distro_bootpart 6;
+			fi;
+		elif test "x${BOOT_SLOT}" = "xB"; then
+			if test ${BOOT_B_LEFT} -gt 0; then
+				setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1;
+				echo "Found valid RAUC slot B";
+				setenv raucslot "rauc.slot=B";
+				setenv raucpart B; setenv distro_bootpart 7;
+			fi;
+		fi;
+	done;
+	if test -n "${raucslot}"; then
+		setenv bootargs console=ttyMSM1 root=PARTLABEL=rootfs_${raucpart} rw rootwait ${raucslot};
+		saveenv;
+	else
+		echo "No valid RAUC slot found. Resetting tries to 3";
+		setenv BOOT_A_LEFT 3;
+		setenv BOOT_B_LEFT 3;
+		saveenv;
+		reset;
+	fi;
+	load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} /boot/fitImage && bootm;