Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- mvebu: a38x: Define supported UART baudrates (Pali)
- kwbimage: Misc improvements (Pali)
- espressobin/turris_mox/turris_omnia: Enable some more devices
like SATA via PCIe, SATA & NVMe (Pali)
- a37xx: Remove unused CONFIG_DEBUG_UART_SHIFT options (Pali)
- turris_omnia: Disable MCU watchdog in SPL when booting over
UART (Marek)
- kwbimage: Fix some Coverity issue (Heinrich)
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 0b935c4..0272dd7 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -14,6 +14,7 @@
#include <asm/pl310.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
+#include <asm/spl.h>
#include <sdhci.h>
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
@@ -80,6 +81,65 @@
return MVEBU_SOC_UNKNOWN;
}
+u32 get_boot_device(void)
+{
+ u32 val;
+ u32 boot_device;
+
+ /*
+ * First check, if UART boot-mode is active. This can only
+ * be done, via the bootrom error register. Here the
+ * MSB marks if the UART mode is active.
+ */
+ val = readl(CONFIG_BOOTROM_ERR_REG);
+ boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS;
+ debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device);
+ if (boot_device == BOOTROM_ERR_MODE_UART)
+ return BOOT_DEVICE_UART;
+
+#ifdef CONFIG_ARMADA_38X
+ /*
+ * If the bootrom error code contains any other than zeros it's an
+ * error condition and the bootROM has fallen back to UART boot
+ */
+ boot_device = (val & BOOTROM_ERR_CODE_MASK) >> BOOTROM_ERR_CODE_OFFS;
+ if (boot_device)
+ return BOOT_DEVICE_UART;
+#endif
+
+ /*
+ * Now check the SAR register for the strapped boot-device
+ */
+ val = readl(CONFIG_SAR_REG); /* SAR - Sample At Reset */
+ boot_device = (val & BOOT_DEV_SEL_MASK) >> BOOT_DEV_SEL_OFFS;
+ debug("SAR_REG=0x%08x boot_device=0x%x\n", val, boot_device);
+ switch (boot_device) {
+#ifdef BOOT_FROM_NAND
+ case BOOT_FROM_NAND:
+ return BOOT_DEVICE_NAND;
+#endif
+#ifdef BOOT_FROM_MMC
+ case BOOT_FROM_MMC:
+ case BOOT_FROM_MMC_ALT:
+ return BOOT_DEVICE_MMC1;
+#endif
+ case BOOT_FROM_UART:
+#ifdef BOOT_FROM_UART_ALT
+ case BOOT_FROM_UART_ALT:
+#endif
+ return BOOT_DEVICE_UART;
+#ifdef BOOT_FROM_SATA
+ case BOOT_FROM_SATA:
+ case BOOT_FROM_SATA_ALT:
+ return BOOT_DEVICE_SATA;
+#endif
+ case BOOT_FROM_SPI:
+ return BOOT_DEVICE_SPI;
+ default:
+ return BOOT_DEVICE_BOOTROM;
+ };
+}
+
#if defined(CONFIG_DISPLAY_CPUINFO)
#if defined(CONFIG_ARMADA_375)