pico-imx7d: Convert to DM_I2C and DM_PMIC
The conversion to DM_I2C is mandatory, so convert to it
and also to DM_PMIC.
Signed-off-by: Fabio Estevam <festevam@denx.de>
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
index 7db34ab..6e98b85 100644
--- a/board/technexion/pico-imx7d/pico-imx7d.c
+++ b/board/technexion/pico-imx7d/pico-imx7d.c
@@ -13,10 +13,8 @@
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/mxc_i2c.h>
#include <asm/io.h>
#include <common.h>
-#include <i2c.h>
#include <miiphy.h>
#include <power/pmic.h>
#include <power/pfuze3000_pmic.h>
@@ -27,27 +25,6 @@
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
-#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
- PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
-
-#ifdef CONFIG_SYS_I2C_MXC
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-/* I2C4 for PMIC */
-static struct i2c_pads_info i2c_pad_info4 = {
- .scl = {
- .i2c_mode = MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL | PC,
- .gpio_mode = MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 | PC,
- .gp = IMX_GPIO_NR(6, 16),
- },
- .sda = {
- .i2c_mode = MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA | PC,
- .gpio_mode = MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 | PC,
- .gp = IMX_GPIO_NR(6, 17),
- },
-};
-#endif
-
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@@ -60,50 +37,43 @@
return 0;
}
-#if CONFIG_IS_ENABLED(POWER_LEGACY)
-#define I2C_PMIC 3
+#if CONFIG_IS_ENABLED(DM_PMIC)
int power_init_board(void)
{
- struct pmic *p;
+ struct udevice *dev;
+ int reg, rev_id;
int ret;
- unsigned int reg, rev_id;
- ret = power_pfuze3000_init(I2C_PMIC);
- if (ret)
- return ret;
-
- p = pmic_get("PFUZE3000");
- ret = pmic_probe(p);
- if (ret) {
- printf("Warning: Cannot find PMIC PFUZE3000\n");
- printf("\tPower consumption is not optimized.\n");
+ ret = pmic_get("pfuze3000@8", &dev);
+ if (ret == -ENODEV)
return 0;
- }
+ if (ret != 0)
+ return ret;
- pmic_reg_read(p, PFUZE3000_DEVICEID, ®);
- pmic_reg_read(p, PFUZE3000_REVID, &rev_id);
- printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+ reg = pmic_reg_read(dev, PFUZE3000_DEVICEID);
+ rev_id = pmic_reg_read(dev, PFUZE3000_REVID);
+ printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
/* disable Low Power Mode during standby mode */
- pmic_reg_read(p, PFUZE3000_LDOGCTL, ®);
+ reg = pmic_reg_read(dev, PFUZE3000_LDOGCTL);
reg |= 0x1;
- pmic_reg_write(p, PFUZE3000_LDOGCTL, reg);
+ pmic_reg_write(dev, PFUZE3000_LDOGCTL, reg);
/* SW1A/1B mode set to APS/APS */
reg = 0x8;
- pmic_reg_write(p, PFUZE3000_SW1AMODE, reg);
- pmic_reg_write(p, PFUZE3000_SW1BMODE, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1AMODE, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1BMODE, reg);
/* SW1A/1B standby voltage set to 1.025V */
reg = 0xd;
- pmic_reg_write(p, PFUZE3000_SW1ASTBY, reg);
- pmic_reg_write(p, PFUZE3000_SW1BSTBY, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1ASTBY, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1BSTBY, reg);
/* decrease SW1B normal voltage to 0.975V */
- pmic_reg_read(p, PFUZE3000_SW1BVOLT, ®);
+ reg = pmic_reg_read(dev, PFUZE3000_SW1BVOLT);
reg &= ~0x1f;
reg |= PFUZE3000_SW1AB_SETP(975);
- pmic_reg_write(p, PFUZE3000_SW1BVOLT, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1BVOLT, reg);
return 0;
}
@@ -168,10 +138,6 @@
{
setup_iomux_uart();
-#ifdef CONFIG_SYS_I2C_MXC
- setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4);
-#endif
-
return 0;
}
diff --git a/configs/pico-dwarf-imx7d_defconfig b/configs/pico-dwarf-imx7d_defconfig
index 2d84e0b..13e8d0c 100644
--- a/configs/pico-dwarf-imx7d_defconfig
+++ b/configs/pico-dwarf-imx7d_defconfig
@@ -7,10 +7,6 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_TARGET_PICO_IMX7D=y
@@ -30,7 +26,6 @@
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
@@ -66,8 +61,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
@@ -80,9 +74,9 @@
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
-CONFIG_POWER_LEGACY=y
CONFIG_POWER_PFUZE3000=y
-CONFIG_POWER_I2C=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig
index 143e7d0..63c168e 100644
--- a/configs/pico-hobbit-imx7d_defconfig
+++ b/configs/pico-hobbit-imx7d_defconfig
@@ -7,10 +7,6 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_TARGET_PICO_IMX7D=y
@@ -30,7 +26,6 @@
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
@@ -66,8 +61,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
@@ -79,8 +73,8 @@
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX7=y
-CONFIG_POWER_LEGACY=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
CONFIG_POWER_PFUZE3000=y
CONFIG_POWER_I2C=y
CONFIG_DM_SERIAL=y
diff --git a/configs/pico-imx7d_bl33_defconfig b/configs/pico-imx7d_bl33_defconfig
index 2dcbb43..bfe0149 100644
--- a/configs/pico-imx7d_bl33_defconfig
+++ b/configs/pico-imx7d_bl33_defconfig
@@ -6,10 +6,6 @@
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_TARGET_PICO_IMX7D=y
@@ -31,7 +27,6 @@
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
@@ -63,8 +58,7 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_DFU_MMC=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
@@ -75,8 +69,8 @@
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX7=y
-CONFIG_POWER_LEGACY=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
CONFIG_POWER_PFUZE3000=y
CONFIG_POWER_I2C=y
CONFIG_CONS_INDEX=4
diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig
index 1a818ef..a4367db 100644
--- a/configs/pico-imx7d_defconfig
+++ b/configs/pico-imx7d_defconfig
@@ -7,10 +7,6 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_TARGET_PICO_IMX7D=y
@@ -30,7 +26,6 @@
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
@@ -66,8 +61,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
@@ -80,9 +74,9 @@
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
-CONFIG_POWER_LEGACY=y
CONFIG_POWER_PFUZE3000=y
-CONFIG_POWER_I2C=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
diff --git a/configs/pico-nymph-imx7d_defconfig b/configs/pico-nymph-imx7d_defconfig
index 2d84e0b..13e8d0c 100644
--- a/configs/pico-nymph-imx7d_defconfig
+++ b/configs/pico-nymph-imx7d_defconfig
@@ -7,10 +7,6 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_TARGET_PICO_IMX7D=y
@@ -30,7 +26,6 @@
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
@@ -66,8 +61,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
@@ -80,9 +74,9 @@
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
-CONFIG_POWER_LEGACY=y
CONFIG_POWER_PFUZE3000=y
-CONFIG_POWER_I2C=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig
index 5709fcf..4f07e53 100644
--- a/configs/pico-pi-imx7d_defconfig
+++ b/configs/pico-pi-imx7d_defconfig
@@ -7,10 +7,6 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_TARGET_PICO_IMX7D=y
@@ -30,7 +26,6 @@
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_MAX_SIZE=0x100000
CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
@@ -66,8 +61,7 @@
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
@@ -80,9 +74,9 @@
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
-CONFIG_POWER_LEGACY=y
CONFIG_POWER_PFUZE3000=y
-CONFIG_POWER_I2C=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 5774184..096e5bb 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -97,9 +97,6 @@
#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
-/* PMIC */
-#define CFG_POWER_PFUZE3000_I2C_ADDR 0x08
-
/* FLASH and environment organization */
/* Environment starts at 768k = 768 * 1024 = 786432 */