armv8/ls2085ardb: Add eth & phy firmware loading support
Add support for board eth initialization and support for loading phy
firmware. PHY firmware needs to be loaded from board_eth_init() because
all the MACs are not initialized by ldpaa_eth driver.
Signed-off-by: pankaj chauhan <pankaj.chauhan at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/board/freescale/ls2085ardb/Makefile b/board/freescale/ls2085ardb/Makefile
index 0bfe21c..de383cc 100644
--- a/board/freescale/ls2085ardb/Makefile
+++ b/board/freescale/ls2085ardb/Makefile
@@ -4,5 +4,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += ls2085ardb.o
+obj-y += ls2085ardb.o eth_ls2085rdb.o
obj-y += ddr.o
diff --git a/board/freescale/ls2085ardb/eth_ls2085rdb.c b/board/freescale/ls2085ardb/eth_ls2085rdb.c
new file mode 100644
index 0000000..60af079
--- /dev/null
+++ b/board/freescale/ls2085ardb/eth_ls2085rdb.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch-fsl-lsch3/immap_lsch3.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+int load_firmware_cortina(struct phy_device *phy_dev)
+{
+ if (phy_dev->drv->config)
+ return phy_dev->drv->config(phy_dev);
+
+ return 0;
+}
+
+void load_phy_firmware(void)
+{
+ int i;
+ u8 phy_addr;
+ struct phy_device *phy_dev;
+ struct mii_dev *dev;
+ phy_interface_t interface;
+
+ /*Initialize and upload firmware for all the PHYs*/
+ for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC8; i++) {
+ interface = wriop_get_enet_if(i);
+ if (interface == PHY_INTERFACE_MODE_XGMII) {
+ dev = wriop_get_mdio(i);
+ phy_addr = wriop_get_phy_address(i);
+ phy_dev = phy_find_by_mask(dev, 1 << phy_addr,
+ interface);
+ if (!phy_dev) {
+ printf("No phydev for phyaddr %d\n", phy_addr);
+ continue;
+ }
+
+ /*Flash firmware for All CS4340 PHYS */
+ if (phy_dev->phy_id == PHY_UID_CS4340)
+ load_firmware_cortina(phy_dev);
+ }
+ }
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+ int i, interface;
+ struct memac_mdio_info mdio_info;
+ struct mii_dev *dev;
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 srds_s1;
+ struct memac_mdio_controller *reg;
+
+ srds_s1 = in_le32(&gur->rcwsr[28]) &
+ FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
+ srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+
+ reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
+ mdio_info.regs = reg;
+ mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
+
+ /* Register the EMI 1 */
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
+ mdio_info.regs = reg;
+ mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
+
+ /* Register the EMI 2 */
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ switch (srds_s1) {
+ case 0x2A:
+ wriop_set_phy_address(WRIOP1_DPMAC1, CORTINA_PHY_ADDR1);
+ wriop_set_phy_address(WRIOP1_DPMAC2, CORTINA_PHY_ADDR2);
+ wriop_set_phy_address(WRIOP1_DPMAC3, CORTINA_PHY_ADDR3);
+ wriop_set_phy_address(WRIOP1_DPMAC4, CORTINA_PHY_ADDR4);
+ wriop_set_phy_address(WRIOP1_DPMAC5, AQ_PHY_ADDR1);
+ wriop_set_phy_address(WRIOP1_DPMAC6, AQ_PHY_ADDR2);
+ wriop_set_phy_address(WRIOP1_DPMAC7, AQ_PHY_ADDR3);
+ wriop_set_phy_address(WRIOP1_DPMAC8, AQ_PHY_ADDR4);
+
+ break;
+ default:
+ printf("SerDes1 protocol 0x%x is not supported on LS2085aRDB\n",
+ srds_s1);
+ break;
+ }
+
+ for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC4; i++) {
+ interface = wriop_get_enet_if(i);
+ switch (interface) {
+ case PHY_INTERFACE_MODE_XGMII:
+ dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+ wriop_set_mdio(i, dev);
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = WRIOP1_DPMAC5; i <= WRIOP1_DPMAC8; i++) {
+ switch (wriop_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+ wriop_set_mdio(i, dev);
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Load CORTINA CS4340 PHY firmware */
+ load_phy_firmware();
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c
index d05f2bc..6cb7b13 100644
--- a/board/freescale/ls2085ardb/ls2085ardb.c
+++ b/board/freescale/ls2085ardb/ls2085ardb.c
@@ -176,19 +176,6 @@
return dram_to_hide;
}
-int board_eth_init(bd_t *bis)
-{
- int error = 0;
-
-#ifdef CONFIG_FSL_MC_ENET
- error = cpu_eth_init(bis);
-#endif
-
- error = pci_eth_init(bis);
-
- return error;
-}
-
#ifdef CONFIG_FSL_MC_ENET
void fdt_fixup_board_enet(void *fdt)
{