commit b2a47529cda019ecb709dea5ce4c8c401305b67a
author Ben Gardiner <bengardiner@nanometrics.ca> Mon Jan 16 07:43:15 2012 +0000
committer Albert ARIBAUD <albert.u.boot@aribaud.net> Sun Feb 12 10:11:22 2012 +0100
tree 41263d71b1480d01b453bde62b749650909c3a6d
parent 410012ff0b1d09c14ebb58c9d7ed4563a277ef24

arm, davinci: add PLL0 prediv to da850 lowlevel setup

The OMAP-L138 has a pre-divider available on PLL0.

Add support to da850_lowlevel.c for configuring PLL0's pre-divider. This is
to achieve certain OPP's -- e.g. the 372MHz OPP used also by Linux.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: Christian Riesch <christian.riesch@omicron.at>
CC: Heiko Schocher <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Christian Riesch <christian.riesch@omicron.at>

arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c

diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index a532f8a..eec06bc 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -85,6 +85,13 @@
 	/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
 	clrbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
 
+#if defined(CONFIG_SYS_DA850_PLL0_PREDIV)
+	/* program the prediv */
+	if (reg == davinci_pllc0_regs && CONFIG_SYS_DA850_PLL0_PREDIV)
+		writel((PLL_DIVEN | CONFIG_SYS_DA850_PLL0_PREDIV),
+			&reg->prediv);
+#endif
+
 	/* Program the required multiplier value in PLLM */
 	writel(pllmult, &reg->pllm);