diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index e282096..6944ea7 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -39,17 +39,17 @@
 
 #undef debug
 #ifdef MII_DEBUG
-#define debug(fmt,args...)	printf (fmt ,##args)
+#define debug(fmt, args...)	printf(fmt, ##args)
 #else
-#define debug(fmt,args...)
+#define debug(fmt, args...)
 #endif /* MII_DEBUG */
 
 struct mii_dev {
 	struct list_head link;
 	const char *name;
-	int (*read) (const char *devname, unsigned char addr,
+	int (*read)(const char *devname, unsigned char addr,
 		     unsigned char reg, unsigned short *value);
-	int (*write) (const char *devname, unsigned char addr,
+	int (*write)(const char *devname, unsigned char addr,
 		      unsigned char reg, unsigned short value);
 };
 
@@ -86,7 +86,7 @@
  */
 void miiphy_init(void)
 {
-	INIT_LIST_HEAD (&mii_devs);
+	INIT_LIST_HEAD(&mii_devs);
 	current_mii = NULL;
 }
 
@@ -95,9 +95,9 @@
  * Register read and write MII access routines for the device <name>.
  */
 void miiphy_register(const char *name,
-		      int (*read) (const char *devname, unsigned char addr,
+		      int (*read)(const char *devname, unsigned char addr,
 				   unsigned char reg, unsigned short *value),
-		      int (*write) (const char *devname, unsigned char addr,
+		      int (*write)(const char *devname, unsigned char addr,
 				    unsigned char reg, unsigned short value))
 {
 	struct mii_dev *new_dev;
@@ -112,30 +112,30 @@
 	}
 
 	/* allocate memory */
-	name_len = strlen (name);
+	name_len = strlen(name);
 	new_dev =
-	    (struct mii_dev *)malloc (sizeof (struct mii_dev) + name_len + 1);
+		(struct mii_dev *)malloc(sizeof(struct mii_dev) + name_len + 1);
 
 	if (new_dev == NULL) {
-		printf ("miiphy_register: cannot allocate memory for '%s'\n",
+		printf("miiphy_register: cannot allocate memory for '%s'\n",
 			name);
 		return;
 	}
-	memset (new_dev, 0, sizeof (struct mii_dev) + name_len);
+	memset(new_dev, 0, sizeof(struct mii_dev) + name_len);
 
 	/* initalize mii_dev struct fields */
-	INIT_LIST_HEAD (&new_dev->link);
+	INIT_LIST_HEAD(&new_dev->link);
 	new_dev->read = read;
 	new_dev->write = write;
 	new_dev->name = new_name = (char *)(new_dev + 1);
-	strncpy (new_name, name, name_len);
+	strncpy(new_name, name, name_len);
 	new_name[name_len] = '\0';
 
-	debug ("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
+	debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
 	       new_dev->name, new_dev->read, new_dev->write);
 
 	/* add it to the list */
-	list_add_tail (&new_dev->link, &mii_devs);
+	list_add_tail(&new_dev->link, &mii_devs);
 
 	if (!current_mii)
 		current_mii = new_dev;
@@ -220,20 +220,20 @@
  *
  * Print out list of registered MII capable devices.
  */
-void miiphy_listdev (void)
+void miiphy_listdev(void)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
 
-	puts ("MII devices: ");
-	list_for_each (entry, &mii_devs) {
-		dev = list_entry (entry, struct mii_dev, link);
-		printf ("'%s' ", dev->name);
+	puts("MII devices: ");
+	list_for_each(entry, &mii_devs) {
+		dev = list_entry(entry, struct mii_dev, link);
+		printf("'%s' ", dev->name);
 	}
-	puts ("\n");
+	puts("\n");
 
 	if (current_mii)
-		printf ("Current device: '%s'\n", current_mii->name);
+		printf("Current device: '%s'\n", current_mii->name);
 }
 
 /*****************************************************************************
@@ -253,30 +253,30 @@
 	unsigned int reg = 0;
 	unsigned short tmp;
 
-	if (miiphy_read (devname, addr, MII_PHYSID2, &tmp) != 0) {
-		debug ("PHY ID register 2 read failed\n");
-		return (-1);
+	if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) {
+		debug("PHY ID register 2 read failed\n");
+		return -1;
 	}
 	reg = tmp;
 
-	debug ("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
+	debug("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
 
 	if (reg == 0xFFFF) {
 		/* No physical device present at this address */
-		return (-1);
+		return -1;
 	}
 
-	if (miiphy_read (devname, addr, MII_PHYSID1, &tmp) != 0) {
-		debug ("PHY ID register 1 read failed\n");
-		return (-1);
+	if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) {
+		debug("PHY ID register 1 read failed\n");
+		return -1;
 	}
 	reg |= tmp << 16;
-	debug ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
+	debug("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
 
 	*oui = (reg >> 10);
 	*model = (unsigned char)((reg >> 4) & 0x0000003F);
 	*rev = (unsigned char)(reg & 0x0000000F);
-	return (0);
+	return 0;
 }
 
 /*****************************************************************************
@@ -290,16 +290,16 @@
 	unsigned short reg;
 	int timeout = 500;
 
-	if (miiphy_read (devname, addr, MII_BMCR, &reg) != 0) {
-		debug ("PHY status read failed\n");
-		return (-1);
+	if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
+		debug("PHY status read failed\n");
+		return -1;
 	}
-	if (miiphy_write (devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
-		debug ("PHY reset failed\n");
-		return (-1);
+	if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
+		debug("PHY reset failed\n");
+		return -1;
 	}
 #ifdef CONFIG_PHY_RESET_DELAY
-	udelay (CONFIG_PHY_RESET_DELAY);	/* Intel LXT971A needs this */
+	udelay(CONFIG_PHY_RESET_DELAY);	/* Intel LXT971A needs this */
 #endif
 	/*
 	 * Poll the control register for the reset bit to go to 0 (it is
@@ -315,12 +315,12 @@
 		udelay(1000);
 	}
 	if ((reg & 0x8000) == 0) {
-		return (0);
+		return 0;
 	} else {
-		puts ("PHY reset timed out\n");
-		return (-1);
+		puts("PHY reset timed out\n");
+		return -1;
 	}
-	return (0);
+	return 0;
 }
 
 /*****************************************************************************
@@ -338,33 +338,33 @@
 	 * Check for 1000BASE-X.  If it is supported, then assume that the speed
 	 * is 1000.
 	 */
-	if (miiphy_is_1000base_x (devname, addr)) {
+	if (miiphy_is_1000base_x(devname, addr))
 		return _1000BASET;
-	}
+
 	/*
 	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
 	 */
 	/* Check for 1000BASE-T. */
-	if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) {
-		printf ("PHY 1000BT status");
+	if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
+		printf("PHY 1000BT status");
 		goto miiphy_read_failed;
 	}
 	if (btsr != 0xFFFF &&
-	    (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+			(btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)))
 		return _1000BASET;
-	}
+
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) {
-		printf ("PHY speed");
+	if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
+		printf("PHY speed");
 		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
 	if (bmcr & BMCR_ANENABLE) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
-			printf ("PHY AN speed");
+		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
+			printf("PHY AN speed");
 			goto miiphy_read_failed;
 		}
 		return (anlpar & LPA_100) ? _100BASET : _10BASET;
@@ -373,7 +373,7 @@
 	return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
 
 miiphy_read_failed:
-	printf (" read failed, assuming 10BASE-T\n");
+	printf(" read failed, assuming 10BASE-T\n");
 	return _10BASET;
 }
 
@@ -389,10 +389,10 @@
 	u16 btsr;
 
 	/* Check for 1000BASE-X. */
-	if (miiphy_is_1000base_x (devname, addr)) {
+	if (miiphy_is_1000base_x(devname, addr)) {
 		/* 1000BASE-X */
-		if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
-			printf ("1000BASE-X PHY AN duplex");
+		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
+			printf("1000BASE-X PHY AN duplex");
 			goto miiphy_read_failed;
 		}
 	}
@@ -400,8 +400,8 @@
 	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
 	 */
 	/* Check for 1000BASE-T. */
-	if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) {
-		printf ("PHY 1000BT status");
+	if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
+		printf("PHY 1000BT status");
 		goto miiphy_read_failed;
 	}
 	if (btsr != 0xFFFF) {
@@ -414,15 +414,15 @@
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) {
-		puts ("PHY duplex");
+	if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
+		puts("PHY duplex");
 		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
 	if (bmcr & BMCR_ANENABLE) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
-			puts ("PHY AN duplex");
+		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
+			puts("PHY AN duplex");
 			goto miiphy_read_failed;
 		}
 		return (anlpar & (LPA_10FULL | LPA_100FULL)) ?
@@ -432,7 +432,7 @@
 	return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
 
 miiphy_read_failed:
-	printf (" read failed, assuming half duplex\n");
+	printf(" read failed, assuming half duplex\n");
 	return HALF;
 }
 
@@ -446,8 +446,8 @@
 #if defined(CONFIG_PHY_GIGE)
 	u16 exsr;
 
-	if (miiphy_read (devname, addr, MII_ESTATUS, &exsr)) {
-		printf ("PHY extended status read failed, assuming no "
+	if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) {
+		printf("PHY extended status read failed, assuming no "
 			"1000BASE-X\n");
 		return 0;
 	}
@@ -467,17 +467,17 @@
 	unsigned short reg;
 
 	/* dummy read; needed to latch some phys */
-	(void)miiphy_read (devname, addr, MII_BMSR, &reg);
-	if (miiphy_read (devname, addr, MII_BMSR, &reg)) {
-		puts ("MII_BMSR read failed, assuming no link\n");
-		return (0);
+	(void)miiphy_read(devname, addr, MII_BMSR, &reg);
+	if (miiphy_read(devname, addr, MII_BMSR, &reg)) {
+		puts("MII_BMSR read failed, assuming no link\n");
+		return 0;
 	}
 
 	/* Determine if a link is active */
 	if ((reg & BMSR_LSTATUS) != 0) {
-		return (1);
+		return 1;
 	} else {
-		return (0);
+		return 0;
 	}
 }
 #endif