x86: Add Advantech SOM-DB5800/SOM-6867 support
Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
This is very similar to conga-qeval20-qa3-e3845 in that there is a
reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
installed.
Currently supported:
- 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
SOM-DB5800.
- 4x USB 2.0 (EHCI)
- Video
- SATA
- Ethernet
- PCIe
- Realtek ALC892 HD Audio
Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
HDA_SDI0 is set in DT to enable HD Audio codec.
Pin defaults for codec pin complexs are not changed.
Not supported:
- Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
- USB 3.0 (XHCI)
- TPM
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/board/advantech/som-db5800-som-6867/Kconfig b/board/advantech/som-db5800-som-6867/Kconfig
new file mode 100644
index 0000000..f6f3748
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/Kconfig
@@ -0,0 +1,28 @@
+if TARGET_SOM_DB5800_SOM_6867
+
+config SYS_BOARD
+ default "som-db5800-som-6867"
+
+config SYS_VENDOR
+ default "advantech"
+
+config SYS_SOC
+ default "baytrail"
+
+config SYS_CONFIG_NAME
+ default "som-db5800-som-6867"
+
+config SYS_TEXT_BASE
+ default 0xfff00000 if !EFI_STUB
+ default 0x01110000 if EFI_STUB
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select X86_RESET_VECTOR if !EFI_STUB
+ select INTEL_BAYTRAIL
+ select BOARD_ROMSIZE_KB_8192
+
+config PCIE_ECAM_BASE
+ default 0xe0000000
+
+endif