| #include <asm/io.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/prcm.h> |
| |
| #ifdef CONFIG_SPL_BUILD |
| void clock_init_safe(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| struct sunxi_prcm_reg *const prcm = |
| (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; |
| |
| if (IS_ENABLED(CONFIG_MACH_SUN50I_H616)) { |
| /* this seems to enable PLLs on H616 */ |
| setbits_le32(&prcm->sys_pwroff_gating, 0x10); |
| setbits_le32(&prcm->res_cal_ctrl, 2); |
| } |
| |
| if (IS_ENABLED(CONFIG_MACH_SUN50I_H616) || |
| IS_ENABLED(CONFIG_MACH_SUN50I_H6)) { |
| clrbits_le32(&prcm->res_cal_ctrl, 1); |
| setbits_le32(&prcm->res_cal_ctrl, 1); |
| } |
| |
| if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) { |
| /* set key field for ldo enable */ |
| setbits_le32(&prcm->pll_ldo_cfg, 0xA7000000); |
| /* set PLL VDD LDO output to 1.14 V */ |
| setbits_le32(&prcm->pll_ldo_cfg, 0x60000); |
| } |
| |
| clock_set_pll1(408000000); |
| |
| writel(CCM_PLL6_DEFAULT, &ccm->pll6_cfg); |
| while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_LOCK)) |
| ; |
| |
| clrsetbits_le32(&ccm->cpu_axi_cfg, CCM_CPU_AXI_APB_MASK | CCM_CPU_AXI_AXI_MASK, |
| CCM_CPU_AXI_DEFAULT_FACTORS); |
| |
| writel(CCM_PSI_AHB1_AHB2_DEFAULT, &ccm->psi_ahb1_ahb2_cfg); |
| #ifdef CCM_AHB3_DEFAULT |
| writel(CCM_AHB3_DEFAULT, &ccm->ahb3_cfg); |
| #endif |
| writel(CCM_APB1_DEFAULT, &ccm->apb1_cfg); |
| |
| /* |
| * The mux and factor are set, but the clock will be enabled in |
| * DRAM initialization code. |
| */ |
| writel(MBUS_CLK_SRC_PLL6X2 | MBUS_CLK_M(3), &ccm->mbus_cfg); |
| } |
| #endif |
| |
| void clock_init_uart(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| /* uart clock source is apb2 */ |
| writel(APB2_CLK_SRC_OSC24M| |
| APB2_CLK_RATE_N_1| |
| APB2_CLK_RATE_M(1), |
| &ccm->apb2_cfg); |
| |
| /* open the clock for uart */ |
| setbits_le32(&ccm->uart_gate_reset, |
| 1 << (CONFIG_CONS_INDEX - 1)); |
| |
| /* deassert uart reset */ |
| setbits_le32(&ccm->uart_gate_reset, |
| 1 << (RESET_SHIFT + CONFIG_CONS_INDEX - 1)); |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| void clock_set_pll1(unsigned int clk) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| u32 val; |
| |
| /* Do not support clocks < 288MHz as they need factor P */ |
| if (clk < 288000000) clk = 288000000; |
| |
| /* Switch to 24MHz clock while changing PLL1 */ |
| val = readl(&ccm->cpu_axi_cfg); |
| val &= ~CCM_CPU_AXI_MUX_MASK; |
| val |= CCM_CPU_AXI_MUX_OSC24M; |
| writel(val, &ccm->cpu_axi_cfg); |
| |
| /* clk = 24*n/p, p is ignored if clock is >288MHz */ |
| val = CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2; |
| val |= CCM_PLL1_CTRL_N(clk / 24000000); |
| if (IS_ENABLED(CONFIG_MACH_SUN50I_H616)) |
| val |= CCM_PLL1_OUT_EN; |
| if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) |
| val |= CCM_PLL1_OUT_EN | CCM_PLL1_LDO_EN; |
| writel(val, &ccm->pll1_cfg); |
| while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {} |
| |
| /* Switch CPU to PLL1 */ |
| val = readl(&ccm->cpu_axi_cfg); |
| val &= ~CCM_CPU_AXI_MUX_MASK; |
| val |= CCM_CPU_AXI_MUX_PLL_CPUX; |
| writel(val, &ccm->cpu_axi_cfg); |
| } |
| #endif |
| |
| unsigned int clock_get_pll6(void) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| uint32_t rval = readl(&ccm->pll6_cfg); |
| int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; |
| int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >> |
| CCM_PLL6_CTRL_DIV2_SHIFT) + 1; |
| int div1, m; |
| |
| if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) { |
| div1 = ((rval & CCM_PLL6_CTRL_P0_MASK) >> |
| CCM_PLL6_CTRL_P0_SHIFT) + 1; |
| m = 1; |
| } else { |
| div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >> |
| CCM_PLL6_CTRL_DIV1_SHIFT) + 1; |
| if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) |
| m = 4; |
| else |
| m = 2; |
| } |
| |
| return 24000000U * n / m / div1 / div2; |
| } |
| |
| int clock_twi_onoff(int port, int state) |
| { |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| struct sunxi_prcm_reg *const prcm = |
| (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; |
| u32 value, *ptr; |
| int shift; |
| |
| value = BIT(GATE_SHIFT) | BIT (RESET_SHIFT); |
| |
| if (port == 5) { |
| shift = 0; |
| ptr = &prcm->twi_gate_reset; |
| } else { |
| shift = port; |
| ptr = &ccm->twi_gate_reset; |
| } |
| |
| /* set the apb clock gate and reset for twi */ |
| if (state) |
| setbits_le32(ptr, value << shift); |
| else |
| clrbits_le32(ptr, value << shift); |
| |
| return 0; |
| } |