usb: Add Cadence USB3 host and gadget driver
Add support for USB3 host and gadget driver. This is a direct sync of
Linux kernel Cadence USB stack that from v5.4-rc1 release.
Driver has been modified so that it compiles without errors against
U-Boot code base.
Features not required for U-Boot such as scatter-gather DMA and OTG
interrupt handling has been dropped.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[jjhiblot@ti.com: Add PHY support]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
new file mode 100644
index 0000000..13eb489
--- /dev/null
+++ b/drivers/usb/cdns3/drd.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ * Roger Quadros <rogerq@ti.com>
+ *
+ *
+ */
+#include <dm.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/usb/otg.h>
+
+#include "gadget.h"
+#include "drd.h"
+#include "core.h"
+
+#define readl_poll_timeout_atomic readl_poll_timeout
+#define usleep_range(a, b) udelay((b))
+/**
+ * cdns3_set_mode - change mode of OTG Core
+ * @cdns: pointer to context structure
+ * @mode: selected mode from cdns_role
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode)
+{
+ int ret = 0;
+ u32 reg;
+
+ switch (mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ break;
+ case USB_DR_MODE_HOST:
+ break;
+ case USB_DR_MODE_OTG:
+ dev_dbg(cdns->dev, "Set controller to OTG mode\n");
+ if (cdns->version == CDNS3_CONTROLLER_V1) {
+ reg = readl(&cdns->otg_v1_regs->override);
+ reg |= OVERRIDE_IDPULLUP;
+ writel(reg, &cdns->otg_v1_regs->override);
+ } else {
+ reg = readl(&cdns->otg_v0_regs->ctrl1);
+ reg |= OVERRIDE_IDPULLUP_V0;
+ writel(reg, &cdns->otg_v0_regs->ctrl1);
+ }
+
+ /*
+ * Hardware specification says: "ID_VALUE must be valid within
+ * 50ms after idpullup is set to '1" so driver must wait
+ * 50ms before reading this pin.
+ */
+ usleep_range(50000, 60000);
+ break;
+ default:
+ dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+int cdns3_get_id(struct cdns3 *cdns)
+{
+ int id;
+
+ id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
+ dev_dbg(cdns->dev, "OTG ID: %d", id);
+
+ return id;
+}
+
+int cdns3_get_vbus(struct cdns3 *cdns)
+{
+ int vbus;
+
+ vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID);
+ dev_dbg(cdns->dev, "OTG VBUS: %d", vbus);
+
+ return vbus;
+}
+
+int cdns3_is_host(struct cdns3 *cdns)
+{
+ if (cdns->dr_mode == USB_DR_MODE_HOST)
+ return 1;
+ else if (!cdns3_get_id(cdns))
+ return 1;
+
+ return 0;
+}
+
+int cdns3_is_device(struct cdns3 *cdns)
+{
+ if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL)
+ return 1;
+ else if (cdns->dr_mode == USB_DR_MODE_OTG)
+ if (cdns3_get_id(cdns))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * cdns3_drd_switch_host - start/stop host
+ * @cdns: Pointer to controller context structure
+ * @on: 1 for start, 0 for stop
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_drd_switch_host(struct cdns3 *cdns, int on)
+{
+ int ret, val;
+ u32 reg = OTGCMD_OTG_DIS;
+
+ /* switch OTG core */
+ if (on) {
+ writel(OTGCMD_HOST_BUS_REQ | reg, &cdns->otg_regs->cmd);
+
+ dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n");
+ ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+ val & OTGSTS_XHCI_READY,
+ 100000);
+ if (ret) {
+ dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
+ return ret;
+ }
+ } else {
+ writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+ OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+ &cdns->otg_regs->cmd);
+ /* Waiting till H_IDLE state.*/
+ readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+ !(val & OTGSTATE_HOST_STATE_MASK),
+ 2000000);
+ }
+
+ return 0;
+}
+
+/**
+ * cdns3_drd_switch_gadget - start/stop gadget
+ * @cdns: Pointer to controller context structure
+ * @on: 1 for start, 0 for stop
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on)
+{
+ int ret, val;
+ u32 reg = OTGCMD_OTG_DIS;
+
+ /* switch OTG core */
+ if (on) {
+ writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
+
+ dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n");
+
+ ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+ val & OTGSTS_DEV_READY,
+ 100000);
+ if (ret) {
+ dev_err(cdns->dev, "timeout waiting for dev_ready\n");
+ return ret;
+ }
+ } else {
+ /*
+ * driver should wait at least 10us after disabling Device
+ * before turning-off Device (DEV_BUS_DROP)
+ */
+ usleep_range(20, 30);
+ writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+ OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+ &cdns->otg_regs->cmd);
+ /* Waiting till DEV_IDLE state.*/
+ readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+ !(val & OTGSTATE_DEV_STATE_MASK),
+ 2000000);
+ }
+
+ return 0;
+}
+
+/**
+ * cdns3_init_otg_mode - initialize drd controller
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_init_otg_mode(struct cdns3 *cdns)
+{
+ int ret = 0;
+
+ /* clear all interrupts */
+ writel(~0, &cdns->otg_regs->ivect);
+
+ ret = cdns3_set_mode(cdns, USB_DR_MODE_OTG);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
+/**
+ * cdns3_drd_update_mode - initialize mode of operation
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_drd_update_mode(struct cdns3 *cdns)
+{
+ int ret = 0;
+
+ switch (cdns->dr_mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ ret = cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
+ break;
+ case USB_DR_MODE_HOST:
+ ret = cdns3_set_mode(cdns, USB_DR_MODE_HOST);
+ break;
+ case USB_DR_MODE_OTG:
+ ret = cdns3_init_otg_mode(cdns);
+ break;
+ default:
+ dev_err(cdns->dev, "Unsupported mode of operation %d\n",
+ cdns->dr_mode);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+int cdns3_drd_init(struct cdns3 *cdns)
+{
+ void __iomem *regs;
+ int ret = 0;
+ u32 state;
+
+ regs = dev_remap_addr_name(cdns->dev, "otg");
+ if (!regs)
+ return -EINVAL;
+
+ /* Detection of DRD version. Controller has been released
+ * in two versions. Both are similar, but they have same changes
+ * in register maps.
+ * The first register in old version is command register and it's read
+ * only, so driver should read 0 from it. On the other hand, in v1
+ * the first register contains device ID number which is not set to 0.
+ * Driver uses this fact to detect the proper version of
+ * controller.
+ */
+ cdns->otg_v0_regs = regs;
+ if (!readl(&cdns->otg_v0_regs->cmd)) {
+ cdns->version = CDNS3_CONTROLLER_V0;
+ cdns->otg_v1_regs = NULL;
+ cdns->otg_regs = regs;
+ writel(1, &cdns->otg_v0_regs->simulate);
+ dev_info(cdns->dev, "DRD version v0 (%08x)\n",
+ readl(&cdns->otg_v0_regs->version));
+ } else {
+ cdns->otg_v0_regs = NULL;
+ cdns->otg_v1_regs = regs;
+ cdns->otg_regs = (void *)&cdns->otg_v1_regs->cmd;
+ cdns->version = CDNS3_CONTROLLER_V1;
+ writel(1, &cdns->otg_v1_regs->simulate);
+ dev_info(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
+ readl(&cdns->otg_v1_regs->did),
+ readl(&cdns->otg_v1_regs->rid));
+ }
+
+ state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts));
+
+ /* Update dr_mode according to STRAP configuration. */
+ cdns->dr_mode = USB_DR_MODE_OTG;
+ if (state == OTGSTS_STRAP_HOST) {
+ dev_dbg(cdns->dev, "Controller strapped to HOST\n");
+ cdns->dr_mode = USB_DR_MODE_HOST;
+ } else if (state == OTGSTS_STRAP_GADGET) {
+ dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n");
+ cdns->dr_mode = USB_DR_MODE_PERIPHERAL;
+ }
+
+ state = readl(&cdns->otg_regs->sts);
+ if (OTGSTS_OTG_NRDY(state) != 0) {
+ dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n");
+ return -ENODEV;
+ }
+
+ return ret;
+}
+
+int cdns3_drd_exit(struct cdns3 *cdns)
+{
+ return 0;
+}