Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
"common/main.c" can use the "reset_cmd_timeout()" function before
entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
slightly different. see include/configs/hymod.h for an example
(requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
config.mk to allow board configurations to override the GNU
linker script, selected via the LDSCRIPT, make variable, and to
give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
o correctly extends the timeout depending on the size of all
queued messages for both transmit and receive
o will not continue with receive if transmit times out
o ensures that the error callback is done for all queued tx
and rx messages
o correctly detects both tx and rx timeouts, only delivers one to
the callback, and does not overwrite an earlier error
o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
technically correct
- many Hymod board changes
diff --git a/include/mpc8260_irq.h b/include/mpc8260_irq.h
index 046dd32..9bee9a3 100644
--- a/include/mpc8260_irq.h
+++ b/include/mpc8260_irq.h
@@ -28,6 +28,13 @@
*/
#define SIU_INT_SMC1 ((uint)0x04)
#define SIU_INT_SMC2 ((uint)0x05)
+#define SIU_INT_IRQ1 ((uint)0x13)
+#define SIU_INT_IRQ2 ((uint)0x14)
+#define SIU_INT_IRQ3 ((uint)0x15)
+#define SIU_INT_IRQ4 ((uint)0x16)
+#define SIU_INT_IRQ5 ((uint)0x17)
+#define SIU_INT_IRQ6 ((uint)0x18)
+#define SIU_INT_IRQ7 ((uint)0x19)
#define SIU_INT_FCC1 ((uint)0x20)
#define SIU_INT_FCC2 ((uint)0x21)
#define SIU_INT_FCC3 ((uint)0x22)