Merge branch 'master' of git://www.denx.de/git/u-boot-sh
diff --git a/CREDITS b/CREDITS
index 1130c9e..57a82d2 100644
--- a/CREDITS
+++ b/CREDITS
@@ -290,7 +290,7 @@
N: TsiChung Liew
E: Tsi-Chung.Liew@freescale.com
-D: Support for ColdFire MCF523x, MCF532x, MCF5445x
+D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x
W: www.freescale.com
N: Leif Lindholm
@@ -305,7 +305,7 @@
N: Dave Liu
E: daveliu@freescale.com
-D: Support for MPC832x, MPC8360, MPC837x
+D: Support for MPC8315, MPC832x, MPC8360, MPC837x
W: www.freescale.com
N: Raymond Lo
diff --git a/MAINTAINERS b/MAINTAINERS
index 239f5c3..552d0fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -58,6 +58,10 @@
ESTEEM192E MPC8xx
+Joe D'Abbraccio <ljd015@freescale.com>
+
+ MPC837xERDB MPC837x
+
Kári Davíðsson <kd@flaga.is>
FLAGADM MPC823
@@ -150,6 +154,7 @@
DASA_SIM IOP480 (PPC401)
DP405 PPC405EP
DU405 PPC405GP
+ DU440 PPC440EPx
G2000 PPC405EP
HH405 PPC405EP
HUB405 PPC405EP
@@ -232,6 +237,7 @@
Dave Liu <daveliu@freescale.com>
+ MPC8315ERDB MPC8315
MPC832XEMDS MPC832x
MPC8360EMDS MPC8360
MPC837XEMDS MPC837x
@@ -642,9 +648,13 @@
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ M52277EVB mcf5227x
M5235EVB mcf52x2
M5329EVB mcf532x
+ M5373EVB mcf532x
M54455EVB mcf5445x
+ M5475EVB mcf547x_8x
+ M5485EVB mcf547x_8x
Hayden Fraser <Hayden.Fraser@freescale.com>
@@ -663,6 +673,7 @@
ATSTK1002 AT32AP7000
ATSTK1003 AT32AP7001
ATSTK1004 AT32AP7002
+ ATNGW100 AT32AP7000
#########################################################################
# SuperH Systems: #
diff --git a/MAKEALL b/MAKEALL
index 180bc44..eaca198 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -178,6 +178,7 @@
DASA_SIM \
DP405 \
DU405 \
+ DU440 \
ebony \
ERIC \
EXBITGEN \
@@ -309,6 +310,7 @@
LIST_83xx=" \
MPC8313ERDB_33 \
MPC8313ERDB_66 \
+ MPC8315ERDB \
MPC8323ERDB \
MPC832XEMDS \
MPC832XEMDS_ATM \
@@ -320,6 +322,7 @@
MPC8360ERDK_33 \
MPC8360ERDK_66 \
MPC837XEMDS \
+ MPC837XERDB \
sbc8349 \
TQM834x \
"
@@ -641,14 +644,18 @@
EB+MCF-EV123 \
EB+MCF-EV123_internal \
idmr \
+ M52277EVB \
M5235EVB \
M5249EVB \
M5253EVB \
M5271EVB \
M5272C3 \
M5282EVB \
- M5329EVB \
+ M5329AFEE \
+ M5373EVB \
M54455EVB \
+ M5475AFE \
+ M5485AFE \
r5200 \
TASREG \
"
@@ -661,6 +668,7 @@
atstk1002 \
atstk1003 \
atstk1004 \
+ atngw100 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index c322c5c..1ae77cd 100644
--- a/Makefile
+++ b/Makefile
@@ -218,6 +218,7 @@
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
+LIBS += drivers/dma/libdma.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
@@ -230,6 +231,7 @@
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
+LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
@@ -377,6 +379,7 @@
TAG_SUBDIRS += drivers/qe
TAG_SUBDIRS += drivers/rtc
TAG_SUBDIRS += drivers/serial
+TAG_SUBDIRS += drivers/spi
TAG_SUBDIRS += drivers/usb
TAG_SUBDIRS += drivers/video
@@ -1206,6 +1209,9 @@
DU405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
+DU440_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
+
ebony_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
@@ -1739,6 +1745,9 @@
## Coldfire
#########################################################################
+M52277EVB_config: unconfig
+ @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
+
M5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config: unconfig
@@ -1811,6 +1820,16 @@
fi
@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
+M5373EVB_config : unconfig
+ @case "$@" in \
+ M5373EVB_config) NAND=16;; \
+ esac; \
+ >include/config.h ; \
+ if [ "$${NAND}" != "0" ] ; then \
+ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
+
M54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
@@ -1843,6 +1862,76 @@
$(XECHO) "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+M5475AFE_config \
+M5475BFE_config \
+M5475CFE_config \
+M5475DFE_config \
+M5475EFE_config \
+M5475FFE_config \
+M5475GFE_config : unconfig
+ @case "$@" in \
+ M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+ M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+ M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ esac; \
+ >include/config.h ; \
+ echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
+ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ if [ "$${RAM1}" != "0" ] ; then \
+ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${CODE}" != "0" ] ; then \
+ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${VID}" == "1" ] ; then \
+ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${USB}" == "1" ] ; then \
+ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+
+M5485AFE_config \
+M5485BFE_config \
+M5485CFE_config \
+M5485DFE_config \
+M5485EFE_config \
+M5485FFE_config \
+M5485GFE_config \
+M5485HFE_config : unconfig
+ @case "$@" in \
+ M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+ M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+ M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485HFE_config) BOOT=2;CODE=;VID=1;USB=0;RAM=64;RAM1=0;; \
+ esac; \
+ >include/config.h ; \
+ echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
+ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ if [ "$${RAM1}" != "0" ] ; then \
+ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${CODE}" != "0" ] ; then \
+ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${VID}" == "1" ] ; then \
+ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${USB}" == "1" ] ; then \
+ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
+
#########################################################################
## MPC83xx Systems
#########################################################################
@@ -1861,6 +1950,9 @@
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+MPC8315ERDB_config: unconfig
+ @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+
MPC8323ERDB_config: unconfig
@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
@@ -1968,6 +2060,9 @@
fi ;
@$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
+MPC837XERDB_config: unconfig
+ @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
+
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
@@ -2745,6 +2840,9 @@
atstk1004_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+atngw100_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
+
#########################################################################
#########################################################################
#########################################################################
diff --git a/README b/README
index f2a4914..463bbd0 100644
--- a/README
+++ b/README
@@ -136,8 +136,10 @@
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
- mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
+ - mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs
- mcf532x Files specific to Freescale ColdFire MCF5329 CPUs
- mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs
+ - mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs
- mips Files specific to MIPS CPUs
- mpc5xx Files specific to Freescale MPC5xx CPUs
- mpc5xxx Files specific to Freescale MPC5xxx CPUs
@@ -1377,6 +1379,14 @@
SPI configuration items (port pins to use, etc). For
an example, see include/configs/sacsng.h.
+ CONFIG_HARD_SPI
+
+ Enables a hardware SPI driver for general-purpose reads
+ and writes. As with CONFIG_SOFT_SPI, the board configuration
+ must define a list of chip-select function pointers.
+ Currently supported on some MPC8xxx processors. For an
+ example, see include/configs/mpc8349emds.h.
+
- FPGA Support: CONFIG_FPGA
Enables FPGA subsystem.
@@ -2691,6 +2701,10 @@
=> setenv ethact SCC ETHERNET
=> ping 10.0.0.1 # traffic sent on SCC ETHERNET
+ ethrotate - When set to "no" U-Boot does not go through all
+ available network interfaces.
+ It just stays at the currently selected interface.
+
netretry - When set to "no" each network operation will
either succeed or fail without retrying.
When set to "once" the network operation will
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index b2666dd..0d2f27f 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -294,4 +294,4 @@
-----------------------------------------------\n"
);
-#endif /* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+#endif /* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index b2666dd..0d2f27f 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -294,4 +294,4 @@
-----------------------------------------------\n"
);
-#endif /* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+#endif /* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 306c92c..46a37c6 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -1,4 +1,6 @@
/*
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -23,7 +25,7 @@
#include <asm-ppc/mmu.h>
#include <config.h>
-/**************************************************************************
+/*
* TLB TABLE
*
* This table is used by the cpu boot code to setup the initial tlb
@@ -31,8 +33,7 @@
* this table lets each board set things up however they like.
*
* Pointer to the table is returned in r1
- *
- *************************************************************************/
+ */
.section .bootpg,"ax"
.globl tlbtab
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index e46efef..ce0537f 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -4,7 +4,7 @@
*
* (C) Copyright 2006
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -29,11 +29,12 @@
#include <asm/gpio.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/bitops.h>
#include <asm/ppc4xx-intvec.h>
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size (ulong base, int banknum);
@@ -46,9 +47,9 @@
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
- /*--------------------------------------------------------------------
+ /*
* Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
+ */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
@@ -87,9 +88,11 @@
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
- sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+ SDR0_PFC1_SELECT_CONFIG_4;
mfsdr(SDR0_PFC2, sdr0_pfc2);
- sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+ SDR0_PFC2_SELECT_CONFIG_4;
mtsdr(SDR0_PFC2, sdr0_pfc2);
mtsdr(SDR0_PFC1, sdr0_pfc1);
@@ -109,9 +112,6 @@
return 0;
}
-/*---------------------------------------------------------------------------+
- | misc_init_r.
- +---------------------------------------------------------------------------*/
int misc_init_r(void)
{
uint pbcr;
@@ -124,11 +124,7 @@
char *act = getenv("usbact");
#endif
- /*
- * FLASH stuff...
- */
-
- /* Re-do sizing to get full correct info */
+ /* Re-do flash sizing to get full correct info */
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -140,32 +136,7 @@
mtdcr(ebccfga, pb0cr);
#endif
pbcr = mfdcr(ebccfgd);
- switch (gd->bd->bi_flashsize) {
- case 1 << 20:
- size_val = 0;
- break;
- case 2 << 20:
- size_val = 1;
- break;
- case 4 << 20:
- size_val = 2;
- break;
- case 8 << 20:
- size_val = 3;
- break;
- case 16 << 20:
- size_val = 4;
- break;
- case 32 << 20:
- size_val = 5;
- break;
- case 64 << 20:
- size_val = 6;
- break;
- case 128 << 20:
- size_val = 7;
- break;
- }
+ size_val = ffs(gd->bd->bi_flashsize) - 21;
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
mtdcr(ebccfga, pb3cr);
@@ -197,7 +168,7 @@
* USB suff...
*/
#ifdef CONFIG_440EPX
- if (act == NULL || strcmp(act, "hostdev") == 0) {
+ if (act == NULL || strcmp(act, "hostdev") == 0) {
/* SDR Setting */
mfsdr(SDR0_PFC1, sdr0_pfc1);
mfsdr(SDR0_USB2D0CR, usb2d0cr);
@@ -205,27 +176,32 @@
mfsdr(SDR0_USB2H0CR, usb2h0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
- /* An 8-bit/60MHz interface is the only possible alternative
- when connecting the Device to the PHY */
+ /*
+ * An 8-bit/60MHz interface is the only possible alternative
+ * when connecting the Device to the PHY
+ */
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
- /* To enable the USB 2.0 Device function through the UTMI interface */
+ /*
+ * To enable the USB 2.0 Device function
+ * through the UTMI interface
+ */
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
- usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
- sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
mtsdr(SDR0_PFC1, sdr0_pfc1);
mtsdr(SDR0_USB2D0CR, usb2d0cr);
@@ -245,13 +221,13 @@
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
udelay (1000);
@@ -276,31 +252,31 @@
mfsdr(SDR0_PFC1, sdr0_pfc1);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
- usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
- sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
mtsdr(SDR0_USB2H0CR, usb2h0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mtsdr(SDR0_USB2D0CR, usb2d0cr);
mtsdr(SDR0_PFC1, sdr0_pfc1);
- /*clear resets*/
+ /* clear resets */
udelay (1000);
mtsdr(SDR0_SRST1, 0x00000000);
udelay (1000);
@@ -398,43 +374,42 @@
}
#endif
-/*************************************************************************
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
+/*
+ * pci_pre_init
*
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
*
- ************************************************************************/
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB3 devices to 0.
- | Set PLB3 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
mfsdr(sdr_amp1, addr);
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb3_acr);
mtdcr(plb3_acr, addr | 0x80000000);
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB4 devices to 0.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
mfsdr(sdr_amp0, addr);
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
mtdcr(plb4_acr, addr);
- /*-------------------------------------------------------------------------+
- | Set Nebula PLB4 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set Nebula PLB4 arbiter to fair mode.
+ */
/* Segment0 */
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
@@ -456,47 +431,51 @@
}
#endif /* defined(CONFIG_PCI) */
-/*************************************************************************
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
+/*
+ * pci_target_init
*
- ************************************************************************/
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
- /*--------------------------------------------------------------------------+
+ /*
* Set up Direct MMIO registers
- *--------------------------------------------------------------------------*/
- /*--------------------------------------------------------------------------+
- | PowerPC440EPX PCI Master configuration.
- | Map one 1Gig range of PLB/processor addresses to PCI memory space.
- | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
- | Use byte reversed out routines to handle endianess.
- | Make this region non-prefetchable.
- +--------------------------------------------------------------------------*/
- out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ */
+ /*
+ * PowerPC440EPX PCI Master configuration.
+ * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ * PLB address 0xA0000000-0xDFFFFFFF
+ * ==> PCI address 0xA0000000-0xDFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ * Make this region non-prefetchable.
+ */
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
+ /* - disabled b4 setting */
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
- out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */
+ /* and enable region */
- out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */
+ /* - disabled b4 setting */
out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
- out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
- out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */
+ /* and enable region */
out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
- out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
- out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
- out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
- /*--------------------------------------------------------------------------+
+ /*
* Set up Configuration registers
- *--------------------------------------------------------------------------*/
+ */
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
@@ -515,51 +494,46 @@
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-/*************************************************************************
- * pci_master_init
- *
- ************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
- /*--------------------------------------------------------------------------+
- | Write the PowerPC440 EP PCI Configuration regs.
- | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- | Enable PowerPC440 EP to act as a PCI memory target (PTM).
- +--------------------------------------------------------------------------*/
+ /*
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ */
pci_read_config_word(0, PCI_COMMAND, &temp_short);
pci_write_config_word(0, PCI_COMMAND,
temp_short | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-/*************************************************************************
- * is_pci_host
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
+/*
+ * is_pci_host
*
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
*
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
*
- ************************************************************************/
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
/* Cactus is always configured as host. */
return (1);
}
-#endif /* defined(CONFIG_PCI) */
+#endif /* defined(CONFIG_PCI) */
+
#if defined(CONFIG_POST)
/*
* Returns 1 if keys pressed to start the power-on long-running tests
diff --git a/board/atmel/atngw100/Makefile b/board/atmel/atngw100/Makefile
new file mode 100644
index 0000000..1b5c635
--- /dev/null
+++ b/board/atmel/atngw100/Makefile
@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o eth.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
new file mode 100644
index 0000000..bd4b6b4
--- /dev/null
+++ b/board/atmel/atngw100/atngw100.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix2.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_info sdram = {
+ .phys_addr = CFG_SDRAM_BASE,
+ .row_bits = 13,
+ .col_bits = 9,
+ .bank_bits = 2,
+ .cas = 3,
+ .twr = 2,
+ .trc = 7,
+ .trp = 2,
+ .trcd = 2,
+ .tras = 5,
+ .txsr = 5,
+};
+
+int board_early_init_f(void)
+{
+ /* Set the SDRAM_ENABLE bit in the HEBI SFR */
+ hmatrix2_writel(SFR4, 1 << 1);
+
+ gpio_enable_ebi();
+ gpio_enable_usart1();
+
+#if defined(CONFIG_MACB)
+ gpio_enable_macb0();
+ gpio_enable_macb1();
+#endif
+#if defined(CONFIG_MMC)
+ gpio_enable_mmci();
+#endif
+
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ return sdram_init(&sdram);
+}
+
+void board_init_info(void)
+{
+ gd->bd->bi_phy_id[0] = 0x01;
+ gd->bd->bi_phy_id[1] = 0x03;
+}
diff --git a/board/atmel/atngw100/config.mk b/board/atmel/atngw100/config.mk
new file mode 100644
index 0000000..9a794e5
--- /dev/null
+++ b/board/atmel/atngw100/config.mk
@@ -0,0 +1,3 @@
+TEXT_BASE = 0x00000000
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS += --gc-sections
diff --git a/board/atmel/atngw100/eth.c b/board/atmel/atngw100/eth.c
new file mode 100644
index 0000000..d1d57bb
--- /dev/null
+++ b/board/atmel/atngw100/eth.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Ethernet initialization for the AVR32 Network Gateway
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/arch/memory-map.h>
+
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+#ifdef CONFIG_CMD_NET
+void atngw100_eth_initialize(bd_t *bi)
+{
+ macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+ macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
+}
+#endif
diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds
new file mode 100644
index 0000000..34e347a
--- /dev/null
+++ b/board/atmel/atngw100/u-boot.lds
@@ -0,0 +1,80 @@
+/* -*- Fundamental -*-
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+ .text : {
+ *(.text)
+ *(.text.*)
+ }
+
+ . = ALIGN(32);
+ __flashprog_start = .;
+ .flashprog : {
+ *(.flashprog)
+ }
+ . = ALIGN(32);
+ __flashprog_end = .;
+ _etext = .;
+
+ .rodata : {
+ *(.rodata)
+ *(.rodata.*)
+ }
+
+ . = ALIGN(8);
+ _data = .;
+ .data : {
+ *(.data)
+ *(.data.*)
+ }
+
+ . = ALIGN(4);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : {
+ KEEP(*(.u_boot_cmd))
+ }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ _got = .;
+ .got : {
+ *(.got)
+ }
+ _egot = .;
+
+ . = ALIGN(8);
+ _edata = .;
+
+ .bss : {
+ *(.bss)
+ *(.bss.*)
+ }
+ . = ALIGN(8);
+ _end = .;
+}
diff --git a/board/atum8548/Makefile b/board/atum8548/Makefile
index e198062..ac4e5838 100644
--- a/board/atum8548/Makefile
+++ b/board/atum8548/Makefile
@@ -29,9 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-
-SOBJS := init.o
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/atum8548/init.S b/board/atum8548/init.S
deleted file mode 100644
index 654a569..0000000
--- a/board/atum8548/init.S
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright 2007
- * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
- * Copyright 2004, 2007 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-#define LAWAR_TRGT_PCI1 0x00000000
-#define LAWAR_TRGT_PCI2 0x00100000
-#define LAWAR_TRGT_PCIE 0x00200000
-#define LAWAR_TRGT_DDR 0x00f00000
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long (2f-1f)/16
-
-1:
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, guarded
- * Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, MAS2_G)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, MAS2_G)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, MAS2_G)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, MAS2_G)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /* TLB 1 Initializations */
- /*
- * TLB 0, 1: 128M Non-cacheable, guarded
- * 0xf8000000 128M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE + 0x4000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE + 0x4000000, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 1G Non-cacheable, guarded
- * 0x80000000 1G PCI1/PCIE 8,9,a,b
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
- .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3, 4: 512M Non-cacheable, guarded
- * 0xc0000000 1G PCI2
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_PHYS, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_PHYS + 0x10000000, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 1M PCI1 IO
- * 0xe210_0000 1M PCI2 IO
- * 0xe300_0000 1M PCIe IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-2:
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
- * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe10f_ffff PCI1 IO 1M
- * 0xe280_0000 0xe20f_ffff PCI2 IO 1M
- * 0xe300_0000 0xe30f_ffff PCIe IO 1M
- * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * LAW 0 is reserved for boot mapping
- */
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
-
- .long (4f-3f)/8
-3:
- .long 0
- .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_1G)) & ~LAWAR_EN
-
- .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-
- .long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCI2_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-
- .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
-
- /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
-
-4:
- entry_end
diff --git a/board/atum8548/law.c b/board/atum8548/law.c
new file mode 100644
index 0000000..3606cbb
--- /dev/null
+++ b/board/atum8548/law.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
+ * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe10f_ffff PCI1 IO 1M
+ * 0xe280_0000 0xe20f_ffff PCI2 IO 1M
+ * 0xe300_0000 0xe30f_ffff PCIe IO 1M
+ * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * LAW 0 is reserved for boot mapping
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
+ SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+ /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+ SET_LAW_ENTRY(8, CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/atum8548/tlb.c b/board/atum8548/tlb.c
new file mode 100644
index 0000000..bb6ce76
--- /dev/null
+++ b/board/atum8548/tlb.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 Initializations */
+ /*
+ * TLB 0, 1: 128M Non-cacheable, guarded
+ * 0xf8000000 128M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_64M, 1),
+
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 2: 1G Non-cacheable, guarded
+ * 0x80000000 1G PCI1/PCIE 8,9,a,b
+ */
+ SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_1G, 1),
+
+ /*
+ * TLB 3, 4: 512M Non-cacheable, guarded
+ * 0xc0000000 1G PCI2
+ */
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 1M PCI1 IO
+ * 0xe210_0000 1M PCI2 IO
+ * 0xe300_0000 1M PCIe IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/atum8548/u-boot.lds b/board/atum8548/u-boot.lds
index 0d1c217..3f04cae 100644
--- a/board/atum8548/u-boot.lds
+++ b/board/atum8548/u-boot.lds
@@ -34,7 +34,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/atum8548/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +63,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/atum8548/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index b3d8bda..6954b30 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -30,8 +30,25 @@
#include <command.h>
#include <asm/blackfin.h>
#include <asm/io.h>
+#include <net.h>
#include "ether_bf537.h"
+/**
+ * is_valid_ether_addr - Determine if the given Ethernet address is valid
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
+ * a multicast address, and is not FF:FF:FF:FF:FF:FF.
+ *
+ * Return true if the address is valid.
+ */
+static inline int is_valid_ether_addr(const u8 * addr)
+{
+ /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
+ * explicitly check for it here. */
+ return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
+}
+
DECLARE_GLOBAL_DATA_PTR;
#define POST_WORD_ADDR 0xFF903FFC
diff --git a/board/bf537-stamp/ether_bf537.h b/board/bf537-stamp/ether_bf537.h
index 64240ba..22fc392 100644
--- a/board/bf537-stamp/ether_bf537.h
+++ b/board/bf537-stamp/ether_bf537.h
@@ -69,42 +69,3 @@
void DumpPHYRegs(void);
int SetupSystemRegs(int *opmode);
-
-/**
- * is_zero_ether_addr - Determine if give Ethernet address is all zeros.
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Return true if the address is all zeroes.
- */
-static inline int is_zero_ether_addr(const u8 * addr)
-{
- return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
-}
-
-/**
- * is_multicast_ether_addr - Determine if the Ethernet address is a multicast.
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Return true if the address is a multicast address.
- * By definition the broadcast address is also a multicast address.
- */
-static inline int is_multicast_ether_addr(const u8 * addr)
-{
- return (0x01 & addr[0]);
-}
-
-/**
- * is_valid_ether_addr - Determine if the given Ethernet address is valid
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
- * a multicast address, and is not FF:FF:FF:FF:FF:FF.
- *
- * Return true if the address is valid.
- */
-static inline int is_valid_ether_addr(const u8 * addr)
-{
- /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
- * explicitly check for it here. */
- return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
-}
diff --git a/board/esd/du440/Makefile b/board/esd/du440/Makefile
new file mode 100644
index 0000000..e996a0a
--- /dev/null
+++ b/board/esd/du440/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/esd/du440/config.mk b/board/esd/du440/config.mk
new file mode 100644
index 0000000..5164334
--- /dev/null
+++ b/board/esd/du440/config.mk
@@ -0,0 +1,37 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
new file mode 100644
index 0000000..ceb128c
--- /dev/null
+++ b/board/esd/du440/du440.c
@@ -0,0 +1,1018 @@
+/*
+ * (C) Copyright 2008
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <command.h>
+#include <i2c.h>
+#include <ppc440.h>
+#include "du440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+extern ulong flash_get_size (ulong base, int banknum);
+
+int usbhub_init(void);
+int dvi_init(void);
+int eeprom_write_enable (unsigned dev_addr, int state);
+int board_revision(void);
+
+static int du440_post_errors;
+
+int board_early_init_f(void)
+{
+ u32 sdr0_cust0;
+ u32 sdr0_pfc1, sdr0_pfc2;
+ u32 reg;
+
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xb8400000);
+
+ /*
+ * Setup the GPIO pins
+ */
+ out_be32((void*)GPIO0_OR, 0x00000000 | CFG_GPIO0_EP_EEP);
+ out_be32((void*)GPIO0_TCR, 0x0000000f | CFG_GPIO0_EP_EEP);
+ out_be32((void*)GPIO0_OSRL, 0x50055400);
+ out_be32((void*)GPIO0_OSRH, 0x550050aa);
+ out_be32((void*)GPIO0_TSRL, 0x50055400);
+ out_be32((void*)GPIO0_TSRH, 0x55005000);
+ out_be32((void*)GPIO0_ISR1L, 0x50000000);
+ out_be32((void*)GPIO0_ISR1H, 0x00000000);
+ out_be32((void*)GPIO0_ISR2L, 0x00000000);
+ out_be32((void*)GPIO0_ISR2H, 0x00000100);
+ out_be32((void*)GPIO0_ISR3L, 0x00000000);
+ out_be32((void*)GPIO0_ISR3H, 0x00000000);
+
+ out_be32((void*)GPIO1_OR, 0x00000000);
+ out_be32((void*)GPIO1_TCR, 0xc2000000 |
+ CFG_GPIO1_IORSTN |
+ CFG_GPIO1_LEDUSR1 |
+ CFG_GPIO1_LEDUSR2 |
+ CFG_GPIO1_LEDPOST |
+ CFG_GPIO1_LEDDU);
+ out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU);
+
+ out_be32((void*)GPIO1_OSRL, 0x5c280000);
+ out_be32((void*)GPIO1_OSRH, 0x00000000);
+ out_be32((void*)GPIO1_TSRL, 0x0c000000);
+ out_be32((void*)GPIO1_TSRH, 0x00000000);
+ out_be32((void*)GPIO1_ISR1L, 0x00005550);
+ out_be32((void*)GPIO1_ISR1H, 0x00000000);
+ out_be32((void*)GPIO1_ISR2L, 0x00050000);
+ out_be32((void*)GPIO1_ISR2H, 0x00000000);
+ out_be32((void*)GPIO1_ISR3L, 0x01400000);
+ out_be32((void*)GPIO1_ISR3H, 0x00000000);
+
+ /*
+ * Setup the interrupt controller polarities, triggers, etc.
+ */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ /*
+ * UIC1:
+ * bit30: ext. Irq 1: PLD : int 32+30
+ */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xfffffffd);
+ mtdcr(uic1tr, 0x00000000);
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ /*
+ * UIC2
+ * bit3: ext. Irq 2: DCF77 : int 64+3
+ */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ /* select Ethernet pins */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ mfsdr(SDR0_PFC2, sdr0_pfc2);
+
+ /* setup EMAC bridge interface */
+ if (board_revision() == 0) {
+ /* 1 x MII */
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+ SDR0_PFC1_SELECT_CONFIG_1_2;
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+ SDR0_PFC2_SELECT_CONFIG_1_2;
+ } else {
+ /* 2 x SMII */
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+ SDR0_PFC1_SELECT_CONFIG_6;
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+ SDR0_PFC2_SELECT_CONFIG_6;
+ }
+
+ /* enable 2nd IIC */
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
+
+ mtsdr(SDR0_PFC2, sdr0_pfc2);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /* PCI arbiter enabled */
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg);
+
+ /* setup NAND FLASH */
+ mfsdr(SDR0_CUST0, sdr0_cust0);
+ sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
+ SDR0_CUST0_NDFC_ENABLE |
+ SDR0_CUST0_NDFC_BW_8_BIT |
+ SDR0_CUST0_NDFC_ARE_MASK |
+ (0x80000000 >> (28 + CFG_NAND0_CS)) |
+ (0x80000000 >> (28 + CFG_NAND1_CS));
+ mtsdr(SDR0_CUST0, sdr0_cust0);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ uint pbcr;
+ int size_val = 0;
+ u32 reg;
+ unsigned long usb2d0cr = 0;
+ unsigned long usb2phy0cr, usb2h0cr = 0;
+ unsigned long sdr0_pfc1;
+ int i, j;
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ size_val = ffs(gd->bd->bi_flashsize) - 21;
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+ mtdcr(ebccfga, pb0cr);
+ mtdcr(ebccfgd, pbcr);
+
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size(gd->bd->bi_flashstart, 0);
+
+ /*
+ * USB suff...
+ */
+ /* SDR Setting */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
+
+ /* An 8-bit/60MHz interface is the only possible alternative
+ when connecting the Device to the PHY */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
+
+ /* To enable the USB 2.0 Device function through the UTMI interface */
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
+
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ /* clear resets */
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Host(int phy)\n");
+
+ /*
+ * Clear PLB4A0_ACR[WRP]
+ * This fix will make the MAL burst disabling patch for the Linux
+ * EMAC driver obsolete.
+ */
+ reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+ mtdcr(plb4_acr, reg);
+
+ /*
+ * release IO-RST#
+ * We have to wait at least 560ms until we may call usbhub_init
+ */
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_IORSTN);
+
+ /*
+ * flash USR1/2 LEDs (600ms)
+ * This results in the necessary delay from IORST# until
+ * calling usbhub_init will succeed
+ */
+ for (j = 0; j < 3; j++) {
+ out_be32((void*)GPIO1_OR,
+ (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR2) |
+ CFG_GPIO1_LEDUSR1);
+
+ for (i = 0; i < 100; i++)
+ udelay(1000);
+
+ out_be32((void*)GPIO1_OR,
+ (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR1) |
+ CFG_GPIO1_LEDUSR2);
+
+ for (i = 0; i < 100; i++)
+ udelay(1000);
+ }
+
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) &
+ ~(CFG_GPIO1_LEDUSR1 | CFG_GPIO1_LEDUSR2));
+
+ if (usbhub_init())
+ du440_post_errors++;
+
+ if (dvi_init())
+ du440_post_errors++;
+
+ return 0;
+}
+
+int pld_revision(void)
+{
+ out8(CFG_CPLD_BASE, 0x00);
+ return (int)(in8(CFG_CPLD_BASE) & CPLD_VERSION_MASK);
+}
+
+int board_revision(void)
+{
+ int rpins = (int)((in_be32((void*)GPIO1_IR) & CFG_GPIO1_HWVER_MASK)
+ >> CFG_GPIO1_HWVER_SHIFT);
+
+ return ((rpins & 1) << 3) | ((rpins & 2) << 1) |
+ ((rpins & 4) >> 1) | ((rpins & 8) >> 3);
+}
+
+#if defined(CONFIG_SHOW_ACTIVITY)
+void board_show_activity (ulong timestamp)
+{
+ if ((timestamp % 100) == 0)
+ out_be32((void*)GPIO1_OR,
+ in_be32((void*)GPIO1_OR) ^ CFG_GPIO1_LEDUSR1);
+}
+
+void show_activity(int arg)
+{
+}
+#endif /* CONFIG_SHOW_ACTIVITY */
+
+int du440_phy_addr(int devnum)
+{
+ if (board_revision() == 0)
+ return devnum;
+
+ return devnum + 1;
+}
+
+int checkboard(void)
+{
+ char serno[32];
+
+ puts("Board: DU440");
+
+ if (getenv_r("serial#", serno, sizeof(serno)) > 0) {
+ puts(", serial# ");
+ puts(serno);
+ }
+
+ printf(", HW-Rev. 1.%d, CPLD-Rev. 1.%d\n",
+ board_revision(), pld_revision());
+ return (0);
+}
+
+/*
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long addr;
+
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*
+ * Set Nebula PLB4 arbiter to fair mode.
+ */
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*
+ * Set up Direct MMIO registers
+ */
+ /*
+ * PowerPC440EPX PCI Master configuration.
+ * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ * PLB address 0xA0000000-0xDFFFFFFF
+ * ==> PCI address 0xA0000000-0xDFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ * Make this region non-prefetchable.
+ */
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
+ /* - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */
+ /* and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */
+ /* - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */
+ /* and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*
+ * Set up Configuration registers
+ */
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ PCI_VENDOR_ID_ESDGMBH);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, PCI_DEVICE_ID_DU440);
+
+ pci_write_config_word(0, PCI_CLASS_SUB_CODE, PCI_CLASS_BRIDGE_HOST);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ */
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+int last_stage_init(void)
+{
+ int e, i;
+
+ /* everyting is ok: turn on POST-LED */
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+
+ /* slowly blink on errors and finally keep LED off */
+ for (e = 0; e < du440_post_errors; e++) {
+ out_be32((void*)GPIO1_OR,
+ in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+
+ for (i = 0; i < 500; i++)
+ udelay(1000);
+
+ out_be32((void*)GPIO1_OR,
+ in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDPOST);
+
+ for (i = 0; i < 500; i++)
+ udelay(1000);
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * read field strength from I2C ADC
+ */
+int dcf77_status(void)
+{
+ unsigned int oldbus;
+ uchar u[2];
+ int mv;
+
+ oldbus = I2C_GET_BUS();
+ I2C_SET_BUS(1);
+
+ if (i2c_read (IIC1_MCP3021_ADDR, 0, 0, u, 2)) {
+ I2C_SET_BUS(oldbus);
+ return -1;
+ }
+
+ mv = (int)(((u[0] << 8) | u[1]) >> 2) * 3300 / 1024;
+
+ I2C_SET_BUS(oldbus);
+ return mv;
+}
+
+int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int mv;
+ u32 pin, pinold;
+ unsigned long long t1, t2;
+ bd_t *bd = gd->bd;
+
+ printf("DCF77: ");
+ mv = dcf77_status();
+ if (mv > 0)
+ printf("signal=%d mV\n", mv);
+ else
+ printf("ERROR - no signal\n");
+
+ t1 = t2 = 0;
+ pinold = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+ while (!ctrlc()) {
+ pin = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+ if (pin && !pinold) { /* bit start */
+ t1 = get_ticks();
+ if (t2 && ((unsigned int)(t1 - t2) /
+ (bd->bi_procfreq / 1000) >= 1800))
+ printf("Start of minute\n");
+
+ t2 = t1;
+ }
+ if (t1 && !pin && pinold) { /* bit end */
+ printf("%5d\n", (unsigned int)(get_ticks() - t1) /
+ (bd->bi_procfreq / 1000));
+ }
+ pinold = pin;
+ }
+
+ printf("Abort\n");
+ return 0;
+}
+U_BOOT_CMD(
+ dcf77, 1, 1, do_dcf77,
+ "dcf77 - Check DCF77 receiver\n",
+ NULL
+ );
+
+/*
+ * initialize USB hub via I2C1
+ */
+int usbhub_init(void)
+{
+ int reg;
+ int ret = 0;
+ unsigned int oldbus;
+ uchar u[] = {0x04, 0x24, 0x04, 0x07, 0x25, 0x00, 0x00, 0xd3,
+ 0x18, 0xe0, 0x00, 0x00, 0x01, 0x64, 0x01, 0x64,
+ 0x32};
+ uchar stcd;
+
+ printf("Hub: ");
+
+ oldbus = I2C_GET_BUS();
+ I2C_SET_BUS(1);
+
+ for (reg = 0; reg < sizeof(u); reg++)
+ if (i2c_write (IIC1_USB2507_ADDR, reg, 1, &u[reg], 1)) {
+ ret = -1;
+ break;
+ }
+
+ if (ret == 0) {
+ stcd = 0x03;
+ if (i2c_write (IIC1_USB2507_ADDR, 0, 1, &stcd, 1))
+ ret = -1;
+ }
+
+ if (ret == 0)
+ printf("initialized\n");
+ else
+ printf("failed - cannot initialize USB hub\n");
+
+ I2C_SET_BUS(oldbus);
+ return ret;
+}
+
+int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ usbhub_init();
+ return 0;
+}
+U_BOOT_CMD(
+ hubinit, 1, 1, do_hubinit,
+ "hubinit - Initialize USB hub\n",
+ NULL
+ );
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+int boot_eeprom_write (unsigned dev_addr,
+ unsigned offset,
+ uchar *buffer,
+ unsigned cnt)
+{
+ unsigned end = offset + cnt;
+ unsigned blk_off;
+ int rcode = 0;
+
+#if defined(CFG_EEPROM_WREN)
+ eeprom_write_enable(dev_addr, 1);
+#endif
+ /*
+ * Write data until done or would cross a write page boundary.
+ * We must write the address again when changing pages
+ * because the address counter only increments within a page.
+ */
+
+ while (offset < end) {
+ unsigned alen, len;
+ unsigned maxlen;
+
+ uchar addr[2];
+
+ blk_off = offset & 0xFF; /* block offset */
+
+ addr[0] = offset >> 8; /* block number */
+ addr[1] = blk_off; /* block offset */
+ alen = 2;
+ addr[0] |= dev_addr; /* insert device address */
+
+ len = end - offset;
+
+ /*
+ * For a FRAM device there is no limit on the number of the
+ * bytes that can be ccessed with the single read or write
+ * operation.
+ */
+#if defined(CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+
+#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
+
+ maxlen = BOOT_EEPROM_PAGE_SIZE -
+ BOOT_EEPROM_PAGE_OFFSET(blk_off);
+#else
+ maxlen = 0x100 - blk_off;
+#endif
+ if (maxlen > I2C_RXTX_LEN)
+ maxlen = I2C_RXTX_LEN;
+
+ if (len > maxlen)
+ len = maxlen;
+
+ if (i2c_write (addr[0], offset, alen - 1, buffer, len) != 0)
+ rcode = 1;
+
+ buffer += len;
+ offset += len;
+
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+ }
+#if defined(CFG_EEPROM_WREN)
+ eeprom_write_enable(dev_addr, 0);
+#endif
+ return rcode;
+}
+
+int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong sdsdp[4];
+
+ if (argc > 1) {
+ if (!strcmp(argv[1], "533")) {
+ printf("Bootstrapping for 533MHz\n");
+ sdsdp[0] = 0x87788252;
+ /* PLB-PCI-divider = 3 : sync PCI clock=44MHz */
+ sdsdp[1] = 0x095fa030;
+ sdsdp[2] = 0x40082350;
+ sdsdp[3] = 0x0d050000;
+ } else if (!strcmp(argv[1], "533-66")) {
+ printf("Bootstrapping for 533MHz (66MHz PCI)\n");
+ sdsdp[0] = 0x87788252;
+ /* PLB-PCI-divider = 2 : sync PCI clock=66MHz */
+ sdsdp[1] = 0x0957a030;
+ sdsdp[2] = 0x40082350;
+ sdsdp[3] = 0x0d050000;
+ } else if (!strcmp(argv[1], "667")) {
+ printf("Bootstrapping for 667MHz\n");
+ sdsdp[0] = 0x8778a256;
+ /* PLB-PCI-divider = 4 : sync PCI clock=33MHz */
+ sdsdp[1] = 0x0947a030;
+ /* PLB-PCI-divider = 3 : sync PCI clock=44MHz
+ * -> not working when overclocking 533MHz chips
+ * -> untested on 667MHz chips */
+ /* sdsdp[1]=0x095fa030; */
+ sdsdp[2] = 0x40082350;
+ sdsdp[3] = 0x0d050000;
+ }
+ } else {
+ printf("Bootstrapping for 533MHz (default)\n");
+ sdsdp[0] = 0x87788252;
+ /* PLB-PCI-divider = 3 : sync PCI clock=44MHz */
+ sdsdp[1] = 0x095fa030;
+ sdsdp[2] = 0x40082350;
+ sdsdp[3] = 0x0d050000;
+ }
+
+ printf("Writing boot EEPROM ...\n");
+ if (boot_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+ 0, (uchar*)sdsdp, 16) != 0)
+ printf("boot_eeprom_write failed\n");
+ else
+ printf("done (dump via 'i2c md 52 0.1 10')\n");
+
+ return 0;
+}
+U_BOOT_CMD(
+ sbe, 2, 0, do_setup_boot_eeprom,
+ "sbe - setup boot eeprom\n",
+ NULL
+ );
+
+#if defined(CFG_EEPROM_WREN)
+/*
+ * Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+ if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
+ (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr))
+ return -1;
+ else {
+ switch (state) {
+ case 1:
+ /* Enable write access, clear bit GPIO_SINT2. */
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) & ~CFG_GPIO0_EP_EEP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access, set bit GPIO_SINT2. */
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) | CFG_GPIO0_EP_EEP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in_be32((void*)GPIO0_OR) &
+ CFG_GPIO0_EP_EEP));
+ break;
+ }
+ }
+ return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int query = argc == 1;
+ int state = 0;
+
+ if (query) {
+ /* Query write access state. */
+ state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+ if (state < 0)
+ puts ("Query of write access state failed.\n");
+ else {
+ printf ("Write access for device 0x%0x is %sabled.\n",
+ CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ state = 0;
+ }
+ } else {
+ if ('0' == argv[1][0]) {
+ /* Disable write access. */
+ state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+ } else {
+ /* Enable write access. */
+ state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+ }
+ if (state < 0)
+ puts ("Setup of write access state failed.\n");
+ }
+
+ return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+ "eepwren - Enable / disable / query EEPROM write access\n",
+ NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+static int got_pldirq;
+
+static int pld_interrupt(u32 arg)
+{
+ int rc = -1; /* not for us */
+ u8 status = in8(CFG_CPLD_BASE);
+
+ /* check for PLD interrupt */
+ if (status & PWR_INT_FLAG) {
+ /* reset this int */
+ out8(CFG_CPLD_BASE, 0);
+ rc = 0;
+ got_pldirq = 1; /* trigger backend */
+ }
+
+ return rc;
+}
+
+int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ got_pldirq = 0;
+
+ /* clear any pending interrupt */
+ out8(CFG_CPLD_BASE, 0);
+
+ irq_install_handler(CPLD_IRQ,
+ (interrupt_handler_t *)pld_interrupt, 0);
+
+ printf("Waiting ...\n");
+ while(!got_pldirq) {
+ /* Abort if ctrl-c was pressed */
+ if (ctrlc()) {
+ puts("\nAbort\n");
+ break;
+ }
+ }
+ if (got_pldirq) {
+ printf("Got interrupt!\n");
+ printf("Power %sready!\n",
+ in8(CFG_CPLD_BASE) & PWR_RDY ? "":"NOT ");
+ }
+
+ irq_free_handler(CPLD_IRQ);
+ return 0;
+}
+U_BOOT_CMD(
+ wpi, 1, 1, do_waitpwrirq,
+ "wpi - Wait for power change interrupt\n",
+ NULL
+ );
+
+/*
+ * initialize DVI panellink transmitter
+ */
+int dvi_init(void)
+{
+ int i;
+ int ret = 0;
+ unsigned int oldbus;
+ uchar u[] = {0x08, 0x34,
+ 0x09, 0x20,
+ 0x0a, 0x90,
+ 0x0c, 0x89,
+ 0x08, 0x35};
+
+ printf("DVI: ");
+
+ oldbus = I2C_GET_BUS();
+ I2C_SET_BUS(0);
+
+ for (i = 0; i < sizeof(u); i += 2)
+ if (i2c_write (0x38, u[i], 1, &u[i + 1], 1)) {
+ ret = -1;
+ break;
+ }
+
+ if (ret == 0)
+ printf("initialized\n");
+ else
+ printf("failed - cannot initialize DVI transmitter\n");
+
+ I2C_SET_BUS(oldbus);
+ return ret;
+}
+
+int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ dvi_init();
+ return 0;
+}
+U_BOOT_CMD(
+ dviinit, 1, 1, do_dviinit,
+ "dviinit - Initialize DVI Panellink transmitter\n",
+ NULL
+ );
+
+/*
+ * TODO: 'time' command might be useful for others as well.
+ * Move to 'common' directory.
+ */
+int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned long long start, end;
+ char c, cmd[CFG_CBSIZE];
+ char *p, *d = cmd;
+ int ret, i;
+ ulong us;
+
+ for (i = 1; i < argc; i++) {
+ p = argv[i];
+
+ if (i > 1)
+ *d++ = ' ';
+
+ while ((c = *p++) != '\0') {
+ *d++ = c;
+ }
+ }
+ *d = '\0';
+
+ start = get_ticks();
+ ret = run_command (cmd, 0);
+ end = get_ticks();
+
+ printf("ticks=%d\n", (ulong)(end - start));
+ us = (ulong)((1000L * (end - start)) / (get_tbclk() / 1000));
+ printf("usec=%d\n", us);
+
+ return ret;
+}
+U_BOOT_CMD(
+ time, CFG_MAXARGS, 1, do_time,
+ "time - run command and output execution time\n",
+ NULL
+ );
+
+extern void video_hw_rectfill (
+ unsigned int bpp, /* bytes per pixel */
+ unsigned int dst_x, /* dest pos x */
+ unsigned int dst_y, /* dest pos y */
+ unsigned int dim_x, /* frame width */
+ unsigned int dim_y, /* frame height */
+ unsigned int color /* fill color */
+ );
+
+/*
+ * graphics demo
+ * draw rectangles using pseudorandom number generator
+ * (see http://www.embedded.com/columns/technicalinsights/20900500)
+ */
+unsigned int rprime = 9972;
+static unsigned int r;
+static unsigned int Y;
+
+unsigned int prng(unsigned int max)
+{
+ if (r == 0 || r == 1 || r == -1)
+ r = rprime; /* keep from getting stuck */
+
+ r = (9973 * ~r) + ((Y) % 701); /* the actual algorithm */
+ Y = (r >> 16) % max; /* choose upper bits and reduce */
+ return Y;
+}
+
+int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned int color;
+ unsigned int x, y, dx, dy;
+
+ while (!ctrlc()) {
+ x = prng(1280 - 1);
+ y = prng(1024 - 1);
+ dx = prng(1280- x - 1);
+ dy = prng(1024 - y - 1);
+ color = prng(0x10000);
+ video_hw_rectfill(2, x, y, dx, dy, color);
+ }
+
+ return 0;
+}
+U_BOOT_CMD(
+ gfxdemo, CFG_MAXARGS, 1, do_gfxdemo,
+ "gfxdemo - demo\n",
+ NULL
+ );
diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h
new file mode 100644
index 0000000..5c362e4
--- /dev/null
+++ b/board/esd/du440/du440.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2008
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDR0_USB0 0x0320 /* USB Control Register */
+
+#define CFG_GPIO0_EP_EEP (0x80000000 >> 23) /* GPIO0_23 */
+#define CFG_GPIO1_DCF77 (0x80000000 >> (42-32)) /* GPIO1_42 */
+
+#define CFG_GPIO1_IORSTN (0x80000000 >> (55-32)) /* GPIO1_55 */
+
+#define CFG_GPIO1_HWVER_MASK 0x000000f0 /* GPIO1_56-59 */
+#define CFG_GPIO1_HWVER_SHIFT 4
+#define CFG_GPIO1_LEDUSR1 0x00000008 /* GPIO1_60 */
+#define CFG_GPIO1_LEDUSR2 0x00000004 /* GPIO1_61 */
+#define CFG_GPIO1_LEDPOST 0x00000002 /* GPIO1_62 */
+#define CFG_GPIO1_LEDDU 0x00000001 /* GPIO1_63 */
+
+#define CPLD_VERSION_MASK 0x0f
+#define PWR_INT_FLAG 0x80
+#define PWR_RDY 0x10
+
+#define CPLD_IRQ (32+30)
+
+#define PCI_VENDOR_ID_ESDGMBH 0x12fe
+#define PCI_DEVICE_ID_DU440 0x0444
diff --git a/board/esd/du440/init.S b/board/esd/du440/init.S
new file mode 100644
index 0000000..4390b50
--- /dev/null
+++ b/board/esd/du440/init.S
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2008
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
+#include <config.h>
+
+/*
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ */
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+ /* TLB-entry for PCI Memory */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+ /* TLB-entry for PCI IO */
+ tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
+
+ /* TLB-entries for EBC: CPLD, DUMEM, DUIO */
+ tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for NAND */
+ tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for Internal Registers & OCM */
+ tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
+
+ /* TLB-entry PCI registers */
+ tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for peripherals */
+ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbtab_end
diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds
new file mode 100644
index 0000000..e140737
--- /dev/null
+++ b/board/esd/du440/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 9cee9f1..6665e7f 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -29,14 +29,13 @@
LIB = $(obj)lib$(VENDOR).a
-COBJS := sys_eeprom.o \
- pixis.o \
- pq-mds-pib.o \
- fsl_logo_bmp.o \
- fsl_diu_fb.o
+COBJS-${CONFIG_PQ_MDS_PIB} += pq-mds-pib.o
+COBJS-${CONFIG_ID_EEPROM} += sys_eeprom.o
+COBJS-${CONFIG_FSL_DIU_FB} += fsl_diu_fb.o fsl_logo_bmp.o
+COBJS-${CONFIG_FSL_PIXIS} += pixis.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c
index 5a8576e..2336f6b 100644
--- a/board/freescale/common/fsl_diu_fb.c
+++ b/board/freescale/common/fsl_diu_fb.c
@@ -27,8 +27,6 @@
#include <i2c.h>
#include <malloc.h>
-#ifdef CONFIG_FSL_DIU_FB
-
#include "fsl_diu_fb.h"
#ifdef DEBUG
@@ -615,4 +613,3 @@
memset(info->screen_base, 0, info->smem_len);
}
-#endif /* CONFIG_FSL_DIU_FB */
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index 45dcf4d..bff6a82 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -25,9 +25,8 @@
#include <common.h>
#include <command.h>
#include <watchdog.h>
-
-#ifdef CONFIG_FSL_PIXIS
#include <asm/cache.h>
+
#include "pixis.h"
@@ -184,7 +183,7 @@
void read_from_px_regs(int set)
{
- u8 mask = 0x1C;
+ u8 mask = 0x1C; /* COREPLL, MPXPLL, SYSCLK controlled by PIXIS */
u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN0);
if (set)
@@ -197,7 +196,7 @@
void read_from_px_regs_altbank(int set)
{
- u8 mask = 0x04;
+ u8 mask = 0x04; /* FLASHBANK and FLASHMAP controlled by PIXIS */
u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN1);
if (set)
@@ -208,15 +207,26 @@
}
#ifndef CFG_PIXIS_VBOOT_MASK
-#define CFG_PIXIS_VBOOT_MASK 0x40
+#define CFG_PIXIS_VBOOT_MASK (0x40)
#endif
+void clear_altbank(void)
+{
+ u8 tmp;
+
+ tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
+ tmp &= ~CFG_PIXIS_VBOOT_MASK;
+
+ out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
+}
+
+
void set_altbank(void)
{
u8 tmp;
tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
- tmp ^= CFG_PIXIS_VBOOT_MASK;
+ tmp |= CFG_PIXIS_VBOOT_MASK;
out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
}
@@ -227,11 +237,11 @@
u8 tmp;
tmp = in8(PIXIS_BASE + PIXIS_VCTL);
- tmp = tmp & 0x1E;
+ tmp = tmp & 0x1E; /* clear GO bit */
out8(PIXIS_BASE + PIXIS_VCTL, tmp);
tmp = in8(PIXIS_BASE + PIXIS_VCTL);
- tmp = tmp | 0x01;
+ tmp = tmp | 0x01; /* set GO bit - start reset sequencer */
out8(PIXIS_BASE + PIXIS_VCTL, tmp);
}
@@ -293,7 +303,7 @@
* simply create the intarr.
*/
i = 0;
- while (strptr[i] != 46) {
+ while (strptr[i] != '.') {
if (strptr[i] == 0) {
no_dec = 1;
break;
@@ -313,7 +323,7 @@
} else {
j = 0;
i++; /* Skipping the decimal point */
- while ((strptr[i] > 47) && (strptr[i] < 58)) {
+ while ((strptr[i] >= '0') && (strptr[i] <= '9')) {
decarr[j] = strptr[i];
i++;
j++;
@@ -340,8 +350,14 @@
int
pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- ulong val;
- ulong corepll;
+ unsigned int i;
+ char *p_cf = NULL;
+ char *p_cf_sysclk = NULL;
+ char *p_cf_corepll = NULL;
+ char *p_cf_mpxpll = NULL;
+ char *p_altbank = NULL;
+ char *p_wd = NULL;
+ unsigned int unknown_param = 0;
/*
* No args is a simple reset request.
@@ -351,116 +367,97 @@
/* not reached */
}
- if (strcmp(argv[1], "cf") == 0) {
-
- /*
- * Reset with frequency changed:
- * cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
- */
- if (argc < 5) {
- puts(cmdtp->usage);
- return 1;
+ for (i = 1; i < argc; i++) {
+ if (strcmp(argv[i], "cf") == 0) {
+ p_cf = argv[i];
+ if (i + 3 >= argc) {
+ break;
+ }
+ p_cf_sysclk = argv[i+1];
+ p_cf_corepll = argv[i+2];
+ p_cf_mpxpll = argv[i+3];
+ i += 3;
+ continue;
}
- read_from_px_regs(0);
-
- val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
+ if (strcmp(argv[i], "altbank") == 0) {
+ p_altbank = argv[i];
+ continue;
+ }
- corepll = strfractoint((uchar *)argv[3]);
- val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
- if (val == 3) {
- puts("Setting registers VCFGEN0 and VCTL\n");
- read_from_px_regs(1);
- puts("Resetting board with values from ");
- puts("VSPEED0, VSPEED1, VCLKH, and VCLKL \n");
- set_px_go();
- } else {
- puts(cmdtp->usage);
- return 1;
+ if (strcmp(argv[i], "wd") == 0) {
+ p_wd = argv[i];
+ continue;
}
- while (1) ; /* Not reached */
+ unknown_param = 1;
+ }
- } else if (strcmp(argv[1], "altbank") == 0) {
+ /*
+ * Check that cf has all required parms
+ */
+ if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
+ || unknown_param) {
+ puts(cmdtp->help);
+ return 1;
+ }
- /*
- * Reset using alternate flash bank:
- */
- if (argv[2] == 0) {
- /*
- * Reset from alternate bank without changing
- * frequency and without watchdog timer enabled.
- * altbank
- */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- if (argc > 2) {
- puts(cmdtp->usage);
- return 1;
- }
- puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs_altbank(1);
- puts("Resetting board to boot from the other bank.\n");
- set_px_go();
+ /*
+ * PIXIS seems to be sensitive to the ordering of
+ * the registers that are touched.
+ */
+ read_from_px_regs(0);
- } else if (strcmp(argv[2], "cf") == 0) {
- /*
- * Reset with frequency changed
- * altbank cf <SYSCLK freq> <COREPLL ratio>
- * <MPXPLL ratio>
- */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
- corepll = strfractoint((uchar *)argv[4]);
- val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[5],
- NULL, 10));
- if (val == 3) {
- puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs(1);
- read_from_px_regs_altbank(1);
- puts("Enabling watchdog timer on the FPGA\n");
- puts("Resetting board with values from ");
- puts("VSPEED0, VSPEED1, VCLKH and VCLKL ");
- puts("to boot from the other bank.\n");
- set_px_go_with_watchdog();
- } else {
- puts(cmdtp->usage);
- return 1;
- }
+ if (p_altbank) {
+ read_from_px_regs_altbank(0);
+ }
+ clear_altbank();
- while (1) ; /* Not reached */
+ /*
+ * Clock configuration specified.
+ */
+ if (p_cf) {
+ unsigned long sysclk;
+ unsigned long corepll;
+ unsigned long mpxpll;
- } else if (strcmp(argv[2], "wd") == 0) {
- /*
- * Reset from alternate bank without changing
- * frequencies but with watchdog timer enabled:
- * altbank wd
- */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs_altbank(1);
- puts("Enabling watchdog timer on the FPGA\n");
- puts("Resetting board to boot from the other bank.\n");
- set_px_go_with_watchdog();
- while (1) ; /* Not reached */
+ sysclk = simple_strtoul(p_cf_sysclk, NULL, 10);
+ corepll = strfractoint((uchar *) p_cf_corepll);
+ mpxpll = simple_strtoul(p_cf_mpxpll, NULL, 10);
- } else {
- puts(cmdtp->usage);
+ if (!(set_px_sysclk(sysclk)
+ && set_px_corepll(corepll)
+ && set_px_mpxpll(mpxpll))) {
+ puts(cmdtp->help);
return 1;
}
+ read_from_px_regs(1);
+ }
+
+ /*
+ * Altbank specified
+ *
+ * NOTE CHANGE IN BEHAVIOR: previous code would default
+ * to enabling watchdog if altbank is specified.
+ * Now the watchdog must be enabled explicitly using 'wd'.
+ */
+ if (p_altbank) {
+ set_altbank();
+ read_from_px_regs_altbank(1);
+ }
+ /*
+ * Reset with watchdog specified.
+ */
+ if (p_wd) {
+ set_px_go_with_watchdog();
} else {
- puts(cmdtp->usage);
- return 1;
+ set_px_go();
}
+ /*
+ * Shouldn't be reached.
+ */
return 0;
}
@@ -474,4 +471,3 @@
" pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
" pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
);
-#endif /* CONFIG_FSL_PIXIS */
diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
index e4f96e8..6c72aa1 100644
--- a/board/freescale/common/pq-mds-pib.c
+++ b/board/freescale/common/pq-mds-pib.c
@@ -12,8 +12,6 @@
#include <i2c.h>
#include <asm/io.h>
-#ifdef CONFIG_PQ_MDS_PIB
-
#include "pq-mds-pib.h"
int pib_init(void)
@@ -102,4 +100,3 @@
i2c_set_bus_num(orig_i2c_bus);
return 0;
}
-#endif /* CONFIG_PQ_MDS_PIB */
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index 7bc663b..44c0978 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -27,18 +27,20 @@
#include <i2c.h>
#include <linux/ctype.h>
-#ifdef CFG_ID_EEPROM
typedef struct {
- unsigned char id[4]; /* 0x0000 - 0x0003 */
- unsigned char sn[12]; /* 0x0004 - 0x000F */
- unsigned char errata[5]; /* 0x0010 - 0x0014 */
- unsigned char date[7]; /* 0x0015 - 0x001a */
- unsigned char res_1[37]; /* 0x001b - 0x003f */
- unsigned char tab_size; /* 0x0040 */
- unsigned char tab_flag; /* 0x0041 */
- unsigned char mac[8][6]; /* 0x0042 - 0x0071 */
- unsigned char res_2[126]; /* 0x0072 - 0x00ef */
- unsigned int crc; /* 0x00f0 - 0x00f3 crc32 checksum */
+ u8 id[4]; /* 0x0000 - 0x0003 EEPROM Tag */
+ u8 sn[12]; /* 0x0004 - 0x000F Serial Number */
+ u8 errata[5]; /* 0x0010 - 0x0014 Errata Level */
+ u8 date[6]; /* 0x0015 - 0x001a Build Date */
+ u8 res_0; /* 0x001b Reserved */
+ u8 version[4]; /* 0x001c - 0x001f Version */
+ u8 tempcal[8]; /* 0x0020 - 0x0027 Temperature Calibration Factors*/
+ u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/
+ u8 res_1[22]; /* 0x0020 - 0x003f Reserved */
+ u8 mac_size; /* 0x0040 Mac table size */
+ u8 mac_flag; /* 0x0041 Mac table flags */
+ u8 mac[8][6]; /* 0x0042 - 0x0071 Mac addresses */
+ u32 crc; /* 0x0072 crc32 checksum */
} EEPROM_data;
static EEPROM_data mac_data;
@@ -46,28 +48,57 @@
int mac_show(void)
{
int i;
+ u8 mac_size;
unsigned char ethaddr[8][18];
+ unsigned char enetvar[32];
+
+ /* Show EEPROM tagID,
+ * always the four characters 'NXID'.
+ */
+ printf("ID ");
+ for (i = 0; i < 4; i++)
+ printf("%c", mac_data.id[i]);
+ printf("\n");
+
+ /* Show Serial number,
+ * 0 to 11 charaters of errata information.
+ */
+ printf("SN ");
+ for (i = 0; i < 12; i++)
+ printf("%c", mac_data.sn[i]);
+ printf("\n");
- printf("ID %c%c%c%c\n",
- mac_data.id[0],
- mac_data.id[1],
- mac_data.id[2],
- mac_data.id[3]);
- printf("Errata %c%c%c%c%c\n",
- mac_data.errata[0],
- mac_data.errata[1],
- mac_data.errata[2],
- mac_data.errata[3],
- mac_data.errata[4]);
- printf("Date %c%c%c%c%c%c%c\n",
+ /* Show Errata Level,
+ * 0 to 4 characters of errata information.
+ */
+ printf("Errata ");
+ for (i = 0; i < 5; i++)
+ printf("%c", mac_data.errata[i]);
+ printf("\n");
+
+ /* Show Build Date,
+ * BCD date values, as YYMMDDhhmmss.
+ */
+ printf("Date 20%02x\/%02x\/%02x %02x:%02x:%02x\n",
mac_data.date[0],
mac_data.date[1],
mac_data.date[2],
mac_data.date[3],
mac_data.date[4],
- mac_data.date[5],
- mac_data.date[6]);
- for (i = 0; i < 8; i++) {
+ mac_data.date[5]);
+
+ /* Show MAC table size,
+ * Value from 0 to 7 indicating how many MAC
+ * addresses are stored in the system EEPROM.
+ */
+ if((mac_data.mac_size > 0) && (mac_data.mac_size <= 8))
+ mac_size = mac_data.mac_size;
+ else
+ mac_size = 8; /* Set the max size */
+ printf("MACSIZE %x\n", mac_size);
+
+ /* Show Mac addresses */
+ for (i = 0; i < mac_size; i++) {
sprintf((char *)ethaddr[i],
"%02x:%02x:%02x:%02x:%02x:%02x",
mac_data.mac[i][0],
@@ -77,12 +108,12 @@
mac_data.mac[i][4],
mac_data.mac[i][5]);
printf("MAC %d %s\n", i, ethaddr[i]);
- }
- setenv("ethaddr", (char *)ethaddr[0]);
- setenv("eth1addr", (char *)ethaddr[1]);
- setenv("eth2addr", (char *)ethaddr[2]);
- setenv("eth3addr", (char *)ethaddr[3]);
+ sprintf((char *)enetvar,
+ i ? "eth%daddr" : "ethaddr", i);
+ setenv((char *)enetvar, (char *)ethaddr[i]);
+
+ }
return 0;
}
@@ -121,17 +152,14 @@
unsigned char dev = ID_EEPROM_ADDR, *ptr;
unsigned char *eeprom_data = (unsigned char *)(&mac_data);
- for (i = 0; i < sizeof(mac_data.res_1); i++)
- mac_data.res_1[i] = 0;
- for (i = 0; i < sizeof(mac_data.res_2); i++)
- mac_data.res_2[i] = 0;
+ mac_data.res_0 = 0;
+ memset((void *)mac_data.res_1, 0, sizeof(mac_data.res_1));
+
length = sizeof(EEPROM_data);
crc = crc32(crc, eeprom_data, length - 4);
mac_data.crc = crc;
for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) {
- ret =
- i2c_write(dev, i, 1, ptr,
- (length - i) < 8 ? (length - i) : 8);
+ ret = i2c_write(dev, i, 1, ptr, min((length - i),8));
udelay(5000); /* 5ms write cycle timing */
if (ret)
break;
@@ -180,12 +208,13 @@
}
break;
case 'd': /* date */
- for (i = 0; i < 7; i++) {
- mac_data.date[i] = argv[2][i];
+ mac_val = simple_strtoull(argv[2], NULL, 16);
+ for (i = 0; i < 6; i++) {
+ mac_data.date[i] = (mac_val >> (40 - 8 * i));
}
break;
- case 'p': /* number of ports */
- mac_data.tab_size =
+ case 'p': /* mac table size */
+ mac_data.mac_size =
(unsigned char)simple_strtoul(argv[2], NULL, 16);
break;
case '0': /* mac 0 */
@@ -253,4 +282,3 @@
}
return 0;
}
-#endif /* CFG_ID_EEPROM */
diff --git a/board/freescale/m52277evb/Makefile b/board/freescale/m52277evb/Makefile
new file mode 100644
index 0000000..981763d
--- /dev/null
+++ b/board/freescale/m52277evb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk
new file mode 100644
index 0000000..ce014ed
--- /dev/null
+++ b/board/freescale/m52277evb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c
new file mode 100644
index 0000000..98424c8
--- /dev/null
+++ b/board/freescale/m52277evb/m52277evb.c
@@ -0,0 +1,86 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale M52277 EVB\n");
+ return 0;
+};
+
+long int initdram(int board_type)
+{
+ volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
+ u32 dramsize, i;
+
+ dramsize = CFG_SDRAM_SIZE * 0x100000;
+
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+ i--;
+
+ sdram->sdcs0 = (CFG_SDRAM_BASE | i);
+
+ sdram->sdcfg1 = CFG_SDRAM_CFG1;
+ sdram->sdcfg2 = CFG_SDRAM_CFG2;
+
+ /* Issue PALL */
+ sdram->sdcr = CFG_SDRAM_CTRL | 2;
+
+ /* Issue LEMR */
+ /*sdram->sdmr = CFG_SDRAM_EMOD; */
+ sdram->sdmr = CFG_SDRAM_MODE;
+
+ udelay(1000);
+
+ /* Issue PALL */
+ sdram->sdcr = CFG_SDRAM_CTRL | 2;
+
+ /* Perform two refresh cycles */
+ sdram->sdcr = CFG_SDRAM_CTRL | 4;
+ sdram->sdcr = CFG_SDRAM_CTRL | 4;
+
+ sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+
+ udelay(100);
+
+ return (dramsize);
+};
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds
new file mode 100644
index 0000000..9125bfc
--- /dev/null
+++ b/board/freescale/m52277evb/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf5227x/start.o (.text)
+ cpu/mcf5227x/libmcf5227x.a (.text)
+ lib_m68k/libm68k.a (.text)
+ lib_generic/libgeneric.a (.text)
+ common/cmd_mem.o (.text)
+ common/main.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index fefb42e..344a614 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -63,10 +63,10 @@
nand_baseaddr |= CLR_ALE;
break;
case NAND_CTL_SETWP:
- fbcs->csmr2 |= CSMR_WP;
+ fbcs->csmr2 |= FBCS_CSMR_WP;
break;
case NAND_CTL_CLRWP:
- fbcs->csmr2 &= ~CSMR_WP;
+ fbcs->csmr2 &= ~FBCS_CSMR_WP;
break;
}
this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile
new file mode 100644
index 0000000..ab0f11e
--- /dev/null
+++ b/board/freescale/m5373evb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o mii.o nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/m5373evb/config.mk b/board/freescale/m5373evb/config.mk
new file mode 100644
index 0000000..ce014ed
--- /dev/null
+++ b/board/freescale/m5373evb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c
new file mode 100644
index 0000000..26b87b9
--- /dev/null
+++ b/board/freescale/m5373evb/m5373evb.c
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale FireEngine 5373 EVB\n");
+ return 0;
+};
+
+long int initdram(int board_type)
+{
+ volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ u32 dramsize, i;
+
+ dramsize = CFG_SDRAM_SIZE * 0x100000;
+
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+ i--;
+
+ sdram->cs0 = (CFG_SDRAM_BASE | i);
+ sdram->cfg1 = CFG_SDRAM_CFG1;
+ sdram->cfg2 = CFG_SDRAM_CFG2;
+
+ /* Issue PALL */
+ sdram->ctrl = CFG_SDRAM_CTRL | 2;
+
+ /* Issue LEMR */
+ sdram->mode = CFG_SDRAM_EMOD;
+ sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+
+ udelay(500);
+
+ /* Issue PALL */
+ sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+
+ /* Perform two refresh cycles */
+ sdram->ctrl = CFG_SDRAM_CTRL | 4;
+ sdram->ctrl = CFG_SDRAM_CTRL | 4;
+
+ sdram->mode = CFG_SDRAM_MODE;
+
+ sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+
+ udelay(100);
+
+ return dramsize;
+};
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c
new file mode 100644
index 0000000..8f6abf3
--- /dev/null
+++ b/board/freescale/m5373evb/mii.c
@@ -0,0 +1,306 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ if (setclear) {
+ gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
+ gpio->par_feci2c |=
+ GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
+ } else {
+ gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
+ gpio->par_feci2c &=
+ ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
+ }
+ return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
+#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
+
+#define STR_ID_LXT970 "LXT970"
+#define STR_ID_LXT971 "LXT971"
+#define STR_ID_82555 "Intel82555"
+#define STR_ID_QS6612 "QS6612"
+#define STR_ID_AMD79C784 "AMD79C784"
+#define STR_ID_LSI80225 "LSI80225"
+#define STR_ID_LSI80225B "LSI80225/B"
+#define STR_ID_DP83848VV "N83848"
+#define STR_ID_DP83849 "N83849"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+ volatile fec_t *fecp = (fec_t *) (info->miibase);
+ int i;
+
+ fecp->ecr = FEC_ECR_RESET;
+ for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf("FEC_RESET_DELAY timeout\n");
+ }
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ volatile fec_t *ep;
+ uint mii_reply;
+ int j = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ ep = (fec_t *) info->miibase;
+
+ ep->mmfr = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= MCFFEC_TOUT_LOOP) {
+ printf("MII not complete\n");
+ return -1;
+ }
+
+ mii_reply = ep->mmfr; /* result from phy */
+ ep->eir = FEC_EIR_MII; /* clear MII complete */
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ struct fec_info_s *info = dev->priv;
+ int phyaddr, pass;
+ uint phyno, phytype;
+
+ if (info->phyname_init)
+ return info->phy_addr;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |=
+ mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_DP83848VV:
+ strcpy(info->phy_name,
+ STR_ID_DP83848VV);
+ info->phyname_init = 1;
+ break;
+ default:
+ strcpy(info->phy_name, "unknown");
+ info->phyname_init = 1;
+ break;
+ }
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ", phyno, pass);
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_DP83848VV:
+ printf(STR_ID_DP83848VV);
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0)
+ printf("No PHY device found.\n");
+
+ return phyaddr;
+}
+#endif /* CFG_DISCOVER_PHY */
+
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
+
+void __mii_init(void)
+{
+ volatile fec_t *fecp;
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ int miispd = 0, i = 0;
+ u16 autoneg = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ fecp = (fec_t *) info->miibase;
+
+ fecpin_setclear(dev, 1);
+
+ mii_reset(info);
+
+ /* We use strictly polling mode only */
+ fecp->eimr = 0;
+
+ /* Clear any pending interrupt */
+ fecp->eir = 0xffffffff;
+
+ /* Set MII speed */
+ miispd = (gd->bus_clk / 1000000) / 5;
+ fecp->mscr = miispd << 1;
+
+ info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+ while (i < MCFFEC_TOUT_LOOP) {
+ autoneg = 0;
+ miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+ i++;
+
+ if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+ break;
+
+ udelay(500);
+ }
+ if (i >= MCFFEC_TOUT_LOOP) {
+ printf("Auto Negotiation not complete\n");
+ }
+
+ /* adapt to the half/full speed settings */
+ info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+ info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+
+#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c
new file mode 100644
index 0000000..344a614
--- /dev/null
+++ b/board/freescale/m5373evb/nand.c
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NAND)
+#include <nand.h>
+#include <linux/mtd/mtd.h>
+
+#define SET_CLE 0x10
+#define CLR_CLE ~SET_CLE
+#define SET_ALE 0x08
+#define CLR_ALE ~SET_ALE
+
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+ u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+
+ switch (cmd) {
+ case NAND_CTL_SETNCE:
+ case NAND_CTL_CLRNCE:
+ break;
+ case NAND_CTL_SETCLE:
+ nand_baseaddr |= SET_CLE;
+ break;
+ case NAND_CTL_CLRCLE:
+ nand_baseaddr &= CLR_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ nand_baseaddr |= SET_ALE;
+ break;
+ case NAND_CTL_CLRALE:
+ nand_baseaddr |= CLR_ALE;
+ break;
+ case NAND_CTL_SETWP:
+ fbcs->csmr2 |= FBCS_CSMR_WP;
+ break;
+ case NAND_CTL_CLRWP:
+ fbcs->csmr2 &= ~FBCS_CSMR_WP;
+ break;
+ }
+ this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
+}
+
+static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ *((volatile u8 *)(this->IO_ADDR_W)) = byte;
+}
+
+static u8 nand_read_byte(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ return (u8) (*((volatile u8 *)this->IO_ADDR_R));
+}
+
+static int nand_dev_ready(struct mtd_info *mtdinfo)
+{
+ return 1;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ *((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
+
+ /* set up pin configuration */
+ gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
+ gpio->pddr_timer |= 0x08;
+ gpio->ppd_timer |= 0x08;
+ gpio->pclrr_timer = 0;
+ gpio->podr_timer = 0;
+
+ nand->chip_delay = 50;
+ nand->eccmode = NAND_ECC_SOFT;
+ nand->hwcontrol = nand_hwcontrol;
+ nand->read_byte = nand_read_byte;
+ nand->write_byte = nand_write_byte;
+ nand->dev_ready = nand_dev_ready;
+
+ return 0;
+}
+#endif
diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds
new file mode 100644
index 0000000..9b994a0
--- /dev/null
+++ b/board/freescale/m5373evb/u-boot.lds
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf532x/start.o (.text)
+ lib_m68k/traps.o (.text)
+ lib_m68k/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
new file mode 100644
index 0000000..74c2528
--- /dev/null
+++ b/board/freescale/m547xevb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o mii.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/m547xevb/config.mk b/board/freescale/m547xevb/config.mk
new file mode 100644
index 0000000..fa66b75
--- /dev/null
+++ b/board/freescale/m547xevb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFF800000
diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c
new file mode 100644
index 0000000..0286084
--- /dev/null
+++ b/board/freescale/m547xevb/m547xevb.c
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <pci.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale FireEngine 5475 EVB\n");
+ return 0;
+};
+
+long int initdram(int board_type)
+{
+ volatile siu_t *siu = (siu_t *) (MMAP_SIU);
+ volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ u32 dramsize, i;
+
+ siu->drv = CFG_SDRAM_DRVSTRENGTH;
+
+ dramsize = CFG_DRAMSZ * 0x100000;
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+ i--;
+ siu->cs0cfg = (CFG_SDRAM_BASE | i);
+
+#ifdef CFG_DRAMSZ1
+ temp = CFG_DRAMSZ1 * 0x100000;
+ for (i = 0x13; i < 0x20; i++) {
+ if (temp == (1 << i))
+ break;
+ }
+ i--;
+ dramsize += temp;
+ siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i);
+#endif
+
+ sdram->cfg1 = CFG_SDRAM_CFG1;
+ sdram->cfg2 = CFG_SDRAM_CFG2;
+
+ /* Issue PALL */
+ sdram->ctrl = CFG_SDRAM_CTRL | 2;
+
+ /* Issue LEMR */
+ sdram->mode = CFG_SDRAM_EMOD;
+ sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+
+ udelay(500);
+
+ /* Issue PALL */
+ sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+
+ /* Perform two refresh cycles */
+ sdram->ctrl = CFG_SDRAM_CTRL | 4;
+ sdram->ctrl = CFG_SDRAM_CTRL | 4;
+
+ sdram->mode = CFG_SDRAM_MODE;
+
+ sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+
+ udelay(100);
+
+ return dramsize;
+};
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI devices, report devices found.
+ */
+static struct pci_controller hose;
+extern void pci_mcf547x_8x_init(struct pci_controller *hose);
+
+void pci_init_board(void)
+{
+ pci_mcf547x_8x_init(&hose);
+}
+#endif /* CONFIG_PCI */
diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c
new file mode 100644
index 0000000..5b2683b
--- /dev/null
+++ b/board/freescale/m547xevb/mii.c
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <net.h>
+
+#include <asm/immap.h>
+#include <asm/fec.h>
+#include <asm/fsl_mcdmafec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
+
+ if (setclear) {
+ if (info->iobase == CFG_FEC0_IOBASE)
+ gpio->par_feci2cirq |= 0xF000;
+ else
+ gpio->par_feci2cirq |= 0x0FC0;
+ } else {
+ if (info->iobase == CFG_FEC0_IOBASE)
+ gpio->par_feci2cirq &= 0x0FFF;
+ else
+ gpio->par_feci2cirq &= 0xF03F;
+ }
+ return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
+#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
+#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */
+
+#define STR_ID_LXT970 "LXT970"
+#define STR_ID_LXT971 "LXT971"
+#define STR_ID_82555 "Intel82555"
+#define STR_ID_QS6612 "QS6612"
+#define STR_ID_AMD79C784 "AMD79C784"
+#define STR_ID_LSI80225 "LSI80225"
+#define STR_ID_LSI80225B "LSI80225/B"
+#define STR_ID_DP83848VV "N83848"
+#define STR_ID_DP83849 "N83849"
+#define STR_ID_BCM5222 "BCM5222"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_dma *info)
+{
+ volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
+ int i;
+
+ fecp->ecr = FEC_ECR_RESET;
+ for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf("FEC_RESET_DELAY timeout\n");
+ }
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+ struct fec_info_dma *info;
+ struct eth_device *dev;
+ volatile fecdma_t *ep;
+ uint mii_reply;
+ int j = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ ep = (fecdma_t *) info->miibase;
+
+ ep->mmfr = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= MCFFEC_TOUT_LOOP) {
+ printf("MII not complete\n");
+ return -1;
+ }
+
+ mii_reply = ep->mmfr; /* result from phy */
+ ep->eir = FEC_EIR_MII; /* clear MII complete */
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ struct fec_info_dma *info = dev->priv;
+ int phyaddr, pass, temp;
+ uint phyno, phytype;
+
+ if (info->phyname_init) {
+ return info->phy_addr;
+ }
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+
+ temp = 0;
+ if (info->index > 0) {
+ /* Some phy have multiple address, to solve the issue
+ where phyno keeps starting from 0, check the
+ previous phy address if both miibase are the same. */
+ if (info->miibase == (info->next)->miibase) {
+ temp = (info->next)->phy_addr + 1;
+ }
+ }
+
+ for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
+
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |=
+ mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_BCM5222:
+ strcpy(info->phy_name, STR_ID_BCM5222);
+ info->phyname_init = 1;
+ break;
+ default:
+ strcpy(info->phy_name, "unknown");
+ info->phyname_init = 1;
+ break;
+ }
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ", phyno, pass);
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_BCM5222:
+ printf(STR_ID_BCM5222);
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0)
+ printf("No PHY device found.\n");
+
+ return phyaddr;
+}
+#endif /* CFG_DISCOVER_PHY */
+
+void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
+
+void __mii_init(void)
+{
+ volatile fecdma_t *fecp;
+ struct fec_info_dma *info;
+ struct eth_device *dev;
+ int miispd = 0, i = 0;
+ u16 autoneg = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ fecp = (fecdma_t *) info->miibase;
+
+ fecpin_setclear(dev, 1);
+
+ mii_reset(info);
+
+ /* We use strictly polling mode only */
+ fecp->eimr = 0;
+
+ /* Clear any pending interrupt */
+ fecp->eir = 0xffffffff;
+
+ /* Set MII speed */
+ miispd = (gd->bus_clk / 1000000) / 5;
+ fecp->mscr = miispd << 1;
+
+ info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+ while (i < MCFFEC_TOUT_LOOP) {
+ autoneg = 0;
+ miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+ i++;
+
+ if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+ break;
+
+ udelay(500);
+ }
+ if (i >= MCFFEC_TOUT_LOOP) {
+ printf("Auto Negotiation not complete\n");
+ }
+
+ /* adapt to the half/full speed settings */
+ info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+ info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+
+#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds
new file mode 100644
index 0000000..c10472a
--- /dev/null
+++ b/board/freescale/m547xevb/u-boot.lds
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf547x_8x/start.o (.text)
+ lib_m68k/traps.o (.text)
+ lib_m68k/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile
new file mode 100644
index 0000000..74c2528
--- /dev/null
+++ b/board/freescale/m548xevb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o mii.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/m548xevb/config.mk b/board/freescale/m548xevb/config.mk
new file mode 100644
index 0000000..fa66b75
--- /dev/null
+++ b/board/freescale/m548xevb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFF800000
diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c
new file mode 100644
index 0000000..0372807
--- /dev/null
+++ b/board/freescale/m548xevb/m548xevb.c
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <pci.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale FireEngine 5485 EVB\n");
+ return 0;
+};
+
+long int initdram(int board_type)
+{
+ volatile siu_t *siu = (siu_t *) (MMAP_SIU);
+ volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ u32 dramsize, i;
+
+ siu->drv = CFG_SDRAM_DRVSTRENGTH;
+
+ dramsize = CFG_DRAMSZ * 0x100000;
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+ i--;
+ siu->cs0cfg = (CFG_SDRAM_BASE | i);
+
+#ifdef CFG_DRAMSZ1
+ temp = CFG_DRAMSZ1 * 0x100000;
+ for (i = 0x13; i < 0x20; i++) {
+ if (temp == (1 << i))
+ break;
+ }
+ i--;
+ dramsize += temp;
+ siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i);
+#endif
+
+ sdram->cfg1 = CFG_SDRAM_CFG1;
+ sdram->cfg2 = CFG_SDRAM_CFG2;
+
+ /* Issue PALL */
+ sdram->ctrl = CFG_SDRAM_CTRL | 2;
+
+ /* Issue LEMR */
+ sdram->mode = CFG_SDRAM_EMOD;
+ sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+
+ udelay(500);
+
+ /* Issue PALL */
+ sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+
+ /* Perform two refresh cycles */
+ sdram->ctrl = CFG_SDRAM_CTRL | 4;
+ sdram->ctrl = CFG_SDRAM_CTRL | 4;
+
+ sdram->mode = CFG_SDRAM_MODE;
+
+ sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+
+ udelay(100);
+
+ return dramsize;
+};
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI devices, report devices found.
+ */
+static struct pci_controller hose;
+extern void pci_mcf547x_8x_init(struct pci_controller *hose);
+
+void pci_init_board(void)
+{
+ pci_mcf547x_8x_init(&hose);
+}
+#endif /* CONFIG_PCI */
diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c
new file mode 100644
index 0000000..5b2683b
--- /dev/null
+++ b/board/freescale/m548xevb/mii.c
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <net.h>
+
+#include <asm/immap.h>
+#include <asm/fec.h>
+#include <asm/fsl_mcdmafec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
+
+ if (setclear) {
+ if (info->iobase == CFG_FEC0_IOBASE)
+ gpio->par_feci2cirq |= 0xF000;
+ else
+ gpio->par_feci2cirq |= 0x0FC0;
+ } else {
+ if (info->iobase == CFG_FEC0_IOBASE)
+ gpio->par_feci2cirq &= 0x0FFF;
+ else
+ gpio->par_feci2cirq &= 0xF03F;
+ }
+ return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
+#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
+#define PHY_ID_BCM5222 0x00406322 /* Broadcom 5222 */
+
+#define STR_ID_LXT970 "LXT970"
+#define STR_ID_LXT971 "LXT971"
+#define STR_ID_82555 "Intel82555"
+#define STR_ID_QS6612 "QS6612"
+#define STR_ID_AMD79C784 "AMD79C784"
+#define STR_ID_LSI80225 "LSI80225"
+#define STR_ID_LSI80225B "LSI80225/B"
+#define STR_ID_DP83848VV "N83848"
+#define STR_ID_DP83849 "N83849"
+#define STR_ID_BCM5222 "BCM5222"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_dma *info)
+{
+ volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
+ int i;
+
+ fecp->ecr = FEC_ECR_RESET;
+ for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf("FEC_RESET_DELAY timeout\n");
+ }
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+ struct fec_info_dma *info;
+ struct eth_device *dev;
+ volatile fecdma_t *ep;
+ uint mii_reply;
+ int j = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ ep = (fecdma_t *) info->miibase;
+
+ ep->mmfr = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= MCFFEC_TOUT_LOOP) {
+ printf("MII not complete\n");
+ return -1;
+ }
+
+ mii_reply = ep->mmfr; /* result from phy */
+ ep->eir = FEC_EIR_MII; /* clear MII complete */
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ struct fec_info_dma *info = dev->priv;
+ int phyaddr, pass, temp;
+ uint phyno, phytype;
+
+ if (info->phyname_init) {
+ return info->phy_addr;
+ }
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+
+ temp = 0;
+ if (info->index > 0) {
+ /* Some phy have multiple address, to solve the issue
+ where phyno keeps starting from 0, check the
+ previous phy address if both miibase are the same. */
+ if (info->miibase == (info->next)->miibase) {
+ temp = (info->next)->phy_addr + 1;
+ }
+ }
+
+ for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
+
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |=
+ mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_BCM5222:
+ strcpy(info->phy_name, STR_ID_BCM5222);
+ info->phyname_init = 1;
+ break;
+ default:
+ strcpy(info->phy_name, "unknown");
+ info->phyname_init = 1;
+ break;
+ }
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ", phyno, pass);
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_BCM5222:
+ printf(STR_ID_BCM5222);
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0)
+ printf("No PHY device found.\n");
+
+ return phyaddr;
+}
+#endif /* CFG_DISCOVER_PHY */
+
+void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
+
+void __mii_init(void)
+{
+ volatile fecdma_t *fecp;
+ struct fec_info_dma *info;
+ struct eth_device *dev;
+ int miispd = 0, i = 0;
+ u16 autoneg = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ fecp = (fecdma_t *) info->miibase;
+
+ fecpin_setclear(dev, 1);
+
+ mii_reset(info);
+
+ /* We use strictly polling mode only */
+ fecp->eimr = 0;
+
+ /* Clear any pending interrupt */
+ fecp->eir = 0xffffffff;
+
+ /* Set MII speed */
+ miispd = (gd->bus_clk / 1000000) / 5;
+ fecp->mscr = miispd << 1;
+
+ info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+ while (i < MCFFEC_TOUT_LOOP) {
+ autoneg = 0;
+ miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+ i++;
+
+ if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+ break;
+
+ udelay(500);
+ }
+ if (i >= MCFFEC_TOUT_LOOP) {
+ printf("Auto Negotiation not complete\n");
+ }
+
+ /* adapt to the half/full speed settings */
+ info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+ info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+
+#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds
new file mode 100644
index 0000000..c10472a
--- /dev/null
+++ b/board/freescale/m548xevb/u-boot.lds
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf547x_8x/start.o (.text)
+ lib_m68k/traps.o (.text)
+ lib_m68k/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/freescale/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile
index a987e510..e97ba81 100644
--- a/board/freescale/mpc8313erdb/Makefile
+++ b/board/freescale/mpc8313erdb/Makefile
@@ -32,7 +32,7 @@
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/freescale/mpc8315erdb/Makefile b/board/freescale/mpc8315erdb/Makefile
new file mode 100644
index 0000000..e97ba81
--- /dev/null
+++ b/board/freescale/mpc8315erdb/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o sdram.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc8315erdb/config.mk b/board/freescale/mpc8315erdb/config.mk
new file mode 100644
index 0000000..f768264
--- /dev/null
+++ b/board/freescale/mpc8315erdb/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xFE000000
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c
new file mode 100644
index 0000000..7af36dd
--- /dev/null
+++ b/board/freescale/mpc8315erdb/mpc8315erdb.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#include <pci.h>
+#include <mpc83xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+
+ if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+ gd->flags |= GD_FLG_SILENT;
+
+ return 0;
+}
+
+static u8 read_board_info(void)
+{
+ u8 val8;
+ i2c_set_bus_num(0);
+
+ if (i2c_read(CFG_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
+ return val8;
+ else
+ return 0;
+}
+
+int checkboard(void)
+{
+ static const char * const rev_str[] = {
+ "0.0",
+ "0.1",
+ "1.0",
+ "1.1",
+ "<unknown>",
+ };
+ u8 info;
+ int i;
+
+ info = read_board_info();
+ i = (!info) ? 4: info & 0x03;
+
+ printf("Board: Freescale MPC8315ERDB Rev %s\n", rev_str[i]);
+
+ return 0;
+}
+
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI_MEM_BASE,
+ phys_start: CFG_PCI_MEM_PHYS,
+ size: CFG_PCI_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI_MMIO_BASE,
+ phys_start: CFG_PCI_MMIO_PHYS,
+ size: CFG_PCI_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI_IO_BASE,
+ phys_start: CFG_PCI_IO_PHYS,
+ size: CFG_PCI_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ struct pci_region *reg[] = { pci_regions };
+ int warmboot;
+
+ /* Enable all 3 PCI_CLK_OUTPUTs. */
+ clk->occr |= 0xe0000000;
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
+ warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF;
+
+ mpc83xx_pci_init(1, reg, warmboot);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+}
+#endif
diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c
new file mode 100644
index 0000000..f97e3c7
--- /dev/null
+++ b/board/freescale/mpc8315erdb/sdram.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Authors: Nick.Spence@freescale.com
+ * Wilson.Lo@freescale.com
+ * scottwood@freescale.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <spd_sdram.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void resume_from_sleep(void)
+{
+ u32 magic = *(u32 *)0;
+
+ typedef void (*func_t)(void);
+ func_t resume = *(func_t *)4;
+
+ if (magic == 0xf5153ae5)
+ resume();
+
+ gd->flags &= ~GD_FLG_SILENT;
+ puts("\nResume from sleep failed: bad magic word\n");
+}
+
+/* Fixed sdram init -- doesn't use serial presence detect.
+ *
+ * This is useful for faster booting in configs where the RAM is unlikely
+ * to be changed, or for things like NAND booting where space is tight.
+ */
+static long fixed_sdram(void)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+ im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+
+ /*
+ * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
+ * or the DDR2 controller may fail to initialize correctly.
+ */
+ udelay(50000);
+
+ im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
+ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+
+ /* Currently we use only one CS, so disable the other bank. */
+ im->ddr.cs_config[1] = 0;
+
+ im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+
+ if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG | SDRAM_CFG_BI;
+ else
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+
+ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ sync();
+
+ /* enable DDR controller */
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ sync();
+
+ return msize;
+}
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+ u32 msize;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+ /* DDR SDRAM */
+ msize = fixed_sdram();
+
+ if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+ resume_from_sleep();
+
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return msize;
+}
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 3d72eb7..9f4ac8e 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -27,6 +27,7 @@
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
+#include <spi.h>
#include <spd.h>
#include <miiphy.h>
#if defined(CONFIG_SPD_EEPROM)
@@ -251,6 +252,34 @@
}
#endif
+/*
+ * The following are used to control the SPI chip selects for the SPI command.
+ */
+#ifdef CONFIG_HARD_SPI
+
+#define SPI_CS_MASK 0x80000000
+
+void spi_eeprom_chipsel(int cs)
+{
+ volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+
+ if (cs)
+ iopd->dat &= ~SPI_CS_MASK;
+ else
+ iopd->dat |= SPI_CS_MASK;
+}
+
+/*
+ * The SPI command uses this table of functions for controlling the SPI
+ * chip selects.
+ */
+spi_chipsel_type spi_chipsel[] = {
+ spi_eeprom_chipsel,
+};
+int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+
+#endif /* CONFIG_HARD_SPI */
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
diff --git a/board/freescale/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile
index 31bcdb8..265e341 100644
--- a/board/freescale/mpc8349itx/Makefile
+++ b/board/freescale/mpc8349itx/Makefile
@@ -31,7 +31,7 @@
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 2fcef8b..f909a33 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -316,30 +316,36 @@
immr->sysconf.spridr == SPR_8360E_REV21) {
int nodeoffset;
const char *prop;
- const char *path;
+ int path;
- nodeoffset = fdt_path_offset(fdt, "/aliases");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
#if defined(CONFIG_HAS_ETH0)
/* fixup UCC 1 if using rgmii-id mode */
- path = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
- if (path) {
- prop = fdt_getprop(blob, nodeoffset,
- "phy-connection-type", 0);
+ prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (prop) {
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path,
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
- fdt_setprop(blob, nodeoffset, "phy-connection-type",
- "rgmii-rxid", sizeof("rgmii-rxid"));
+ fdt_setprop(blob, path,
+ "phy-connection-type",
+ "rgmii-rxid",
+ sizeof("rgmii-rxid"));
}
#endif
#if defined(CONFIG_HAS_ETH1)
/* fixup UCC 2 if using rgmii-id mode */
- path = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
- if (path) {
- prop = fdt_getprop(blob, nodeoffset,
- "phy-connection-type", 0);
+ prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (prop) {
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path,
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
- fdt_setprop(blob, nodeoffset, "phy-connection-type",
- "rgmii-rxid", sizeof("rgmii-rxid"));
+ fdt_setprop(blob, path,
+ "phy-connection-type",
+ "rgmii-rxid",
+ sizeof("rgmii-rxid"));
}
#endif
}
diff --git a/board/freescale/mpc837xerdb/Makefile b/board/freescale/mpc837xerdb/Makefile
new file mode 100644
index 0000000..5ec7a87
--- /dev/null
+++ b/board/freescale/mpc837xerdb/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc837xerdb/config.mk b/board/freescale/mpc837xerdb/config.mk
new file mode 100644
index 0000000..5675f81
--- /dev/null
+++ b/board/freescale/mpc837xerdb/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC837xERDB
+#
+
+TEXT_BASE = 0xFE000000
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
new file mode 100644
index 0000000..2d42595
--- /dev/null
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Kevin Lam <kevin.lam@freescale.com>
+ * Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spd.h>
+#include <asm/io.h>
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#endif
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("Testing DRAM from 0x%08x to 0x%08x\n",
+ CFG_MEMTEST_START,
+ CFG_MEMTEST_END);
+
+ printf("DRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test passed.\n");
+ return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+void ddr_enable_ecc(unsigned int dram_size);
+#endif
+int fixed_sdram(void);
+
+long int initdram(int board_type)
+{
+ immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram();
+#else
+ msize = fixed_sdram();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+ /* Initialize DDR ECC byte */
+ ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+ /* return total bus DDR size(bytes) */
+ return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+
+ im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+ udelay(50000);
+
+ im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+ udelay(1000);
+
+ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+ udelay(1000);
+
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ sync();
+ udelay(1000);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ udelay(2000);
+ return CFG_DDR_SIZE;
+}
+#endif /*!CFG_SPD_EEPROM */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC837xERDB\n");
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/freescale/mpc837xerdb/pci.c b/board/freescale/mpc837xerdb/pci.c
new file mode 100644
index 0000000..26e7320
--- /dev/null
+++ b/board/freescale/mpc837xerdb/pci.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+
+#if defined(CONFIG_PCI)
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI_MEM_BASE,
+ phys_start: CFG_PCI_MEM_PHYS,
+ size: CFG_PCI_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI_MMIO_BASE,
+ phys_start: CFG_PCI_MMIO_PHYS,
+ size: CFG_PCI_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI_IO_BASE,
+ phys_start: CFG_PCI_IO_PHYS,
+ size: CFG_PCI_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ struct pci_region *reg[] = { pci_regions };
+
+ /* Enable all 5 PCI_CLK_OUTPUTS */
+ clk->occr |= 0xf8000000;
+ udelay(2000);
+
+ /* Configure PCI Local Access Windows */
+ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ mpc83xx_pci_init(1, reg, 0);
+}
+#endif /* CONFIG_PCI */
diff --git a/board/freescale/mpc8540ads/Makefile b/board/freescale/mpc8540ads/Makefile
index 2913650..be24388 100644
--- a/board/freescale/mpc8540ads/Makefile
+++ b/board/freescale/mpc8540ads/Makefile
@@ -25,9 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mpc8540ads/init.S b/board/freescale/mpc8540ads/init.S
deleted file mode 100644
index 74d71c6..0000000
--- a/board/freescale/mpc8540ads/init.S
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4*1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8*1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12*1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 0: 16M Non-cacheable, guarded
- * 0xff000000 16M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 7: 16K Non-cacheable, guarded
- * 0xf8000000 16K BCSR registers
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
- .long FSL_BOOKE_MAS2(CFG_BCSR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_BCSR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-#if !defined(CONFIG_SPD_EEPROM)
- /*
- * TLB 8, 9: 128M DDR
- * 0x00000000 64M DDR System memory
- * 0x04000000 64M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
-#error("Update the number of table entries in tlb1_entry")
- .long FSL_BOOKE_MAS0(1, 8, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1, 9, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x05
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4
- entry_end
diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c
new file mode 100644
index 0000000..785576a
--- /dev/null
+++ b/board/freescale/mpc8540ads/law.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf800_0000 0xf80f_ffff BCSR 1M
+ * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ /* This is not so much the SDRAM map as it is the whole localbus map. */
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
new file mode 100644
index 0000000..3eaff01
--- /dev/null
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7: 16K Non-cacheable, guarded
+ * 0xf8000000 16K BCSR registers
+ */
+ SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_16K, 1),
+
+#if !defined(CONFIG_SPD_EEPROM)
+ /*
+ * TLB 8, 9: 128M DDR
+ * 0x00000000 64M DDR System memory
+ * 0x04000000 64M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+#error("Update the number of table entries in tlb1_entry")
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_64M, 1),
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 9, BOOKE_PAGESZ_64M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds
index bc0db55..86f8f13 100644
--- a/board/freescale/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -35,7 +35,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/freescale/mpc8540ads/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -65,7 +64,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/freescale/mpc8540ads/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8541cds/Makefile b/board/freescale/mpc8541cds/Makefile
index 7f53098..d1a585a 100644
--- a/board/freescale/mpc8541cds/Makefile
+++ b/board/freescale/mpc8541cds/Makefile
@@ -29,14 +29,12 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o \
+COBJS := $(BOARD).o law.o tlb.o \
../common/cadmus.o \
../common/eeprom.o \
../common/ft_board.o \
../common/via.o
-SOBJS := init.o
-
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/freescale/mpc8541cds/init.S b/board/freescale/mpc8541cds/init.S
deleted file mode 100644
index 8c8c087c..0000000
--- a/board/freescale/mpc8541cds/init.S
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 16M Non-cacheable, guarded
- * 0xff000000 16M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xa0000000 256M PCI2 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xb0000000 256M PCI2 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- * 0xe300_0000 16M PCI2 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 7: 1M Non-cacheable, guarded
- * 0xf8000000 1M CADMUS registers
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(CADMUS_BASE_ADDR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CADMUS_BASE_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
- * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
- * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
- * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
- .section .bootpg, "ax"
- .globl law_entry
-
-law_entry:
- entry_start
- .long 6
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
- entry_end
diff --git a/board/freescale/mpc8541cds/law.c b/board/freescale/mpc8541cds/law.c
new file mode 100644
index 0000000..0ac223c
--- /dev/null
+++ b/board/freescale/mpc8541cds/law.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
+ * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
+ * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
+ * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+ SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8541cds/tlb.c b/board/freescale/mpc8541cds/tlb.c
new file mode 100644
index 0000000..92f759b
--- /dev/null
+++ b/board/freescale/mpc8541cds/tlb.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xa0000000 256M PCI2 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xb0000000 256M PCI2 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ * 0xe300_0000 16M PCI2 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7: 1M Non-cacheable, guarded
+ * 0xf8000000 1M CADMUS registers
+ */
+ SET_TLB_ENTRY(1, CADMUS_BASE_ADDR, CADMUS_BASE_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_1M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds
index 1e490d0..1cbadf2 100644
--- a/board/freescale/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -34,7 +34,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/freescale/mpc8541cds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +63,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/freescale/mpc8541cds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8544ds/Makefile b/board/freescale/mpc8544ds/Makefile
index c6f159a..53368b2 100644
--- a/board/freescale/mpc8544ds/Makefile
+++ b/board/freescale/mpc8544ds/Makefile
@@ -26,9 +26,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-
-SOBJS := init.o
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S
deleted file mode 100644
index 544dc07..0000000
--- a/board/freescale/mpc8544ds/init.S
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long (2f-1f)/16
-1:
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB0 16K Cacheable, guarded
- * Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 64M Non-cacheable, guarded
- * 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_BOOT_BLOCK, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_BOOT_BLOCK, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 1G Non-cacheable, guarded
- * 0x80000000 1G PCIE 8,9,a,b
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
- .long FSL_BOOKE_MAS2(CFG_PCIE_PHYS, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCIE_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI_PHYS + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe100_0000 255M PCI IO range
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-#ifdef CFG_LBC_CACHE_BASE
- /*
- * TLB 5: 64M Cacheable, non-guarded
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_CACHE_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_CACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
- /*
- * TLB 6: 64M Non-cacheable, guarded
- * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_NONCACHE_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_LBC_NONCACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-2:
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * LAW 0 is reserved for boot mapping
- */
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
-
- .long (4f-3f)/8
-3:
- .long 0
- .long (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
-
- .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
-
- .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
-
- .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M)
-
- .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_64K)
-
- .long (CFG_PCIE2_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCIE2_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_64K)
-
- /* contains both PCIE3 MEM & IO space */
- .long (CFG_PCIE3_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCIE3 | (LAWAR_SIZE & LAWAR_SIZE_4M)
-4:
- entry_end
diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c
new file mode 100644
index 0000000..433e509
--- /dev/null
+++ b/board/freescale/mpc8544ds/law.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(4, CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(5, CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(6, CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(7, CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+ SET_LAW_ENTRY(8, CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+ /* contains both PCIE3 MEM & IO space */
+ SET_LAW_ENTRY(9, CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c
new file mode 100644
index 0000000..34cfb38
--- /dev/null
+++ b/board/freescale/mpc8544ds/tlb.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ /*
+ * TLB 0: 64M Non-cacheable, guarded
+ * 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_64M, 1),
+ /*
+ * TLB 1: 1G Non-cacheable, guarded
+ * 0x80000000 1G PCIE 8,9,a,b
+ */
+ SET_TLB_ENTRY(1, CFG_PCIE_PHYS, CFG_PCIE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1G, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ */
+ SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ */
+ SET_TLB_ENTRY(1, CFG_PCI_PHYS + 0x10000000, CFG_PCI_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe100_0000 255M PCI IO range
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_64M, 1),
+
+#ifdef CFG_LBC_CACHE_BASE
+ /*
+ * TLB 5: 64M Cacheable, non-guarded
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+#endif
+ /*
+ * TLB 6: 64M Non-cacheable, guarded
+ * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds
index 66bd4b6..17db8c0 100644
--- a/board/freescale/mpc8544ds/u-boot.lds
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -34,7 +34,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/freescale/mpc8544ds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +63,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/freescale/mpc8544ds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8548cds/Makefile b/board/freescale/mpc8548cds/Makefile
index 7f53098..d1a585a 100644
--- a/board/freescale/mpc8548cds/Makefile
+++ b/board/freescale/mpc8548cds/Makefile
@@ -29,14 +29,12 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o \
+COBJS := $(BOARD).o law.o tlb.o \
../common/cadmus.o \
../common/eeprom.o \
../common/ft_board.o \
../common/via.o
-SOBJS := init.o
-
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/freescale/mpc8548cds/init.S b/board/freescale/mpc8548cds/init.S
deleted file mode 100644
index ed0fc44..0000000
--- a/board/freescale/mpc8548cds/init.S
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Copyright 2004, 2007 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long (2f-1f)/16
-
-1:
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, guarded
- * Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, (MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 16M Non-cacheable, guarded
- * 0xff000000 16M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_BOOT_BLOCK, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_BOOT_BLOCK, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 1G Non-cacheable, guarded
- * 0x80000000 1G PCI1/PCIE 8,9,a,b
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
- .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-#ifdef CFG_RIO_MEM_PHYS
- /*
- * TLB 2: 256M Non-cacheable, guarded
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_PHYS, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 1M PCI1 IO
- * 0xe210_0000 1M PCI2 IO
- * 0xe300_0000 1M PCIe IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_CACHE_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_CACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 7: 64M Non-cacheable, guarded
- * 0xf8000000 64M CADMUS registers, relocated L2SRAM
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_NONCACHE_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_LBC_NONCACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-2:
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe10f_ffff PCI1 IO 1M
- * 0xe280_0000 0xe20f_ffff PCI2 IO 1M
- * 0xe300_0000 0xe30f_ffff PCIe IO 1M
- * 0xf000_0000 0xf3ff_ffff SDRAM 64M
- * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
- * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
- * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * LAW 0 is reserved for boot mapping
- */
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
-
- .long (4f-3f)/8
-3:
- .long 0
- .long (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
-
-#ifdef CFG_PCI1_MEM_PHYS
- .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-#endif
-
-#ifdef CFG_PCI2_MEM_PHYS
- .long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCI2_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-#endif
-
-#ifdef CFG_PCIE1_MEM_PHYS
- .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-#endif
-
- /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
-
-#ifdef CFG_RIO_MEM_PHYS
- .long (CFG_RIO_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)
-#endif
-4:
- entry_end
diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c
new file mode 100644
index 0000000..0ee53e2
--- /dev/null
+++ b/board/freescale/mpc8548cds/law.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe10f_ffff PCI1 IO 1M
+ * 0xe280_0000 0xe20f_ffff PCI2 IO 1M
+ * 0xe300_0000 0xe30f_ffff PCIe IO 1M
+ * 0xf000_0000 0xf3ff_ffff SDRAM 64M
+ * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
+ * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
+ * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * LAW 0 is reserved for boot mapping
+ */
+
+struct law_entry law_table[] = {
+#ifdef CFG_PCI1_MEM_PHYS
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+#endif
+#ifdef CFG_PCI2_MEM_PHYS
+ SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+#endif
+#ifdef CFG_PCIE1_MEM_PHYS
+ SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+#endif
+ /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+ SET_LAW_ENTRY(8, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#ifdef CFG_RIO_MEM_PHYS
+ SET_LAW_ENTRY(9, CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c
new file mode 100644
index 0000000..b21f71b
--- /dev/null
+++ b/board/freescale/mpc8548cds/tlb.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 1G Non-cacheable, guarded
+ * 0x80000000 1G PCI1/PCIE 8,9,a,b
+ */
+ SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1G, 1),
+
+#ifdef CFG_RIO_MEM_PHYS
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+#endif
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 1M PCI1 IO
+ * 0xe210_0000 1M PCI2 IO
+ * 0xe300_0000 1M PCIe IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7: 64M Non-cacheable, guarded
+ * 0xf8000000 64M CADMUS registers, relocated L2SRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_64M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds
index acf25e3..d701096 100644
--- a/board/freescale/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -34,7 +34,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/freescale/mpc8548cds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +63,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/freescale/mpc8548cds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8555cds/Makefile b/board/freescale/mpc8555cds/Makefile
index 7f53098..d1a585a 100644
--- a/board/freescale/mpc8555cds/Makefile
+++ b/board/freescale/mpc8555cds/Makefile
@@ -29,14 +29,12 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o \
+COBJS := $(BOARD).o law.o tlb.o \
../common/cadmus.o \
../common/eeprom.o \
../common/ft_board.o \
../common/via.o
-SOBJS := init.o
-
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/freescale/mpc8555cds/init.S b/board/freescale/mpc8555cds/init.S
deleted file mode 100644
index 8c8c087c..0000000
--- a/board/freescale/mpc8555cds/init.S
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 16M Non-cacheable, guarded
- * 0xff000000 16M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xa0000000 256M PCI2 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xb0000000 256M PCI2 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- * 0xe300_0000 16M PCI2 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 7: 1M Non-cacheable, guarded
- * 0xf8000000 1M CADMUS registers
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(CADMUS_BASE_ADDR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CADMUS_BASE_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
- * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
- * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
- * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
- .section .bootpg, "ax"
- .globl law_entry
-
-law_entry:
- entry_start
- .long 6
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
- entry_end
diff --git a/board/freescale/mpc8555cds/law.c b/board/freescale/mpc8555cds/law.c
new file mode 100644
index 0000000..0ac223c
--- /dev/null
+++ b/board/freescale/mpc8555cds/law.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe20f_ffff PCI1 IO 1M
+ * 0xe210_0000 0xe21f_ffff PCI2 IO 1M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M
+ * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M
+ * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+ SET_LAW_ENTRY(6, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8555cds/tlb.c b/board/freescale/mpc8555cds/tlb.c
new file mode 100644
index 0000000..92f759b
--- /dev/null
+++ b/board/freescale/mpc8555cds/tlb.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xa0000000 256M PCI2 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xb0000000 256M PCI2 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ * 0xe300_0000 16M PCI2 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7: 1M Non-cacheable, guarded
+ * 0xf8000000 1M CADMUS registers
+ */
+ SET_TLB_ENTRY(1, CADMUS_BASE_ADDR, CADMUS_BASE_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_1M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds
index e9fa51e..1cbadf2 100644
--- a/board/freescale/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -34,7 +34,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/freescale/mpc8555cds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +63,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/freescale/mpc8555cds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8560ads/Makefile b/board/freescale/mpc8560ads/Makefile
index 2913650..be24388 100644
--- a/board/freescale/mpc8560ads/Makefile
+++ b/board/freescale/mpc8560ads/Makefile
@@ -25,9 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mpc8560ads/init.S b/board/freescale/mpc8560ads/init.S
deleted file mode 100644
index 37fd0c6..0000000
--- a/board/freescale/mpc8560ads/init.S
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 16M Non-cacheable, guarded
- * 0xff000000 16M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 7: 16K Non-cacheable, guarded
- * 0xf8000000 16K BCSR registers
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
- .long FSL_BOOKE_MAS2(CFG_BCSR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_BCSR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-#if !defined(CONFIG_SPD_EEPROM)
- /*
- * TLB 8, 9: 128M DDR
- * 0x00000000 64M DDR System memory
- * 0x04000000 64M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
-#error("Update the number of table entries in tlb1_entry")
- .long FSL_BOOKE_MAS0(1, 8, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1, 9, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x05
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4
- entry_end
diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c
new file mode 100644
index 0000000..785576a
--- /dev/null
+++ b/board/freescale/mpc8560ads/law.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf800_0000 0xf80f_ffff BCSR 1M
+ * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ /* This is not so much the SDRAM map as it is the whole localbus map. */
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c
new file mode 100644
index 0000000..3eaff01
--- /dev/null
+++ b/board/freescale/mpc8560ads/tlb.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7: 16K Non-cacheable, guarded
+ * 0xf8000000 16K BCSR registers
+ */
+ SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_16K, 1),
+
+#if !defined(CONFIG_SPD_EEPROM)
+ /*
+ * TLB 8, 9: 128M DDR
+ * 0x00000000 64M DDR System memory
+ * 0x04000000 64M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+#error("Update the number of table entries in tlb1_entry")
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_64M, 1),
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 9, BOOKE_PAGESZ_64M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds
index 96af2b1..e2474e5 100644
--- a/board/freescale/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -35,7 +35,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/freescale/mpc8560ads/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -65,7 +64,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/freescale/mpc8560ads/init.o (.text)
cpu/mpc85xx/commproc.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
diff --git a/board/freescale/mpc8568mds/Makefile b/board/freescale/mpc8568mds/Makefile
index 643fbc0..d9f20f9 100644
--- a/board/freescale/mpc8568mds/Makefile
+++ b/board/freescale/mpc8568mds/Makefile
@@ -29,9 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o bcsr.o
-
-SOBJS := init.o
+COBJS := $(BOARD).o bcsr.o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mpc8568mds/init.S b/board/freescale/mpc8568mds/init.S
deleted file mode 100644
index 2748c51..0000000
--- a/board/freescale/mpc8568mds/init.S
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long (2f-1f)/16
-
-1:
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /* TLB 1 Initializations */
- /*
- * TLBe 0: 16M Non-cacheable, guarded
- * 0xff000000 16M FLASH (upper half)
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE + 0x1000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE + 0x1000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLBe 1: 16M Non-cacheable, guarded
- * 0xfe000000 16M FLASH (lower half)
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLBe 2: 1G Non-cacheable, guarded
- * 0x80000000 512M PCI1 MEM
- * 0xa0000000 512M PCIe MEM
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLBe 3: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 8M PCI1 IO
- * 0xe280_0000 8M PCIe IO
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLBe 4: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLBe 5: 256K Non-cacheable, guarded
- * 0xf8000000 32K BCSR
- * 0xf8008000 32K PIB (CS4)
- * 0xf8010000 32K PIB (CS5)
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)
- .long FSL_BOOKE_MAS2(CFG_BCSR_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_BCSR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-2:
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- *0) 0x0000_0000 0x7fff_ffff DDR 2G
- *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB
- *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB
- *-) 0xe000_0000 0xe00f_ffff CCSR 1M
- *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
- *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M
- *5) 0xc000_0000 0xdfff_ffff SRIO 512MB
- *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
- *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
- *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
- *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
- *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
- *
- *Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
-
-#define LAWBAR4 ((CFG_PCIE1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
-
-#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
-#define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
- .section .bootpg, "ax"
- .globl law_entry
-
-law_entry:
- entry_start
- .long (4f-3f)/8
-3:
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6
-4:
- entry_end
diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c
new file mode 100644
index 0000000..5e96ea7
--- /dev/null
+++ b/board/freescale/mpc8568mds/law.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ *0) 0x0000_0000 0x7fff_ffff DDR 2G
+ *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB
+ *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB
+ *-) 0xe000_0000 0xe00f_ffff CCSR 1M
+ *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
+ *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M
+ *5) 0xc000_0000 0xdfff_ffff SRIO 512MB
+ *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
+ *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
+ *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
+ *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
+ *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
+ *
+ *Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(6, CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+ /* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
+ SET_LAW_ENTRY(7, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c
new file mode 100644
index 0000000..225fc94
--- /dev/null
+++ b/board/freescale/mpc8568mds/tlb.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 Initializations */
+ /*
+ * TLBe 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH (upper half)
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x1000000, CFG_FLASH_BASE + 0x1000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLBe 1: 16M Non-cacheable, guarded
+ * 0xfe000000 16M FLASH (lower half)
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLBe 2: 1G Non-cacheable, guarded
+ * 0x80000000 512M PCI1 MEM
+ * 0xa0000000 512M PCIe MEM
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_1G, 1),
+
+ /*
+ * TLBe 3: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 8M PCI1 IO
+ * 0xe280_0000 8M PCIe IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLBe 4: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 4, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLBe 5: 256K Non-cacheable, guarded
+ * 0xf8000000 32K BCSR
+ * 0xf8008000 32K PIB (CS4)
+ * 0xf8010000 32K PIB (CS5)
+ */
+ SET_TLB_ENTRY(1, CFG_BCSR_BASE, CFG_BCSR_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256K, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds
index 7917409..6b30f15 100644
--- a/board/freescale/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -37,7 +37,6 @@
.bootpg 0xFFFFF000:
{
cpu/mpc85xx/start.o (.bootpg)
- board/freescale/mpc8568mds/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -67,7 +66,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/freescale/mpc8568mds/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/freescale/mpc8610hpcd/Makefile b/board/freescale/mpc8610hpcd/Makefile
index 76087c1..12a92ae 100644
--- a/board/freescale/mpc8610hpcd/Makefile
+++ b/board/freescale/mpc8610hpcd/Makefile
@@ -27,14 +27,14 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o \
- ../common/sys_eeprom.o \
- ../common/pixis.o \
- mpc8610hpcd_diu.o \
- ../common/fsl_diu_fb.o
-
SOBJS := init.o
+COBJS := $(BOARD).o
+
+COBJS-${CONFIG_FSL_DIU_FB} += mpc8610hpcd_diu.o
+
+COBJS += ${COBJS-y}
+
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/korat/korat.c b/board/korat/korat.c
index 199c1ff..90fd0a7 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -2,12 +2,12 @@
* (C) Copyright 2007-2008
* Larry Johnson, lrj@acm.org
*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2006
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -26,15 +26,16 @@
*/
#include <common.h>
-#include <asm/gpio.h>
-#include <asm/processor.h>
-#include <asm-ppc/io.h>
#include <i2c.h>
#include <ppc440.h>
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size(ulong base, int banknum);
@@ -47,9 +48,9 @@
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
- /*--------------------------------------------------------------------
+ /*
* Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
+ */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
@@ -101,10 +102,10 @@
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
- SDR0_PFC1_SELECT_CONFIG_4;
+ SDR0_PFC1_SELECT_CONFIG_4;
mfsdr(SDR0_PFC2, sdr0_pfc2);
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
- SDR0_PFC2_SELECT_CONFIG_4;
+ SDR0_PFC2_SELECT_CONFIG_4;
mtsdr(SDR0_PFC2, sdr0_pfc2);
mtsdr(SDR0_PFC1, sdr0_pfc1);
@@ -221,9 +222,6 @@
}
}
-/*---------------------------------------------------------------------------+
- | misc_init_r.
- +---------------------------------------------------------------------------*/
int misc_init_r(void)
{
uint pbcr;
@@ -234,11 +232,7 @@
unsigned long sdr0_pfc1;
char *act = getenv("usbact");
- /*
- * FLASH stuff...
- */
-
- /* Re-do sizing to get full correct info */
+ /* Re-do flash sizing to get full correct info */
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -246,32 +240,7 @@
mtdcr(ebccfga, pb0cr);
pbcr = mfdcr(ebccfgd);
- switch (gd->bd->bi_flashsize) {
- case 1 << 20:
- size_val = 0;
- break;
- case 2 << 20:
- size_val = 1;
- break;
- case 4 << 20:
- size_val = 2;
- break;
- case 8 << 20:
- size_val = 3;
- break;
- case 16 << 20:
- size_val = 4;
- break;
- case 32 << 20:
- size_val = 5;
- break;
- case 64 << 20:
- size_val = 6;
- break;
- case 128 << 20:
- size_val = 7;
- break;
- }
+ size_val = ffs(gd->bd->bi_flashsize) - 21;
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
mtdcr(ebccfga, pb0cr);
mtdcr(ebccfgd, pbcr);
@@ -286,8 +255,7 @@
&flash_info[0]);
/* Env protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR_REDUND,
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1,
&flash_info[0]);
@@ -301,35 +269,40 @@
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mfsdr(SDR0_USB2H0CR, usb2h0cr);
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1 */
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
- /* An 8-bit/60MHz interface is the only possible alternative
- when connecting the Device to the PHY */
- usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1 */
+ /*
+ * An 8-bit/60MHz interface is the only possible alternative
+ * when connecting the Device to the PHY
+ */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
- /* To enable the USB 2.0 Device function through the UTMI interface */
- usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
- usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1 */
+ /*
+ * To enable the USB 2.0 Device function
+ * through the UTMI interface
+ */
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;
- sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
- sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0 */
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;
mtsdr(SDR0_PFC1, sdr0_pfc1);
mtsdr(SDR0_USB2D0CR, usb2d0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mtsdr(SDR0_USB2H0CR, usb2h0cr);
- /*clear resets */
+ /* clear resets */
udelay(1000);
mtsdr(SDR0_SRST1, 0x00000000);
udelay(1000);
@@ -341,14 +314,14 @@
/*-------------------PATCH-------------------------------*/
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1 */
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
udelay(1000);
@@ -372,32 +345,32 @@
mfsdr(SDR0_USB2D0CR, usb2d0cr);
mfsdr(SDR0_PFC1, sdr0_pfc1);
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0 */
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0 */
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
- usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0 */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
- usb2d0cr = usb2d0cr & ~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
- usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0 */
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;
- sdr0_pfc1 = sdr0_pfc1 & ~SDR0_PFC1_UES_MASK;
- sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1 */
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
mtsdr(SDR0_USB2H0CR, usb2h0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mtsdr(SDR0_USB2D0CR, usb2d0cr);
mtsdr(SDR0_PFC1, sdr0_pfc1);
- /*clear resets */
+ /* clear resets */
udelay(1000);
mtsdr(SDR0_SRST1, 0x00000000);
udelay(1000);
@@ -406,7 +379,7 @@
printf("USB: Device(int phy)\n");
}
- mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
+ mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
mtsdr(SDR0_SRST1, reg);
@@ -486,43 +459,42 @@
}
#endif /* defined(CFG_DRAM_TEST) */
-/*************************************************************************
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
+/*
+ * pci_pre_init
*
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
*
- ************************************************************************/
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB3 devices to 0.
- | Set PLB3 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
mfsdr(sdr_amp1, addr);
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb3_acr);
mtdcr(plb3_acr, addr | 0x80000000);
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB4 devices to 0.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
mfsdr(sdr_amp0, addr);
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
mtdcr(plb4_acr, addr);
- /*-------------------------------------------------------------------------+
- | Set Nebula PLB4 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set Nebula PLB4 arbiter to fair mode.
+ */
/* Segment0 */
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
@@ -541,47 +513,51 @@
}
#endif /* defined(CONFIG_PCI) */
-/*************************************************************************
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
+/*
+ * pci_target_init
*
- ************************************************************************/
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
- /*--------------------------------------------------------------------------+
+ /*
* Set up Direct MMIO registers
- *--------------------------------------------------------------------------*/
- /*--------------------------------------------------------------------------+
- | PowerPC440EPX PCI Master configuration.
- | Map one 1Gig range of PLB/processor addresses to PCI memory space.
- | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
- | Use byte reversed out routines to handle endianess.
- | Make this region non-prefetchable.
- +--------------------------------------------------------------------------*/
- out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ */
+ /*
+ * PowerPC440EPX PCI Master configuration.
+ * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ * PLB address 0xA0000000-0xDFFFFFFF
+ * ==> PCI address 0xA0000000-0xDFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ * Make this region non-prefetchable.
+ */
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
+ /* - disabled b4 setting */
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
- out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */
+ /* and enable region */
- out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
- out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
- out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */
+ /* - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
- out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */
+ /* and enable region */
out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
- out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
- out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
- out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
- /*--------------------------------------------------------------------------+
+ /*
* Set up Configuration registers
- *--------------------------------------------------------------------------*/
+ */
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
@@ -599,27 +575,24 @@
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
- /*--------------------------------------------------------------------------+
- * Set up Configuration registers for on-board NEC uPD720101 USB controller
- *--------------------------------------------------------------------------*/
+ /*
+ * Set up Configuration registers for on-board NEC uPD720101 USB
+ * controller.
+ */
pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020);
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-/*************************************************************************
- * pci_master_init
- *
- ************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
- /*--------------------------------------------------------------------------+
- | Write the PowerPC440 EP PCI Configuration regs.
- | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- | Enable PowerPC440 EP to act as a PCI memory target (PTM).
- +--------------------------------------------------------------------------*/
+ /*
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ */
pci_read_config_word(0, PCI_COMMAND, &temp_short);
pci_write_config_word(0, PCI_COMMAND,
temp_short | PCI_COMMAND_MASTER |
@@ -627,28 +600,26 @@
}
#endif
-/*************************************************************************
- * is_pci_host
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
+/*
+ * is_pci_host
*
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
*
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
*
- ************************************************************************/
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
/* Korat is always configured as host. */
return (1);
}
-#endif
+#endif /* defined(CONFIG_PCI) */
#if defined(CONFIG_POST)
/*
@@ -657,6 +628,6 @@
*/
int post_hotkeys_pressed(void)
{
- return 0; /* No hotkeys supported */
+ return 0; /* No hotkeys supported */
}
-#endif
+#endif /* CONFIG_POST */
diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile
index d649c60..28d6cb9 100644
--- a/board/mpc8540eval/Makefile
+++ b/board/mpc8540eval/Makefile
@@ -25,10 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o flash.o
-#COBJS := $(BOARD).o flash.o $(BOARD)_slave.o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o flash.o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/mpc8540eval/init.S b/board/mpc8540eval/init.S
deleted file mode 100644
index a8ac3fb..0000000
--- a/board/mpc8540eval/init.S
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
-* Copyright (C) 2002,2003, Motorola Inc.
-* Xianghua Xiao <X.Xiao@motorola.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-/* TLB1 entries configuration: */
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- .long 0x0a /* the following data table uses a few of 16 TLB entries */
-
- .long FSL_BOOKE_MAS0(1,1,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- #if defined(CFG_FLASH_PORT_WIDTH_16)
- .long FSL_BOOKE_MAS0(1,2,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,3,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE+0x400000,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE+0x400000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- #else
- .long FSL_BOOKE_MAS0(1,2,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,3,0)
- .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(0,0)
- .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- #endif
-
- #if !defined(CONFIG_SPD_EEPROM)
- .long FSL_BOOKE_MAS0(1,4,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE,0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,5,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE+0x4000000,0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x4000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- #else
- .long FSL_BOOKE_MAS0(1,4,0)
- .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(0,0)
- .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,5,0)
- .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(0,0)
- .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- #endif
-
- .long FSL_BOOKE_MAS0(1,6,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
- #if defined(CONFIG_RAM_AS_FLASH)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE,(MAS2_I|MAS2_G))
- #else
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE,0)
- #endif
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,7,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
- #ifdef CONFIG_L2_INIT_RAM
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0,0,0,1,0,0,0,0)
- #else
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0)
- #endif
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,8,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI_MEM_BASE,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI_MEM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,9,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
- .long FSL_BOOKE_MAS2(CFG_BCSR,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_BCSR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- .long FSL_BOOKE_MAS0(1,15,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- #else
- .long FSL_BOOKE_MAS0(1,15,0)
- .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(0,0)
- .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- #endif
- entry_end
-
-/* LAW(Local Access Window) configuration:
- * 0000_0000-0800_0000: DDR(128M) -or- larger
- * f000_0000-f3ff_ffff: PCI(256M)
- * f400_0000-f7ff_ffff: RapidIO(128M)
- * f800_0000-ffff_ffff: localbus(128M)
- * f800_0000-fbff_ffff: LBC SDRAM(64M)
- * fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
- * fdf0_0000-fdff_ffff: CCSRBAR(1M)
- * fe00_0000-ffff_ffff: Flash(32M)
- * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
- * Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#if !defined(CONFIG_RAM_AS_FLASH)
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR2 0
-#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x03
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
- entry_end
diff --git a/board/mpc8540eval/law.c b/board/mpc8540eval/law.c
new file mode 100644
index 0000000..273ec5c
--- /dev/null
+++ b/board/mpc8540eval/law.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-0800_0000: DDR(128M) -or- larger
+ * f000_0000-f3ff_ffff: PCI(256M)
+ * f400_0000-f7ff_ffff: RapidIO(128M)
+ * f800_0000-ffff_ffff: localbus(128M)
+ * f800_0000-fbff_ffff: LBC SDRAM(64M)
+ * fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
+ * fdf0_0000-fdff_ffff: CCSRBAR(1M)
+ * fe00_0000-ffff_ffff: Flash(32M)
+ * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
+ * Window.
+ * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+#ifndef CONFIG_RAM_AS_FLASH
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/mpc8540eval/tlb.c b/board/mpc8540eval/tlb.c
new file mode 100644
index 0000000..f041236
--- /dev/null
+++ b/board/mpc8540eval/tlb.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1M, 1),
+
+ #if defined(CFG_FLASH_PORT_WIDTH_16)
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_4M, 1),
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x400000, CFG_FLASH_BASE + 0x400000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_4M, 1),
+ #else
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_16M, 1),
+ #endif
+
+ #if !defined(CONFIG_SPD_EEPROM)
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 4, BOOKE_PAGESZ_64M, 1),
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+ #endif
+
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ #if defined(CONFIG_RAM_AS_FLASH)
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ #else
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ #endif
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ SET_TLB_ENTRY(1, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 7, BOOKE_PAGESZ_16K, 1),
+
+ SET_TLB_ENTRY(1, CFG_PCI_MEM_PHYS, CFG_PCI_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 8, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 9, BOOKE_PAGESZ_16K, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/mpc8540eval/u-boot.lds b/board/mpc8540eval/u-boot.lds
index 4b342c7..9bbba30 100644
--- a/board/mpc8540eval/u-boot.lds
+++ b/board/mpc8540eval/u-boot.lds
@@ -56,7 +56,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/mpc8540eval/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
@@ -143,7 +142,6 @@
.bootpg :
{
cpu/mpc85xx/start.o (.bootpg)
- board/mpc8540eval/init.o (.bootpg)
} = 0xffff
. = (. & 0xFFF80000) + 0x0007FFFC;
diff --git a/board/netstal/common/fixed_sdram.c b/board/netstal/common/fixed_sdram.c
new file mode 100644
index 0000000..8082f60
--- /dev/null
+++ b/board/netstal/common/fixed_sdram.c
@@ -0,0 +1,105 @@
+/*
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include "nm.h"
+
+#if defined(DEBUG)
+void show_sdram_registers(void)
+{
+ u32 value;
+
+ printf("SDRAM Controller Registers --\n");
+ mfsdram(mem_mcopt1, value);
+ printf(" SDRAM0_CFG : 0x%08x\n", value);
+ mfsdram(mem_status, value);
+ printf(" SDRAM0_STATUS: 0x%08x\n", value);
+ mfsdram(mem_mb0cf, value);
+ printf(" SDRAM0_B0CR : 0x%08x\n", value);
+ mfsdram(mem_mb1cf, value);
+ printf(" SDRAM0_B1CR : 0x%08x\n", value);
+ mfsdram(mem_sdtr1, value);
+ printf(" SDRAM0_TR : 0x%08x\n", value);
+ mfsdram(mem_rtr, value);
+ printf(" SDRAM0_RTR : 0x%08x\n", value);
+}
+#endif
+
+long int fixed_hcu4_sdram (unsigned int dram_size)
+{
+#ifdef DEBUG
+ printf(__FUNCTION__);
+#endif
+ /* disable memory controller */
+ mtsdram(mem_mcopt1, 0x00000000);
+
+ udelay (500);
+
+ /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+ mtsdram(mem_besra, 0xffffffff);
+
+ /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+ mtsdram(mem_besrb, 0xffffffff);
+
+ /* Clear SDRAM0_ECCCFG (disable ECC) */
+ mtsdram(mem_ecccf, 0x00000000);
+
+ /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+ mtsdram(mem_eccerr, 0xffffffff);
+
+ /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
+ */
+ mtsdram(mem_sdtr1, 0x008a4015);
+
+ /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
+ * and refresh timer
+ */
+ switch (dram_size >> 20) {
+ case 32:
+ mtsdram(mem_mb0cf, 0x00062001);
+ mtsdram(mem_rtr, 0x07F00000);
+ break;
+ case 64:
+ mtsdram(mem_mb0cf, 0x00084001);
+ mtsdram(mem_rtr, 0x04100000);
+ break;
+ case 128:
+ mtsdram(mem_mb0cf, 0x000A4001);
+ mtsdram(mem_rtr, 0x04100000);
+ break;
+ default:
+ printf("Invalid memory size of %d MB given\n", dram_size >> 20);
+ }
+
+ /* Power management idle timer set to the default. */
+ mtsdram(mem_pmit, 0x07c00000);
+
+ udelay (500);
+
+ /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
+ mtsdram(mem_mcopt1, 0x90800000);
+
+#ifdef DEBUG
+ printf("%s: done\n", __FUNCTION__);
+#endif
+ return dram_size;
+}
diff --git a/board/netstal/common/nm.h b/board/netstal/common/nm.h
new file mode 100644
index 0000000..2801e13
--- /dev/null
+++ b/board/netstal/common/nm.h
@@ -0,0 +1,38 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+extern void hcu_led_set(u32 value);
+extern u32 get_serial_number(void);
+extern u32 hcu_get_slot(void);
+extern int board_with_pci(void);
+extern void nm_show_print(int generation, int index, int hw_capabilities);
+extern void set_params_for_sw_install(int install_requested, char *board_name );
+extern void common_misc_init_r(void);
+
+enum {
+ /* HW_GENERATION_HCU1 is no longer supported */
+ HW_GENERATION_HCU2 = 0x10,
+ HW_GENERATION_HCU3 = 0x10,
+ HW_GENERATION_HCU4 = 0x20,
+ HW_GENERATION_HCU5 = 0x30,
+ HW_GENERATION_MCU = 0x08,
+ HW_GENERATION_MCU20 = 0x0a,
+ HW_GENERATION_MCU25 = 0x09,
+};
diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c
index a9de45e..b50b4af 100644
--- a/board/netstal/common/nm_bsp.c
+++ b/board/netstal/common/nm_bsp.c
@@ -1,5 +1,5 @@
/*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* This source code is free software; you can redistribute it
@@ -20,22 +20,118 @@
#include <common.h>
#include <command.h>
+#include <net.h>
+#include "nm.h"
-#ifdef CONFIG_CMD_BSP
-/*
- * Command nm_bsp: Netstal Maschinen BSP specific command
- */
-int nm_bsp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DEFAULT_ETH_ADDR "ethaddr"
+
+typedef struct {u8 id; char *name;} generation_info;
+
+generation_info generations[7] = {
+ {HW_GENERATION_HCU2, "HCU2"},
+ {HW_GENERATION_HCU3, "HCU3"},
+ {HW_GENERATION_HCU4, "HCU4"},
+ {HW_GENERATION_HCU5, "HCU5"},
+ {HW_GENERATION_MCU, "MCU"},
+ {HW_GENERATION_MCU20, "MCU20"},
+ {HW_GENERATION_MCU25, "MCU25"},
+};
+
+void nm_show_print(int generation, int index, int hw_capabilities)
+{
+ int j;
+ char *generationName=0;
+
+ /* reset ANSI terminal color mode */
+ printf("\x1B""[0m""Netstal Maschinen AG: ");
+ for (j=0; j < (sizeof(generations)/sizeof(generations[0])); j++) {
+ if (generations[j].id == generation) {
+ generationName = generations[j].name;
+ break;
+ }
+ }
+ printf("%s: index %d HW 0x%x\n", generationName, index, hw_capabilities);
+ for (j = 0;j < 6; j++) {
+ hcu_led_set(1 << j);
+ udelay(200 * 1000);
+ }
+}
+
+void set_params_for_sw_install(int install_requested, char *board_name )
{
- printf("%s: flag %d, argc %d, argv[0] %s\n", __FUNCTION__,
- flag, argc, argv[0]);
- printf("Netstal Maschinen BSP specific command. None at the moment.\n");
- return 0;
+ if (install_requested) {
+ char string[128];
+
+ printf("\n\n%s SW-Installation: %d patching boot parameters\n",
+ board_name, install_requested);
+ setenv("bootdelay", "0");
+ setenv("loadaddr", "0x01000000");
+ setenv("serverip", "172.25.1.1");
+ setenv("bootcmd", "run install");
+ sprintf(string, "tftp ${loadaddr} admin/sw_on_hd; "
+ "tftp ${loadaddr} installer/%s_sw_inst; "
+ "run boot_sw_inst", board_name);
+ setenv("install", string);
+ sprintf(string, "setenv bootargs emac(0,0)c:%s/%s_sw_inst "
+ "e=${ipaddr} h=${serverip} f=0x1000; "
+ "bootvx ${loadaddr}\0",
+ board_name, board_name);
+ setenv("boot_sw_inst", string);
+ }
+}
+
+void common_misc_init_r(void)
+{
+ char *s = getenv(DEFAULT_ETH_ADDR);
+ char *e;
+ int i;
+ u32 serial = get_serial_number();
+ IPaddr_t ipaddr;
+ char *ipstring;
+
+ for (i = 0; i < 6; ++i) {
+ gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ if (gd->bd->bi_enetaddr[3] == 0 &&
+ gd->bd->bi_enetaddr[4] == 0 &&
+ gd->bd->bi_enetaddr[5] == 0) {
+ char ethaddr[22];
+
+ /* Must be in sync with CONFIG_ETHADDR */
+ gd->bd->bi_enetaddr[0] = 0x00;
+ gd->bd->bi_enetaddr[1] = 0x60;
+ gd->bd->bi_enetaddr[2] = 0x13;
+ gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
+ gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
+ gd->bd->bi_enetaddr[5] = hcu_get_slot();
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
+ gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
+ gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
+ gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
+ printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
+ ethaddr, serial);
+ setenv(DEFAULT_ETH_ADDR, ethaddr);
+ }
+
+ /* IP-Adress update */
+ ipstring = getenv("ipaddr");
+ if (ipstring == 0)
+ ipaddr = string_to_ip("172.25.1.99");
+ else
+ ipaddr = string_to_ip(ipstring);
+ if ((ipaddr & 0xff) != (32 + hcu_get_slot())) {
+ char tmp[22];
+
+ ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot();
+ ip_to_string (ipaddr, tmp);
+ printf("%s: enforce %s\n", __FUNCTION__, tmp);
+ setenv("ipaddr", tmp);
+ saveenv();
+ }
}
-U_BOOT_CMD(
- nm_bsp, 1, 1, nm_bsp,
- "nm_bsp - Netstal Maschinen BSP specific command. \n",
- "Help for Netstal Maschinen BSP specific command.\n"
- );
-#endif
diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile
index af90821..b13d9d4 100644
--- a/board/netstal/hcu4/Makefile
+++ b/board/netstal/hcu4/Makefile
@@ -22,14 +22,16 @@
LIB = $(obj)lib$(BOARD).a
+vpath fixed_sdram.c ../common
vpath hcu_flash.c ../common
+vpath nm_bsp.c ../common
# NOBJS : Netstal common objects
-NOBJS = hcu_flash.o
+NOBJS = ../common/fixed_sdram.o ../common/hcu_flash.o ../common/nm_bsp.o
COBJS = $(BOARD).o
SOBJS =
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(NOBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
NOBJS := $(addprefix $(obj),$(NOBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/netstal/hcu4/config.mk b/board/netstal/hcu4/config.mk
index 376609a..580f18c 100644
--- a/board/netstal/hcu4/config.mk
+++ b/board/netstal/hcu4/config.mk
@@ -21,7 +21,7 @@
# Netstal Maschinen AG: HCU4 boards
#
-TEXT_BASE = 0xFFFa0000
+TEXT_BASE = 0xFFFB0000
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG -g
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index 48a3f13..4fbe701 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -23,36 +23,21 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <asm-ppc/u-boot.h>
-#include "../common/nm_bsp.c"
+#include "../common/nm.h"
DECLARE_GLOBAL_DATA_PTR;
#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000)
+#define SYS_SLOT_ADDRESS (0x7C000000 + 0x400000)
+#define HCU3_DIGITAL_IO_REGISTER (0x7C000000 + 0x500000)
+#define HCU_SW_INSTALL_REQUESTED 0x10
-#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */
-
-#define DO_UGLY_SDRAM_WORKAROUND
-
-enum {
- /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */
- HW_GENERATION_HCU2 = 0x10,
- HW_GENERATION_HCU3 = 0x10,
- HW_GENERATION_HCU4 = 0x20,
- HW_GENERATION_MCU = 0x08,
- HW_GENERATION_MCU20 = 0x0a,
- HW_GENERATION_MCU25 = 0x09,
-};
-
-void hcu_led_set(u32 value);
-long int spd_sdram(int(read_spd)(uint addr));
-
-#ifdef CONFIG_SPD_EEPROM
-#define DEBUG
-#endif
+#undef DEBUG
#if defined(DEBUG)
void show_sdram_registers(void);
#endif
+long int fixed_hcu4_sdram (unsigned int dram_size);
/*
* This function is run very early, out of flash, and before devices are
@@ -69,6 +54,7 @@
/* Attention: If you want 1 microsecs times from the external oscillator
* use 0x00804051. But this causes problems with u-boot and linux!
*/
+#define CPC0_CR0_VALUE 0x0030103c
#define CPC0_CR1_VALUE 0x00004051
#define CPC0_ECR 0xaa /* Edge condition register */
#define EBC0_CFG 0x23 /* External Peripheral Control Register */
@@ -77,18 +63,18 @@
int board_early_init_f (void)
{
- /*-------------------------------------------------------------------+
- | Interrupt controller setup for the HCU4 board.
- | Note: IRQ 0-15 405GP internally generated; high; level sensitive
- | IRQ 16 405GP internally generated; low; level sensitive
- | IRQ 17-24 RESERVED/UNUSED
- | IRQ 31 (EXT IRQ 6) (unused)
- +-------------------------------------------------------------------*/
+ /*
+ * Interrupt controller setup for the HCU4 board.
+ * Note: IRQ 0-15 405GP internally generated; high; level sensitive
+ * IRQ 16 405GP internally generated; low; level sensitive
+ * IRQ 17-24 RESERVED/UNUSED
+ * IRQ 31 (EXT IRQ 6) (unused)
+ */
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr (uicer, 0x00000000); /* disable all ints */
mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicpr, 0xFFFFE000); /* set int polarities */
+ mtdcr (uictr, 0x00000000); /* set int trigger levels */
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
@@ -105,47 +91,44 @@
}
#endif
+int sys_install_requested(void)
+{
+ u16 *ioValuePtr = (u16 *)HCU3_DIGITAL_IO_REGISTER;
+ return (in_be16(ioValuePtr) & HCU_SW_INSTALL_REQUESTED) != 0;
+}
+
int checkboard (void)
{
- unsigned int j;
- u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
- u16 generation = *boardVersReg & 0xf0;
- u16 index = *boardVersReg & 0x0f;
+ u16 *boardVersReg = (u16 *)HCU_MACH_VERSIONS_REGISTER;
+ u16 generation = in_be16(boardVersReg) & 0xf0;
+ u16 index = in_be16(boardVersReg) & 0x0f;
+ /* Cannot be done, in board_early_init */
+ mtdcr(CPC0_CR0, CPC0_CR0_VALUE);
/* Force /RTS to active. The board it not wired quite
- correctly to use cts/rtc flow control, so just force the
- /RST active and forget about it. */
+ * correctly to use cts/rtc flow control, so just force the
+ * /RST active and forget about it.
+ */
writeb (readb (0xef600404) | 0x03, 0xef600404);
- printf ("\nNetstal Maschinen AG ");
- if (generation == HW_GENERATION_HCU3)
- printf ("HCU3: index %d\n\n", index);
- else if (generation == HW_GENERATION_HCU4)
- printf ("HCU4: index %d\n\n", index);
- hcu_led_set(0);
- for (j = 0; j < 7; j++) {
- hcu_led_set(1 << j);
- udelay(50 * 1000);
- }
+ nm_show_print(generation, index, 0);
return 0;
}
u32 hcu_led_get(void)
{
- return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff;
+ return (~(in_be32((u32 *)GPIO0_OR)) >> 23) & 0xff;
}
-/*---------------------------------------------------------------------------+
+/*
* hcu_led_set value to be placed into the LEDs (max 6 bit)
- *---------------------------------------------------------------------------*/
+ */
void hcu_led_set(u32 value)
{
u32 tmp = ~value;
- u32 *ledReg;
tmp = (tmp << 23) | 0x7FFFFF;
- ledReg = (u32 *)GPIO0_OR;
- *ledReg = tmp;
+ out_be32((u32 *)GPIO0_OR, tmp);
}
/*
@@ -157,246 +140,72 @@
return;
}
-#if defined(DEBUG)
-void show_sdram_registers(void)
-{
- u32 value;
-
- printf ("SDRAM Controller Registers --\n");
- mfsdram(mem_mcopt1, value);
- printf (" SDRAM0_CFG : 0x%08x\n", value);
- mfsdram(mem_status, value);
- printf (" SDRAM0_STATUS: 0x%08x\n", value);
- mfsdram(mem_mb0cf, value);
- printf (" SDRAM0_B0CR : 0x%08x\n", value);
- mfsdram(mem_mb1cf, value);
- printf (" SDRAM0_B1CR : 0x%08x\n", value);
- mfsdram(mem_sdtr1, value);
- printf (" SDRAM0_TR : 0x%08x\n", value);
- mfsdram(mem_rtr, value);
- printf (" SDRAM0_RTR : 0x%08x\n", value);
-}
-#endif
-
/*
- * this is even after checkboard. It returns the size of the SDRAM
- * that we have installed. This function is called by board_init_f
- * in lib_ppc/board.c to initialize the memory and return what I
- * found. These are default value, which will be overridden later.
+ * hcu_get_slot
*/
-
-long int fixed_hcu4_sdram (int board_type)
+u32 hcu_get_slot(void)
{
-#ifdef DEBUG
- printf (__FUNCTION__);
-#endif
- /* disable memory controller */
- mtdcr (memcfga, mem_mcopt1);
- mtdcr (memcfgd, 0x00000000);
-
- udelay (500);
-
- /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
- mtdcr (memcfga, mem_besra);
- mtdcr (memcfgd, 0xffffffff);
-
- /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
- mtdcr (memcfga, mem_besrb);
- mtdcr (memcfgd, 0xffffffff);
-
- /* Clear SDRAM0_ECCCFG (disable ECC) */
- mtdcr (memcfga, mem_ecccf);
- mtdcr (memcfgd, 0x00000000);
-
- /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
- mtdcr (memcfga, mem_eccerr);
- mtdcr (memcfgd, 0xffffffff);
-
- /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
- * TODO ngngng
- */
- mtdcr (memcfga, mem_sdtr1);
- mtdcr (memcfgd, 0x008a4015);
-
- /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
- * TODO ngngng
- */
- mtdcr (memcfga, mem_mb0cf);
- mtdcr (memcfgd, 0x00062001);
-
- /* refresh timer = 0x400 */
- mtdcr (memcfga, mem_rtr);
- mtdcr (memcfgd, 0x04000000);
-
- /* Power management idle timer set to the default. */
- mtdcr (memcfga, mem_pmit);
- mtdcr (memcfgd, 0x07c00000);
-
- udelay (500);
-
- /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
- mtdcr (memcfga, mem_mcopt1);
- mtdcr (memcfgd, 0x90800000);
-
-#ifdef DEBUG
- printf ("%s: done\n", __FUNCTION__);
-#endif
- return SDRAM_LEN;
+ u16 *slot = (u16 *)SYS_SLOT_ADDRESS;
+ return in_be16(slot) & 0x7f;
}
-/*---------------------------------------------------------------------------+
- * hcu_serial_number
- *---------------------------------------------------------------------------*/
-static u32 hcu_serial_number(void)
+/*
+ * get_serial_number
+ */
+u32 get_serial_number(void)
{
u32 *serial = (u32 *)CFG_FLASH_BASE;
- if (*serial == 0xffffffff)
- return get_ticks();
+ if (in_be32(serial) == 0xffffffff)
+ return 0;
- return *serial;
+ return in_be32(serial);
}
-/*---------------------------------------------------------------------------+
+/*
* misc_init_r.
- *---------------------------------------------------------------------------*/
+ */
int misc_init_r(void)
{
- char *s = getenv("ethaddr");
- char *e;
- int i;
- u32 serial = hcu_serial_number();
-
- for (i = 0; i < 6; ++i) {
- gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
-
- if (gd->bd->bi_enetaddr[3] == 0 &&
- gd->bd->bi_enetaddr[4] == 0 &&
- gd->bd->bi_enetaddr[5] == 0) {
- char ethaddr[22];
- /* [0..3] Must be in sync with CONFIG_ETHADDR */
- gd->bd->bi_enetaddr[0] = 0x00;
- gd->bd->bi_enetaddr[1] = 0x60;
- gd->bd->bi_enetaddr[2] = 0x13;
- gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
- gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
- gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xff;
- sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
- gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
- gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
- gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
- printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
- ethaddr, serial);
- setenv ("ethaddr", ethaddr);
- }
+ common_misc_init_r();
+ set_params_for_sw_install( sys_install_requested(), "hcu4" );
return 0;
}
-
-#ifdef DO_UGLY_SDRAM_WORKAROUND
-#include "i2c.h"
-
-void set_spd_default_value(unsigned int spd_addr,uchar def_val)
-{
- uchar value;
- int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ;
-
- if (res == 0 && value == 0xff) {
- res = i2c_write(SPD_EEPROM_ADDRESS,
- spd_addr, 1, &def_val, 1) ;
-#ifdef DEBUG
- printf("%s: Setting spd offset %3d to %3d res %d\n",
- __FUNCTION__, spd_addr, def_val, res);
-#endif
- }
-}
-#endif
long int initdram(int board_type)
{
long dram_size = 0;
-
-#if !defined(CONFIG_SPD_EEPROM)
- dram_size = fixed_hcu4_sdram();
-#else
-#ifdef DO_UGLY_SDRAM_WORKAROUND
- /* Workaround if you have no working I2C-EEPROM-SPD-configuration */
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- set_spd_default_value(2, 4); /* SDRAM Type */
- set_spd_default_value(7, 0); /* module width, high byte */
- set_spd_default_value(12, 1); /* Refresh or 0x81 */
-
- /* Only correct for HCU3 with 32 MB RAM*/
- /* Number of bytes used by module manufacturer */
- set_spd_default_value( 0, 128);
- set_spd_default_value( 1, 11 ); /* Total SPD memory size */
- set_spd_default_value( 2, 4 ); /* Memory type */
- set_spd_default_value( 3, 12 ); /* Number of row address bits */
- set_spd_default_value( 4, 9 ); /* Number of column address bits */
- set_spd_default_value( 5, 1 ); /* Number of module rows */
- set_spd_default_value( 6, 32 ); /* Module data width, LSB */
- set_spd_default_value( 7, 0 ); /* Module data width, MSB */
- set_spd_default_value( 8, 1 ); /* Module interface signal levels */
- /* SDRAM cycle time for highest CL (Tclk) */
- set_spd_default_value( 9, 112);
- /* SDRAM access time from clock for highest CL (Tac) */
- set_spd_default_value(10, 84 );
- set_spd_default_value(11, 2 ); /* Module configuration type */
- set_spd_default_value(12, 128); /* Refresh rate/type */
- set_spd_default_value(13, 16 ); /* Primary SDRAM width */
- set_spd_default_value(14, 8 ); /* Error Checking SDRAM width */
- /* SDRAM device attributes, min clock delay for back to back */
- /*random column addresses (Tccd) */
- set_spd_default_value(15, 1 );
- /* SDRAM device attributes, burst lengths supported */
- set_spd_default_value(16, 143);
- /* SDRAM device attributes, number of banks on SDRAM device */
- set_spd_default_value(17, 4 );
- /* SDRAM device attributes, CAS latency */
- set_spd_default_value(18, 6 );
- /* SDRAM device attributes, CS latency */
- set_spd_default_value(19, 1 );
- /* SDRAM device attributes, WE latency */
- set_spd_default_value(20, 1 );
- set_spd_default_value(21, 0 ); /* SDRAM module attributes */
- /* SDRAM device attributes, general */
- set_spd_default_value(22, 14 );
- /* SDRAM cycle time for 2nd highest CL (Tclk) */
- set_spd_default_value(23, 117);
- /* SDRAM access time from clock for2nd highest CL (Tac) */
- set_spd_default_value(24, 84 );
- /* SDRAM cycle time for 3rd highest CL (Tclk) */
- set_spd_default_value(25, 0 );
- /* SDRAM access time from clock for3rd highest CL (Tac) */
- set_spd_default_value(26, 0 );
- set_spd_default_value(27, 15 ); /* Minimum row precharge time (Trp) */
- /* Minimum row active to row active delay (Trrd) */
- set_spd_default_value(28, 14 );
- set_spd_default_value(29, 15 ); /* Minimum CAS to RAS delay (Trcd) */
- set_spd_default_value(30, 37 ); /* Minimum RAS pulse width (Tras) */
- set_spd_default_value(31, 8 ); /* Module bank density */
- /* Command and Address signal input setup time */
- set_spd_default_value(32, 21 );
- /* Command and Address signal input hold time */
- set_spd_default_value(33, 8 );
- set_spd_default_value(34, 21 ); /* Data signal input setup time */
- set_spd_default_value(35, 8 ); /* Data signal input hold time */
-#endif /* DO_UGLY_SDRAM_WORKAROUND */
- dram_size = spd_sdram(0);
-#endif
+ u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
+ u16 generation = in_be16(boardVersReg) & 0xf0;
+ if (generation == HW_GENERATION_HCU3)
+ dram_size = 32*1024*1024;
+ else dram_size = 64*1024*1024;
+ fixed_hcu4_sdram(dram_size);
#ifdef DEBUG
show_sdram_registers();
#endif
-#if defined(CFG_DRAM_TEST)
- bcu4_testdram(dram_size);
- printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024));
-#endif
-
return dram_size;
}
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile
index 27398b9..9f248a4 100644
--- a/board/netstal/hcu5/Makefile
+++ b/board/netstal/hcu5/Makefile
@@ -23,13 +23,14 @@
LIB = $(obj)lib$(BOARD).a
vpath hcu_flash.c ../common
+vpath nm_bsp.c ../common
# NOBJS : Netstal common objects
-NOBJS = hcu_flash.o
+NOBJS = ../common/hcu_flash.o ../common/nm_bsp.o
COBJS = $(BOARD).o sdram.o
SOBJS = init.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(NOBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
NOBJS := $(addprefix $(obj),$(NOBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/netstal/hcu5/README.txt b/board/netstal/hcu5/README.txt
index 3118da9..c205108 100644
--- a/board/netstal/hcu5/README.txt
+++ b/board/netstal/hcu5/README.txt
@@ -10,9 +10,6 @@
- Fix RTS/CTS problem (HW?)
CONFIG_SERIAL_MULTI/CONFIG_SERIAL_SOFTWARE_FIFO hangs after
Switching to interrupt driven serial input mode
-- Make vxWorks start from u-boot. Possible reasons
- - Does vxWorks need an entry for the Machine Check interrupt like this
- tlbentry( 0x40000000, SZ_256M, 0, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) ?
Caveats:
--------
diff --git a/board/netstal/hcu5/config.mk b/board/netstal/hcu5/config.mk
index cfd5744..51ddb76 100644
--- a/board/netstal/hcu5/config.mk
+++ b/board/netstal/hcu5/config.mk
@@ -21,7 +21,7 @@
# Netstal Maschinen AG: HCU5 boards
#
-TEXT_BASE = 0xFFFa0000
+TEXT_BASE = 0xFFFB0000
PLATFORM_CPPFLAGS += -DCONFIG_440=1
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index b9b10fd..2c7afe2 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -1,5 +1,5 @@
/*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* This source code is free software; you can redistribute it
@@ -21,13 +21,11 @@
#include <common.h>
#include <asm/processor.h>
#include <ppc440.h>
-#include <asm/mmu.h>
-#include <net.h>
+#include <asm/io.h>
+#include "../common/nm.h"
DECLARE_GLOBAL_DATA_PTR;
-void hcu_led_set(u32 value);
-
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
#undef BOOTSTRAP_OPTION_A_ACTIVE
@@ -42,23 +40,10 @@
#define SDR0_ECID2 0x0082
#define SDR0_ECID3 0x0083
-#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000)
+#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000)
#define SYS_SLOT_ADDRESS (CFG_CPLD + 0x00400000)
-
-#define DEFAULT_ETH_ADDR "ethaddr"
-/* ethaddr for first or etha1ddr for second ethernet */
-
-enum {
- /* HW_GENERATION_HCU1 is no longer supported */
- HW_GENERATION_HCU2 = 0x10,
- HW_GENERATION_HCU3 = 0x10,
- HW_GENERATION_HCU4 = 0x20,
- HW_GENERATION_HCU5 = 0x30,
- HW_GENERATION_MCU = 0x08,
- HW_GENERATION_MCU20 = 0x0a,
- HW_GENERATION_MCU25 = 0x09,
-};
-
+#define HCU_DIGITAL_IO_REGISTER (CFG_CPLD + 0x0500000)
+#define HCU_SW_INSTALL_REQUESTED 0x10
/*
* This function is run very early, out of flash, and before devices are
@@ -72,7 +57,6 @@
int board_early_init_f(void)
{
- u32 reg;
#ifdef BOOTSTRAP_OPTION_A_ACTIVE
/* Booting with Bootstrap Option A
@@ -113,10 +97,9 @@
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
- /*--------------------------------------------------------------------
+ /*
* Setup the GPIO pins
- *-------------------------------------------------------------------*/
- /* test-only: take GPIO init from pcs440ep ???? in config file */
+ */
out32(GPIO0_OR, 0x00000000);
out32(GPIO0_TCR, 0x7C2FF1CF);
out32(GPIO0_OSRL, 0x40055000);
@@ -143,9 +126,9 @@
out32(GPIO1_ISR3L, 0x00000000);
out32(GPIO1_ISR3H, 0x00000000);
- /*--------------------------------------------------------------------
+ /*
* Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
+ */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
@@ -172,12 +155,6 @@
mtsdr(sdr_pfc0, 0x00003E00); /* Pin function: */
mtsdr(sdr_pfc1, 0x00848000); /* Pin function: UART0 has 4 pins */
- /* PCI arbiter enabled */
- mfsdr(sdr_pci0, reg);
- mtsdr(sdr_pci0, 0x80000000 | reg);
-
- pci_pre_init(0);
-
/* setup BOOT FLASH */
mtsdr(SDR0_CUST0, 0xC0082350);
@@ -192,33 +169,27 @@
#endif
+int sys_install_requested(void)
+{
+ u16 *ioValuePtr = (u16 *)HCU_DIGITAL_IO_REGISTER;
+ return (in_be16(ioValuePtr) & HCU_SW_INSTALL_REQUESTED) != 0;
+}
+
int checkboard(void)
{
- unsigned int j;
u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER;
u16 *boardVersReg = (u16 *) HCU_CPLD_VERSION_REGISTER;
- u16 generation = *boardVersReg & 0xf0;
- u16 index = *boardVersReg & 0x0f;
+ u16 generation = in_be16(boardVersReg) & 0xf0;
+ u16 index = in_be16(boardVersReg) & 0x0f;
u32 ecid0, ecid1, ecid2, ecid3;
- printf("Netstal Maschinen AG: ");
- if (generation == HW_GENERATION_HCU3)
- printf("HCU3: index %d", index);
- else if (generation == HW_GENERATION_HCU4)
- printf("HCU4: index %d", index);
- else if (generation == HW_GENERATION_HCU5)
- printf("HCU5: index %d", index);
- printf(" HW 0x%02x\n", *hwVersReg & 0xff);
+ nm_show_print(generation, index, in_be16(hwVersReg) & 0xff);
mfsdr(SDR0_ECID0, ecid0);
mfsdr(SDR0_ECID1, ecid1);
mfsdr(SDR0_ECID2, ecid2);
mfsdr(SDR0_ECID3, ecid3);
printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3);
- for (j = 0;j < 6; j++) {
- hcu_led_set(1 << j);
- udelay(200 * 1000);
- }
return 0;
}
@@ -228,97 +199,47 @@
return in16(SYS_IO_ADDRESS) & 0x3f;
}
-/*---------------------------------------------------------------------------+
+/*
* hcu_led_set value to be placed into the LEDs (max 6 bit)
- *---------------------------------------------------------------------------*/
+ */
void hcu_led_set(u32 value)
{
out16(SYS_IO_ADDRESS, value);
}
-/*---------------------------------------------------------------------------+
+/*
* get_serial_number
- *---------------------------------------------------------------------------*/
-static u32 get_serial_number(void)
+ */
+u32 get_serial_number(void)
{
u32 *serial = (u32 *)CFG_FLASH_BASE;
- if (*serial == 0xffffffff)
+ if (in_be32(serial) == 0xffffffff)
return 0;
- return *serial;
+ return in_be32(serial);
}
-/*---------------------------------------------------------------------------+
+/*
* hcu_get_slot
- *---------------------------------------------------------------------------*/
+ */
u32 hcu_get_slot(void)
{
u16 *slot = (u16 *)SYS_SLOT_ADDRESS;
- return (*slot) & 0x7f;
+ return in_be16(slot) & 0x7f;
}
-/*---------------------------------------------------------------------------+
+/*
* misc_init_r.
- *---------------------------------------------------------------------------*/
+ */
int misc_init_r(void)
{
- char *s = getenv(DEFAULT_ETH_ADDR);
- char *e;
- int i;
- u32 serial = get_serial_number();
unsigned long usb2d0cr = 0;
unsigned long usb2phy0cr, usb2h0cr = 0;
unsigned long sdr0_pfc1;
- for (i = 0; i < 6; ++i) {
- gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
-
- if (gd->bd->bi_enetaddr[3] == 0 &&
- gd->bd->bi_enetaddr[4] == 0 &&
- gd->bd->bi_enetaddr[5] == 0) {
- char ethaddr[22];
-
- /* Must be in sync with CONFIG_ETHADDR */
- gd->bd->bi_enetaddr[0] = 0x00;
- gd->bd->bi_enetaddr[1] = 0x60;
- gd->bd->bi_enetaddr[2] = 0x13;
- gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
- gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
- gd->bd->bi_enetaddr[5] = hcu_get_slot();
- sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
- gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
- gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
- gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
- printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
- ethaddr, serial);
- setenv(DEFAULT_ETH_ADDR, ethaddr);
- }
-
- /* IP-Adress update */
- {
- IPaddr_t ipaddr;
- char *ipstring;
-
- ipstring = getenv("ipaddr");
- if (ipstring == 0)
- ipaddr = string_to_ip("172.25.1.99");
- else
- ipaddr = string_to_ip(ipstring);
- if ((ipaddr & 0xff) != (32 + hcu_get_slot())) {
- char tmp[22];
-
- ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot();
- ip_to_string (ipaddr, tmp);
- printf("%s: enforce %s\n", __FUNCTION__, tmp);
- setenv("ipaddr", tmp);
- }
- }
#ifdef CFG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
@@ -326,12 +247,14 @@
0xffffffff,
&flash_info[0]);
+#ifdef CFG_ENV_ADDR_REDUND
/* Env protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
CFG_ENV_ADDR_REDUND,
CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
&flash_info[0]);
#endif
+#endif
/*
* USB stuff...
@@ -355,7 +278,8 @@
usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
/* An 8-bit/60MHz interface is the only possible alternative
- when connecting the Device to the PHY */
+ * when connecting the Device to the PHY
+ */
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
@@ -376,14 +300,37 @@
mtsdr(SDR0_SRST1, 0x00000000);
udelay(1000);
mtsdr(SDR0_SRST0, 0x00000000);
-
printf("USB: Host(int phy) Device(ext phy)\n");
+ common_misc_init_r();
+ set_params_for_sw_install( sys_install_requested(), "hcu5" );
+ /* We cannot easily enable trace before, as there are other
+ * routines messing around with sdr0_pfc1. And I do not need it.
+ */
+ if (mfspr(dbcr0) & 0x80000000) {
+ /* External debugger alive
+ * enable trace facilty for Lauterback
+ * CCR0[DAPUIB]=0 Enable broadcast of instruction data
+ * to auxiliary processor interface
+ * CCR0[DTB]=0 Enable broadcast of trace information
+ * SDR0_PFC0[TRE] Trace signals are enabled instead of
+ * GPIO49-63
+ */
+ mtspr(ccr0, mfspr(ccr0) &~ 0x00108000);
+ mtsdr(SDR0_PFC0, sdr0_pfc1 | 0x00000100);
+ }
return 0;
}
+#ifdef CONFIG_PCI
+int board_with_pci(void)
+{
+ u32 reg;
-#if defined(CONFIG_PCI)
-/*************************************************************************
+ mfsdr(sdr_pci0, reg);
+ return (reg & SDR0_XCR_PAE_MASK);
+}
+
+/*
* pci_pre_init
*
* This routine is called just prior to registering the hose and gives
@@ -394,81 +341,64 @@
* (add regions, override default access routines, etc) or perform
* certain pre-initialization actions.
*
- ************************************************************************/
+ */
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
- /*-------------------------------------------------------------------+
- * As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM.
- * Workaround: Disable write pipelining to DDR SDRAM by setting
- * PLB0_ACR[WRP] = 0.
- *-------------------------------------------------------------------*/
+ if (!board_with_pci()) { return 0; }
- /*-------------------------------------------------------------------+
- | Set priority for all PLB3 devices to 0.
- | Set PLB3 arbiter to fair mode.
- +-------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
mfsdr(sdr_amp1, addr);
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb3_acr);
- /* mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask); */ /* ngngng */
mtdcr(plb3_acr, addr | 0x80000000); /* Sequoia */
- /*-------------------------------------------------------------------+
- | Set priority for all PLB4 devices to 0.
- +-------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
mfsdr(sdr_amp0, addr);
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
- /* mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask); */ /* ngngng */
mtdcr(plb4_acr, addr); /* Sequoia */
- /*-------------------------------------------------------------------+
- | Set Nebula PLB4 arbiter to fair mode.
- +-------------------------------------------------------------------*/
- /* Segment0 */
- addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
- addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
- addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
- /* addr = (addr & ~plb0_acr_wrp_mask); */ /* ngngng */
- addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; /* Sequoia */
-
- /* mtdcr(plb0_acr, addr); */ /* Sequoia */
+ /*
+ * As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM.
+ * Workaround: Disable write pipelining to DDR SDRAM by setting
+ * PLB0_ACR[WRP] = 0.
+ */
mtdcr(plb0_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */
/* Segment1 */
- addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
- addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
- addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
- addr = (addr & ~plb1_acr_wrp_mask) ;
- /* mtdcr(plb1_acr, addr); */ /* Sequoia */
mtdcr(plb1_acr, 0); /* PATCH HAB: WRITE PIPELINING OFF */
- return 1;
+ return board_with_pci();
}
-/*************************************************************************
+/*
* pci_target_init
*
* The bootstrap configuration provides default settings for the pci
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*
- ************************************************************************/
+ */
void pci_target_init(struct pci_controller *hose)
{
- /*-------------------------------------------------------------+
+ if (!board_with_pci()) { return; }
+ /*
* Set up Direct MMIO registers
- *-------------------------------------------------------------*/
- /*-------------------------------------------------------------+
- | PowerPC440EPX PCI Master configuration.
- | Map one 1Gig range of PLB/processor addresses to PCI memory space.
- | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address
- | 0xA0000000-0xDFFFFFFF
- | Use byte reversed out routines to handle endianess.
- | Make this region non-prefetchable.
- +-------------------------------------------------------------*/
+ *
+ * PowerPC440EPX PCI Master configuration.
+ * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address
+ * 0xA0000000-0xDFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ * Make this region non-prefetchable.
+ */
/* PMM0 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM0MA, 0x00000000);
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
@@ -492,9 +422,9 @@
out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
- /*------------------------------------------------------------------+
+ /*
* Set up Configuration registers
- *------------------------------------------------------------------*/
+ */
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
@@ -513,26 +443,27 @@
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
}
-/*************************************************************************
+/*
* pci_master_init
*
- ************************************************************************/
+ */
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
+ if (!board_with_pci()) { return; }
- /*---------------------------------------------------------------+
- | Write the PowerPC440 EP PCI Configuration regs.
- | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- | Enable PowerPC440 EP to act as a PCI memory target (PTM).
- +--------------------------------------------------------------*/
+ /*---------------------------------------------------------------
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ *--------------------------------------------------------------*/
pci_read_config_word(0, PCI_COMMAND, &temp_short);
pci_write_config_word(0, PCI_COMMAND,
temp_short | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY);
}
-/*************************************************************************
+/*
* is_pci_host
*
* This routine is called to determine if a pci scan should be
@@ -545,10 +476,28 @@
*
* Return 0 for adapter mode, non-zero for host (monarch) mode.
*
- *
- ************************************************************************/
+ */
int is_pci_host(struct pci_controller *hose)
{
return 1;
}
#endif /* defined(CONFIG_PCI) */
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S
index 5ab6cd2..188272e 100644
--- a/board/netstal/hcu5/init.S
+++ b/board/netstal/hcu5/init.S
@@ -39,41 +39,68 @@
tlbtab:
tlbtab_start
- /* vxWorks needs this entry for the Machine Check interrupt, */
- /* tlbentry( 0x40000000, SZ_256M, 0, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) */
+ /* TLB#0: vxWorks needs this entry for the Machine Check interrupt, */
+ tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ /* TLB#1: TLB-entry for DDR SDRAM (Up to 2GB) */
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0,
+ AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB#2: TLB-entry for EBC */
+ tlbentry( 0x80000000, SZ_256M, 0x80000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
/*
- * BOOT_CS (FLASH) must be second. Before relocation SA_I can be off to use the
- * speed up boot process. It is patched after relocation to enable SA_I
+ * TLB#3: BOOT_CS (FLASH) must be forth. Before relocation SA_I can be
+ * off to use the speed up boot process. It is patched after relocation
+ * to enable SA_I
*/
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_1M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_1M, CFG_BOOT_BASE_ADDR, 1,
+ AC_R|AC_W|AC_X|SA_G)
- /* TLB-entry for PCI Memory */
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
- /* TLB-entry for EBC (CFG_CPLD) */
- /* tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) */
- /* CAN */
- tlbentry( CFG_CS_1, SZ_16M, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
- /* IMC + CPLD */
- tlbentry( CFG_CS_2, SZ_16M, CFG_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
- /* IMC-Fast */
- tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_CS_3 + 0x1000000, SZ_16M, CFG_CS_3 + 0x1000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ /* TLB#4: */
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1,
+ AC_R|AC_W|SA_G|SA_I )
+ /* TLB#5: */
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1,
+ AC_R|AC_W|SA_G|SA_I )
+ /* TLB#6: */
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1,
+ AC_R|AC_W|SA_G|SA_I )
/* TLB-entry for Internal Registers & OCM */
- tlbentry( CFG_PCI_BASE, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
+ /* TLB#7: */
+ tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,
+ AC_R|AC_W|AC_X|SA_G|SA_I )
/*TLB-entry PCI registers*/
+ /* TLB#8: */
tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB-entry for peripherals */
+ /* TLB#9: */
tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- /* TLB for SDRAM will be added by initdram (sdram.c) */
+ /* CAN */
+ /* TLB#10: */
+ tlbentry( CFG_CS_1, SZ_1K, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB#11: CPLD and IMC-Standard 32 MB */
+ tlbentry( CFG_CS_2, SZ_16M, CFG_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB#12: */
+ tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1,
+ AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* IMC-Fast 32 MB */
+ /* TLB#13: */
+ tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ /* TLB#14: */
+ tlbentry( CFG_CS_3 + 0x1000000, SZ_16M, CFG_CS_3, 1,
+ AC_R|AC_W|AC_X|SA_G|SA_I )
tlbtab_end
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index cbb2839..5435de1 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -62,11 +62,13 @@
#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC correcting on */
#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#ifdef CFG_ENABLE_SDRAM_CACHE
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on DDR2 */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on DDR2 */
-#endif
+#define ECC_RAM 0x03267F0B
+#define NO_ECC_RAM 0x00267F0B
+
+#define HCU_HW_SDRAM_CONFIG_MASK 0x7
+
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
+ /* disable caching on DDR2 */
void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
@@ -74,6 +76,7 @@
{
PPC4xx_SYS_INFO board_cfg;
u32 val;
+
mfsdram(DDR0_22, val);
val &= DDR0_22_CTRL_RAW_MASK;
switch (val) {
@@ -157,38 +160,35 @@
/*---------------------------------------------------------------------------+
* program_ecc.
*---------------------------------------------------------------------------*/
-static void program_ecc(unsigned long start_address, unsigned long num_bytes,
- unsigned long tlb_word2_i_value)
+static void program_ecc(unsigned long start_address, unsigned long num_bytes)
{
- unsigned long current_address= start_address;
- int loopi = 0;
u32 val;
-
char str[] = "ECC generation -";
- char slash[] = "\\|/-\\|/-";
+#if defined(CONFIG_PRAM)
+ u32 *magic;
+
+ /* Check whether vxWorks is using EDR logging, if yes zero */
+ /* also PostMortem and user reserved memory */
+ magic = (u32 *)in_be32((u32 *)(start_address + num_bytes -
+ (CONFIG_PRAM*1024) + sizeof(u32)));
+
+ debug("\n%s: CONFIG_PRAM %d kB magic 0x%x 0x%p -> 0x%x\n", __FUNCTION__,
+ CONFIG_PRAM,
+ start_address + num_bytes - (CONFIG_PRAM*1024) + sizeof(u32),
+ magic, in_be32(magic));
+ if (in_be32(magic) == 0xbeefbabe)
+ num_bytes -= (CONFIG_PRAM*1024) - PM_RESERVED_MEM;
+#endif
sync();
eieio();
puts(str);
- if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
- /* ECC bit set method for non-cached memory */
- /* This takes various seconds */
- for(current_address = 0; current_address < num_bytes;
- current_address += sizeof(u32)) {
- *(u32 *)current_address = 0;
- if ((current_address % (2 << 20)) == 0) {
- putc('\b');
- putc(slash[loopi++ % 8]);
- }
- }
- } else {
- /* ECC bit set method for cached memory */
- /* Fast method, no noticeable delay */
- dcbz_area(start_address, num_bytes);
- dflush();
- }
+ /* ECC bit set method for cached memory */
+ /* Fast method, no noticeable delay */
+ dcbz_area(start_address, num_bytes);
+ dflush();
blank_string(strlen(str));
/* Clear error status */
@@ -196,7 +196,7 @@
mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
/*
- * Clear possible errors
+ * Clear possible ECC errors
* If not done, then we could get an interrupt later on when
* exceptions are enabled.
*/
@@ -209,9 +209,9 @@
return;
}
-
#endif
+
/***********************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
@@ -219,9 +219,6 @@
************************************************************************/
long int initdram (int board_type)
{
-#define HCU_HW_SDRAM_CONFIG_MASK 0x7
-#define INVALID_HW_CONFIG "Invalid HW-Config"
- u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER;
unsigned int dram_size = 0;
mtsdram(DDR0_02, 0x00000000);
@@ -232,24 +229,23 @@
mtsdram(DDR0_03, 0x02030602);
mtsdram(DDR0_04, 0x0A020200);
mtsdram(DDR0_05, 0x02020307);
- switch (*hwVersReg & HCU_HW_SDRAM_CONFIG_MASK) {
- case 0:
- dram_size = 128 * 1024 * 1024 ;
- mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */
- mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */
- mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */
- break;
+ switch (in_be16((u16 *)HCU_HW_VERSION_REGISTER) & HCU_HW_SDRAM_CONFIG_MASK) {
case 1:
dram_size = 256 * 1024 * 1024 ;
mtsdram(DDR0_06, 0x0102C812); /* 256MB RAM */
mtsdram(DDR0_11, 0x0014C800); /* 256MB RAM */
mtsdram(DDR0_43, 0x030A0200); /* 256MB RAM */
break;
+ case 0:
default:
- sdram_panic(INVALID_HW_CONFIG);
+ dram_size = 128 * 1024 * 1024 ;
+ mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */
+ mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */
+ mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */
break;
}
mtsdram(DDR0_07, 0x00090100);
+
/*
* TCPD=200 cycles of clock input is required to lock the DLL.
* CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001);
@@ -264,8 +260,6 @@
mtsdram(DDR0_19, 0x1D1D1D1D);
mtsdram(DDR0_20, 0x0B0B0B0B);
mtsdram(DDR0_21, 0x0B0B0B0B);
- #define ECC_RAM 0x03267F0B
- #define NO_ECC_RAM 0x00267F0B
#ifdef CONFIG_DDR_ECC
mtsdram(DDR0_22, ECC_RAM);
#else
@@ -288,7 +282,7 @@
* Program tlb entries for this size (dynamic)
*/
remove_tlb(CFG_SDRAM_BASE, 256 << 20);
- program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+ program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual
@@ -296,13 +290,11 @@
*/
program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0);
- /* Diminish RAM to initialize */
- dram_size = dram_size - 32 ;
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
*/
- program_ecc(CFG_DDR_CACHED_ADDR, dram_size, 0);
+ program_ecc(CFG_DDR_CACHED_ADDR, dram_size);
#endif
return (dram_size);
diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds
index c517f7b..2c48316 100644
--- a/board/netstal/hcu5/u-boot.lds
+++ b/board/netstal/hcu5/u-boot.lds
@@ -137,7 +137,7 @@
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
diff --git a/board/pm854/Makefile b/board/pm854/Makefile
index 2913650..be24388 100644
--- a/board/pm854/Makefile
+++ b/board/pm854/Makefile
@@ -25,9 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/pm854/init.S b/board/pm854/init.S
deleted file mode 100644
index 0a403ab..0000000
--- a/board/pm854/init.S
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 64M Non-cacheable, guarded
- * 0xfc000000 64M FLASH (8,16,32 or 64 MB)
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(0xfc000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(0xfc000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-#if !defined(CONFIG_SPD_EEPROM)
- /*
- * TLB 7: 256M DDR
- * 0x00000000 256M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
-
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x05
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4
- entry_end
diff --git a/board/pm854/law.c b/board/pm854/law.c
new file mode 100644
index 0000000..cb6b37f
--- /dev/null
+++ b/board/pm854/law.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf800_0000 0xf80f_ffff BCSR 1M
+ * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ /* This is not so much the SDRAM map as it is the whole localbus map. */
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/pm854/tlb.c b/board/pm854/tlb.c
new file mode 100644
index 0000000..5d87537
--- /dev/null
+++ b/board/pm854/tlb.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 64M Non-cacheable, guarded
+ * 0xfc000000 64M FLASH (8,16,32 or 64 MB)
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, 0xfc000000, 0xfc000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+#if !defined(CONFIG_SPD_EEPROM)
+ /*
+ * TLB 7: 256M DDR
+ * 0x00000000 256M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 7, BOOKE_PAGESZ_256M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/pm854/u-boot.lds b/board/pm854/u-boot.lds
index 9feaf55..86f8f13 100644
--- a/board/pm854/u-boot.lds
+++ b/board/pm854/u-boot.lds
@@ -35,7 +35,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/pm854/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -65,7 +64,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/pm854/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/pm856/Makefile b/board/pm856/Makefile
index 2913650..be24388 100644
--- a/board/pm856/Makefile
+++ b/board/pm856/Makefile
@@ -25,9 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/pm856/init.S b/board/pm856/init.S
deleted file mode 100644
index 0a403ab..0000000
--- a/board/pm856/init.S
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 64M Non-cacheable, guarded
- * 0xfc000000 64M FLASH (8,16,32 or 64 MB)
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(0xfc000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(0xfc000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-#if !defined(CONFIG_SPD_EEPROM)
- /*
- * TLB 7: 256M DDR
- * 0x00000000 256M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
-
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x05
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4
- entry_end
diff --git a/board/pm856/law.c b/board/pm856/law.c
new file mode 100644
index 0000000..cb6b37f
--- /dev/null
+++ b/board/pm856/law.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf800_0000 0xf80f_ffff BCSR 1M
+ * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ /* This is not so much the SDRAM map as it is the whole localbus map. */
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/pm856/tlb.c b/board/pm856/tlb.c
new file mode 100644
index 0000000..5d87537
--- /dev/null
+++ b/board/pm856/tlb.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 64M Non-cacheable, guarded
+ * 0xfc000000 64M FLASH (8,16,32 or 64 MB)
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, 0xfc000000, 0xfc000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+#if !defined(CONFIG_SPD_EEPROM)
+ /*
+ * TLB 7: 256M DDR
+ * 0x00000000 256M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 7, BOOKE_PAGESZ_256M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/pm856/u-boot.lds b/board/pm856/u-boot.lds
index c68f05a..6cfddea 100644
--- a/board/pm856/u-boot.lds
+++ b/board/pm856/u-boot.lds
@@ -36,7 +36,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/pm856/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -66,7 +65,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/pm856/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/sbc8548/Makefile b/board/sbc8548/Makefile
index 1596525..4b2a9f6 100644
--- a/board/sbc8548/Makefile
+++ b/board/sbc8548/Makefile
@@ -28,9 +28,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/sbc8548/init.S b/board/sbc8548/init.S
deleted file mode 100644
index cafa214..0000000
--- a/board/sbc8548/init.S
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
- * Copyright 2007 Embedded Specialties, Inc.
- *
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xe4010000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 0: 16M Non-cacheable, guarded
- * 0xff800000 16M TLB for 8MB FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Cacheable, non-guarded
- * 0x0 256M DDR SDRAM
- */
- #if !defined(CONFIG_SPD_EEPROM)
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- #endif
-
- /*
- * TLB 4: 64M Non-cacheable, guarded
- * 0xe0000000 1M CCSRBAR
- * 0xe2000000 16M PCI1 IO
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Cacheable, non-guarded
- * 0xf0000000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 16M Cacheable, non-guarded
- * 0xf8000000 1M 7-segment LED display
- * 0xf8100000 1M User switches
- * 0xf8300000 1M Board revision
- * 0xf8b00000 1M EEPROM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_EPLD_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_EPLD_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x0fff_ffff DDR 256M
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf8b0_0000 0xf80f_ffff EEPROM 1M
- * 0xfb80_0000 0xff7f_ffff FLASH (2nd bank) 64M
- * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-
-#if !defined(CONFIG_SPD_EEPROM)
- #define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
- #define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
-#else
- #define LAWBAR0 0
- #define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR3 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
- .section .bootpg, "ax"
- .globl law_entry
-
-law_entry:
- entry_start
- .long 4
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- entry_end
diff --git a/board/sbc8548/law.c b/board/sbc8548/law.c
new file mode 100644
index 0000000..d903cdc
--- /dev/null
+++ b/board/sbc8548/law.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x0fff_ffff DDR 256M
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf8b0_0000 0xf80f_ffff EEPROM 1M
+ * 0xfb80_0000 0xff7f_ffff FLASH (2nd bank) 64M
+ * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+ SET_LAW_ENTRY(4, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c
new file mode 100644
index 0000000..8d6625e
--- /dev/null
+++ b/board/sbc8548/tlb.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff800000 16M TLB for 8MB FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Cacheable, non-guarded
+ * 0x0 256M DDR SDRAM
+ */
+ #if !defined(CONFIG_SPD_EEPROM)
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+ #endif
+
+ /*
+ * TLB 4: 64M Non-cacheable, guarded
+ * 0xe0000000 1M CCSRBAR
+ * 0xe2000000 16M PCI1 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 5: 64M Cacheable, non-guarded
+ * 0xf0000000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 16M Cacheable, non-guarded
+ * 0xf8000000 1M 7-segment LED display
+ * 0xf8100000 1M User switches
+ * 0xf8300000 1M Board revision
+ * 0xf8b00000 1M EEPROM
+ */
+ SET_TLB_ENTRY(1, CFG_EPLD_BASE, CFG_EPLD_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_16M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/sbc8548/u-boot.lds b/board/sbc8548/u-boot.lds
index 8e301d4..d701096 100644
--- a/board/sbc8548/u-boot.lds
+++ b/board/sbc8548/u-boot.lds
@@ -34,7 +34,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/sbc8548/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -64,7 +63,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/sbc8548/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/board/sbc8560/Makefile b/board/sbc8560/Makefile
index 1596525..4b2a9f6 100644
--- a/board/sbc8560/Makefile
+++ b/board/sbc8560/Makefile
@@ -28,9 +28,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/sbc8560/init.S b/board/sbc8560/init.S
deleted file mode 100644
index 95cb85a..0000000
--- a/board/sbc8560/init.S
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
-* Copyright (C) 2002,2003, Motorola Inc.
-* Xianghua Xiao <X.Xiao@motorola.com>
-*
-* (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
-* Added support for Wind River SBC8560 board
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
-/* LAW(Local Access Window) configuration:
- * 0000_0000-0800_0000: DDR(512M) -or- larger
- * c000_0000-cfff_ffff: PCI(256M)
- * d000_0000-dfff_ffff: RapidIO(256M)
- * e000_0000-ffff_ffff: localbus(512M)
- * e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6
- * e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1
- * e800_0000-efff_ffff: LBC 128M, nothing here
- * f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3
- * f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4
- * f800_0000-fdff_ffff: LBC 64M, nothing here
- * fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5
- * fd00_0000-fdff_ffff: LBC 16M, nothing here
- * fe00_0000-feff_ffff: LBC 16M, nothing here
- * ff00_0000-ff6f_ffff: LBC 7M, nothing here
- * ff70_0000-ff7f_ffff: CCSRBAR 1M
- * ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0
- * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
- * Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
- #define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
- #define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
-#else
- #define LAWBAR0 0
- #define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR2 ((0xe0000000>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x03
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
- entry_end
-
-/* TLB1 entries configuration: */
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-
-tlb1_entry:
- entry_start
-
- .long 0x08 /* the following data table uses a few of 16 TLB entries */
-
-/* TLB for CCSRBAR (IMMR) */
-
- .long FSL_BOOKE_MAS0(1,1,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
-/* TLB for Local Bus stuff, just map the whole 512M */
-/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */
-
- .long FSL_BOOKE_MAS0(1,2,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(0xe0000000,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(0xe0000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,3,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(0xf0000000,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(0xf0000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
-#if !defined(CONFIG_SPD_EEPROM)
- .long FSL_BOOKE_MAS0(1,4,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE,0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,5,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE+0x10000000,0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x10000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-#else
- .long FSL_BOOKE_MAS0(1,4,0)
- .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(0,0)
- .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,5,0)
- .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(0,0)
- .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
-
- .long FSL_BOOKE_MAS0(1,6,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
-#ifdef CONFIG_L2_INIT_RAM
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0,0,0,1,0,0,0,0)
-#else
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0)
-#endif
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1,7,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI_MEM_BASE,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI_MEM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- .long FSL_BOOKE_MAS0(1,15,0)
- .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT,(MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-#else
- .long FSL_BOOKE_MAS0(1,15,0)
- .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long FSL_BOOKE_MAS2(0,0)
- .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
- entry_end
diff --git a/board/sbc8560/law.c b/board/sbc8560/law.c
new file mode 100644
index 0000000..e370853
--- /dev/null
+++ b/board/sbc8560/law.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-0800_0000: DDR(512M) -or- larger
+ * c000_0000-cfff_ffff: PCI(256M)
+ * d000_0000-dfff_ffff: RapidIO(256M)
+ * e000_0000-ffff_ffff: localbus(512M)
+ * e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6
+ * e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1
+ * e800_0000-efff_ffff: LBC 128M, nothing here
+ * f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3
+ * f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4
+ * f800_0000-fdff_ffff: LBC 64M, nothing here
+ * fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5
+ * fd00_0000-fdff_ffff: LBC 16M, nothing here
+ * fe00_0000-feff_ffff: LBC 16M, nothing here
+ * ff00_0000-ff6f_ffff: LBC 7M, nothing here
+ * ff70_0000-ff7f_ffff: CCSRBAR 1M
+ * ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0
+ * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
+ * Window.
+ * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8560/tlb.c b/board/sbc8560/tlb.c
new file mode 100644
index 0000000..155ff64
--- /dev/null
+++ b/board/sbc8560/tlb.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+/* TLB for CCSRBAR (IMMR) */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1M, 1),
+
+/* TLB for Local Bus stuff, just map the whole 512M */
+/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */
+
+ SET_TLB_ENTRY(1, 0xe0000000, 0xe0000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, 0xf0000000, 0xf0000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+#if !defined(CONFIG_SPD_EEPROM)
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+#endif
+
+ SET_TLB_ENTRY(1, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_16K, 1),
+
+ SET_TLB_ENTRY(1, CFG_PCI_MEM_PHYS, CFG_PCI_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_256M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/sbc8560/u-boot.lds b/board/sbc8560/u-boot.lds
index 449fed8..f3dbf26 100644
--- a/board/sbc8560/u-boot.lds
+++ b/board/sbc8560/u-boot.lds
@@ -38,7 +38,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/sbc8560/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -68,7 +67,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/sbc8560/init.o (.text)
cpu/mpc85xx/commproc.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
diff --git a/board/stxgp3/Makefile b/board/stxgp3/Makefile
index 7d52f8c..28d6cb9 100644
--- a/board/stxgp3/Makefile
+++ b/board/stxgp3/Makefile
@@ -25,9 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o flash.o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o flash.o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/stxgp3/init.S b/board/stxgp3/init.S
deleted file mode 100644
index f491a57..0000000
--- a/board/stxgp3/init.S
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2004 Embedded Edge, LLC
- * Dan Malek <dan@embeddededge.com>
- * Copied from ADS85xx.
- * Updates for Silicon Tx GP3 8560. We only support 32-bit flash
- * and DDR with SPD EEPROM configuration.
- *
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 16M Non-cacheable, guarded
- * 0xff000000 16M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Cacheable, non-guarded
- * 0xf000_0000 64M LBC SDRAM
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 7: 16K Non-cacheable, guarded
- * 0xfc000000 16K Configuration Latch register
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64K)
- .long FSL_BOOKE_MAS2(CFG_LBC_LCLDEVS_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_LBC_LCLDEVS_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-#if !defined(CONFIG_SPD_EEPROM)
- /*
- * TLB 8, 9: 128M DDR
- * 0x00000000 64M DDR System memory
- * 0x04000000 64M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
-#error("Update the number of table entries in tlb1_entry")
- .long FSL_BOOKE_MAS0(1, 8, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(1, 9, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0)
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#endif
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xfc00_0000 0xfc00_ffff Config Latch 64K
- * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/*
- * This is not so much the SDRAM map as it is the whole localbus map.
- */
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x05
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4
- entry_end
diff --git a/board/stxgp3/law.c b/board/stxgp3/law.c
new file mode 100644
index 0000000..312b3c5
--- /dev/null
+++ b/board/stxgp3/law.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xfc00_0000 0xfc00_ffff Config Latch 64K
+ * 0xff00_0000 0xffff_ffff FLASH (boot bank) 16M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ /* This is not so much the SDRAM map as it is the whole localbus map. */
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/stxgp3/tlb.c b/board/stxgp3/tlb.c
new file mode 100644
index 0000000..529f230
--- /dev/null
+++ b/board/stxgp3/tlb.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff000000 16M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_16M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 64M Cacheable, non-guarded
+ * 0xf000_0000 64M LBC SDRAM
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7: 16K Non-cacheable, guarded
+ * 0xfc000000 16K Configuration Latch register
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_LCLDEVS_BASE, CFG_LBC_LCLDEVS_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_16K, 1),
+
+#if !defined(CONFIG_SPD_EEPROM)
+ /*
+ * TLB 8, 9: 128M DDR
+ * 0x00000000 64M DDR System memory
+ * 0x04000000 64M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+#error("Update the number of table entries in tlb1_entry")
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_64M, 1),
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 9, BOOKE_PAGESZ_64M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/stxgp3/u-boot.lds b/board/stxgp3/u-boot.lds
index 3f9bc55..4a9a103 100644
--- a/board/stxgp3/u-boot.lds
+++ b/board/stxgp3/u-boot.lds
@@ -40,7 +40,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/stxgp3/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -70,7 +69,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/stxgp3/init.o (.text)
cpu/mpc85xx/commproc.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
diff --git a/board/stxssa/Makefile b/board/stxssa/Makefile
index 344ecdf..f1f5d0b 100644
--- a/board/stxssa/Makefile
+++ b/board/stxssa/Makefile
@@ -25,8 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-SOBJS := init.o
+COBJS := $(BOARD).o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/stxssa/init.S b/board/stxssa/init.S
deleted file mode 100644
index 82dafb8..0000000
--- a/board/stxssa/init.S
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright (C) 2005 Embedded Alley Solutions, Inc.
- * Dan Malek <dan@embeddedalley.com>
- * Copied from STx GP3.
- * Updates for Silicon Tx GP3 SSA. We only support 32-bit flash
- * and DDR with SPD EEPROM configuration.
- *
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 12
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /*
- * TLB0 4K Non-cacheable, guarded
- * 0xff700000 4K Initial CCSRBAR mapping
- *
- * This ends up at a TLB0 Index==0 entry, and must not collide
- * with other TLB0 Entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0: 64M Non-cacheable, guarded
- * 0xfc000000 6M4 FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0xa0000000 256M PCI2 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xb0000000 256M PCI2 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- * 0xe300_0000 16M PCI2 IO
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 256M Non-cacheable, guarded
- * 0xf0000000 Local bus expansion option.
- * 0xfb000000 Configuration Latch register (one word)
- * 0xfc000000 Up to 64M flash
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_LBC_OPTION_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_LBC_OPTION_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
- * 0xf000_0000 0xfaff_ffff Local bus 128M
- * 0xfb00_0000 0xfb00_ffff Config Latch 64K
- * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/* Map the whole localbus, including flash and reset latch.
-*/
-#define LAWBAR5 ((CFG_LBC_OPTION_BASE>>12) & 0xfffff)
-#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 6
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
- entry_end
diff --git a/board/stxssa/law.c b/board/stxssa/law.c
new file mode 100644
index 0000000..2b25292
--- /dev/null
+++ b/board/stxssa/law.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
+ * 0xf000_0000 0xfaff_ffff Local bus 128M
+ * 0xfb00_0000 0xfb00_ffff Config Latch 64K
+ * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW_ENTRY(3, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+ SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+ /* Map the whole localbus, including flash and reset latch. */
+ SET_LAW_ENTRY(6, CFG_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/stxssa/tlb.c b/board/stxssa/tlb.c
new file mode 100644
index 0000000..46b1440
--- /dev/null
+++ b/board/stxssa/tlb.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /*
+ * TLB 0: 64M Non-cacheable, guarded
+ * 0xfc000000 6M4 FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0xa0000000 256M PCI2 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xb0000000 256M PCI2 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ * 0xe300_0000 16M PCI2 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 6: 256M Non-cacheable, guarded
+ * 0xf0000000 Local bus expansion option.
+ * 0xfb000000 Configuration Latch register (one word)
+ * 0xfc000000 Up to 64M flash
+ */
+ SET_TLB_ENTRY(1, CFG_LBC_OPTION_BASE, CFG_LBC_OPTION_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_256M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/stxssa/u-boot.lds b/board/stxssa/u-boot.lds
index a0ba125..99a8a8b 100644
--- a/board/stxssa/u-boot.lds
+++ b/board/stxssa/u-boot.lds
@@ -40,7 +40,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/stxssa/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -70,7 +69,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/stxssa/init.o (.text)
cpu/mpc85xx/commproc.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
diff --git a/board/tqm85xx/Makefile b/board/tqm85xx/Makefile
index cad7e1e..52f5ef9 100644
--- a/board/tqm85xx/Makefile
+++ b/board/tqm85xx/Makefile
@@ -25,9 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o sdram.o
-SOBJS := init.o
-#SOBJS :=
+COBJS := $(BOARD).o sdram.o law.o tlb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/tqm85xx/init.S b/board/tqm85xx/init.S
deleted file mode 100644
index dcb9386..0000000
--- a/board/tqm85xx/init.S
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2002,2003, Motorola Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define entry_start \
- mflr r1 ; \
- bl 0f ;
-
-#define entry_end \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-
- .section .bootpg, "ax"
- .globl tlb1_entry
-tlb1_entry:
- entry_start
-
- /*
- * Number of TLB0 and TLB1 entries in the following table
- */
- .long 13
-
- /*
- * TLB0 16K Cacheable, non-guarded
- * 0xd001_0000 16K Temporary Global data for initialization
- *
- * Use four 4K TLB0 entries. These entries must be cacheable
- * as they provide the bootstrap memory before the memory
- * controler and real memory have been configured.
- *
- * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
- * and must not collide with other TLB0 entries.
- */
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- .long FSL_BOOKE_MAS0(0, 0, 0)
- .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
- .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
- .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
-
- /*
- * TLB 0, 1: 128M Non-cacheable, guarded
- * 0xf8000000 128M FLASH
- * Out of reset this entry is only 4K.
- */
- .long FSL_BOOKE_MAS0(1, 1, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long FSL_BOOKE_MAS0(1, 0, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_FLASH_BASE+0x4000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_FLASH_BASE+0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 2, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 3, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- .long FSL_BOOKE_MAS0(1, 4, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- .long FSL_BOOKE_MAS0(1, 5, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 6: 64M Non-cacheable, guarded
- * 0xe000_0000 1M CCSRBAR
- * 0xe200_0000 16M PCI1 IO
- */
- .long FSL_BOOKE_MAS0(1, 6, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- /*
- * TLB 7+8: 512M DDR, cache disabled (needed for memory test)
- * 0x00000000 512M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
- .long FSL_BOOKE_MAS0(1, 7, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long FSL_BOOKE_MAS0(1, 8, 0)
- .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE+0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
-
- entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_LBC_FLASH_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x05
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4
- entry_end
diff --git a/board/tqm85xx/law.c b/board/tqm85xx/law.c
new file mode 100644
index 0000000..224af6c
--- /dev/null
+++ b/board/tqm85xx/law.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf800_0000 0xf80f_ffff BCSR 1M
+ * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/tqm85xx/tlb.c b/board/tqm85xx/tlb.c
new file mode 100644
index 0000000..a178cfe
--- /dev/null
+++ b/board/tqm85xx/tlb.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+
+ /*
+ * TLB 0, 1: 128M Non-cacheable, guarded
+ * 0xf8000000 128M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_64M, 1),
+ SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 3: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 4: 256M Non-cacheable, guarded
+ * 0xc0000000 256M Rapid IO MEM First half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 5: 256M Non-cacheable, guarded
+ * 0xd0000000 256M Rapid IO MEM Second half
+ */
+ SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+
+ /*
+ * TLB 6: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 16M PCI1 IO
+ */
+ SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_64M, 1),
+
+ /*
+ * TLB 7+8: 512M DDR, cache disabled (needed for memory test)
+ * 0x00000000 512M DDR System memory
+ * Without SPD EEPROM configured DDR, this must be setup manually.
+ * Make sure the TLB count at the top of this table is correct.
+ * Likely it needs to be increased by two for these entries.
+ */
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 8, BOOKE_PAGESZ_256M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/tqm85xx/u-boot.lds b/board/tqm85xx/u-boot.lds
index a8ca3c8..6c1f904 100644
--- a/board/tqm85xx/u-boot.lds
+++ b/board/tqm85xx/u-boot.lds
@@ -35,7 +35,6 @@
.bootpg 0xFFFFF000 :
{
cpu/mpc85xx/start.o (.bootpg)
- board/tqm85xx/init.o (.bootpg)
} = 0xffff
/* Read-only sections, merged into text segment: */
@@ -65,7 +64,6 @@
.text :
{
cpu/mpc85xx/start.o (.text)
- board/tqm85xx/init.o (.text)
cpu/mpc85xx/traps.o (.text)
cpu/mpc85xx/interrupts.o (.text)
cpu/mpc85xx/cpu_init.o (.text)
diff --git a/common/cmd_mac.c b/common/cmd_mac.c
index 0add432..faed8f7 100644
--- a/common/cmd_mac.c
+++ b/common/cmd_mac.c
@@ -33,7 +33,7 @@
"mac - display and program the system ID and MAC addresses in EEPROM\n",
"[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n"
"read\n"
- " - show content of mac\n"
+ " - show content of EEPROM\n"
"mac save\n"
" - save to the EEPROM\n"
"mac id\n"
@@ -43,7 +43,7 @@
"mac errata\n"
" - program errata data\n"
"mac date\n"
- " - program data date\n"
+ " - program date\n"
"mac ports\n"
" - program the number of ports\n"
"mac 0\n"
diff --git a/common/cmd_net.c b/common/cmd_net.c
index 21682c0..56eb684 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -87,7 +87,7 @@
U_BOOT_CMD(
nfs, 3, 1, do_nfs,
"nfs\t- boot image via network using NFS protocol\n",
- "[loadAddress] [host ip addr:bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]\n"
);
#endif
diff --git a/cpu/mcf5227x/Makefile b/cpu/mcf5227x/Makefile
new file mode 100644
index 0000000..d0e9b45
--- /dev/null
+++ b/cpu/mcf5227x/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# CFLAGS += -DET_DEBUG
+
+LIB = lib$(CPU).a
+
+START = start.o
+COBJS = cpu.o speed.o cpu_init.o interrupts.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/mcf5227x/config.mk b/cpu/mcf5227x/config.mk
new file mode 100644
index 0000000..8d60fd6
--- /dev/null
+++ b/cpu/mcf5227x/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=5208 -fPIC
+else
+PLATFORM_CPPFLAGS += -m5307 -fPIC
+endif
diff --git a/cpu/mcf5227x/cpu.c b/cpu/mcf5227x/cpu.c
new file mode 100644
index 0000000..5792a1c
--- /dev/null
+++ b/cpu/mcf5227x/cpu.c
@@ -0,0 +1,75 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ volatile rcm_t *rcm = (rcm_t *) (MMAP_RCM);
+ udelay(1000);
+ rcm->rcr |= RCM_RCR_SOFTRST;
+
+ /* we don't return! */
+ return 0;
+};
+
+int checkcpu(void)
+{
+ volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
+ u16 msk;
+ u16 id = 0;
+ u8 ver;
+
+ puts("CPU: ");
+ msk = (ccm->cir >> 6);
+ ver = (ccm->cir & 0x003f);
+ switch (msk) {
+ case 0x6c:
+ id = 52277;
+ break;
+ }
+
+ if (id) {
+ printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
+ ver);
+ printf(" CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n",
+ (int)(gd->cpu_clk / 1000000),
+ (int)(gd->bus_clk / 1000000),
+ (int)(gd->flb_clk / 1000000));
+ printf(" INP CLK %d Mhz VCO CLK %d Mhz\n",
+ (int)(gd->inp_clk / 1000000),
+ (int)(gd->vco_clk / 1000000));
+ }
+
+ return 0;
+}
diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c
new file mode 100644
index 0000000..71b053d
--- /dev/null
+++ b/cpu/mcf5227x/cpu_init.c
@@ -0,0 +1,146 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+
+#include <asm/immap.h>
+#include <asm/rtc.h>
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f(void)
+{
+ volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+ volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
+
+ /* Workaround, must place before fbcs */
+ pll->psr = 0x12;
+
+ scm1->mpr = 0x77777777;
+ scm1->pacra = 0;
+ scm1->pacrb = 0;
+ scm1->pacrc = 0;
+ scm1->pacrd = 0;
+ scm1->pacre = 0;
+ scm1->pacrf = 0;
+ scm1->pacrg = 0;
+ scm1->pacri = 0;
+
+#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
+ fbcs->csar0 = CFG_CS0_BASE;
+ fbcs->cscr0 = CFG_CS0_CTRL;
+ fbcs->csmr0 = CFG_CS0_MASK;
+#endif
+
+#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+ fbcs->csar1 = CFG_CS1_BASE;
+ fbcs->cscr1 = CFG_CS1_CTRL;
+ fbcs->csmr1 = CFG_CS1_MASK;
+#endif
+
+#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
+ fbcs->csar2 = CFG_CS2_BASE;
+ fbcs->cscr2 = CFG_CS2_CTRL;
+ fbcs->csmr2 = CFG_CS2_MASK;
+#endif
+
+#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
+ fbcs->csar3 = CFG_CS3_BASE;
+ fbcs->cscr3 = CFG_CS3_CTRL;
+ fbcs->csmr3 = CFG_CS3_MASK;
+#endif
+
+#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
+ fbcs->csar4 = CFG_CS4_BASE;
+ fbcs->cscr4 = CFG_CS4_CTRL;
+ fbcs->csmr4 = CFG_CS4_MASK;
+#endif
+
+#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
+ fbcs->csar5 = CFG_CS5_BASE;
+ fbcs->cscr5 = CFG_CS5_CTRL;
+ fbcs->csmr5 = CFG_CS5_MASK;
+#endif
+
+#ifdef CONFIG_FSL_I2C
+ gpio->par_i2c = GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA;
+#endif
+
+ icache_enable();
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r(void)
+{
+#ifdef CONFIG_MCFTMR
+ volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE);
+ volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
+ u32 oscillator = CFG_RTC_OSCILLATOR;
+
+ rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF;
+ rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF;
+#endif
+
+ return (0);
+}
+
+void uart_port_conf(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ /* Setup Ports: */
+ switch (CFG_UART_PORT) {
+ case 0:
+ gpio->par_uart &=
+ (GPIO_PAR_UART_U0TXD_MASK & GPIO_PAR_UART_U0RXD_MASK);
+ gpio->par_uart |=
+ (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
+ break;
+ case 1:
+ gpio->par_uart &=
+ (GPIO_PAR_UART_U1TXD_MASK & GPIO_PAR_UART_U1RXD_MASK);
+ gpio->par_uart |=
+ (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
+ break;
+ case 2:
+ gpio->par_dspi &=
+ (GPIO_PAR_DSPI_SIN_MASK & GPIO_PAR_DSPI_SOUT_MASK);
+ gpio->par_dspi =
+ (GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD);
+ break;
+ }
+}
diff --git a/cpu/mcf5227x/interrupts.c b/cpu/mcf5227x/interrupts.c
new file mode 100644
index 0000000..9572a7b
--- /dev/null
+++ b/cpu/mcf5227x/interrupts.c
@@ -0,0 +1,52 @@
+/*
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* CPU specific interrupt routine */
+#include <common.h>
+#include <asm/immap.h>
+
+int interrupt_init(void)
+{
+ volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+
+ /* Make sure all interrupts are disabled */
+ intp->imrh0 |= 0xFFFFFFFF;
+ intp->imrl0 |= 0xFFFFFFFF;
+
+ enable_interrupts();
+ return 0;
+}
+
+#if defined(CONFIG_MCFTMR)
+void dtimer_intr_setup(void)
+{
+ volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+
+ intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
+ intp->imrh0 &= ~CFG_TMRINTR_MASK;
+}
+#endif
diff --git a/cpu/mcf5227x/speed.c b/cpu/mcf5227x/speed.c
new file mode 100644
index 0000000..78c946f
--- /dev/null
+++ b/cpu/mcf5227x/speed.c
@@ -0,0 +1,120 @@
+/*
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Low Power Divider specifications
+ */
+#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */
+#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */
+
+#define CLOCK_PLL_FVCO_MAX 540000000
+#define CLOCK_PLL_FVCO_MIN 300000000
+
+#define CLOCK_PLL_FSYS_MAX 266666666
+#define CLOCK_PLL_FSYS_MIN 100000000
+#define MHZ 1000000
+
+void clock_enter_limp(int lpdiv)
+{
+ volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
+ int i, j;
+
+ /* Check bounds of divider */
+ if (lpdiv < CLOCK_LPD_MIN)
+ lpdiv = CLOCK_LPD_MIN;
+ if (lpdiv > CLOCK_LPD_MAX)
+ lpdiv = CLOCK_LPD_MAX;
+
+ /* Round divider down to nearest power of two */
+ for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ;
+
+ /* Apply the divider to the system clock */
+ ccm->cdr = (ccm->cdr & 0xF0FF) | CCM_CDR_LPDIV(i);
+
+ /* Enable Limp Mode */
+ ccm->misccr |= CCM_MISCCR_LIMP;
+}
+
+/*
+ * brief Exit Limp mode
+ * warning The PLL should be set and locked prior to exiting Limp mode
+ */
+void clock_exit_limp(void)
+{
+ volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
+ volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
+
+ /* Exit Limp mode */
+ ccm->misccr &= ~CCM_MISCCR_LIMP;
+
+ /* Wait for the PLL to lock */
+ while (!(pll->psr & PLL_PSR_LOCK)) ;
+}
+
+/*
+ * get_clocks() fills in gd->cpu_clock and gd->bus_clk
+ */
+int get_clocks(void)
+{
+
+ volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM;
+ volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
+ int vco, temp, pcrvalue, pfdr;
+ u8 bootmode;
+
+ bootmode = (ccm->ccr & 0x000C) >> 2;
+
+ pcrvalue = pll->pcr & 0xFF0F0FFF;
+ pfdr = pcrvalue >> 24;
+
+ if (pfdr != 0x1E) {
+ /* serial mode */
+ } else {
+ /* Normal Mode */
+ vco = pfdr * CFG_INPUT_CLKSRC;
+ gd->vco_clk = vco;
+ }
+
+ if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
+ /* Limp mode */
+ } else {
+ gd->inp_clk = CFG_INPUT_CLKSRC; /* Input clock */
+
+ temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1;
+ gd->cpu_clk = vco / temp; /* cpu clock */
+
+ temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
+ gd->flb_clk = vco / temp; /* flexbus clock */
+ gd->bus_clk = gd->flb_clk;
+ }
+
+ return (0);
+}
diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S
new file mode 100644
index 0000000..0e2db12
--- /dev/null
+++ b/cpu/mcf5227x/start.S
@@ -0,0 +1,356 @@
+/*
+ * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include "version.h"
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* last three long word reserved for cache status */
+#define ICACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4)
+#define DCACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8)
+#define CACR_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12)
+
+#define _START _start
+#define _FAULT _fault
+
+#define SAVE_ALL \
+ move.w #0x2700,%sr; /* disable intrs */ \
+ subl #60,%sp; /* space for 15 regs */ \
+ moveml %d0-%d7/%a0-%a6,%sp@;
+
+#define RESTORE_ALL \
+ moveml %sp@,%d0-%d7/%a0-%a6; \
+ addl #60,%sp; /* space for 15 regs */ \
+ rte;
+
+.text
+/*
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
+ */
+_vectors:
+
+INITSP: .long 0x00000000 /* Initial SP */
+INITPC: .long _START /* Initial PC */
+vector02: .long _FAULT /* Access Error */
+vector03: .long _FAULT /* Address Error */
+vector04: .long _FAULT /* Illegal Instruction */
+vector05: .long _FAULT /* Reserved */
+vector06: .long _FAULT /* Reserved */
+vector07: .long _FAULT /* Reserved */
+vector08: .long _FAULT /* Privilege Violation */
+vector09: .long _FAULT /* Trace */
+vector0A: .long _FAULT /* Unimplemented A-Line */
+vector0B: .long _FAULT /* Unimplemented F-Line */
+vector0C: .long _FAULT /* Debug Interrupt */
+vector0D: .long _FAULT /* Reserved */
+vector0E: .long _FAULT /* Format Error */
+vector0F: .long _FAULT /* Unitialized Int. */
+
+/* Reserved */
+vector10_17:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector18: .long _FAULT /* Spurious Interrupt */
+vector19: .long _FAULT /* Autovector Level 1 */
+vector1A: .long _FAULT /* Autovector Level 2 */
+vector1B: .long _FAULT /* Autovector Level 3 */
+vector1C: .long _FAULT /* Autovector Level 4 */
+vector1D: .long _FAULT /* Autovector Level 5 */
+vector1E: .long _FAULT /* Autovector Level 6 */
+vector1F: .long _FAULT /* Autovector Level 7 */
+
+/* TRAP #0 - #15 */
+vector20_2F:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+/* Reserved */
+vector30_3F:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector64_127:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector128_191:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector192_255:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+ .text
+
+ .globl _start
+_start:
+ nop
+ nop
+ move.w #0x2700,%sr /* Mask off Interrupt */
+
+ /* Set vector base register at the beginning of the Flash */
+ move.l #CFG_FLASH_BASE, %d0
+ movec %d0, %VBR
+
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+ movec %d0, %RAMBAR1
+
+ /* initialize general use internal ram */
+ move.l #0, %d0
+ move.l #(ICACHE_STATUS), %a1 /* icache */
+ move.l #(DCACHE_STATUS), %a2 /* icache */
+ move.l #(CACR_STATUS), %a3 /* CACR */
+ move.l %d0, (%a1)
+ move.l %d0, (%a2)
+ move.l %d0, (%a3)
+
+ /* invalidate and disable cache */
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0, %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+
+ /* set stackpointer to end of internal ram to get some stackspace for
+ the first c-code */
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+ clr.l %sp@-
+
+ move.l #__got_start, %a5 /* put relocation table address to a5 */
+
+ bsr cpu_init_f /* run low-level CPU init code (from flash) */
+ bsr board_init_f /* run low-level board init code (from flash) */
+
+ /* board_init_f() does not return */
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ link.w %a6,#0
+ move.l 8(%a6), %sp /* set new stack pointer */
+
+ move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
+ move.l 16(%a6), %a0 /* Save copy of Destination Address */
+
+ move.l #CFG_MONITOR_BASE, %a1
+ move.l #__init_end, %a2
+ move.l %a0, %a3
+
+ /* copy the code to RAM */
+1:
+ move.l (%a1)+, (%a3)+
+ cmp.l %a1,%a2
+ bgt.s 1b
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ move.l %a0, %a1
+ add.l #(in_ram - CFG_MONITOR_BASE), %a1
+ jmp (%a1)
+
+in_ram:
+
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ move.l %a0, %a1
+ add.l #(_sbss - CFG_MONITOR_BASE),%a1
+ move.l %a0, %d1
+ add.l #(_ebss - CFG_MONITOR_BASE),%d1
+6:
+ clr.l (%a1)+
+ cmp.l %a1,%d1
+ bgt.s 6b
+
+ /*
+ * fix got table in RAM
+ */
+ move.l %a0, %a1
+ add.l #(__got_start - CFG_MONITOR_BASE),%a1
+ move.l %a1,%a5 /* * fix got pointer register a5 */
+
+ move.l %a0, %a2
+ add.l #(__got_end - CFG_MONITOR_BASE),%a2
+
+7:
+ move.l (%a1),%d1
+ sub.l #_start,%d1
+ add.l %a0,%d1
+ move.l %d1,(%a1)+
+ cmp.l %a2, %a1
+ bne 7b
+
+ /* calculate relative jump to board_init_r in ram */
+ move.l %a0, %a1
+ add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+
+ /* set parameters for board_init_r */
+ move.l %a0,-(%sp) /* dest_addr */
+ move.l %d0,-(%sp) /* gd */
+ jsr (%a1)
+
+/*------------------------------------------------------------------------------*/
+/* exception code */
+ .globl _fault
+_fault:
+ jmp _fault
+ .globl _exc_handler
+
+_exc_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr exc_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+ .globl _int_handler
+_int_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr int_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+/*------------------------------------------------------------------------------*/
+/* cache functions */
+ .globl icache_enable
+icache_enable:
+ move.l #0x01200000, %d0 /* Invalid cache */
+ movec %d0, %CACR
+
+ move.l #(CFG_SDRAM_BASE + 0x1c000), %d0
+ movec %d0, %ACR0
+
+ move.l #0x81600610, %d0 /* Enable cache */
+ movec %d0, %CACR
+
+ move.l #(ICACHE_STATUS), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl icache_disable
+icache_disable:
+ move.l #0x01F00000, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Invalidate icache */
+ clr.l %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+
+ move.l #(ICACHE_STATUS), %a1
+ moveq #0, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl icache_status
+icache_status:
+ move.l #(ICACHE_STATUS), %a1
+ move.l (%a1), %d0
+ rts
+
+ .globl icache_invalid
+icache_invalid:
+ move.l #0x80600610, %d0 /* Invalidate icache */
+ movec %d0, %CACR /* Enable and invalidate cache */
+ rts
+
+ .globl dcache_enable
+dcache_enable:
+ move.l #0x01200000, %d0 /* Invalid cache */
+ movec %d0, %CACR
+
+ move.l #0x81300610, %d0
+ movec %d0, %CACR
+
+ move.l #(DCACHE_STATUS), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl dcache_disable
+dcache_disable:
+ move.l #0x81600610, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Invalidate icache */
+
+ move.l #(DCACHE_STATUS), %a1
+ moveq #0, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl dcache_invalid
+dcache_invalid:
+ move.l #0x81100610, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable and invalidate cache */
+ rts
+
+ .globl dcache_status
+dcache_status:
+ move.l #(DCACHE_STATUS), %a1
+ move.l (%a1), %d0
+ rts
+
+/*------------------------------------------------------------------------------*/
+
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c
index 89cc8ad..61541ab 100644
--- a/cpu/mcf532x/cpu.c
+++ b/cpu/mcf532x/cpu.c
@@ -64,6 +64,18 @@
case 0x61:
id = 5327;
break;
+ case 0x65:
+ id = 5373;
+ break;
+ case 0x68:
+ id = 53721;
+ break;
+ case 0x69:
+ id = 5372;
+ break;
+ case 0x6B:
+ id = 5372;
+ break;
}
if (id) {
@@ -84,6 +96,7 @@
volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
wdp->sr = 0x5555; /* Count register */
+ wdp->sr = 0xAAAA; /* Count register */
}
int watchdog_disable(void)
@@ -104,8 +117,11 @@
/* set timeout and enable watchdog */
wdog_module = ((CFG_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT);
- wdog_module |= (wdog_module / 8192);
- wdp->mr = wdog_module;
+#ifdef CONFIG_M5329
+ wdp->mr = (wdog_module / 8192);
+#else
+ wdp->mr = (wdog_module / 4096);
+#endif
wdp->cr = WTM_WCR_EN;
puts("WATCHDOG:enabled\n");
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c
index 6622eee..585216d 100644
--- a/cpu/mcf5445x/cpu_init.c
+++ b/cpu/mcf5445x/cpu_init.c
@@ -113,7 +113,6 @@
#ifdef CONFIG_MCFTMR
volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE);
volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
- u32 oscillator = CFG_RTC_OSCILLATOR;
rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF;
rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF;
diff --git a/cpu/mcf5445x/pci.c b/cpu/mcf5445x/pci.c
index 8ace536..0398469 100644
--- a/cpu/mcf5445x/pci.c
+++ b/cpu/mcf5445x/pci.c
@@ -46,48 +46,18 @@
u16 cfg_type = 0; \
addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
out_be32(hose->cfg_addr, addr); \
- __asm__ __volatile__("nop"); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
out_be32(hose->cfg_addr, addr & 0x7fffffff); \
- __asm__ __volatile__("nop"); \
return 0; \
}
PCI_OP(read, byte, u8 *, in_8, 3)
PCI_OP(read, word, u16 *, in_le16, 2)
+PCI_OP(read, dword, u32 *, in_le32, 0)
PCI_OP(write, byte, u8, out_8, 3)
PCI_OP(write, word, u16, out_le16, 2)
PCI_OP(write, dword, u32, out_le32, 0)
-int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,
- int offset, u32 * val)
-{
- u32 addr;
- u32 tmpv;
- u32 mask = 2; /* word access */
- /* Read lower 16 bits */
- addr = ((offset & 0xfc) | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("nop");
- *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("nop");
-
- /* Read upper 16 bits */
- offset += 2;
- addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("nop");
- tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("nop");
-
- /* combine results into dword value */
- *val = (tmpv << 16) | *val;
-
- return 0;
-}
-
void pci_mcf5445x_init(struct pci_controller *hose)
{
volatile pci_t *pci = (volatile pci_t *)MMAP_PCI;
@@ -95,7 +65,7 @@
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
u32 barEn = 0;
- pciarb->acr = 0x001f001f;
+ pciarb->acr = 0x001F001F;
/* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
PCIREQ2, PCIGNT2 */
@@ -104,53 +74,58 @@
GPIO_PAR_PCI_GNT0 | GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 |
GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0;
+ /* Assert reset bit */
+ pci->gscr |= PCI_GSCR_PR;
+
pci->tcr1 |= PCI_TCR1_P;
/* Initiator windows */
- pci->iw0btar = CFG_PCI_MEM_PHYS;
- pci->iw1btar = CFG_PCI_IO_PHYS;
- pci->iw2btar = CFG_PCI_CFG_PHYS;
+ pci->iw0btar = CFG_PCI_MEM_PHYS | (CFG_PCI_MEM_PHYS >> 16);
+ pci->iw1btar = CFG_PCI_IO_PHYS | (CFG_PCI_IO_PHYS >> 16);
+ pci->iw2btar = CFG_PCI_CFG_PHYS | (CFG_PCI_CFG_PHYS >> 16);
pci->iwcr =
PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO;
+ pci->icr = 0;
+
/* Enable bus master and mem access */
- pci->scr = PCI_SCR_MW | PCI_SCR_B | PCI_SCR_M;
+ pci->scr = PCI_SCR_B | PCI_SCR_M;
/* Cache line size and master latency */
- pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xFF);
+ pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8);
pci->cr2 = 0;
#ifdef CFG_PCI_BAR0
pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0);
pci->tbatr0 = CFG_PCI_TBATR0 | PCI_TBATR_EN;
- barEn |= PCI_TCR1_B0E;
+ barEn |= PCI_TCR2_B0E;
#endif
#ifdef CFG_PCI_BAR1
pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1);
pci->tbatr1 = CFG_PCI_TBATR1 | PCI_TBATR_EN;
- barEn |= PCI_TCR1_B1E;
+ barEn |= PCI_TCR2_B1E;
#endif
#ifdef CFG_PCI_BAR2
pci->bar2 = PCI_BAR_BAR2(CFG_PCI_BAR2);
pci->tbatr2 = CFG_PCI_TBATR2 | PCI_TBATR_EN;
- barEn |= PCI_TCR1_B2E;
+ barEn |= PCI_TCR2_B2E;
#endif
#ifdef CFG_PCI_BAR3
pci->bar3 = PCI_BAR_BAR3(CFG_PCI_BAR3);
pci->tbatr3 = CFG_PCI_TBATR3 | PCI_TBATR_EN;
- barEn |= PCI_TCR1_B3E;
+ barEn |= PCI_TCR2_B3E;
#endif
#ifdef CFG_PCI_BAR4
pci->bar4 = PCI_BAR_BAR4(CFG_PCI_BAR4);
pci->tbatr4 = CFG_PCI_TBATR4 | PCI_TBATR_EN;
- barEn |= PCI_TCR1_B4E;
+ barEn |= PCI_TCR2_B4E;
#endif
#ifdef CFG_PCI_BAR5
pci->bar5 = PCI_BAR_BAR5(CFG_PCI_BAR5);
pci->tbatr5 = CFG_PCI_TBATR5 | PCI_TBATR_EN;
- barEn |= PCI_TCR1_B5E;
+ barEn |= PCI_TCR2_B5E;
#endif
pci->tcr2 = barEn;
diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S
index 423583d..d64c5af 100644
--- a/cpu/mcf5445x/start.S
+++ b/cpu/mcf5445x/start.S
@@ -279,14 +279,13 @@
move.l (%a1), %d1
move.l #0x00040100, %d0 /* Invalidate icache */
- or.l %d1, %d0
movec %d0, %CACR
- move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup icache */
+ move.l #(CFG_SDRAM_BASE + 0x1c000), %d0 /* Setup icache */
movec %d0, %ACR2
- or.l #0x00088400, %d1 /* Enable bcache and icache */
- movec %d1, %CACR
+ move.l #0x04088020, %d0 /* Enable bcache and icache */
+ movec %d0, %CACR
move.l #(ICACHE_STATUS), %a1
moveq #1, %d0
@@ -298,7 +297,7 @@
move.l #(CACR_STATUS), %a1 /* read CACR Status */
move.l (%a1), %d0
- and.l #0xFFF77BFF, %d0
+ move.l #0xFFF77BFF, %d0
or.l #0x00040100, %d0 /* Setup cache mask */
movec %d0, %CACR /* Invalidate icache */
clr.l %d0
@@ -321,7 +320,7 @@
move.l #(CACR_STATUS), %a1 /* read CACR Status */
move.l (%a1), %d0
- or.l #0x00040100, %d0 /* Invalidate icache */
+ move.l #0x00040100, %d0 /* Invalidate icache */
movec %d0, %CACR /* Enable and invalidate cache */
rts
@@ -330,17 +329,11 @@
move.l #(CACR_STATUS), %a1 /* read CACR Status */
move.l (%a1), %d1
- move.l #0x01000000, %d0
- or.l %d1, %d0
+ move.l #0x01040100, %d0
movec %d0, %CACR /* Invalidate dcache */
- move.l #(CFG_SDRAM_BASE + 0xc000), %d0
- movec %d0, %ACR0
- move.l #0, %d0
- movec %d0, %ACR1
-
- or.l #0x80000000, %d1 /* Enable bcache and icache */
- movec %d1, %CACR
+ move.l #0x80088020, %d0 /* Enable bcache and icache */
+ movec %d0, %CACR
move.l #(DCACHE_STATUS), %a1
moveq #1, %d0
@@ -369,7 +362,7 @@
move.l #(CACR_STATUS), %a1 /* read CACR Status */
move.l (%a1), %d0
- or.l #0x01000000, %d0 /* Setup cache mask */
+ move.l #0x81088020, %d0 /* Setup cache mask */
movec %d0, %CACR /* Enable and invalidate cache */
rts
diff --git a/cpu/mcf547x_8x/Makefile b/cpu/mcf547x_8x/Makefile
new file mode 100644
index 0000000..e12bef1
--- /dev/null
+++ b/cpu/mcf547x_8x/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# CFLAGS += -DET_DEBUG
+
+LIB = lib$(CPU).a
+
+START =
+COBJS = cpu.o speed.o cpu_init.o pci.o interrupts.o slicetimer.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/mcf547x_8x/config.mk b/cpu/mcf547x_8x/config.mk
new file mode 100644
index 0000000..e5f4385
--- /dev/null
+++ b/cpu/mcf547x_8x/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+ifeq ($(findstring 4.2,$(shell $(CC) --version)),4.2)
+PLATFORM_CPPFLAGS += -mcpu=5485 -fPIC
+else
+PLATFORM_CPPFLAGS += -m5407 -fPIC
+endif
diff --git a/cpu/mcf547x_8x/cpu.c b/cpu/mcf547x_8x/cpu.c
new file mode 100644
index 0000000..528bca6
--- /dev/null
+++ b/cpu/mcf547x_8x/cpu.c
@@ -0,0 +1,143 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ volatile gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
+
+ gptmr->pre = 10;
+ gptmr->cnt = 1;
+
+ /* enable watchdog, set timeout to 0 and wait */
+ gptmr->mode = GPT_TMS_SGPIO;
+ gptmr->ctrl = GPT_CTRL_WDEN | GPT_CTRL_CE;
+
+ /* we don't return! */
+ return 1;
+};
+
+int checkcpu(void)
+{
+ volatile siu_t *siu = (siu_t *) MMAP_SIU;
+ u16 id = 0;
+
+ puts("CPU: ");
+
+ switch ((siu->jtagid & 0x000FF000) >> 12) {
+ case 0x0C:
+ id = 5485;
+ break;
+ case 0x0D:
+ id = 5484;
+ break;
+ case 0x0E:
+ id = 5483;
+ break;
+ case 0x0F:
+ id = 5482;
+ break;
+ case 0x10:
+ id = 5481;
+ break;
+ case 0x11:
+ id = 5480;
+ break;
+ case 0x12:
+ id = 5475;
+ break;
+ case 0x13:
+ id = 5474;
+ break;
+ case 0x14:
+ id = 5473;
+ break;
+ case 0x15:
+ id = 5472;
+ break;
+ case 0x16:
+ id = 5471;
+ break;
+ case 0x17:
+ id = 5470;
+ break;
+ }
+
+ if (id) {
+ printf("Freescale MCF%d\n", id);
+ printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n",
+ (int)(gd->cpu_clk / 1000000),
+ (int)(gd->bus_clk / 1000000));
+ }
+
+ return 0;
+};
+
+#if defined(CONFIG_HW_WATCHDOG)
+/* Called by macro WATCHDOG_RESET */
+void hw_watchdog_reset(void)
+{
+ volatile gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
+
+ gptmr->ocpw = 0xa5;
+}
+
+int watchdog_disable(void)
+{
+ volatile gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
+
+ /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */
+ gptmr->mode = 0;
+ gptmr->ctrl = 0;
+
+ puts("WATCHDOG:disabled\n");
+
+ return (0);
+}
+
+int watchdog_init(void)
+{
+
+ volatile gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
+
+ gptmr->pre = CONFIG_WATCHDOG_TIMEOUT;
+ gptmr->cnt = CFG_TIMER_PRESCALER * 1000;
+
+ gptmr->mode = GPT_TMS_SGPIO;
+ gptmr->ctrl = GPT_CTRL_CE | GPT_CTRL_WDEN;
+ puts("WATCHDOG:enabled\n");
+
+ return (0);
+}
+#endif /* CONFIG_HW_WATCHDOG */
diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c
new file mode 100644
index 0000000..11154c6
--- /dev/null
+++ b/cpu/mcf547x_8x/cpu_init.c
@@ -0,0 +1,132 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <MCD_dma.h>
+#include <asm/immap.h>
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+ volatile xlbarb_t *xlbarb = (volatile xlbarb_t *) MMAP_XARB;
+
+ xlbarb->adrto = 0x2000;
+ xlbarb->datto = 0x2000;
+ xlbarb->busto = 0x3000;
+
+ xlbarb->cfg = XARB_SR_AT | XARB_SR_DT;
+
+ /* Master Priority Enable */
+ xlbarb->pri = 0;
+ xlbarb->prien = 0xff;
+
+#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
+ fbcs->csar0 = CFG_CS0_BASE;
+ fbcs->cscr0 = CFG_CS0_CTRL;
+ fbcs->csmr0 = CFG_CS0_MASK;
+#endif
+
+#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+ fbcs->csar1 = CFG_CS1_BASE;
+ fbcs->cscr1 = CFG_CS1_CTRL;
+ fbcs->csmr1 = CFG_CS1_MASK;
+#endif
+
+#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
+ fbcs->csar2 = CFG_CS2_BASE;
+ fbcs->cscr2 = CFG_CS2_CTRL;
+ fbcs->csmr2 = CFG_CS2_MASK;
+#endif
+
+#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
+ fbcs->csar3 = CFG_CS3_BASE;
+ fbcs->cscr3 = CFG_CS3_CTRL;
+ fbcs->csmr3 = CFG_CS3_MASK;
+#endif
+
+#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
+ fbcs->csar4 = CFG_CS4_BASE;
+ fbcs->cscr4 = CFG_CS4_CTRL;
+ fbcs->csmr4 = CFG_CS4_MASK;
+#endif
+
+#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
+ fbcs->csar5 = CFG_CS5_BASE;
+ fbcs->cscr5 = CFG_CS5_CTRL;
+ fbcs->csmr5 = CFG_CS5_MASK;
+#endif
+
+#ifdef CONFIG_FSL_I2C
+ gpio->par_feci2cirq = GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA;
+#endif
+
+ icache_enable();
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r(void)
+{
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC)
+ MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512),
+ MCD_RELOC_TASKS);
+#endif
+ return (0);
+}
+
+void uart_port_conf(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ volatile u8 *pscsicr = (u8 *) (CFG_UART_BASE + 0x40);
+
+ /* Setup Ports: */
+ switch (CFG_UART_PORT) {
+ case 0:
+ gpio->par_psc0 = (GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
+ break;
+ case 1:
+ gpio->par_psc1 = (GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1);
+ break;
+ case 2:
+ gpio->par_psc2 = (GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2);
+ break;
+ case 3:
+ gpio->par_psc3 = (GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3);
+ break;
+ }
+
+ *pscsicr &= 0xF8;
+}
diff --git a/cpu/mcf547x_8x/interrupts.c b/cpu/mcf547x_8x/interrupts.c
new file mode 100644
index 0000000..d684ffe
--- /dev/null
+++ b/cpu/mcf547x_8x/interrupts.c
@@ -0,0 +1,50 @@
+/*
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* CPU specific interrupt routine */
+#include <common.h>
+#include <asm/immap.h>
+
+int interrupt_init(void)
+{
+ volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+
+ /* Make sure all interrupts are disabled */
+ intp->imrh0 |= 0xFFFFFFFF;
+ intp->imrl0 |= 0xFFFFFFFF;
+
+ enable_interrupts();
+
+ return 0;
+}
+
+#if defined(CONFIG_SLTTMR)
+void dtimer_intr_setup(void)
+{
+ volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+
+ intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
+ intp->imrh0 &= ~CFG_TMRINTR_MASK;
+}
+#endif
diff --git a/cpu/mcf547x_8x/pci.c b/cpu/mcf547x_8x/pci.c
new file mode 100644
index 0000000..70378b0
--- /dev/null
+++ b/cpu/mcf547x_8x/pci.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI Configuration space access support
+ */
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/immap.h>
+
+#if defined(CONFIG_PCI)
+/* System RAM mapped over PCI */
+#define CFG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CFG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#define CFG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
+
+#define cfg_read(val, addr, type, op) *val = op((type)(addr));
+#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
+
+#define PCI_OP(rw, size, type, op, mask) \
+int pci_##rw##_cfg_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, type val) \
+{ \
+ u32 addr = 0; \
+ u16 cfg_type = 0; \
+ addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
+ out_be32(hose->cfg_addr, addr); \
+ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
+ __asm__ __volatile__("nop"); \
+ __asm__ __volatile__("nop"); \
+ out_be32(hose->cfg_addr, addr & 0x7fffffff); \
+ return 0; \
+}
+
+PCI_OP(read, byte, u8 *, in_8, 3)
+PCI_OP(read, word, u16 *, in_le16, 2)
+PCI_OP(write, byte, u8, out_8, 3)
+PCI_OP(write, word, u16, out_le16, 2)
+PCI_OP(write, dword, u32, out_le32, 0)
+
+int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,
+ int offset, u32 * val)
+{
+ u32 addr;
+ u32 tmpv;
+ u32 mask = 2; /* word access */
+ /* Read lower 16 bits */
+ addr = ((offset & 0xfc) | (dev) | 0x80000000);
+ out_be32(hose->cfg_addr, addr);
+ *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
+ __asm__ __volatile__("nop");
+ out_be32(hose->cfg_addr, addr & 0x7fffffff);
+
+ /* Read upper 16 bits */
+ offset += 2;
+ addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
+ out_be32(hose->cfg_addr, addr);
+ tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
+ __asm__ __volatile__("nop");
+ out_be32(hose->cfg_addr, addr & 0x7fffffff);
+
+ /* combine results into dword value */
+ *val = (tmpv << 16) | *val;
+
+ return 0;
+}
+
+void pci_mcf547x_8x_init(struct pci_controller *hose)
+{
+ volatile pci_t *pci = (volatile pci_t *) MMAP_PCI;
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ /* Port configuration */
+ gpio->par_pcibg =
+ GPIO_PAR_PCIBG_PCIBG0(3) | GPIO_PAR_PCIBG_PCIBG1(3) |
+ GPIO_PAR_PCIBG_PCIBG2(3) | GPIO_PAR_PCIBG_PCIBG3(3) |
+ GPIO_PAR_PCIBG_PCIBG4(3);
+ gpio->par_pcibr =
+ GPIO_PAR_PCIBR_PCIBR0(3) | GPIO_PAR_PCIBR_PCIBR1(3) |
+ GPIO_PAR_PCIBR_PCIBR2(3) | GPIO_PAR_PCIBR_PCIBR3(3) |
+ GPIO_PAR_PCIBR_PCIBR4(3);
+
+ /* Assert reset bit */
+ pci->gscr |= PCI_GSCR_PR;
+
+ pci->tcr1 = PCI_TCR1_P;
+
+ /* Initiator windows */
+ pci->iw0btar = CFG_PCI_MEM_PHYS | (CFG_PCI_MEM_PHYS >> 16);
+ pci->iw1btar = CFG_PCI_IO_PHYS | (CFG_PCI_IO_PHYS >> 16);
+ pci->iw2btar = CFG_PCI_CFG_PHYS | (CFG_PCI_CFG_PHYS >> 16);
+
+ pci->iwcr =
+ PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
+ PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO;
+
+ pci->icr = 0;
+
+ /* Enable bus master and mem access */
+ pci->scr = PCI_SCR_B | PCI_SCR_M;
+
+ /* Cache line size and master latency */
+ pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8);
+ pci->cr2 = 0;
+
+#ifdef CFG_PCI_BAR0
+ pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0);
+ pci->tbatr0a = CFG_PCI_TBATR0 | PCI_TBATR_EN;
+#endif
+#ifdef CFG_PCI_BAR1
+ pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1);
+ pci->tbatr1a = CFG_PCI_TBATR1 | PCI_TBATR_EN;
+#endif
+
+ /* Deassert reset bit */
+ pci->gscr &= ~PCI_GSCR_PR;
+ udelay(1000);
+
+ /* Enable PCI bus master support */
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ pci_set_region(hose->regions + 0, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS,
+ CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+
+ pci_set_region(hose->regions + 1, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS,
+ CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+ pci_set_region(hose->regions + 2, CFG_PCI_SYS_MEM_BUS,
+ CFG_PCI_SYS_MEM_PHYS, CFG_PCI_SYS_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose->region_count = 3;
+
+ hose->cfg_addr = &(pci->car);
+ hose->cfg_data = (volatile unsigned char *)CFG_PCI_CFG_BUS;
+
+ pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
+ pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
+ pci_write_cfg_dword);
+
+ /* Hose scan */
+ pci_register_hose(hose);
+ hose->last_busno = pci_hose_scan(hose);
+}
+#endif /* CONFIG_PCI */
diff --git a/cpu/mcf547x_8x/slicetimer.c b/cpu/mcf547x_8x/slicetimer.c
new file mode 100644
index 0000000..494f98f
--- /dev/null
+++ b/cpu/mcf547x_8x/slicetimer.c
@@ -0,0 +1,112 @@
+/*
+ * (C) Copyright 2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/timer.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static ulong timestamp;
+
+#if defined(CONFIG_SLTTMR)
+#ifndef CFG_UDELAY_BASE
+# error "uDelay base not defined!"
+#endif
+
+#if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK)
+# error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!"
+#endif
+extern void dtimer_intr_setup(void);
+
+void udelay(unsigned long usec)
+{
+ volatile slt_t *timerp = (slt_t *) (CFG_UDELAY_BASE);
+ u32 now, freq;
+
+ /* 1 us period */
+ freq = CFG_TIMER_PRESCALER;
+
+ timerp->cr = 0; /* Disable */
+ timerp->tcnt = usec * freq;
+ timerp->cr = SLT_CR_TEN;
+
+ now = timerp->cnt;
+ while (now != 0)
+ now = timerp->cnt;
+
+ timerp->sr |= SLT_SR_ST;
+ timerp->cr = 0;
+}
+
+void dtimer_interrupt(void *not_used)
+{
+ volatile slt_t *timerp = (slt_t *) (CFG_TMR_BASE);
+
+ /* check for timer interrupt asserted */
+ if ((CFG_TMRPND_REG & CFG_TMRINTR_MASK) == CFG_TMRINTR_PEND) {
+ timerp->sr |= SLT_SR_ST;
+ timestamp++;
+ return;
+ }
+}
+
+void timer_init(void)
+{
+ volatile slt_t *timerp = (slt_t *) (CFG_TMR_BASE);
+
+ timestamp = 0;
+
+ timerp->cr = 0; /* disable timer */
+ timerp->tcnt = 0;
+ timerp->sr = SLT_SR_BE | SLT_SR_ST; /* clear status */
+
+ /* initialize and enable timer interrupt */
+ irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0);
+
+ /* Interrupt every ms */
+ timerp->tcnt = 1000 * CFG_TIMER_PRESCALER;
+
+ dtimer_intr_setup();
+
+ /* set a period of 1us, set timer mode to restart and
+ enable timer and interrupt */
+ timerp->cr = SLT_CR_RUN | SLT_CR_IEN | SLT_CR_TEN;
+}
+
+void reset_timer(void)
+{
+ timestamp = 0;
+}
+
+ulong get_timer(ulong base)
+{
+ return (timestamp - base);
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t;
+}
+#endif /* CONFIG_SLTTMR */
diff --git a/cpu/mcf547x_8x/speed.c b/cpu/mcf547x_8x/speed.c
new file mode 100644
index 0000000..389e7c9
--- /dev/null
+++ b/cpu/mcf547x_8x/speed.c
@@ -0,0 +1,43 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include <asm/immap.h>
+
+/*
+ * get_clocks() fills in gd->cpu_clock and gd->bus_clk
+ */
+int get_clocks(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bus_clk = CFG_CLK;
+ gd->cpu_clk = (gd->bus_clk * 2);
+ return (0);
+}
diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S
new file mode 100644
index 0000000..442665f
--- /dev/null
+++ b/cpu/mcf547x_8x/start.S
@@ -0,0 +1,361 @@
+/*
+ * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include "version.h"
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* last three long word reserved for cache status */
+#define ICACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4)
+#define DCACHE_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8)
+#define CACR_STATUS (CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12)
+
+#define _START _start
+#define _FAULT _fault
+
+#define SAVE_ALL \
+ move.w #0x2700,%sr; /* disable intrs */ \
+ subl #60,%sp; /* space for 15 regs */ \
+ moveml %d0-%d7/%a0-%a6,%sp@;
+
+#define RESTORE_ALL \
+ moveml %sp@,%d0-%d7/%a0-%a6; \
+ addl #60,%sp; /* space for 15 regs */ \
+ rte;
+
+.text
+/*
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
+ */
+_vectors:
+
+INITSP: .long 0x00000000 /* Initial SP */
+INITPC: .long _START /* Initial PC */
+vector02: .long _FAULT /* Access Error */
+vector03: .long _FAULT /* Address Error */
+vector04: .long _FAULT /* Illegal Instruction */
+vector05: .long _FAULT /* Reserved */
+vector06: .long _FAULT /* Reserved */
+vector07: .long _FAULT /* Reserved */
+vector08: .long _FAULT /* Privilege Violation */
+vector09: .long _FAULT /* Trace */
+vector0A: .long _FAULT /* Unimplemented A-Line */
+vector0B: .long _FAULT /* Unimplemented F-Line */
+vector0C: .long _FAULT /* Debug Interrupt */
+vector0D: .long _FAULT /* Reserved */
+vector0E: .long _FAULT /* Format Error */
+vector0F: .long _FAULT /* Unitialized Int. */
+
+/* Reserved */
+vector10_17:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector18: .long _FAULT /* Spurious Interrupt */
+vector19: .long _FAULT /* Autovector Level 1 */
+vector1A: .long _FAULT /* Autovector Level 2 */
+vector1B: .long _FAULT /* Autovector Level 3 */
+vector1C: .long _FAULT /* Autovector Level 4 */
+vector1D: .long _FAULT /* Autovector Level 5 */
+vector1E: .long _FAULT /* Autovector Level 6 */
+vector1F: .long _FAULT /* Autovector Level 7 */
+
+/* TRAP #0 - #15 */
+vector20_2F:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+/* Reserved */
+vector30_3F:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector64_127:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector128_191:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector192_255:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+ .text
+
+ .globl _start
+_start:
+ nop
+ nop
+ move.w #0x2700,%sr /* Mask off Interrupt */
+
+ /* Set vector base register at the beginning of the Flash */
+ move.l #CFG_FLASH_BASE, %d0
+ movec %d0, %VBR
+
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+ movec %d0, %RAMBAR0
+
+ move.l #(CFG_INIT_RAM1_ADDR + CFG_INIT_RAM1_CTRL), %d0
+ movec %d0, %RAMBAR1
+
+ move.l #CFG_MBAR, %d0 /* set MBAR address */
+ move.c %d0, %MBAR
+
+ /* invalidate and disable cache */
+ move.l #0x01040100, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0, %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+ movec %d0, %ACR2
+ movec %d0, %ACR3
+
+ /* initialize general use internal ram */
+ move.l #0, %d0
+ move.l #(ICACHE_STATUS), %a1 /* icache */
+ move.l #(DCACHE_STATUS), %a2 /* icache */
+ move.l #(CACR_STATUS), %a3 /* CACR */
+ move.l %d0, (%a1)
+ move.l %d0, (%a2)
+ move.l %d0, (%a3)
+
+ /* set stackpointer to end of internal ram to get some stackspace for the
+ first c-code */
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+ clr.l %sp@-
+
+ move.l #__got_start, %a5 /* put relocation table address to a5 */
+
+ bsr cpu_init_f /* run low-level CPU init code (from flash) */
+ bsr board_init_f /* run low-level board init code (from flash) */
+
+ /* board_init_f() does not return */
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ link.w %a6,#0
+ move.l 8(%a6), %sp /* set new stack pointer */
+
+ move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
+ move.l 16(%a6), %a0 /* Save copy of Destination Address */
+
+ move.l #CFG_MONITOR_BASE, %a1
+ move.l #__init_end, %a2
+ move.l %a0, %a3
+
+ /* copy the code to RAM */
+1:
+ move.l (%a1)+, (%a3)+
+ cmp.l %a1,%a2
+ bgt.s 1b
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ move.l %a0, %a1
+ add.l #(in_ram - CFG_MONITOR_BASE), %a1
+ jmp (%a1)
+
+in_ram:
+
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ move.l %a0, %a1
+ add.l #(_sbss - CFG_MONITOR_BASE),%a1
+ move.l %a0, %d1
+ add.l #(_ebss - CFG_MONITOR_BASE),%d1
+6:
+ clr.l (%a1)+
+ cmp.l %a1,%d1
+ bgt.s 6b
+
+ /*
+ * fix got table in RAM
+ */
+ move.l %a0, %a1
+ add.l #(__got_start - CFG_MONITOR_BASE),%a1
+ move.l %a1,%a5 /* * fix got pointer register a5 */
+
+ move.l %a0, %a2
+ add.l #(__got_end - CFG_MONITOR_BASE),%a2
+
+7:
+ move.l (%a1),%d1
+ sub.l #_start,%d1
+ add.l %a0,%d1
+ move.l %d1,(%a1)+
+ cmp.l %a2, %a1
+ bne 7b
+
+ /* calculate relative jump to board_init_r in ram */
+ move.l %a0, %a1
+ add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+
+ /* set parameters for board_init_r */
+ move.l %a0,-(%sp) /* dest_addr */
+ move.l %d0,-(%sp) /* gd */
+ jsr (%a1)
+
+/*------------------------------------------------------------------------------*/
+/* exception code */
+ .globl _fault
+_fault:
+ jmp _fault
+ .globl _exc_handler
+
+_exc_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr exc_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+ .globl _int_handler
+_int_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr int_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+/*------------------------------------------------------------------------------*/
+/* cache functions */
+ .globl icache_enable
+icache_enable:
+ move.l #(CFG_SDRAM_BASE + 0x1c000), %d0
+ movec %d0, %ACR2 /* Enable cache */
+
+ move.l #0x020C8100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ nop
+
+ move.l #(ICACHE_STATUS), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl icache_disable
+icache_disable:
+ move.l #0x000C8100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Disable cache */
+ clr.l %d0 /* Setup cache mask */
+ movec %d0, %ACR2
+ movec %d0, %ACR3
+
+ move.l #(ICACHE_STATUS), %a1
+ moveq #0, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl icache_invalid
+icache_invalid:
+ move.l #0x000C8100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ rts
+
+ .globl icache_status
+icache_status:
+ move.l #(ICACHE_STATUS), %a1
+ move.l (%a1), %d0
+ rts
+
+ .globl dcache_enable
+dcache_enable:
+ bsr icache_disable
+
+ move.l #(CFG_SDRAM_BASE + 0xc000), %d0
+ movec %d0, %ACR0 /* Enable cache */
+
+ move.l #0xA30C8100, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+
+ move.l #(DCACHE_STATUS), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl dcache_disable
+dcache_disable:
+ move.l #0xA30C8100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Disable cache */
+ clr.l %d0 /* Setup cache mask */
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+
+ move.l #(DCACHE_STATUS), %a1
+ moveq #0, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl dcache_status
+dcache_status:
+ move.l #(DCACHE_STATUS), %a1
+ move.l (%a1), %d0
+ rts
+
+/*------------------------------------------------------------------------------*/
+
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 2b92be0..e643037 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -73,59 +73,88 @@
(CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
#endif
+#ifdef CFG_ACR_RPTCNT
+ /* Arbiter repeat count */
+ im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
+ (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSECEP
+ /* all eTSEC's Emergency priority */
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) |
+ (CFG_SPCR_TSECEP << SPCR_TSECEP_SHIFT);
+#endif
+
#ifdef CFG_SPCR_TSEC1EP
/* TSEC1 Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (CFG_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT);
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) |
+ (CFG_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT);
#endif
#ifdef CFG_SPCR_TSEC2EP
/* TSEC2 Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) |
+ (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_ENCCM
+ /* Encryption clock mode */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) |
+ (CFG_SCCR_ENCCM << SCCR_PCICM_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_PCICM
+ /* PCI & DMA clock mode */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_PCICM) |
+ (CFG_SCCR_PCICM << SCCR_PCICM_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSECCM
+ /* all TSEC's clock mode */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSECCM) |
+ (CFG_SCCR_TSECCM << SCCR_TSECCM_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC1CM
/* TSEC1 clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) |
+ (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC2CM
- /* TSEC2 & I2C1 clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
+ /* TSEC2 clock mode */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) |
+ (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC1ON
/* TSEC1 clock switch */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) | (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) |
+ (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
#endif
#ifdef CFG_SCCR_TSEC2ON
/* TSEC2 clock switch */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) | (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) |
+ (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
#endif
#ifdef CFG_SCCR_USBMPHCM
/* USB MPH clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) | (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
-#endif
-
-#ifdef CFG_SCCR_PCICM
- /* PCI & DMA clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_PCICM) | (CFG_SCCR_PCICM << SCCR_PCICM_SHIFT);
+ im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) |
+ (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
#endif
#ifdef CFG_SCCR_USBDRCM
/* USB DR clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_USBDRCM) | (CFG_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT);
+ im->clk.sccr = (im->clk.sccr & ~SCCR_USBDRCM) |
+ (CFG_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT);
#endif
-#ifdef CFG_SCCR_ENCCM
- /* Encryption clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) | (CFG_SCCR_ENCCM << SCCR_PCICM_SHIFT);
-#endif
-
-#ifdef CFG_ACR_RPTCNT
- /* Arbiter repeat count */
- im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT));
+#ifdef CFG_SCCR_SATACM
+ /* SATA controller clock mode */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_SATACM) |
+ (CFG_SCCR_SATACM << SCCR_SATACM_SHIFT);
#endif
/* RSR - Reset Status Register - clear all status (4.6.1.3) */
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 4f5a866..f598699 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -381,7 +381,7 @@
sata_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_SATA1CM value */
+ /* unkown SCCR_SATACM value */
return -11;
}
#endif
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index d179d70..2205dca 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -30,7 +30,7 @@
START = start.o resetvec.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tlb.o \
pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o \
$(COBJS-y)
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index fdb9ecb..c0ff1d5 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -31,6 +31,8 @@
#include <asm/processor.h>
#include <ioports.h>
#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -122,6 +124,34 @@
}
#endif
+/* We run cpu_init_early_f in AS = 1 */
+void cpu_init_early_f(void)
+{
+ set_tlb(0, CFG_CCSRBAR, CFG_CCSRBAR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 1, 0, BOOKE_PAGESZ_4K, 0);
+
+ /* set up CCSR if we want it moved */
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ {
+ u32 temp;
+
+ set_tlb(0, CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_DEFAULT,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 1, 1, BOOKE_PAGESZ_4K, 0);
+
+ temp = in_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT);
+ out_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR >> 12);
+
+ temp = in_be32((volatile u32 *)CFG_CCSRBAR);
+ }
+#endif
+
+ init_laws();
+ invalidate_tlb(0);
+ init_tlbs();
+}
+
/*
* Breathe some life into the CPU...
*
@@ -134,13 +164,15 @@
volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
extern void m8560_cpm_reset (void);
+ disable_tlb(14);
+ disable_tlb(15);
+
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
-
#ifdef CONFIG_CPM2
config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
#endif
@@ -222,11 +254,15 @@
int cpu_init_r(void)
{
#ifdef CONFIG_CLEAR_LAW0
+#ifdef CONFIG_FSL_LAW
+ disable_law(0);
+#else
volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
/* clear alternate boot location LAW (used for sdram, or ddr bank) */
ecm->lawar0 = 0;
#endif
+#endif
#if defined(CONFIG_L2_CACHE)
volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index adc9c4d..abc63c4 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -27,6 +27,7 @@
#include <i2c.h>
#include <spd.h>
#include <asm/mmu.h>
+#include <asm/fsl_law.h>
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
@@ -1022,7 +1023,6 @@
static unsigned int
setup_laws_and_tlbs(unsigned int memsize)
{
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
unsigned int tlb_size;
unsigned int law_size;
unsigned int ram_tlb_index;
@@ -1071,19 +1071,9 @@
ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE;
while (ram_tlb_address < (memsize * 1024 * 1024)
&& ram_tlb_index < 16) {
- mtspr(MAS0, FSL_BOOKE_MAS0(1, ram_tlb_index, 0));
- mtspr(MAS1, FSL_BOOKE_MAS1(1, 1, 0, 0, tlb_size));
- mtspr(MAS2, FSL_BOOKE_MAS2(ram_tlb_address, 0));
- mtspr(MAS3, FSL_BOOKE_MAS3(ram_tlb_address, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR)));
- asm volatile("isync;msync;tlbwe;isync");
-
- debug("DDR: MAS0=0x%08x\n", FSL_BOOKE_MAS0(1, ram_tlb_index, 0));
- debug("DDR: MAS1=0x%08x\n", FSL_BOOKE_MAS1(1, 1, 0, 0, tlb_size));
- debug("DDR: MAS2=0x%08x\n", FSL_BOOKE_MAS2(ram_tlb_address, 0));
- debug("DDR: MAS3=0x%08x\n",
- FSL_BOOKE_MAS3(ram_tlb_address, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR)));
+ set_tlb(1, ram_tlb_address, ram_tlb_address,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, ram_tlb_index, tlb_size, 1);
ram_tlb_address += (0x1000 << ((tlb_size - 1) * 2));
ram_tlb_index++;
@@ -1098,12 +1088,10 @@
/*
* Set up LAWBAR for all of DDR.
*/
- ecm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
- ecm->lawar1 = (LAWAR_EN
- | LAWAR_TRGT_IF_DDR
- | (LAWAR_SIZE & law_size));
- debug("DDR: LAWBAR1=0x%08x\n", ecm->lawbar1);
- debug("DDR: LARAR1=0x%08x\n", ecm->lawar1);
+
+#ifdef CONFIG_FSL_LAW
+ set_law(1, CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR);
+#endif
/*
* Confirm that the requested amount of memory was mapped.
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index b489d2f..e8e5eb2 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -143,84 +143,8 @@
li r1,0x0f00
mtspr IVOR15,r1 /* 15: Debug */
-
- /*
- * After reset, CCSRBAR is located at CFG_CCSRBAR_DEFAULT, i.e.
- * 0xff700000-0xff800000. We need add a TLB1 entry for this 1MB
- * region before we can access any CCSR registers such as L2
- * registers, Local Access Registers,etc. We will also re-allocate
- * CFG_CCSRBAR_DEFAULT to CFG_CCSRBAR immediately after TLB1 setup.
- *
- * Please refer to board-specif directory for TLB1 entry configuration.
- * (e.g. board/<yourboard>/init.S)
- *
- */
- bl tlb1_entry
- mr r5,r0
- lwzu r4,0(r5) /* how many TLB1 entries we actually use */
- mtctr r4
-
-0: lwzu r6,4(r5)
- lwzu r7,4(r5)
- lwzu r8,4(r5)
- lwzu r9,4(r5)
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
- isync
- bdnz 0b
-
-1:
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /* Special sequence needed to update CCSRBAR itself */
- lis r4,CFG_CCSRBAR_DEFAULT@h
- ori r4,r4,CFG_CCSRBAR_DEFAULT@l
-
- lis r5,CFG_CCSRBAR@h
- ori r5,r5,CFG_CCSRBAR@l
- srwi r6,r5,12
- stw r6,0(r4)
- isync
-
- lis r5,0xffff
- ori r5,r5,0xf000
- lwz r5,0(r5)
- isync
-
- lis r3,CFG_CCSRBAR@h
- lwz r5,CFG_CCSRBAR@l(r3)
- isync
-#endif
-
-
- /* set up local access windows, defined at board/<boardname>/init.S */
- lis r7,CFG_CCSRBAR@h
- ori r7,r7,CFG_CCSRBAR@l
-
- bl law_entry
- mr r6,r0
- lwzu r5,0(r6) /* how many windows we actually use */
- mtctr r5
-
- li r2,0x0c28 /* the first pair is reserved for */
- li r1,0x0c30 /* boot-over-rio-or-pci */
-
-0: lwzu r4,4(r6)
- lwzu r3,4(r6)
- stwx r4,r7,r2
- stwx r3,r7,r1
- addi r2,r2,0x0020
- addi r1,r1,0x0020
- bdnz 0b
-
/* Clear and set up some registers. */
- li r0,0
- mtmsr r0
- li r0,0x0000
+ li r0,0x0000
lis r1,0xffff
mtspr DEC,r0 /* prevent dec exceptions */
mttbl r0 /* prevent fit & wdt exceptions */
@@ -230,18 +154,13 @@
mtspr ESR,r0 /* clear exception syndrome register */
mtspr MCSR,r0 /* machine check syndrome register */
mtxer r0 /* clear integer exception register */
- lis r1,0x0002 /* set CE bit (Critical Exceptions) */
- ori r1,r1,0x1200 /* set ME/DE bit */
- mtmsr r1 /* change MSR */
- isync
/* Enable Time Base and Select Time Base Clock */
lis r0,HID0_EMCP@h /* Enable machine check */
#if defined(CONFIG_ENABLE_36BIT_PHYS)
- ori r0,r0,(HID0_TBEN|HID0_ENMAS7)@l /* Enable Timebase & MAS7 */
-#else
- ori r0,r0,HID0_TBEN@l /* enable Timebase */
+ ori r0,r0,HID0_ENMAS7@l /* Enable MAS7 */
#endif
+ ori r0,r0,HID0_TBEN@l /* Enable Timebase */
mtspr HID0,r0
li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
@@ -262,6 +181,58 @@
mtspr DBCR0,r0
#endif
+ /* create a temp mapping in AS=1 to the boot window */
+ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+ lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ /* create a temp mapping in AS=1 to the stack */
+ lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
+ ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
+
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
+
+ lis r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@h
+ ori r8,r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@l
+
+ lis r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+
+ mtspr MAS0,r6
+ mtspr MAS1,r7
+ mtspr MAS2,r8
+ mtspr MAS3,r9
+ isync
+ msync
+ tlbwe
+
+ lis r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@h
+ ori r6,r6,MSR_CE|MSR_ME|MSR_DE|MSR_IS|MSR_DS@l
+ lis r7,switch_as@h
+ ori r7,r7,switch_as@l
+
+ mtspr SPRN_SRR0,r7
+ mtspr SPRN_SRR1,r6
+ rfi
+
+switch_as:
/* L1 DCache is used for initial RAM */
/* Allocate Initial RAM in data cache.
@@ -321,6 +292,14 @@
stw r0,+12(r1) /* Save return addr (underflow vect) */
GET_GOT
+ bl cpu_init_early_f
+
+ /* switch back to AS = 0 */
+ lis r3,(MSR_CE|MSR_ME|MSR_DE)@h
+ ori r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l
+ mtmsr r3
+ isync
+
bl cpu_init_f
bl board_init_f
isync
diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c
new file mode 100644
index 0000000..b2c799a
--- /dev/null
+++ b/cpu/mpc85xx/tlb.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+
+void set_tlb(u8 tlb, u32 epn, u64 rpn,
+ u8 perms, u8 wimge,
+ u8 ts, u8 esel, u8 tsize, u8 iprot)
+{
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+
+ _mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
+ _mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
+ _mas2 = FSL_BOOKE_MAS2(epn, wimge);
+ _mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
+ _mas7 = rpn >> 32;
+
+ mtspr(MAS0, _mas0);
+ mtspr(MAS1, _mas1);
+ mtspr(MAS2, _mas2);
+ mtspr(MAS3, _mas3);
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr(MAS7, _mas7);
+#endif
+ asm volatile("isync;msync;tlbwe;isync");
+}
+
+void disable_tlb(u8 esel)
+{
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+
+ _mas0 = FSL_BOOKE_MAS0(1, esel, 0);
+ _mas1 = 0;
+ _mas2 = 0;
+ _mas3 = 0;
+ _mas7 = 0;
+
+ mtspr(MAS0, _mas0);
+ mtspr(MAS1, _mas1);
+ mtspr(MAS2, _mas2);
+ mtspr(MAS3, _mas3);
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr(MAS7, _mas7);
+#endif
+ asm volatile("isync;msync;tlbwe;isync");
+}
+
+void invalidate_tlb(u8 tlb)
+{
+ if (tlb == 0)
+ mtspr(MMUCSR0, 0x4);
+ if (tlb == 1)
+ mtspr(MMUCSR0, 0x2);
+}
+
+void init_tlbs(void)
+{
+ int i;
+
+ for (i = 0; i < num_tlb_entries; i++) {
+ set_tlb(tlb_table[i].tlb, tlb_table[i].epn, tlb_table[i].rpn,
+ tlb_table[i].perms, tlb_table[i].wimge,
+ tlb_table[i].ts, tlb_table[i].esel, tlb_table[i].tsize,
+ tlb_table[i].iprot);
+ }
+
+ return ;
+}
+
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 3ac2cdc..3bafea3 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -387,9 +387,9 @@
unsigned char spd1[MAX_SPD_BYTES];
unsigned char *dimm_spd[MAXDIMMS];
unsigned long dimm_populated[MAXDIMMS];
- unsigned long num_dimm_banks; /* on board dimm banks */
+ unsigned long num_dimm_banks; /* on board dimm banks */
unsigned long val;
- ddr_cas_id_t selected_cas;
+ ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
int write_recovery;
unsigned long dram_size = 0;
diff --git a/doc/README.m52277evb b/doc/README.m52277evb
new file mode 100644
index 0000000..de1daba
--- /dev/null
+++ b/doc/README.m52277evb
@@ -0,0 +1,237 @@
+Freescale MCF52277EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created Jan 8, 2008
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m52277evb/m52277evb.c Dram setup
+- board/freescale/m52277evb/Makefile Makefile
+- board/freescale/m52277evb/config.mk config make
+- board/freescale/m52277evb/u-boot.lds Linker description
+
+- cpu/mcf5227x/cpu.c cpu specific code
+- cpu/mcf5227x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
+- cpu/mcf5227x/interrupts.c cpu specific interrupt support
+- cpu/mcf5227x/speed.c system, flexbus, and cpu clock
+- cpu/mcf5227x/Makefile Makefile
+- cpu/mcf5227x/config.mk config make
+- cpu/mcf5227x/start.S start up assembly code
+
+- doc/README.m52277evb This readme file
+
+- drivers/serial/mcfuart.c ColdFire common UART driver
+- drivers/rtc/mcfrtc.c Realtime clock Driver
+
+- include/asm-m68k/bitops.h Bit operation function export
+- include/asm-m68k/byteorder.h Byte order functions
+- include/asm-m68k/crossbar.h CrossBar structure and definition
+- include/asm-m68k/dspi.h DSPI structure and definition
+- include/asm-m68k/edma.h eDMA structure and definition
+- include/asm-m68k/flexbus.h FlexBus structure and definition
+- include/asm-m68k/fsl_i2c.h I2C structure and definition
+- include/asm-m68k/global_data.h Global data structure
+- include/asm-m68k/immap.h ColdFire specific header file and driver macros
+- include/asm-m68k/immap_5227x.h mcf5227x specific header file
+- include/asm-m68k/io.h io functions
+- include/asm-m68k/lcd.h LCD structure and definition
+- include/asm-m68k/m5227x.h mcf5227x specific header file
+- include/asm-m68k/posix_types.h Posix
+- include/asm-m68k/processor.h header file
+- include/asm-m68k/ptrace.h Exception structure
+- include/asm-m68k/rtc.h Realtime clock header file
+- include/asm-m68k/ssi.h SSI structure and definition
+- include/asm-m68k/string.h String function export
+- include/asm-m68k/timer.h Timer structure and definition
+- include/asm-m68k/types.h Data types definition
+- include/asm-m68k/uart.h Uart structure and definition
+- include/asm-m68k/u-boot.h u-boot structure
+
+- include/configs/M52277EVB.h Board specific configuration file
+
+- lib_m68k/board.c board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/time.c Timer functions (Dma timer and PIT)
+- lib_m68k/traps.c Exception init code
+
+1 MCF52277 specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in this coldfire family
+
+1.2 Configuration settings for M52277EVB Development Board
+CONFIG_MCF5227x -- define for all MCF5227x CPUs
+CONFIG_M52277 -- define for all Freescale MCF52277 CPUs
+CONFIG_M52277EVB -- define for M52277EVB board
+
+CONFIG_MCFUART -- define to use common CF Uart driver
+CFG_UART_PORT -- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE -- define UART baudrate
+
+CONFIG_MCFRTC -- define to use common CF RTC driver
+CFG_MCFRTC_BASE -- provide base address for RTC in immap.h
+CFG_RTC_OSCILLATOR -- define RTC clock frequency
+RTC_DEBUG -- define to show RTC debug message
+CONFIG_CMD_DATE -- enable to use date feature in u-boot
+
+CONFIG_MCFTMR -- define to use DMA timer
+CONFIG_MCFPIT -- define to use PIT timer
+
+CONFIG_FSL_I2C -- define to use FSL common I2C driver
+CONFIG_HARD_I2C -- define for I2C hardware support
+CONFIG_SOFT_I2C -- define for I2C bit-banged
+CFG_I2C_SPEED -- define for I2C speed
+CFG_I2C_SLAVE -- define for I2C slave address
+CFG_I2C_OFFSET -- define for I2C base address offset
+CFG_IMMR -- define for MBAR offset
+
+CFG_MBAR -- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CFG_INIT_RAM_ADDR -- defines the base address of the MCF52277 internal SRAM
+
+CFG_CSn_BASE -- defines the Chip Select Base register
+CFG_CSn_MASK -- defines the Chip Select Mask register
+CFG_CSn_CTRL -- defines the Chip Select Control register
+
+CFG_SDRAM_BASE -- defines the DRAM Base
+
+CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
+update will be provided at later time
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+ Flash: 0x00000000-0x3FFFFFFF (1024MB)
+ DDR: 0x40000000-0x7FFFFFFF (1024MB)
+ SRAM: 0x80000000-0x8FFFFFFF (256MB)
+ IP: 0xF0000000-0xFFFFFFFF (256MB)
+
+2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+ linux kernel, you can customize it based on your system requirements:
+ Flash0: 0x00000000-0x00FFFFFF (16MB)
+
+ DDR: 0x40000000-0x4FFFFFFF (64MB)
+ SRAM: 0x80000000-0x80007FFF (32KB)
+ IP: 0xFC000000-0xFC0FFFFF (64KB)
+
+3. COMPILATION
+==============
+3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
+uClinux version) from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+ export CROSS_COMPILE=cross-compile-prefix
+ cd u-boot-1.x.x
+ make distclean
+ make M52277EVB_config
+ make
+
+4. SCREEN DUMP
+==============
+4.1 M52277EVB Development board
+ (NOTE: May not show exactly the same)
+
+U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
+
+CPU: Freescale MCF52277 (Mask:6c Version:0)
+ CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
+ INP CLK 16 Mhz VCO CLK 480 Mhz
+Board: Freescale 52277 EVB
+I2C: ready
+DRAM: 64 MB
+FLASH: 16 MB
+In: serial
+Out: serial
+Err: serial
+-> print
+baudrate=115200
+hostname=M52277EVB
+inpclk=16000000
+loadaddr=(0x40000000 + 0x10000)
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
+u-boot=u-boot.bin
+stdin=serial
+stdout=serial
+stderr=serial
+mem=65024k
+
+Environment size: 280/32764 bytes
+-> bdinfo
+memstart = 0x40000000
+memsize = 0x04000000
+flashstart = 0x00000000
+flashsize = 0x01000000
+flashoffset = 0x00000000
+sramstart = 0x80000000
+sramsize = 0x00008000
+mbar = 0xFC000000
+busfreq = 80 MHz
+flbfreq = 80 Mhz
+inpfreq = 16 Mhz
+vcofreq = 480 Mhz
+
+baudrate = 115200 bps
+->
+-> help
+? - alias for 'help'
+autoscr - run script from memory
+base - print or set address offset
+bdinfo - print Board Info structure
+boot - boot default, i.e., run 'bootcmd'
+bootd - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm - boot application image from memory
+bootp - boot image via network using BootP/TFTP protocol
+bootvx - Boot vxWorks from an ELF image
+cmp - memory compare
+coninfo - print console devices and information
+cp - memory copy
+crc32 - checksum calculation
+date - get/set/reset date & time
+dcache - enable or disable data cache
+echo - echo args to console
+erase - erase FLASH memory
+flinfo - print FLASH memory information
+go - start application at address 'addr'
+help - print online help
+icache - enable or disable instruction cache
+icrc32 - checksum calculation
+iloop - infinite loop on address range
+imd - i2c memory display
+iminfo - print header information for application image
+imls - list all images found in flash
+imm - i2c memory modify (auto-incrementing)
+imw - memory write (fill)
+inm - memory modify (constant address)
+iprobe - probe to discover valid I2C chip addresses
+itest - return true/false on integer compare
+loadb - load binary file over serial line (kermit mode)
+loads - load S-Record file over serial line
+loady - load binary file over serial line (ymodem mode)
+loop - infinite loop on address range
+ls - list files in a directory (default /)
+md - memory display
+mm - memory modify (auto-incrementing)
+mtest - simple RAM test
+mw - memory write (fill)
+nm - memory modify (constant address)
+ping - send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+reset - Perform RESET of the CPU
+run - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv - set environment variables
+sleep - delay execution for some time
+version - print monitor version
+->
diff --git a/doc/README.m5373evb b/doc/README.m5373evb
new file mode 100644
index 0000000..4f33b7d
--- /dev/null
+++ b/doc/README.m5373evb
@@ -0,0 +1,333 @@
+Freescale MCF5373EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created 11/08/07
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m5373evb/m5373evb.c Dram setup
+- board/freescale/m5373evb/mii.c Mii access
+- board/freescale/m5373evb/Makefile Makefile
+- board/freescale/m5373evb/config.mk config make
+- board/freescale/m5373evb/u-boot.lds Linker description
+
+- cpu/mcf532x/cpu.c cpu specific code
+- cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
+- cpu/mcf532x/interrupts.c cpu specific interrupt support
+- cpu/mcf532x/speed.c system, pci, flexbus, and cpu clock
+- cpu/mcf532x/Makefile Makefile
+- cpu/mcf532x/config.mk config make
+- cpu/mcf532x/start.S start up assembly code
+
+- doc/README.m5373evb This readme file
+
+- drivers/net/mcffec.c ColdFire common FEC driver
+- drivers/serial/mcfuart.c ColdFire common UART driver
+- drivers/rtc/mcfrtc.c Realtime clock Driver
+
+- include/asm-m68k/bitops.h Bit operation function export
+- include/asm-m68k/byteorder.h Byte order functions
+- include/asm-m68k/fec.h FEC structure and definition
+- include/asm-m68k/fsl_i2c.h I2C structure and definition
+- include/asm-m68k/global_data.h Global data structure
+- include/asm-m68k/immap.h ColdFire specific header file and driver macros
+- include/asm-m68k/immap_532x.h mcf532x specific header file
+- include/asm-m68k/io.h io functions
+- include/asm-m68k/m532x.h mcf532x specific header file
+- include/asm-m68k/posix_types.h Posix
+- include/asm-m68k/processor.h header file
+- include/asm-m68k/ptrace.h Exception structure
+- include/asm-m68k/rtc.h Realtime clock header file
+- include/asm-m68k/string.h String function export
+- include/asm-m68k/timer.h Timer structure and definition
+- include/asm-m68k/types.h Data types definition
+- include/asm-m68k/uart.h Uart structure and definition
+- include/asm-m68k/u-boot.h u-boot structure
+
+- include/configs/M5373EVB.h Board specific configuration file
+
+- lib_m68k/board.c board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/time.c Timer functions (Dma timer and PIT)
+- lib_m68k/traps.c Exception init code
+
+1 MCF5373 specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M5373EVB Development Board
+CONFIG_MCF532x -- define for all MCF532x CPUs
+CONFIG_M5373 -- define for all Freescale MCF5373 CPUs
+CONFIG_M5373EVB -- define for M5373EVB board
+
+CONFIG_MCFUART -- define to use common CF Uart driver
+CFG_UART_PORT -- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE -- define UART baudrate
+
+CONFIG_MCFRTC -- define to use common CF RTC driver
+CFG_MCFRTC_BASE -- provide base address for RTC in immap.h
+CFG_RTC_OSCILLATOR -- define RTC clock frequency
+RTC_DEBUG -- define to show RTC debug message
+CONFIG_CMD_DATE -- enable to use date feature in u-boot
+
+CONFIG_MCFFEC -- define to use common CF FEC driver
+CONFIG_NET_MULTI -- define to use multi FEC in u-boot
+CONFIG_MII -- enable to use MII driver
+CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
+CFG_DISCOVER_PHY -- enable PHY discovery
+CFG_RX_ETH_BUFFER -- Set FEC Receive buffer
+CFG_FAULT_ECHO_LINK_DOWN--
+CFG_FEC0_PINMUX -- Set FEC0 Pin configuration
+CFG_FEC0_MIIBASE -- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP -- set FEC timeout loop
+
+CONFIG_MCFTMR -- define to use DMA timer
+CONFIG_MCFPIT -- define to use PIT timer
+
+CONFIG_FSL_I2C -- define to use FSL common I2C driver
+CONFIG_HARD_I2C -- define for I2C hardware support
+CONFIG_SOFT_I2C -- define for I2C bit-banged
+CFG_I2C_SPEED -- define for I2C speed
+CFG_I2C_SLAVE -- define for I2C slave address
+CFG_I2C_OFFSET -- define for I2C base address offset
+CFG_IMMR -- define for MBAR offset
+
+CFG_MBAR -- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CFG_INIT_RAM_ADDR -- defines the base address of the MCF5373 internal SRAM
+
+CFG_CSn_BASE -- defines the Chip Select Base register
+CFG_CSn_MASK -- defines the Chip Select Mask register
+CFG_CSn_CTRL -- defines the Chip Select Control register
+
+CFG_SDRAM_BASE -- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+ Flash: 0x00000000-0x3FFFFFFF (1024MB)
+ DDR: 0x40000000-0x7FFFFFFF (1024MB)
+ SRAM: 0x80000000-0x8FFFFFFF (256MB)
+ IP: 0xF0000000-0xFFFFFFFF (256MB)
+
+2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+ linux kernel, you can customize it based on your system requirements:
+ Flash0: 0x00000000-0x00FFFFFF (16MB)
+
+ DDR: 0x40000000-0x4FFFFFFF (256MB)
+ SRAM: 0x80000000-0x80007FFF (32KB)
+ IP: 0xFC000000-0xFC0FFFFF (64KB)
+
+3. COMPILATION
+==============
+3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
+uClinux version) from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+ export CROSS_COMPILE=cross-compile-prefix
+ cd u-boot-1.x.x
+ make distclean
+ make M5373EVB_config
+ make
+
+4. SCREEN DUMP
+==============
+4.1 M5373EVB Development board
+ (NOTE: May not show exactly the same)
+
+U-Boot 1.3.0 (Nov 8 2007 - 12:44:08)
+
+CPU: Freescale MCF5373 (Mask:65 Version:1)
+ CPU CLK 240 Mhz BUS CLK 80 Mhz
+Board: Freescale FireEngine 5373 EVB
+I2C: ready
+DRAM: 32 MB
+FLASH: 2 MB
+In: serial
+Out: serial
+Err: serial
+NAND: 16 MiB
+Net: FEC0
+-> print
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+hostname=M5373EVB
+netdev=eth0
+loadaddr=40010000
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save
+ethact=FEC0
+u-boot=u-boot.bin
+gatewayip=192.168.1.1
+netmask=255.255.255.0
+ipaddr=192.168.1.3
+serverip=192.168.1.2
+stdin=serial
+stdout=serial
+stderr=serial
+mem=261632k
+
+Environment size: 401/8188 bytes
+-> bdinfo
+memstart = 0x40000000
+memsize = 0x02000000
+flashstart = 0x00000000
+flashsize = 0x00200000
+flashoffset = 0x00000000
+sramstart = 0x80000000
+sramsize = 0x00008000
+mbar = 0xFC000000
+busfreq = 80 MHz
+ethaddr = 00:E0:0C:BC:E5:60
+ip_addr = 192.168.1.3
+baudrate = 115200 bps
+->
+-> help
+? - alias for 'help'
+autoscr - run script from memory
+base - print or set address offset
+bdinfo - print Board Info structure
+boot - boot default, i.e., run 'bootcmd'
+bootd - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm - boot application image from memory
+bootp - boot image via network using BootP/TFTP protocol
+bootvx - Boot vxWorks from an ELF image
+cmp - memory compare
+coninfo - print console devices and information
+cp - memory copy
+crc32 - checksum calculation
+date - get/set/reset date & time
+dcache - enable or disable data cache
+echo - echo args to console
+erase - erase FLASH memory
+flinfo - print FLASH memory information
+go - start application at address 'addr'
+help - print online help
+icache - enable or disable instruction cache
+icrc32 - checksum calculation
+iloop - infinite loop on address range
+imd - i2c memory display
+iminfo - print header information for application image
+imls - list all images found in flash
+imm - i2c memory modify (auto-incrementing)
+imw - memory write (fill)
+inm - memory modify (constant address)
+iprobe - probe to discover valid I2C chip addresses
+itest - return true/false on integer compare
+loadb - load binary file over serial line (kermit mode)
+loads - load S-Record file over serial line
+loady - load binary file over serial line (ymodem mode)
+loop - infinite loop on address range
+ls - list files in a directory (default /)
+md - memory display
+mii - MII utility commands
+mm - memory modify (auto-incrementing)
+mtest - simple RAM test
+mw - memory write (fill)
+nand - NAND sub-system
+nboot - boot from NAND device
+nfs - boot image via network using NFS protocol
+nm - memory modify (constant address)
+ping - send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset - Perform RESET of the CPU
+run - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv - set environment variables
+sleep - delay execution for some time
+tftpboot- boot image via network using TFTP protocol
+version - print monitor version
+-> tftp 0x40800000 uImage
+Using FEC0 device
+TFTP from server 192.168.1.3; our IP address is 192.168.1.3 Filename 'uImage'.
+Load address: 0x40800000
+Loading: #################################################################
+ #################################################################
+ ##########
+done
+Bytes transferred = 2053270 (1f5496 hex)
+-> bootm 0x40800000
+## Booting image at 40800000 ...
+ Image Name: Linux Kernel Image
+ Created: 2007-11-07 20:33:08 UTC
+ Image Type: M68K Linux Kernel Image (gzip compressed)
+ Data Size: 2053206 Bytes = 2 MB
+ Load Address: 40020000
+ Entry Point: 40020000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+Linux version 2.6.22-uc1 (mattw@loa) (gcc version 4.2.1 (Sourcery G++ Lite 4.2-7
+
+
+uClinux/COLDFIRE(m537x)
+COLDFIRE port done by Greg Ungerer, gerg@snapgear.com Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne Built 1 zonelists. Total pages: 8128 Kernel command line: rootfstype=romfs PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory available: 28092k/32768k RAM, (1788k kernel code, 244k data) Mount-cache hash table entries: 512
+NET: Registered protocol family 16
+USB-MCF537x: (HOST module) EHCI device is registered
+USB-MCF537x: (OTG module) EHCI device is registered
+USB-MCF537x: (OTG module) UDC device is registered
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+NET: Registered protocol family 2
+IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
+TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered
+JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
+io scheduler noop registered
+io scheduler cfq registered (default)
+ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART
+ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART
+ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+loop: module loaded
+nbd: registered device at major 43
+usbcore: registered new interface driver ub FEC ENET Version 0.2
+fec: PHY @ 0x1, ID 0x20005c90 -- DP83848
+eth0: ethernet 00:e0:0c:bc:e5:60
+uclinux[mtd]: RAM probe address=0x4021c22c size=0x22b000 Creating 1 MTD partitions on "RAM":
+0x00000000-0x0022b000 : "ROMfs"
+uclinux[mtd]: set ROMfs to be root filesystem NAND device: Manufacturer ID: 0x20, Chip ID: 0x73 (ST Micro NAND 16MiB 3,3V 8-b) Scanning device for bad blocks Creating 1 MTD partitions on "NAND 16MiB 3,3V 8-bit":
+0x00000000-0x01000000 : "M53xx flash partition 1"
+QSPI: spi->max_speed_hz 300000
+QSPI: Baud set to 255
+SPI: Coldfire master initialized
+M537x - Disable UART1 when using Audio
+udc: Freescale MCF53xx UDC driver version 27 October 2006 init
+udc: MCF53xx USB Device is found. ID=0x5 Rev=0x41 i2c /dev entries driver
+usbcore: registered new interface driver usbhid
+drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered
+NET: Registered protocol family 1
+NET: Registered protocol family 17
+VFS: Mounted root (romfs filesystem) readonly.
+Freeing unused kernel memory: 64k freed (0x401f5000 - 0x40204000) init started: BusyBox v1.00 (2007.11.07-19:57+0000) multi-call binary?Setting e Mounting filesystems
+mount: Mounting devpts on /dev/pts failed: No such device
+mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory Starting syslogd and klogd Setting up networking on loopback device:
+Setting up networking on eth0:
+info, udhcpc (v0.9.9-pre) started
+eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
+debug, Sending discover...
+debug, Sending discover...
+debug, Sending select for 172.27.0.130...
+info, Lease of 172.27.0.130 obtained, lease time 43200 deleting routers
+route: SIOC[ADD|DEL]RT: No such process
+adding dns 172.27.0.1
+Starting the boa webserver:
+Setting time from ntp server: ntp.cs.strath.ac.uk
+ntp.cs.strath.ac.uk: Unknown host
+
+
+BusyBox v1.00 (2007.11.07-19:57+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands.
+
+#
diff --git a/doc/README.m5475evb b/doc/README.m5475evb
new file mode 100644
index 0000000..cec4fd0
--- /dev/null
+++ b/doc/README.m5475evb
@@ -0,0 +1,279 @@
+Freescale MCF5475EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created Jan 08, 2008
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m547xevb/m547xevb.c Dram setup, IDE pre init, and PCI init
+- board/freescale/m547xevb/mii.c MII init
+- board/freescale/m547xevb/Makefile Makefile
+- board/freescale/m547xevb/config.mk config make
+- board/freescale/m547xevb/u-boot.lds Linker description
+
+- cpu/mcf547x_8x/cpu.c cpu specific code
+- cpu/mcf547x_8x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
+- cpu/mcf547x_8x/interrupts.c cpu specific interrupt support
+- cpu/mcf547x_8x/slicetimer.c Timer support
+- cpu/mcf547x_8x/speed.c system, pci, flexbus, and cpu clock
+- cpu/mcf547x_8x/Makefile Makefile
+- cpu/mcf547x_8x/config.mk config make
+- cpu/mcf547x_8x/start.S start up assembly code
+
+- doc/README.m5475evb This readme file
+
+- drivers/dma/MCD_dmaApi.c DMA API functions
+- drivers/dma/MCD_tasks.c DMA Tasks
+- drivers/dma/MCD_tasksInit.c DMA Tasks Init
+- drivers/net/fsl_mcdmafec.c ColdFire common DMA FEC driver
+- drivers/serial/mcfuart.c ColdFire common UART driver
+
+- include/MCD_dma.h DMA header file
+- include/MCD_progCheck.h DMA header file
+- include/MCD_tasksInit.h DMA header file
+- include/asm-m68k/bitops.h Bit operation function export
+- include/asm-m68k/byteorder.h Byte order functions
+- include/asm-m68k/errno.h Error Number definition
+- include/asm-m68k/fec.h FEC structure and definition
+- include/asm-m68k/fsl_i2c.h I2C structure and definition
+- include/asm-m68k/fsl_mcddmafec.h DMA FEC structure and definition
+- include/asm-m68k/global_data.h Global data structure
+- include/asm-m68k/immap.h ColdFire specific header file and driver macros
+- include/asm-m68k/immap_547x_8x.h mcf547x_8x specific header file
+- include/asm-m68k/io.h io functions
+- include/asm-m68k/m547x_8x.h mcf547x_8x specific header file
+- include/asm-m68k/posix_types.h Posix
+- include/asm-m68k/processor.h header file
+- include/asm-m68k/ptrace.h Exception structure
+- include/asm-m68k/rtc.h Realtime clock header file
+- include/asm-m68k/string.h String function export
+- include/asm-m68k/timer.h Timer structure and definition
+- include/asm-m68k/types.h Data types definition
+- include/asm-m68k/uart.h Uart structure and definition
+- include/asm-m68k/u-boot.h u-boot structure
+
+- include/configs/M5475EVB.h Board specific configuration file
+
+- lib_m68k/board.c board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/traps.c Exception init code
+
+1 MCF547x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M5475EVB Development Board
+CONFIG_MCF547x_8x -- define for all MCF547x_8x CPUs
+CONFIG_M547x -- define for all Freescale MCF547x CPUs
+CONFIG_M5475 -- define for M5475EVB board
+
+CONFIG_MCFUART -- define to use common CF Uart driver
+CFG_UART_PORT -- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE -- define UART baudrate
+
+CONFIG_FSLDMAFEC -- define to use common dma FEC driver
+CONFIG_NET_MULTI -- define to use multi FEC in u-boot
+CONFIG_MII -- enable to use MII driver
+CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
+CFG_DISCOVER_PHY -- enable PHY discovery
+CFG_RX_ETH_BUFFER -- Set FEC Receive buffer
+CFG_FAULT_ECHO_LINK_DOWN--
+CFG_FEC0_PINMUX -- Set FEC0 Pin configuration
+CFG_FEC1_PINMUX -- Set FEC1 Pin configuration
+CFG_FEC0_MIIBASE -- Set FEC0 MII base register
+CFG_FEC1_MIIBASE -- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP -- set FEC timeout loop
+CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot
+
+CONFIG_CMD_USB -- enable USB commands
+CONFIG_USB_OHCI_NEW -- enable USB OHCI driver
+CONFIG_USB_STORAGE -- enable USB Storage device
+CONFIG_DOS_PARTITION -- enable DOS read/write
+
+CONFIG_SLTTMR -- define to use SLT timer
+
+CONFIG_FSL_I2C -- define to use FSL common I2C driver
+CONFIG_HARD_I2C -- define for I2C hardware support
+CONFIG_SOFT_I2C -- define for I2C bit-banged
+CFG_I2C_SPEED -- define for I2C speed
+CFG_I2C_SLAVE -- define for I2C slave address
+CFG_I2C_OFFSET -- define for I2C base address offset
+CFG_IMMR -- define for MBAR offset
+
+CONFIG_PCI -- define for PCI support
+CONFIG_PCI_PNP -- define for Plug n play support
+CONFIG_SKIPPCI_HOSTBRIDGE -- SKIP PCI Host bridge
+CFG_PCI_MEM_BUS -- PCI memory logical offset
+CFG_PCI_MEM_PHYS -- PCI memory physical offset
+CFG_PCI_MEM_SIZE -- PCI memory size
+CFG_PCI_IO_BUS -- PCI IO logical offset
+CFG_PCI_IO_PHYS -- PCI IO physical offset
+CFG_PCI_IO_SIZE -- PCI IO size
+CFG_PCI_CFG_BUS -- PCI Configuration logical offset
+CFG_PCI_CFG_PHYS -- PCI Configuration physical offset
+CFG_PCI_CFG_SIZE -- PCI Configuration size
+
+CFG_MBAR -- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CFG_INIT_RAM_ADDR -- defines the base address of the MCF547x internal SRAM
+
+CFG_CSn_BASE -- defines the Chip Select Base register
+CFG_CSn_MASK -- defines the Chip Select Mask register
+CFG_CSn_CTRL -- defines the Chip Select Control register
+
+CFG_SDRAM_BASE -- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+ Flash: 0xFF800000-0xFFFFFFFF (8MB)
+ DDR: 0x00000000-0x3FFFFFFF (1024MB)
+ SRAM: 0xF2000000-0xF2000FFF (4KB)
+ PCI: 0x70000000-0x8FFFFFFF (512MB)
+ IP: 0xF0000000-0xFFFFFFFF (256MB)
+
+3. COMPILATION
+==============
+3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
+ version) from codesourcery.com was used. Download it from:
+ http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+ export CROSS_COMPILE=cross-compile-prefix
+ cd u-boot-1.x.x
+ make distclean
+ make M5475AFE_config, or - boot 2MB, RAM 64MB
+ make M5475BFE_config, or - boot 2MB, code 16MB, RAM 64MB
+ make M5475CFE_config, or - boot 2MB, code 16MB, Video, USB, RAM 64MB
+ make M5475DFE_config, or - boot 2MB, USB, RAM 64MB
+ make M5475EFE_config, or - boot 2MB, Video, USB, RAM 64MB
+ make M5475FFE_config, or - boot 2MB, code 32MB, Video, USB, RAM 128MB
+ make M5475GFE_config, or - boot 2MB, RAM 64MB
+ make
+
+5. SCREEN DUMP
+==============
+5.1
+
+U-Boot 1.3.1 (Jan 8 2008 - 12:47:44)
+
+CPU: Freescale MCF5475
+ CPU CLK 266 Mhz BUS CLK 133 Mhz
+Board: Freescale FireEngine 5475 EVB
+I2C: ready
+DRAM: 64 MB
+FLASH: 18 MB
+In: serial
+Out: serial
+Err: serial
+Net: FEC0, FEC1
+-> pri
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+eth1addr=00:e0:0c:bc:e5:61
+ipaddr=192.162.1.2
+serverip=192.162.1.1
+gatewayip=192.162.1.1
+netmask=255.255.255.0
+hostname=M547xEVB
+netdev=eth0
+loadaddr=10000
+u-boot=u-boot.bin
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
+stdin=serial
+stdout=serial
+stderr=serial
+ethact=FEC0
+mem=65024k
+
+Environment size: 433/8188 bytes
+-> bdin
+memstart = 0x00000000
+memsize = 0x04000000
+flashstart = 0xFF800000
+flashsize = 0x01200000
+flashoffset = 0x00000000
+sramstart = 0xF2000000
+sramsize = 0x00001000
+mbar = 0xF0000000
+busfreq = 133.333 MHz
+pcifreq = 0 MHz
+ethaddr = 00:E0:0C:BC:E5:60
+eth1addr = 00:E0:0C:BC:E5:61
+ip_addr = 192.162.1.2
+baudrate = 115200 bps
+-> ?
+? - alias for 'help'
+autoscr - run script from memory
+base - print or set address offset
+bdinfo - print Board Info structure
+boot - boot default, i.e., run 'bootcmd'
+bootd - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm - boot application image from memory
+bootp - boot image via network using BootP/TFTP protocol
+bootvx - Boot vxWorks from an ELF image
+cmp - memory compare
+coninfo - print console devices and information
+cp - memory copy
+crc32 - checksum calculation
+dcache - enable or disable data cache
+echo - echo args to console
+erase - erase FLASH memory
+flinfo - print FLASH memory information
+go - start application at address 'addr'
+help - print online help
+icache - enable or disable instruction cache
+icrc32 - checksum calculation
+iloop - infinite loop on address range
+imd - i2c memory display
+iminfo - print header information for application image
+imls - list all images found in flash
+imm - i2c memory modify (auto-incrementing)
+imw - memory write (fill)
+inm - memory modify (constant address)
+iprobe - probe to discover valid I2C chip addresses
+itest - return true/false on integer compare
+loadb - load binary file over serial line (kermit mode)
+loads - load S-Record file over serial line
+loady - load binary file over serial line (ymodem mode)
+loop - infinite loop on address range
+md - memory display
+mii - MII utility commands
+mm - memory modify (auto-incrementing)
+mtest - simple RAM test
+mw - memory write (fill)
+nfs - boot image via network using NFS protocol
+nm - memory modify (constant address)
+pci - list and access PCI Configuration Space
+ping - send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset - Perform RESET of the CPU
+run - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv - set environment variables
+sleep - delay execution for some time
+tftpboot- boot image via network using TFTP protocol
+usb - USB sub-system
+usbboot - boot from USB device
+version - print monitor version
+-> usb start
+(Re)start USB...
+USB: OHCI pci controller (1131, 1561) found @(0:17:0)
+OHCI regs address 0x80000000
+scanning bus for devices... 2 USB Device(s) found
+ scanning bus for storage devices... 1 Storage Device(s) found
+->
diff --git a/doc/README.mpc8315erdb b/doc/README.mpc8315erdb
new file mode 100644
index 0000000..c630cf8
--- /dev/null
+++ b/doc/README.mpc8315erdb
@@ -0,0 +1,80 @@
+Freescale MPC8315ERDB Board
+-----------------------------------------
+
+1. Board Switches and Jumpers
+
+ S3 is used to set CFG_RESET_SOURCE.
+
+ To boot the image at 0xFE000000 in NOR flash, use these DIP
+ switche settings for S3 S4:
+
+ +------+ +------+
+ | | | **** |
+ | **** | | |
+ +------+ ON +------+ ON
+ 4321 4321
+ (where the '*' indicates the position of the tab of the switch.)
+
+2. Memory Map
+ The memory map looks like this:
+
+ 0x0000_0000 0x07ff_ffff DDR 128M
+ 0x8000_0000 0x8fff_ffff PCI MEM 256M
+ 0x9000_0000 0x9fff_ffff PCI_MMIO 256M
+ 0xe000_0000 0xe00f_ffff IMMR 1M
+ 0xe030_0000 0xe03f_ffff PCI IO 1M
+ 0xe060_0000 0xe060_7fff NAND FLASH (CS1) 32K
+ 0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+ include/configs/MPC8315ERDB.h
+
+ CONFIG_MPC83xx MPC83xx family
+ CONFIG_MPC831x MPC831x specific
+ CONFIG_MPC8315 MPC8315 specific
+ CONFIG_MPC8315ERDB MPC8315ERDB board specific
+
+4. Compilation
+
+ Assuming you're using BASH (or similar) as your shell:
+
+ export CROSS_COMPILE=your-cross-compiler-prefix-
+ make distclean
+ make MPC8315ERDB_config
+ make all
+
+5. Downloading and Flashing Images
+
+5.1 Reflash U-boot Image using U-boot
+
+ tftp 40000 u-boot.bin
+ protect off all
+ erase fe000000 fe1fffff
+
+ cp.b 40000 fe000000 xxxx
+ protect on all
+
+ You have to supply the correct byte count with 'xxxx'
+ from the TFTP result log.
+
+5.2 Downloading and Booting Linux Kernel
+
+ Ensure that all networking-related environment variables are set
+ properly (including ipaddr, serverip, gatewayip (if needed),
+ netmask, ethaddr, eth1addr, rootpath (if using NFS root),
+ fdtfile, and bootfile).
+
+ Then, do one of the following, depending on whether you
+ want an NFS root or a ramdisk root:
+
+ =>run nfsboot
+ or
+ =>run ramboot
+
+6 Notes
+
+ Booting from NAND flash is not yet supported.
+ The console baudrate for MPC8315ERDB is 115200bps.
diff --git a/doc/README.mpc837xerdb b/doc/README.mpc837xerdb
new file mode 100644
index 0000000..8f0192a
--- /dev/null
+++ b/doc/README.mpc837xerdb
@@ -0,0 +1,98 @@
+Freescale MPC837xEMDS Board
+-----------------------------------------
+
+1. Board Description
+
+ The MPC837xE-RDB are reference boards featuring the Freescale MPC8377E,
+ MPC8378E, and the MPC8379E processors in a Mini-ITX form factor.
+
+ The MPC837xE-RDB's have the following common features:
+
+ A) 256-MBytes on-board DDR2 unbuffered SDRAM
+ B) 8-Mbytes NOR Flash
+ C) 32-MBytes NAND Flash
+ D) 1 Secure Digital High Speed Card (SDHC) Interface
+ E) 1 Gigabit Ethernet
+ F) 5-port Ethernet switch (Vitesse 7385)
+ G) 1 32-bit, 3.3 V, PCI slot
+ H) 1 32-bit, 3.3 V, Mini-PCI slot
+ I) 4-port USB 2.0 Hub
+ J) 1-port OTG USB
+ K) 2 serial ports (top main console)
+ L) on board Oscillator: 66M
+
+ The MPC837xE-RDB's have the following differences:
+
+ MPC8377E-RDB MPC8378E-RDB MPC8379E-RDB
+ SATA controllers 2 0 4
+ PCI-Express (mini) 2 2 0
+ SGMII Ports 0 2 0
+
+
+2. Memory Map
+
+2.1. The memory map should look pretty much like this:
+
+ Address Range Device Size Port Size
+ (Bytes) (Bits)
+ =========================== ================= ======= =========
+ 0x0000_0000 0x0fff_ffff DDR 256M 64
+ 0x1000_0000 0x7fff_ffff Empty 1.75G -
+ 0x8000_0000 0x9fff_ffff PCI1 memory space 512M 32
+ 0xa000_0000 0xbfff_ffff PCI2 memory space 512M 32
+ 0xc200_0000 0xc2ff_ffff PCI1 I/O space 16M 32
+ 0xc300_0000 0xc3ff_ffff PCI2 I/O space 16M 32
+ 0xe000_0000 0xe00f_ffff Int Mem Reg Space 1M -
+ 0xe280_0000 0xe47f_ffff NAND Flash 32M 8
+ 0xfe00_0000 0xfe7f_ffff NOR Flash on CS0 8M 16
+
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+ include/configs/MPC837XERDB.h
+
+ CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360
+ CONFIG_MPC837X MPC837x specific
+ CONFIG_MPC837XERDB MPC837XEMDS board specific
+
+
+4. Compilation
+
+ Assuming you're using BASH shell:
+
+ export CROSS_COMPILE=your-cross-compile-prefix
+ cd u-boot
+ make distclean
+ make MPC837XERDB_config
+ make
+
+
+5. Downloading and Flashing Images
+
+5.0 Download over serial line using Kermit:
+
+ loadb $loadaddr
+ [Drop to kermit:
+ ^\c
+ send <u-boot-bin-image>
+ c
+ ]
+
+
+ Or via tftp:
+
+ tftp $loadaddr u-boot.bin
+
+5.1 Reflash U-boot Image using U-boot
+
+ tftp $loadaddr u-boot.bin
+ protect off fe000000 fe0fffff
+ erase fe000000 fe0fffff
+ cp.b $loadaddr fe000000 $filesize
+
+
+6. Additional Notes:
+ 1) The console is connected to the top RS-232 connector and the
+ baudrate for MPC837XE-RDB is 115200bps.
diff --git a/drivers/dma/MCD_dmaApi.c b/drivers/dma/MCD_dmaApi.c
new file mode 100644
index 0000000..b0062b7
--- /dev/null
+++ b/drivers/dma/MCD_dmaApi.c
@@ -0,0 +1,1026 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*Main C file for multi-channel DMA API. */
+
+#include <common.h>
+
+#ifdef CONFIG_FSLDMAFEC
+
+#include <MCD_dma.h>
+#include <MCD_tasksInit.h>
+#include <MCD_progCheck.h>
+
+/********************************************************************/
+/* This is an API-internal pointer to the DMA's registers */
+dmaRegs *MCD_dmaBar;
+
+/*
+ * These are the real and model task tables as generated by the
+ * build process
+ */
+extern TaskTableEntry MCD_realTaskTableSrc[NCHANNELS];
+extern TaskTableEntry MCD_modelTaskTableSrc[NUMOFVARIANTS];
+
+/*
+ * However, this (usually) gets relocated to on-chip SRAM, at which
+ * point we access them as these tables
+ */
+volatile TaskTableEntry *MCD_taskTable;
+TaskTableEntry *MCD_modelTaskTable;
+
+/*
+ * MCD_chStatus[] is an array of status indicators for remembering
+ * whether a DMA has ever been attempted on each channel, pausing
+ * status, etc.
+ */
+static int MCD_chStatus[NCHANNELS] = {
+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA,
+ MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA
+};
+
+/* Prototypes for local functions */
+static void MCD_memcpy(int *dest, int *src, u32 size);
+static void MCD_resmActions(int channel);
+
+/*
+ * Buffer descriptors used for storage of progress info for single Dmas
+ * Also used as storage for the DMA for CRCs for single DMAs
+ * Otherwise, the DMA does not parse these buffer descriptors
+ */
+#ifdef MCD_INCLUDE_EU
+extern MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
+#else
+MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
+#endif
+MCD_bufDesc *MCD_relocBuffDesc;
+
+/* Defines for the debug control register's functions */
+#define DBG_CTL_COMP1_TASK (0x00002000)
+#define DBG_CTL_ENABLE (DBG_CTL_AUTO_ARM | \
+ DBG_CTL_BREAK | \
+ DBG_CTL_INT_BREAK | \
+ DBG_CTL_COMP1_TASK)
+#define DBG_CTL_DISABLE (DBG_CTL_AUTO_ARM | \
+ DBG_CTL_INT_BREAK | \
+ DBG_CTL_COMP1_TASK)
+#define DBG_KILL_ALL_STAT (0xFFFFFFFF)
+
+/* Offset to context save area where progress info is stored */
+#define CSAVE_OFFSET 10
+
+/* Defines for Byte Swapping */
+#define MCD_BYTE_SWAP_KILLER 0xFFF8888F
+#define MCD_NO_BYTE_SWAP_ATALL 0x00040000
+
+/* Execution Unit Identifiers */
+#define MAC 0 /* legacy - not used */
+#define LUAC 1 /* legacy - not used */
+#define CRC 2 /* legacy - not used */
+#define LURC 3 /* Logic Unit with CRC */
+
+/* Task Identifiers */
+#define TASK_CHAINNOEU 0
+#define TASK_SINGLENOEU 1
+#ifdef MCD_INCLUDE_EU
+#define TASK_CHAINEU 2
+#define TASK_SINGLEEU 3
+#define TASK_FECRX 4
+#define TASK_FECTX 5
+#else
+#define TASK_CHAINEU 0
+#define TASK_SINGLEEU 1
+#define TASK_FECRX 2
+#define TASK_FECTX 3
+#endif
+
+/*
+ * Structure to remember which variant is on which channel
+ * TBD- need this?
+ */
+typedef struct MCD_remVariants_struct MCD_remVariant;
+struct MCD_remVariants_struct {
+ int remDestRsdIncr[NCHANNELS]; /* -1,0,1 */
+ int remSrcRsdIncr[NCHANNELS]; /* -1,0,1 */
+ s16 remDestIncr[NCHANNELS]; /* DestIncr */
+ s16 remSrcIncr[NCHANNELS]; /* srcIncr */
+ u32 remXferSize[NCHANNELS]; /* xferSize */
+};
+
+/* Structure to remember the startDma parameters for each channel */
+MCD_remVariant MCD_remVariants;
+/********************************************************************/
+/* Function: MCD_initDma
+ * Purpose: Initializes the DMA API by setting up a pointer to the DMA
+ * registers, relocating and creating the appropriate task
+ * structures, and setting up some global settings
+ * Arguments:
+ * dmaBarAddr - pointer to the multichannel DMA registers
+ * taskTableDest - location to move DMA task code and structs to
+ * flags - operational parameters
+ * Return Value:
+ * MCD_TABLE_UNALIGNED if taskTableDest is not 512-byte aligned
+ * MCD_OK otherwise
+ */
+extern u32 MCD_funcDescTab0[];
+
+int MCD_initDma(dmaRegs * dmaBarAddr, void *taskTableDest, u32 flags)
+{
+ int i;
+ TaskTableEntry *entryPtr;
+
+ /* setup the local pointer to register set */
+ MCD_dmaBar = dmaBarAddr;
+
+ /* do we need to move/create a task table */
+ if ((flags & MCD_RELOC_TASKS) != 0) {
+ int fixedSize;
+ u32 *fixedPtr;
+ /*int *tablePtr = taskTableDest;TBD */
+ int varTabsOffset, funcDescTabsOffset, contextSavesOffset;
+ int taskDescTabsOffset;
+ int taskTableSize, varTabsSize, funcDescTabsSize,
+ contextSavesSize;
+ int taskDescTabSize;
+
+ int i;
+
+ /* check if physical address is aligned on 512 byte boundary */
+ if (((u32) taskTableDest & 0x000001ff) != 0)
+ return (MCD_TABLE_UNALIGNED);
+
+ /* set up local pointer to task Table */
+ MCD_taskTable = taskTableDest;
+
+ /*
+ * Create a task table:
+ * - compute aligned base offsets for variable tables and
+ * function descriptor tables, then
+ * - loop through the task table and setup the pointers
+ * - copy over model task table with the the actual task
+ * descriptor tables
+ */
+
+ taskTableSize = NCHANNELS * sizeof(TaskTableEntry);
+ /* align variable tables to size */
+ varTabsOffset = taskTableSize + (u32) taskTableDest;
+ if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0)
+ varTabsOffset =
+ (varTabsOffset + VAR_TAB_SIZE) & (~VAR_TAB_SIZE);
+ /* align function descriptor tables */
+ varTabsSize = NCHANNELS * VAR_TAB_SIZE;
+ funcDescTabsOffset = varTabsOffset + varTabsSize;
+
+ if ((funcDescTabsOffset & (FUNCDESC_TAB_SIZE - 1)) != 0)
+ funcDescTabsOffset =
+ (funcDescTabsOffset +
+ FUNCDESC_TAB_SIZE) & (~FUNCDESC_TAB_SIZE);
+
+ funcDescTabsSize = FUNCDESC_TAB_NUM * FUNCDESC_TAB_SIZE;
+ contextSavesOffset = funcDescTabsOffset + funcDescTabsSize;
+ contextSavesSize = (NCHANNELS * CONTEXT_SAVE_SIZE);
+ fixedSize =
+ taskTableSize + varTabsSize + funcDescTabsSize +
+ contextSavesSize;
+
+ /* zero the thing out */
+ fixedPtr = (u32 *) taskTableDest;
+ for (i = 0; i < (fixedSize / 4); i++)
+ fixedPtr[i] = 0;
+
+ entryPtr = (TaskTableEntry *) MCD_taskTable;
+ /* set up fixed pointers */
+ for (i = 0; i < NCHANNELS; i++) {
+ /* update ptr to local value */
+ entryPtr[i].varTab = (u32) varTabsOffset;
+ entryPtr[i].FDTandFlags =
+ (u32) funcDescTabsOffset | MCD_TT_FLAGS_DEF;
+ entryPtr[i].contextSaveSpace = (u32) contextSavesOffset;
+ varTabsOffset += VAR_TAB_SIZE;
+#ifdef MCD_INCLUDE_EU
+ /* if not there is only one, just point to the
+ same one */
+ funcDescTabsOffset += FUNCDESC_TAB_SIZE;
+#endif
+ contextSavesOffset += CONTEXT_SAVE_SIZE;
+ }
+ /* copy over the function descriptor table */
+ for (i = 0; i < FUNCDESC_TAB_NUM; i++) {
+ MCD_memcpy((void *)(entryPtr[i].
+ FDTandFlags & ~MCD_TT_FLAGS_MASK),
+ (void *)MCD_funcDescTab0, FUNCDESC_TAB_SIZE);
+ }
+
+ /* copy model task table to where the context saves stuff
+ leaves off */
+ MCD_modelTaskTable = (TaskTableEntry *) contextSavesOffset;
+
+ MCD_memcpy((void *)MCD_modelTaskTable,
+ (void *)MCD_modelTaskTableSrc,
+ NUMOFVARIANTS * sizeof(TaskTableEntry));
+
+ /* point to local version of model task table */
+ entryPtr = MCD_modelTaskTable;
+ taskDescTabsOffset = (u32) MCD_modelTaskTable +
+ (NUMOFVARIANTS * sizeof(TaskTableEntry));
+
+ /* copy actual task code and update TDT ptrs in local
+ model task table */
+ for (i = 0; i < NUMOFVARIANTS; i++) {
+ taskDescTabSize =
+ entryPtr[i].TDTend - entryPtr[i].TDTstart + 4;
+ MCD_memcpy((void *)taskDescTabsOffset,
+ (void *)entryPtr[i].TDTstart,
+ taskDescTabSize);
+ entryPtr[i].TDTstart = (u32) taskDescTabsOffset;
+ taskDescTabsOffset += taskDescTabSize;
+ entryPtr[i].TDTend = (u32) taskDescTabsOffset - 4;
+ }
+#ifdef MCD_INCLUDE_EU
+ /* Tack single DMA BDs onto end of code so API controls
+ where they are since DMA might write to them */
+ MCD_relocBuffDesc =
+ (MCD_bufDesc *) (entryPtr[NUMOFVARIANTS - 1].TDTend + 4);
+#else
+ /* DMA does not touch them so they can be wherever and we
+ don't need to waste SRAM on them */
+ MCD_relocBuffDesc = MCD_singleBufDescs;
+#endif
+ } else {
+ /* point the would-be relocated task tables and the
+ buffer descriptors to the ones the linker generated */
+
+ if (((u32) MCD_realTaskTableSrc & 0x000001ff) != 0)
+ return (MCD_TABLE_UNALIGNED);
+
+ /* need to add code to make sure that every thing else is
+ aligned properly TBD. this is problematic if we init
+ more than once or after running tasks, need to add
+ variable to see if we have aleady init'd */
+ entryPtr = MCD_realTaskTableSrc;
+ for (i = 0; i < NCHANNELS; i++) {
+ if (((entryPtr[i].varTab & (VAR_TAB_SIZE - 1)) != 0) ||
+ ((entryPtr[i].
+ FDTandFlags & (FUNCDESC_TAB_SIZE - 1)) != 0))
+ return (MCD_TABLE_UNALIGNED);
+ }
+
+ MCD_taskTable = MCD_realTaskTableSrc;
+ MCD_modelTaskTable = MCD_modelTaskTableSrc;
+ MCD_relocBuffDesc = MCD_singleBufDescs;
+ }
+
+ /* Make all channels as totally inactive, and remember them as such: */
+
+ MCD_dmaBar->taskbar = (u32) MCD_taskTable;
+ for (i = 0; i < NCHANNELS; i++) {
+ MCD_dmaBar->taskControl[i] = 0x0;
+ MCD_chStatus[i] = MCD_NO_DMA;
+ }
+
+ /* Set up pausing mechanism to inactive state: */
+ /* no particular values yet for either comparator registers */
+ MCD_dmaBar->debugComp1 = 0;
+ MCD_dmaBar->debugComp2 = 0;
+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
+ MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT;
+
+ /* enable or disable commbus prefetch, really need an ifdef or
+ something to keep from trying to set this in the 8220 */
+ if ((flags & MCD_COMM_PREFETCH_EN) != 0)
+ MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH;
+ else
+ MCD_dmaBar->ptdControl |= PTD_CTL_COMM_PREFETCH;
+
+ return (MCD_OK);
+}
+
+/*********************** End of MCD_initDma() ***********************/
+
+/********************************************************************/
+/* Function: MCD_dmaStatus
+ * Purpose: Returns the status of the DMA on the requested channel
+ * Arguments: channel - channel number
+ * Returns: Predefined status indicators
+ */
+int MCD_dmaStatus(int channel)
+{
+ u16 tcrValue;
+
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ tcrValue = MCD_dmaBar->taskControl[channel];
+ if ((tcrValue & TASK_CTL_EN) == 0) { /* nothing running */
+ /* if last reported with task enabled */
+ if (MCD_chStatus[channel] == MCD_RUNNING
+ || MCD_chStatus[channel] == MCD_IDLE)
+ MCD_chStatus[channel] = MCD_DONE;
+ } else { /* something is running */
+
+ /* There are three possibilities: paused, running or idle. */
+ if (MCD_chStatus[channel] == MCD_RUNNING
+ || MCD_chStatus[channel] == MCD_IDLE) {
+ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT;
+ /* This register is selected to know which initiator is
+ actually asserted. */
+ if ((MCD_dmaBar->ptdDebug >> channel) & 0x1)
+ MCD_chStatus[channel] = MCD_RUNNING;
+ else
+ MCD_chStatus[channel] = MCD_IDLE;
+ /* do not change the status if it is already paused. */
+ }
+ }
+ return MCD_chStatus[channel];
+}
+
+/******************** End of MCD_dmaStatus() ************************/
+
+/********************************************************************/
+/* Function: MCD_startDma
+ * Ppurpose: Starts a particular kind of DMA
+ * Arguments:
+ * srcAddr - the channel on which to run the DMA
+ * srcIncr - the address to move data from, or buffer-descriptor address
+ * destAddr - the amount to increment the source address per transfer
+ * destIncr - the address to move data to
+ * dmaSize - the amount to increment the destination address per transfer
+ * xferSize - the number bytes in of each data movement (1, 2, or 4)
+ * initiator - what device initiates the DMA
+ * priority - priority of the DMA
+ * flags - flags describing the DMA
+ * funcDesc - description of byte swapping, bit swapping, and CRC actions
+ * srcAddrVirt - virtual buffer descriptor address TBD
+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
+ */
+
+int MCD_startDma(int channel, s8 * srcAddr, s16 srcIncr, s8 * destAddr,
+ s16 destIncr, u32 dmaSize, u32 xferSize, u32 initiator,
+ int priority, u32 flags, u32 funcDesc
+#ifdef MCD_NEED_ADDR_TRANS
+ s8 * srcAddrVirt
+#endif
+ )
+{
+ int srcRsdIncr, destRsdIncr;
+ int *cSave;
+ short xferSizeIncr;
+ int tcrCount = 0;
+#ifdef MCD_INCLUDE_EU
+ u32 *realFuncArray;
+#endif
+
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ /* tbd - need to determine the proper response to a bad funcDesc when
+ not including EU functions, for now, assign a benign funcDesc, but
+ maybe should return an error */
+#ifndef MCD_INCLUDE_EU
+ funcDesc = MCD_FUNC_NOEU1;
+#endif
+
+#ifdef MCD_DEBUG
+ printf("startDma:Setting up params\n");
+#endif
+ /* Set us up for task-wise priority. We don't technically need to do
+ this on every start, but since the register involved is in the same
+ longword as other registers that users are in control of, setting
+ it more than once is probably preferable. That since the
+ documentation doesn't seem to be completely consistent about the
+ nature of the PTD control register. */
+ MCD_dmaBar->ptdControl |= (u16) 0x8000;
+
+ /* Not sure what we need to keep here rtm TBD */
+#if 1
+ /* Calculate additional parameters to the regular DMA calls. */
+ srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0);
+ destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0);
+
+ xferSizeIncr = (xferSize & 0xffff) | 0x20000000;
+
+ /* Remember for each channel which variant is running. */
+ MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr;
+ MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr;
+ MCD_remVariants.remDestIncr[channel] = destIncr;
+ MCD_remVariants.remSrcIncr[channel] = srcIncr;
+ MCD_remVariants.remXferSize[channel] = xferSize;
+#endif
+
+ cSave =
+ (int *)(MCD_taskTable[channel].contextSaveSpace) + CSAVE_OFFSET +
+ CURRBD;
+
+#ifdef MCD_INCLUDE_EU
+ /* may move this to EU specific calls */
+ realFuncArray =
+ (u32 *) (MCD_taskTable[channel].FDTandFlags & 0xffffff00);
+ /* Modify the LURC's normal and byte-residue-loop functions according
+ to parameter. */
+ realFuncArray[(LURC * 16)] = xferSize == 4 ?
+ funcDesc : xferSize == 2 ?
+ funcDesc & 0xfffff00f : funcDesc & 0xffff000f;
+ realFuncArray[(LURC * 16 + 1)] =
+ (funcDesc & MCD_BYTE_SWAP_KILLER) | MCD_NO_BYTE_SWAP_ATALL;
+#endif
+ /* Write the initiator field in the TCR, and also set the
+ initiator-hold bit. Note that,due to a hardware quirk, this could
+ collide with an MDE access to the initiator-register file, so we
+ have to verify that the write reads back correctly. */
+
+ MCD_dmaBar->taskControl[channel] =
+ (initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM;
+
+ while (((MCD_dmaBar->taskControl[channel] & 0x1fff) !=
+ ((initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM))
+ && (tcrCount < 1000)) {
+ tcrCount++;
+ /*MCD_dmaBar->ptd_tcr[channel] = (initiator << 8) | 0x0020; */
+ MCD_dmaBar->taskControl[channel] =
+ (initiator << 8) | TASK_CTL_HIPRITSKEN |
+ TASK_CTL_HLDINITNUM;
+ }
+
+ MCD_dmaBar->priority[channel] = (u8) priority & PRIORITY_PRI_MASK;
+ /* should be albe to handle this stuff with only one write to ts reg
+ - tbd */
+ if (channel < 8 && channel >= 0) {
+ MCD_dmaBar->taskSize0 &= ~(0xf << (7 - channel) * 4);
+ MCD_dmaBar->taskSize0 |=
+ (xferSize & 3) << (((7 - channel) * 4) + 2);
+ MCD_dmaBar->taskSize0 |= (xferSize & 3) << ((7 - channel) * 4);
+ } else {
+ MCD_dmaBar->taskSize1 &= ~(0xf << (15 - channel) * 4);
+ MCD_dmaBar->taskSize1 |=
+ (xferSize & 3) << (((15 - channel) * 4) + 2);
+ MCD_dmaBar->taskSize1 |= (xferSize & 3) << ((15 - channel) * 4);
+ }
+
+ /* setup task table flags/options which mostly control the line
+ buffers */
+ MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK;
+ MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags);
+
+ if (flags & MCD_FECTX_DMA) {
+ /* TDTStart and TDTEnd */
+ MCD_taskTable[channel].TDTstart =
+ MCD_modelTaskTable[TASK_FECTX].TDTstart;
+ MCD_taskTable[channel].TDTend =
+ MCD_modelTaskTable[TASK_FECTX].TDTend;
+ MCD_startDmaENetXmit(srcAddr, srcAddr, destAddr, MCD_taskTable,
+ channel);
+ } else if (flags & MCD_FECRX_DMA) {
+ /* TDTStart and TDTEnd */
+ MCD_taskTable[channel].TDTstart =
+ MCD_modelTaskTable[TASK_FECRX].TDTstart;
+ MCD_taskTable[channel].TDTend =
+ MCD_modelTaskTable[TASK_FECRX].TDTend;
+ MCD_startDmaENetRcv(srcAddr, srcAddr, destAddr, MCD_taskTable,
+ channel);
+ } else if (flags & MCD_SINGLE_DMA) {
+ /* this buffer descriptor is used for storing off initial
+ parameters for later progress query calculation and for the
+ DMA to write the resulting checksum. The DMA does not use
+ this to determine how to operate, that info is passed with
+ the init routine */
+ MCD_relocBuffDesc[channel].srcAddr = srcAddr;
+ MCD_relocBuffDesc[channel].destAddr = destAddr;
+
+ /* definitely not its final value */
+ MCD_relocBuffDesc[channel].lastDestAddr = destAddr;
+
+ MCD_relocBuffDesc[channel].dmaSize = dmaSize;
+ MCD_relocBuffDesc[channel].flags = 0; /* not used */
+ MCD_relocBuffDesc[channel].csumResult = 0; /* not used */
+ MCD_relocBuffDesc[channel].next = 0; /* not used */
+
+ /* Initialize the progress-querying stuff to show no
+ progress: */
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[SRCPTR + CSAVE_OFFSET] = (int)srcAddr;
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DESTPTR + CSAVE_OFFSET] = (int)destAddr;
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0;
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[CURRBD + CSAVE_OFFSET] =
+(u32) & (MCD_relocBuffDesc[channel]);
+ /* tbd - need to keep the user from trying to call the EU
+ routine when MCD_INCLUDE_EU is not defined */
+ if (funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) {
+ /* TDTStart and TDTEnd */
+ MCD_taskTable[channel].TDTstart =
+ MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart;
+ MCD_taskTable[channel].TDTend =
+ MCD_modelTaskTable[TASK_SINGLENOEU].TDTend;
+ MCD_startDmaSingleNoEu(srcAddr, srcIncr, destAddr,
+ destIncr, dmaSize, xferSizeIncr,
+ flags, (int *)
+ &(MCD_relocBuffDesc[channel]),
+ cSave, MCD_taskTable, channel);
+ } else {
+ /* TDTStart and TDTEnd */
+ MCD_taskTable[channel].TDTstart =
+ MCD_modelTaskTable[TASK_SINGLEEU].TDTstart;
+ MCD_taskTable[channel].TDTend =
+ MCD_modelTaskTable[TASK_SINGLEEU].TDTend;
+ MCD_startDmaSingleEu(srcAddr, srcIncr, destAddr,
+ destIncr, dmaSize, xferSizeIncr,
+ flags, (int *)
+ &(MCD_relocBuffDesc[channel]),
+ cSave, MCD_taskTable, channel);
+ }
+ } else { /* chained DMAS */
+ /* Initialize the progress-querying stuff to show no
+ progress: */
+#if 1
+ /* (!defined(MCD_NEED_ADDR_TRANS)) */
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
+ = (int)((MCD_bufDesc *) srcAddr)->srcAddr;
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
+ = (int)((MCD_bufDesc *) srcAddr)->destAddr;
+#else
+ /* if using address translation, need the virtual addr of the
+ first buffdesc */
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[SRCPTR + CSAVE_OFFSET]
+ = (int)((MCD_bufDesc *) srcAddrVirt)->srcAddr;
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DESTPTR + CSAVE_OFFSET]
+ = (int)((MCD_bufDesc *) srcAddrVirt)->destAddr;
+#endif
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0;
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[CURRBD + CSAVE_OFFSET] = (u32) srcAddr;
+
+ if (funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) {
+ /*TDTStart and TDTEnd */
+ MCD_taskTable[channel].TDTstart =
+ MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart;
+ MCD_taskTable[channel].TDTend =
+ MCD_modelTaskTable[TASK_CHAINNOEU].TDTend;
+ MCD_startDmaChainNoEu((int *)srcAddr, srcIncr,
+ destIncr, xferSize,
+ xferSizeIncr, cSave,
+ MCD_taskTable, channel);
+ } else {
+ /*TDTStart and TDTEnd */
+ MCD_taskTable[channel].TDTstart =
+ MCD_modelTaskTable[TASK_CHAINEU].TDTstart;
+ MCD_taskTable[channel].TDTend =
+ MCD_modelTaskTable[TASK_CHAINEU].TDTend;
+ MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr,
+ xferSize, xferSizeIncr, cSave,
+ MCD_taskTable, channel);
+ }
+ }
+ MCD_chStatus[channel] = MCD_IDLE;
+ return (MCD_OK);
+}
+
+/************************ End of MCD_startDma() *********************/
+
+/********************************************************************/
+/* Function: MCD_XferProgrQuery
+ * Purpose: Returns progress of DMA on requested channel
+ * Arguments: channel - channel to retrieve progress for
+ * progRep - pointer to user supplied MCD_XferProg struct
+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
+ *
+ * Notes:
+ * MCD_XferProgrQuery() upon completing or after aborting a DMA, or
+ * while the DMA is in progress, this function returns the first
+ * DMA-destination address not (or not yet) used in the DMA. When
+ * encountering a non-ready buffer descriptor, the information for
+ * the last completed descriptor is returned.
+ *
+ * MCD_XferProgQuery() has to avoid the possibility of getting
+ * partially-updated information in the event that we should happen
+ * to query DMA progress just as the DMA is updating it. It does that
+ * by taking advantage of the fact context is not saved frequently for
+ * the most part. We therefore read it at least twice until we get the
+ * same information twice in a row.
+ *
+ * Because a small, but not insignificant, amount of time is required
+ * to write out the progress-query information, especially upon
+ * completion of the DMA, it would be wise to guarantee some time lag
+ * between successive readings of the progress-query information.
+ */
+
+/* How many iterations of the loop below to execute to stabilize values */
+#define STABTIME 0
+
+int MCD_XferProgrQuery(int channel, MCD_XferProg * progRep)
+{
+ MCD_XferProg prevRep;
+ int again; /* true if we are to try again to ge
+ consistent results */
+ int i; /* used as a time-waste counter */
+ int destDiffBytes; /* Total no of bytes that we think actually
+ got xfered. */
+ int numIterations; /* number of iterations */
+ int bytesNotXfered; /* bytes that did not get xfered. */
+ s8 *LWAlignedInitDestAddr, *LWAlignedCurrDestAddr;
+ int subModVal, addModVal; /* Mode values to added and subtracted
+ from the final destAddr */
+
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ /* Read a trial value for the progress-reporting values */
+ prevRep.lastSrcAddr =
+ (s8 *) ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
+ prevRep.lastDestAddr =
+ (s8 *) ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DESTPTR + CSAVE_OFFSET];
+ prevRep.dmaSize =
+ ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT +
+ CSAVE_OFFSET];
+ prevRep.currBufDesc =
+ (MCD_bufDesc *) ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[CURRBD + CSAVE_OFFSET];
+ /* Repeatedly reread those values until they match previous values: */
+ do {
+ /* Waste a little bit of time to ensure stability: */
+ for (i = 0; i < STABTIME; i++) {
+ /* make sure this loop does something so that it
+ doesn't get optimized out */
+ i += i >> 2;
+ }
+ /* Check them again: */
+ progRep->lastSrcAddr =
+ (s8 *) ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[SRCPTR + CSAVE_OFFSET];
+ progRep->lastDestAddr =
+ (s8 *) ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DESTPTR + CSAVE_OFFSET];
+ progRep->dmaSize =
+ ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[DCOUNT + CSAVE_OFFSET];
+ progRep->currBufDesc =
+ (MCD_bufDesc *) ((volatile int *)MCD_taskTable[channel].
+ contextSaveSpace)[CURRBD + CSAVE_OFFSET];
+ /* See if they match: */
+ if (prevRep.lastSrcAddr != progRep->lastSrcAddr
+ || prevRep.lastDestAddr != progRep->lastDestAddr
+ || prevRep.dmaSize != progRep->dmaSize
+ || prevRep.currBufDesc != progRep->currBufDesc) {
+ /* If they don't match, remember previous values and
+ try again: */
+ prevRep.lastSrcAddr = progRep->lastSrcAddr;
+ prevRep.lastDestAddr = progRep->lastDestAddr;
+ prevRep.dmaSize = progRep->dmaSize;
+ prevRep.currBufDesc = progRep->currBufDesc;
+ again = MCD_TRUE;
+ } else
+ again = MCD_FALSE;
+ } while (again == MCD_TRUE);
+
+ /* Update the dCount, srcAddr and destAddr */
+ /* To calculate dmaCount, we consider destination address. C
+ overs M1,P1,Z for destination */
+ switch (MCD_remVariants.remDestRsdIncr[channel]) {
+ case MINUS1:
+ subModVal =
+ ((int)progRep->
+ lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) -
+ 1);
+ addModVal =
+ ((int)progRep->currBufDesc->
+ destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
+ LWAlignedInitDestAddr =
+ (progRep->currBufDesc->destAddr) - addModVal;
+ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal;
+ destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr;
+ bytesNotXfered =
+ (destDiffBytes / MCD_remVariants.remDestIncr[channel]) *
+ (MCD_remVariants.remDestIncr[channel]
+ + MCD_remVariants.remXferSize[channel]);
+ progRep->dmaSize =
+ destDiffBytes - bytesNotXfered + addModVal - subModVal;
+ break;
+ case ZERO:
+ progRep->lastDestAddr = progRep->currBufDesc->destAddr;
+ break;
+ case PLUS1:
+ /* This value has to be subtracted from the final
+ calculated dCount. */
+ subModVal =
+ ((int)progRep->currBufDesc->
+ destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1);
+ /* These bytes are already in lastDestAddr. */
+ addModVal =
+ ((int)progRep->
+ lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) -
+ 1);
+ LWAlignedInitDestAddr =
+ (progRep->currBufDesc->destAddr) - subModVal;
+ LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal;
+ destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr);
+ numIterations =
+ (LWAlignedCurrDestAddr -
+ LWAlignedInitDestAddr) /
+ MCD_remVariants.remDestIncr[channel];
+ bytesNotXfered =
+ numIterations * (MCD_remVariants.remDestIncr[channel]
+ - MCD_remVariants.remXferSize[channel]);
+ progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal;
+ break;
+ default:
+ break;
+ }
+
+ /* This covers M1,P1,Z for source */
+ switch (MCD_remVariants.remSrcRsdIncr[channel]) {
+ case MINUS1:
+ progRep->lastSrcAddr =
+ progRep->currBufDesc->srcAddr +
+ (MCD_remVariants.remSrcIncr[channel] *
+ (progRep->dmaSize / MCD_remVariants.remXferSize[channel]));
+ break;
+ case ZERO:
+ progRep->lastSrcAddr = progRep->currBufDesc->srcAddr;
+ break;
+ case PLUS1:
+ progRep->lastSrcAddr =
+ progRep->currBufDesc->srcAddr +
+ (MCD_remVariants.remSrcIncr[channel] *
+ (progRep->dmaSize / MCD_remVariants.remXferSize[channel]));
+ break;
+ default:
+ break;
+ }
+
+ return (MCD_OK);
+}
+
+/******************* End of MCD_XferProgrQuery() ********************/
+
+/********************************************************************/
+/* MCD_resmActions() does the majority of the actions of a DMA resume.
+ * It is called from MCD_killDma() and MCD_resumeDma(). It has to be
+ * a separate function because the kill function has to negate the task
+ * enable before resuming it, but the resume function has to do nothing
+ * if there is no DMA on that channel (i.e., if the enable bit is 0).
+ */
+static void MCD_resmActions(int channel)
+{
+ MCD_dmaBar->debugControl = DBG_CTL_DISABLE;
+ MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus;
+ /* This register is selected to know which initiator is
+ actually asserted. */
+ MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT;
+
+ if ((MCD_dmaBar->ptdDebug >> channel) & 0x1)
+ MCD_chStatus[channel] = MCD_RUNNING;
+ else
+ MCD_chStatus[channel] = MCD_IDLE;
+}
+
+/********************* End of MCD_resmActions() *********************/
+
+/********************************************************************/
+/* Function: MCD_killDma
+ * Purpose: Halt the DMA on the requested channel, without any
+ * intention of resuming the DMA.
+ * Arguments: channel - requested channel
+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
+ *
+ * Notes:
+ * A DMA may be killed from any state, including paused state, and it
+ * always goes to the MCD_HALTED state even if it is killed while in
+ * the MCD_NO_DMA or MCD_IDLE states.
+ */
+int MCD_killDma(int channel)
+{
+ /* MCD_XferProg progRep; */
+
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ MCD_dmaBar->taskControl[channel] = 0x0;
+ MCD_resumeDma(channel);
+ /*
+ * This must be after the write to the TCR so that the task doesn't
+ * start up again momentarily, and before the status assignment so
+ * as to override whatever MCD_resumeDma() may do to the channel
+ * status.
+ */
+ MCD_chStatus[channel] = MCD_HALTED;
+
+ /*
+ * Update the current buffer descriptor's lastDestAddr field
+ *
+ * MCD_XferProgrQuery (channel, &progRep);
+ * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr;
+ */
+ return (MCD_OK);
+}
+
+/************************ End of MCD_killDma() **********************/
+
+/********************************************************************/
+/* Function: MCD_continDma
+ * Purpose: Continue a DMA which as stopped due to encountering an
+ * unready buffer descriptor.
+ * Arguments: channel - channel to continue the DMA on
+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
+ *
+ * Notes:
+ * This routine does not check to see if there is a task which can
+ * be continued. Also this routine should not be used with single DMAs.
+ */
+int MCD_continDma(int channel)
+{
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ MCD_dmaBar->taskControl[channel] |= TASK_CTL_EN;
+ MCD_chStatus[channel] = MCD_RUNNING;
+
+ return (MCD_OK);
+}
+
+/********************** End of MCD_continDma() **********************/
+
+/*********************************************************************
+ * MCD_pauseDma() and MCD_resumeDma() below use the DMA's debug unit
+ * to freeze a task and resume it. We freeze a task by breakpointing
+ * on the stated task. That is, not any specific place in the task,
+ * but any time that task executes. In particular, when that task
+ * executes, we want to freeze that task and only that task.
+ *
+ * The bits of the debug control register influence interrupts vs.
+ * breakpoints as follows:
+ * - Bits 14 and 0 enable or disable debug functions. If enabled, you
+ * will get the interrupt but you may or may not get a breakpoint.
+ * - Bits 2 and 1 decide whether you also get a breakpoint in addition
+ * to an interrupt.
+ *
+ * The debug unit can do these actions in response to either internally
+ * detected breakpoint conditions from the comparators, or in response
+ * to the external breakpoint pin, or both.
+ * - Bits 14 and 1 perform the above-described functions for
+ * internally-generated conditions, i.e., the debug comparators.
+ * - Bits 0 and 2 perform the above-described functions for external
+ * conditions, i.e., the breakpoint external pin.
+ *
+ * Note that, although you "always" get the interrupt when you turn
+ * the debug functions, the interrupt can nevertheless, if desired, be
+ * masked by the corresponding bit in the PTD's IMR. Note also that
+ * this means that bits 14 and 0 must enable debug functions before
+ * bits 1 and 2, respectively, have any effect.
+ *
+ * NOTE: It's extremely important to not pause more than one DMA channel
+ * at a time.
+ ********************************************************************/
+
+/********************************************************************/
+/* Function: MCD_pauseDma
+ * Purpose: Pauses the DMA on a given channel (if any DMA is running
+ * on that channel).
+ * Arguments: channel
+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
+ */
+int MCD_pauseDma(int channel)
+{
+ /* MCD_XferProg progRep; */
+
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) {
+ MCD_dmaBar->debugComp1 = channel;
+ MCD_dmaBar->debugControl =
+ DBG_CTL_ENABLE | (1 << (channel + 16));
+ MCD_chStatus[channel] = MCD_PAUSED;
+
+ /*
+ * Update the current buffer descriptor's lastDestAddr field
+ *
+ * MCD_XferProgrQuery (channel, &progRep);
+ * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr;
+ */
+ }
+ return (MCD_OK);
+}
+
+/************************* End of MCD_pauseDma() ********************/
+
+/********************************************************************/
+/* Function: MCD_resumeDma
+ * Purpose: Resumes the DMA on a given channel (if any DMA is
+ * running on that channel).
+ * Arguments: channel - channel on which to resume DMA
+ * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK
+ */
+int MCD_resumeDma(int channel)
+{
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN)
+ MCD_resmActions(channel);
+
+ return (MCD_OK);
+}
+
+/************************ End of MCD_resumeDma() ********************/
+
+/********************************************************************/
+/* Function: MCD_csumQuery
+ * Purpose: Provide the checksum after performing a non-chained DMA
+ * Arguments: channel - channel to report on
+ * csum - pointer to where to write the checksum/CRC
+ * Returns: MCD_ERROR if the channel is invalid, else MCD_OK
+ *
+ * Notes:
+ *
+ */
+int MCD_csumQuery(int channel, u32 * csum)
+{
+#ifdef MCD_INCLUDE_EU
+ if ((channel < 0) || (channel >= NCHANNELS))
+ return (MCD_CHANNEL_INVALID);
+
+ *csum = MCD_relocBuffDesc[channel].csumResult;
+ return (MCD_OK);
+#else
+ return (MCD_ERROR);
+#endif
+}
+
+/*********************** End of MCD_resumeDma() *********************/
+
+/********************************************************************/
+/* Function: MCD_getCodeSize
+ * Purpose: Provide the size requirements of the microcoded tasks
+ * Returns: Size in bytes
+ */
+int MCD_getCodeSize(void)
+{
+#ifdef MCD_INCLUDE_EU
+ return (0x2b5c);
+#else
+ return (0x173c);
+#endif
+}
+
+/********************** End of MCD_getCodeSize() ********************/
+
+/********************************************************************/
+/* Function: MCD_getVersion
+ * Purpose: Provide the version string and number
+ * Arguments: longVersion - user supplied pointer to a pointer to a char
+ * which points to the version string
+ * Returns: Version number and version string (by reference)
+ */
+char MCD_versionString[] = "Multi-channel DMA API Alpha v0.3 (2004-04-26)";
+#define MCD_REV_MAJOR 0x00
+#define MCD_REV_MINOR 0x03
+
+int MCD_getVersion(char **longVersion)
+{
+ *longVersion = MCD_versionString;
+ return ((MCD_REV_MAJOR << 8) | MCD_REV_MINOR);
+}
+
+/********************** End of MCD_getVersion() *********************/
+
+/********************************************************************/
+/* Private version of memcpy()
+ * Note that everything this is used for is longword-aligned.
+ */
+static void MCD_memcpy(int *dest, int *src, u32 size)
+{
+ u32 i;
+
+ for (i = 0; i < size; i += sizeof(int), dest++, src++)
+ *dest = *src;
+}
+#endif /* CONFIG_FSLDMAFEC */
diff --git a/drivers/dma/MCD_tasks.c b/drivers/dma/MCD_tasks.c
new file mode 100644
index 0000000..694e780
--- /dev/null
+++ b/drivers/dma/MCD_tasks.c
@@ -0,0 +1,2428 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Contains task code and structures for Multi-channel DMA */
+
+#include <MCD_dma.h>
+
+u32 MCD_varTab0[];
+u32 MCD_varTab1[];
+u32 MCD_varTab2[];
+u32 MCD_varTab3[];
+u32 MCD_varTab4[];
+u32 MCD_varTab5[];
+u32 MCD_varTab6[];
+u32 MCD_varTab7[];
+u32 MCD_varTab8[];
+u32 MCD_varTab9[];
+u32 MCD_varTab10[];
+u32 MCD_varTab11[];
+u32 MCD_varTab12[];
+u32 MCD_varTab13[];
+u32 MCD_varTab14[];
+u32 MCD_varTab15[];
+
+u32 MCD_funcDescTab0[];
+#ifdef MCD_INCLUDE_EU
+u32 MCD_funcDescTab1[];
+u32 MCD_funcDescTab2[];
+u32 MCD_funcDescTab3[];
+u32 MCD_funcDescTab4[];
+u32 MCD_funcDescTab5[];
+u32 MCD_funcDescTab6[];
+u32 MCD_funcDescTab7[];
+u32 MCD_funcDescTab8[];
+u32 MCD_funcDescTab9[];
+u32 MCD_funcDescTab10[];
+u32 MCD_funcDescTab11[];
+u32 MCD_funcDescTab12[];
+u32 MCD_funcDescTab13[];
+u32 MCD_funcDescTab14[];
+u32 MCD_funcDescTab15[];
+#endif
+
+u32 MCD_contextSave0[];
+u32 MCD_contextSave1[];
+u32 MCD_contextSave2[];
+u32 MCD_contextSave3[];
+u32 MCD_contextSave4[];
+u32 MCD_contextSave5[];
+u32 MCD_contextSave6[];
+u32 MCD_contextSave7[];
+u32 MCD_contextSave8[];
+u32 MCD_contextSave9[];
+u32 MCD_contextSave10[];
+u32 MCD_contextSave11[];
+u32 MCD_contextSave12[];
+u32 MCD_contextSave13[];
+u32 MCD_contextSave14[];
+u32 MCD_contextSave15[];
+
+u32 MCD_realTaskTableSrc[] = {
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab0, /* Task 0 Variable Table */
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave0, /* Task 0 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab1, /* Task 1 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab1, /* Task 1 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave1, /* Task 1 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab2, /* Task 2 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab2, /* Task 2 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave2, /* Task 2 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab3, /* Task 3 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab3, /* Task 3 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave3, /* Task 3 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab4, /* Task 4 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab4, /* Task 4 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave4, /* Task 4 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab5, /* Task 5 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab5, /* Task 5 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave5, /* Task 5 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab6, /* Task 6 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab6, /* Task 6 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave6, /* Task 6 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab7, /* Task 7 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab7, /* Task 7 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave7, /* Task 7 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab8, /* Task 8 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab8, /* Task 8 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave8, /* Task 8 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab9, /* Task 9 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab9, /* Task 9 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave9, /* Task 9 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab10, /* Task 10 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab10, /* Task 10 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave10, /* Task 10 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab11, /* Task 11 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab11, /* Task 11 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave11, /* Task 11 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab12, /* Task 12 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab12, /* Task 12 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave12, /* Task 12 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab13, /* Task 13 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab13, /* Task 13 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave13, /* Task 13 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab14, /* Task 14 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab14, /* Task 14 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave14, /* Task 14 context save space */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_varTab15, /* Task 15 Variable Table */
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_funcDescTab15, /* Task 15 Fn Desc. Table & Flags */
+#else
+ (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */
+#endif
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_contextSave15, /* Task 15 context save space */
+ 0x00000000,
+};
+
+u32 MCD_varTab0[] = { /* Task 0 Variable Table */
+ 0x00000000, /* var[0] */
+ 0x00000000, /* var[1] */
+ 0x00000000, /* var[2] */
+ 0x00000000, /* var[3] */
+ 0x00000000, /* var[4] */
+ 0x00000000, /* var[5] */
+ 0x00000000, /* var[6] */
+ 0x00000000, /* var[7] */
+ 0x00000000, /* var[8] */
+ 0x00000000, /* var[9] */
+ 0x00000000, /* var[10] */
+ 0x00000000, /* var[11] */
+ 0x00000000, /* var[12] */
+ 0x00000000, /* var[13] */
+ 0x00000000, /* var[14] */
+ 0x00000000, /* var[15] */
+ 0x00000000, /* var[16] */
+ 0x00000000, /* var[17] */
+ 0x00000000, /* var[18] */
+ 0x00000000, /* var[19] */
+ 0x00000000, /* var[20] */
+ 0x00000000, /* var[21] */
+ 0x00000000, /* var[22] */
+ 0x00000000, /* var[23] */
+ 0xe0000000, /* inc[0] */
+ 0x20000000, /* inc[1] */
+ 0x2000ffff, /* inc[2] */
+ 0x00000000, /* inc[3] */
+ 0x00000000, /* inc[4] */
+ 0x00000000, /* inc[5] */
+ 0x00000000, /* inc[6] */
+ 0x00000000, /* inc[7] */
+};
+
+u32 MCD_varTab1[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab2[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab3[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab4[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab5[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab6[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab7[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab8[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab9[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab10[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab11[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab12[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab13[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab14[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_varTab15[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe0000000,
+ 0x20000000,
+ 0x2000ffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_funcDescTab0[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+#ifdef MCD_INCLUDE_EU
+u32 MCD_funcDescTab1[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab2[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab3[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab4[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab5[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab6[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab7[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab8[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab9[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab10[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab11[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab12[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab13[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab14[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+
+u32 MCD_funcDescTab15[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xa0045670,
+ 0xa0000000,
+ 0xa0000000,
+ 0x20000000,
+ 0x21800000,
+ 0x21e00000,
+ 0x20400000,
+ 0x20500000,
+ 0x205a0000,
+ 0x20a00000,
+ 0x202fa000,
+ 0x202f9000,
+ 0x202ea000,
+ 0x202da000,
+ 0x202e2000,
+ 0x202f2000,
+};
+#endif /*MCD_INCLUDE_EU */
+
+u32 MCD_contextSave0[128]; /* Task 0 context save space */
+u32 MCD_contextSave1[128]; /* Task 1 context save space */
+u32 MCD_contextSave2[128]; /* Task 2 context save space */
+u32 MCD_contextSave3[128]; /* Task 3 context save space */
+u32 MCD_contextSave4[128]; /* Task 4 context save space */
+u32 MCD_contextSave5[128]; /* Task 5 context save space */
+u32 MCD_contextSave6[128]; /* Task 6 context save space */
+u32 MCD_contextSave7[128]; /* Task 7 context save space */
+u32 MCD_contextSave8[128]; /* Task 8 context save space */
+u32 MCD_contextSave9[128]; /* Task 9 context save space */
+u32 MCD_contextSave10[128]; /* Task 10 context save space */
+u32 MCD_contextSave11[128]; /* Task 11 context save space */
+u32 MCD_contextSave12[128]; /* Task 12 context save space */
+u32 MCD_contextSave13[128]; /* Task 13 context save space */
+u32 MCD_contextSave14[128]; /* Task 14 context save space */
+u32 MCD_contextSave15[128]; /* Task 15 context save space */
+
+u32 MCD_ChainNoEu_TDT[];
+u32 MCD_SingleNoEu_TDT[];
+#ifdef MCD_INCLUDE_EU
+u32 MCD_ChainEu_TDT[];
+u32 MCD_SingleEu_TDT[];
+#endif
+u32 MCD_ENetRcv_TDT[];
+u32 MCD_ENetXmit_TDT[];
+
+u32 MCD_modelTaskTableSrc[] = {
+ (u32) MCD_ChainNoEu_TDT,
+ (u32) & ((u8 *) MCD_ChainNoEu_TDT)[0x0000016c],
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_SingleNoEu_TDT,
+ (u32) & ((u8 *) MCD_SingleNoEu_TDT)[0x000000d4],
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+#ifdef MCD_INCLUDE_EU
+ (u32) MCD_ChainEu_TDT,
+ (u32) & ((u8 *) MCD_ChainEu_TDT)[0x000001b4],
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_SingleEu_TDT,
+ (u32) & ((u8 *) MCD_SingleEu_TDT)[0x00000124],
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+#endif
+ (u32) MCD_ENetRcv_TDT,
+ (u32) & ((u8 *) MCD_ENetRcv_TDT)[0x0000009c],
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ (u32) MCD_ENetXmit_TDT,
+ (u32) & ((u8 *) MCD_ENetXmit_TDT)[0x000000d0],
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+u32 MCD_ChainNoEu_TDT[] = {
+ 0x80004000,
+ 0x8118801b,
+ 0xb8c60018,
+ 0x10002b10,
+ 0x7000000d,
+ 0x018cf89f,
+ 0x6000000a,
+ 0x080cf89f,
+ 0x000001f8,
+ 0x98180364,
+ 0x8118801b,
+ 0xf8c6001a,
+ 0xb8c6601b,
+ 0x10002710,
+ 0x00000f18,
+ 0xb8c6001d,
+ 0x10001310,
+ 0x60000007,
+ 0x014cf88b,
+ 0x98c6001c,
+ 0x00000710,
+ 0x98c70018,
+ 0x10001f10,
+ 0x0000c818,
+ 0x000001f8,
+ 0xc1476018,
+ 0xc003231d,
+ 0x811a601b,
+ 0xc1862102,
+ 0x849be009,
+ 0x03fed7b8,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x1000cb20,
+ 0x70000006,
+ 0x088cf88f,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf88f,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf88f,
+ 0x1000cb38,
+ 0x0000c728,
+ 0x000001f8,
+ 0xc1476018,
+ 0xc003241d,
+ 0x811a601b,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x0000d3a0,
+ 0xc1862102,
+ 0x849be009,
+ 0x0bfed7b8,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x1000cb20,
+ 0x70000006,
+ 0x088cf88f,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf88f,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf88f,
+ 0x1000cb38,
+ 0x0000c728,
+ 0x000001f8,
+ 0x8118801b,
+ 0xd8c60018,
+ 0x98c6601c,
+ 0x6000000b,
+ 0x0c8cfc9f,
+ 0x000001f8,
+ 0xa146001e,
+ 0x10000b08,
+ 0x10002050,
+ 0xb8c60018,
+ 0x10002b10,
+ 0x7000000a,
+ 0x080cf89f,
+ 0x6000000d,
+ 0x018cf89f,
+ 0x000001f8,
+ 0x8618801b,
+ 0x7000000e,
+ 0x084cf21f,
+ 0xd8990336,
+ 0x8019801b,
+ 0x040001f8,
+ 0x000001f8,
+ 0x000001f8,
+};
+
+u32 MCD_SingleNoEu_TDT[] = {
+ 0x8198001b,
+ 0x7000000d,
+ 0x080cf81f,
+ 0x8198801b,
+ 0x6000000e,
+ 0x084cf85f,
+ 0x000001f8,
+ 0x8298001b,
+ 0x7000000d,
+ 0x010cf81f,
+ 0x6000000e,
+ 0x018cf81f,
+ 0xc202601b,
+ 0xc002221c,
+ 0x809a601b,
+ 0xc10420c2,
+ 0x839be009,
+ 0x03fed7b8,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x70000006,
+ 0x088cf889,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf889,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf889,
+ 0x0000cb38,
+ 0x000001f8,
+ 0xc202601b,
+ 0xc002229c,
+ 0x809a601b,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x0000d3a0,
+ 0xc10420c2,
+ 0x839be009,
+ 0x0bfed7b8,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x70000006,
+ 0x088cf889,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf889,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf889,
+ 0x0000cb38,
+ 0x000001f8,
+ 0xc318022d,
+ 0x8018801b,
+ 0x040001f8,
+};
+
+#ifdef MCD_INCLUDE_EU
+u32 MCD_ChainEu_TDT[] = {
+ 0x80004000,
+ 0x8198801b,
+ 0xb8c68018,
+ 0x10002f10,
+ 0x7000000d,
+ 0x01ccf89f,
+ 0x6000000a,
+ 0x080cf89f,
+ 0x000001f8,
+ 0x981803a4,
+ 0x8198801b,
+ 0xf8c6801a,
+ 0xb8c6e01b,
+ 0x10002b10,
+ 0x00001318,
+ 0xb8c6801d,
+ 0x10001710,
+ 0x60000007,
+ 0x018cf88c,
+ 0x98c6801c,
+ 0x00000b10,
+ 0x98c78018,
+ 0x10002310,
+ 0x0000c820,
+ 0x000001f8,
+ 0x8698801b,
+ 0x7000000f,
+ 0x084cf2df,
+ 0xd899042d,
+ 0x8019801b,
+ 0x60000003,
+ 0x2cd7c7df,
+ 0xd8990364,
+ 0x8019801b,
+ 0x60000003,
+ 0x2c17c7df,
+ 0x000001f8,
+ 0xc1c7e018,
+ 0xc003a35e,
+ 0x819a601b,
+ 0xc206a142,
+ 0x851be009,
+ 0x63fe0000,
+ 0x0d4cfddf,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x70000002,
+ 0x004cf81f,
+ 0x1000cb20,
+ 0x70000006,
+ 0x088cf891,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf891,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf891,
+ 0x1000cb38,
+ 0x0000c728,
+ 0x000001f8,
+ 0xc1c7e018,
+ 0xc003a49e,
+ 0x819a601b,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x0000d3a0,
+ 0xc206a142,
+ 0x851be009,
+ 0x6bfe0000,
+ 0x0d4cfddf,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x70000002,
+ 0x004cf81f,
+ 0x1000cb20,
+ 0x70000006,
+ 0x088cf891,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf891,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf891,
+ 0x1000cb38,
+ 0x0000c728,
+ 0x000001f8,
+ 0x8198801b,
+ 0xd8c68018,
+ 0x98c6e01c,
+ 0x6000000b,
+ 0x0c8cfc9f,
+ 0x0000cc08,
+ 0xa1c6801e,
+ 0x10000f08,
+ 0x10002458,
+ 0xb8c68018,
+ 0x10002f10,
+ 0x7000000a,
+ 0x080cf89f,
+ 0x6000000d,
+ 0x01ccf89f,
+ 0x000001f8,
+ 0x8698801b,
+ 0x7000000e,
+ 0x084cf25f,
+ 0xd899037f,
+ 0x8019801b,
+ 0x040001f8,
+ 0x000001f8,
+ 0x000001f8,
+};
+
+u32 MCD_SingleEu_TDT[] = {
+ 0x8218001b,
+ 0x7000000d,
+ 0x080cf81f,
+ 0x8218801b,
+ 0x6000000e,
+ 0x084cf85f,
+ 0x000001f8,
+ 0x8318001b,
+ 0x7000000d,
+ 0x014cf81f,
+ 0x6000000e,
+ 0x01ccf81f,
+ 0x8498001b,
+ 0x7000000f,
+ 0x080cf19f,
+ 0xd81882a4,
+ 0x8019001b,
+ 0x60000003,
+ 0x2c97c7df,
+ 0xd818826d,
+ 0x8019001b,
+ 0x60000003,
+ 0x2c17c7df,
+ 0x000001f8,
+ 0xc282e01b,
+ 0xc002a25e,
+ 0x811a601b,
+ 0xc184a102,
+ 0x841be009,
+ 0x63fe0000,
+ 0x0d4cfddf,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x70000002,
+ 0x004cf99f,
+ 0x70000006,
+ 0x088cf88b,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf88b,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf88b,
+ 0x0000cb38,
+ 0x000001f8,
+ 0xc282e01b,
+ 0xc002a31e,
+ 0x811a601b,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x0000d3a0,
+ 0xc184a102,
+ 0x841be009,
+ 0x6bfe0000,
+ 0x0d4cfddf,
+ 0xda9b001b,
+ 0x9b9be01b,
+ 0x70000002,
+ 0x004cf99f,
+ 0x70000006,
+ 0x088cf88b,
+ 0x1000cb28,
+ 0x70000006,
+ 0x088cf88b,
+ 0x1000cb30,
+ 0x70000006,
+ 0x088cf88b,
+ 0x0000cb38,
+ 0x000001f8,
+ 0x8144801c,
+ 0x0000c008,
+ 0xc398027f,
+ 0x8018801b,
+ 0x040001f8,
+};
+#endif
+u32 MCD_ENetRcv_TDT[] = {
+ 0x80004000,
+ 0x81988000,
+ 0x10000788,
+ 0x6000000a,
+ 0x080cf05f,
+ 0x98180209,
+ 0x81c40004,
+ 0x7000000e,
+ 0x010cf05f,
+ 0x7000000c,
+ 0x01ccf05f,
+ 0x70000004,
+ 0x014cf049,
+ 0x70000004,
+ 0x004cf04a,
+ 0x00000b88,
+ 0xc4030150,
+ 0x8119e012,
+ 0x03e0cf90,
+ 0x81188000,
+ 0x000ac788,
+ 0xc4030000,
+ 0x8199e000,
+ 0x70000004,
+ 0x084cfc8b,
+ 0x60000005,
+ 0x0cccf841,
+ 0x81c60000,
+ 0xc399021b,
+ 0x80198000,
+ 0x00008400,
+ 0x00000f08,
+ 0x81988000,
+ 0x10000788,
+ 0x6000000a,
+ 0x080cf05f,
+ 0xc2188209,
+ 0x80190000,
+ 0x040001f8,
+ 0x000001f8,
+};
+
+u32 MCD_ENetXmit_TDT[] = {
+ 0x80004000,
+ 0x81988000,
+ 0x10000788,
+ 0x6000000a,
+ 0x080cf05f,
+ 0x98180309,
+ 0x80004003,
+ 0x81c60004,
+ 0x7000000e,
+ 0x014cf05f,
+ 0x7000000c,
+ 0x028cf05f,
+ 0x7000000d,
+ 0x018cf05f,
+ 0x70000004,
+ 0x01ccf04d,
+ 0x10000b90,
+ 0x60000004,
+ 0x020cf0a1,
+ 0xc3188312,
+ 0x83c70000,
+ 0x00001f10,
+ 0xc583a3c3,
+ 0x81042325,
+ 0x03e0c798,
+ 0xd8990000,
+ 0x9999e000,
+ 0x000acf98,
+ 0xd8992306,
+ 0x9999e03f,
+ 0x03eac798,
+ 0xd8990000,
+ 0x9999e000,
+ 0x000acf98,
+ 0xd8990000,
+ 0x99832302,
+ 0x0beac798,
+ 0x81988000,
+ 0x6000000b,
+ 0x0c4cfc5f,
+ 0x81c80000,
+ 0xc5190312,
+ 0x80198000,
+ 0x00008400,
+ 0x00000f08,
+ 0x81988000,
+ 0x10000788,
+ 0x6000000a,
+ 0x080cf05f,
+ 0xc2988309,
+ 0x80190000,
+ 0x040001f8,
+ 0x000001f8,
+};
+
+#ifdef MCD_INCLUDE_EU
+MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
+#endif
diff --git a/drivers/dma/MCD_tasksInit.c b/drivers/dma/MCD_tasksInit.c
new file mode 100644
index 0000000..0d28713
--- /dev/null
+++ b/drivers/dma/MCD_tasksInit.c
@@ -0,0 +1,247 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Functions for initializing variable tables of different types of tasks. */
+
+/*
+ * Do not edit!
+ */
+
+#ifdef CONFIG_FSLDMAFEC
+
+#include <MCD_dma.h>
+
+extern dmaRegs *MCD_dmaBar;
+
+/* Task 0 */
+
+void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr,
+ int xferSize, short xferSizeIncr, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel)
+{
+ volatile TaskTableEntry *taskChan = taskTable + channel;
+
+ MCD_SET_VAR(taskChan, 2, (u32) currBD); /* var[2] */
+ MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */
+ MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */
+ MCD_SET_VAR(taskChan, 11, (u32) xferSize); /* var[11] */
+ MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */
+ MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */
+ MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */
+ MCD_SET_VAR(taskChan, 3, (u32) 0x00000000); /* var[3] */
+ MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */
+ MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */
+ MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */
+ MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */
+ MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */
+ MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */
+ MCD_SET_VAR(taskChan, 10, (u32) 0x00000000); /* var[10] */
+ MCD_SET_VAR(taskChan, 12, (u32) 0x00000000); /* var[12] */
+ MCD_SET_VAR(taskChan, 13, (u32) 0x80000000); /* var[13] */
+ MCD_SET_VAR(taskChan, 14, (u32) 0x00000010); /* var[14] */
+ MCD_SET_VAR(taskChan, 15, (u32) 0x00000004); /* var[15] */
+ MCD_SET_VAR(taskChan, 16, (u32) 0x08000000); /* var[16] */
+ MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */
+ MCD_SET_VAR(taskChan, 28, (u32) 0x80000000); /* inc[4] */
+ MCD_SET_VAR(taskChan, 29, (u32) 0x80000001); /* inc[5] */
+ MCD_SET_VAR(taskChan, 30, (u32) 0x40000000); /* inc[6] */
+
+ /* Set the task's Enable bit in its Task Control Register */
+ MCD_dmaBar->taskControl[channel] |= (u16) 0x8000;
+}
+
+/* Task 1 */
+
+void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr,
+ short destIncr, int dmaSize, short xferSizeIncr,
+ int flags, int *currBD, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel)
+{
+ volatile TaskTableEntry *taskChan = taskTable + channel;
+
+ MCD_SET_VAR(taskChan, 7, (u32) srcAddr); /* var[7] */
+ MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */
+ MCD_SET_VAR(taskChan, 2, (u32) destAddr); /* var[2] */
+ MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */
+ MCD_SET_VAR(taskChan, 3, (u32) dmaSize); /* var[3] */
+ MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */
+ MCD_SET_VAR(taskChan, 5, (u32) flags); /* var[5] */
+ MCD_SET_VAR(taskChan, 1, (u32) currBD); /* var[1] */
+ MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */
+ MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */
+ MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */
+ MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */
+ MCD_SET_VAR(taskChan, 9, (u32) 0x00000004); /* var[9] */
+ MCD_SET_VAR(taskChan, 10, (u32) 0x08000000); /* var[10] */
+ MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */
+ MCD_SET_VAR(taskChan, 28, (u32) 0x80000001); /* inc[4] */
+ MCD_SET_VAR(taskChan, 29, (u32) 0x40000000); /* inc[5] */
+
+ /* Set the task's Enable bit in its Task Control Register */
+ MCD_dmaBar->taskControl[channel] |= (u16) 0x8000;
+}
+
+/* Task 2 */
+
+void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr,
+ int xferSize, short xferSizeIncr, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel)
+{
+ volatile TaskTableEntry *taskChan = taskTable + channel;
+
+ MCD_SET_VAR(taskChan, 3, (u32) currBD); /* var[3] */
+ MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */
+ MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */
+ MCD_SET_VAR(taskChan, 12, (u32) xferSize); /* var[12] */
+ MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */
+ MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */
+ MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */
+ MCD_SET_VAR(taskChan, 2, (u32) 0x00000000); /* var[2] */
+ MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */
+ MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */
+ MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */
+ MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */
+ MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */
+ MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */
+ MCD_SET_VAR(taskChan, 10, (u32) 0x00000000); /* var[10] */
+ MCD_SET_VAR(taskChan, 11, (u32) 0x00000000); /* var[11] */
+ MCD_SET_VAR(taskChan, 13, (u32) 0x00000000); /* var[13] */
+ MCD_SET_VAR(taskChan, 14, (u32) 0x80000000); /* var[14] */
+ MCD_SET_VAR(taskChan, 15, (u32) 0x00000010); /* var[15] */
+ MCD_SET_VAR(taskChan, 16, (u32) 0x00000001); /* var[16] */
+ MCD_SET_VAR(taskChan, 17, (u32) 0x00000004); /* var[17] */
+ MCD_SET_VAR(taskChan, 18, (u32) 0x08000000); /* var[18] */
+ MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */
+ MCD_SET_VAR(taskChan, 28, (u32) 0x80000000); /* inc[4] */
+ MCD_SET_VAR(taskChan, 29, (u32) 0xc0000000); /* inc[5] */
+ MCD_SET_VAR(taskChan, 30, (u32) 0x80000001); /* inc[6] */
+ MCD_SET_VAR(taskChan, 31, (u32) 0x40000000); /* inc[7] */
+
+ /* Set the task's Enable bit in its Task Control Register */
+ MCD_dmaBar->taskControl[channel] |= (u16) 0x8000;
+}
+
+/* Task 3 */
+
+void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr,
+ short destIncr, int dmaSize, short xferSizeIncr,
+ int flags, int *currBD, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel)
+{
+ volatile TaskTableEntry *taskChan = taskTable + channel;
+
+ MCD_SET_VAR(taskChan, 8, (u32) srcAddr); /* var[8] */
+ MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */
+ MCD_SET_VAR(taskChan, 3, (u32) destAddr); /* var[3] */
+ MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */
+ MCD_SET_VAR(taskChan, 4, (u32) dmaSize); /* var[4] */
+ MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */
+ MCD_SET_VAR(taskChan, 6, (u32) flags); /* var[6] */
+ MCD_SET_VAR(taskChan, 2, (u32) currBD); /* var[2] */
+ MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */
+ MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */
+ MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */
+ MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */
+ MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */
+ MCD_SET_VAR(taskChan, 10, (u32) 0x00000001); /* var[10] */
+ MCD_SET_VAR(taskChan, 11, (u32) 0x00000004); /* var[11] */
+ MCD_SET_VAR(taskChan, 12, (u32) 0x08000000); /* var[12] */
+ MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */
+ MCD_SET_VAR(taskChan, 28, (u32) 0xc0000000); /* inc[4] */
+ MCD_SET_VAR(taskChan, 29, (u32) 0x80000000); /* inc[5] */
+ MCD_SET_VAR(taskChan, 30, (u32) 0x80000001); /* inc[6] */
+ MCD_SET_VAR(taskChan, 31, (u32) 0x40000000); /* inc[7] */
+
+ /* Set the task's Enable bit in its Task Control Register */
+ MCD_dmaBar->taskControl[channel] |= (u16) 0x8000;
+}
+
+/* Task 4 */
+
+void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr,
+ volatile TaskTableEntry * taskTable, int channel)
+{
+ volatile TaskTableEntry *taskChan = taskTable + channel;
+
+ MCD_SET_VAR(taskChan, 0, (u32) bDBase); /* var[0] */
+ MCD_SET_VAR(taskChan, 3, (u32) currBD); /* var[3] */
+ MCD_SET_VAR(taskChan, 6, (u32) rcvFifoPtr); /* var[6] */
+ MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */
+ MCD_SET_VAR(taskChan, 2, (u32) 0x00000000); /* var[2] */
+ MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */
+ MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */
+ MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */
+ MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */
+ MCD_SET_VAR(taskChan, 9, (u32) 0x0000ffff); /* var[9] */
+ MCD_SET_VAR(taskChan, 10, (u32) 0x30000000); /* var[10] */
+ MCD_SET_VAR(taskChan, 11, (u32) 0x0fffffff); /* var[11] */
+ MCD_SET_VAR(taskChan, 12, (u32) 0x00000008); /* var[12] */
+ MCD_SET_VAR(taskChan, 24, (u32) 0x00000000); /* inc[0] */
+ MCD_SET_VAR(taskChan, 25, (u32) 0x60000000); /* inc[1] */
+ MCD_SET_VAR(taskChan, 26, (u32) 0x20000004); /* inc[2] */
+ MCD_SET_VAR(taskChan, 27, (u32) 0x40000000); /* inc[3] */
+
+ /* Set the task's Enable bit in its Task Control Register */
+ MCD_dmaBar->taskControl[channel] |= (u16) 0x8000;
+}
+
+/* Task 5 */
+
+void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr,
+ volatile TaskTableEntry * taskTable, int channel)
+{
+ volatile TaskTableEntry *taskChan = taskTable + channel;
+
+ MCD_SET_VAR(taskChan, 0, (u32) bDBase); /* var[0] */
+ MCD_SET_VAR(taskChan, 3, (u32) currBD); /* var[3] */
+ MCD_SET_VAR(taskChan, 11, (u32) xmitFifoPtr); /* var[11] */
+ MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */
+ MCD_SET_VAR(taskChan, 2, (u32) 0x00000000); /* var[2] */
+ MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */
+ MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */
+ MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */
+ MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */
+ MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */
+ MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */
+ MCD_SET_VAR(taskChan, 10, (u32) 0x00000000); /* var[10] */
+ MCD_SET_VAR(taskChan, 12, (u32) 0x00000000); /* var[12] */
+ MCD_SET_VAR(taskChan, 13, (u32) 0x0000ffff); /* var[13] */
+ MCD_SET_VAR(taskChan, 14, (u32) 0xffffffff); /* var[14] */
+ MCD_SET_VAR(taskChan, 15, (u32) 0x00000004); /* var[15] */
+ MCD_SET_VAR(taskChan, 16, (u32) 0x00000008); /* var[16] */
+ MCD_SET_VAR(taskChan, 24, (u32) 0x00000000); /* inc[0] */
+ MCD_SET_VAR(taskChan, 25, (u32) 0x60000000); /* inc[1] */
+ MCD_SET_VAR(taskChan, 26, (u32) 0x40000000); /* inc[2] */
+ MCD_SET_VAR(taskChan, 27, (u32) 0xc000fffc); /* inc[3] */
+ MCD_SET_VAR(taskChan, 28, (u32) 0xe0000004); /* inc[4] */
+ MCD_SET_VAR(taskChan, 29, (u32) 0x80000000); /* inc[5] */
+ MCD_SET_VAR(taskChan, 30, (u32) 0x4000ffff); /* inc[6] */
+ MCD_SET_VAR(taskChan, 31, (u32) 0xe0000001); /* inc[7] */
+
+ /* Set the task's Enable bit in its Task Control Register */
+ MCD_dmaBar->taskControl[channel] |= (u16) 0x8000;
+}
+
+#endif /* CONFIG_FSLDMAFEC */
+
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
new file mode 100644
index 0000000..2dd5a0e
--- /dev/null
+++ b/drivers/dma/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libdma.a
+
+COBJS-y += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 78cec21..67521720 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -28,6 +28,7 @@
COBJS-y += ali512x.o
COBJS-y += ns87308.o
COBJS-y += status_led.o
+COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
new file mode 100644
index 0000000..8bdf5a7
--- /dev/null
+++ b/drivers/misc/fsl_law.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/io.h>
+
+#define LAWAR_EN 0x80000000
+
+void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
+{
+ volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+ volatile u32 *lawbar = base + 8 * idx;
+ volatile u32 *lawar = base + 8 * idx + 2;
+
+ out_be32(lawbar, addr >> 12);
+ out_be32(lawar, LAWAR_EN | ((u32)id << 20) | (u32)sz);
+
+ return ;
+}
+
+void disable_law(u8 idx)
+{
+ volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+ volatile u32 *lawbar = base + 8 * idx;
+ volatile u32 *lawar = base + 8 * idx + 2;
+
+ out_be32(lawar, 0);
+ out_be32(lawbar, 0);
+
+ return;
+}
+
+void init_laws(void)
+{
+ int i;
+ u8 law_idx = 0;
+
+ for (i = 0; i < num_law_entries; i++) {
+ if (law_table[i].index != -1)
+ law_idx = law_table[i].index;
+
+ set_law(law_idx++, law_table[i].addr,
+ law_table[i].size, law_table[i].trgt_id);
+ }
+
+ return ;
+}
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 42864f9..244fa09 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -32,6 +32,8 @@
COBJS-y += nand_bbt.o
COBJS-y += nand_util.o
+COBJS-y += fsl_upm.o
+
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
new file mode 100644
index 0000000..5cc410a
--- /dev/null
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -0,0 +1,201 @@
+/*
+ * FSL UPM NAND driver
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_FSL_UPM)
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/fsl_upm.h>
+#include <nand.h>
+
+#define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */
+#define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */
+#define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */
+#define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */
+
+static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
+{
+ out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset);
+}
+
+static void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+ out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
+ while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+ eieio();
+}
+
+static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
+{
+ out_be32(upm->mar, cmd << (32 - width * 8));
+ out_8(upm->io_addr, 0x0);
+}
+
+static void fsl_upm_setup(struct fsl_upm *upm)
+{
+ int i;
+
+ /* write upm array */
+ out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA);
+
+ for (i = 0; i < 64; i++) {
+ out_be32(upm->mdr, upm->array[i]);
+ out_8(upm->io_addr, 0x0);
+ }
+
+ /* normal operation */
+ out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
+ while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+ eieio();
+}
+
+static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_upm_nand *fun = chip->priv;
+
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+
+ if (command == NAND_CMD_SEQIN) {
+ int readcmd;
+
+ if (column >= mtd->oobblock) {
+ /* OOB area */
+ column -= mtd->oobblock;
+ readcmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ readcmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ readcmd = NAND_CMD_READ1;
+ }
+ fsl_upm_run_pattern(&fun->upm, fun->width, readcmd);
+ }
+
+ fsl_upm_run_pattern(&fun->upm, fun->width, command);
+
+ fsl_upm_end_pattern(&fun->upm);
+
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+
+ if (column != -1)
+ fsl_upm_run_pattern(&fun->upm, fun->width, column);
+
+ if (page_addr != -1) {
+ fsl_upm_run_pattern(&fun->upm, fun->width, page_addr);
+ fsl_upm_run_pattern(&fun->upm, fun->width,
+ (page_addr >> 8) & 0xFF);
+ if (chip->chipsize > (32 << 20)) {
+ fsl_upm_run_pattern(&fun->upm, fun->width,
+ (page_addr >> 16) & 0x0f);
+ }
+ }
+
+ fsl_upm_end_pattern(&fun->upm);
+
+ if (fun->wait_pattern) {
+ /*
+ * Some boards/chips needs this. At least on MPC8360E-RDK we
+ * need it. Probably weird chip, because I don't see any need
+ * for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
+ * 0-2 unexpected busy states per block read.
+ */
+ while (!fun->dev_ready())
+ debug("unexpected busy state\n");
+ }
+}
+
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ out_8(chip->IO_ADDR_W, byte);
+}
+
+static u8 nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return in_8(chip->IO_ADDR_R);
+}
+
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ for (i = 0; i < len; i++)
+ out_8(chip->IO_ADDR_W, buf[i]);
+}
+
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ for (i = 0; i < len; i++)
+ buf[i] = in_8(chip->IO_ADDR_R);
+}
+
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ for (i = 0; i < len; i++) {
+ if (buf[i] != in_8(chip->IO_ADDR_R))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static void nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+}
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_upm_nand *fun = chip->priv;
+
+ return fun->dev_ready();
+}
+
+int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
+{
+ /* yet only 8 bit accessors implemented */
+ if (fun->width != 1)
+ return -ENOSYS;
+
+ fsl_upm_setup(&fun->upm);
+
+ chip->priv = fun;
+ chip->chip_delay = fun->chip_delay;
+ chip->eccmode = NAND_ECC_SOFT;
+ chip->cmdfunc = fun_cmdfunc;
+ chip->hwcontrol = nand_hwcontrol;
+ chip->read_byte = nand_read_byte;
+ chip->read_buf = nand_read_buf;
+ chip->write_byte = nand_write_byte;
+ chip->write_buf = nand_write_buf;
+ chip->verify_buf = nand_verify_buf;
+ chip->dev_ready = nand_dev_ready;
+
+ return 0;
+}
+#endif /* CONFIG_CMD_NAND */
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 2049413..92074b2 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -25,7 +25,7 @@
LIB := $(obj)libonenand.a
-COBJS := onenand_base.o onenand_bbt.o
+COBJS := onenand_uboot.o onenand_base.o onenand_bbt.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 7983a4a..d4003a2 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1271,24 +1271,4 @@
{
}
-/*
- * OneNAND initialization at U-Boot
- */
-struct mtd_info onenand_mtd;
-struct onenand_chip onenand_chip;
-
-void onenand_init(void)
-{
- memset(&onenand_mtd, 0, sizeof(struct mtd_info));
- memset(&onenand_chip, 0, sizeof(struct onenand_chip));
-
- onenand_chip.base = (void *)CFG_ONENAND_BASE;
- onenand_mtd.priv = &onenand_chip;
-
- onenand_scan(&onenand_mtd, 1);
-
- puts("OneNAND: ");
- print_size(onenand_mtd.size, "\n");
-}
-
#endif /* CONFIG_CMD_ONENAND */
diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c
new file mode 100644
index 0000000..bd7466a
--- /dev/null
+++ b/drivers/mtd/onenand/onenand_uboot.c
@@ -0,0 +1,41 @@
+/*
+ * drivers/mtd/onenand/onenand_uboot.c
+ *
+ * Copyright (C) 2005-2008 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * OneNAND initialization at U-Boot
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_CMD_ONENAND
+
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+struct mtd_info onenand_mtd;
+struct onenand_chip onenand_chip;
+
+void onenand_init(void)
+{
+ memset(&onenand_mtd, 0, sizeof(struct mtd_info));
+ memset(&onenand_chip, 0, sizeof(struct onenand_chip));
+
+ onenand_chip.base = (void *) CFG_ONENAND_BASE;
+ onenand_mtd.priv = &onenand_chip;
+
+ onenand_scan(&onenand_mtd, 1);
+
+ puts("OneNAND: ");
+ print_size(onenand_mtd.size, "\n");
+}
+
+#endif /* CONFIG_CMD_ONENAND */
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 41e1bde..b9723fa 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -33,6 +33,7 @@
COBJS-y += e1000.o
COBJS-y += eepro100.o
COBJS-y += enc28j60.o
+COBJS-y += fsl_mcdmafec.o
COBJS-y += inca-ip_sw.o
COBJS-y += ks8695eth.o
COBJS-y += lan91c96.o
diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c
new file mode 100644
index 0000000..0c876f3
--- /dev/null
+++ b/drivers/net/fsl_mcdmafec.c
@@ -0,0 +1,571 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <command.h>
+#include <config.h>
+#include <net.h>
+#include <miiphy.h>
+
+#ifdef CONFIG_FSLDMAFEC
+#undef ET_DEBUG
+#undef MII_DEBUG
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1536
+#define LAST_PKTBUFSRX PKTBUFSRX - 1
+#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
+#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST)
+#define FIFO_ERRSTAT (FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF)
+
+/* RxBD bits definitions */
+#define BD_ENET_RX_ERR (BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \
+ BD_ENET_RX_OV | BD_ENET_RX_TR)
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#include <asm/immap.h>
+#include <asm/fsl_mcdmafec.h>
+
+#include "MCD_dma.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct fec_info_dma fec_info[] = {
+#ifdef CFG_FEC0_IOBASE
+ {
+ 0, /* index */
+ CFG_FEC0_IOBASE, /* io base */
+ CFG_FEC0_PINMUX, /* gpio pin muxing */
+ CFG_FEC0_MIIBASE, /* mii base */
+ -1, /* phy_addr */
+ 0, /* duplex and speed */
+ 0, /* phy name */
+ 0, /* phyname init */
+ 0, /* RX BD */
+ 0, /* TX BD */
+ 0, /* rx Index */
+ 0, /* tx Index */
+ 0, /* tx buffer */
+ 0, /* initialized flag */
+ (struct fec_info_dma *)-1, /* next */
+ FEC0_RX_TASK, /* rxTask */
+ FEC0_TX_TASK, /* txTask */
+ FEC0_RX_PRIORITY, /* rxPri */
+ FEC0_TX_PRIORITY, /* txPri */
+ FEC0_RX_INIT, /* rxInit */
+ FEC0_TX_INIT, /* txInit */
+ 0, /* usedTbdIndex */
+ 0, /* cleanTbdNum */
+ },
+#endif
+#ifdef CFG_FEC1_IOBASE
+ {
+ 1, /* index */
+ CFG_FEC1_IOBASE, /* io base */
+ CFG_FEC1_PINMUX, /* gpio pin muxing */
+ CFG_FEC1_MIIBASE, /* mii base */
+ -1, /* phy_addr */
+ 0, /* duplex and speed */
+ 0, /* phy name */
+ 0, /* phy name init */
+ 0, /* RX BD */
+ 0, /* TX BD */
+ 0, /* rx Index */
+ 0, /* tx Index */
+ 0, /* tx buffer */
+ 0, /* initialized flag */
+ (struct fec_info_dma *)-1, /* next */
+ FEC1_RX_TASK, /* rxTask */
+ FEC1_TX_TASK, /* txTask */
+ FEC1_RX_PRIORITY, /* rxPri */
+ FEC1_TX_PRIORITY, /* txPri */
+ FEC1_RX_INIT, /* rxInit */
+ FEC1_TX_INIT, /* txInit */
+ 0, /* usedTbdIndex */
+ 0, /* cleanTbdNum */
+ }
+#endif
+};
+
+static int fec_send(struct eth_device *dev, volatile void *packet, int length);
+static int fec_recv(struct eth_device *dev);
+static int fec_init(struct eth_device *dev, bd_t * bd);
+static void fec_halt(struct eth_device *dev);
+
+#ifdef ET_DEBUG
+static void dbg_fec_regs(struct eth_device *dev)
+{
+ struct fec_info_dma *info = dev->priv;
+ volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
+
+ printf("=====\n");
+ printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir);
+ printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr);
+ printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr);
+ printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
+ printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr);
+ printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
+ printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr);
+ printf("r hash %x - %x\n", (int)&fecp->rhr, fecp->rhr);
+ printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr);
+ printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr);
+ printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur);
+ printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd);
+ printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur);
+ printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr);
+ printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur);
+ printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr);
+ printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
+ printf("r_fdata %x - %x\n", (int)&fecp->rfdr, fecp->rfdr);
+ printf("r_fstat %x - %x\n", (int)&fecp->rfsr, fecp->rfsr);
+ printf("r_fctrl %x - %x\n", (int)&fecp->rfcr, fecp->rfcr);
+ printf("r_flrfp %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp);
+ printf("r_flwfp %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp);
+ printf("r_frfar %x - %x\n", (int)&fecp->rfar, fecp->rfar);
+ printf("r_frfrp %x - %x\n", (int)&fecp->rfrp, fecp->rfrp);
+ printf("r_frfwp %x - %x\n", (int)&fecp->rfwp, fecp->rfwp);
+ printf("t_fdata %x - %x\n", (int)&fecp->tfdr, fecp->tfdr);
+ printf("t_fstat %x - %x\n", (int)&fecp->tfsr, fecp->tfsr);
+ printf("t_fctrl %x - %x\n", (int)&fecp->tfcr, fecp->tfcr);
+ printf("t_flrfp %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp);
+ printf("t_flwfp %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp);
+ printf("t_ftfar %x - %x\n", (int)&fecp->tfar, fecp->tfar);
+ printf("t_ftfrp %x - %x\n", (int)&fecp->tfrp, fecp->tfrp);
+ printf("t_ftfwp %x - %x\n", (int)&fecp->tfwp, fecp->tfwp);
+ printf("frst %x - %x\n", (int)&fecp->frst, fecp->frst);
+ printf("ctcwr %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr);
+}
+#endif
+
+static void set_fec_duplex_speed(volatile fecdma_t * fecp, bd_t * bd, int dup_spd)
+{
+ if ((dup_spd >> 16) == FULL) {
+ /* Set maximum frame length */
+ fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
+ FEC_RCR_PROM | 0x100;
+ fecp->tcr = FEC_TCR_FDEN;
+ } else {
+ /* Half duplex mode */
+ fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
+ FEC_RCR_MII_MODE | FEC_RCR_DRT;
+ fecp->tcr &= ~FEC_TCR_FDEN;
+ }
+
+ if ((dup_spd & 0xFFFF) == _100BASET) {
+#ifdef MII_DEBUG
+ printf("100Mbps\n");
+#endif
+ bd->bi_ethspeed = 100;
+ } else {
+#ifdef MII_DEBUG
+ printf("10Mbps\n");
+#endif
+ bd->bi_ethspeed = 10;
+ }
+}
+
+static int fec_send(struct eth_device *dev, volatile void *packet, int length)
+{
+ struct fec_info_dma *info = dev->priv;
+ cbd_t *pTbd, *pUsedTbd;
+ u16 phyStatus;
+
+ miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
+
+ /* process all the consumed TBDs */
+ while (info->cleanTbdNum < CFG_TX_ETH_BUFFER) {
+ pUsedTbd = &info->txbd[info->usedTbdIdx];
+ if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
+#ifdef ET_DEBUG
+ printf("Cannot clean TBD %d, in use\n",
+ info->cleanTbdNum);
+#endif
+ return 0;
+ }
+
+ /* clean this buffer descriptor */
+ if (info->usedTbdIdx == (CFG_TX_ETH_BUFFER - 1))
+ pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
+ else
+ pUsedTbd->cbd_sc = 0;
+
+ /* update some indeces for a correct handling of the TBD ring */
+ info->cleanTbdNum++;
+ info->usedTbdIdx = (info->usedTbdIdx + 1) % CFG_TX_ETH_BUFFER;
+ }
+
+ /* Check for valid length of data. */
+ if ((length > 1500) || (length <= 0)) {
+ return -1;
+ }
+
+ /* Check the number of vacant TxBDs. */
+ if (info->cleanTbdNum < 1) {
+ printf("No available TxBDs ...\n");
+ return -1;
+ }
+
+ /* Get the first TxBD to send the mac header */
+ pTbd = &info->txbd[info->txIdx];
+ pTbd->cbd_datlen = length;
+ pTbd->cbd_bufaddr = (u32) packet;
+ pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
+ info->txIdx = (info->txIdx + 1) % CFG_TX_ETH_BUFFER;
+
+ /* Enable DMA transmit task */
+ MCD_continDma(info->txTask);
+
+ info->cleanTbdNum -= 1;
+
+ /* wait until frame is sent . */
+ while (pTbd->cbd_sc & BD_ENET_TX_READY) {
+ udelay(10);
+ }
+
+ return (int)(info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
+}
+
+static int fec_recv(struct eth_device *dev)
+{
+ struct fec_info_dma *info = dev->priv;
+ volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
+
+ cbd_t *pRbd = &info->rxbd[info->rxIdx];
+ u32 ievent;
+ int frame_length, len = 0;
+
+ /* Check if any critical events have happened */
+ ievent = fecp->eir;
+ if (ievent != 0) {
+ fecp->eir = ievent;
+
+ if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) {
+ printf("fec_recv: error\n");
+ fec_halt(dev);
+ fec_init(dev, NULL);
+ return 0;
+ }
+
+ if (ievent & FEC_EIR_HBERR) {
+ /* Heartbeat error */
+ fecp->tcr |= FEC_TCR_GTS;
+ }
+
+ if (ievent & FEC_EIR_GRA) {
+ /* Graceful stop complete */
+ if (fecp->tcr & FEC_TCR_GTS) {
+ printf("fec_recv: tcr_gts\n");
+ fec_halt(dev);
+ fecp->tcr &= ~FEC_TCR_GTS;
+ fec_init(dev, NULL);
+ }
+ }
+ }
+
+ if (!(pRbd->cbd_sc & BD_ENET_RX_EMPTY)) {
+ if ((pRbd->cbd_sc & BD_ENET_RX_LAST)
+ && !(pRbd->cbd_sc & BD_ENET_RX_ERR)
+ && ((pRbd->cbd_datlen - 4) > 14)) {
+
+ /* Get buffer address and size */
+ frame_length = pRbd->cbd_datlen - 4;
+
+ /* Fill the buffer and pass it to upper layers */
+ NetReceive((volatile uchar *)pRbd->cbd_bufaddr,
+ frame_length);
+ len = frame_length;
+ }
+
+ /* Reset buffer descriptor as empty */
+ if ((info->rxIdx) == (PKTBUFSRX - 1))
+ pRbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ else
+ pRbd->cbd_sc = BD_ENET_RX_EMPTY;
+
+ pRbd->cbd_datlen = PKTSIZE_ALIGN;
+
+ /* Now, we have an empty RxBD, restart the DMA receive task */
+ MCD_continDma(info->rxTask);
+
+ /* Increment BD count */
+ info->rxIdx = (info->rxIdx + 1) % PKTBUFSRX;
+ }
+
+ return len;
+}
+
+static void fec_set_hwaddr(volatile fecdma_t * fecp, u8 * mac)
+{
+ u8 currByte; /* byte for which to compute the CRC */
+ int byte; /* loop - counter */
+ int bit; /* loop - counter */
+ u32 crc = 0xffffffff; /* initial value */
+
+ for (byte = 0; byte < 6; byte++) {
+ currByte = mac[byte];
+ for (bit = 0; bit < 8; bit++) {
+ if ((currByte & 0x01) ^ (crc & 0x01)) {
+ crc >>= 1;
+ crc = crc ^ 0xedb88320;
+ } else {
+ crc >>= 1;
+ }
+ currByte >>= 1;
+ }
+ }
+
+ crc = crc >> 26;
+
+ /* Set individual hash table register */
+ if (crc >= 32) {
+ fecp->ialr = (1 << (crc - 32));
+ fecp->iaur = 0;
+ } else {
+ fecp->ialr = 0;
+ fecp->iaur = (1 << crc);
+ }
+
+ /* Set physical address */
+ fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
+ fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
+
+ /* Clear multicast address hash table */
+ fecp->gaur = 0;
+ fecp->galr = 0;
+}
+
+static int fec_init(struct eth_device *dev, bd_t * bd)
+{
+ struct fec_info_dma *info = dev->priv;
+ volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
+ int i;
+
+#ifdef ET_DEBUG
+ printf("fec_init: iobase 0x%08x ...\n", info->iobase);
+#endif
+
+ fecpin_setclear(dev, 1);
+
+ fec_halt(dev);
+
+#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
+ defined (CFG_DISCOVER_PHY)
+
+ mii_init();
+
+ set_fec_duplex_speed(fecp, bd, info->dup_spd);
+#else
+#ifndef CFG_DISCOVER_PHY
+ set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
+#endif /* ifndef CFG_DISCOVER_PHY */
+#endif /* CONFIG_CMD_MII || CONFIG_MII */
+
+ /* We use strictly polling mode only */
+ fecp->eimr = 0;
+
+ /* Clear any pending interrupt */
+ fecp->eir = 0xffffffff;
+
+ /* Set station address */
+ if ((u32) fecp == CFG_FEC0_IOBASE) {
+ fec_set_hwaddr(fecp, bd->bi_enetaddr);
+ } else {
+ fec_set_hwaddr(fecp, bd->bi_enet1addr);
+ }
+
+ /* Set Opcode/Pause Duration Register */
+ fecp->opd = 0x00010020;
+
+ /* Setup Buffers and Buffer Desriptors */
+ info->rxIdx = 0;
+ info->txIdx = 0;
+
+ /* Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings: Empty, Wrap */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN;
+ info->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+ }
+ info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings: Last, Tx CRC */
+ for (i = 0; i < CFG_TX_ETH_BUFFER; i++) {
+ info->txbd[i].cbd_sc = 0;
+ info->txbd[i].cbd_datlen = 0;
+ info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
+ }
+ info->txbd[CFG_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ info->usedTbdIdx = 0;
+ info->cleanTbdNum = CFG_TX_ETH_BUFFER;
+
+ /* Set Rx FIFO alarm and granularity value */
+ fecp->rfcr = 0x0c000000;
+ fecp->rfar = 0x0000030c;
+
+ /* Set Tx FIFO granularity value */
+ fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000;
+ fecp->tfar = 0x00000080;
+
+ fecp->tfwr = 0x2;
+ fecp->ctcwr = 0x03000000;
+
+ /* Enable DMA receive task */
+ MCD_startDma(info->rxTask, /* Dma channel */
+ (s8 *) info->rxbd, /*Source Address */
+ 0, /* Source increment */
+ (s8 *) (&fecp->rfdr), /* dest */
+ 4, /* dest increment */
+ 0, /* DMA size */
+ 4, /* xfer size */
+ info->rxInit, /* initiator */
+ info->rxPri, /* priority */
+ (MCD_FECRX_DMA | MCD_TT_FLAGS_DEF), /* Flags */
+ (MCD_NO_CSUM | MCD_NO_BYTE_SWAP) /* Function description */
+ );
+
+ /* Enable DMA tx task with no ready buffer descriptors */
+ MCD_startDma(info->txTask, /* Dma channel */
+ (s8 *) info->txbd, /*Source Address */
+ 0, /* Source increment */
+ (s8 *) (&fecp->tfdr), /* dest */
+ 4, /* dest incr */
+ 0, /* DMA size */
+ 4, /* xfer size */
+ info->txInit, /* initiator */
+ info->txPri, /* priority */
+ (MCD_FECTX_DMA | MCD_TT_FLAGS_DEF), /* Flags */
+ (MCD_NO_CSUM | MCD_NO_BYTE_SWAP) /* Function description */
+ );
+
+ /* Now enable the transmit and receive processing */
+ fecp->ecr |= FEC_ECR_ETHER_EN;
+
+ return 1;
+}
+
+static void fec_halt(struct eth_device *dev)
+{
+ struct fec_info_dma *info = dev->priv;
+ volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
+ int counter = 0xffff;
+
+ /* issue graceful stop command to the FEC transmitter if necessary */
+ fecp->tcr |= FEC_TCR_GTS;
+
+ /* wait for graceful stop to register */
+ while ((counter--) && (!(fecp->eir & FEC_EIR_GRA))) ;
+
+ /* Disable DMA tasks */
+ MCD_killDma(info->txTask);
+ MCD_killDma(info->rxTask);;
+
+ /* Disable the Ethernet Controller */
+ fecp->ecr &= ~FEC_ECR_ETHER_EN;
+
+ /* Clear FIFO status registers */
+ fecp->rfsr &= FIFO_ERRSTAT;
+ fecp->tfsr &= FIFO_ERRSTAT;
+
+ fecp->frst = 0x01000000;
+
+ /* Issue a reset command to the FEC chip */
+ fecp->ecr |= FEC_ECR_RESET;
+
+ /* wait at least 20 clock cycles */
+ udelay(10000);
+
+#ifdef ET_DEBUG
+ printf("Ethernet task stopped\n");
+#endif
+}
+
+int mcdmafec_initialize(bd_t * bis)
+{
+ struct eth_device *dev;
+ int i;
+
+ for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
+
+ dev =
+ (struct eth_device *)memalign(CFG_CACHELINE_SIZE,
+ sizeof *dev);
+ if (dev == NULL)
+ hang();
+
+ memset(dev, 0, sizeof(*dev));
+
+ sprintf(dev->name, "FEC%d", fec_info[i].index);
+
+ dev->priv = &fec_info[i];
+ dev->init = fec_init;
+ dev->halt = fec_halt;
+ dev->send = fec_send;
+ dev->recv = fec_recv;
+
+ /* setup Receive and Transmit buffer descriptor */
+ fec_info[i].rxbd =
+ (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+ (PKTBUFSRX * sizeof(cbd_t)));
+ fec_info[i].txbd =
+ (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+ (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+ fec_info[i].txbuf =
+ (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
+
+#ifdef ET_DEBUG
+ printf("rxbd %x txbd %x\n",
+ (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
+#endif
+
+ fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name,
+ mcffec_miiphy_read, mcffec_miiphy_write);
+#endif
+
+ if (i > 0)
+ fec_info[i - 1].next = &fec_info[i];
+ }
+ fec_info[i - 1].next = &fec_info[0];
+
+ /* default speed */
+ bis->bi_ethspeed = 10;
+
+ return 1;
+}
+
+#endif /* CONFIG_CMD_NET && CONFIG_NET_MULTI */
+#endif /* CONFIG_FSLDMAFEC */
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
index 4c24805..097f684 100644
--- a/drivers/net/rtl8139.c
+++ b/drivers/net/rtl8139.c
@@ -80,10 +80,7 @@
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
defined(CONFIG_RTL8139)
-#define TICKS_PER_SEC CFG_HZ
-#define TICKS_PER_MS (TICKS_PER_SEC/1000)
-
-#define RTL_TIMEOUT (1*TICKS_PER_SEC)
+#define RTL_TIMEOUT 100000
#define ETH_FRAME_LEN 1514
#define ETH_ALEN 6
@@ -392,6 +389,7 @@
#ifdef DEBUG_RX
printf("rx ring address is %X\n",(unsigned long)rx_ring);
#endif
+ flush_cache((unsigned long)rx_ring, RX_BUF_LEN);
outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf);
/* If we add multicast support, the MAR0 register would have to be
@@ -414,9 +412,10 @@
static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length)
{
- unsigned int status, to;
+ unsigned int status;
unsigned long txstatus;
unsigned int len = length;
+ int i = 0;
ioaddr = dev->iobase;
@@ -432,12 +431,11 @@
tx_buffer[len++] = '\0';
}
+ flush_cache((unsigned long)tx_buffer, length);
outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4);
outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
ioaddr + TxStatus0 + cur_tx*4);
- to = currticks() + RTL_TIMEOUT;
-
do {
status = inw(ioaddr + IntrStatus);
/* Only acknlowledge interrupt sources we can properly handle
@@ -445,7 +443,8 @@
* rtl_poll() function. */
outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
- } while (currticks() < to);
+ udelay(10);
+ } while (i++ < RTL_TIMEOUT);
txstatus = inl(ioaddr + TxStatus0 + cur_tx*4);
@@ -458,8 +457,8 @@
return length;
} else {
#ifdef DEBUG_TX
- printf("tx timeout/error (%d ticks), status %hX txstatus %X\n",
- currticks()-to, status, txstatus);
+ printf("tx timeout/error (%d usecs), status %hX txstatus %X\n",
+ 10*i, status, txstatus);
#endif
rtl_reset(dev);
@@ -489,7 +488,8 @@
#endif
ring_offs = cur_rx % RX_BUF_LEN;
- rx_status = *(unsigned int*)KSEG1ADDR((rx_ring + ring_offs));
+ /* ring_offs is guaranteed being 4-byte aligned */
+ rx_status = le32_to_cpu(*(unsigned int *)(rx_ring + ring_offs));
rx_size = rx_status >> 16;
rx_status &= 0xffff;
@@ -519,6 +519,7 @@
printf("rx packet %d bytes", rx_size-4);
#endif
}
+ flush_cache((unsigned long)rx_ring, RX_BUF_LEN);
cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
outw(cur_rx - 16, ioaddr + RxBufPtr);
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 25392f6..e91d9ea 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -241,10 +241,9 @@
* It will wait for the write to be done (or for a timeout to
* expire) before exiting
*/
-void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
+void write_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum, uint value)
{
volatile tsec_t *regbase = priv->phyregs;
- uint phyid = priv->phyaddr;
int timeout = 1000000;
regbase->miimadd = (phyid << 8) | regnum;
@@ -255,17 +254,19 @@
while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
}
+/* #define to provide old write_phy_reg functionality without duplicating code */
+#define write_phy_reg(priv, regnum, value) write_any_phy_reg(priv,priv->phyaddr,regnum,value)
+
/* Reads register regnum on the device's PHY through the
* registers specified in priv. It lowers and raises the read
* command, and waits for the data to become valid (miimind
* notvalid bit cleared), and the bus to cease activity (miimind
* busy bit cleared), and then returns the value
*/
-uint read_phy_reg(struct tsec_private *priv, uint regnum)
+uint read_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum)
{
uint value;
volatile tsec_t *regbase = priv->phyregs;
- uint phyid = priv->phyaddr;
/* Put the address of the phy, and the register
* number into MIIMADD */
@@ -288,6 +289,9 @@
return value;
}
+/* #define to provide old read_phy_reg functionality without duplicating code */
+#define read_phy_reg(priv,regnum) read_any_phy_reg(priv,priv->phyaddr,regnum)
+
/* Discover which PHY is attached to the device, and configure it
* properly. If the PHY is not recognized, then return 0
* (failure). Otherwise, return 1
@@ -571,6 +575,63 @@
return 0;
}
+/* Parse the RTL8211B's status register for speed and duplex
+ * information
+ */
+uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
+{
+ uint speed;
+
+ mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
+ if ((mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) &&
+ !(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
+ int i = 0;
+
+ puts("Waiting for PHY realtime link");
+ while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
+ /* Timeout reached ? */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ priv->link = 0;
+ break;
+ }
+
+ if ((i++ % 1000) == 0) {
+ putc('.');
+ }
+ udelay(1000); /* 1 ms */
+ mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
+ }
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK)
+ priv->link = 1;
+ else
+ priv->link = 0;
+ }
+
+ if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED);
+
+ switch (speed) {
+ case MIIM_RTL8211B_PHYSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_RTL8211B_PHYSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
+ }
+
+ return 0;
+}
+
/* Parse the cis8201's status register for speed and duplex
* information
*/
@@ -1361,6 +1422,33 @@
},
};
+struct phy_info phy_info_rtl8211b = {
+ 0x001cc91,
+ "RealTek RTL8211B",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_RTL8211B_PHY_STATUS, miim_read, &mii_parse_RTL8211B_sr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
struct phy_info *phy_info[] = {
&phy_info_cis8204,
&phy_info_cis8201,
@@ -1374,6 +1462,7 @@
&phy_info_lxt971,
&phy_info_VSC8244,
&phy_info_dp83865,
+ &phy_info_rtl8211b,
&phy_info_generic,
NULL
};
@@ -1497,18 +1586,6 @@
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
&& !defined(BITBANGMII)
-struct tsec_private *get_priv_for_phy(unsigned char phyaddr)
-{
- int i;
-
- for (i = 0; i < MAXCONTROLLERS; i++) {
- if (privlist[i]->phyaddr == phyaddr)
- return privlist[i];
- }
-
- return NULL;
-}
-
/*
* Read a MII PHY register.
*
@@ -1519,14 +1596,14 @@
unsigned char reg, unsigned short *value)
{
unsigned short ret;
- struct tsec_private *priv = get_priv_for_phy(addr);
+ struct tsec_private *priv = privlist[0];
if (NULL == priv) {
printf("Can't read PHY at address %d\n", addr);
return -1;
}
- ret = (unsigned short)read_phy_reg(priv, reg);
+ ret = (unsigned short)read_any_phy_reg(priv, addr, reg);
*value = ret;
return 0;
@@ -1541,14 +1618,14 @@
static int tsec_miiphy_write(char *devname, unsigned char addr,
unsigned char reg, unsigned short value)
{
- struct tsec_private *priv = get_priv_for_phy(addr);
+ struct tsec_private *priv = privlist[0];
if (NULL == priv) {
printf("Can't write PHY at address %d\n", addr);
return -1;
}
- write_phy_reg(priv, reg, value);
+ write_any_phy_reg(priv, addr, reg, value);
return 0;
}
diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h
index 2f0092a..d4dc15a 100644
--- a/drivers/net/tsec.h
+++ b/drivers/net/tsec.h
@@ -184,6 +184,14 @@
#define MIIM_88E1145_PHY_PAGE 29
#define MIIM_88E1145_PHY_CAL_OV 30
+/* RTL8211B PHY Status Register */
+#define MIIM_RTL8211B_PHY_STATUS 0x11
+#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000
+#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000
+#define MIIM_RTL8211B_PHYSTAT_100 0x4000
+#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000
+#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800
+#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400
/* DM9161 Control register values */
#define MIIM_DM9161_CR_STOP 0x0400
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 6cb25bf..55f37cb 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -40,8 +40,13 @@
.tx_clock = CFG_UEC1_TX_CLK,
.eth_type = CFG_UEC1_ETH_TYPE,
},
+#if (CFG_UEC1_ETH_TYPE == FAST_ETH)
+ .num_threads_tx = UEC_NUM_OF_THREADS_1,
+ .num_threads_rx = UEC_NUM_OF_THREADS_1,
+#else
.num_threads_tx = UEC_NUM_OF_THREADS_4,
.num_threads_rx = UEC_NUM_OF_THREADS_4,
+#endif
.riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
@@ -58,8 +63,13 @@
.tx_clock = CFG_UEC2_TX_CLK,
.eth_type = CFG_UEC2_ETH_TYPE,
},
+#if (CFG_UEC2_ETH_TYPE == FAST_ETH)
+ .num_threads_tx = UEC_NUM_OF_THREADS_1,
+ .num_threads_rx = UEC_NUM_OF_THREADS_1,
+#else
.num_threads_tx = UEC_NUM_OF_THREADS_4,
.num_threads_rx = UEC_NUM_OF_THREADS_4,
+#endif
.riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
@@ -68,7 +78,6 @@
.enet_interface = CFG_UEC2_INTERFACE_MODE,
};
#endif
-
#ifdef CONFIG_UEC_ETH3
static uec_info_t eth3_uec_info = {
.uf_info = {
@@ -77,8 +86,13 @@
.tx_clock = CFG_UEC3_TX_CLK,
.eth_type = CFG_UEC3_ETH_TYPE,
},
+#if (CFG_UEC3_ETH_TYPE == FAST_ETH)
+ .num_threads_tx = UEC_NUM_OF_THREADS_1,
+ .num_threads_rx = UEC_NUM_OF_THREADS_1,
+#else
.num_threads_tx = UEC_NUM_OF_THREADS_4,
.num_threads_rx = UEC_NUM_OF_THREADS_4,
+#endif
.riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
@@ -87,6 +101,29 @@
.enet_interface = CFG_UEC3_INTERFACE_MODE,
};
#endif
+#ifdef CONFIG_UEC_ETH4
+static uec_info_t eth4_uec_info = {
+ .uf_info = {
+ .ucc_num = CFG_UEC4_UCC_NUM,
+ .rx_clock = CFG_UEC4_RX_CLK,
+ .tx_clock = CFG_UEC4_TX_CLK,
+ .eth_type = CFG_UEC4_ETH_TYPE,
+ },
+#if (CFG_UEC4_ETH_TYPE == FAST_ETH)
+ .num_threads_tx = UEC_NUM_OF_THREADS_1,
+ .num_threads_rx = UEC_NUM_OF_THREADS_1,
+#else
+ .num_threads_tx = UEC_NUM_OF_THREADS_4,
+ .num_threads_rx = UEC_NUM_OF_THREADS_4,
+#endif
+ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .tx_bd_ring_len = 16,
+ .rx_bd_ring_len = 16,
+ .phy_address = CFG_UEC4_PHY_ADDR,
+ .enet_interface = CFG_UEC4_INTERFACE_MODE,
+};
+#endif
static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
{
@@ -475,6 +512,8 @@
uec->mii_info = mii_info;
+ qe_set_mii_clk_src(uec->uec_info->uf_info.ucc_num);
+
if (init_mii_management_configuration(umii_regs)) {
printf("%s: The MII Bus is stuck!", dev->name);
err = -1;
@@ -581,21 +620,12 @@
static void phy_change(struct eth_device *dev)
{
uec_private_t *uec = (uec_private_t *)dev->priv;
- uec_t *uec_regs;
- int result = 0;
-
- uec_regs = uec->uec_regs;
-
- /* Delay 5s to give the PHY a chance to change the register state */
- udelay(5000000);
/* Update the link, speed, duplex */
- result = uec->mii_info->phyinfo->read_status(uec->mii_info);
+ uec->mii_info->phyinfo->read_status(uec->mii_info);
/* Adjust the interface according to speed */
- if ((0 == result) || (uec->mii_info->link == 0)) {
- adjust_link(dev);
- }
+ adjust_link(dev);
}
static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
@@ -1120,20 +1150,50 @@
static int uec_init(struct eth_device* dev, bd_t *bd)
{
uec_private_t *uec;
- int err;
+ int err, i;
+ struct phy_info *curphy;
uec = (uec_private_t *)dev->priv;
if (uec->the_first_run == 0) {
- /* Set up the MAC address */
- if (dev->enetaddr[0] & 0x01) {
- printf("%s: MacAddress is multcast address\n",
- __FUNCTION__);
- return -1;
+ err = init_phy(dev);
+ if (err) {
+ printf("%s: Cannot initialize PHY, aborting.\n",
+ dev->name);
+ return err;
+ }
+
+ curphy = uec->mii_info->phyinfo;
+
+ if (curphy->config_aneg) {
+ err = curphy->config_aneg(uec->mii_info);
+ if (err) {
+ printf("%s: Can't negotiate PHY\n", dev->name);
+ return err;
+ }
}
- uec_set_mac_address(uec, dev->enetaddr);
+
+ /* Give PHYs up to 5 sec to report a link */
+ i = 50;
+ do {
+ err = curphy->read_status(uec->mii_info);
+ udelay(100000);
+ } while (((i-- > 0) && !uec->mii_info->link) || err);
+
+ if (err || i <= 0)
+ printf("warning: %s: timeout on PHY link\n", dev->name);
+
uec->the_first_run = 1;
}
+
+ /* Set up the MAC address */
+ if (dev->enetaddr[0] & 0x01) {
+ printf("%s: MacAddress is multcast address\n",
+ __FUNCTION__);
+ return -1;
+ }
+ uec_set_mac_address(uec, dev->enetaddr);
+
err = uec_open(uec, COMM_DIR_RX_AND_TX);
if (err) {
@@ -1141,6 +1201,8 @@
return -1;
}
+ phy_change(dev);
+
return (uec->mii_info->link ? 0 : -1);
}
@@ -1262,6 +1324,10 @@
#ifdef CONFIG_UEC_ETH3
uec_info = ð3_uec_info;
#endif
+ } else if (index == 3) {
+#ifdef CONFIG_UEC_ETH4
+ uec_info = ð4_uec_info;
+#endif
} else {
printf("%s: index is illegal.\n", __FUNCTION__);
return -EINVAL;
@@ -1289,14 +1355,6 @@
return err;
}
- err = init_phy(dev);
- if (err) {
- printf("%s: Cannot initialize PHY, aborting.\n", dev->name);
- return err;
- }
-
- phy_change(dev);
-
return 1;
}
#endif /* CONFIG_QE */
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index ca6faa6..c549b6b 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -28,7 +28,6 @@
#if defined(CONFIG_QE)
-#define UEC_VERBOSE_DEBUG
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
@@ -77,11 +76,10 @@
/* Setting up the MII Mangement Control Register with the value */
out_be32 (&ug_regs->miimcon, (u32) value);
+ sync();
/* Wait till MII management write is complete */
while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY);
-
- udelay (100000);
}
/* Reads from register regnum in the PHY for device dev, */
@@ -101,20 +99,21 @@
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
out_be32 (&ug_regs->miimadd, tmp_reg);
- /* Perform an MII management read cycle */
+ /* clear MII management command cycle */
out_be32 (&ug_regs->miimcom, 0);
+ sync();
+
+ /* Perform an MII management read cycle */
out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE);
/* Wait till MII management write is complete */
while ((in_be32 (&ug_regs->miimind)) &
(MIIMIND_NOT_VALID | MIIMIND_BUSY));
- udelay (100000);
-
/* Read MII management status */
value = (u16) in_be32 (&ug_regs->miimstat);
if (value == 0xffff)
- ugphy_warn
+ ugphy_vdbg
("read wrong value : mii_id %d,mii_reg %d, base %08x",
mii_id, mii_reg, (u32) & (ug_regs->miimcfg));
@@ -270,20 +269,38 @@
{
u16 status;
- /* Do a fake read */
+ /* Status is read once to clear old link state */
phy_read (mii_info, PHY_BMSR);
- /* Read link and autonegotiation status */
- status = phy_read (mii_info, PHY_BMSR);
- if ((status & PHY_BMSR_LS) == 0)
- mii_info->link = 0;
- else
- mii_info->link = 1;
+ /*
+ * Wait if the link is up, and autonegotiation is in progress
+ * (ie - we're capable and it's not done)
+ */
+ status = phy_read(mii_info, PHY_BMSR);
+ if ((status & PHY_BMSR_LS) && (status & PHY_BMSR_AUTN_ABLE)
+ && !(status & PHY_BMSR_AUTN_COMP)) {
+ int i = 0;
- /* If we are autonegotiating, and not done,
- * return an error */
- if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP))
- return -EAGAIN;
+ while (!(status & PHY_BMSR_AUTN_COMP)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > UGETH_AN_TIMEOUT) {
+ mii_info->link = 0;
+ return 0;
+ }
+
+ udelay(1000); /* 1 ms */
+ status = phy_read(mii_info, PHY_BMSR);
+ }
+ mii_info->link = 1;
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (status & PHY_BMSR_LS)
+ mii_info->link = 1;
+ else
+ mii_info->link = 0;
+ }
return 0;
}
@@ -389,16 +406,12 @@
/* PHY and MAC connect */
phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) &
~PHY_BMCR_ISO);
-#ifdef CONFIG_RMII_MODE
- phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT);
-#else
+
phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
-#endif
+
config_genmii_advert (mii_info);
/* Start/restart aneg */
genmii_config_aneg (mii_info);
- /* Delay to wait the aneg compeleted */
- udelay (3000000);
return 0;
}
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
new file mode 100644
index 0000000..0b7a2df
--- /dev/null
+++ b/drivers/spi/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libspi.a
+
+COBJS-y += mpc8xxx_spi.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
new file mode 100644
index 0000000..a3d1c95
--- /dev/null
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright (c) 2006 Ben Warren, Qstreams Networks Inc.
+ * With help from the common/soft_spi and cpu/mpc8260 drivers
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/mpc8xxx_spi.h>
+
+#ifdef CONFIG_HARD_SPI
+
+#define SPI_EV_NE (0x80000000 >> 22) /* Receiver Not Empty */
+#define SPI_EV_NF (0x80000000 >> 23) /* Transmitter Not Full */
+
+#define SPI_MODE_LOOP (0x80000000 >> 1) /* Loopback mode */
+#define SPI_MODE_REV (0x80000000 >> 5) /* Reverse mode - MSB first */
+#define SPI_MODE_MS (0x80000000 >> 6) /* Always master */
+#define SPI_MODE_EN (0x80000000 >> 7) /* Enable interface */
+
+#define SPI_TIMEOUT 1000
+
+void spi_init(void)
+{
+ volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+
+ /*
+ * SPI pins on the MPC83xx are not muxed, so all we do is initialize
+ * some registers
+ */
+ spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN;
+ spi->mode = (spi->mode & 0xfff0ffff) | (1 << 16); /* Use SYSCLK / 8
+ (16.67MHz typ.) */
+ spi->event = 0xffffffff; /* Clear all SPI events */
+ spi->mask = 0x00000000; /* Mask all SPI interrupts */
+ spi->com = 0; /* LST bit doesn't do anything, so disregard */
+}
+
+int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+{
+ volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+ unsigned int tmpdout, tmpdin, event;
+ int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0);
+ int tm, isRead = 0;
+ unsigned char charSize = 32;
+
+ debug("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
+ (int)chipsel, *(uint *) dout, *(uint *) din, bitlen);
+
+ if (chipsel != NULL)
+ (*chipsel) (1); /* select the target chip */
+
+ spi->event = 0xffffffff; /* Clear all SPI events */
+
+ /* handle data in 32-bit chunks */
+ while (numBlks--) {
+ tmpdout = 0;
+ charSize = (bitlen >= 32 ? 32 : bitlen);
+
+ /* Shift data so it's msb-justified */
+ tmpdout = *(u32 *) dout >> (32 - charSize);
+
+ /* The LEN field of the SPMODE register is set as follows:
+ *
+ * Bit length setting
+ * len <= 4 3
+ * 4 < len <= 16 len - 1
+ * len > 16 0
+ */
+
+ if (bitlen <= 16) {
+ if (bitlen <= 4)
+ spi->mode = (spi->mode & 0xff0fffff) |
+ (3 << 20);
+ else
+ spi->mode = (spi->mode & 0xff0fffff) |
+ ((bitlen - 1) << 20);
+ } else {
+ spi->mode = (spi->mode & 0xff0fffff);
+ /* Set up the next iteration if sending > 32 bits */
+ bitlen -= 32;
+ dout += 4;
+ }
+
+ spi->tx = tmpdout; /* Write the data out */
+ debug("*** spi_xfer: ... %08x written\n", tmpdout);
+
+ /*
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * The NE event must be read and cleared first
+ */
+ for (tm = 0, isRead = 0; tm < SPI_TIMEOUT; ++tm) {
+ event = spi->event;
+ if (event & SPI_EV_NE) {
+ tmpdin = spi->rx;
+ spi->event |= SPI_EV_NE;
+ isRead = 1;
+
+ *(u32 *) din = (tmpdin << (32 - charSize));
+ if (charSize == 32) {
+ /* Advance output buffer by 32 bits */
+ din += 4;
+ }
+ }
+ /*
+ * Only bail when we've had both NE and NF events.
+ * This will cause timeouts on RO devices, so maybe
+ * in the future put an arbitrary delay after writing
+ * the device. Arbitrary delays suck, though...
+ */
+ if (isRead && (event & SPI_EV_NF))
+ break;
+ }
+ if (tm >= SPI_TIMEOUT)
+ puts("*** spi_xfer: Time out during SPI transfer");
+
+ debug("*** spi_xfer: transfer ended. Value=%08x\n", tmpdin);
+ }
+
+ if (chipsel != NULL)
+ (*chipsel) (0); /* deselect the target chip */
+
+ return 0;
+}
+#endif /* CONFIG_HARD_SPI */
diff --git a/include/MCD_dma.h b/include/MCD_dma.h
new file mode 100644
index 0000000..2d6bc00
--- /dev/null
+++ b/include/MCD_dma.h
@@ -0,0 +1,386 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _MCD_API_H
+#define _MCD_API_H
+
+/* Turn Execution Unit tasks ON (#define) or OFF (#undef) */
+#undef MCD_INCLUDE_EU
+
+/* Number of DMA channels */
+#define NCHANNELS 16
+
+/* Total number of variants */
+#ifdef MCD_INCLUDE_EU
+#define NUMOFVARIANTS 6
+#else
+#define NUMOFVARIANTS 4
+#endif
+
+/* Define sizes of the various tables */
+#define TASK_TABLE_SIZE (NCHANNELS*32)
+#define VAR_TAB_SIZE (128)
+#define CONTEXT_SAVE_SIZE (128)
+#define FUNCDESC_TAB_SIZE (256)
+
+#ifdef MCD_INCLUDE_EU
+#define FUNCDESC_TAB_NUM 16
+#else
+#define FUNCDESC_TAB_NUM 1
+#endif
+
+#ifndef DEFINESONLY
+
+/* Portability typedefs */
+#if 1
+#include "common.h"
+#else
+#ifndef s32
+typedef int s32;
+#endif
+#ifndef u32
+typedef unsigned int u32;
+#endif
+#ifndef s16
+typedef short s16;
+#endif
+#ifndef u16
+typedef unsigned short u16;
+#endif
+#ifndef s8
+typedef char s8;
+#endif
+#ifndef u8
+typedef unsigned char u8;
+#endif
+#endif
+
+/*
+ * These structures represent the internal registers of the
+ * multi-channel DMA
+ */
+struct dmaRegs_s {
+ u32 taskbar; /* task table base address */
+ u32 currPtr;
+ u32 endPtr;
+ u32 varTablePtr;
+ u16 dma_rsvd0;
+ u16 ptdControl; /* ptd control */
+ u32 intPending; /* interrupt pending */
+ u32 intMask; /* interrupt mask */
+ u16 taskControl[16]; /* task control */
+ u8 priority[32]; /* priority */
+ u32 initiatorMux; /* initiator mux control */
+ u32 taskSize0; /* task size control 0. */
+ u32 taskSize1; /* task size control 1. */
+ u32 dma_rsvd1; /* reserved */
+ u32 dma_rsvd2; /* reserved */
+ u32 debugComp1; /* debug comparator 1 */
+ u32 debugComp2; /* debug comparator 2 */
+ u32 debugControl; /* debug control */
+ u32 debugStatus; /* debug status */
+ u32 ptdDebug; /* priority task decode debug */
+ u32 dma_rsvd3[31]; /* reserved */
+};
+typedef volatile struct dmaRegs_s dmaRegs;
+
+#endif
+
+/* PTD contrl reg bits */
+#define PTD_CTL_TSK_PRI 0x8000
+#define PTD_CTL_COMM_PREFETCH 0x0001
+
+/* Task Control reg bits and field masks */
+#define TASK_CTL_EN 0x8000
+#define TASK_CTL_VALID 0x4000
+#define TASK_CTL_ALWAYS 0x2000
+#define TASK_CTL_INIT_MASK 0x1f00
+#define TASK_CTL_ASTRT 0x0080
+#define TASK_CTL_HIPRITSKEN 0x0040
+#define TASK_CTL_HLDINITNUM 0x0020
+#define TASK_CTL_ASTSKNUM_MASK 0x000f
+
+/* Priority reg bits and field masks */
+#define PRIORITY_HLD 0x80
+#define PRIORITY_PRI_MASK 0x07
+
+/* Debug Control reg bits and field masks */
+#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000
+#define DBG_CTL_AUTO_ARM 0x00008000
+#define DBG_CTL_BREAK 0x00004000
+#define DBG_CTL_COMP1_TYP_MASK 0x00003800
+#define DBG_CTL_COMP2_TYP_MASK 0x00000070
+#define DBG_CTL_EXT_BREAK 0x00000004
+#define DBG_CTL_INT_BREAK 0x00000002
+
+/*
+ * PTD Debug reg selector addresses
+ * This reg must be written with a value to show the contents of
+ * one of the desired internal register.
+ */
+#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */
+#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and
+ have initiators asserted */
+
+/* General return values */
+#define MCD_OK 0
+#define MCD_ERROR -1
+#define MCD_TABLE_UNALIGNED -2
+#define MCD_CHANNEL_INVALID -3
+
+/* MCD_initDma input flags */
+#define MCD_RELOC_TASKS 0x00000001
+#define MCD_NO_RELOC_TASKS 0x00000000
+#define MCD_COMM_PREFETCH_EN 0x00000002 /* MCF547x/548x ONLY */
+
+/*
+ * MCD_dmaStatus Status Values for each channel:
+ * MCD_NO_DMA - No DMA has been requested since reset
+ * MCD_IDLE - DMA active, but the initiator is currently inactive
+ * MCD_RUNNING - DMA active, and the initiator is currently active
+ * MCD_PAUSED - DMA active but it is currently paused
+ * MCD_HALTED - the most recent DMA has been killed with MCD_killTask()
+ * MCD_DONE - the most recent DMA has completed
+ */
+#define MCD_NO_DMA 1
+#define MCD_IDLE 2
+#define MCD_RUNNING 3
+#define MCD_PAUSED 4
+#define MCD_HALTED 5
+#define MCD_DONE 6
+
+/* MCD_startDma parameter defines */
+
+/* Constants for the funcDesc parameter */
+/*
+ * MCD_NO_BYTE_SWAP - to disable byte swapping
+ * MCD_BYTE_REVERSE - to reverse the bytes of each u32 of the DMAed data
+ * MCD_U16_REVERSE - to reverse the 16-bit halves of each 32-bit data
+ * value being DMAed
+ * MCD_U16_BYTE_REVERSE - to reverse the byte halves of each 16-bit half of
+ * each 32-bit data value DMAed
+ * MCD_NO_BIT_REV - do not reverse the bits of each byte DMAed
+ * MCD_BIT_REV - reverse the bits of each byte DMAed
+ * MCD_CRC16 - to perform CRC-16 on DMAed data
+ * MCD_CRCCCITT - to perform CRC-CCITT on DMAed data
+ * MCD_CRC32 - to perform CRC-32 on DMAed data
+ * MCD_CSUMINET - to perform internet checksums on DMAed data
+ * MCD_NO_CSUM - to perform no checksumming
+ */
+#define MCD_NO_BYTE_SWAP 0x00045670
+#define MCD_BYTE_REVERSE 0x00076540
+#define MCD_U16_REVERSE 0x00067450
+#define MCD_U16_BYTE_REVERSE 0x00054760
+#define MCD_NO_BIT_REV 0x00000000
+#define MCD_BIT_REV 0x00088880
+/* CRCing: */
+#define MCD_CRC16 0xc0100000
+#define MCD_CRCCCITT 0xc0200000
+#define MCD_CRC32 0xc0300000
+#define MCD_CSUMINET 0xc0400000
+#define MCD_NO_CSUM 0xa0000000
+
+#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | \
+ MCD_NO_CSUM)
+#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
+
+/* Constants for the flags parameter */
+#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */
+#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */
+#define MCD_TT_FLAGS_SP 0x00000004 /* MCF547x/548x ONLY */
+#define MCD_TT_FLAGS_MASK 0x000000ff
+#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
+
+#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */
+#define MCD_CHAIN_DMA /* TBD */
+#define MCD_EU_DMA /* TBD */
+#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */
+#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */
+
+/* these flags are valid for MCD_startDma and the chained buffer descriptors */
+/*
+ * MCD_BUF_READY - indicates that this buf is now under the DMA's ctrl
+ * MCD_WRAP - to tell the FEC Dmas to wrap to the first BD
+ * MCD_INTERRUPT - to generate an interrupt after completion of the DMA
+ * MCD_END_FRAME - tell the DMA to end the frame when transferring
+ * last byte of data in buffer
+ * MCD_CRC_RESTART - to empty out the accumulated checksum prior to
+ * performing the DMA
+ */
+#define MCD_BUF_READY 0x80000000
+#define MCD_WRAP 0x20000000
+#define MCD_INTERRUPT 0x10000000
+#define MCD_END_FRAME 0x08000000
+#define MCD_CRC_RESTART 0x40000000
+
+/* Defines for the FEC buffer descriptor control/status word*/
+#define MCD_FEC_BUF_READY 0x8000
+#define MCD_FEC_WRAP 0x2000
+#define MCD_FEC_INTERRUPT 0x1000
+#define MCD_FEC_END_FRAME 0x0800
+
+/* Defines for general intuitiveness */
+
+#define MCD_TRUE 1
+#define MCD_FALSE 0
+
+/* Three different cases for destination and source. */
+#define MINUS1 -1
+#define ZERO 0
+#define PLUS1 1
+
+#ifndef DEFINESONLY
+
+/* Task Table Entry struct*/
+typedef struct {
+ u32 TDTstart; /* task descriptor table start */
+ u32 TDTend; /* task descriptor table end */
+ u32 varTab; /* variable table start */
+ u32 FDTandFlags; /* function descriptor table start & flags */
+ volatile u32 descAddrAndStatus;
+ volatile u32 modifiedVarTab;
+ u32 contextSaveSpace; /* context save space start */
+ u32 literalBases;
+} TaskTableEntry;
+
+/* Chained buffer descriptor:
+ * flags - flags describing the DMA
+ * csumResult - checksum performed since last checksum reset
+ * srcAddr - the address to move data from
+ * destAddr - the address to move data to
+ * lastDestAddr - the last address written to
+ * dmaSize - the no of bytes to xfer independent of the xfer sz
+ * next - next buffer descriptor in chain
+ * info - private info about this descriptor; DMA does not affect it
+ */
+typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
+struct MCD_bufDesc_struct {
+ u32 flags;
+ u32 csumResult;
+ s8 *srcAddr;
+ s8 *destAddr;
+ s8 *lastDestAddr;
+ u32 dmaSize;
+ MCD_bufDesc *next;
+ u32 info;
+};
+
+/* Progress Query struct:
+ * lastSrcAddr - the most-recent or last, post-increment source address
+ * lastDestAddr - the most-recent or last, post-increment destination address
+ * dmaSize - the amount of data transferred for the current buffer
+ * currBufDesc - pointer to the current buffer descriptor being DMAed
+ */
+
+typedef volatile struct MCD_XferProg_struct {
+ s8 *lastSrcAddr;
+ s8 *lastDestAddr;
+ u32 dmaSize;
+ MCD_bufDesc *currBufDesc;
+} MCD_XferProg;
+
+/* FEC buffer descriptor */
+typedef volatile struct MCD_bufDescFec_struct {
+ u16 statCtrl;
+ u16 length;
+ u32 dataPointer;
+} MCD_bufDescFec;
+
+/*************************************************************************/
+/* API function Prototypes - see MCD_dmaApi.c for further notes */
+
+/* MCD_startDma starts a particular kind of DMA:
+ * srcAddr - the channel on which to run the DMA
+ * srcIncr - the address to move data from, or buffer-descriptor address
+ * destAddr - the amount to increment the source address per transfer
+ * destIncr - the address to move data to
+ * dmaSize - the amount to increment the destination address per transfer
+ * xferSize - the number bytes in of each data movement (1, 2, or 4)
+ * initiator - what device initiates the DMA
+ * priority - priority of the DMA
+ * flags - flags describing the DMA
+ * funcDesc - description of byte swapping, bit swapping, and CRC actions
+ */
+int MCD_startDma(int channel, s8 * srcAddr, s16 srcIncr, s8 * destAddr,
+ s16 destIncr, u32 dmaSize, u32 xferSize, u32 initiator,
+ int priority, u32 flags, u32 funcDesc);
+
+/*
+ * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA
+ * registers, relocating and creating the appropriate task structures, and
+ * setting up some global settings
+ */
+int MCD_initDma(dmaRegs * sDmaBarAddr, void *taskTableDest, u32 flags);
+
+/* MCD_dmaStatus() returns the status of the DMA on the requested channel. */
+int MCD_dmaStatus(int channel);
+
+/* MCD_XferProgrQuery() returns progress of DMA on requested channel */
+int MCD_XferProgrQuery(int channel, MCD_XferProg * progRep);
+
+/*
+ * MCD_killDma() halts the DMA on the requested channel, without any
+ * intention of resuming the DMA.
+ */
+int MCD_killDma(int channel);
+
+/*
+ * MCD_continDma() continues a DMA which as stopped due to encountering an
+ * unready buffer descriptor.
+ */
+int MCD_continDma(int channel);
+
+/*
+ * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
+ * running on that channel).
+ */
+int MCD_pauseDma(int channel);
+
+/*
+ * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
+ * running on that channel).
+ */
+int MCD_resumeDma(int channel);
+
+/* MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA */
+int MCD_csumQuery(int channel, u32 * csum);
+
+/*
+ * MCD_getCodeSize provides the packed size required by the microcoded task
+ * and structures.
+ */
+int MCD_getCodeSize(void);
+
+/*
+ * MCD_getVersion provides a pointer to a version string and returns a
+ * version number.
+ */
+int MCD_getVersion(char **longVersion);
+
+/* macro for setting a location in the variable table */
+#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value
+/* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
+ so I'm avoiding surrounding it with "do {} while(0)" */
+
+#endif /* DEFINESONLY */
+
+#endif /* _MCD_API_H */
diff --git a/include/MCD_progCheck.h b/include/MCD_progCheck.h
new file mode 100644
index 0000000..55f7574
--- /dev/null
+++ b/include/MCD_progCheck.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ /* This file is autogenerated. Do not change */
+#define CURRBD 4
+#define DCOUNT 6
+#define DESTPTR 5
+#define SRCPTR 7
diff --git a/include/MCD_tasksInit.h b/include/MCD_tasksInit.h
new file mode 100644
index 0000000..684d5aa
--- /dev/null
+++ b/include/MCD_tasksInit.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MCD_TSK_INIT_H
+#define MCD_TSK_INIT_H 1
+
+/*
+ * Do not edit!
+ */
+
+/* Task 0 */
+void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr,
+ int xferSize, short xferSizeIncr, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel);
+
+/* Task 1 */
+void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr,
+ short destIncr, int dmaSize, short xferSizeIncr,
+ int flags, int *currBD, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel);
+
+/* Task 2 */
+void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr,
+ int xferSize, short xferSizeIncr, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel);
+
+/* Task 3 */
+void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr,
+ short destIncr, int dmaSize, short xferSizeIncr,
+ int flags, int *currBD, int *cSave,
+ volatile TaskTableEntry * taskTable, int channel);
+
+/* Task 4 */
+void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr,
+ volatile TaskTableEntry * taskTable, int channel);
+
+/* Task 5 */
+void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr,
+ volatile TaskTableEntry * taskTable, int channel);
+
+#endif /* MCD_TSK_INIT_H */
diff --git a/include/asm-m68k/coldfire/crossbar.h b/include/asm-m68k/coldfire/crossbar.h
new file mode 100644
index 0000000..a9c724c
--- /dev/null
+++ b/include/asm-m68k/coldfire/crossbar.h
@@ -0,0 +1,79 @@
+/*
+ * Cross Bar Switch Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CROSSBAR_H__
+#define __CROSSBAR_H__
+
+/*********************************************************************
+* Cross-bar switch (XBS)
+*********************************************************************/
+typedef struct xbs {
+ u32 prs1; /* 0x100 Priority Register Slave 1 */
+ u32 res1[3]; /* 0x104 - 0F */
+ u32 crs1; /* 0x110 Control Register Slave 1 */
+ u32 res2[187]; /* 0x114 - 0x3FF */
+
+ u32 prs4; /* 0x400 Priority Register Slave 4 */
+ u32 res3[3]; /* 0x404 - 0F */
+ u32 crs4; /* 0x410 Control Register Slave 4 */
+ u32 res4[123]; /* 0x414 - 0x5FF */
+
+ u32 prs6; /* 0x600 Priority Register Slave 6 */
+ u32 res5[3]; /* 0x604 - 0F */
+ u32 crs6; /* 0x610 Control Register Slave 6 */
+ u32 res6[59]; /* 0x614 - 0x6FF */
+
+ u32 prs7; /* 0x700 Priority Register Slave 7 */
+ u32 res7[3]; /* 0x704 - 0F */
+ u32 crs7; /* 0x710 Control Register Slave 7 */
+} xbs_t;
+
+/* Bit definitions and macros for PRS group */
+#define XBS_PRS_M0(x) (((x)&0x00000007)) /* Core */
+#define XBS_PRS_M1(x) (((x)&0x00000007)<<4) /* eDMA */
+#define XBS_PRS_M2(x) (((x)&0x00000007)<<8) /* FEC0 */
+#define XBS_PRS_M3(x) (((x)&0x00000007)<<12) /* FEC1 */
+#define XBS_PRS_M5(x) (((x)&0x00000007)<<20) /* PCI controller */
+#define XBS_PRS_M6(x) (((x)&0x00000007)<<24) /* USB OTG */
+#define XBS_PRS_M7(x) (((x)&0x00000007)<<28) /* Serial Boot */
+
+/* Bit definitions and macros for CRS group */
+#define XBS_CRS_PARK(x) (((x)&0x00000007)) /* Master parking ctrl */
+#define XBS_CRS_PCTL(x) (((x)&0x00000003)<<4) /* Parking mode ctrl */
+#define XBS_CRS_ARB (0x00000100) /* Arbitration Mode */
+#define XBS_CRS_RO (0x80000000) /* Read Only */
+
+#define XBS_CRS_PCTL_PARK_FIELD (0)
+#define XBS_CRS_PCTL_PARK_ON_LAST (1)
+#define XBS_CRS_PCTL_PARK_NONE (2)
+#define XBS_CRS_PCTL_PARK_CORE (0)
+#define XBS_CRS_PCTL_PARK_EDMA (1)
+#define XBS_CRS_PCTL_PARK_FEC0 (2)
+#define XBS_CRS_PCTL_PARK_FEC1 (3)
+#define XBS_CRS_PCTL_PARK_PCI (5)
+#define XBS_CRS_PCTL_PARK_USB (6)
+#define XBS_CRS_PCTL_PARK_SBF (7)
+
+#endif /* __CROSSBAR_H__ */
diff --git a/include/asm-m68k/coldfire/dspi.h b/include/asm-m68k/coldfire/dspi.h
new file mode 100644
index 0000000..3c579d3
--- /dev/null
+++ b/include/asm-m68k/coldfire/dspi.h
@@ -0,0 +1,156 @@
+/*
+ * MCF5227x Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __DSPI_H__
+#define __DSPI_H__
+
+/*********************************************************************
+* DMA Serial Peripheral Interface (DSPI)
+*********************************************************************/
+
+typedef struct dspi {
+ u32 dmcr;
+ u8 resv0[0x4];
+ u32 dtcr;
+ u32 dctar0;
+ u32 dctar1;
+ u32 dctar2;
+ u32 dctar3;
+ u32 dctar4;
+ u32 dctar5;
+ u32 dctar6;
+ u32 dctar7;
+ u32 dsr;
+ u32 dirsr;
+ u32 dtfr;
+ u32 drfr;
+ u32 dtfdr0;
+ u32 dtfdr1;
+ u32 dtfdr2;
+ u32 dtfdr3;
+ u8 resv1[0x30];
+ u32 drfdr0;
+ u32 drfdr1;
+ u32 drfdr2;
+ u32 drfdr3;
+} dspi_t;
+
+/* Bit definitions and macros for DMCR */
+#define DSPI_DMCR_HALT (0x00000001)
+#define DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8)
+#define DSPI_DMCR_CRXF (0x00000400)
+#define DSPI_DMCR_CTXF (0x00000800)
+#define DSPI_DMCR_DRXF (0x00001000)
+#define DSPI_DMCR_DTXF (0x00002000)
+#define DSPI_DMCR_CSIS0 (0x00010000)
+#define DSPI_DMCR_CSIS2 (0x00040000)
+#define DSPI_DMCR_CSIS3 (0x00080000)
+#define DSPI_DMCR_CSIS5 (0x00200000)
+#define DSPI_DMCR_ROOE (0x01000000)
+#define DSPI_DMCR_PCSSE (0x02000000)
+#define DSPI_DMCR_MTFE (0x04000000)
+#define DSPI_DMCR_FRZ (0x08000000)
+#define DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28)
+#define DSPI_DMCR_CSCK (0x40000000)
+#define DSPI_DMCR_MSTR (0x80000000)
+
+/* Bit definitions and macros for DTCR */
+#define DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16)
+
+/* Bit definitions and macros for DCTAR group */
+#define DSPI_DCTAR_BR(x) (((x)&0x0000000F))
+#define DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4)
+#define DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8)
+#define DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12)
+#define DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16)
+#define DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18)
+#define DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20)
+#define DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22)
+#define DSPI_DCTAR_LSBFE (0x01000000)
+#define DSPI_DCTAR_CPHA (0x02000000)
+#define DSPI_DCTAR_CPOL (0x04000000)
+#define DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27)
+#define DSPI_DCTAR_PCSSCK_1CLK (0x00000000)
+#define DSPI_DCTAR_PCSSCK_3CLK (0x00400000)
+#define DSPI_DCTAR_PCSSCK_5CLK (0x00800000)
+#define DSPI_DCTAR_PCSSCK_7CLK (0x00A00000)
+#define DSPI_DCTAR_PASC_1CLK (0x00000000)
+#define DSPI_DCTAR_PASC_3CLK (0x00100000)
+#define DSPI_DCTAR_PASC_5CLK (0x00200000)
+#define DSPI_DCTAR_PASC_7CLK (0x00300000)
+#define DSPI_DCTAR_PDT_1CLK (0x00000000)
+#define DSPI_DCTAR_PDT_3CLK (0x00040000)
+#define DSPI_DCTAR_PDT_5CLK (0x00080000)
+#define DSPI_DCTAR_PDT_7CLK (0x000A0000)
+#define DSPI_DCTAR_PBR_1CLK (0x00000000)
+#define DSPI_DCTAR_PBR_3CLK (0x00010000)
+#define DSPI_DCTAR_PBR_5CLK (0x00020000)
+#define DSPI_DCTAR_PBR_7CLK (0x00030000)
+
+/* Bit definitions and macros for DSR */
+#define DSPI_DSR_RXPTR(x) (((x)&0x0000000F))
+#define DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4)
+#define DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8)
+#define DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12)
+#define DSPI_DSR_RFDF (0x00020000)
+#define DSPI_DSR_RFOF (0x00080000)
+#define DSPI_DSR_TFFF (0x02000000)
+#define DSPI_DSR_TFUF (0x08000000)
+#define DSPI_DSR_EOQF (0x10000000)
+#define DSPI_DSR_TXRXS (0x40000000)
+#define DSPI_DSR_TCF (0x80000000)
+
+/* Bit definitions and macros for DIRSR */
+#define DSPI_DIRSR_RFDFS (0x00010000)
+#define DSPI_DIRSR_RFDFE (0x00020000)
+#define DSPI_DIRSR_RFOFE (0x00080000)
+#define DSPI_DIRSR_TFFFS (0x01000000)
+#define DSPI_DIRSR_TFFFE (0x02000000)
+#define DSPI_DIRSR_TFUFE (0x08000000)
+#define DSPI_DIRSR_EOQFE (0x10000000)
+#define DSPI_DIRSR_TCFE (0x80000000)
+
+/* Bit definitions and macros for DTFR */
+#define DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF))
+#define DSPI_DTFR_CS0 (0x00010000)
+#define DSPI_DTFR_CS2 (0x00040000)
+#define DSPI_DTFR_CS3 (0x00080000)
+#define DSPI_DTFR_CS5 (0x00200000)
+#define DSPI_DTFR_CTCNT (0x04000000)
+#define DSPI_DTFR_EOQ (0x08000000)
+#define DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28)
+#define DSPI_DTFR_CONT (0x80000000)
+
+/* Bit definitions and macros for DRFR */
+#define DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF))
+
+/* Bit definitions and macros for DTFDR group */
+#define DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF))
+#define DSPI_DTFDR_TXCMD(x) (((x)&0x0000FFFF)<<16)
+
+/* Bit definitions and macros for DRFDR group */
+#define DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF))
+
+#endif /* __DSPI_H__ */
diff --git a/include/asm-m68k/coldfire/edma.h b/include/asm-m68k/coldfire/edma.h
new file mode 100644
index 0000000..c88aea6
--- /dev/null
+++ b/include/asm-m68k/coldfire/edma.h
@@ -0,0 +1,177 @@
+/*
+ * EDMA Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __EDMA_H__
+#define __EDMA_H__
+
+/*********************************************************************
+* Enhanced DMA (EDMA)
+*********************************************************************/
+
+/* eDMA module registers */
+typedef struct edma_ctrl {
+ u32 cr; /* 0x00 Control Register */
+ u32 es; /* 0x04 Error Status Register */
+ u16 res1[3]; /* 0x08 - 0x0D */
+ u16 erq; /* 0x0E Enable Request Register */
+ u16 res2[3]; /* 0x10 - 0x15 */
+ u16 eei; /* 0x16 Enable Error Interrupt Request */
+ u8 serq; /* 0x18 Set Enable Request */
+ u8 cerq; /* 0x19 Clear Enable Request */
+ u8 seei; /* 0x1A Set En Error Interrupt Request */
+ u8 ceei; /* 0x1B Clear En Error Interrupt Request */
+ u8 cint; /* 0x1C Clear Interrupt Enable */
+ u8 cerr; /* 0x1D Clear Error */
+ u8 ssrt; /* 0x1E Set START Bit */
+ u8 cdne; /* 0x1F Clear DONE Status Bit */
+ u16 res3[3]; /* 0x20 - 0x25 */
+ u16 intr; /* 0x26 Interrupt Request */
+ u16 res4[3]; /* 0x28 - 0x2D */
+ u16 err; /* 0x2E Error Register */
+ u32 res5[52]; /* 0x30 - 0xFF */
+ u8 dchpri0; /* 0x100 Channel 0 Priority */
+ u8 dchpri1; /* 0x101 Channel 1 Priority */
+ u8 dchpri2; /* 0x102 Channel 2 Priority */
+ u8 dchpri3; /* 0x103 Channel 3 Priority */
+ u8 dchpri4; /* 0x104 Channel 4 Priority */
+ u8 dchpri5; /* 0x105 Channel 5 Priority */
+ u8 dchpri6; /* 0x106 Channel 6 Priority */
+ u8 dchpri7; /* 0x107 Channel 7 Priority */
+ u8 dchpri8; /* 0x108 Channel 8 Priority */
+ u8 dchpri9; /* 0x109 Channel 9 Priority */
+ u8 dchpri10; /* 0x110 Channel 10 Priority */
+ u8 dchpri11; /* 0x111 Channel 11 Priority */
+ u8 dchpri12; /* 0x112 Channel 12 Priority */
+ u8 dchpri13; /* 0x113 Channel 13 Priority */
+ u8 dchpri14; /* 0x114 Channel 14 Priority */
+ u8 dchpri15; /* 0x115 Channel 15 Priority */
+} edma_t;
+
+/* TCD - eDMA*/
+typedef struct tcd_ctrl {
+ u32 saddr; /* 0x00 Source Address */
+ u16 attr; /* 0x04 Transfer Attributes */
+ u16 soff; /* 0x06 Signed Source Address Offset */
+ u32 nbytes; /* 0x08 Minor Byte Count */
+ u32 slast; /* 0x0C Last Source Address Adjustment */
+ u32 daddr; /* 0x10 Destination address */
+ u16 citer; /* 0x14 Cur Minor Loop Link, Major Loop Cnt */
+ u16 doff; /* 0x16 Signed Destination Address Offset */
+ u32 dlast_sga; /* 0x18 Last Dest Adr Adj/Scatter Gather Adr */
+ u16 biter; /* 0x1C Minor Loop Lnk, Major Loop Cnt */
+ u16 csr; /* 0x1E Control and Status */
+} tcd_st;
+
+typedef struct tcd_multiple {
+ tcd_st tcd[16];
+} tcd_t;
+
+/* Bit definitions and macros for EPPAR */
+#define EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
+#define EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4)
+#define EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6)
+#define EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8)
+#define EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10)
+#define EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12)
+#define EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14)
+#define EPORT_EPPAR_LEVEL (0)
+#define EPORT_EPPAR_RISING (1)
+#define EPORT_EPPAR_FALLING (2)
+#define EPORT_EPPAR_BOTH (3)
+#define EPORT_EPPAR_EPPA7_LEVEL (0x0000)
+#define EPORT_EPPAR_EPPA7_RISING (0x4000)
+#define EPORT_EPPAR_EPPA7_FALLING (0x8000)
+#define EPORT_EPPAR_EPPA7_BOTH (0xC000)
+#define EPORT_EPPAR_EPPA6_LEVEL (0x0000)
+#define EPORT_EPPAR_EPPA6_RISING (0x1000)
+#define EPORT_EPPAR_EPPA6_FALLING (0x2000)
+#define EPORT_EPPAR_EPPA6_BOTH (0x3000)
+#define EPORT_EPPAR_EPPA5_LEVEL (0x0000)
+#define EPORT_EPPAR_EPPA5_RISING (0x0400)
+#define EPORT_EPPAR_EPPA5_FALLING (0x0800)
+#define EPORT_EPPAR_EPPA5_BOTH (0x0C00)
+#define EPORT_EPPAR_EPPA4_LEVEL (0x0000)
+#define EPORT_EPPAR_EPPA4_RISING (0x0100)
+#define EPORT_EPPAR_EPPA4_FALLING (0x0200)
+#define EPORT_EPPAR_EPPA4_BOTH (0x0300)
+#define EPORT_EPPAR_EPPA3_LEVEL (0x0000)
+#define EPORT_EPPAR_EPPA3_RISING (0x0040)
+#define EPORT_EPPAR_EPPA3_FALLING (0x0080)
+#define EPORT_EPPAR_EPPA3_BOTH (0x00C0)
+#define EPORT_EPPAR_EPPA2_LEVEL (0x0000)
+#define EPORT_EPPAR_EPPA2_RISING (0x0010)
+#define EPORT_EPPAR_EPPA2_FALLING (0x0020)
+#define EPORT_EPPAR_EPPA2_BOTH (0x0030)
+#define EPORT_EPPAR_EPPA1_LEVEL (0x0000)
+#define EPORT_EPPAR_EPPA1_RISING (0x0004)
+#define EPORT_EPPAR_EPPA1_FALLING (0x0008)
+#define EPORT_EPPAR_EPPA1_BOTH (0x000C)
+
+/* Bit definitions and macros for EPDDR */
+#define EPORT_EPDDR_EPDD1 (0x02)
+#define EPORT_EPDDR_EPDD2 (0x04)
+#define EPORT_EPDDR_EPDD3 (0x08)
+#define EPORT_EPDDR_EPDD4 (0x10)
+#define EPORT_EPDDR_EPDD5 (0x20)
+#define EPORT_EPDDR_EPDD6 (0x40)
+#define EPORT_EPDDR_EPDD7 (0x80)
+
+/* Bit definitions and macros for EPIER */
+#define EPORT_EPIER_EPIE1 (0x02)
+#define EPORT_EPIER_EPIE2 (0x04)
+#define EPORT_EPIER_EPIE3 (0x08)
+#define EPORT_EPIER_EPIE4 (0x10)
+#define EPORT_EPIER_EPIE5 (0x20)
+#define EPORT_EPIER_EPIE6 (0x40)
+#define EPORT_EPIER_EPIE7 (0x80)
+
+/* Bit definitions and macros for EPDR */
+#define EPORT_EPDR_EPD1 (0x02)
+#define EPORT_EPDR_EPD2 (0x04)
+#define EPORT_EPDR_EPD3 (0x08)
+#define EPORT_EPDR_EPD4 (0x10)
+#define EPORT_EPDR_EPD5 (0x20)
+#define EPORT_EPDR_EPD6 (0x40)
+#define EPORT_EPDR_EPD7 (0x80)
+
+/* Bit definitions and macros for EPPDR */
+#define EPORT_EPPDR_EPPD1 (0x02)
+#define EPORT_EPPDR_EPPD2 (0x04)
+#define EPORT_EPPDR_EPPD3 (0x08)
+#define EPORT_EPPDR_EPPD4 (0x10)
+#define EPORT_EPPDR_EPPD5 (0x20)
+#define EPORT_EPPDR_EPPD6 (0x40)
+#define EPORT_EPPDR_EPPD7 (0x80)
+
+/* Bit definitions and macros for EPFR */
+#define EPORT_EPFR_EPF1 (0x02)
+#define EPORT_EPFR_EPF2 (0x04)
+#define EPORT_EPFR_EPF3 (0x08)
+#define EPORT_EPFR_EPF4 (0x10)
+#define EPORT_EPFR_EPF5 (0x20)
+#define EPORT_EPFR_EPF6 (0x40)
+#define EPORT_EPFR_EPF7 (0x80)
+
+#endif /* __EDMA_H__ */
diff --git a/include/asm-m68k/coldfire/flexbus.h b/include/asm-m68k/coldfire/flexbus.h
new file mode 100644
index 0000000..1d902c0
--- /dev/null
+++ b/include/asm-m68k/coldfire/flexbus.h
@@ -0,0 +1,98 @@
+/*
+ * FlexBus Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FLEXBUS_H
+#define __FLEXBUS_H
+
+/*********************************************************************
+* FlexBus Chip Selects (FBCS)
+*********************************************************************/
+
+typedef struct fbcs {
+ u32 csar0; /* Chip-select Address Register */
+ u32 csmr0; /* Chip-select Mask Register */
+ u32 cscr0; /* Chip-select Control Register */
+ u32 csar1; /* Chip-select Address Register */
+ u32 csmr1; /* Chip-select Mask Register */
+ u32 cscr1; /* Chip-select Control Register */
+ u32 csar2; /* Chip-select Address Register */
+ u32 csmr2; /* Chip-select Mask Register */
+ u32 cscr2; /* Chip-select Control Register */
+ u32 csar3; /* Chip-select Address Register */
+ u32 csmr3; /* Chip-select Mask Register */
+ u32 cscr3; /* Chip-select Control Register */
+ u32 csar4; /* Chip-select Address Register */
+ u32 csmr4; /* Chip-select Mask Register */
+ u32 cscr4; /* Chip-select Control Register */
+ u32 csar5; /* Chip-select Address Register */
+ u32 csmr5; /* Chip-select Mask Register */
+ u32 cscr5; /* Chip-select Control Register */
+} fbcs_t;
+
+/* Bit definitions and macros for CSAR group */
+#define FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
+
+/* Bit definitions and macros for CSMR group */
+#define FBCS_CSMR_V (0x00000001) /* Valid bit */
+#define FBCS_CSMR_WP (0x00000100) /* Write protect */
+#define FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
+#define FBCS_CSMR_BAM_4G (0xFFFF0000)
+#define FBCS_CSMR_BAM_2G (0x7FFF0000)
+#define FBCS_CSMR_BAM_1G (0x3FFF0000)
+#define FBCS_CSMR_BAM_1024M (0x3FFF0000)
+#define FBCS_CSMR_BAM_512M (0x1FFF0000)
+#define FBCS_CSMR_BAM_256M (0x0FFF0000)
+#define FBCS_CSMR_BAM_128M (0x07FF0000)
+#define FBCS_CSMR_BAM_64M (0x03FF0000)
+#define FBCS_CSMR_BAM_32M (0x01FF0000)
+#define FBCS_CSMR_BAM_16M (0x00FF0000)
+#define FBCS_CSMR_BAM_8M (0x007F0000)
+#define FBCS_CSMR_BAM_4M (0x003F0000)
+#define FBCS_CSMR_BAM_2M (0x001F0000)
+#define FBCS_CSMR_BAM_1M (0x000F0000)
+#define FBCS_CSMR_BAM_1024K (0x000F0000)
+#define FBCS_CSMR_BAM_512K (0x00070000)
+#define FBCS_CSMR_BAM_256K (0x00030000)
+#define FBCS_CSMR_BAM_128K (0x00010000)
+#define FBCS_CSMR_BAM_64K (0x00000000)
+
+/* Bit definitions and macros for CSCR group */
+#define FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */
+#define FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */
+#define FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */
+#define FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */
+#define FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */
+#define FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
+#define FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */
+#define FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */
+#define FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
+#define FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */
+#define FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */
+
+#define FBCS_CSCR_PS_8 (0x00000040)
+#define FBCS_CSCR_PS_16 (0x00000080)
+#define FBCS_CSCR_PS_32 (0x00000000)
+
+#endif /* __FLEXBUS_H */
diff --git a/include/asm-m68k/coldfire/lcd.h b/include/asm-m68k/coldfire/lcd.h
new file mode 100644
index 0000000..66b95b3
--- /dev/null
+++ b/include/asm-m68k/coldfire/lcd.h
@@ -0,0 +1,213 @@
+/*
+ * LCD controller Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LCDC_H__
+#define __LCDC_H__
+
+/* LCD module registers */
+typedef struct lcd_ctrl {
+ u32 ssar; /* 0x00 Screen Start Address Register */
+ u32 sr; /* 0x04 LCD Size Register */
+ u32 vpw; /* 0x08 Virtual Page Width Register */
+ u32 cpr; /* 0x0C Cursor Position Register */
+ u32 cwhb; /* 0x10 Cursor Width Height and Blink Register */
+ u32 ccmr; /* 0x14 Color Cursor Mapping Register */
+ u32 pcr; /* 0x18 Panel Configuration Register */
+ u32 hcr; /* 0x1C Horizontal Configuration Register */
+ u32 vcr; /* 0x20 Vertical Configuration Register */
+ u32 por; /* 0x24 Panning Offset Register */
+ u32 scr; /* 0x28 Sharp Configuration Register */
+ u32 pccr; /* 0x2C PWM Contrast Control Register */
+ u32 dcr; /* 0x30 DMA Control Register */
+ u32 rmcr; /* 0x34 Refresh Mode Control Register */
+ u32 icr; /* 0x38 Refresh Mode Control Register */
+ u32 ier; /* 0x3C Interrupt Enable Register */
+ u32 isr; /* 0x40 Interrupt Status Register */
+ u32 res[4];
+ u32 gwsar; /* 0x50 Graphic Window Start Address Register */
+ u32 gwsr; /* 0x54 Graphic Window Size Register */
+ u32 gwvpw; /* 0x58 Graphic Window Virtual Page Width Register */
+ u32 gwpor; /* 0x5C Graphic Window Panning Offset Register */
+ u32 gwpr; /* 0x60 Graphic Window Position Register */
+ u32 gwcr; /* 0x64 Graphic Window Control Register */
+ u32 gwdcr; /* 0x68 Graphic Window DMA Control Register */
+} lcd_t;
+
+typedef struct lcdbg_ctrl {
+ u32 bglut[255];
+} lcdbg_t;
+
+typedef struct lcdgw_ctrl {
+ u32 gwlut[255];
+} lcdgw_t;
+
+/* Bit definitions and macros for LCDC_LSSAR */
+#define LCDC_SSAR_SSA(x) (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for LCDC_LSR */
+#define LCDC_SR_XMAX(x) (((x)&0x0000003F)<<20)
+#define LCDC_SR_YMAX(x) ((x)&0x000003FF)
+
+/* Bit definitions and macros for LCDC_LVPWR */
+#define LCDC_VPWR_VPW(x) (((x)&0x000003FF)
+
+/* Bit definitions and macros for LCDC_LCPR */
+#define LCDC_CPR_CC(x) (((x)&0x00000003)<<30)
+#define LCDC_CPR_CC_AND (0xC0000000)
+#define LCDC_CPR_CC_XOR (0x80000000)
+#define LCDC_CPR_CC_OR (0x40000000)
+#define LCDC_CPR_CC_TRANSPARENT (0x00000000)
+#define LCDC_CPR_OP (0x10000000)
+#define LCDC_CPR_CXP(x) (((x)&0x000003FF)<<16)
+#define LCDC_CPR_CYP(x) ((x)&0x000003FF)
+
+/* Bit definitions and macros for LCDC_LCWHBR */
+#define LCDC_CWHBR_BK_EN (0x80000000)
+#define LCDC_CWHBR_CW(x) (((x)&0x0000001F)<<24)
+#define LCDC_CWHBR_CH(x) (((x)&0x0000001F)<<16)
+#define LCDC_CWHBR_BD(x) ((x)&0x000000FF)
+
+/* Bit definitions and macros for LCDC_LCCMR */
+#define LCDC_CCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12)
+#define LCDC_CCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6)
+#define LCDC_CCMR_CUR_COL_B(x) ((x)&0x0000003F)
+
+/* Bit definitions and macros for LCDC_LPCR */
+#define LCDC_PCR_PANEL_TYPE(x) (((x)&0x00000003)<<30)
+#define LCDC_PCR_MODE_TFT (0xC0000000)
+#define LCDC_PCR_MODE_CSTN (0x40000000)
+#define LCDC_PCR_MODE_MONOCHROME (0x00000000)
+#define LCDC_PCR_TFT (0x80000000)
+#define LCDC_PCR_COLOR (0x40000000)
+#define LCDC_PCR_PBSIZ(x) (((x)&0x00000003)<<28)
+#define LCDC_PCR_PBSIZ_8 (0x30000000)
+#define LCDC_PCR_PBSIZ_4 (0x20000000)
+#define LCDC_PCR_PBSIZ_2 (0x10000000)
+#define LCDC_PCR_PBSIZ_1 (0x00000000)
+#define LCDC_PCR_BPIX(x) (((x)&0x00000007)<<25)
+#define LCDC_PCR_BPIX_18bpp (0x0C000000)
+#define LCDC_PCR_BPIX_16bpp (0x0A000000)
+#define LCDC_PCR_BPIX_12bpp (0x08000000)
+#define LCDC_PCR_BPIX_8bpp (0x06000000)
+#define LCDC_PCR_BPIX_4bpp (0x04000000)
+#define LCDC_PCR_BPIX_2bpp (0x02000000)
+#define LCDC_PCR_BPIX_1bpp (0x00000000)
+#define LCDC_PCR_PIXPOL (0x01000000)
+#define LCDC_PCR_FLM (0x00800000)
+#define LCDC_PCR_LPPOL (0x00400000)
+#define LCDC_PCR_CLKPOL (0x00200000)
+#define LCDC_PCR_OEPOL (0x00100000)
+#define LCDC_PCR_SCLKIDLE (0x00080000)
+#define LCDC_PCR_ENDSEL (0x00040000)
+#define LCDC_PCR_SWAP_SEL (0x00020000)
+#define LCDC_PCR_REV_VS (0x00010000)
+#define LCDC_PCR_ACDSEL (0x00008000)
+#define LCDC_PCR_ACD(x) (((x)&0x0000007F)<<8)
+#define LCDC_PCR_SCLKSEL (0x00000080)
+#define LCDC_PCR_SHARP (0x00000040)
+#define LCDC_PCR_PCD(x) ((x)&0x0000003F)
+
+/* Bit definitions and macros for LCDC_LHCR */
+#define LCDC_HCR_H_WIDTH(x) (((x)&0x0000003F)<<26)
+#define LCDC_HCR_H_WAIT_1(x) (((x)&0x000000FF)<<8)
+#define LCDC_HCR_H_WAIT_2(x) ((x)&0x000000FF)
+
+/* Bit definitions and macros for LCDC_LVCR */
+#define LCDC_VCR_V_WIDTH(x) (((x)&0x0000003F)<<26)
+#define LCDC_VCR_V_WAIT_1(x) (((x)&0x000000FF)<<8)
+#define LCDC_VCR_V_WAIT_2(x) ((x)&0x000000FF)
+
+/* Bit definitions and macros for LCDC_SCR */
+#define LCDC_SCR_PS_R_DELAY(x) (((x)&0x0000003F) << 26)
+#define LCDC_SCR_CLS_R_DELAY(x) (((x)&0x000000FF) << 16)
+#define LCDC_SCR_RTG_DELAY(x) (((x)&0x0000000F) << 8)
+#define LCDC_SCR_GRAY2(x) (((x)&0x0000000F) << 4)
+#define LCDC_SCR_GRAY1(x) ((x)&&0x0000000F)
+
+/* Bit definitions and macros for LCDC_LPCCR */
+#define LCDC_PCCR_CLS_HI_WID(x) (((x)&0x000001FF)<<16)
+#define LCDC_PCCR_LDMSK (0x00008000)
+#define LCDC_PCCR_SCR(x) (((x)&0x00000003)<<9)
+#define LCDC_PCCR_SCR_LCDCLK (0x00000400)
+#define LCDC_PCCR_SCR_PIXCLK (0x00000200)
+#define LCDC_PCCR_SCR_LNPULSE (0x00000000)
+#define LCDC_PCCR_CC_EN (0x00000100)
+#define LCDC_PCCR_PW(x) ((x)&0x000000FF)
+
+/* Bit definitions and macros for LCDC_LDCR */
+#define LCDC_DCR_BURST (0x80000000)
+#define LCDC_DCR_HM(x) (((x)&0x0000001F)<<16)
+#define LCDC_DCR_TM(x) ((x)&0x0000001F)
+
+/* Bit definitions and macros for LCDC_LRMCR */
+#define LCDC_RMCR_SEL_REF (0x00000001)
+
+/* Bit definitions and macros for LCDC_LICR */
+#define LCDC_ICR_GW_INT_CON (0x00000010)
+#define LCDC_ICR_INTSYN (0x00000004)
+#define LCDC_ICR_INTCON (0x00000001)
+
+/* Bit definitions and macros for LCDC_LIER */
+#define LCDC_IER_GW_UDR (0x00000080)
+#define LCDC_IER_GW_ERR (0x00000040)
+#define LCDC_IER_GW_EOF (0x00000020)
+#define LCDC_IER_GW_BOF (0x00000010)
+#define LCDC_IER_UDR (0x00000008)
+#define LCDC_IER_ERR (0x00000004)
+#define LCDC_IER_EOF (0x00000002)
+#define LCDC_IER_BOF (0x00000001)
+
+/* Bit definitions and macros for LCDC_LGWSAR */
+#define LCDC_GWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for LCDC_LGWSR */
+#define LCDC_GWSR_GWW(x) (((x)&0x0000003F)<<20)
+#define LCDC_GWSR_GWH(x) ((x)&0x000003FF)
+
+/* Bit definitions and macros for LCDC_LGWVPWR */
+#define LCDC_GWVPWR_GWVPW(x) ((x)&0x000003FF)
+
+/* Bit definitions and macros for LCDC_LGWPOR */
+#define LCDC_GWPOR_GWPO(x) ((x)&0x0000001F)
+
+/* Bit definitions and macros for LCDC_LGWPR */
+#define LCDC_GWPR_GWXP(x) (((x)&0x000003FF)<<16)
+#define LCDC_GWPR_GWYP(x) ((x)&0x000003FF)
+
+/* Bit definitions and macros for LCDC_LGWCR */
+#define LCDC_GWCR_GWAV(x) (((x)&0x000000FF)<<24)
+#define LCDC_GWCR_GWCKE (0x00800000)
+#define LCDC_LGWCR_GWE (0x00400000)
+#define LCDC_LGWCR_GW_RVS (0x00200000)
+#define LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12)
+#define LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6)
+#define LCDC_LGWCR_GWCKB(x) ((x)&0x0000003F)
+
+/* Bit definitions and macros for LCDC_LGWDCR */
+#define LCDC_LGWDCR_GWBT (0x80000000)
+#define LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16)
+#define LCDC_LGWDCR_GWTM(x) ((x)&0x0000001F)
+
+#endif /* __LCDC_H__ */
diff --git a/include/asm-m68k/coldfire/ssi.h b/include/asm-m68k/coldfire/ssi.h
new file mode 100644
index 0000000..105c475
--- /dev/null
+++ b/include/asm-m68k/coldfire/ssi.h
@@ -0,0 +1,175 @@
+/*
+ * SSI Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SSI_H__
+#define __SSI_H__
+
+/*********************************************************************
+* Synchronous Serial Interface (SSI)
+*********************************************************************/
+
+typedef struct ssi {
+ u32 tx0;
+ u32 tx1;
+ u32 rx0;
+ u32 rx1;
+ u32 cr;
+ u32 isr;
+ u32 ier;
+ u32 tcr;
+ u32 rcr;
+ u32 ccr;
+ u8 resv0[0x4];
+ u32 fcsr;
+ u8 resv1[0x8];
+ u32 acr;
+ u32 acadd;
+ u32 acdat;
+ u32 atag;
+ u32 tmask;
+ u32 rmask;
+} ssi_t;
+
+/*********************************************************************
+* Synchronous Serial Interface (SSI)
+*********************************************************************/
+
+/* Bit definitions and macros for SSI_CR */
+#define SSI_CR_CIS (0x00000200)
+#define SSI_CR_TCH (0x00000100)
+#define SSI_CR_MCE (0x00000080)
+#define SSI_CR_I2S_SLAVE (0x00000040)
+#define SSI_CR_I2S_MASTER (0x00000020)
+#define SSI_CR_I2S_NORMAL (0x00000000)
+#define SSI_CR_SYN (0x00000010)
+#define SSI_CR_NET (0x00000008)
+#define SSI_CR_RE (0x00000004)
+#define SSI_CR_TE (0x00000002)
+#define SSI_CR_SSI_EN (0x00000001)
+
+/* Bit definitions and macros for SSI_ISR */
+#define SSI_ISR_CMDAU (0x00040000)
+#define SSI_ISR_CMDDU (0x00020000)
+#define SSI_ISR_RXT (0x00010000)
+#define SSI_ISR_RDR1 (0x00008000)
+#define SSI_ISR_RDR0 (0x00004000)
+#define SSI_ISR_TDE1 (0x00002000)
+#define SSI_ISR_TDE0 (0x00001000)
+#define SSI_ISR_ROE1 (0x00000800)
+#define SSI_ISR_ROE0 (0x00000400)
+#define SSI_ISR_TUE1 (0x00000200)
+#define SSI_ISR_TUE0 (0x00000100)
+#define SSI_ISR_TFS (0x00000080)
+#define SSI_ISR_RFS (0x00000040)
+#define SSI_ISR_TLS (0x00000020)
+#define SSI_ISR_RLS (0x00000010)
+#define SSI_ISR_RFF1 (0x00000008)
+#define SSI_ISR_RFF0 (0x00000004)
+#define SSI_ISR_TFE1 (0x00000002)
+#define SSI_ISR_TFE0 (0x00000001)
+
+/* Bit definitions and macros for SSI_IER */
+#define SSI_IER_RDMAE (0x00400000)
+#define SSI_IER_RIE (0x00200000)
+#define SSI_IER_TDMAE (0x00100000)
+#define SSI_IER_TIE (0x00080000)
+#define SSI_IER_CMDAU (0x00040000)
+#define SSI_IER_CMDU (0x00020000)
+#define SSI_IER_RXT (0x00010000)
+#define SSI_IER_RDR1 (0x00008000)
+#define SSI_IER_RDR0 (0x00004000)
+#define SSI_IER_TDE1 (0x00002000)
+#define SSI_IER_TDE0 (0x00001000)
+#define SSI_IER_ROE1 (0x00000800)
+#define SSI_IER_ROE0 (0x00000400)
+#define SSI_IER_TUE1 (0x00000200)
+#define SSI_IER_TUE0 (0x00000100)
+#define SSI_IER_TFS (0x00000080)
+#define SSI_IER_RFS (0x00000040)
+#define SSI_IER_TLS (0x00000020)
+#define SSI_IER_RLS (0x00000010)
+#define SSI_IER_RFF1 (0x00000008)
+#define SSI_IER_RFF0 (0x00000004)
+#define SSI_IER_TFE1 (0x00000002)
+#define SSI_IER_TFE0 (0x00000001)
+
+/* Bit definitions and macros for SSI_TCR */
+#define SSI_TCR_TXBIT0 (0x00000200)
+#define SSI_TCR_TFEN1 (0x00000100)
+#define SSI_TCR_TFEN0 (0x00000080)
+#define SSI_TCR_TFDIR (0x00000040)
+#define SSI_TCR_TXDIR (0x00000020)
+#define SSI_TCR_TSHFD (0x00000010)
+#define SSI_TCR_TSCKP (0x00000008)
+#define SSI_TCR_TFSI (0x00000004)
+#define SSI_TCR_TFSL (0x00000002)
+#define SSI_TCR_TEFS (0x00000001)
+
+/* Bit definitions and macros for SSI_RCR */
+#define SSI_RCR_RXEXT (0x00000400)
+#define SSI_RCR_RXBIT0 (0x00000200)
+#define SSI_RCR_RFEN1 (0x00000100)
+#define SSI_RCR_RFEN0 (0x00000080)
+#define SSI_RCR_RSHFD (0x00000010)
+#define SSI_RCR_RSCKP (0x00000008)
+#define SSI_RCR_RFSI (0x00000004)
+#define SSI_RCR_RFSL (0x00000002)
+#define SSI_RCR_REFS (0x00000001)
+
+/* Bit definitions and macros for SSI_CCR */
+#define SSI_CCR_DIV2 (0x00040000)
+#define SSI_CCR_PSR (0x00020000)
+#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13)
+#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8)
+#define SSI_CCR_PM(x) ((x)&0x000000FF)
+
+/* Bit definitions and macros for SSI_FCSR */
+#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28)
+#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24)
+#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20)
+#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16)
+#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12)
+#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8)
+#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4)
+#define SSI_FCSR_TFWM0(x) ((x)&0x0000000F)
+
+/* Bit definitions and macros for SSI_ACR */
+#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5)
+#define SSI_ACR_WR (0x00000010)
+#define SSI_ACR_RD (0x00000008)
+#define SSI_ACR_TIF (0x00000004)
+#define SSI_ACR_FV (0x00000002)
+#define SSI_ACR_AC97EN (0x00000001)
+
+/* Bit definitions and macros for SSI_ACADD */
+#define SSI_ACADD_SSI_ACADD(x) ((x)&0x0007FFFF)
+
+/* Bit definitions and macros for SSI_ACDAT */
+#define SSI_ACDAT_SSI_ACDAT(x) ((x)&0x0007FFFF)
+
+/* Bit definitions and macros for SSI_ATAG */
+#define SSI_ATAG_DDI_ATAG(x) ((x)&0x0000FFFF)
+
+#endif /* __SSI_H__ */
diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h
index 344c5e1..e639599 100644
--- a/include/asm-m68k/fec.h
+++ b/include/asm-m68k/fec.h
@@ -39,20 +39,20 @@
uint cbd_bufaddr; /* Buffer address in host memory */
} cbd_t;
-#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
+#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
/* Buffer descriptor control/status used by Ethernet receive.
*/
@@ -95,11 +95,8 @@
#define BD_ENET_TX_CSL ((ushort)0x0001)
#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-#ifdef CONFIG_MCFFEC
/*********************************************************************
-*
* Fast Ethernet Controller (FEC)
-*
*********************************************************************/
/* FEC private information */
struct fec_info_s {
@@ -117,8 +114,10 @@
uint txIdx;
char *txbuf;
int initialized;
+ struct fec_info_s *next;
};
+#ifdef CONFIG_MCFFEC
/* Register read/write struct */
typedef struct fec {
#ifdef CONFIG_M5272
@@ -254,90 +253,91 @@
u32 ieee_r_fdxfc;
u32 ieee_r_octets_ok;
} fec_t;
+#endif /* CONFIG_MCFFEC */
/*********************************************************************
* Fast Ethernet Controller (FEC)
*********************************************************************/
/* Bit definitions and macros for FEC_EIR */
-#define FEC_EIR_CLEAR_ALL (0xFFF80000)
-#define FEC_EIR_HBERR (0x80000000)
-#define FEC_EIR_BABR (0x40000000)
-#define FEC_EIR_BABT (0x20000000)
-#define FEC_EIR_GRA (0x10000000)
-#define FEC_EIR_TXF (0x08000000)
-#define FEC_EIR_TXB (0x04000000)
-#define FEC_EIR_RXF (0x02000000)
-#define FEC_EIR_RXB (0x01000000)
-#define FEC_EIR_MII (0x00800000)
-#define FEC_EIR_EBERR (0x00400000)
-#define FEC_EIR_LC (0x00200000)
-#define FEC_EIR_RL (0x00100000)
-#define FEC_EIR_UN (0x00080000)
+#define FEC_EIR_CLEAR_ALL (0xFFF80000)
+#define FEC_EIR_HBERR (0x80000000)
+#define FEC_EIR_BABR (0x40000000)
+#define FEC_EIR_BABT (0x20000000)
+#define FEC_EIR_GRA (0x10000000)
+#define FEC_EIR_TXF (0x08000000)
+#define FEC_EIR_TXB (0x04000000)
+#define FEC_EIR_RXF (0x02000000)
+#define FEC_EIR_RXB (0x01000000)
+#define FEC_EIR_MII (0x00800000)
+#define FEC_EIR_EBERR (0x00400000)
+#define FEC_EIR_LC (0x00200000)
+#define FEC_EIR_RL (0x00100000)
+#define FEC_EIR_UN (0x00080000)
/* Bit definitions and macros for FEC_RDAR */
-#define FEC_RDAR_R_DES_ACTIVE (0x01000000)
+#define FEC_RDAR_R_DES_ACTIVE (0x01000000)
/* Bit definitions and macros for FEC_TDAR */
-#define FEC_TDAR_X_DES_ACTIVE (0x01000000)
+#define FEC_TDAR_X_DES_ACTIVE (0x01000000)
/* Bit definitions and macros for FEC_ECR */
-#define FEC_ECR_ETHER_EN (0x00000002)
-#define FEC_ECR_RESET (0x00000001)
+#define FEC_ECR_ETHER_EN (0x00000002)
+#define FEC_ECR_RESET (0x00000001)
/* Bit definitions and macros for FEC_MMFR */
-#define FEC_MMFR_DATA(x) (((x)&0xFFFF))
-#define FEC_MMFR_ST(x) (((x)&0x03)<<30)
-#define FEC_MMFR_ST_01 (0x40000000)
-#define FEC_MMFR_OP_RD (0x20000000)
-#define FEC_MMFR_OP_WR (0x10000000)
-#define FEC_MMFR_PA(x) (((x)&0x1F)<<23)
-#define FEC_MMFR_RA(x) (((x)&0x1F)<<18)
-#define FEC_MMFR_TA(x) (((x)&0x03)<<16)
-#define FEC_MMFR_TA_10 (0x00020000)
+#define FEC_MMFR_DATA(x) (((x)&0xFFFF))
+#define FEC_MMFR_ST(x) (((x)&0x03)<<30)
+#define FEC_MMFR_ST_01 (0x40000000)
+#define FEC_MMFR_OP_RD (0x20000000)
+#define FEC_MMFR_OP_WR (0x10000000)
+#define FEC_MMFR_PA(x) (((x)&0x1F)<<23)
+#define FEC_MMFR_RA(x) (((x)&0x1F)<<18)
+#define FEC_MMFR_TA(x) (((x)&0x03)<<16)
+#define FEC_MMFR_TA_10 (0x00020000)
/* Bit definitions and macros for FEC_MSCR */
-#define FEC_MSCR_DIS_PREAMBLE (0x00000080)
-#define FEC_MSCR_MII_SPEED(x) (((x)&0x3F)<<1)
+#define FEC_MSCR_DIS_PREAMBLE (0x00000080)
+#define FEC_MSCR_MII_SPEED(x) (((x)&0x3F)<<1)
/* Bit definitions and macros for FEC_MIBC */
-#define FEC_MIBC_MIB_DISABLE (0x80000000)
-#define FEC_MIBC_MIB_IDLE (0x40000000)
+#define FEC_MIBC_MIB_DISABLE (0x80000000)
+#define FEC_MIBC_MIB_IDLE (0x40000000)
/* Bit definitions and macros for FEC_RCR */
-#define FEC_RCR_MAX_FL(x) (((x)&0x7FF)<<16)
-#define FEC_RCR_FCE (0x00000020)
-#define FEC_RCR_BC_REJ (0x00000010)
-#define FEC_RCR_PROM (0x00000008)
-#define FEC_RCR_MII_MODE (0x00000004)
-#define FEC_RCR_DRT (0x00000002)
-#define FEC_RCR_LOOP (0x00000001)
+#define FEC_RCR_MAX_FL(x) (((x)&0x7FF)<<16)
+#define FEC_RCR_FCE (0x00000020)
+#define FEC_RCR_BC_REJ (0x00000010)
+#define FEC_RCR_PROM (0x00000008)
+#define FEC_RCR_MII_MODE (0x00000004)
+#define FEC_RCR_DRT (0x00000002)
+#define FEC_RCR_LOOP (0x00000001)
/* Bit definitions and macros for FEC_TCR */
-#define FEC_TCR_RFC_PAUSE (0x00000010)
-#define FEC_TCR_TFC_PAUSE (0x00000008)
-#define FEC_TCR_FDEN (0x00000004)
-#define FEC_TCR_HBC (0x00000002)
-#define FEC_TCR_GTS (0x00000001)
+#define FEC_TCR_RFC_PAUSE (0x00000010)
+#define FEC_TCR_TFC_PAUSE (0x00000008)
+#define FEC_TCR_FDEN (0x00000004)
+#define FEC_TCR_HBC (0x00000002)
+#define FEC_TCR_GTS (0x00000001)
/* Bit definitions and macros for FEC_PAUR */
-#define FEC_PAUR_PADDR2(x) (((x)&0xFFFF)<<16)
-#define FEC_PAUR_TYPE(x) ((x)&0xFFFF)
+#define FEC_PAUR_PADDR2(x) (((x)&0xFFFF)<<16)
+#define FEC_PAUR_TYPE(x) ((x)&0xFFFF)
/* Bit definitions and macros for FEC_OPD */
-#define FEC_OPD_PAUSE_DUR(x) (((x)&0x0000FFFF)<<0)
-#define FEC_OPD_OPCODE(x) (((x)&0x0000FFFF)<<16)
+#define FEC_OPD_PAUSE_DUR(x) (((x)&0x0000FFFF)<<0)
+#define FEC_OPD_OPCODE(x) (((x)&0x0000FFFF)<<16)
/* Bit definitions and macros for FEC_TFWR */
-#define FEC_TFWR_X_WMRK(x) ((x)&0x03)
-#define FEC_TFWR_X_WMRK_64 (0x01)
-#define FEC_TFWR_X_WMRK_128 (0x02)
-#define FEC_TFWR_X_WMRK_192 (0x03)
+#define FEC_TFWR_X_WMRK(x) ((x)&0x03)
+#define FEC_TFWR_X_WMRK_64 (0x01)
+#define FEC_TFWR_X_WMRK_128 (0x02)
+#define FEC_TFWR_X_WMRK_192 (0x03)
/* Bit definitions and macros for FEC_FRBR */
-#define FEC_FRBR_R_BOUND(x) (((x)&0xFF)<<2)
+#define FEC_FRBR_R_BOUND(x) (((x)&0xFF)<<2)
/* Bit definitions and macros for FEC_FRSR */
-#define FEC_FRSR_R_FSTART(x) (((x)&0xFF)<<2)
+#define FEC_FRSR_R_FSTART(x) (((x)&0xFF)<<2)
/* Bit definitions and macros for FEC_ERDSR */
#define FEC_ERDSR_R_DES_START(x) (((x)&0x3FFFFFFF)<<2)
@@ -348,8 +348,7 @@
/* Bit definitions and macros for FEC_EMRBR */
#define FEC_EMRBR_R_BUF_SIZE(x) (((x)&0x7F)<<4)
-#define FEC_RESET_DELAY 100
-#define FEC_RX_TOUT 100
+#define FEC_RESET_DELAY 100
+#define FEC_RX_TOUT 100
-#endif /* CONFIG_MCFFEC */
#endif /* fec_h */
diff --git a/include/asm-m68k/fsl_mcdmafec.h b/include/asm-m68k/fsl_mcdmafec.h
new file mode 100644
index 0000000..82da593
--- /dev/null
+++ b/include/asm-m68k/fsl_mcdmafec.h
@@ -0,0 +1,176 @@
+/*
+ * fsl_mcdmafec.h -- Multi-channel DMA Fast Ethernet Controller definitions
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef fsl_mcdmafec_h
+#define fsl_mcdmafec_h
+
+/* Re-use of the definitions */
+#include <asm/fec.h>
+
+typedef struct fecdma {
+ u32 rsvd0; /* 0x000 */
+ u32 eir; /* 0x004 */
+ u32 eimr; /* 0x008 */
+ u32 rsvd1[6]; /* 0x00C - 0x023 */
+ u32 ecr; /* 0x024 */
+ u32 rsvd2[6]; /* 0x028 - 0x03F */
+ u32 mmfr; /* 0x040 */
+ u32 mscr; /* 0x044 */
+ u32 rsvd3[7]; /* 0x048 - 0x063 */
+ u32 mibc; /* 0x064 */
+ u32 rsvd4[7]; /* 0x068 - 0x083 */
+ u32 rcr; /* 0x084 */
+ u32 rhr; /* 0x088 */
+ u32 rsvd5[14]; /* 0x08C - 0x0C3 */
+ u32 tcr; /* 0x0C4 */
+ u32 rsvd6[7]; /* 0x0C8 - 0x0E3 */
+ u32 palr; /* 0x0E4 */
+ u32 paur; /* 0x0E8 */
+ u32 opd; /* 0x0EC */
+ u32 rsvd7[10]; /* 0x0F0 - 0x117 */
+ u32 iaur; /* 0x118 */
+ u32 ialr; /* 0x11C */
+ u32 gaur; /* 0x120 */
+ u32 galr; /* 0x124 */
+ u32 rsvd8[7]; /* 0x128 - 0x143 */
+ u32 tfwr; /* 0x144 */
+ u32 rsvd9[14]; /* 0x148 - 0x17F */
+ u32 fmc; /* 0x180 */
+ u32 rfdr; /* 0x184 */
+ u32 rfsr; /* 0x188 */
+ u32 rfcr; /* 0x18C */
+ u32 rlrfp; /* 0x190 */
+ u32 rlwfp; /* 0x194 */
+ u32 rfar; /* 0x198 */
+ u32 rfrp; /* 0x19C */
+ u32 rfwp; /* 0x1A0 */
+ u32 tfdr; /* 0x1A4 */
+ u32 tfsr; /* 0x1A8 */
+ u32 tfcr; /* 0x1AC */
+ u32 tlrfp; /* 0x1B0 */
+ u32 tlwfp; /* 0x1B4 */
+ u32 tfar; /* 0x1B8 */
+ u32 tfrp; /* 0x1BC */
+ u32 tfwp; /* 0x1C0 */
+ u32 frst; /* 0x1C4 */
+ u32 ctcwr; /* 0x1C8 */
+} fecdma_t;
+
+struct fec_info_dma {
+ int index;
+ u32 iobase;
+ u32 pinmux;
+ u32 miibase;
+ int phy_addr;
+ int dup_spd;
+ char *phy_name;
+ int phyname_init;
+ cbd_t *rxbd; /* Rx BD */
+ cbd_t *txbd; /* Tx BD */
+ uint rxIdx;
+ uint txIdx;
+ char *txbuf;
+ int initialized;
+ struct fec_info_dma *next;
+
+ u16 rxTask; /* DMA receive Task Number */
+ u16 txTask; /* DMA Transmit Task Number */
+ u16 rxPri; /* DMA Receive Priority */
+ u16 txPri; /* DMA Transmit Priority */
+ u16 rxInit; /* DMA Receive Initiator */
+ u16 txInit; /* DMA Transmit Initiator */
+ u16 usedTbdIdx; /* next transmit BD to clean */
+ u16 cleanTbdNum; /* the number of available transmit BDs */
+};
+
+/* Bit definitions and macros for IEVENT */
+#define FEC_EIR_TXERR (0x00040000)
+#define FEC_EIR_RXERR (0x00020000)
+#undef FEC_EIR_CLEAR_ALL
+#define FEC_EIR_CLEAR_ALL (0xFFFE0000)
+
+/* Bit definitions and macros for R_HASH */
+#define FEC_RHASH_FCE_DC (0x80000000)
+#define FEC_RHASH_MULTCAST (0x40000000)
+#define FEC_RHASH_HASH(x) (((x)&0x0000003F)<<24)
+
+/* Bit definitions and macros for FEC_TFWR */
+#undef FEC_TFWR_X_WMRK
+#undef FEC_TFWR_X_WMRK_64
+#undef FEC_TFWR_X_WMRK_128
+#undef FEC_TFWR_X_WMRK_192
+
+#define FEC_TFWR_X_WMRK(x) ((x)&0x0F)
+#define FEC_TFWR_X_WMRK_64 (0x00)
+#define FEC_TFWR_X_WMRK_128 (0x01)
+#define FEC_TFWR_X_WMRK_192 (0x02)
+#define FEC_TFWR_X_WMRK_256 (0x03)
+#define FEC_TFWR_X_WMRK_320 (0x04)
+#define FEC_TFWR_X_WMRK_384 (0x05)
+#define FEC_TFWR_X_WMRK_448 (0x06)
+#define FEC_TFWR_X_WMRK_512 (0x07)
+#define FEC_TFWR_X_WMRK_576 (0x08)
+#define FEC_TFWR_X_WMRK_640 (0x09)
+#define FEC_TFWR_X_WMRK_704 (0x0A)
+#define FEC_TFWR_X_WMRK_768 (0x0B)
+#define FEC_TFWR_X_WMRK_832 (0x0C)
+#define FEC_TFWR_X_WMRK_896 (0x0D)
+#define FEC_TFWR_X_WMRK_960 (0x0E)
+#define FEC_TFWR_X_WMRK_1024 (0x0F)
+
+/* FIFO definitions */
+/* Bit definitions and macros for FSTAT */
+#define FIFO_STAT_IP (0x80000000)
+#define FIFO_STAT_FRAME(x) (((x)&0x0000000F)<<24)
+#define FIFO_STAT_FAE (0x00800000)
+#define FIFO_STAT_RXW (0x00400000)
+#define FIFO_STAT_UF (0x00200000)
+#define FIFO_STAT_OF (0x00100000)
+#define FIFO_STAT_FR (0x00080000)
+#define FIFO_STAT_FULL (0x00040000)
+#define FIFO_STAT_ALARM (0x00020000)
+#define FIFO_STAT_EMPTY (0x00010000)
+
+/* Bit definitions and macros for FCTRL */
+#define FIFO_CTRL_WCTL (0x40000000)
+#define FIFO_CTRL_WFR (0x20000000)
+#define FIFO_CTRL_FRAME (0x08000000)
+#define FIFO_CTRL_GR(x) (((x)&0x00000007)<<24)
+#define FIFO_CTRL_IPMASK (0x00800000)
+#define FIFO_CTRL_FAEMASK (0x00400000)
+#define FIFO_CTRL_RXWMASK (0x00200000)
+#define FIFO_CTRL_UFMASK (0x00100000)
+#define FIFO_CTRL_OFMASK (0x00080000)
+
+int fecpin_setclear(struct eth_device *dev, int setclear);
+void mii_init(void);
+uint mii_send(uint mii_cmd);
+int mii_discover_phy(struct eth_device *dev);
+int mcffec_miiphy_read(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value);
+int mcffec_miiphy_write(char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value);
+
+#endif /* fsl_mcdmafec_h */
diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h
index 9d9894b..1e26eb0 100644
--- a/include/asm-m68k/global_data.h
+++ b/include/asm-m68k/global_data.h
@@ -53,6 +53,9 @@
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long have_console; /* serial_init() was called */
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
+ unsigned long fb_base; /* Base addr of framebuffer memory */
+#endif
#ifdef CONFIG_BOARD_TYPES
unsigned long board_type;
#endif
diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h
index ffb9a37..916bf96 100644
--- a/include/asm-m68k/immap.h
+++ b/include/asm-m68k/immap.h
@@ -26,6 +26,40 @@
#ifndef __IMMAP_H
#define __IMMAP_H
+#ifdef CONFIG_M52277
+#include <asm/immap_5227x.h>
+#include <asm/m5227x.h>
+
+#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x4000))
+
+#define CFG_MCFRTC_BASE (MMAP_RTC)
+
+#ifdef CONFIG_LCD
+#define CFG_LCD_BASE (MMAP_LCD)
+#endif
+
+/* Timer */
+#ifdef CONFIG_MCFTMR
+#define CFG_UDELAY_BASE (MMAP_DTMR0)
+#define CFG_TMR_BASE (MMAP_DTMR1)
+#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
+#define CFG_TMRINTR_NO (INT0_HI_DTMR1)
+#define CFG_TMRINTR_MASK (INTC_IPRH_INT33)
+#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK)
+#define CFG_TMRINTR_PRI (6)
+#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8)
+#endif
+
+#ifdef CONFIG_MCFPIT
+#define CFG_UDELAY_BASE (MMAP_PIT0)
+#define CFG_PIT_BASE (MMAP_PIT1)
+#define CFG_PIT_PRESCALE (6)
+#endif
+
+#define CFG_INTR_BASE (MMAP_INTC0)
+#define CFG_NUM_IRQS (128)
+#endif /* CONFIG_M52277 */
+
#ifdef CONFIG_M5235
#include <asm/immap_5235.h>
#include <asm/m5235.h>
@@ -169,7 +203,7 @@
#endif
#endif /* CONFIG_M5282 */
-#ifdef CONFIG_M5329
+#if defined(CONFIG_M5329) || defined(CONFIG_M5373)
#include <asm/immap_5329.h>
#include <asm/m5329.h>
@@ -197,7 +231,7 @@
#define CFG_INTR_BASE (MMAP_INTC0)
#define CFG_NUM_IRQS (128)
-#endif /* CONFIG_M5329 */
+#endif /* CONFIG_M5329 && CONFIG_M5373 */
#ifdef CONFIG_M54455
#include <asm/immap_5445x.h>
@@ -232,11 +266,104 @@
#define CFG_NUM_IRQS (128)
#ifdef CONFIG_PCI
-#define CFG_PCI_BAR0 CFG_SDRAM_BASE
-#define CFG_PCI_BAR4 CFG_SDRAM_BASE
-#define CFG_PCI_TBATR0 (CFG_SDRAM_BASE)
-#define CFG_PCI_TBATR4 (CFG_SDRAM_BASE)
+#define CFG_PCI_BAR0 (CFG_MBAR)
+#define CFG_PCI_BAR5 (CFG_SDRAM_BASE)
+#define CFG_PCI_TBATR0 (CFG_MBAR)
+#define CFG_PCI_TBATR5 (CFG_SDRAM_BASE)
#endif
#endif /* CONFIG_M54455 */
+#ifdef CONFIG_M547x
+#include <asm/immap_547x_8x.h>
+#include <asm/m547x_8x.h>
+
+#ifdef CONFIG_FSLDMAFEC
+#define CFG_FEC0_IOBASE (MMAP_FEC0)
+#define CFG_FEC1_IOBASE (MMAP_FEC1)
+
+#define FEC0_RX_TASK 0
+#define FEC0_TX_TASK 1
+#define FEC0_RX_PRIORITY 6
+#define FEC0_TX_PRIORITY 7
+#define FEC0_RX_INIT 16
+#define FEC0_TX_INIT 17
+#define FEC1_RX_TASK 2
+#define FEC1_TX_TASK 3
+#define FEC1_RX_PRIORITY 6
+#define FEC1_TX_PRIORITY 7
+#define FEC1_RX_INIT 30
+#define FEC1_TX_INIT 31
+#endif
+
+#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x100))
+
+#ifdef CONFIG_SLTTMR
+#define CFG_UDELAY_BASE (MMAP_SLT1)
+#define CFG_TMR_BASE (MMAP_SLT0)
+#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
+#define CFG_TMRINTR_NO (INT0_HI_SLT0)
+#define CFG_TMRINTR_MASK (INTC_IPRH_INT54)
+#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK)
+#define CFG_TMRINTR_PRI (0x1E)
+#define CFG_TIMER_PRESCALER (gd->bus_clk / 1000000)
+#endif
+
+#define CFG_INTR_BASE (MMAP_INTC0)
+#define CFG_NUM_IRQS (128)
+
+#ifdef CONFIG_PCI
+#define CFG_PCI_BAR0 (0x40000000)
+#define CFG_PCI_BAR1 (CFG_SDRAM_BASE)
+#define CFG_PCI_TBATR0 (CFG_MBAR)
+#define CFG_PCI_TBATR1 (CFG_SDRAM_BASE)
+#endif
+#endif /* CONFIG_M547x */
+
+#ifdef CONFIG_M548x
+#include <asm/immap_547x_8x.h>
+#include <asm/m547x_8x.h>
+
+#ifdef CONFIG_FSLDMAFEC
+#define CFG_FEC0_IOBASE (MMAP_FEC0)
+#define CFG_FEC1_IOBASE (MMAP_FEC1)
+
+#define FEC0_RX_TASK 0
+#define FEC0_TX_TASK 1
+#define FEC0_RX_PRIORITY 6
+#define FEC0_TX_PRIORITY 7
+#define FEC0_RX_INIT 16
+#define FEC0_TX_INIT 17
+#define FEC1_RX_TASK 2
+#define FEC1_TX_TASK 3
+#define FEC1_RX_PRIORITY 6
+#define FEC1_TX_PRIORITY 7
+#define FEC1_RX_INIT 30
+#define FEC1_TX_INIT 31
+#endif
+
+#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x100))
+
+/* Timer */
+#ifdef CONFIG_SLTTMR
+#define CFG_UDELAY_BASE (MMAP_SLT1)
+#define CFG_TMR_BASE (MMAP_SLT0)
+#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
+#define CFG_TMRINTR_NO (INT0_HI_SLT0)
+#define CFG_TMRINTR_MASK (INTC_IPRH_INT54)
+#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK)
+#define CFG_TMRINTR_PRI (0x1E)
+#define CFG_TIMER_PRESCALER (gd->bus_clk / 1000000)
+#endif
+
+#define CFG_INTR_BASE (MMAP_INTC0)
+#define CFG_NUM_IRQS (128)
+
+#ifdef CONFIG_PCI
+#define CFG_PCI_BAR0 (CFG_MBAR)
+#define CFG_PCI_BAR1 (CFG_SDRAM_BASE)
+#define CFG_PCI_TBATR0 (CFG_MBAR)
+#define CFG_PCI_TBATR1 (CFG_SDRAM_BASE)
+#endif
+#endif /* CONFIG_M548x */
+
#endif /* __IMMAP_H */
diff --git a/include/asm-m68k/immap_5227x.h b/include/asm-m68k/immap_5227x.h
new file mode 100644
index 0000000..1d1e6f1
--- /dev/null
+++ b/include/asm-m68k/immap_5227x.h
@@ -0,0 +1,343 @@
+/*
+ * MCF5227x Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5227X__
+#define __IMMAP_5227X__
+
+/* Module Base Addresses */
+#define MMAP_SCM1 (CFG_MBAR + 0x00000000)
+#define MMAP_XBS (CFG_MBAR + 0x00004000)
+#define MMAP_FBCS (CFG_MBAR + 0x00008000)
+#define MMAP_CAN (CFG_MBAR + 0x00020000)
+#define MMAP_RTC (CFG_MBAR + 0x0003C000)
+#define MMAP_SCM2 (CFG_MBAR + 0x00040010)
+#define MMAP_SCM3 (CFG_MBAR + 0x00040070)
+#define MMAP_EDMA (CFG_MBAR + 0x00044000)
+#define MMAP_INTC0 (CFG_MBAR + 0x00048000)
+#define MMAP_INTC1 (CFG_MBAR + 0x0004C000)
+#define MMAP_IACK (CFG_MBAR + 0x00054000)
+#define MMAP_I2C (CFG_MBAR + 0x00058000)
+#define MMAP_DSPI (CFG_MBAR + 0x0005C000)
+#define MMAP_UART0 (CFG_MBAR + 0x00060000)
+#define MMAP_UART1 (CFG_MBAR + 0x00064000)
+#define MMAP_UART2 (CFG_MBAR + 0x00068000)
+#define MMAP_DTMR0 (CFG_MBAR + 0x00070000)
+#define MMAP_DTMR1 (CFG_MBAR + 0x00074000)
+#define MMAP_DTMR2 (CFG_MBAR + 0x00078000)
+#define MMAP_DTMR3 (CFG_MBAR + 0x0007C000)
+#define MMAP_PIT0 (CFG_MBAR + 0x00080000)
+#define MMAP_PIT1 (CFG_MBAR + 0x00084000)
+#define MMAP_PWM (CFG_MBAR + 0x00090000)
+#define MMAP_EPORT (CFG_MBAR + 0x00094000)
+#define MMAP_RCM (CFG_MBAR + 0x000A0000)
+#define MMAP_CCM (CFG_MBAR + 0x000A0004)
+#define MMAP_GPIO (CFG_MBAR + 0x000A4000)
+#define MMAP_ADC (CFG_MBAR + 0x000A8000)
+#define MMAP_LCD (CFG_MBAR + 0x000AC000)
+#define MMAP_LCD_BGLUT (CFG_MBAR + 0x000AC800)
+#define MMAP_LCD_GWLUT (CFG_MBAR + 0x000ACC00)
+#define MMAP_USBHW (CFG_MBAR + 0x000B0000)
+#define MMAP_USBCAPS (CFG_MBAR + 0x000B0100)
+#define MMAP_USBEHCI (CFG_MBAR + 0x000B0140)
+#define MMAP_USBOTG (CFG_MBAR + 0x000B01A0)
+#define MMAP_SDRAM (CFG_MBAR + 0x000B8000)
+#define MMAP_SSI (CFG_MBAR + 0x000BC000)
+#define MMAP_PLL (CFG_MBAR + 0x000C0000)
+
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/lcd.h>
+#include <asm/coldfire/ssi.h>
+
+/* Interrupt Controller (INTC) */
+typedef struct int0_ctrl {
+ u32 iprh0; /* 0x00 Pending Register High */
+ u32 iprl0; /* 0x04 Pending Register Low */
+ u32 imrh0; /* 0x08 Mask Register High */
+ u32 imrl0; /* 0x0C Mask Register Low */
+ u32 frch0; /* 0x10 Force Register High */
+ u32 frcl0; /* 0x14 Force Register Low */
+ u16 res1; /* 0x18 - 0x19 */
+ u16 icfg0; /* 0x1A Configuration Register */
+ u8 simr0; /* 0x1C Set Interrupt Mask */
+ u8 cimr0; /* 0x1D Clear Interrupt Mask */
+ u8 clmask0; /* 0x1E Current Level Mask */
+ u8 slmask; /* 0x1F Saved Level Mask */
+ u32 res2[8]; /* 0x20 - 0x3F */
+ u8 icr0[64]; /* 0x40 - 0x7F Control registers */
+ u32 res3[24]; /* 0x80 - 0xDF */
+ u8 swiack0; /* 0xE0 Software Interrupt ack */
+ u8 res4[3]; /* 0xE1 - 0xE3 */
+ u8 Lniack0_1; /* 0xE4 Level n interrupt ack */
+ u8 res5[3]; /* 0xE5 - 0xE7 */
+ u8 Lniack0_2; /* 0xE8 Level n interrupt ack */
+ u8 res6[3]; /* 0xE9 - 0xEB */
+ u8 Lniack0_3; /* 0xEC Level n interrupt ack */
+ u8 res7[3]; /* 0xED - 0xEF */
+ u8 Lniack0_4; /* 0xF0 Level n interrupt ack */
+ u8 res8[3]; /* 0xF1 - 0xF3 */
+ u8 Lniack0_5; /* 0xF4 Level n interrupt ack */
+ u8 res9[3]; /* 0xF5 - 0xF7 */
+ u8 Lniack0_6; /* 0xF8 Level n interrupt ack */
+ u8 resa[3]; /* 0xF9 - 0xFB */
+ u8 Lniack0_7; /* 0xFC Level n interrupt ack */
+ u8 resb[3]; /* 0xFD - 0xFF */
+} int0_t;
+
+typedef struct int1_ctrl {
+ /* Interrupt Controller 1 */
+ u32 iprh1; /* 0x00 Pending Register High */
+ u32 iprl1; /* 0x04 Pending Register Low */
+ u32 imrh1; /* 0x08 Mask Register High */
+ u32 imrl1; /* 0x0C Mask Register Low */
+ u32 frch1; /* 0x10 Force Register High */
+ u32 frcl1; /* 0x14 Force Register Low */
+ u16 res1; /* 0x18 */
+ u16 icfg1; /* 0x1A Configuration Register */
+ u8 simr1; /* 0x1C Set Interrupt Mask */
+ u8 cimr1; /* 0x1D Clear Interrupt Mask */
+ u16 res2; /* 0x1E - 0x1F */
+ u32 res3[8]; /* 0x20 - 0x3F */
+ u8 icr1[64]; /* 0x40 - 0x7F */
+ u32 res4[24]; /* 0x80 - 0xDF */
+ u8 swiack1; /* 0xE0 Software Interrupt ack */
+ u8 res5[3]; /* 0xE1 - 0xE3 */
+ u8 Lniack1_1; /* 0xE4 Level n interrupt ack */
+ u8 res6[3]; /* 0xE5 - 0xE7 */
+ u8 Lniack1_2; /* 0xE8 Level n interrupt ack */
+ u8 res7[3]; /* 0xE9 - 0xEB */
+ u8 Lniack1_3; /* 0xEC Level n interrupt ack */
+ u8 res8[3]; /* 0xED - 0xEF */
+ u8 Lniack1_4; /* 0xF0 Level n interrupt ack */
+ u8 res9[3]; /* 0xF1 - 0xF3 */
+ u8 Lniack1_5; /* 0xF4 Level n interrupt ack */
+ u8 resa[3]; /* 0xF5 - 0xF7 */
+ u8 Lniack1_6; /* 0xF8 Level n interrupt ack */
+ u8 resb[3]; /* 0xF9 - 0xFB */
+ u8 Lniack1_7; /* 0xFC Level n interrupt ack */
+ u8 resc[3]; /* 0xFD - 0xFF */
+} int1_t;
+
+/* Global Interrupt Acknowledge (IACK) */
+typedef struct iack {
+ u8 resv0[0xE0];
+ u8 gswiack;
+ u8 resv1[0x3];
+ u8 gl1iack;
+ u8 resv2[0x3];
+ u8 gl2iack;
+ u8 resv3[0x3];
+ u8 gl3iack;
+ u8 resv4[0x3];
+ u8 gl4iack;
+ u8 resv5[0x3];
+ u8 gl5iack;
+ u8 resv6[0x3];
+ u8 gl6iack;
+ u8 resv7[0x3];
+ u8 gl7iack;
+} iack_t;
+
+/* Edge Port Module (EPORT) */
+typedef struct eport {
+ u16 eppar;
+ u8 epddr;
+ u8 epier;
+ u8 epdr;
+ u8 eppdr;
+ u8 epfr;
+} eport_t;
+
+/* Reset Controller Module (RCM) */
+typedef struct rcm {
+ u8 rcr;
+ u8 rsr;
+} rcm_t;
+
+/* Chip Configuration Module (CCM) */
+typedef struct ccm {
+ u16 ccr; /* Chip Configuration (Rd-only) */
+ u16 resv1;
+ u16 rcon; /* Reset Configuration (Rd-only) */
+ u16 cir; /* Chip Identification (Rd-only) */
+ u32 resv2;
+ u16 misccr; /* Miscellaneous Control */
+ u16 cdr; /* Clock Divider */
+ u16 uocsr; /* USB On-the-Go Controller Status */
+ u16 resv4;
+ u16 sbfsr; /* Serial Boot Status */
+ u16 sbfcr; /* Serial Boot Control */
+} ccm_t;
+
+/* General Purpose I/O Module (GPIO) */
+typedef struct gpio {
+ /* Port Output Data Registers */
+ u8 podr_be; /* 0x00 */
+ u8 podr_cs; /* 0x01 */
+ u8 podr_fbctl; /* 0x02 */
+ u8 podr_i2c; /* 0x03 */
+ u8 rsvd1; /* 0x04 */
+ u8 podr_uart; /* 0x05 */
+ u8 podr_dspi; /* 0x06 */
+ u8 podr_timer; /* 0x07 */
+ u8 podr_lcdctl; /* 0x08 */
+ u8 podr_lcddatah; /* 0x09 */
+ u8 podr_lcddatam; /* 0x0A */
+ u8 podr_lcddatal; /* 0x0B */
+
+ /* Port Data Direction Registers */
+ u8 pddr_be; /* 0x0C */
+ u8 pddr_cs; /* 0x0D */
+ u8 pddr_fbctl; /* 0x0E */
+ u8 pddr_i2c; /* 0x0F */
+ u8 rsvd2; /* 0x10 */
+ u8 pddr_uart; /* 0x11 */
+ u8 pddr_dspi; /* 0x12 */
+ u8 pddr_timer; /* 0x13 */
+ u8 pddr_lcdctl; /* 0x14 */
+ u8 pddr_lcddatah; /* 0x15 */
+ u8 pddr_lcddatam; /* 0x16 */
+ u8 pddr_lcddatal; /* 0x17 */
+
+ /* Port Pin Data/Set Data Registers */
+ u8 ppdsdr_be; /* 0x18 */
+ u8 ppdsdr_cs; /* 0x19 */
+ u8 ppdsdr_fbctl; /* 0x1A */
+ u8 ppdsdr_i2c; /* 0x1B */
+ u8 rsvd3; /* 0x1C */
+ u8 ppdsdr_uart; /* 0x1D */
+ u8 ppdsdr_dspi; /* 0x1E */
+ u8 ppdsdr_timer; /* 0x1F */
+ u8 ppdsdr_lcdctl; /* 0x20 */
+ u8 ppdsdr_lcddatah; /* 0x21 */
+ u8 ppdsdr_lcddatam; /* 0x22 */
+ u8 ppdsdr_lcddatal; /* 0x23 */
+
+ /* Port Clear Output Data Registers */
+ u8 pclrr_be; /* 0x24 */
+ u8 pclrr_cs; /* 0x25 */
+ u8 pclrr_fbctl; /* 0x26 */
+ u8 pclrr_i2c; /* 0x27 */
+ u8 rsvd4; /* 0x28 */
+ u8 pclrr_uart; /* 0x29 */
+ u8 pclrr_dspi; /* 0x2A */
+ u8 pclrr_timer; /* 0x2B */
+ u8 pclrr_lcdctl; /* 0x2C */
+ u8 pclrr_lcddatah; /* 0x2D */
+ u8 pclrr_lcddatam; /* 0x2E */
+ u8 pclrr_lcddatal; /* 0x2F */
+
+ /* Pin Assignment Registers */
+ u8 par_be; /* 0x30 */
+ u8 par_cs; /* 0x31 */
+ u8 par_fbctl; /* 0x32 */
+ u8 par_i2c; /* 0x33 */
+ u16 par_uart; /* 0x34 */
+ u8 par_dspi; /* 0x36 */
+ u8 par_timer; /* 0x37 */
+ u8 par_lcdctl; /* 0x38 */
+ u8 par_irq; /* 0x39 */
+ u16 rsvd6; /* 0x3A - 0x3B */
+ u32 par_lcdh; /* 0x3C */
+ u32 par_lcdl; /* 0x40 */
+
+ /* Mode select control registers */
+ u8 mscr_fb; /* 0x44 */
+ u8 mscr_sdram; /* 0x45 */
+
+ u16 rsvd7; /* 0x46 - 0x47 */
+ u8 dscr_dspi; /* 0x48 */
+ u8 dscr_timer; /* 0x49 */
+ u8 dscr_i2c; /* 0x4A */
+ u8 dscr_lcd; /* 0x4B */
+ u8 dscr_debug; /* 0x4C */
+ u8 dscr_clkrst; /* 0x4D */
+ u8 dscr_irq; /* 0x4E */
+ u8 dscr_uart; /* 0x4F */
+} gpio_t;
+
+/* SDRAM Controller (SDRAMC) */
+typedef struct sdramc {
+ u32 sdmr; /* Mode/Extended Mode */
+ u32 sdcr; /* Control */
+ u32 sdcfg1; /* Configuration 1 */
+ u32 sdcfg2; /* Chip Select */
+ u8 resv0[0x100];
+ u32 sdcs0; /* Mode/Extended Mode */
+ u32 sdcs1; /* Mode/Extended Mode */
+} sdramc_t;
+
+/* Phase Locked Loop (PLL) */
+typedef struct pll {
+ u32 pcr; /* PLL Control */
+ u32 psr; /* PLL Status */
+} pll_t;
+
+/* System Control Module register */
+typedef struct scm1 {
+ u32 mpr; /* 0x00 Master Privilege */
+ u32 rsvd1[7];
+ u32 pacra; /* 0x20 */
+ u32 pacrb; /* 0x24 */
+ u32 pacrc; /* 0x28 */
+ u32 pacrd; /* 0x2C */
+ u32 rsvd2[4];
+ u32 pacre; /* 0x40 */
+ u32 pacrf; /* 0x44 */
+ u32 pacrg; /* 0x48 */
+ u32 rsvd3;
+ u32 pacri; /* 0x50 */
+} scm1_t;
+
+typedef struct scm2_ctrl {
+ u8 res1[3]; /* 0x00 - 0x02 */
+ u8 wcr; /* 0x03 wakeup control */
+ u16 res2; /* 0x04 - 0x05 */
+ u16 cwcr; /* 0x06 Core Watchdog Control */
+ u8 res3[3]; /* 0x08 - 0x0A */
+ u8 cwsr; /* 0x0B Core Watchdog Service */
+ u8 res4[2]; /* 0x0C - 0x0D */
+ u8 scmisr; /* 0x0F Interrupt Status */
+ u32 res5; /* 0x20 */
+ u32 bcr; /* 0x24 Burst Configuration */
+} scm2_t;
+
+typedef struct scm3_ctrl {
+ u32 cfadr; /* 0x00 Core Fault Address */
+ u8 res7; /* 0x04 */
+ u8 cfier; /* 0x05 Core Fault Interrupt Enable */
+ u8 cfloc; /* 0x06 Core Fault Location */
+ u8 cfatr; /* 0x07 Core Fault Attributes */
+ u32 cfdtr; /* 0x08 Core Fault Data */
+} scm3_t;
+
+typedef struct rtcex {
+ u32 rsvd1[3];
+ u32 gocu;
+ u32 gocl;
+} rtcex_t;
+#endif /* __IMMAP_5227X__ */
diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h
index 271c276..7678406 100644
--- a/include/asm-m68k/immap_5329.h
+++ b/include/asm-m68k/immap_5329.h
@@ -68,6 +68,12 @@
#define MMAP_SSI 0xFC0BC000
#define MMAP_PLL 0xFC0C0000
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/lcd.h>
+#include <asm/coldfire/ssi.h>
+
/* System control module registers */
typedef struct scm1_ctrl {
u32 mpr0; /* 0x00 Master Privilege Register 0 */
@@ -159,61 +165,6 @@
u32 bmt1; /* 0x54 Bus Monitor Timeout 1 */
} scm2_t;
-/* Cross-Bar Switch Module */
-typedef struct xbs_ctrl {
- u32 prs1; /* 0x100 Priority Register Slave 1 */
- u32 res1[3]; /* 0x104 - 0F */
- u32 crs1; /* 0x110 Control Register Slave 1 */
- u32 res2[187]; /* 0x114 - 0x3FF */
-
- u32 prs4; /* 0x400 Priority Register Slave 4 */
- u32 res3[3]; /* 0x404 - 0F */
- u32 crs4; /* 0x410 Control Register Slave 4 */
- u32 res4[123]; /* 0x414 - 0x5FF */
-
- u32 prs6; /* 0x600 Priority Register Slave 6 */
- u32 res5[3]; /* 0x604 - 0F */
- u32 crs6; /* 0x610 Control Register Slave 6 */
- u32 res6[59]; /* 0x614 - 0x6FF */
-
- u32 prs7; /* 0x700 Priority Register Slave 7 */
- u32 res7[3]; /* 0x704 - 0F */
- u32 crs7; /* 0x710 Control Register Slave 7 */
-} xbs_t;
-
-/* Flexbus module Chip select registers */
-typedef struct fbcs_ctrl {
- u16 csar0; /* 0x00 Chip-Select Address Register 0 */
- u16 res0;
- u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */
- u32 cscr0; /* 0x08 Chip-Select Control Register 0 */
-
- u16 csar1; /* 0x0C Chip-Select Address Register 1 */
- u16 res1;
- u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */
- u32 cscr1; /* 0x14 Chip-Select Control Register 1 */
-
- u16 csar2; /* 0x18 Chip-Select Address Register 2 */
- u16 res2;
- u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */
- u32 cscr2; /* 0x20 Chip-Select Control Register 2 */
-
- u16 csar3; /* 0x24 Chip-Select Address Register 3 */
- u16 res3;
- u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */
- u32 cscr3; /* 0x2C Chip-Select Control Register 3 */
-
- u16 csar4; /* 0x30 Chip-Select Address Register 4 */
- u16 res4;
- u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */
- u32 cscr4; /* 0x38 Chip-Select Control Register 4 */
-
- u16 csar5; /* 0x3C Chip-Select Address Register 5 */
- u16 res5;
- u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */
- u32 cscr5; /* 0x44 Chip-Select Control Register 5 */
-} fbcs_t;
-
/* FlexCan module registers */
typedef struct can_ctrl {
u32 mcr; /* 0x00 Module Configuration register */
@@ -255,64 +206,6 @@
u32 cfdtr; /* 0x7C Core Fault Data Register */
} scm3_t;
-/* eDMA module registers */
-typedef struct edma_ctrl {
- u32 cr; /* 0x00 Control Register */
- u32 es; /* 0x04 Error Status Register */
- u16 res1[3]; /* 0x08 - 0x0D */
- u16 erq; /* 0x0E Enable Request Register */
- u16 res2[3]; /* 0x10 - 0x15 */
- u16 eei; /* 0x16 Enable Error Interrupt Request */
- u8 serq; /* 0x18 Set Enable Request */
- u8 cerq; /* 0x19 Clear Enable Request */
- u8 seei; /* 0x1A Set Enable Error Interrupt Request */
- u8 ceei; /* 0x1B Clear Enable Error Interrupt Request */
- u8 cint; /* 0x1C Clear Interrupt Enable Register */
- u8 cerr; /* 0x1D Clear Error Register */
- u8 ssrt; /* 0x1E Set START Bit Register */
- u8 cdne; /* 0x1F Clear DONE Status Bit Register */
- u16 res3[3]; /* 0x20 - 0x25 */
- u16 intr; /* 0x26 Interrupt Request Register */
- u16 res4[3]; /* 0x28 - 0x2D */
- u16 err; /* 0x2E Error Register */
- u32 res5[52]; /* 0x30 - 0xFF */
- u8 dchpri0; /* 0x100 Channel 0 Priority Register */
- u8 dchpri1; /* 0x101 Channel 1 Priority Register */
- u8 dchpri2; /* 0x102 Channel 2 Priority Register */
- u8 dchpri3; /* 0x103 Channel 3 Priority Register */
- u8 dchpri4; /* 0x104 Channel 4 Priority Register */
- u8 dchpri5; /* 0x105 Channel 5 Priority Register */
- u8 dchpri6; /* 0x106 Channel 6 Priority Register */
- u8 dchpri7; /* 0x107 Channel 7 Priority Register */
- u8 dchpri8; /* 0x108 Channel 8 Priority Register */
- u8 dchpri9; /* 0x109 Channel 9 Priority Register */
- u8 dchpri10; /* 0x110 Channel 10 Priority Register */
- u8 dchpri11; /* 0x111 Channel 11 Priority Register */
- u8 dchpri12; /* 0x112 Channel 12 Priority Register */
- u8 dchpri13; /* 0x113 Channel 13 Priority Register */
- u8 dchpri14; /* 0x114 Channel 14 Priority Register */
- u8 dchpri15; /* 0x115 Channel 15 Priority Register */
-} edma_t;
-
-/* TCD - eDMA*/
-typedef struct tcd_ctrl {
- u32 saddr; /* 0x00 Source Address */
- u16 attr; /* 0x04 Transfer Attributes */
- u16 soff; /* 0x06 Signed Source Address Offset */
- u32 nbytes; /* 0x08 Minor Byte Count */
- u32 slast; /* 0x0C Last Source Address Adjustment */
- u32 daddr; /* 0x10 Destination address */
- u16 citer; /* 0x14 Current Minor Loop Link, Major Loop Count */
- u16 doff; /* 0x16 Signed Destination Address Offset */
- u32 dlast_sga; /* 0x18 Last Destination Address Adjustment/Scatter Gather Address */
- u16 biter; /* 0x1C Beginning Minor Loop Link, Major Loop Count */
- u16 csr; /* 0x1E Control and Status */
-} tcd_st;
-
-typedef struct tcd_multiple {
- tcd_st tcd[16];
-} tcd_t;
-
/* Interrupt module registers */
typedef struct int0_ctrl {
/* Interrupt Controller 0 */
@@ -389,20 +282,6 @@
u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */
} intgack_t;
-/*I2C module registers */
-typedef struct i2c_ctrl {
- u8 adr; /* 0x00 address register */
- u8 res1[3]; /* 0x01 - 0x03 */
- u8 fdr; /* 0x04 frequency divider register */
- u8 res2[3]; /* 0x05 - 0x07 */
- u8 cr; /* 0x08 control register */
- u8 res3[3]; /* 0x09 - 0x0B */
- u8 sr; /* 0x0C status register */
- u8 res4[3]; /* 0x0D - 0x0F */
- u8 dr; /* 0x10 data register */
- u8 res5[3]; /* 0x11 - 0x13 */
-} i2c_t;
-
/* QSPI module registers */
typedef struct qspi_ctrl {
u16 qmr; /* Mode register */
@@ -499,91 +378,133 @@
/* GPIO port registers */
typedef struct gpio_ctrl {
/* Port Output Data Registers */
+#ifdef CONFIG_M5329
u8 podr_fech; /* 0x00 */
u8 podr_fecl; /* 0x01 */
+#else
+ u16 res00; /* 0x00 - 0x01 */
+#endif
u8 podr_ssi; /* 0x02 */
u8 podr_busctl; /* 0x03 */
u8 podr_be; /* 0x04 */
u8 podr_cs; /* 0x05 */
u8 podr_pwm; /* 0x06 */
u8 podr_feci2c; /* 0x07 */
- u8 res1; /* 0x08 */
+ u8 res08; /* 0x08 */
u8 podr_uart; /* 0x09 */
u8 podr_qspi; /* 0x0A */
u8 podr_timer; /* 0x0B */
- u8 res2; /* 0x0C */
+#ifdef CONFIG_M5329
+ u8 res0C; /* 0x0C */
u8 podr_lcddatah; /* 0x0D */
u8 podr_lcddatam; /* 0x0E */
u8 podr_lcddatal; /* 0x0F */
u8 podr_lcdctlh; /* 0x10 */
u8 podr_lcdctll; /* 0x11 */
+#else
+ u16 res0C; /* 0x0C - 0x0D */
+ u8 podr_fech; /* 0x0E */
+ u8 podr_fecl; /* 0x0F */
+ u16 res10[3]; /* 0x10 - 0x15 */
+#endif
/* Port Data Direction Registers */
- u16 res3; /* 0x12 - 0x13 */
+#ifdef CONFIG_M5329
+ u16 res12; /* 0x12 - 0x13 */
u8 pddr_fech; /* 0x14 */
u8 pddr_fecl; /* 0x15 */
+#endif
u8 pddr_ssi; /* 0x16 */
u8 pddr_busctl; /* 0x17 */
u8 pddr_be; /* 0x18 */
u8 pddr_cs; /* 0x19 */
u8 pddr_pwm; /* 0x1A */
u8 pddr_feci2c; /* 0x1B */
- u8 res4; /* 0x1C */
+ u8 res1C; /* 0x1C */
u8 pddr_uart; /* 0x1D */
u8 pddr_qspi; /* 0x1E */
u8 pddr_timer; /* 0x1F */
- u8 res5; /* 0x20 */
+#ifdef CONFIG_M5329
+ u8 res20; /* 0x20 */
u8 pddr_lcddatah; /* 0x21 */
u8 pddr_lcddatam; /* 0x22 */
u8 pddr_lcddatal; /* 0x23 */
u8 pddr_lcdctlh; /* 0x24 */
u8 pddr_lcdctll; /* 0x25 */
- u16 res6; /* 0x26 - 0x27 */
+ u16 res26; /* 0x26 - 0x27 */
+#else
+ u16 res20; /* 0x20 - 0x21 */
+ u8 pddr_fech; /* 0x22 */
+ u8 pddr_fecl; /* 0x23 */
+ u16 res24[3]; /* 0x24 - 0x29 */
+#endif
/* Port Data Direction Registers */
+#ifdef CONFIG_M5329
u8 ppd_fech; /* 0x28 */
u8 ppd_fecl; /* 0x29 */
+#endif
u8 ppd_ssi; /* 0x2A */
u8 ppd_busctl; /* 0x2B */
u8 ppd_be; /* 0x2C */
u8 ppd_cs; /* 0x2D */
u8 ppd_pwm; /* 0x2E */
u8 ppd_feci2c; /* 0x2F */
- u8 res7; /* 0x30 */
+ u8 res30; /* 0x30 */
u8 ppd_uart; /* 0x31 */
u8 ppd_qspi; /* 0x32 */
u8 ppd_timer; /* 0x33 */
- u8 res8; /* 0x34 */
+#ifdef CONFIG_M5329
+ u8 res34; /* 0x34 */
u8 ppd_lcddatah; /* 0x35 */
u8 ppd_lcddatam; /* 0x36 */
u8 ppd_lcddatal; /* 0x37 */
u8 ppd_lcdctlh; /* 0x38 */
u8 ppd_lcdctll; /* 0x39 */
- u16 res9; /* 0x3A - 0x3B */
+ u16 res3A; /* 0x3A - 0x3B */
+#else
+ u16 res34; /* 0x34 - 0x35 */
+ u8 ppd_fech; /* 0x36 */
+ u8 ppd_fecl; /* 0x37 */
+ u16 res38[3]; /* 0x38 - 0x3D */
+#endif
/* Port Clear Output Data Registers */
- u8 pclrr_fech; /* 0x3C */
- u8 pclrr_fecl; /* 0x3D */
+#ifdef CONFIG_M5329
+ u8 res3C; /* 0x3C */
+ u8 pclrr_fech; /* 0x3D */
+ u8 pclrr_fecl; /* 0x3E */
+#else
u8 pclrr_ssi; /* 0x3E */
+#endif
u8 pclrr_busctl; /* 0x3F */
u8 pclrr_be; /* 0x40 */
u8 pclrr_cs; /* 0x41 */
u8 pclrr_pwm; /* 0x42 */
u8 pclrr_feci2c; /* 0x43 */
- u8 res10; /* 0x44 */
+ u8 res44; /* 0x44 */
u8 pclrr_uart; /* 0x45 */
u8 pclrr_qspi; /* 0x46 */
u8 pclrr_timer; /* 0x47 */
- u8 res11; /* 0x48 */
- u8 pclrr_lcddatah; /* 0x49 */
- u8 pclrr_lcddatam; /* 0x4A */
- u8 pclrr_lcddatal; /* 0x4B */
+#ifdef CONFIG_M5329
+ u8 pclrr_lcddatah; /* 0x48 */
+ u8 pclrr_lcddatam; /* 0x49 */
+ u8 pclrr_lcddatal; /* 0x4A */
+ u8 pclrr_ssi; /* 0x4B */
u8 pclrr_lcdctlh; /* 0x4C */
u8 pclrr_lcdctll; /* 0x4D */
- u16 res12; /* 0x4E - 0x4F */
+ u16 res4E; /* 0x4E - 0x4F */
+#else
+ u16 res48; /* 0x48 - 0x49 */
+ u8 pclrr_fech; /* 0x4A */
+ u8 pclrr_fecl; /* 0x4B */
+ u8 res4C[5]; /* 0x4C - 0x50 */
+#endif
/* Pin Assignment Registers */
+#ifdef CONFIG_M5329
u8 par_fec; /* 0x50 */
+#endif
u8 par_pwm; /* 0x51 */
u8 par_busctl; /* 0x52 */
u8 par_feci2c; /* 0x53 */
@@ -593,15 +514,20 @@
u16 par_uart; /* 0x58 */
u16 par_qspi; /* 0x5A */
u8 par_timer; /* 0x5C */
+#ifdef CONFIG_M5329
u8 par_lcddata; /* 0x5D */
u16 par_lcdctl; /* 0x5E */
+#else
+ u8 par_fec; /* 0x5D */
+ u16 res5E; /* 0x5E - 0x5F */
+#endif
u16 par_irq; /* 0x60 */
- u16 res16; /* 0x62 - 0x63 */
+ u16 res62; /* 0x62 - 0x63 */
/* Mode Select Control Registers */
u8 mscr_flexbus; /* 0x64 */
u8 mscr_sdram; /* 0x65 */
- u16 res17; /* 0x66 - 0x67 */
+ u16 res66; /* 0x66 - 0x67 */
/* Drive Strength Control Registers */
u8 dscr_i2c; /* 0x68 */
@@ -611,49 +537,16 @@
u8 dscr_qspi; /* 0x6C */
u8 dscr_timer; /* 0x6D */
u8 dscr_ssi; /* 0x6E */
+#ifdef CONFIG_M5329
u8 dscr_lcd; /* 0x6F */
+#else
+ u8 res6F; /* 0x6F */
+#endif
u8 dscr_debug; /* 0x70 */
u8 dscr_clkrst; /* 0x71 */
u8 dscr_irq; /* 0x72 */
} gpio_t;
-/* LCD module registers */
-typedef struct lcd_ctrl {
- u32 ssar; /* 0x00 Screen Start Address Register */
- u32 sr; /* 0x04 LCD Size Register */
- u32 vpw; /* 0x08 Virtual Page Width Register */
- u32 cpr; /* 0x0C Cursor Position Register */
- u32 cwhb; /* 0x10 Cursor Width Height and Blink Register */
- u32 ccmr; /* 0x14 Color Cursor Mapping Register */
- u32 pcr; /* 0x18 Panel Configuration Register */
- u32 hcr; /* 0x1C Horizontal Configuration Register */
- u32 vcr; /* 0x20 Vertical Configuration Register */
- u32 por; /* 0x24 Panning Offset Register */
- u32 scr; /* 0x28 Sharp Configuration Register */
- u32 pccr; /* 0x2C PWM Contrast Control Register */
- u32 dcr; /* 0x30 DMA Control Register */
- u32 rmcr; /* 0x34 Refresh Mode Control Register */
- u32 icr; /* 0x38 Refresh Mode Control Register */
- u32 ier; /* 0x3C Interrupt Enable Register */
- u32 isr; /* 0x40 Interrupt Status Register */
- u32 res[4];
- u32 gwsar; /* 0x50 Graphic Window Start Address Register */
- u32 gwsr; /* 0x54 Graphic Window Size Register */
- u32 gwvpw; /* 0x58 Graphic Window Virtual Page Width Register */
- u32 gwpor; /* 0x5C Graphic Window Panning Offset Register */
- u32 gwpr; /* 0x60 Graphic Window Position Register */
- u32 gwcr; /* 0x64 Graphic Window Control Register */
- u32 gwdcr; /* 0x68 Graphic Window DMA Control Register */
-} lcd_t;
-
-typedef struct lcdbg_ctrl {
- u32 bglut[255];
-} lcdbg_t;
-
-typedef struct lcdgw_ctrl {
- u32 gwlut[255];
-} lcdgw_t;
-
/* USB OTG module registers */
typedef struct usb_otg {
u32 id; /* 0x000 Identification Register */
@@ -758,29 +651,6 @@
u32 cs1; /* 0x114 Chip Select 1 Configuration */
} sdram_t;
-/* Synchronous serial interface */
-typedef struct ssi_ctrl {
- u32 tx0; /* 0x00 Transmit Data Register 0 */
- u32 tx1; /* 0x04 Transmit Data Register 1 */
- u32 rx0; /* 0x08 Receive Data Register 0 */
- u32 rx1; /* 0x0C Receive Data Register 1 */
- u32 cr; /* 0x10 Control Register */
- u32 isr; /* 0x14 Interrupt Status Register */
- u32 ier; /* 0x18 Interrupt Enable Register */
- u32 tcr; /* 0x1C Transmit Configuration Register */
- u32 rcr; /* 0x20 Receive Configuration Register */
- u32 ccr; /* 0x24 Clock Control Register */
- u32 res1; /* 0x28 */
- u32 fcsr; /* 0x2C FIFO Control/Status Register */
- u32 res2[2]; /* 0x30 - 0x37 */
- u32 acr; /* 0x38 AC97 Control Register */
- u32 acadd; /* 0x3C AC97 Command Address Register */
- u32 acdat; /* 0x40 AC97 Command Data Register */
- u32 atag; /* 0x44 AC97 Tag Register */
- u32 tmask; /* 0x48 Transmit Time Slot Mask Register */
- u32 rmask; /* 0x4C Receive Time Slot Mask Register */
-} ssi_t;
-
/* Clock Module registers */
typedef struct pll_ctrl {
u8 podr; /* 0x00 Output Divider Register */
diff --git a/include/asm-m68k/immap_5445x.h b/include/asm-m68k/immap_5445x.h
index d091d7b..ef8930e 100644
--- a/include/asm-m68k/immap_5445x.h
+++ b/include/asm-m68k/immap_5445x.h
@@ -33,6 +33,7 @@
#define MMAP_FEC0 0xFC030000
#define MMAP_FEC1 0xFC034000
#define MMAP_RTC 0xFC03C000
+#define MMAP_SCM2 0xFC040000
#define MMAP_EDMA 0xFC044000
#define MMAP_INTC0 0xFC048000
#define MMAP_INTC1 0xFC04C000
@@ -63,11 +64,18 @@
#define MMAP_SSI 0xFC0BC000
#define MMAP_PLL 0xFC0C4000
#define MMAP_ATA 0x90000000
+#define MMAP_USBHW 0xFC0B0000
+#define MMAP_USBCAPS 0xFC0B0100
+#define MMAP_USBEHCI 0xFC0B0140
+#define MMAP_USBOTG 0xFC0B01A0
-/*********************************************************************
-* ATA
-*********************************************************************/
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/ssi.h>
+/* ATA */
typedef struct atac {
/* PIO */
u8 toff; /* 0x00 */
@@ -117,379 +125,7 @@
u8 rsvd6[106];
} atac_t;
-/*********************************************************************
-* Cross-bar switch (XBS)
-*********************************************************************/
-
-typedef struct xbs {
- u8 resv0[0x100];
- u32 prs1; /* XBS Priority Register */
- u8 resv1[0xC];
- u32 crs1; /* XBS Control Register */
- u8 resv2[0xEC];
- u32 prs2; /* XBS Priority Register */
- u8 resv3[0xC];
- u32 crs2; /* XBS Control Register */
- u8 resv4[0xEC];
- u32 prs3; /* XBS Priority Register */
- u8 resv5[0xC];
- u32 crs3; /* XBS Control Register */
- u8 resv6[0xEC];
- u32 prs4; /* XBS Priority Register */
- u8 resv7[0xC];
- u32 crs4; /* XBS Control Register */
- u8 resv8[0xEC];
- u32 prs5; /* XBS Priority Register */
- u8 resv9[0xC];
- u32 crs5; /* XBS Control Register */
- u8 resv10[0xEC];
- u32 prs6; /* XBS Priority Register */
- u8 resv11[0xC];
- u32 crs6; /* XBS Control Register */
- u8 resv12[0xEC];
- u32 prs7; /* XBS Priority Register */
- u8 resv13[0xC];
- u32 crs7; /* XBS Control Register */
-} xbs_t;
-
-/*********************************************************************
-* FlexBus Chip Selects (FBCS)
-*********************************************************************/
-
-typedef struct fbcs {
- u32 csar0; /* Chip-select Address Register */
- u32 csmr0; /* Chip-select Mask Register */
- u32 cscr0; /* Chip-select Control Register */
- u32 csar1; /* Chip-select Address Register */
- u32 csmr1; /* Chip-select Mask Register */
- u32 cscr1; /* Chip-select Control Register */
- u32 csar2; /* Chip-select Address Register */
- u32 csmr2; /* Chip-select Mask Register */
- u32 cscr2; /* Chip-select Control Register */
- u32 csar3; /* Chip-select Address Register */
- u32 csmr3; /* Chip-select Mask Register */
- u32 cscr3; /* Chip-select Control Register */
-} fbcs_t;
-
-/*********************************************************************
-* Enhanced DMA (EDMA)
-*********************************************************************/
-
-typedef struct edma {
- u32 cr;
- u32 es;
- u8 resv0[0x6];
- u16 erq;
- u8 resv1[0x6];
- u16 eei;
- u8 serq;
- u8 cerq;
- u8 seei;
- u8 ceei;
- u8 cint;
- u8 cerr;
- u8 ssrt;
- u8 cdne;
- u8 resv2[0x6];
- u16 intr;
- u8 resv3[0x6];
- u16 err;
- u8 resv4[0xD0];
- u8 dchpri0;
- u8 dchpri1;
- u8 dchpri2;
- u8 dchpri3;
- u8 dchpri4;
- u8 dchpri5;
- u8 dchpri6;
- u8 dchpri7;
- u8 dchpri8;
- u8 dchpri9;
- u8 dchpri10;
- u8 dchpri11;
- u8 dchpri12;
- u8 dchpri13;
- u8 dchpri14;
- u8 dchpri15;
- u8 resv5[0xEF0];
- u32 tcd0_saddr;
- u16 tcd0_attr;
- u16 tcd0_soff;
- u32 tcd0_nbytes;
- u32 tcd0_slast;
- u32 tcd0_daddr;
- union {
- u16 tcd0_citer_elink;
- u16 tcd0_citer;
- };
- u16 tcd0_doff;
- u32 tcd0_dlast_sga;
- union {
- u16 tcd0_biter_elink;
- u16 tcd0_biter;
- };
- u16 tcd0_csr;
- u32 tcd1_saddr;
- u16 tcd1_attr;
- u16 tcd1_soff;
- u32 tcd1_nbytes;
- u32 tcd1_slast;
- u32 tcd1_daddr;
- union {
- u16 tcd1_citer_elink;
- u16 tcd1_citer;
- };
- u16 tcd1_doff;
- u32 tcd1_dlast_sga;
- union {
- u16 tcd1_biter;
- u16 tcd1_biter_elink;
- };
- u16 tcd1_csr;
- u32 tcd2_saddr;
- u16 tcd2_attr;
- u16 tcd2_soff;
- u32 tcd2_nbytes;
- u32 tcd2_slast;
- u32 tcd2_daddr;
- union {
- u16 tcd2_citer;
- u16 tcd2_citer_elink;
- };
- u16 tcd2_doff;
- u32 tcd2_dlast_sga;
- union {
- u16 tcd2_biter_elink;
- u16 tcd2_biter;
- };
- u16 tcd2_csr;
- u32 tcd3_saddr;
- u16 tcd3_attr;
- u16 tcd3_soff;
- u32 tcd3_nbytes;
- u32 tcd3_slast;
- u32 tcd3_daddr;
- union {
- u16 tcd3_citer;
- u16 tcd3_citer_elink;
- };
- u16 tcd3_doff;
- u32 tcd3_dlast_sga;
- union {
- u16 tcd3_biter_elink;
- u16 tcd3_biter;
- };
- u16 tcd3_csr;
- u32 tcd4_saddr;
- u16 tcd4_attr;
- u16 tcd4_soff;
- u32 tcd4_nbytes;
- u32 tcd4_slast;
- u32 tcd4_daddr;
- union {
- u16 tcd4_citer;
- u16 tcd4_citer_elink;
- };
- u16 tcd4_doff;
- u32 tcd4_dlast_sga;
- union {
- u16 tcd4_biter;
- u16 tcd4_biter_elink;
- };
- u16 tcd4_csr;
- u32 tcd5_saddr;
- u16 tcd5_attr;
- u16 tcd5_soff;
- u32 tcd5_nbytes;
- u32 tcd5_slast;
- u32 tcd5_daddr;
- union {
- u16 tcd5_citer;
- u16 tcd5_citer_elink;
- };
- u16 tcd5_doff;
- u32 tcd5_dlast_sga;
- union {
- u16 tcd5_biter_elink;
- u16 tcd5_biter;
- };
- u16 tcd5_csr;
- u32 tcd6_saddr;
- u16 tcd6_attr;
- u16 tcd6_soff;
- u32 tcd6_nbytes;
- u32 tcd6_slast;
- u32 tcd6_daddr;
- union {
- u16 tcd6_citer;
- u16 tcd6_citer_elink;
- };
- u16 tcd6_doff;
- u32 tcd6_dlast_sga;
- union {
- u16 tcd6_biter_elink;
- u16 tcd6_biter;
- };
- u16 tcd6_csr;
- u32 tcd7_saddr;
- u16 tcd7_attr;
- u16 tcd7_soff;
- u32 tcd7_nbytes;
- u32 tcd7_slast;
- u32 tcd7_daddr;
- union {
- u16 tcd7_citer;
- u16 tcd7_citer_elink;
- };
- u16 tcd7_doff;
- u32 tcd7_dlast_sga;
- union {
- u16 tcd7_biter_elink;
- u16 tcd7_biter;
- };
- u16 tcd7_csr;
- u32 tcd8_saddr;
- u16 tcd8_attr;
- u16 tcd8_soff;
- u32 tcd8_nbytes;
- u32 tcd8_slast;
- u32 tcd8_daddr;
- union {
- u16 tcd8_citer;
- u16 tcd8_citer_elink;
- };
- u16 tcd8_doff;
- u32 tcd8_dlast_sga;
- union {
- u16 tcd8_biter_elink;
- u16 tcd8_biter;
- };
- u16 tcd8_csr;
- u32 tcd9_saddr;
- u16 tcd9_attr;
- u16 tcd9_soff;
- u32 tcd9_nbytes;
- u32 tcd9_slast;
- u32 tcd9_daddr;
- union {
- u16 tcd9_citer_elink;
- u16 tcd9_citer;
- };
- u16 tcd9_doff;
- u32 tcd9_dlast_sga;
- union {
- u16 tcd9_biter_elink;
- u16 tcd9_biter;
- };
- u16 tcd9_csr;
- u32 tcd10_saddr;
- u16 tcd10_attr;
- u16 tcd10_soff;
- u32 tcd10_nbytes;
- u32 tcd10_slast;
- u32 tcd10_daddr;
- union {
- u16 tcd10_citer_elink;
- u16 tcd10_citer;
- };
- u16 tcd10_doff;
- u32 tcd10_dlast_sga;
- union {
- u16 tcd10_biter;
- u16 tcd10_biter_elink;
- };
- u16 tcd10_csr;
- u32 tcd11_saddr;
- u16 tcd11_attr;
- u16 tcd11_soff;
- u32 tcd11_nbytes;
- u32 tcd11_slast;
- u32 tcd11_daddr;
- union {
- u16 tcd11_citer;
- u16 tcd11_citer_elink;
- };
- u16 tcd11_doff;
- u32 tcd11_dlast_sga;
- union {
- u16 tcd11_biter;
- u16 tcd11_biter_elink;
- };
- u16 tcd11_csr;
- u32 tcd12_saddr;
- u16 tcd12_attr;
- u16 tcd12_soff;
- u32 tcd12_nbytes;
- u32 tcd12_slast;
- u32 tcd12_daddr;
- union {
- u16 tcd12_citer;
- u16 tcd12_citer_elink;
- };
- u16 tcd12_doff;
- u32 tcd12_dlast_sga;
- union {
- u16 tcd12_biter;
- u16 tcd12_biter_elink;
- };
- u16 tcd12_csr;
- u32 tcd13_saddr;
- u16 tcd13_attr;
- u16 tcd13_soff;
- u32 tcd13_nbytes;
- u32 tcd13_slast;
- u32 tcd13_daddr;
- union {
- u16 tcd13_citer_elink;
- u16 tcd13_citer;
- };
- u16 tcd13_doff;
- u32 tcd13_dlast_sga;
- union {
- u16 tcd13_biter_elink;
- u16 tcd13_biter;
- };
- u16 tcd13_csr;
- u32 tcd14_saddr;
- u16 tcd14_attr;
- u16 tcd14_soff;
- u32 tcd14_nbytes;
- u32 tcd14_slast;
- u32 tcd14_daddr;
- union {
- u16 tcd14_citer;
- u16 tcd14_citer_elink;
- };
- u16 tcd14_doff;
- u32 tcd14_dlast_sga;
- union {
- u16 tcd14_biter_elink;
- u16 tcd14_biter;
- };
- u16 tcd14_csr;
- u32 tcd15_saddr;
- u16 tcd15_attr;
- u16 tcd15_soff;
- u32 tcd15_nbytes;
- u32 tcd15_slast;
- u32 tcd15_daddr;
- union {
- u16 tcd15_citer_elink;
- u16 tcd15_citer;
- };
- u16 tcd15_doff;
- u32 tcd15_dlast_sga;
- union {
- u16 tcd15_biter;
- u16 tcd15_biter_elink;
- };
- u16 tcd15_csr;
-} edma_t;
-
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
-
+/* Interrupt Controller (INTC) */
typedef struct int0_ctrl {
u32 iprh0; /* 0x00 Pending Register High */
u32 iprl0; /* 0x04 Pending Register Low */
@@ -558,10 +194,7 @@
u8 resc[3]; /* 0xFD - 0xFF */
} int1_t;
-/*********************************************************************
-* Global Interrupt Acknowledge (IACK)
-*********************************************************************/
-
+/* Global Interrupt Acknowledge (IACK) */
typedef struct iack {
u8 resv0[0xE0];
u8 gswiack;
@@ -581,41 +214,7 @@
u8 gl7iack;
} iack_t;
-/*********************************************************************
-* DMA Serial Peripheral Interface (DSPI)
-*********************************************************************/
-
-typedef struct dspi {
- u32 dmcr;
- u8 resv0[0x4];
- u32 dtcr;
- u32 dctar0;
- u32 dctar1;
- u32 dctar2;
- u32 dctar3;
- u32 dctar4;
- u32 dctar5;
- u32 dctar6;
- u32 dctar7;
- u32 dsr;
- u32 dirsr;
- u32 dtfr;
- u32 drfr;
- u32 dtfdr0;
- u32 dtfdr1;
- u32 dtfdr2;
- u32 dtfdr3;
- u8 resv1[0x30];
- u32 drfdr0;
- u32 drfdr1;
- u32 drfdr2;
- u32 drfdr3;
-} dspi_t;
-
-/*********************************************************************
-* Edge Port Module (EPORT)
-*********************************************************************/
-
+/* Edge Port Module (EPORT) */
typedef struct eport {
u16 eppar;
u8 epddr;
@@ -625,10 +224,7 @@
u8 epfr;
} eport_t;
-/*********************************************************************
-* Watchdog Timer Modules (WTM)
-*********************************************************************/
-
+/* Watchdog Timer Modules (WTM) */
typedef struct wtm {
u16 wcr;
u16 wmr;
@@ -636,10 +232,7 @@
u16 wsr;
} wtm_t;
-/*********************************************************************
-* Serial Boot Facility (SBF)
-*********************************************************************/
-
+/* Serial Boot Facility (SBF) */
typedef struct sbf {
u8 resv0[0x18];
u16 sbfsr; /* Serial Boot Facility Status Register */
@@ -647,19 +240,13 @@
u16 sbfcr; /* Serial Boot Facility Control Register */
} sbf_t;
-/*********************************************************************
-* Reset Controller Module (RCM)
-*********************************************************************/
-
+/* Reset Controller Module (RCM) */
typedef struct rcm {
u8 rcr;
u8 rsr;
} rcm_t;
-/*********************************************************************
-* Chip Configuration Module (CCM)
-*********************************************************************/
-
+/* Chip Configuration Module (CCM) */
typedef struct ccm {
u8 ccm_resv0[0x4];
u16 ccr; /* Chip Configuration Register (256 TEPBGA, Read-only) */
@@ -672,10 +259,7 @@
u16 uocsr; /* USB On-the-Go Controller Status Register */
} ccm_t;
-/*********************************************************************
-* General Purpose I/O Module (GPIO)
-*********************************************************************/
-
+/* General Purpose I/O Module (GPIO) */
typedef struct gpio {
u8 podr_fec0h; /* FEC0 High Port Output Data Register */
u8 podr_fec0l; /* FEC0 Low Port Output Data Register */
@@ -803,10 +387,7 @@
u8 dscr_ata; /* ATA Drive Strength Control Register */
} gpio_t;
-/*********************************************************************
-* Random Number Generator (RNG)
-*********************************************************************/
-
+/* Random Number Generator (RNG) */
typedef struct rng {
u32 rngcr;
u32 rngsr;
@@ -814,10 +395,7 @@
u32 rngout;
} rng_t;
-/*********************************************************************
-* SDRAM Controller (SDRAMC)
-*********************************************************************/
-
+/* SDRAM Controller (SDRAMC) */
typedef struct sdramc {
u32 sdmr; /* SDRAM Mode/Extended Mode Register */
u32 sdcr; /* SDRAM Control Register */
@@ -828,36 +406,7 @@
u32 sdcs1; /* SDRAM Mode/Extended Mode Register */
} sdramc_t;
-/*********************************************************************
-* Synchronous Serial Interface (SSI)
-*********************************************************************/
-
-typedef struct ssi {
- u32 tx0;
- u32 tx1;
- u32 rx0;
- u32 rx1;
- u32 cr;
- u32 isr;
- u32 ier;
- u32 tcr;
- u32 rcr;
- u32 ccr;
- u8 resv0[0x4];
- u32 fcsr;
- u8 resv1[0x8];
- u32 acr;
- u32 acadd;
- u32 acdat;
- u32 atag;
- u32 tmask;
- u32 rmask;
-} ssi_t;
-
-/*********************************************************************
-* Phase Locked Loop (PLL)
-*********************************************************************/
-
+/* Phase Locked Loop (PLL) */
typedef struct pll {
u32 pcr; /* PLL Control Register */
u32 psr; /* PLL Status Register */
@@ -927,7 +476,27 @@
u32 pacrf; /* 0x44 Peripheral Access Control Register F */
u32 pacrg; /* 0x48 Peripheral Access Control Register G */
} scm1_t;
-/********************************************************************/
+
+typedef struct scm2 {
+ u8 rsvd1[19]; /* 0x00 - 0x12 */
+ u8 wcr; /* 0x13 */
+ u16 rsvd2; /* 0x14 - 0x15 */
+ u16 cwcr; /* 0x16 */
+ u8 rsvd3[3]; /* 0x18 - 0x1A */
+ u8 cwsr; /* 0x1B */
+ u8 rsvd4[3]; /* 0x1C - 0x1E */
+ u8 scmisr; /* 0x1F */
+ u32 rsvd5; /* 0x20 - 0x23 */
+ u8 bcr; /* 0x24 */
+ u8 rsvd6[74]; /* 0x25 - 0x6F */
+ u32 cfadr; /* 0x70 */
+ u8 rsvd7; /* 0x74 */
+ u8 cfier; /* 0x75 */
+ u8 cfloc; /* 0x76 */
+ u8 cfatr; /* 0x77 */
+ u32 rsvd8; /* 0x78 - 0x7B */
+ u32 cfdtr; /* 0x7C */
+} scm2_t;
typedef struct rtcex {
u32 rsvd1[3];
diff --git a/include/asm-m68k/immap_547x_8x.h b/include/asm-m68k/immap_547x_8x.h
new file mode 100644
index 0000000..54ef40f
--- /dev/null
+++ b/include/asm-m68k/immap_547x_8x.h
@@ -0,0 +1,297 @@
+/*
+ * MCF547x_8x Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_547x_8x__
+#define __IMMAP_547x_8x__
+
+#define MMAP_SIU (CFG_MBAR + 0x00000000)
+#define MMAP_SDRAM (CFG_MBAR + 0x00000100)
+#define MMAP_XARB (CFG_MBAR + 0x00000240)
+#define MMAP_FBCS (CFG_MBAR + 0x00000500)
+#define MMAP_INTC0 (CFG_MBAR + 0x00000700)
+#define MMAP_GPTMR (CFG_MBAR + 0x00000800)
+#define MMAP_SLT0 (CFG_MBAR + 0x00000900)
+#define MMAP_SLT1 (CFG_MBAR + 0x00000910)
+#define MMAP_GPIO (CFG_MBAR + 0x00000A00)
+#define MMAP_PCI (CFG_MBAR + 0x00000B00)
+#define MMAP_PCIARB (CFG_MBAR + 0x00000C00)
+#define MMAP_EXTDMA (CFG_MBAR + 0x00000D00)
+#define MMAP_EPORT (CFG_MBAR + 0x00000F00)
+#define MMAP_CTM (CFG_MBAR + 0x00007F00)
+#define MMAP_MCDMA (CFG_MBAR + 0x00008000)
+#define MMAP_SCPCI (CFG_MBAR + 0x00008400)
+#define MMAP_UART0 (CFG_MBAR + 0x00008600)
+#define MMAP_UART1 (CFG_MBAR + 0x00008700)
+#define MMAP_UART2 (CFG_MBAR + 0x00008800)
+#define MMAP_UART3 (CFG_MBAR + 0x00008900)
+#define MMAP_DSPI (CFG_MBAR + 0x00008A00)
+#define MMAP_I2C (CFG_MBAR + 0x00008F00)
+#define MMAP_FEC0 (CFG_MBAR + 0x00009000)
+#define MMAP_FEC1 (CFG_MBAR + 0x00009800)
+#define MMAP_CAN0 (CFG_MBAR + 0x0000A000)
+#define MMAP_CAN1 (CFG_MBAR + 0x0000A800)
+#define MMAP_USBD (CFG_MBAR + 0x0000B000)
+#define MMAP_SRAM (CFG_MBAR + 0x00010000)
+#define MMAP_SRAMCFG (CFG_MBAR + 0x0001FF00)
+#define MMAP_SEC (CFG_MBAR + 0x00020000)
+
+#include <asm/coldfire/flexbus.h>
+
+typedef struct siu {
+ u32 mbar; /* 0x00 */
+ u32 drv; /* 0x04 */
+ u32 rsvd1[2]; /* 0x08 - 0x1F */
+ u32 sbcr; /* 0x10 */
+ u32 rsvd2[3]; /* 0x14 - 0x1F */
+ u32 cs0cfg; /* 0x20 */
+ u32 cs1cfg; /* 0x24 */
+ u32 cs2cfg; /* 0x28 */
+ u32 cs3cfg; /* 0x2C */
+ u32 rsvd3[2]; /* 0x30 - 0x37 */
+ u32 secsacr; /* 0x38 */
+ u32 rsvd4[2]; /* 0x3C - 0x43 */
+ u32 rsr; /* 0x44 */
+ u32 rsvd5[2]; /* 0x48 - 0x4F */
+ u32 jtagid; /* 0x50 */
+} siu_t;
+
+typedef struct sdram {
+ u32 mode; /* 0x00 */
+ u32 ctrl; /* 0x04 */
+ u32 cfg1; /* 0x08 */
+ u32 cfg2; /* 0x0c */
+} sdram_t;
+
+typedef struct xlb_arb {
+ u32 cfg; /* 0x240 */
+ u32 ver; /* 0x244 */
+ u32 sr; /* 0x248 */
+ u32 imr; /* 0x24c */
+ u32 adrcap; /* 0x250 */
+ u32 sigcap; /* 0x254 */
+ u32 adrto; /* 0x258 */
+ u32 datto; /* 0x25c */
+ u32 busto; /* 0x260 */
+ u32 prien; /* 0x264 */
+ u32 pri; /* 0x268 */
+} xlbarb_t;
+
+typedef struct int0_ctrl {
+ u32 iprh0; /* 0x00 */
+ u32 iprl0; /* 0x04 */
+ u32 imrh0; /* 0x08 */
+ u32 imrl0; /* 0x0C */
+ u32 frch0; /* 0x10 */
+ u32 frcl0; /* 0x14 */
+ u8 irlr; /* 0x18 */
+ u8 iacklpr; /* 0x19 */
+ u16 res1; /* 0x1A - 0x1B */
+ u32 res2[9]; /* 0x1C - 0x3F */
+ u8 icr0[64]; /* 0x40 - 0x7F */
+ u32 res3[24]; /* 0x80 - 0xDF */
+ u8 swiack0; /* 0xE0 */
+ u8 res4[3]; /* 0xE1 - 0xE3 */
+ u8 Lniack0_1; /* 0xE4 */
+ u8 res5[3]; /* 0xE5 - 0xE7 */
+ u8 Lniack0_2; /* 0xE8 */
+ u8 res6[3]; /* 0xE9 - 0xEB */
+ u8 Lniack0_3; /* 0xEC */
+ u8 res7[3]; /* 0xED - 0xEF */
+ u8 Lniack0_4; /* 0xF0 */
+ u8 res8[3]; /* 0xF1 - 0xF3 */
+ u8 Lniack0_5; /* 0xF4 */
+ u8 res9[3]; /* 0xF5 - 0xF7 */
+ u8 Lniack0_6; /* 0xF8 */
+ u8 resa[3]; /* 0xF9 - 0xFB */
+ u8 Lniack0_7; /* 0xFC */
+ u8 resb[3]; /* 0xFD - 0xFF */
+} int0_t;
+
+typedef struct gptmr {
+ u8 ocpw;
+ u8 octict;
+ u8 ctrl;
+ u8 mode;
+
+ u16 pre; /* Prescale */
+ u16 cnt;
+
+ u16 pwmwidth;
+ u8 pwmop; /* Output Polarity */
+ u8 pwmld; /* Immediate Update */
+
+ u16 cap; /* Capture internal counter */
+ u8 ovfpin; /* Ovf and Pin */
+ u8 intr; /* Interrupts */
+} gptmr_t;
+
+typedef struct slt {
+ u32 tcnt; /* 0x00 */
+ u32 cr; /* 0x04 */
+ u32 cnt; /* 0x08 */
+ u32 sr; /* 0x0C */
+} slt_t;
+
+typedef struct gpio {
+ /* Port Output Data Registers */
+ u8 podr_fbctl; /*0x00 */
+ u8 podr_fbcs; /*0x01 */
+ u8 podr_dma; /*0x02 */
+ u8 rsvd1; /*0x03 */
+ u8 podr_fec0h; /*0x04 */
+ u8 podr_fec0l; /*0x05 */
+ u8 podr_fec1h; /*0x06 */
+ u8 podr_fec1l; /*0x07 */
+ u8 podr_feci2c; /*0x08 */
+ u8 podr_pcibg; /*0x09 */
+ u8 podr_pcibr; /*0x0A */
+ u8 rsvd2; /*0x0B */
+ u8 podr_psc3psc2; /*0x0C */
+ u8 podr_psc1psc0; /*0x0D */
+ u8 podr_dspi; /*0x0E */
+ u8 rsvd3; /*0x0F */
+
+ /* Port Data Direction Registers */
+ u8 pddr_fbctl; /*0x10 */
+ u8 pddr_fbcs; /*0x11 */
+ u8 pddr_dma; /*0x12 */
+ u8 rsvd4; /*0x13 */
+ u8 pddr_fec0h; /*0x14 */
+ u8 pddr_fec0l; /*0x15 */
+ u8 pddr_fec1h; /*0x16 */
+ u8 pddr_fec1l; /*0x17 */
+ u8 pddr_feci2c; /*0x18 */
+ u8 pddr_pcibg; /*0x19 */
+ u8 pddr_pcibr; /*0x1A */
+ u8 rsvd5; /*0x1B */
+ u8 pddr_psc3psc2; /*0x1C */
+ u8 pddr_psc1psc0; /*0x1D */
+ u8 pddr_dspi; /*0x1E */
+ u8 rsvd6; /*0x1F */
+
+ /* Port Pin Data/Set Data Registers */
+ u8 ppdsdr_fbctl; /*0x20 */
+ u8 ppdsdr_fbcs; /*0x21 */
+ u8 ppdsdr_dma; /*0x22 */
+ u8 rsvd7; /*0x23 */
+ u8 ppdsdr_fec0h; /*0x24 */
+ u8 ppdsdr_fec0l; /*0x25 */
+ u8 ppdsdr_fec1h; /*0x26 */
+ u8 ppdsdr_fec1l; /*0x27 */
+ u8 ppdsdr_feci2c; /*0x28 */
+ u8 ppdsdr_pcibg; /*0x29 */
+ u8 ppdsdr_pcibr; /*0x2A */
+ u8 rsvd8; /*0x2B */
+ u8 ppdsdr_psc3psc2; /*0x2C */
+ u8 ppdsdr_psc1psc0; /*0x2D */
+ u8 ppdsdr_dspi; /*0x2E */
+ u8 rsvd9; /*0x2F */
+
+ /* Port Clear Output Data Registers */
+ u8 pclrr_fbctl; /*0x30 */
+ u8 pclrr_fbcs; /*0x31 */
+ u8 pclrr_dma; /*0x32 */
+ u8 rsvd10; /*0x33 */
+ u8 pclrr_fec0h; /*0x34 */
+ u8 pclrr_fec0l; /*0x35 */
+ u8 pclrr_fec1h; /*0x36 */
+ u8 pclrr_fec1l; /*0x37 */
+ u8 pclrr_feci2c; /*0x38 */
+ u8 pclrr_pcibg; /*0x39 */
+ u8 pclrr_pcibr; /*0x3A */
+ u8 rsvd11; /*0x3B */
+ u8 pclrr_psc3psc2; /*0x3C */
+ u8 pclrr_psc1psc0; /*0x3D */
+ u8 pclrr_dspi; /*0x3E */
+ u8 rsvd12; /*0x3F */
+
+ /* Pin Assignment Registers */
+ u16 par_fbctl; /*0x40 */
+ u8 par_fbcs; /*0x42 */
+ u8 par_dma; /*0x43 */
+ u16 par_feci2cirq; /*0x44 */
+ u16 rsvd13; /*0x46 */
+ u16 par_pcibg; /*0x48 */
+ u16 par_pcibr; /*0x4A */
+ u8 par_psc3; /*0x4C */
+ u8 par_psc2; /*0x4D */
+ u8 par_psc1; /*0x4E */
+ u8 par_psc0; /*0x4F */
+ u16 par_dspi; /*0x50 */
+ u8 par_timer; /*0x52 */
+ u8 rsvd14; /*0x53 */
+} gpio_t;
+
+typedef struct pci {
+ u32 idr; /* 0x00 Device Id / Vendor Id */
+ u32 scr; /* 0x04 Status / command */
+ u32 ccrir; /* 0x08 Class Code / Revision Id */
+ u32 cr1; /* 0x0c Configuration 1 */
+ u32 bar0; /* 0x10 Base address register 0 */
+ u32 bar1; /* 0x14 Base address register 1 */
+ u32 bar2; /* 0x18 NA */
+ u32 bar3; /* 0x1c NA */
+ u32 bar4; /* 0x20 NA */
+ u32 bar5; /* 0x24 NA */
+ u32 ccpr; /* 0x28 Cardbus CIS Pointer */
+ u32 sid; /* 0x2c Subsystem ID / Subsystem Vendor ID */
+ u32 erbar; /* 0x30 Expansion ROM Base Address */
+ u32 cpr; /* 0x34 Capabilities Pointer */
+ u32 rsvd1; /* 0x38 */
+ u32 cr2; /* 0x3c Configuration 2 */
+ u32 rsvd2[8]; /* 0x40 - 0x5f */
+
+ /* General control / status registers */
+ u32 gscr; /* 0x60 Global Status / Control */
+ u32 tbatr0a; /* 0x64 Target Base Adr Translation 0 */
+ u32 tbatr1a; /* 0x68 Target Base Adr Translation 1 */
+ u32 tcr1; /* 0x6c Target Control 1 Register */
+ u32 iw0btar; /* 0x70 Initiator Win 0 Base/Translation adr */
+ u32 iw1btar; /* 0x74 Initiator Win 1 Base/Translation adr */
+ u32 iw2btar; /* 0x78 NA */
+ u32 rsvd3; /* 0x7c */
+ u32 iwcr; /* 0x80 Initiator Window Configuration */
+ u32 icr; /* 0x84 Initiator Control */
+ u32 isr; /* 0x88 Initiator Status */
+ u32 tcr2; /* 0x8c NA */
+ u32 tbatr0; /* 0x90 NA */
+ u32 tbatr1; /* 0x94 NA */
+ u32 tbatr2; /* 0x98 NA */
+ u32 tbatr3; /* 0x9c NA */
+ u32 tbatr4; /* 0xa0 NA */
+ u32 tbatr5; /* 0xa4 NA */
+ u32 intr; /* 0xa8 NA */
+ u32 rsvd4[19]; /* 0xac - 0xf7 */
+ u32 car; /* 0xf8 Configuration Address */
+} pci_t;
+
+typedef struct pci_arbiter {
+ /* Pci Arbiter Registers */
+ union {
+ u32 acr; /* Arbiter Control */
+ u32 asr; /* Arbiter Status */
+ };
+} pciarb_t;
+#endif /* __IMMAP_547x_8x__ */
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index 91d7592..33c454a 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -28,19 +28,13 @@
#include <asm/byteorder.h>
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-#define __raw_readb(addr) \
- ({ u8 __v = (*(volatile u8 *) (addr)); __v; })
-#define __raw_readw(addr) \
- ({ u16 __v = (*(volatile u16 *) (addr)); __v; })
-#define __raw_readl(addr) \
- ({ u32 __v = (*(volatile u32 *) (addr)); __v; })
+#define __raw_readb(addr) (*(volatile u8 *)(addr))
+#define __raw_readw(addr) (*(volatile u16 *)(addr))
+#define __raw_readl(addr) (*(volatile u32 *)(addr))
-#define __raw_writeb(addr,b) (void)((*(volatile u8 *) (addr)) = (b))
-#define __raw_writew(addr,w) (void)((*(volatile u16 *) (addr)) = (w))
-#define __raw_writel(addr,l) (void)((*(volatile u32 *) (addr)) = (l))
+#define __raw_writeb(b,addr) ((*(volatile u8 *) (addr)) = (b))
+#define __raw_writew(w,addr) ((*(volatile u16 *) (addr)) = (w))
+#define __raw_writel(l,addr) ((*(volatile u32 *) (addr)) = (l))
#define readb(addr) in_8((volatile u8 *)(addr))
#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
@@ -245,8 +239,8 @@
#define MAP_WRBACK (0)
#define MAP_WRTHROUGH (0)
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+static inline void *map_physmem(phys_addr_t paddr, unsigned long len,
+ unsigned long flags)
{
return (void *)paddr;
}
diff --git a/include/asm-m68k/m5227x.h b/include/asm-m68k/m5227x.h
new file mode 100644
index 0000000..afd31ba
--- /dev/null
+++ b/include/asm-m68k/m5227x.h
@@ -0,0 +1,796 @@
+/*
+ * MCF5227x Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MCF5227X__
+#define __MCF5227X__
+
+/*********************************************************************
+* Interrupt Controller (INTC)
+*********************************************************************/
+#define INT0_LO_RSVD0 (0)
+#define INT0_LO_EPORT1 (1)
+#define INT0_LO_EPORT4 (4)
+#define INT0_LO_EPORT7 (7)
+#define INT0_LO_EDMA_00 (8)
+#define INT0_LO_EDMA_01 (9)
+#define INT0_LO_EDMA_02 (10)
+#define INT0_LO_EDMA_03 (11)
+#define INT0_LO_EDMA_04 (12)
+#define INT0_LO_EDMA_05 (13)
+#define INT0_LO_EDMA_06 (14)
+#define INT0_LO_EDMA_07 (15)
+#define INT0_LO_EDMA_08 (16)
+#define INT0_LO_EDMA_09 (17)
+#define INT0_LO_EDMA_10 (18)
+#define INT0_LO_EDMA_11 (19)
+#define INT0_LO_EDMA_12 (20)
+#define INT0_LO_EDMA_13 (21)
+#define INT0_LO_EDMA_14 (22)
+#define INT0_LO_EDMA_15 (23)
+#define INT0_LO_EDMA_ERR (24)
+#define INT0_LO_SCM_CWIC (25)
+#define INT0_LO_UART0 (26)
+#define INT0_LO_UART1 (27)
+#define INT0_LO_UART2 (28)
+#define INT0_LO_I2C (30)
+#define INT0_LO_DSPI (31)
+#define INT0_HI_DTMR0 (32)
+#define INT0_HI_DTMR1 (33)
+#define INT0_HI_DTMR2 (34)
+#define INT0_HI_DTMR3 (35)
+#define INT0_HI_SCMIR (62)
+#define INT0_HI_RTC_ISR (63)
+
+#define INT1_HI_CAN_BOFFINT (1)
+#define INT1_HI_CAN_ERRINT (3)
+#define INT1_HI_CAN_BUF0I (4)
+#define INT1_HI_CAN_BUF1I (5)
+#define INT1_HI_CAN_BUF2I (6)
+#define INT1_HI_CAN_BUF3I (7)
+#define INT1_HI_CAN_BUF4I (8)
+#define INT1_HI_CAN_BUF5I (9)
+#define INT1_HI_CAN_BUF6I (10)
+#define INT1_HI_CAN_BUF7I (11)
+#define INT1_HI_CAN_BUF8I (12)
+#define INT1_HI_CAN_BUF9I (13)
+#define INT1_HI_CAN_BUF10I (14)
+#define INT1_HI_CAN_BUF11I (15)
+#define INT1_HI_CAN_BUF12I (16)
+#define INT1_HI_CAN_BUF13I (17)
+#define INT1_HI_CAN_BUF14I (18)
+#define INT1_HI_CAN_BUF15I (19)
+#define INT1_HI_PIT0_PIF (43)
+#define INT1_HI_PIT1_PIF (44)
+#define INT1_HI_USBOTG_STS (47)
+#define INT1_HI_SSI_ISR (49)
+#define INT1_HI_PWM_INT (50)
+#define INT1_HI_LCDC_ISR (51)
+#define INT1_HI_CCM_UOCSR (53)
+#define INT1_HI_DSPI_EOQF (54)
+#define INT1_HI_DSPI_TFFF (55)
+#define INT1_HI_DSPI_TCF (56)
+#define INT1_HI_DSPI_TFUF (57)
+#define INT1_HI_DSPI_RFDF (58)
+#define INT1_HI_DSPI_RFOF (59)
+#define INT1_HI_DSPI_RFOF_TFUF (60)
+#define INT1_HI_TOUCH_ADC (61)
+#define INT1_HI_PLL_LOCKS (62)
+
+/* Bit definitions and macros for IPRH */
+#define INTC_IPRH_INT32 (0x00000001)
+#define INTC_IPRH_INT33 (0x00000002)
+#define INTC_IPRH_INT34 (0x00000004)
+#define INTC_IPRH_INT35 (0x00000008)
+#define INTC_IPRH_INT36 (0x00000010)
+#define INTC_IPRH_INT37 (0x00000020)
+#define INTC_IPRH_INT38 (0x00000040)
+#define INTC_IPRH_INT39 (0x00000080)
+#define INTC_IPRH_INT40 (0x00000100)
+#define INTC_IPRH_INT41 (0x00000200)
+#define INTC_IPRH_INT42 (0x00000400)
+#define INTC_IPRH_INT43 (0x00000800)
+#define INTC_IPRH_INT44 (0x00001000)
+#define INTC_IPRH_INT45 (0x00002000)
+#define INTC_IPRH_INT46 (0x00004000)
+#define INTC_IPRH_INT47 (0x00008000)
+#define INTC_IPRH_INT48 (0x00010000)
+#define INTC_IPRH_INT49 (0x00020000)
+#define INTC_IPRH_INT50 (0x00040000)
+#define INTC_IPRH_INT51 (0x00080000)
+#define INTC_IPRH_INT52 (0x00100000)
+#define INTC_IPRH_INT53 (0x00200000)
+#define INTC_IPRH_INT54 (0x00400000)
+#define INTC_IPRH_INT55 (0x00800000)
+#define INTC_IPRH_INT56 (0x01000000)
+#define INTC_IPRH_INT57 (0x02000000)
+#define INTC_IPRH_INT58 (0x04000000)
+#define INTC_IPRH_INT59 (0x08000000)
+#define INTC_IPRH_INT60 (0x10000000)
+#define INTC_IPRH_INT61 (0x20000000)
+#define INTC_IPRH_INT62 (0x40000000)
+#define INTC_IPRH_INT63 (0x80000000)
+
+/* Bit definitions and macros for IPRL */
+#define INTC_IPRL_INT0 (0x00000001)
+#define INTC_IPRL_INT1 (0x00000002)
+#define INTC_IPRL_INT2 (0x00000004)
+#define INTC_IPRL_INT3 (0x00000008)
+#define INTC_IPRL_INT4 (0x00000010)
+#define INTC_IPRL_INT5 (0x00000020)
+#define INTC_IPRL_INT6 (0x00000040)
+#define INTC_IPRL_INT7 (0x00000080)
+#define INTC_IPRL_INT8 (0x00000100)
+#define INTC_IPRL_INT9 (0x00000200)
+#define INTC_IPRL_INT10 (0x00000400)
+#define INTC_IPRL_INT11 (0x00000800)
+#define INTC_IPRL_INT12 (0x00001000)
+#define INTC_IPRL_INT13 (0x00002000)
+#define INTC_IPRL_INT14 (0x00004000)
+#define INTC_IPRL_INT15 (0x00008000)
+#define INTC_IPRL_INT16 (0x00010000)
+#define INTC_IPRL_INT17 (0x00020000)
+#define INTC_IPRL_INT18 (0x00040000)
+#define INTC_IPRL_INT19 (0x00080000)
+#define INTC_IPRL_INT20 (0x00100000)
+#define INTC_IPRL_INT21 (0x00200000)
+#define INTC_IPRL_INT22 (0x00400000)
+#define INTC_IPRL_INT23 (0x00800000)
+#define INTC_IPRL_INT24 (0x01000000)
+#define INTC_IPRL_INT25 (0x02000000)
+#define INTC_IPRL_INT26 (0x04000000)
+#define INTC_IPRL_INT27 (0x08000000)
+#define INTC_IPRL_INT28 (0x10000000)
+#define INTC_IPRL_INT29 (0x20000000)
+#define INTC_IPRL_INT30 (0x40000000)
+#define INTC_IPRL_INT31 (0x80000000)
+
+/* Bit definitions and macros for IMRH */
+#define INTC_IMRH_INT_MASK32 (0x00000001)
+#define INTC_IMRH_INT_MASK33 (0x00000002)
+#define INTC_IMRH_INT_MASK34 (0x00000004)
+#define INTC_IMRH_INT_MASK35 (0x00000008)
+#define INTC_IMRH_INT_MASK36 (0x00000010)
+#define INTC_IMRH_INT_MASK37 (0x00000020)
+#define INTC_IMRH_INT_MASK38 (0x00000040)
+#define INTC_IMRH_INT_MASK39 (0x00000080)
+#define INTC_IMRH_INT_MASK40 (0x00000100)
+#define INTC_IMRH_INT_MASK41 (0x00000200)
+#define INTC_IMRH_INT_MASK42 (0x00000400)
+#define INTC_IMRH_INT_MASK43 (0x00000800)
+#define INTC_IMRH_INT_MASK44 (0x00001000)
+#define INTC_IMRH_INT_MASK45 (0x00002000)
+#define INTC_IMRH_INT_MASK46 (0x00004000)
+#define INTC_IMRH_INT_MASK47 (0x00008000)
+#define INTC_IMRH_INT_MASK48 (0x00010000)
+#define INTC_IMRH_INT_MASK49 (0x00020000)
+#define INTC_IMRH_INT_MASK50 (0x00040000)
+#define INTC_IMRH_INT_MASK51 (0x00080000)
+#define INTC_IMRH_INT_MASK52 (0x00100000)
+#define INTC_IMRH_INT_MASK53 (0x00200000)
+#define INTC_IMRH_INT_MASK54 (0x00400000)
+#define INTC_IMRH_INT_MASK55 (0x00800000)
+#define INTC_IMRH_INT_MASK56 (0x01000000)
+#define INTC_IMRH_INT_MASK57 (0x02000000)
+#define INTC_IMRH_INT_MASK58 (0x04000000)
+#define INTC_IMRH_INT_MASK59 (0x08000000)
+#define INTC_IMRH_INT_MASK60 (0x10000000)
+#define INTC_IMRH_INT_MASK61 (0x20000000)
+#define INTC_IMRH_INT_MASK62 (0x40000000)
+#define INTC_IMRH_INT_MASK63 (0x80000000)
+
+/* Bit definitions and macros for IMRL */
+#define INTC_IMRL_INT_MASK0 (0x00000001)
+#define INTC_IMRL_INT_MASK1 (0x00000002)
+#define INTC_IMRL_INT_MASK2 (0x00000004)
+#define INTC_IMRL_INT_MASK3 (0x00000008)
+#define INTC_IMRL_INT_MASK4 (0x00000010)
+#define INTC_IMRL_INT_MASK5 (0x00000020)
+#define INTC_IMRL_INT_MASK6 (0x00000040)
+#define INTC_IMRL_INT_MASK7 (0x00000080)
+#define INTC_IMRL_INT_MASK8 (0x00000100)
+#define INTC_IMRL_INT_MASK9 (0x00000200)
+#define INTC_IMRL_INT_MASK10 (0x00000400)
+#define INTC_IMRL_INT_MASK11 (0x00000800)
+#define INTC_IMRL_INT_MASK12 (0x00001000)
+#define INTC_IMRL_INT_MASK13 (0x00002000)
+#define INTC_IMRL_INT_MASK14 (0x00004000)
+#define INTC_IMRL_INT_MASK15 (0x00008000)
+#define INTC_IMRL_INT_MASK16 (0x00010000)
+#define INTC_IMRL_INT_MASK17 (0x00020000)
+#define INTC_IMRL_INT_MASK18 (0x00040000)
+#define INTC_IMRL_INT_MASK19 (0x00080000)
+#define INTC_IMRL_INT_MASK20 (0x00100000)
+#define INTC_IMRL_INT_MASK21 (0x00200000)
+#define INTC_IMRL_INT_MASK22 (0x00400000)
+#define INTC_IMRL_INT_MASK23 (0x00800000)
+#define INTC_IMRL_INT_MASK24 (0x01000000)
+#define INTC_IMRL_INT_MASK25 (0x02000000)
+#define INTC_IMRL_INT_MASK26 (0x04000000)
+#define INTC_IMRL_INT_MASK27 (0x08000000)
+#define INTC_IMRL_INT_MASK28 (0x10000000)
+#define INTC_IMRL_INT_MASK29 (0x20000000)
+#define INTC_IMRL_INT_MASK30 (0x40000000)
+#define INTC_IMRL_INT_MASK31 (0x80000000)
+
+/* Bit definitions and macros for INTFRCH */
+#define INTC_INTFRCH_INTFRC32 (0x00000001)
+#define INTC_INTFRCH_INTFRC33 (0x00000002)
+#define INTC_INTFRCH_INTFRC34 (0x00000004)
+#define INTC_INTFRCH_INTFRC35 (0x00000008)
+#define INTC_INTFRCH_INTFRC36 (0x00000010)
+#define INTC_INTFRCH_INTFRC37 (0x00000020)
+#define INTC_INTFRCH_INTFRC38 (0x00000040)
+#define INTC_INTFRCH_INTFRC39 (0x00000080)
+#define INTC_INTFRCH_INTFRC40 (0x00000100)
+#define INTC_INTFRCH_INTFRC41 (0x00000200)
+#define INTC_INTFRCH_INTFRC42 (0x00000400)
+#define INTC_INTFRCH_INTFRC43 (0x00000800)
+#define INTC_INTFRCH_INTFRC44 (0x00001000)
+#define INTC_INTFRCH_INTFRC45 (0x00002000)
+#define INTC_INTFRCH_INTFRC46 (0x00004000)
+#define INTC_INTFRCH_INTFRC47 (0x00008000)
+#define INTC_INTFRCH_INTFRC48 (0x00010000)
+#define INTC_INTFRCH_INTFRC49 (0x00020000)
+#define INTC_INTFRCH_INTFRC50 (0x00040000)
+#define INTC_INTFRCH_INTFRC51 (0x00080000)
+#define INTC_INTFRCH_INTFRC52 (0x00100000)
+#define INTC_INTFRCH_INTFRC53 (0x00200000)
+#define INTC_INTFRCH_INTFRC54 (0x00400000)
+#define INTC_INTFRCH_INTFRC55 (0x00800000)
+#define INTC_INTFRCH_INTFRC56 (0x01000000)
+#define INTC_INTFRCH_INTFRC57 (0x02000000)
+#define INTC_INTFRCH_INTFRC58 (0x04000000)
+#define INTC_INTFRCH_INTFRC59 (0x08000000)
+#define INTC_INTFRCH_INTFRC60 (0x10000000)
+#define INTC_INTFRCH_INTFRC61 (0x20000000)
+#define INTC_INTFRCH_INTFRC62 (0x40000000)
+#define INTC_INTFRCH_INTFRC63 (0x80000000)
+
+/* Bit definitions and macros for INTFRCL */
+#define INTC_INTFRCL_INTFRC0 (0x00000001)
+#define INTC_INTFRCL_INTFRC1 (0x00000002)
+#define INTC_INTFRCL_INTFRC2 (0x00000004)
+#define INTC_INTFRCL_INTFRC3 (0x00000008)
+#define INTC_INTFRCL_INTFRC4 (0x00000010)
+#define INTC_INTFRCL_INTFRC5 (0x00000020)
+#define INTC_INTFRCL_INTFRC6 (0x00000040)
+#define INTC_INTFRCL_INTFRC7 (0x00000080)
+#define INTC_INTFRCL_INTFRC8 (0x00000100)
+#define INTC_INTFRCL_INTFRC9 (0x00000200)
+#define INTC_INTFRCL_INTFRC10 (0x00000400)
+#define INTC_INTFRCL_INTFRC11 (0x00000800)
+#define INTC_INTFRCL_INTFRC12 (0x00001000)
+#define INTC_INTFRCL_INTFRC13 (0x00002000)
+#define INTC_INTFRCL_INTFRC14 (0x00004000)
+#define INTC_INTFRCL_INTFRC15 (0x00008000)
+#define INTC_INTFRCL_INTFRC16 (0x00010000)
+#define INTC_INTFRCL_INTFRC17 (0x00020000)
+#define INTC_INTFRCL_INTFRC18 (0x00040000)
+#define INTC_INTFRCL_INTFRC19 (0x00080000)
+#define INTC_INTFRCL_INTFRC20 (0x00100000)
+#define INTC_INTFRCL_INTFRC21 (0x00200000)
+#define INTC_INTFRCL_INTFRC22 (0x00400000)
+#define INTC_INTFRCL_INTFRC23 (0x00800000)
+#define INTC_INTFRCL_INTFRC24 (0x01000000)
+#define INTC_INTFRCL_INTFRC25 (0x02000000)
+#define INTC_INTFRCL_INTFRC26 (0x04000000)
+#define INTC_INTFRCL_INTFRC27 (0x08000000)
+#define INTC_INTFRCL_INTFRC28 (0x10000000)
+#define INTC_INTFRCL_INTFRC29 (0x20000000)
+#define INTC_INTFRCL_INTFRC30 (0x40000000)
+#define INTC_INTFRCL_INTFRC31 (0x80000000)
+
+/* Bit definitions and macros for ICONFIG */
+#define INTC_ICONFIG_EMASK (0x0020)
+#define INTC_ICONFIG_ELVLPRI1 (0x0200)
+#define INTC_ICONFIG_ELVLPRI2 (0x0400)
+#define INTC_ICONFIG_ELVLPRI3 (0x0800)
+#define INTC_ICONFIG_ELVLPRI4 (0x1000)
+#define INTC_ICONFIG_ELVLPRI5 (0x2000)
+#define INTC_ICONFIG_ELVLPRI6 (0x4000)
+#define INTC_ICONFIG_ELVLPRI7 (0x8000)
+
+/* Bit definitions and macros for SIMR */
+#define INTC_SIMR_SIMR(x) (((x)&0x7F))
+
+/* Bit definitions and macros for CIMR */
+#define INTC_CIMR_CIMR(x) (((x)&0x7F))
+
+/* Bit definitions and macros for CLMASK */
+#define INTC_CLMASK_CLMASK(x) (((x)&0x0F))
+
+/* Bit definitions and macros for SLMASK */
+#define INTC_SLMASK_SLMASK(x) (((x)&0x0F))
+
+/* Bit definitions and macros for ICR group */
+#define INTC_ICR_IL(x) (((x)&0x07))
+
+/*********************************************************************
+* Reset Controller Module (RCM)
+*********************************************************************/
+
+/* Bit definitions and macros for RCR */
+#define RCM_RCR_FRCRSTOUT (0x40)
+#define RCM_RCR_SOFTRST (0x80)
+
+/* Bit definitions and macros for RSR */
+#define RCM_RSR_LOL (0x01)
+#define RCM_RSR_WDR_CORE (0x02)
+#define RCM_RSR_EXT (0x04)
+#define RCM_RSR_POR (0x08)
+#define RCM_RSR_SOFT (0x20)
+
+/*********************************************************************
+* Chip Configuration Module (CCM)
+*********************************************************************/
+
+/* Bit definitions and macros for CCR */
+#define CCM_CCR_DRAMSEL (0x0100)
+#define CCM_CCR_CSC_MASK (0xFF3F)
+#define CCM_CCR_CSC_FBCS5_CS4 (0x00C0)
+#define CCM_CCR_CSC_FBCS5_A22 (0x0080)
+#define CCM_CCR_CSC_FB_A23_A22 (0x0040)
+#define CCM_CCR_LIMP (0x0020)
+#define CCM_CCR_LOAD (0x0010)
+#define CCM_CCR_BOOTPS_MASK (0xFFF3)
+#define CCM_CCR_BOOTPS_PS16 (0x0008)
+#define CCM_CCR_BOOTPS_PS8 (0x0004)
+#define CCM_CCR_BOOTPS_PS32 (0x0000)
+#define CCM_CCR_OSCMODE_OSCBYPASS (0x0002)
+
+/* Bit definitions and macros for RCON */
+#define CCM_RCON_CSC_MASK (0xFF3F)
+#define CCM_RCON_CSC_FBCS5_CS4 (0x00C0)
+#define CCM_RCON_CSC_FBCS5_A22 (0x0080)
+#define CCM_RCON_CSC_FB_A23_A22 (0x0040)
+#define CCM_RCON_LIMP (0x0020)
+#define CCM_RCON_LOAD (0x0010)
+#define CCM_RCON_BOOTPS_MASK (0xFFF3)
+#define CCM_RCON_BOOTPS_PS16 (0x0008)
+#define CCM_RCON_BOOTPS_PS8 (0x0004)
+#define CCM_RCON_BOOTPS_PS32 (0x0000)
+#define CCM_RCON_OSCMODE_OSCBYPASS (0x0002)
+
+/* Bit definitions and macros for CIR */
+#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */
+#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */
+#define CCM_CIR_PIN_MASK (0xFFC0)
+#define CCM_CIR_PRN_MASK (0x003F)
+#define CCM_CIR_PIN_MCF52277 (0x0000)
+
+/* Bit definitions and macros for MISCCR */
+#define CCM_MISCCR_RTCSRC (0x4000)
+#define CCM_MISCCR_USBPUE (0x2000) /* USB transceiver pull-up */
+#define CCM_MISCCR_LIMP (0x1000) /* Limp mode enable */
+
+#define CCM_MISCCR_BME (0x0800) /* Bus monitor ext en bit */
+#define CCM_MISCCR_BMT_65536 (0)
+#define CCM_MISCCR_BMT_32768 (1)
+#define CCM_MISCCR_BMT_16384 (2)
+#define CCM_MISCCR_BMT_8192 (3)
+#define CCM_MISCCR_BMT_4096 (4)
+#define CCM_MISCCR_BMT_2048 (5)
+#define CCM_MISCCR_BMT_1024 (6)
+#define CCM_MISCCR_BMT_512 (7)
+
+#define CCM_MISCCR_SSIPUE (0x0080) /* SSI RXD/TXD pull enable */
+#define CCM_MISCCR_SSIPUS (0x0040) /* SSI RXD/TXD pull select */
+#define CCM_MISCCR_TIMDMA (0x0020) /* Timer DMA mux selection */
+#define CCM_MISCCR_SSISRC (0x0010) /* SSI clock source */
+#define CCM_MISCCR_LCDCHEN (0x0004) /* LCD Int CLK en */
+#define CCM_MISCCR_USBOC (0x0002) /* USB VBUS over-current sense pol */
+#define CCM_MISCCR_USBSRC (0x0001) /* USB clock source */
+
+/* Bit definitions and macros for CDR */
+#define CCM_CDR_USBDIV(x) (((x)&0x0003)<<12)
+#define CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) /* Low power clk div */
+#define CCM_CDR_SSIDIV(x) (((x)&0x00FF)) /* SSI oversampling clk div */
+
+/* Bit definitions and macros for UOCSR */
+#define CCM_UOCSR_DPPD (0x2000) /* D+ 15Kohm pull-down (rd-only) */
+#define CCM_UOCSR_DMPD (0x1000) /* D- 15Kohm pull-down (rd-only) */
+#define CCM_UOCSR_CRG_VBUS (0x0400) /* VBUS charge resistor enabled (rd-only) */
+#define CCM_UOCSR_DCR_VBUS (0x0200) /* VBUS discharge resistor en (rd-only) */
+#define CCM_UOCSR_DPPU (0x0100) /* D+ pull-up for FS enabled (rd-only) */
+#define CCM_UOCSR_AVLD (0x0080) /* A-peripheral valid indicator */
+#define CCM_UOCSR_BVLD (0x0040) /* B-peripheral valid indicator */
+#define CCM_UOCSR_VVLD (0x0020) /* VBUS valid indicator */
+#define CCM_UOCSR_SEND (0x0010) /* Session end */
+#define CCM_UOCSR_WKUP (0x0004) /* USB OTG controller wake-up event */
+#define CCM_UOCSR_UOMIE (0x0002) /* USB OTG misc interrupt en */
+#define CCM_UOCSR_XPDE (0x0001) /* On-chip transceiver pull-down en */
+
+/*********************************************************************
+* General Purpose I/O Module (GPIO)
+*********************************************************************/
+/* Bit definitions and macros for PAR_BE */
+#define GPIO_PAR_BE_MASK (0x0F)
+#define GPIO_PAR_BE_BE3_BE3 (0x08)
+#define GPIO_PAR_BE_BE3_GPIO (0x00)
+#define GPIO_PAR_BE_BE2_BE2 (0x04)
+#define GPIO_PAR_BE_BE2_GPIO (0x00)
+#define GPIO_PAR_BE_BE1_BE1 (0x02)
+#define GPIO_PAR_BE_BE1_GPIO (0x00)
+#define GPIO_PAR_BE_BE0_BE0 (0x01)
+#define GPIO_PAR_BE_BE0_GPIO (0x00)
+
+/* Bit definitions and macros for PAR_CS */
+#define GPIO_PAR_CS_CS3 (0x10)
+#define GPIO_PAR_CS_CS2 (0x08)
+#define GPIO_PAR_CS_CS1_FBCS1 (0x06)
+#define GPIO_PAR_CS_CS1_SDCS1 (0x04)
+#define GPIO_PAR_CS_CS1_GPIO (0x00)
+#define GPIO_PAR_CS_CS0 (0x01)
+
+/* Bit definitions and macros for PAR_FBCTL */
+#define GPIO_PAR_FBCTL_OE (0x80)
+#define GPIO_PAR_FBCTL_TA (0x40)
+#define GPIO_PAR_FBCTL_RW (0x20)
+#define GPIO_PAR_FBCTL_TS_MASK (0xE7)
+#define GPIO_PAR_FBCTL_TS_FBTS (0x18)
+#define GPIO_PAR_FBCTL_TS_DMAACK (0x10)
+#define GPIO_PAR_FBCTL_TS_GPIO (0x00)
+
+/* Bit definitions and macros for PAR_FECI2C */
+#define GPIO_PAR_I2C_SCL_MASK (0xF3)
+#define GPIO_PAR_I2C_SCL_SCL (0x0C)
+#define GPIO_PAR_I2C_SCL_CANTXD (0x08)
+#define GPIO_PAR_I2C_SCL_U2TXD (0x04)
+#define GPIO_PAR_I2C_SCL_GPIO (0x00)
+
+#define GPIO_PAR_I2C_SDA_MASK (0xFC)
+#define GPIO_PAR_I2C_SDA_SDA (0x03)
+#define GPIO_PAR_I2C_SDA_CANRXD (0x02)
+#define GPIO_PAR_I2C_SDA_U2RXD (0x01)
+#define GPIO_PAR_I2C_SDA_GPIO (0x00)
+
+/* Bit definitions and macros for PAR_UART */
+#define GPIO_PAR_UART_U1CTS_MASK (0x3FFF)
+#define GPIO_PAR_UART_U1CTS_U1CTS (0xC000)
+#define GPIO_PAR_UART_U1CTS_SSIBCLK (0x8000)
+#define GPIO_PAR_UART_U1CTS_LCDCLS (0x4000)
+#define GPIO_PAR_UART_U1CTS_GPIO (0x0000)
+
+#define GPIO_PAR_UART_U1RTS_MASK (0xCFFF)
+#define GPIO_PAR_UART_U1RTS_U1RTS (0x3000)
+#define GPIO_PAR_UART_U1RTS_SSIFS (0x2000)
+#define GPIO_PAR_UART_U1RTS_LCDPS (0x1000)
+#define GPIO_PAR_UART_U1RTS_GPIO (0x0000)
+
+#define GPIO_PAR_UART_U1RXD_MASK (0xF3FF)
+#define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00)
+#define GPIO_PAR_UART_U1RXD_SSIRXD (0x0800)
+#define GPIO_PAR_UART_U1RXD_GPIO (0x0000)
+
+#define GPIO_PAR_UART_U1TXD_MASK (0xFCFF)
+#define GPIO_PAR_UART_U1TXD_U1TXD (0x0300)
+#define GPIO_PAR_UART_U1TXD_SSITXD (0x0200)
+#define GPIO_PAR_UART_U1TXD_GPIO (0x0000)
+
+#define GPIO_PAR_UART_U0CTS_MASK (0xFF3F)
+#define GPIO_PAR_UART_U0CTS_U0CTS (0x00C0)
+#define GPIO_PAR_UART_U0CTS_T1OUT (0x0080)
+#define GPIO_PAR_UART_U0CTS_USBVBUSEN (0x0040)
+#define GPIO_PAR_UART_U0CTS_GPIO (0x0000)
+
+#define GPIO_PAR_UART_U0RTS_MASK (0xFFCF)
+#define GPIO_PAR_UART_U0RTS_U0RTS (0x0030)
+#define GPIO_PAR_UART_U0RTS_T1IN (0x0020)
+#define GPIO_PAR_UART_U0RTS_USBVBUSOC (0x0010)
+#define GPIO_PAR_UART_U0RTS_GPIO (0x0000)
+
+#define GPIO_PAR_UART_U0RXD_MASK (0xFFF3)
+#define GPIO_PAR_UART_U0RXD_U0RXD (0x000C)
+#define GPIO_PAR_UART_U0RXD_CANRX (0x0008)
+#define GPIO_PAR_UART_U0RXD_GPIO (0x0000)
+
+#define GPIO_PAR_UART_U0TXD_MASK (0xFFFC)
+#define GPIO_PAR_UART_U0TXD_U0TXD (0x0003)
+#define GPIO_PAR_UART_U0TXD_CANTX (0x0002)
+#define GPIO_PAR_UART_U0TXD_GPIO (0x0000)
+
+/* Bit definitions and macros for PAR_DSPI */
+#define GPIO_PAR_DSPI_PCS0_MASK (0x3F)
+#define GPIO_PAR_DSPI_PCS0_PCS0 (0x80)
+#define GPIO_PAR_DSPI_PCS0_U2RTS (0x40)
+#define GPIO_PAR_DSPI_PCS0_GPIO (0x00)
+#define GPIO_PAR_DSPI_SIN_MASK (0xCF)
+#define GPIO_PAR_DSPI_SIN_SIN (0x30)
+#define GPIO_PAR_DSPI_SIN_U2RXD (0x20)
+#define GPIO_PAR_DSPI_SIN_GPIO (0x00)
+#define GPIO_PAR_DSPI_SOUT_MASK (0xF3)
+#define GPIO_PAR_DSPI_SOUT_SOUT (0x0C)
+#define GPIO_PAR_DSPI_SOUT_U2TXD (0x08)
+#define GPIO_PAR_DSPI_SOUT_GPIO (0x00)
+#define GPIO_PAR_DSPI_SCK_MASK (0xFC)
+#define GPIO_PAR_DSPI_SCK_SCK (0x03)
+#define GPIO_PAR_DSPI_SCK_U2CTS (0x02)
+#define GPIO_PAR_DSPI_SCK_GPIO (0x00)
+
+/* Bit definitions and macros for PAR_TIMER */
+#define GPIO_PAR_TIMER_T3IN_MASK (0x3F)
+#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0)
+#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80)
+#define GPIO_PAR_TIMER_T3IN_SSIMCLK (0x40)
+#define GPIO_PAR_TIMER_T3IN_GPIO (0x00)
+#define GPIO_PAR_TIMER_T2IN_MASK (0xCF)
+#define GPIO_PAR_TIMER_T2IN_T2IN (0x30)
+#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20)
+#define GPIO_PAR_TIMER_T2IN_DSPIPCS2 (0x10)
+#define GPIO_PAR_TIMER_T2IN_GPIO (0x00)
+#define GPIO_PAR_TIMER_T1IN_MASK (0xF3)
+#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C)
+#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08)
+#define GPIO_PAR_TIMER_T1IN_LCDCONTRAST (0x04)
+#define GPIO_PAR_TIMER_T1IN_GPIO (0x00)
+#define GPIO_PAR_TIMER_T0IN_MASK (0xFC)
+#define GPIO_PAR_TIMER_T0IN_T0IN (0x03)
+#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02)
+#define GPIO_PAR_TIMER_T0IN_LCDREV (0x01)
+#define GPIO_PAR_TIMER_T0IN_GPIO (0x00)
+
+/* Bit definitions and macros for GPIO_PAR_LCDCTL */
+#define GPIO_PAR_LCDCTL_ACDOE_MASK (0xE7)
+#define GPIO_PAR_LCDCTL_ACDOE_ACDOE (0x18)
+#define GPIO_PAR_LCDCTL_ACDOE_SPLSPR (0x10)
+#define GPIO_PAR_LCDCTL_ACDOE_GPIO (0x00)
+#define GPIO_PAR_LCDCTL_FLM_VSYNC (0x04)
+#define GPIO_PAR_LCDCTL_LP_HSYNC (0x02)
+#define GPIO_PAR_LCDCTL_LSCLK (0x01)
+
+/* Bit definitions and macros for PAR_IRQ */
+#define GPIO_PAR_IRQ_IRQ4_MASK (0xF3)
+#define GPIO_PAR_IRQ_IRQ4_SSIINPCLK (0x0C)
+#define GPIO_PAR_IRQ_IRQ4_DMAREQ0 (0x08)
+#define GPIO_PAR_IRQ_IRQ4_GPIO (0x00)
+#define GPIO_PAR_IRQ_IRQ1_MASK (0xFC)
+#define GPIO_PAR_IRQ_IRQ1_PCIINT (0x03)
+#define GPIO_PAR_IRQ_IRQ1_USBCLKIN (0x02)
+#define GPIO_PAR_IRQ_IRQ1_SSICLKIN (0x01)
+#define GPIO_PAR_IRQ_IRQ1_GPIO (0x00)
+
+/* Bit definitions and macros for GPIO_PAR_LCDH */
+#define GPIO_PAR_LCDH_LD17_MASK (0xFFFFF3FF)
+#define GPIO_PAR_LCDH_LD17_LD17 (0x00000C00)
+#define GPIO_PAR_LCDH_LD17_LD11 (0x00000800)
+#define GPIO_PAR_LCDH_LD17_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDH_LD16_MASK (0xFFFFFCFF)
+#define GPIO_PAR_LCDH_LD16_LD16 (0x00000300)
+#define GPIO_PAR_LCDH_LD16_LD10 (0x00000200)
+#define GPIO_PAR_LCDH_LD16_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDH_LD15_MASK (0xFFFFFF3F)
+#define GPIO_PAR_LCDH_LD15_LD15 (0x000000C0)
+#define GPIO_PAR_LCDH_LD15_LD9 (0x00000080)
+#define GPIO_PAR_LCDH_LD15_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDH_LD14_MASK (0xFFFFFFCF)
+#define GPIO_PAR_LCDH_LD14_LD14 (0x00000030)
+#define GPIO_PAR_LCDH_LD14_LD8 (0x00000020)
+#define GPIO_PAR_LCDH_LD14_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDH_LD13_MASK (0xFFFFFFF3)
+#define GPIO_PAR_LCDH_LD13_LD13 (0x0000000C)
+#define GPIO_PAR_LCDH_LD13_CANTX (0x00000008)
+#define GPIO_PAR_LCDH_LD13_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDH_LD12_MASK (0xFFFFFFFC)
+#define GPIO_PAR_LCDH_LD12_LD12 (0x00000003)
+#define GPIO_PAR_LCDH_LD12_CANRX (0x00000002)
+#define GPIO_PAR_LCDH_LD12_GPIO (0x00000000)
+
+/* Bit definitions and macros for GPIO_PAR_LCDL */
+#define GPIO_PAR_LCDL_LD11_MASK (0x3FFFFFFF)
+#define GPIO_PAR_LCDL_LD11_LD11 (0xC0000000)
+#define GPIO_PAR_LCDL_LD11_LD7 (0x80000000)
+#define GPIO_PAR_LCDL_LD11_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD10_MASK (0xCFFFFFFF)
+#define GPIO_PAR_LCDL_LD10_LD10 (0x30000000)
+#define GPIO_PAR_LCDL_LD10_LD6 (0x20000000)
+#define GPIO_PAR_LCDL_LD10_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD9_MASK (0xF3FFFFFF)
+#define GPIO_PAR_LCDL_LD9_LD9 (0x0C000000)
+#define GPIO_PAR_LCDL_LD9_LD5 (0x08000000)
+#define GPIO_PAR_LCDL_LD9_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD8_MASK (0xFCFFFFFF)
+#define GPIO_PAR_LCDL_LD8_LD8 (0x03000000)
+#define GPIO_PAR_LCDL_LD8_LD4 (0x02000000)
+#define GPIO_PAR_LCDL_LD8_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD7_MASK (0xFF3FFFFF)
+#define GPIO_PAR_LCDL_LD7_LD7 (0x00C00000)
+#define GPIO_PAR_LCDL_LD7_PWM7 (0x00800000)
+#define GPIO_PAR_LCDL_LD7_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD6_MASK (0xFFCFFFFF)
+#define GPIO_PAR_LCDL_LD6_LD6 (0x00300000)
+#define GPIO_PAR_LCDL_LD6_PWM5 (0x00200000)
+#define GPIO_PAR_LCDL_LD6_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD5_MASK (0xFFF3FFFF)
+#define GPIO_PAR_LCDL_LD5_LD5 (0x000C0000)
+#define GPIO_PAR_LCDL_LD5_LD3 (0x00080000)
+#define GPIO_PAR_LCDL_LD5_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD4_MASK (0xFFFCFFFF)
+#define GPIO_PAR_LCDL_LD4_LD4 (0x00030000)
+#define GPIO_PAR_LCDL_LD4_LD2 (0x00020000)
+#define GPIO_PAR_LCDL_LD4_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD3_MASK (0xFFFF3FFF)
+#define GPIO_PAR_LCDL_LD3_LD3 (0x0000C000)
+#define GPIO_PAR_LCDL_LD3_LD1 (0x00008000)
+#define GPIO_PAR_LCDL_LD3_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD2_MASK (0xFFFFCFFF)
+#define GPIO_PAR_LCDL_LD2_LD2 (0x00003000)
+#define GPIO_PAR_LCDL_LD2_LD0 (0x00002000)
+#define GPIO_PAR_LCDL_LD2_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD1_MASK (0xFFFFF3FF)
+#define GPIO_PAR_LCDL_LD1_LD1 (0x00000C00)
+#define GPIO_PAR_LCDL_LD1_PWM3 (0x00000800)
+#define GPIO_PAR_LCDL_LD1_GPIO (0x00000000)
+
+#define GPIO_PAR_LCDL_LD0_MASK (0xFFFFFCFF)
+#define GPIO_PAR_LCDL_LD0_LD0 (0x00000300)
+#define GPIO_PAR_LCDL_LD0_PWM1 (0x00000200)
+#define GPIO_PAR_LCDL_LD0_GPIO (0x00000000)
+
+/* Bit definitions and macros for MSCR_FB */
+#define GPIO_MSCR_FB_DUPPER_MASK (0xCF)
+#define GPIO_MSCR_FB_DUPPER_25V_33V (0x30)
+#define GPIO_MSCR_FB_DUPPER_FULL_18V (0x20)
+#define GPIO_MSCR_FB_DUPPER_OD (0x10)
+#define GPIO_MSCR_FB_DUPPER_HALF_18V (0x00)
+
+#define GPIO_MSCR_FB_DLOWER_MASK (0xF3)
+#define GPIO_MSCR_FB_DLOWER_25V_33V (0x0C)
+#define GPIO_MSCR_FB_DLOWER_FULL_18V (0x08)
+#define GPIO_MSCR_FB_DLOWER_OD (0x04)
+#define GPIO_MSCR_FB_DLOWER_HALF_18V (0x00)
+
+#define GPIO_MSCR_FB_ADDRCTL_MASK (0xFC)
+#define GPIO_MSCR_FB_ADDRCTL_25V_33V (0x03)
+#define GPIO_MSCR_FB_ADDRCTL_FULL_18V (0x02)
+#define GPIO_MSCR_FB_ADDRCTL_OD (0x01)
+#define GPIO_MSCR_FB_ADDRCTL_HALF_18V (0x00)
+
+/* Bit definitions and macros for MSCR_SDRAM */
+#define GPIO_MSCR_SDRAM_SDCLKB_MASK (0xCF)
+#define GPIO_MSCR_SDRAM_SDCLKB_25V_33V (0x30)
+#define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V (0x20)
+#define GPIO_MSCR_SDRAM_SDCLKB_OD (0x10)
+#define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V (0x00)
+
+#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3)
+#define GPIO_MSCR_SDRAM_SDCLK_25V_33V (0x0C)
+#define GPIO_MSCR_SDRAM_SDCLK_FULL_18V (0x08)
+#define GPIO_MSCR_SDRAM_SDCLK_OPD (0x04)
+#define GPIO_MSCR_SDRAM_SDCLK_HALF_18V (0x00)
+
+#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC)
+#define GPIO_MSCR_SDRAM_SDCTL_25V_33V (0x03)
+#define GPIO_MSCR_SDRAM_SDCTL_FULL_18V (0x02)
+#define GPIO_MSCR_SDRAM_SDCTL_OPD (0x01)
+#define GPIO_MSCR_SDRAM_SDCTL_HALF_18V (0x00)
+
+/* Bit definitions and macros for Drive Strength Control */
+#define DSCR_LOAD_50PF (0x03)
+#define DSCR_LOAD_30PF (0x02)
+#define DSCR_LOAD_20PF (0x01)
+#define DSCR_LOAD_10PF (0x00)
+
+/*********************************************************************
+* SDRAM Controller (SDRAMC)
+*********************************************************************/
+
+/* Bit definitions and macros for SDMR */
+#define SDRAMC_SDMR_DDR2_AD(x) (((x)&0x00003FFF)) /* Address for DDR2 */
+#define SDRAMC_SDMR_CMD (0x00010000) /* Command */
+#define SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) /* Address */
+#define SDRAMC_SDMR_BK(x) (((x)&0x00000003)<<30) /* Bank Address */
+#define SDRAMC_SDMR_BK_LMR (0x00000000)
+#define SDRAMC_SDMR_BK_LEMR (0x40000000)
+
+/* Bit definitions and macros for SDCR */
+#define SDRAMC_SDCR_DPD (0x00000001) /* Deep Power-Down Mode */
+#define SDRAMC_SDCR_IPALL (0x00000002) /* Initiate Precharge All */
+#define SDRAMC_SDCR_IREF (0x00000004) /* Initiate Refresh */
+#define SDRAMC_SDCR_DQS_OE(x) (((x)&0x00000003)<<10) /* DQS Output Enable */
+#define SDRAMC_SDCR_MEM_PS (0x00002000) /* Data Port Size */
+#define SDRAMC_SDCR_REF_CNT(x) (((x)&0x0000003F)<<16) /* Periodic Refresh Counter */
+#define SDRAMC_SDCR_OE_RULE (0x00400000) /* Drive Rule Selection */
+#define SDRAMC_SDCR_ADDR_MUX(x) (((x)&0x00000003)<<24) /* Internal Address Mux Select */
+#define SDRAMC_SDCR_DDR2_MODE (0x08000000) /* DDR2 Mode Select */
+#define SDRAMC_SDCR_REF_EN (0x10000000) /* Refresh Enable */
+#define SDRAMC_SDCR_DDR_MODE (0x20000000) /* DDR Mode Select */
+#define SDRAMC_SDCR_CKE (0x40000000) /* Clock Enable */
+#define SDRAMC_SDCR_MODE_EN (0x80000000) /* SDRAM Mode Register Programming Enable */
+#define SDRAMC_SDCR_DQS_OE_BOTH (0x00000C000)
+
+/* Bit definitions and macros for SDCFG1 */
+#define SDRAMC_SDCFG1_WT_LAT(x) (((x)&0x00000007)<<4) /* Write Latency */
+#define SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) /* Refresh to active delay */
+#define SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) /* Precharge to active delay */
+#define SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) /* Active to read/write delay */
+#define SDRAMC_SDCFG1_RD_LAT(x) (((x)&0x0000000F)<<20) /* Read CAS Latency */
+#define SDRAMC_SDCFG1_SWT2RWP(x) (((x)&0x00000007)<<24) /* Single write to read/write/precharge delay */
+#define SDRAMC_SDCFG1_SRD2RWP(x) (((x)&0x0000000F)<<28) /* Single read to read/write/precharge delay */
+
+/* Bit definitions and macros for SDCFG2 */
+#define SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) /* Burst Length */
+#define SDRAMC_SDCFG2_BRD2W(x) (((x)&0x0000000F)<<20) /* Burst read to write delay */
+#define SDRAMC_SDCFG2_BWT2RWP(x) (((x)&0x0000000F)<<24) /* Burst write to read/write/precharge delay */
+#define SDRAMC_SDCFG2_BRD2RP(x) (((x)&0x0000000F)<<28) /* Burst read to read/precharge delay */
+
+/* Bit definitions and macros for SDCS group */
+#define SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)) /* Chip-Select Size */
+#define SDRAMC_SDCS_CSBA(x) (((x)&0x00000FFF)<<20) /* Chip-Select Base Address */
+#define SDRAMC_SDCS_BA(x) ((x)&0xFFF00000)
+#define SDRAMC_SDCS_CSSZ_DISABLE (0x00000000)
+#define SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013)
+#define SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014)
+#define SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015)
+#define SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016)
+#define SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017)
+#define SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018)
+#define SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019)
+#define SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A)
+#define SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B)
+#define SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C)
+#define SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D)
+#define SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E)
+#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
+
+/*********************************************************************
+* Phase Locked Loop (PLL)
+*********************************************************************/
+
+/* Bit definitions and macros for PCR */
+#define PLL_PCR_OUTDIV1(x) (((x)&0x0000000F)) /* Output divider for CPU clock frequency */
+#define PLL_PCR_OUTDIV2(x) (((x)&0x0000000F)<<4) /* Output divider for bus/flexbus clock frequency */
+#define PLL_PCR_OUTDIV3(x) (((x)&0x0000000F)<<8) /* Output divider for SDRAM clock frequency */
+#define PLL_PCR_OUTDIV5(x) (((x)&0x0000000F)<<16) /* Output divider for USB clock frequency */
+#define PLL_PCR_PFDR(x) (((x)&0x000000FF)<<24) /* Feedback divider for VCO frequency */
+#define PLL_PCR_PFDR_MASK (0x000F0000)
+#define PLL_PCR_OUTDIV5_MASK (0x000F0000)
+#define PLL_PCR_OUTDIV3_MASK (0x00000F00)
+#define PLL_PCR_OUTDIV2_MASK (0x000000F0)
+#define PLL_PCR_OUTDIV1_MASK (0x0000000F)
+
+/* Bit definitions and macros for PSR */
+#define PLL_PSR_LOCKS (0x00000001) /* PLL lost lock - sticky */
+#define PLL_PSR_LOCK (0x00000002) /* PLL lock status */
+#define PLL_PSR_LOLIRQ (0x00000004) /* PLL loss-of-lock interrupt enable */
+#define PLL_PSR_LOLRE (0x00000008) /* PLL loss-of-lock reset enable */
+
+/********************************************************************/
+
+#endif /* __MCF5227X__ */
diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h
index 3f05651..c1669dc 100644
--- a/include/asm-m68k/m5329.h
+++ b/include/asm-m68k/m5329.h
@@ -1118,6 +1118,7 @@
#define GPIO_PCLRR_LCDCTLL7 (0x80)
/* Bit definitions and macros for GPIO_PAR_FEC */
+#ifdef CONFIG_M5329
#define GPIO_PAR_FEC_MII(x) (((x)&0x03)<<0)
#define GPIO_PAR_FEC_7W(x) (((x)&0x03)<<2)
#define GPIO_PAR_FEC_7W_GPIO (0x00)
@@ -1126,6 +1127,10 @@
#define GPIO_PAR_FEC_MII_GPIO (0x00)
#define GPIO_PAR_FEC_MII_UART (0x01)
#define GPIO_PAR_FEC_MII_FEC (0x03)
+#else
+#define GPIO_PAR_FEC_7W_FEC (0x08)
+#define GPIO_PAR_FEC_MII_FEC (0x02)
+#endif
/* Bit definitions and macros for GPIO_PAR_PWM */
#define GPIO_PAR_PWM1(x) (((x)&0x03)<<0)
@@ -1315,168 +1320,6 @@
/* Bit definitions and macros for GPIO_DSCR_IRQ */
#define GPIO_DSCR_IRQ_DSE(x) ((x)&0x03)
-/* not done yet */
-/*********************************************************************
-* LCD Controller (LCDC)
-*********************************************************************/
-/* Bit definitions and macros for LCDC_LSSAR */
-#define LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for LCDC_LSR */
-#define LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0)
-#define LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for LCDC_LVPWR */
-#define LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for LCDC_LCPR */
-#define LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0)
-#define LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16)
-#define LCDC_LCPR_OP (0x10000000)
-#define LCDC_LCPR_CC(x) (((x)&0x00000003)<<30)
-#define LCDC_LCPR_CC_TRANSPARENT (0x00000000)
-#define LCDC_LCPR_CC_OR (0x40000000)
-#define LCDC_LCPR_CC_XOR (0x80000000)
-#define LCDC_LCPR_CC_AND (0xC0000000)
-#define LCDC_LCPR_OP_ON (0x10000000)
-#define LCDC_LCPR_OP_OFF (0x00000000)
-
-/* Bit definitions and macros for LCDC_LCWHBR */
-#define LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0)
-#define LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16)
-#define LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24)
-#define LCDC_LCWHBR_BK_EN (0x80000000)
-#define LCDC_LCWHBR_BK_EN_ON (0x80000000)
-#define LCDC_LCWHBR_BK_EN_OFF (0x00000000)
-
-/* Bit definitions and macros for LCDC_LCCMR */
-#define LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0)
-#define LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6)
-#define LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12)
-
-/* Bit definitions and macros for LCDC_LPCR */
-#define LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0)
-#define LCDC_LPCR_SHARP (0x00000040)
-#define LCDC_LPCR_SCLKSEL (0x00000080)
-#define LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8)
-#define LCDC_LPCR_ACDSEL (0x00008000)
-#define LCDC_LPCR_REV_VS (0x00010000)
-#define LCDC_LPCR_SWAP_SEL (0x00020000)
-#define LCDC_LPCR_ENDSEL (0x00040000)
-#define LCDC_LPCR_SCLKIDLE (0x00080000)
-#define LCDC_LPCR_OEPOL (0x00100000)
-#define LCDC_LPCR_CLKPOL (0x00200000)
-#define LCDC_LPCR_LPPOL (0x00400000)
-#define LCDC_LPCR_FLM (0x00800000)
-#define LCDC_LPCR_PIXPOL (0x01000000)
-#define LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25)
-#define LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28)
-#define LCDC_LPCR_COLOR (0x40000000)
-#define LCDC_LPCR_TFT (0x80000000)
-#define LCDC_LPCR_MODE_MONOCHROME (0x00000000)
-#define LCDC_LPCR_MODE_CSTN (0x40000000)
-#define LCDC_LPCR_MODE_TFT (0xC0000000)
-#define LCDC_LPCR_PBSIZ_1 (0x00000000)
-#define LCDC_LPCR_PBSIZ_2 (0x10000000)
-#define LCDC_LPCR_PBSIZ_4 (0x20000000)
-#define LCDC_LPCR_PBSIZ_8 (0x30000000)
-#define LCDC_LPCR_BPIX_1bpp (0x00000000)
-#define LCDC_LPCR_BPIX_2bpp (0x02000000)
-#define LCDC_LPCR_BPIX_4bpp (0x04000000)
-#define LCDC_LPCR_BPIX_8bpp (0x06000000)
-#define LCDC_LPCR_BPIX_12bpp (0x08000000)
-#define LCDC_LPCR_BPIX_16bpp (0x0A000000)
-#define LCDC_LPCR_BPIX_18bpp (0x0C000000)
-
-#define LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30)
-
-/* Bit definitions and macros for LCDC_LHCR */
-#define LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0)
-#define LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8)
-#define LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for LCDC_LVCR */
-#define LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0)
-#define LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8)
-#define LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for LCDC_LPOR */
-#define LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for LCDC_LPCCR */
-#define LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0)
-#define LCDC_LPCCR_CC_EN (0x00000100)
-#define LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9)
-#define LCDC_LPCCR_LDMSK (0x00008000)
-#define LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16)
-#define LCDC_LPCCR_SCR_LINEPULSE (0x00000000)
-#define LCDC_LPCCR_SCR_PIXELCLK (0x00002000)
-#define LCDC_LPCCR_SCR_LCDCLOCK (0x00004000)
-
-/* Bit definitions and macros for LCDC_LDCR */
-#define LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0)
-#define LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16)
-#define LCDC_LDCR_BURST (0x80000000)
-
-/* Bit definitions and macros for LCDC_LRMCR */
-#define LCDC_LRMCR_SEL_REF (0x00000001)
-
-/* Bit definitions and macros for LCDC_LICR */
-#define LCDC_LICR_INTCON (0x00000001)
-#define LCDC_LICR_INTSYN (0x00000004)
-#define LCDC_LICR_GW_INT_CON (0x00000010)
-
-/* Bit definitions and macros for LCDC_LIER */
-#define LCDC_LIER_BOF_EN (0x00000001)
-#define LCDC_LIER_EOF_EN (0x00000002)
-#define LCDC_LIER_ERR_RES_EN (0x00000004)
-#define LCDC_LIER_UDR_ERR_EN (0x00000008)
-#define LCDC_LIER_GW_BOF_EN (0x00000010)
-#define LCDC_LIER_GW_EOF_EN (0x00000020)
-#define LCDC_LIER_GW_ERR_RES_EN (0x00000040)
-#define LCDC_LIER_GW_UDR_ERR_EN (0x00000080)
-
-/* Bit definitions and macros for LCDC_LISR */
-#define LCDC_LISR_BOF (0x00000001)
-#define LCDC_LISR_EOF (0x00000002)
-#define LCDC_LISR_ERR_RES (0x00000004)
-#define LCDC_LISR_UDR_ERR (0x00000008)
-#define LCDC_LISR_GW_BOF (0x00000010)
-#define LCDC_LISR_GW_EOF (0x00000020)
-#define LCDC_LISR_GW_ERR_RES (0x00000040)
-#define LCDC_LISR_GW_UDR_ERR (0x00000080)
-
-/* Bit definitions and macros for LCDC_LGWSAR */
-#define LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for LCDC_LGWSR */
-#define LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0)
-#define LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for LCDC_LGWVPWR */
-#define LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for LCDC_LGWPOR */
-#define LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for LCDC_LGWPR */
-#define LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0)
-#define LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16)
-
-/* Bit definitions and macros for LCDC_LGWCR */
-#define LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0)
-#define LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6)
-#define LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12)
-#define LCDC_LGWCR_GW_RVS (0x00200000)
-#define LCDC_LGWCR_GWE (0x00400000)
-#define LCDC_LGWCR_GWCKE (0x00800000)
-#define LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24)
-
-/* Bit definitions and macros for LCDC_LGWDCR */
-#define LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0)
-#define LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16)
-#define LCDC_LGWDCR_GWBT (0x80000000)
-
/*********************************************************************
* SDRAM Controller (SDRAMC)
*********************************************************************/
@@ -1541,125 +1384,6 @@
#define SDRAMC_SDCS_CSSZ_DIABLE (0x00000000)
/*********************************************************************
-* Synchronous Serial Interface (SSI)
-*********************************************************************/
-/* Bit definitions and macros for SSI_CR */
-#define SSI_CR_CIS (0x00000200)
-#define SSI_CR_TCH (0x00000100)
-#define SSI_CR_MCE (0x00000080)
-#define SSI_CR_I2S_SLAVE (0x00000040)
-#define SSI_CR_I2S_MASTER (0x00000020)
-#define SSI_CR_I2S_NORMAL (0x00000000)
-#define SSI_CR_SYN (0x00000010)
-#define SSI_CR_NET (0x00000008)
-#define SSI_CR_RE (0x00000004)
-#define SSI_CR_TE (0x00000002)
-#define SSI_CR_SSI_EN (0x00000001)
-
-/* Bit definitions and macros for SSI_ISR */
-#define SSI_ISR_CMDAU (0x00040000)
-#define SSI_ISR_CMDDU (0x00020000)
-#define SSI_ISR_RXT (0x00010000)
-#define SSI_ISR_RDR1 (0x00008000)
-#define SSI_ISR_RDR0 (0x00004000)
-#define SSI_ISR_TDE1 (0x00002000)
-#define SSI_ISR_TDE0 (0x00001000)
-#define SSI_ISR_ROE1 (0x00000800)
-#define SSI_ISR_ROE0 (0x00000400)
-#define SSI_ISR_TUE1 (0x00000200)
-#define SSI_ISR_TUE0 (0x00000100)
-#define SSI_ISR_TFS (0x00000080)
-#define SSI_ISR_RFS (0x00000040)
-#define SSI_ISR_TLS (0x00000020)
-#define SSI_ISR_RLS (0x00000010)
-#define SSI_ISR_RFF1 (0x00000008)
-#define SSI_ISR_RFF0 (0x00000004)
-#define SSI_ISR_TFE1 (0x00000002)
-#define SSI_ISR_TFE0 (0x00000001)
-
-/* Bit definitions and macros for SSI_IER */
-#define SSI_IER_RDMAE (0x00400000)
-#define SSI_IER_RIE (0x00200000)
-#define SSI_IER_TDMAE (0x00100000)
-#define SSI_IER_TIE (0x00080000)
-#define SSI_IER_CMDAU (0x00040000)
-#define SSI_IER_CMDU (0x00020000)
-#define SSI_IER_RXT (0x00010000)
-#define SSI_IER_RDR1 (0x00008000)
-#define SSI_IER_RDR0 (0x00004000)
-#define SSI_IER_TDE1 (0x00002000)
-#define SSI_IER_TDE0 (0x00001000)
-#define SSI_IER_ROE1 (0x00000800)
-#define SSI_IER_ROE0 (0x00000400)
-#define SSI_IER_TUE1 (0x00000200)
-#define SSI_IER_TUE0 (0x00000100)
-#define SSI_IER_TFS (0x00000080)
-#define SSI_IER_RFS (0x00000040)
-#define SSI_IER_TLS (0x00000020)
-#define SSI_IER_RLS (0x00000010)
-#define SSI_IER_RFF1 (0x00000008)
-#define SSI_IER_RFF0 (0x00000004)
-#define SSI_IER_TFE1 (0x00000002)
-#define SSI_IER_TFE0 (0x00000001)
-
-/* Bit definitions and macros for SSI_TCR */
-#define SSI_TCR_TXBIT0 (0x00000200)
-#define SSI_TCR_TFEN1 (0x00000100)
-#define SSI_TCR_TFEN0 (0x00000080)
-#define SSI_TCR_TFDIR (0x00000040)
-#define SSI_TCR_TXDIR (0x00000020)
-#define SSI_TCR_TSHFD (0x00000010)
-#define SSI_TCR_TSCKP (0x00000008)
-#define SSI_TCR_TFSI (0x00000004)
-#define SSI_TCR_TFSL (0x00000002)
-#define SSI_TCR_TEFS (0x00000001)
-
-/* Bit definitions and macros for SSI_RCR */
-#define SSI_RCR_RXEXT (0x00000400)
-#define SSI_RCR_RXBIT0 (0x00000200)
-#define SSI_RCR_RFEN1 (0x00000100)
-#define SSI_RCR_RFEN0 (0x00000080)
-#define SSI_RCR_RSHFD (0x00000010)
-#define SSI_RCR_RSCKP (0x00000008)
-#define SSI_RCR_RFSI (0x00000004)
-#define SSI_RCR_RFSL (0x00000002)
-#define SSI_RCR_REFS (0x00000001)
-
-/* Bit definitions and macros for SSI_CCR */
-#define SSI_CCR_DIV2 (0x00040000)
-#define SSI_CCR_PSR (0x00020000)
-#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13)
-#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8)
-#define SSI_CCR_PM(x) ((x)&0x000000FF)
-
-/* Bit definitions and macros for SSI_FCSR */
-#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28)
-#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24)
-#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20)
-#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16)
-#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12)
-#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8)
-#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4)
-#define SSI_FCSR_TFWM0(x) ((x)&0x0000000F)
-
-/* Bit definitions and macros for SSI_ACR */
-#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5)
-#define SSI_ACR_WR (0x00000010)
-#define SSI_ACR_RD (0x00000008)
-#define SSI_ACR_TIF (0x00000004)
-#define SSI_ACR_FV (0x00000002)
-#define SSI_ACR_AC97EN (0x00000001)
-
-/* Bit definitions and macros for SSI_ACADD */
-#define SSI_ACADD_SSI_ACADD(x) ((x)&0x0007FFFF)
-
-/* Bit definitions and macros for SSI_ACDAT */
-#define SSI_ACDAT_SSI_ACDAT(x) ((x)&0x0007FFFF)
-
-/* Bit definitions and macros for SSI_ATAG */
-#define SSI_ATAG_DDI_ATAG(x) ((x)&0x0000FFFF)
-
-/*********************************************************************
* Phase Locked Loop (PLL)
*********************************************************************/
/* Bit definitions and macros for PLL_PODR */
diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h
index b2bfb69..7fcf4ef 100644
--- a/include/asm-m68k/m5445x.h
+++ b/include/asm-m68k/m5445x.h
@@ -27,84 +27,6 @@
#define __MCF5445X__
/*********************************************************************
-* Cross-bar switch (XBS)
-*********************************************************************/
-
-/* Bit definitions and macros for PRS group */
-#define XBS_PRS_M0(x) (((x)&0x00000007)) /* Core */
-#define XBS_PRS_M1(x) (((x)&0x00000007)<<4) /* eDMA */
-#define XBS_PRS_M2(x) (((x)&0x00000007)<<8) /* FEC0 */
-#define XBS_PRS_M3(x) (((x)&0x00000007)<<12) /* FEC1 */
-#define XBS_PRS_M5(x) (((x)&0x00000007)<<20) /* PCI controller */
-#define XBS_PRS_M6(x) (((x)&0x00000007)<<24) /* USB OTG */
-#define XBS_PRS_M7(x) (((x)&0x00000007)<<28) /* Serial Boot */
-
-/* Bit definitions and macros for CRS group */
-#define XBS_CRS_PARK(x) (((x)&0x00000007)) /* Master parking ctrl */
-#define XBS_CRS_PCTL(x) (((x)&0x00000003)<<4) /* Parking mode ctrl */
-#define XBS_CRS_ARB (0x00000100) /* Arbitration Mode */
-#define XBS_CRS_RO (0x80000000) /* Read Only */
-
-#define XBS_CRS_PCTL_PARK_FIELD (0)
-#define XBS_CRS_PCTL_PARK_ON_LAST (1)
-#define XBS_CRS_PCTL_PARK_NONE (2)
-#define XBS_CRS_PCTL_PARK_CORE (0)
-#define XBS_CRS_PCTL_PARK_EDMA (1)
-#define XBS_CRS_PCTL_PARK_FEC0 (2)
-#define XBS_CRS_PCTL_PARK_FEC1 (3)
-#define XBS_CRS_PCTL_PARK_PCI (5)
-#define XBS_CRS_PCTL_PARK_USB (6)
-#define XBS_CRS_PCTL_PARK_SBF (7)
-
-/*********************************************************************
-* FlexBus Chip Selects (FBCS)
-*********************************************************************/
-
-/* Bit definitions and macros for CSAR group */
-#define FBCS_CSAR_BA(x) ((x)&0xFFFF0000)
-
-/* Bit definitions and macros for CSMR group */
-#define FBCS_CSMR_V (0x00000001) /* Valid bit */
-#define FBCS_CSMR_WP (0x00000100) /* Write protect */
-#define FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) /* Base address mask */
-#define FBCS_CSMR_BAM_4G (0xFFFF0000)
-#define FBCS_CSMR_BAM_2G (0x7FFF0000)
-#define FBCS_CSMR_BAM_1G (0x3FFF0000)
-#define FBCS_CSMR_BAM_1024M (0x3FFF0000)
-#define FBCS_CSMR_BAM_512M (0x1FFF0000)
-#define FBCS_CSMR_BAM_256M (0x0FFF0000)
-#define FBCS_CSMR_BAM_128M (0x07FF0000)
-#define FBCS_CSMR_BAM_64M (0x03FF0000)
-#define FBCS_CSMR_BAM_32M (0x01FF0000)
-#define FBCS_CSMR_BAM_16M (0x00FF0000)
-#define FBCS_CSMR_BAM_8M (0x007F0000)
-#define FBCS_CSMR_BAM_4M (0x003F0000)
-#define FBCS_CSMR_BAM_2M (0x001F0000)
-#define FBCS_CSMR_BAM_1M (0x000F0000)
-#define FBCS_CSMR_BAM_1024K (0x000F0000)
-#define FBCS_CSMR_BAM_512K (0x00070000)
-#define FBCS_CSMR_BAM_256K (0x00030000)
-#define FBCS_CSMR_BAM_128K (0x00010000)
-#define FBCS_CSMR_BAM_64K (0x00000000)
-
-/* Bit definitions and macros for CSCR group */
-#define FBCS_CSCR_BSTW (0x00000008) /* Burst-write enable */
-#define FBCS_CSCR_BSTR (0x00000010) /* Burst-read enable */
-#define FBCS_CSCR_BEM (0x00000020) /* Byte-enable mode */
-#define FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) /* Port size */
-#define FBCS_CSCR_AA (0x00000100) /* Auto-acknowledge */
-#define FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) /* Wait states */
-#define FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) /* Write address hold or deselect */
-#define FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) /* Read address hold or deselect */
-#define FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) /* Address setup */
-#define FBCS_CSCR_SWSEN (0x00800000) /* Secondary wait state enable */
-#define FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) /* Secondary wait states */
-
-#define FBCS_CSCR_PS_8 (0x00000040)
-#define FBCS_CSCR_PS_16 (0x00000080)
-#define FBCS_CSCR_PS_32 (0x00000000)
-
-/*********************************************************************
* Interrupt Controller (INTC)
*********************************************************************/
#define INT0_LO_RSVD0 (0)
@@ -422,106 +344,6 @@
#define INTC_ICR_IL(x) (((x)&0x07))
/*********************************************************************
-* DMA Serial Peripheral Interface (DSPI)
-*********************************************************************/
-
-/* Bit definitions and macros for DMCR */
-#define DSPI_DMCR_HALT (0x00000001)
-#define DSPI_DMCR_SMPL_PT(x) (((x)&0x00000003)<<8)
-#define DSPI_DMCR_CRXF (0x00000400)
-#define DSPI_DMCR_CTXF (0x00000800)
-#define DSPI_DMCR_DRXF (0x00001000)
-#define DSPI_DMCR_DTXF (0x00002000)
-#define DSPI_DMCR_CSIS0 (0x00010000)
-#define DSPI_DMCR_CSIS2 (0x00040000)
-#define DSPI_DMCR_CSIS3 (0x00080000)
-#define DSPI_DMCR_CSIS5 (0x00200000)
-#define DSPI_DMCR_ROOE (0x01000000)
-#define DSPI_DMCR_PCSSE (0x02000000)
-#define DSPI_DMCR_MTFE (0x04000000)
-#define DSPI_DMCR_FRZ (0x08000000)
-#define DSPI_DMCR_DCONF(x) (((x)&0x00000003)<<28)
-#define DSPI_DMCR_CSCK (0x40000000)
-#define DSPI_DMCR_MSTR (0x80000000)
-
-/* Bit definitions and macros for DTCR */
-#define DSPI_DTCR_SPI_TCNT(x) (((x)&0x0000FFFF)<<16)
-
-/* Bit definitions and macros for DCTAR group */
-#define DSPI_DCTAR_BR(x) (((x)&0x0000000F))
-#define DSPI_DCTAR_DT(x) (((x)&0x0000000F)<<4)
-#define DSPI_DCTAR_ASC(x) (((x)&0x0000000F)<<8)
-#define DSPI_DCTAR_CSSCK(x) (((x)&0x0000000F)<<12)
-#define DSPI_DCTAR_PBR(x) (((x)&0x00000003)<<16)
-#define DSPI_DCTAR_PDT(x) (((x)&0x00000003)<<18)
-#define DSPI_DCTAR_PASC(x) (((x)&0x00000003)<<20)
-#define DSPI_DCTAR_PCSSCK(x) (((x)&0x00000003)<<22)
-#define DSPI_DCTAR_LSBFE (0x01000000)
-#define DSPI_DCTAR_CPHA (0x02000000)
-#define DSPI_DCTAR_CPOL (0x04000000)
-#define DSPI_DCTAR_TRSZ(x) (((x)&0x0000000F)<<27)
-#define DSPI_DCTAR_PCSSCK_1CLK (0x00000000)
-#define DSPI_DCTAR_PCSSCK_3CLK (0x00400000)
-#define DSPI_DCTAR_PCSSCK_5CLK (0x00800000)
-#define DSPI_DCTAR_PCSSCK_7CLK (0x00A00000)
-#define DSPI_DCTAR_PASC_1CLK (0x00000000)
-#define DSPI_DCTAR_PASC_3CLK (0x00100000)
-#define DSPI_DCTAR_PASC_5CLK (0x00200000)
-#define DSPI_DCTAR_PASC_7CLK (0x00300000)
-#define DSPI_DCTAR_PDT_1CLK (0x00000000)
-#define DSPI_DCTAR_PDT_3CLK (0x00040000)
-#define DSPI_DCTAR_PDT_5CLK (0x00080000)
-#define DSPI_DCTAR_PDT_7CLK (0x000A0000)
-#define DSPI_DCTAR_PBR_1CLK (0x00000000)
-#define DSPI_DCTAR_PBR_3CLK (0x00010000)
-#define DSPI_DCTAR_PBR_5CLK (0x00020000)
-#define DSPI_DCTAR_PBR_7CLK (0x00030000)
-
-/* Bit definitions and macros for DSR */
-#define DSPI_DSR_RXPTR(x) (((x)&0x0000000F))
-#define DSPI_DSR_RXCTR(x) (((x)&0x0000000F)<<4)
-#define DSPI_DSR_TXPTR(x) (((x)&0x0000000F)<<8)
-#define DSPI_DSR_TXCTR(x) (((x)&0x0000000F)<<12)
-#define DSPI_DSR_RFDF (0x00020000)
-#define DSPI_DSR_RFOF (0x00080000)
-#define DSPI_DSR_TFFF (0x02000000)
-#define DSPI_DSR_TFUF (0x08000000)
-#define DSPI_DSR_EOQF (0x10000000)
-#define DSPI_DSR_TXRXS (0x40000000)
-#define DSPI_DSR_TCF (0x80000000)
-
-/* Bit definitions and macros for DIRSR */
-#define DSPI_DIRSR_RFDFS (0x00010000)
-#define DSPI_DIRSR_RFDFE (0x00020000)
-#define DSPI_DIRSR_RFOFE (0x00080000)
-#define DSPI_DIRSR_TFFFS (0x01000000)
-#define DSPI_DIRSR_TFFFE (0x02000000)
-#define DSPI_DIRSR_TFUFE (0x08000000)
-#define DSPI_DIRSR_EOQFE (0x10000000)
-#define DSPI_DIRSR_TCFE (0x80000000)
-
-/* Bit definitions and macros for DTFR */
-#define DSPI_DTFR_TXDATA(x) (((x)&0x0000FFFF))
-#define DSPI_DTFR_CS0 (0x00010000)
-#define DSPI_DTFR_CS2 (0x00040000)
-#define DSPI_DTFR_CS3 (0x00080000)
-#define DSPI_DTFR_CS5 (0x00200000)
-#define DSPI_DTFR_CTCNT (0x04000000)
-#define DSPI_DTFR_EOQ (0x08000000)
-#define DSPI_DTFR_CTAS(x) (((x)&0x00000007)<<28)
-#define DSPI_DTFR_CONT (0x80000000)
-
-/* Bit definitions and macros for DRFR */
-#define DSPI_DRFR_RXDATA(x) (((x)&0x0000FFFF))
-
-/* Bit definitions and macros for DTFDR group */
-#define DSPI_DTFDR_TXDATA(x) (((x)&0x0000FFFF))
-#define DSPI_DTFDR_TXCMD(x) (((x)&0x0000FFFF)<<16)
-
-/* Bit definitions and macros for DRFDR group */
-#define DSPI_DRFDR_RXDATA(x) (((x)&0x0000FFFF))
-
-/*********************************************************************
* Edge Port Module (EPORT)
*********************************************************************/
@@ -1298,127 +1120,6 @@
#define SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F)
/*********************************************************************
-* Synchronous Serial Interface (SSI)
-*********************************************************************/
-
-/* Bit definitions and macros for CR */
-#define SSI_CR_SSI_EN (0x00000001)
-#define SSI_CR_TE (0x00000002)
-#define SSI_CR_RE (0x00000004)
-#define SSI_CR_NET (0x00000008)
-#define SSI_CR_SYN (0x00000010)
-#define SSI_CR_I2S(x) (((x)&0x00000003)<<5)
-#define SSI_CR_MCE (0x00000080)
-#define SSI_CR_TCH (0x00000100)
-#define SSI_CR_CIS (0x00000200)
-#define SSI_CR_I2S_NORMAL (0x00000000)
-#define SSI_CR_I2S_MASTER (0x00000020)
-#define SSI_CR_I2S_SLAVE (0x00000040)
-
-/* Bit definitions and macros for ISR */
-#define SSI_ISR_TFE0 (0x00000001)
-#define SSI_ISR_TFE1 (0x00000002)
-#define SSI_ISR_RFF0 (0x00000004)
-#define SSI_ISR_RFF1 (0x00000008)
-#define SSI_ISR_RLS (0x00000010)
-#define SSI_ISR_TLS (0x00000020)
-#define SSI_ISR_RFS (0x00000040)
-#define SSI_ISR_TFS (0x00000080)
-#define SSI_ISR_TUE0 (0x00000100)
-#define SSI_ISR_TUE1 (0x00000200)
-#define SSI_ISR_ROE0 (0x00000400)
-#define SSI_ISR_ROE1 (0x00000800)
-#define SSI_ISR_TDE0 (0x00001000)
-#define SSI_ISR_TDE1 (0x00002000)
-#define SSI_ISR_RDR0 (0x00004000)
-#define SSI_ISR_RDR1 (0x00008000)
-#define SSI_ISR_RXT (0x00010000)
-#define SSI_ISR_CMDDU (0x00020000)
-#define SSI_ISR_CMDAU (0x00040000)
-
-/* Bit definitions and macros for IER */
-#define SSI_IER_TFE0 (0x00000001)
-#define SSI_IER_TFE1 (0x00000002)
-#define SSI_IER_RFF0 (0x00000004)
-#define SSI_IER_RFF1 (0x00000008)
-#define SSI_IER_RLS (0x00000010)
-#define SSI_IER_TLS (0x00000020)
-#define SSI_IER_RFS (0x00000040)
-#define SSI_IER_TFS (0x00000080)
-#define SSI_IER_TUE0 (0x00000100)
-#define SSI_IER_TUE1 (0x00000200)
-#define SSI_IER_ROE0 (0x00000400)
-#define SSI_IER_ROE1 (0x00000800)
-#define SSI_IER_TDE0 (0x00001000)
-#define SSI_IER_TDE1 (0x00002000)
-#define SSI_IER_RDR0 (0x00004000)
-#define SSI_IER_RDR1 (0x00008000)
-#define SSI_IER_RXT (0x00010000)
-#define SSI_IER_CMDU (0x00020000)
-#define SSI_IER_CMDAU (0x00040000)
-#define SSI_IER_TIE (0x00080000)
-#define SSI_IER_TDMAE (0x00100000)
-#define SSI_IER_RIE (0x00200000)
-#define SSI_IER_RDMAE (0x00400000)
-
-/* Bit definitions and macros for TCR */
-#define SSI_TCR_TEFS (0x00000001)
-#define SSI_TCR_TFSL (0x00000002)
-#define SSI_TCR_TFSI (0x00000004)
-#define SSI_TCR_TSCKP (0x00000008)
-#define SSI_TCR_TSHFD (0x00000010)
-#define SSI_TCR_TXDIR (0x00000020)
-#define SSI_TCR_TFDIR (0x00000040)
-#define SSI_TCR_TFEN0 (0x00000080)
-#define SSI_TCR_TFEN1 (0x00000100)
-#define SSI_TCR_TXBIT0 (0x00000200)
-
-/* Bit definitions and macros for RCR */
-#define SSI_RCR_REFS (0x00000001)
-#define SSI_RCR_RFSL (0x00000002)
-#define SSI_RCR_RFSI (0x00000004)
-#define SSI_RCR_RSCKP (0x00000008)
-#define SSI_RCR_RSHFD (0x00000010)
-#define SSI_RCR_RFEN0 (0x00000080)
-#define SSI_RCR_RFEN1 (0x00000100)
-#define SSI_RCR_RXBIT0 (0x00000200)
-#define SSI_RCR_RXEXT (0x00000400)
-
-/* Bit definitions and macros for CCR */
-#define SSI_CCR_PM(x) (((x)&0x000000FF))
-#define SSI_CCR_DC(x) (((x)&0x0000001F)<<8)
-#define SSI_CCR_WL(x) (((x)&0x0000000F)<<13)
-#define SSI_CCR_PSR (0x00020000)
-#define SSI_CCR_DIV2 (0x00040000)
-
-/* Bit definitions and macros for FCSR */
-#define SSI_FCSR_TFWM0(x) (((x)&0x0000000F))
-#define SSI_FCSR_RFWM0(x) (((x)&0x0000000F)<<4)
-#define SSI_FCSR_TFCNT0(x) (((x)&0x0000000F)<<8)
-#define SSI_FCSR_RFCNT0(x) (((x)&0x0000000F)<<12)
-#define SSI_FCSR_TFWM1(x) (((x)&0x0000000F)<<16)
-#define SSI_FCSR_RFWM1(x) (((x)&0x0000000F)<<20)
-#define SSI_FCSR_TFCNT1(x) (((x)&0x0000000F)<<24)
-#define SSI_FCSR_RFCNT1(x) (((x)&0x0000000F)<<28)
-
-/* Bit definitions and macros for ACR */
-#define SSI_ACR_AC97EN (0x00000001)
-#define SSI_ACR_FV (0x00000002)
-#define SSI_ACR_TIF (0x00000004)
-#define SSI_ACR_RD (0x00000008)
-#define SSI_ACR_WR (0x00000010)
-#define SSI_ACR_FRDIV(x) (((x)&0x0000003F)<<5)
-
-/* Bit definitions and macros for ACADD */
-#define SSI_ACADD_SSI_ACADD(x) (((x)&0x0007FFFF))
-
-/* Bit definitions and macros for ACDAT */
-#define SSI_ACDAT_SSI_ACDAT(x) (((x)&0x0007FFFF))
-
-/* Bit definitions and macros for ATAG */
-#define SSI_ATAG_DDI_ATAG(x) (((x)&0x0000FFFF))
-
-/*********************************************************************
* Phase Locked Loop (PLL)
*********************************************************************/
@@ -1503,13 +1204,13 @@
#define PCI_TCR1_P (0x00010000) /* Prefetch reads */
#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */
-#define PCI_TCR1_B5E (0x00002000) /* */
-#define PCI_TCR1_B4E (0x00001000) /* */
-#define PCI_TCR1_B3E (0x00000800) /* */
-#define PCI_TCR1_B2E (0x00000400) /* */
-#define PCI_TCR1_B1E (0x00000200) /* */
-#define PCI_TCR1_B0E (0x00000100) /* */
-#define PCI_TCR1_CR (0x00000001) /* */
+#define PCI_TCR2_B5E (0x00002000) /* */
+#define PCI_TCR2_B4E (0x00001000) /* */
+#define PCI_TCR2_B3E (0x00000800) /* */
+#define PCI_TCR2_B2E (0x00000400) /* */
+#define PCI_TCR2_B1E (0x00000200) /* */
+#define PCI_TCR2_B0E (0x00000100) /* */
+#define PCI_TCR2_CR (0x00000001) /* */
#define PCI_TBATR_BAT(x) ((x & 0xFFF) << 20)
#define PCI_TBATR_EN (0x00000001) /* Enable */
@@ -1533,8 +1234,7 @@
#define PCI_ICR_REE (0x04000000) /* Retry error enable */
#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */
#define PCI_ICR_TAE (0x01000000) /* Target abort enable */
-
-#define PCI_IDR_DEVID (
+#define PCI_ICR_MAXRETRY(x) ((x) & 0x000000FF)
/********************************************************************/
diff --git a/include/asm-m68k/m547x_8x.h b/include/asm-m68k/m547x_8x.h
new file mode 100644
index 0000000..2db8df2
--- /dev/null
+++ b/include/asm-m68k/m547x_8x.h
@@ -0,0 +1,502 @@
+/*
+ * mcf547x_8x.h -- Definitions for Freescale Coldfire 547x_8x
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef mcf547x_8x_h
+#define mcf547x_8x_h
+
+/*********************************************************************
+* XLB Arbiter (XLB)
+*********************************************************************/
+/* Bit definitions and macros for XARB_CFG */
+#define XARB_CFG_AT (0x00000002)
+#define XARB_CFG_DT (0x00000004)
+#define XARB_CFG_BA (0x00000008)
+#define XARB_CFG_PM(x) (((x)&0x00000003)<<5)
+#define XARB_CFG_SP(x) (((x)&0x00000007)<<8)
+#define XARB_CFG_PLDIS (0x80000000)
+
+/* Bit definitions and macros for XARB_SR */
+#define XARB_SR_AT (0x00000001)
+#define XARB_SR_DT (0x00000002)
+#define XARB_SR_BA (0x00000004)
+#define XARB_SR_TTM (0x00000008)
+#define XARB_SR_ECW (0x00000010)
+#define XARB_SR_TTR (0x00000020)
+#define XARB_SR_TTA (0x00000040)
+#define XARB_SR_MM (0x00000080)
+#define XARB_SR_SEA (0x00000100)
+
+/* Bit definitions and macros for XARB_IMR */
+#define XARB_IMR_ATE (0x00000001)
+#define XARB_IMR_DTE (0x00000002)
+#define XARB_IMR_BAE (0x00000004)
+#define XARB_IMR_TTME (0x00000008)
+#define XARB_IMR_ECWE (0x00000010)
+#define XARB_IMR_TTRE (0x00000020)
+#define XARB_IMR_TTAE (0x00000040)
+#define XARB_IMR_MME (0x00000080)
+#define XARB_IMR_SEAE (0x00000100)
+
+/* Bit definitions and macros for XARB_SIGCAP */
+#define XARB_SIGCAP_TT(x) ((x)&0x0000001F)
+#define XARB_SIGCAP_TBST (0x00000020)
+#define XARB_SIGCAP_TSIZ(x) (((x)&0x00000007)<<7)
+
+/* Bit definitions and macros for XARB_PRIEN */
+#define XARB_PRIEN_M0 (0x00000001)
+#define XARB_PRIEN_M2 (0x00000004)
+#define XARB_PRIEN_M3 (0x00000008)
+
+/* Bit definitions and macros for XARB_PRI */
+#define XARB_PRI_M0P(x) (((x)&0x00000007)<<0)
+#define XARB_PRI_M2P(x) (((x)&0x00000007)<<8)
+#define XARB_PRI_M3P(x) (((x)&0x00000007)<<12)
+
+/*********************************************************************
+* General Purpose I/O (GPIO)
+*********************************************************************/
+/* Bit definitions and macros for GPIO_PAR_FBCTL */
+#define GPIO_PAR_FBCTL_TS(x) (((x)&0x0003)<<0)
+#define GPIO_PAR_FBCTL_TA (0x0004)
+#define GPIO_PAR_FBCTL_RWB(x) (((x)&0x0003)<<4)
+#define GPIO_PAR_FBCTL_OE (0x0040)
+#define GPIO_PAR_FBCTL_BWE0 (0x0100)
+#define GPIO_PAR_FBCTL_BWE1 (0x0400)
+#define GPIO_PAR_FBCTL_BWE2 (0x1000)
+#define GPIO_PAR_FBCTL_BWE3 (0x4000)
+#define GPIO_PAR_FBCTL_TS_GPIO (0)
+#define GPIO_PAR_FBCTL_TS_TBST (2)
+#define GPIO_PAR_FBCTL_TS_TS (3)
+#define GPIO_PAR_FBCTL_RWB_GPIO (0x0000)
+#define GPIO_PAR_FBCTL_RWB_TBST (0x0020)
+#define GPIO_PAR_FBCTL_RWB_RWB (0x0030)
+
+/* Bit definitions and macros for GPIO_PAR_FBCS */
+#define GPIO_PAR_FBCS_CS1 (0x02)
+#define GPIO_PAR_FBCS_CS2 (0x04)
+#define GPIO_PAR_FBCS_CS3 (0x08)
+#define GPIO_PAR_FBCS_CS4 (0x10)
+#define GPIO_PAR_FBCS_CS5 (0x20)
+
+/* Bit definitions and macros for GPIO_PAR_DMA */
+#define GPIO_PAR_DMA_DREQ0(x) (((x)&0x03)<<0)
+#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<2)
+#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<4)
+#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6)
+#define GPIO_PAR_DMA_DACKx_GPIO (0)
+#define GPIO_PAR_DMA_DACKx_TOUT (2)
+#define GPIO_PAR_DMA_DACKx_DACK (3)
+#define GPIO_PAR_DMA_DREQx_GPIO (0)
+#define GPIO_PAR_DMA_DREQx_TIN (2)
+#define GPIO_PAR_DMA_DREQx_DREQ (3)
+
+/* Bit definitions and macros for GPIO_PAR_FECI2CIRQ */
+#define GPIO_PAR_FECI2CIRQ_IRQ5 (0x0001)
+#define GPIO_PAR_FECI2CIRQ_IRQ6 (0x0002)
+#define GPIO_PAR_FECI2CIRQ_SCL (0x0004)
+#define GPIO_PAR_FECI2CIRQ_SDA (0x0008)
+#define GPIO_PAR_FECI2CIRQ_E1MDC(x) (((x)&0x0003)<<6)
+#define GPIO_PAR_FECI2CIRQ_E1MDIO(x) (((x)&0x0003)<<8)
+#define GPIO_PAR_FECI2CIRQ_E1MII (0x0400)
+#define GPIO_PAR_FECI2CIRQ_E17 (0x0800)
+#define GPIO_PAR_FECI2CIRQ_E0MDC (0x1000)
+#define GPIO_PAR_FECI2CIRQ_E0MDIO (0x2000)
+#define GPIO_PAR_FECI2CIRQ_E0MII (0x4000)
+#define GPIO_PAR_FECI2CIRQ_E07 (0x8000)
+#define GPIO_PAR_FECI2CIRQ_E1MDIO_CANRX (0x0000)
+#define GPIO_PAR_FECI2CIRQ_E1MDIO_SDA (0x0200)
+#define GPIO_PAR_FECI2CIRQ_E1MDIO_EMDIO (0x0300)
+#define GPIO_PAR_FECI2CIRQ_E1MDC_CANTX (0x0000)
+#define GPIO_PAR_FECI2CIRQ_E1MDC_SCL (0x0080)
+#define GPIO_PAR_FECI2CIRQ_E1MDC_EMDC (0x00C0)
+
+/* Bit definitions and macros for GPIO_PAR_PCIBG */
+#define GPIO_PAR_PCIBG_PCIBG0(x) (((x)&0x0003)<<0)
+#define GPIO_PAR_PCIBG_PCIBG1(x) (((x)&0x0003)<<2)
+#define GPIO_PAR_PCIBG_PCIBG2(x) (((x)&0x0003)<<4)
+#define GPIO_PAR_PCIBG_PCIBG3(x) (((x)&0x0003)<<6)
+#define GPIO_PAR_PCIBG_PCIBG4(x) (((x)&0x0003)<<8)
+
+/* Bit definitions and macros for GPIO_PAR_PCIBR */
+#define GPIO_PAR_PCIBR_PCIBR0(x) (((x)&0x0003)<<0)
+#define GPIO_PAR_PCIBR_PCIBR1(x) (((x)&0x0003)<<2)
+#define GPIO_PAR_PCIBR_PCIBR2(x) (((x)&0x0003)<<4)
+#define GPIO_PAR_PCIBR_PCIBR3(x) (((x)&0x0003)<<6)
+#define GPIO_PAR_PCIBR_PCIBR4(x) (((x)&0x0003)<<8)
+
+/* Bit definitions and macros for GPIO_PAR_PSC3 */
+#define GPIO_PAR_PSC3_TXD3 (0x04)
+#define GPIO_PAR_PSC3_RXD3 (0x08)
+#define GPIO_PAR_PSC3_RTS3(x) (((x)&0x03)<<4)
+#define GPIO_PAR_PSC3_CTS3(x) (((x)&0x03)<<6)
+#define GPIO_PAR_PSC3_CTS3_GPIO (0x00)
+#define GPIO_PAR_PSC3_CTS3_BCLK (0x80)
+#define GPIO_PAR_PSC3_CTS3_CTS (0xC0)
+#define GPIO_PAR_PSC3_RTS3_GPIO (0x00)
+#define GPIO_PAR_PSC3_RTS3_FSYNC (0x20)
+#define GPIO_PAR_PSC3_RTS3_RTS (0x30)
+#define GPIO_PAR_PSC3_CTS2_CANRX (0x40)
+
+/* Bit definitions and macros for GPIO_PAR_PSC2 */
+#define GPIO_PAR_PSC2_TXD2 (0x04)
+#define GPIO_PAR_PSC2_RXD2 (0x08)
+#define GPIO_PAR_PSC2_RTS2(x) (((x)&0x03)<<4)
+#define GPIO_PAR_PSC2_CTS2(x) (((x)&0x03)<<6)
+#define GPIO_PAR_PSC2_CTS2_GPIO (0x00)
+#define GPIO_PAR_PSC2_CTS2_BCLK (0x80)
+#define GPIO_PAR_PSC2_CTS2_CTS (0xC0)
+#define GPIO_PAR_PSC2_RTS2_GPIO (0x00)
+#define GPIO_PAR_PSC2_RTS2_CANTX (0x10)
+#define GPIO_PAR_PSC2_RTS2_FSYNC (0x20)
+#define GPIO_PAR_PSC2_RTS2_RTS (0x30)
+
+/* Bit definitions and macros for GPIO_PAR_PSC1 */
+#define GPIO_PAR_PSC1_TXD1 (0x04)
+#define GPIO_PAR_PSC1_RXD1 (0x08)
+#define GPIO_PAR_PSC1_RTS1(x) (((x)&0x03)<<4)
+#define GPIO_PAR_PSC1_CTS1(x) (((x)&0x03)<<6)
+#define GPIO_PAR_PSC1_CTS1_GPIO (0x00)
+#define GPIO_PAR_PSC1_CTS1_BCLK (0x80)
+#define GPIO_PAR_PSC1_CTS1_CTS (0xC0)
+#define GPIO_PAR_PSC1_RTS1_GPIO (0x00)
+#define GPIO_PAR_PSC1_RTS1_FSYNC (0x20)
+#define GPIO_PAR_PSC1_RTS1_RTS (0x30)
+
+/* Bit definitions and macros for GPIO_PAR_PSC0 */
+#define GPIO_PAR_PSC0_TXD0 (0x04)
+#define GPIO_PAR_PSC0_RXD0 (0x08)
+#define GPIO_PAR_PSC0_RTS0(x) (((x)&0x03)<<4)
+#define GPIO_PAR_PSC0_CTS0(x) (((x)&0x03)<<6)
+#define GPIO_PAR_PSC0_CTS0_GPIO (0x00)
+#define GPIO_PAR_PSC0_CTS0_BCLK (0x80)
+#define GPIO_PAR_PSC0_CTS0_CTS (0xC0)
+#define GPIO_PAR_PSC0_RTS0_GPIO (0x00)
+#define GPIO_PAR_PSC0_RTS0_FSYNC (0x20)
+#define GPIO_PAR_PSC0_RTS0_RTS (0x30)
+
+/* Bit definitions and macros for GPIO_PAR_DSPI */
+#define GPIO_PAR_DSPI_SOUT(x) (((x)&0x0003)<<0)
+#define GPIO_PAR_DSPI_SIN(x) (((x)&0x0003)<<2)
+#define GPIO_PAR_DSPI_SCK(x) (((x)&0x0003)<<4)
+#define GPIO_PAR_DSPI_CS0(x) (((x)&0x0003)<<6)
+#define GPIO_PAR_DSPI_CS2(x) (((x)&0x0003)<<8)
+#define GPIO_PAR_DSPI_CS3(x) (((x)&0x0003)<<10)
+#define GPIO_PAR_DSPI_CS5 (0x1000)
+#define GPIO_PAR_DSPI_CS3_GPIO (0x0000)
+#define GPIO_PAR_DSPI_CS3_CANTX (0x0400)
+#define GPIO_PAR_DSPI_CS3_TOUT (0x0800)
+#define GPIO_PAR_DSPI_CS3_DSPICS (0x0C00)
+#define GPIO_PAR_DSPI_CS2_GPIO (0x0000)
+#define GPIO_PAR_DSPI_CS2_CANTX (0x0100)
+#define GPIO_PAR_DSPI_CS2_TOUT (0x0200)
+#define GPIO_PAR_DSPI_CS2_DSPICS (0x0300)
+#define GPIO_PAR_DSPI_CS0_GPIO (0x0000)
+#define GPIO_PAR_DSPI_CS0_FSYNC (0x0040)
+#define GPIO_PAR_DSPI_CS0_RTS (0x0080)
+#define GPIO_PAR_DSPI_CS0_DSPICS (0x00C0)
+#define GPIO_PAR_DSPI_SCK_GPIO (0x0000)
+#define GPIO_PAR_DSPI_SCK_BCLK (0x0010)
+#define GPIO_PAR_DSPI_SCK_CTS (0x0020)
+#define GPIO_PAR_DSPI_SCK_SCK (0x0030)
+#define GPIO_PAR_DSPI_SIN_GPIO (0x0000)
+#define GPIO_PAR_DSPI_SIN_RXD (0x0008)
+#define GPIO_PAR_DSPI_SIN_SIN (0x000C)
+#define GPIO_PAR_DSPI_SOUT_GPIO (0x0000)
+#define GPIO_PAR_DSPI_SOUT_TXD (0x0002)
+#define GPIO_PAR_DSPI_SOUT_SOUT (0x0003)
+
+/* Bit definitions and macros for GPIO_PAR_TIMER */
+#define GPIO_PAR_TIMER_TOUT2 (0x01)
+#define GPIO_PAR_TIMER_TIN2(x) (((x)&0x03)<<1)
+#define GPIO_PAR_TIMER_TOUT3 (0x08)
+#define GPIO_PAR_TIMER_TIN3(x) (((x)&0x03)<<4)
+#define GPIO_PAR_TIMER_TIN3_CANRX (0x00)
+#define GPIO_PAR_TIMER_TIN3_IRQ (0x20)
+#define GPIO_PAR_TIMER_TIN3_TIN (0x30)
+#define GPIO_PAR_TIMER_TIN2_CANRX (0x00)
+#define GPIO_PAR_TIMER_TIN2_IRQ (0x04)
+#define GPIO_PAR_TIMER_TIN2_TIN (0x06)
+
+/*********************************************************************
+* Slice Timer (SLT)
+*********************************************************************/
+#define SLT_CR_RUN (0x04000000)
+#define SLT_CR_IEN (0x02000000)
+#define SLT_CR_TEN (0x01000000)
+
+#define SLT_SR_BE (0x02000000)
+#define SLT_SR_ST (0x01000000)
+
+/*********************************************************************
+* Interrupt Controller (INTC)
+*********************************************************************/
+#define INT0_LO_RSVD0 (0)
+#define INT0_LO_EPORT1 (1)
+#define INT0_LO_EPORT2 (2)
+#define INT0_LO_EPORT3 (3)
+#define INT0_LO_EPORT4 (4)
+#define INT0_LO_EPORT5 (5)
+#define INT0_LO_EPORT6 (6)
+#define INT0_LO_EPORT7 (7)
+#define INT0_LO_EP0ISR (15)
+#define INT0_LO_EP1ISR (16)
+#define INT0_LO_EP2ISR (17)
+#define INT0_LO_EP3ISR (18)
+#define INT0_LO_EP4ISR (19)
+#define INT0_LO_EP5ISR (20)
+#define INT0_LO_EP6ISR (21)
+#define INT0_LO_USBISR (22)
+#define INT0_LO_USBAISR (23)
+#define INT0_LO_USB (24)
+#define INT1_LO_DSPI_RFOF_TFUF (25)
+#define INT1_LO_DSPI_RFOF (26)
+#define INT1_LO_DSPI_RFDF (27)
+#define INT1_LO_DSPI_TFUF (28)
+#define INT1_LO_DSPI_TCF (29)
+#define INT1_LO_DSPI_TFFF (30)
+#define INT1_LO_DSPI_EOQF (31)
+
+#define INT0_HI_UART3 (32)
+#define INT0_HI_UART2 (33)
+#define INT0_HI_UART1 (34)
+#define INT0_HI_UART0 (35)
+#define INT0_HI_COMMTIM_TC (36)
+#define INT0_HI_SEC (37)
+#define INT0_HI_FEC1 (38)
+#define INT0_HI_FEC0 (39)
+#define INT0_HI_I2C (40)
+#define INT0_HI_PCIARB (41)
+#define INT0_HI_CBPCI (42)
+#define INT0_HI_XLBPCI (43)
+#define INT0_HI_XLBARB (47)
+#define INT0_HI_DMA (48)
+#define INT0_HI_CAN0_ERROR (49)
+#define INT0_HI_CAN0_BUSOFF (50)
+#define INT0_HI_CAN0_MBOR (51)
+#define INT0_HI_SLT1 (53)
+#define INT0_HI_SLT0 (54)
+#define INT0_HI_CAN1_ERROR (55)
+#define INT0_HI_CAN1_BUSOFF (56)
+#define INT0_HI_CAN1_MBOR (57)
+#define INT0_HI_GPT3 (59)
+#define INT0_HI_GPT2 (60)
+#define INT0_HI_GPT1 (61)
+#define INT0_HI_GPT0 (62)
+
+/* Bit definitions and macros for IPRH */
+#define INTC_IPRH_INT32 (0x00000001)
+#define INTC_IPRH_INT33 (0x00000002)
+#define INTC_IPRH_INT34 (0x00000004)
+#define INTC_IPRH_INT35 (0x00000008)
+#define INTC_IPRH_INT36 (0x00000010)
+#define INTC_IPRH_INT37 (0x00000020)
+#define INTC_IPRH_INT38 (0x00000040)
+#define INTC_IPRH_INT39 (0x00000080)
+#define INTC_IPRH_INT40 (0x00000100)
+#define INTC_IPRH_INT41 (0x00000200)
+#define INTC_IPRH_INT42 (0x00000400)
+#define INTC_IPRH_INT43 (0x00000800)
+#define INTC_IPRH_INT44 (0x00001000)
+#define INTC_IPRH_INT45 (0x00002000)
+#define INTC_IPRH_INT46 (0x00004000)
+#define INTC_IPRH_INT47 (0x00008000)
+#define INTC_IPRH_INT48 (0x00010000)
+#define INTC_IPRH_INT49 (0x00020000)
+#define INTC_IPRH_INT50 (0x00040000)
+#define INTC_IPRH_INT51 (0x00080000)
+#define INTC_IPRH_INT52 (0x00100000)
+#define INTC_IPRH_INT53 (0x00200000)
+#define INTC_IPRH_INT54 (0x00400000)
+#define INTC_IPRH_INT55 (0x00800000)
+#define INTC_IPRH_INT56 (0x01000000)
+#define INTC_IPRH_INT57 (0x02000000)
+#define INTC_IPRH_INT58 (0x04000000)
+#define INTC_IPRH_INT59 (0x08000000)
+#define INTC_IPRH_INT60 (0x10000000)
+#define INTC_IPRH_INT61 (0x20000000)
+#define INTC_IPRH_INT62 (0x40000000)
+#define INTC_IPRH_INT63 (0x80000000)
+
+/* Bit definitions and macros for IPRL */
+#define INTC_IPRL_INT0 (0x00000001)
+#define INTC_IPRL_INT1 (0x00000002)
+#define INTC_IPRL_INT2 (0x00000004)
+#define INTC_IPRL_INT3 (0x00000008)
+#define INTC_IPRL_INT4 (0x00000010)
+#define INTC_IPRL_INT5 (0x00000020)
+#define INTC_IPRL_INT6 (0x00000040)
+#define INTC_IPRL_INT7 (0x00000080)
+#define INTC_IPRL_INT8 (0x00000100)
+#define INTC_IPRL_INT9 (0x00000200)
+#define INTC_IPRL_INT10 (0x00000400)
+#define INTC_IPRL_INT11 (0x00000800)
+#define INTC_IPRL_INT12 (0x00001000)
+#define INTC_IPRL_INT13 (0x00002000)
+#define INTC_IPRL_INT14 (0x00004000)
+#define INTC_IPRL_INT15 (0x00008000)
+#define INTC_IPRL_INT16 (0x00010000)
+#define INTC_IPRL_INT17 (0x00020000)
+#define INTC_IPRL_INT18 (0x00040000)
+#define INTC_IPRL_INT19 (0x00080000)
+#define INTC_IPRL_INT20 (0x00100000)
+#define INTC_IPRL_INT21 (0x00200000)
+#define INTC_IPRL_INT22 (0x00400000)
+#define INTC_IPRL_INT23 (0x00800000)
+#define INTC_IPRL_INT24 (0x01000000)
+#define INTC_IPRL_INT25 (0x02000000)
+#define INTC_IPRL_INT26 (0x04000000)
+#define INTC_IPRL_INT27 (0x08000000)
+#define INTC_IPRL_INT28 (0x10000000)
+#define INTC_IPRL_INT29 (0x20000000)
+#define INTC_IPRL_INT30 (0x40000000)
+#define INTC_IPRL_INT31 (0x80000000)
+
+/*********************************************************************
+* General Purpose Timers (GPTMR)
+*********************************************************************/
+/* Enable and Mode Select */
+#define GPT_OCT(x) (x & 0x3)<<4 /* Output Compare Type */
+#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */
+#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */
+#define GPT_CTRL_CE 0x10 /* Counter Enable */
+#define GPT_CTRL_STPCNT 0x04 /* Stop continous */
+#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */
+#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */
+#define GPT_MODE_GPIO(x) (x & 0x3)<<4 /* Gpio Mode Type */
+#define GPT_TMS_ICT 0x01 /* Input Capture Enable */
+#define GPT_TMS_OCT 0x02 /* Output Capture Enable */
+#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */
+#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */
+
+#define GPT_PWM_WIDTH(x) (x & 0xffff)
+
+/* Status */
+#define GPT_STA_CAPTURE(x) (x & 0xffff)
+
+#define GPT_OVFPIN_OVF(x) (x & 0x70)
+#define GPT_OVFPIN_PIN 0x01
+
+#define GPT_INT_TEXP 0x08
+#define GPT_INT_PWMP 0x04
+#define GPT_INT_COMP 0x02
+#define GPT_INT_CAPT 0x01
+
+/*********************************************************************
+* PCI
+*********************************************************************/
+
+/* Bit definitions and macros for SCR */
+#define PCI_SCR_PE (0x80000000) /* Parity Error detected */
+#define PCI_SCR_SE (0x40000000) /* System error signalled */
+#define PCI_SCR_MA (0x20000000) /* Master aboart received */
+#define PCI_SCR_TR (0x10000000) /* Target abort received */
+#define PCI_SCR_TS (0x08000000) /* Target abort signalled */
+#define PCI_SCR_DT (0x06000000) /* PCI_DEVSEL timing */
+#define PCI_SCR_DP (0x01000000) /* Master data parity err */
+#define PCI_SCR_FC (0x00800000) /* Fast back-to-back */
+#define PCI_SCR_R (0x00400000) /* Reserved */
+#define PCI_SCR_66M (0x00200000) /* 66Mhz */
+#define PCI_SCR_C (0x00100000) /* Capabilities list */
+#define PCI_SCR_F (0x00000200) /* Fast back-to-back enable */
+#define PCI_SCR_S (0x00000100) /* SERR enable */
+#define PCI_SCR_ST (0x00000080) /* Addr and Data stepping */
+#define PCI_SCR_PER (0x00000040) /* Parity error response */
+#define PCI_SCR_V (0x00000020) /* VGA palette snoop enable */
+#define PCI_SCR_MW (0x00000010) /* Memory write and invalidate enable */
+#define PCI_SCR_SP (0x00000008) /* Special cycle monitor or ignore */
+#define PCI_SCR_B (0x00000004) /* Bus master enable */
+#define PCI_SCR_M (0x00000002) /* Memory access control */
+#define PCI_SCR_IO (0x00000001) /* I/O access control */
+
+#define PCI_CR1_BIST(x) ((x & 0xFF) << 24) /* Built in self test */
+#define PCI_CR1_HDR(x) ((x & 0xFF) << 16) /* Header type */
+#define PCI_CR1_LTMR(x) ((x & 0xF8) << 8) /* Latency timer */
+#define PCI_CR1_CLS(x) (x & 0x0F) /* Cache line size */
+
+#define PCI_BAR_BAR0(x) (x & 0xFFFC0000)
+#define PCI_BAR_BAR1(x) (x & 0xC0000000)
+#define PCI_BAR_PREF (0x00000004) /* Prefetchable access */
+#define PCI_BAR_RANGE (0x00000002) /* Fixed to 00 */
+#define PCI_BAR_IO_M (0x00000001) /* IO / memory space */
+
+#define PCI_CR2_MAXLAT(x) ((x & 0xFF) << 24) /* Maximum latency */
+#define PCI_CR2_MINGNT(x) ((x & 0xFF) << 16) /* Minimum grant */
+#define PCI_CR2_INTPIN(x) ((x & 0xFF) << 8) /* Interrupt Pin */
+#define PCI_CR2_INTLIN(x) (x & 0xFF) /* Interrupt Line */
+
+#define PCI_GSCR_DRD (0x80000000) /* Delayed read discarded */
+#define PCI_GSCR_PE (0x20000000) /* PCI_PERR detected */
+#define PCI_GSCR_SE (0x10000000) /* SERR detected */
+#define PCI_GSCR_ER (0x08000000) /* Error response detected */
+#define PCI_GSCR_DRDE (0x00008000) /* Delayed read discarded enable */
+#define PCI_GSCR_PEE (0x00002000) /* PERR detected interrupt enable */
+#define PCI_GSCR_SEE (0x00001000) /* SERR detected interrupt enable */
+#define PCI_GSCR_PR (0x00000001) /* PCI reset */
+
+#define PCI_TCR1_LD (0x01000000) /* Latency rule disable */
+#define PCI_TCR1_PID (0x00020000) /* Prefetch invalidate and disable */
+#define PCI_TCR1_P (0x00010000) /* Prefetch reads */
+#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */
+
+#define PCI_TCR1_B5E (0x00002000) /* */
+#define PCI_TCR1_B4E (0x00001000) /* */
+#define PCI_TCR1_B3E (0x00000800) /* */
+#define PCI_TCR1_B2E (0x00000400) /* */
+#define PCI_TCR1_B1E (0x00000200) /* */
+#define PCI_TCR1_B0E (0x00000100) /* */
+#define PCI_TCR1_CR (0x00000001) /* */
+
+#define PCI_TBATR_BAT0(x) (x & 0xFFFC0000)
+#define PCI_TBATR_BAT1(x) (x & 0xC0000000)
+#define PCI_TBATR_EN (0x00000001) /* Enable */
+
+#define PCI_IWCR_W0C_IO (0x08000000) /* Windows Maps to PCI I/O */
+#define PCI_IWCR_W0C_PRC_RDMUL (0x04000000) /* PCI Memory Read multiple */
+#define PCI_IWCR_W0C_PRC_RDLN (0x02000000) /* PCI Memory Read line */
+#define PCI_IWCR_W0C_PRC_RD (0x00000000) /* PCI Memory Read */
+#define PCI_IWCR_W0C_EN (0x01000000) /* Enable - Register initialize */
+#define PCI_IWCR_W1C_IO (0x00080000) /* Windows Maps to PCI I/O */
+#define PCI_IWCR_W1C_PRC_RDMUL (0x00040000) /* PCI Memory Read multiple */
+#define PCI_IWCR_W1C_PRC_RDLN (0x00020000) /* PCI Memory Read line */
+#define PCI_IWCR_W1C_PRC_RD (0x00000000) /* PCI Memory Read */
+#define PCI_IWCR_W1C_EN (0x00010000) /* Enable - Register initialize */
+#define PCI_IWCR_W2C_IO (0x00000800) /* Windows Maps to PCI I/O */
+#define PCI_IWCR_W2C_PRC_RDMUL (0x00000400) /* PCI Memory Read multiple */
+#define PCI_IWCR_W2C_PRC_RDLN (0x00000200) /* PCI Memory Read line */
+#define PCI_IWCR_W2C_PRC_RD (0x00000000) /* PCI Memory Read */
+#define PCI_IWCR_W2C_EN (0x00000100) /* Enable - Register initialize */
+
+#define PCI_ICR_REE (0x04000000) /* Retry error enable */
+#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */
+#define PCI_ICR_TAE (0x01000000) /* Target abort enable */
+#define PCI_ICR_MAXRETRY(x) ((x) & 0x000000FF)
+
+#define PCIARB_ACR_DS (0x80000000)
+#define PCIARB_ARC_EXTMINTEN(x) (((x)&0x1F) << 17)
+#define PCIARB_ARC_INTMINTEN (0x00010000)
+#define PCIARB_ARC_EXTMPRI(x) (((x)&0x1F) << 1)
+#define PCIARB_ARC_INTMPRI (0x00000001)
+
+#endif /* mcf547x_8x_h */
diff --git a/include/asm-ppc/fsl_law.h b/include/asm-ppc/fsl_law.h
new file mode 100644
index 0000000..7cb8840
--- /dev/null
+++ b/include/asm-ppc/fsl_law.h
@@ -0,0 +1,80 @@
+#ifndef _FSL_LAW_H_
+#define _FSL_LAW_H_
+
+#include <asm/io.h>
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#define SET_LAW_ENTRY(idx, a, sz, trgt) \
+ { .index = idx, .addr = a, .size = sz, .trgt_id = trgt }
+
+enum law_size {
+ LAW_SIZE_4K = 0xb,
+ LAW_SIZE_8K,
+ LAW_SIZE_16K,
+ LAW_SIZE_32K,
+ LAW_SIZE_64K,
+ LAW_SIZE_128K,
+ LAW_SIZE_256K,
+ LAW_SIZE_512K,
+ LAW_SIZE_1M,
+ LAW_SIZE_2M,
+ LAW_SIZE_4M,
+ LAW_SIZE_8M,
+ LAW_SIZE_16M,
+ LAW_SIZE_32M,
+ LAW_SIZE_64M,
+ LAW_SIZE_128M,
+ LAW_SIZE_256M,
+ LAW_SIZE_512M,
+ LAW_SIZE_1G,
+ LAW_SIZE_2G,
+ LAW_SIZE_4G,
+ LAW_SIZE_8G,
+ LAW_SIZE_16G,
+ LAW_SIZE_32G,
+};
+
+enum law_trgt_if {
+ LAW_TRGT_IF_PCI = 0x00,
+ LAW_TRGT_IF_PCI_2 = 0x01,
+#ifndef CONFIG_MPC8641
+ LAW_TRGT_IF_PCIE_1 = 0x02,
+#endif
+#ifndef CONFIG_MPC8572
+ LAW_TRGT_IF_PCIE_3 = 0x03,
+#endif
+ LAW_TRGT_IF_LBC = 0x04,
+ LAW_TRGT_IF_CCSR = 0x08,
+ LAW_TRGT_IF_DDR_INTRLV = 0x0b,
+ LAW_TRGT_IF_RIO = 0x0c,
+ LAW_TRGT_IF_DDR = 0x0f,
+ LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */
+};
+#define LAW_TRGT_IF_DDR_1 LAW_TRGT_IF_DDR
+#define LAW_TRGT_IF_PCI_1 LAW_TRGT_IF_PCI
+#define LAW_TRGT_IF_PCIX LAW_TRGT_IF_PCI
+#define LAW_TRGT_IF_PCIE_2 LAW_TRGT_IF_PCI_2
+
+#ifdef CONFIG_MPC8641
+#define LAW_TRGT_IF_PCIE_1 LAW_TRGT_IF_PCI
+#endif
+
+#ifdef CONFIG_MPC8572
+#define LAW_TRGT_IF_PCIE_3 LAW_TRGT_IF_PCI
+#endif
+
+struct law_entry {
+ int index;
+ phys_addr_t addr;
+ enum law_size size;
+ enum law_trgt_if trgt_id;
+};
+
+extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern void disable_law(u8 idx);
+extern void init_laws(void);
+
+/* define in board code */
+extern struct law_entry law_table[];
+extern int num_law_entries;
+#endif
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 34ea295..5b21539 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -30,6 +30,7 @@
#include <asm/types.h>
#include <asm/fsl_i2c.h>
+#include <asm/mpc8xxx_spi.h>
/*
* Local Access Window
@@ -384,20 +385,6 @@
} lbus83xx_t;
/*
- * Serial Peripheral Interface
- */
-typedef struct spi83xx {
- u32 mode; /* mode register */
- u32 event; /* event register */
- u32 mask; /* mask register */
- u32 com; /* command register */
- u8 res0[0x10];
- u32 tx; /* transmit register */
- u32 rx; /* receive register */
- u8 res1[0xFD8];
-} spi83xx_t;
-
-/*
* DMA/Messaging Unit
*/
typedef struct dma83xx {
@@ -627,7 +614,7 @@
u8 res3[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res4[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */
ios83xx_t ios; /* Sequencer */
@@ -661,7 +648,7 @@
u8 res2[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res3[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
u8 res4[0x80];
@@ -696,7 +683,7 @@
u8 res2[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res3[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
u8 res4[0x80];
@@ -741,7 +728,7 @@
u8 res2[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res3[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
u8 res4[0x80];
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 45a4764..ec1ca53 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -418,6 +418,37 @@
#define BOOKE_PAGESZ_256GB 14
#define BOOKE_PAGESZ_1TB 15
+#ifdef CONFIG_E500
+#ifndef __ASSEMBLY__
+extern void set_tlb(u8 tlb, u32 epn, u64 rpn,
+ u8 perms, u8 wimge,
+ u8 ts, u8 esel, u8 tsize, u8 iprot);
+extern void disable_tlb(u8 esel);
+extern void invalidate_tlb(u8 tlb);
+extern void init_tlbs(void);
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
+ { .tlb = _tlb, .epn = _epn, .rpn = _rpn, .perms = _perms, \
+ .wimge = _wimge, .ts = _ts, .esel = _esel, .tsize = _sz, .iprot = _iprot }
+
+struct fsl_e_tlb_entry {
+ u8 tlb;
+ u32 epn;
+ u64 rpn;
+ u8 perms;
+ u8 wimge;
+ u8 ts;
+ u8 esel;
+ u8 tsize;
+ u8 iprot;
+};
+
+extern struct fsl_e_tlb_entry tlb_table[];
+extern int num_tlb_entries;
+#endif
+#endif
+
#if defined(CONFIG_MPC86xx)
#define LAWBAR_BASE_ADDR 0x00FFFFFF
#define LAWAR_TRGT_IF 0x01F00000
diff --git a/include/asm-ppc/mpc8xxx_spi.h b/include/asm-ppc/mpc8xxx_spi.h
new file mode 100644
index 0000000..48b15e4
--- /dev/null
+++ b/include/asm-ppc/mpc8xxx_spi.h
@@ -0,0 +1,48 @@
+/*
+ * Freescale non-CPM SPI Controller
+ *
+ * Copyright 2008 Qstreams Networks, Inc.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_MPC8XXX_SPI_H_
+#define _ASM_MPC8XXX_SPI_H_
+
+#include <asm/types.h>
+
+#if defined(CONFIG_MPC834X) || \
+ defined(CONFIG_MPC8313) || \
+ defined(CONFIG_MPC8315) || \
+ defined(CONFIG_MPC837X)
+
+typedef struct spi8xxx {
+ u8 res0[0x20]; /* 0x0-0x01f reserved */
+ u32 mode; /* mode register */
+ u32 event; /* event register */
+ u32 mask; /* mask register */
+ u32 com; /* command register */
+ u32 tx; /* transmit register */
+ u32 rx; /* receive register */
+ u8 res1[0xFC8]; /* fill up to 0x1000 */
+} spi8xxx_t;
+
+#endif
+
+#endif /* _ASM_MPC8XXX_SPI_H_ */
diff --git a/include/commproc.h b/include/commproc.h
index 6b1b4e8..32a3e1c 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1448,7 +1448,9 @@
*/
#define PROFF_ENET PROFF_SCC2
#define CPM_CR_ENET CPM_CR_CH_SCC2
+#if (!defined(CONFIG_TK885D)) /* TK885D does not use SCC Ethernet */
#define SCC_ENET 1
+#endif
#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index f7020b4..c14376e 100644
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -63,6 +63,8 @@
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
#define CONFIG_SYS_CLK_FREQ 33000000
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
new file mode 100644
index 0000000..4fb6921
--- /dev/null
+++ b/include/configs/DU440.h
@@ -0,0 +1,438 @@
+/*
+ * (C) Copyright 2008
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
+ * based on the Sequoia board configuration by
+ * Stefan Roese, Jacqueline Pira-Ferriol and Alain Saurel
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ **********************************************************************
+ * DU440.h - configuration for esd's DU440 board (Power PC440EPx)
+ **********************************************************************
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_DU440 1 /* Board is esd DU440 */
+#define CONFIG_440EPX 1 /* Specific PPC440EPx */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_SYS_CLK_FREQ 33333400 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+#define CONFIG_LAST_STAGE_INIT 1 /* last_stage_init */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (8 << 20) /* Reserve 8 MB for malloc() */
+
+#define CFG_BOOT_BASE_ADDR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_NAND0_ADDR 0xd0000000 /* NAND Flash */
+#define CFG_NAND1_ADDR 0xd0100000 /* NAND Flash */
+#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+#define CFG_PCI_IOBASE 0xe8000000
+
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+
+#define CFG_USB2D0_BASE 0xe0000100
+#define CFG_USB_DEVICE 0xe0000000
+#define CFG_USB_HOST 0xe0000400
+
+/*
+ * Initial RAM & stack pointer
+ */
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
+#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Serial Port
+ */
+/* TODO: external clock oscillator will be removed */
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*
+ * Video Port
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SMI_LYNXEM
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_BMP_GZIP /* gzip compressed bmp images */
+#define CFG_VIDEO_LOGO_MAX_SIZE (4 << 20) /* for decompressed img */
+#define CFG_DEFAULT_VIDEO_MODE 0x31a /* 1280x1024,16bpp */
+#define CFG_CONSOLE_IS_IN_ENV
+#define CFG_ISA_IO CFG_PCI_IOBASE
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_EEPROM 1 /* use FLASH for environment vars */
+
+/*
+ * FLASH related
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+/* CFI_FLASH_PROTECTION make flash_protect hang sometimes -> disabled */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_OFFSET 0 /* environment starts at */
+ /* the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x1000 /* 4096 bytes may be used for env vars */
+#endif
+
+/*
+ * DDR SDRAM
+ */
+#define CFG_MBYTES_SDRAM (1024) /* 512 MiB TODO: remove */
+#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
+#if 0
+#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */
+#endif
+#define CONFIG_DDR_ECC /* Use ECC when available */
+#define SPD_EEPROM_ADDRESS {0x50}
+#define CONFIG_PROG_SDRAM_TLB
+
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CONFIG_I2C_CMD_TREE 1
+#define CONFIG_I2C_MULTI_BUS 1
+
+#define CFG_SPD_BUS_NUM 0
+#define IIC1_MCP3021_ADDR 0x4d
+#define IIC1_USB2507_ADDR 0x2c
+#ifdef CONFIG_I2C_MULTI_BUS
+#define CFG_I2C_NOPROBES {{1, IIC1_USB2507_ADDR}}
+#endif
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR 0x54
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 5
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
+
+#define CFG_EEPROM_WREN 1
+#define CFG_I2C_BOOT_EEPROM_ADDR 0x52
+
+/*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the TMP401
+ */
+#define CONFIG_DTT_SENSORS { 0, 1 }
+
+/*
+ * The PMC440 uses a TI TMP401 temperature sensor. This part
+ * is basically compatible to the ADM1021 that is supported
+ * by U-Boot.
+ *
+ * - i2c addr 0x4c
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 70 deg
+ * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
+ */
+#define CONFIG_DTT_ADM1021
+#define CFG_DTT_ADM1021 { { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
+
+/*
+ * RTC stuff
+ */
+#define CONFIG_RTC_DS1338
+#define CFG_I2C_RTC_ADDR 0x68
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "ethrotate=no\0" \
+ "hostname=du440\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_self=run ramargs addip addtty optargs;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;" \
+ "bootm\0" \
+ "rootpath=/tftpboot/du440/target_root_du440\0" \
+ "img=/tftpboot/du440/uImage\0" \
+ "kernel_addr=FFC00000\0" \
+ "ramdisk_addr=FFE00000\0" \
+ "initrd_high=30000000\0" \
+ "load=tftp 100000 /tftpboot/du440/u-boot.bin\0" \
+ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
+ "cp.b 100000 FFFA0000 60000\0" \
+ ""
+#if 0
+#define CONFIG_BOOTCOMMAND "run flash_self"
+#endif
+
+#define CONFIG_PREBOOT /* enable preboot variable */
+
+#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#ifndef __ASSEMBLY__
+int du440_phy_addr(int devnum);
+#endif
+
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR du440_phy_addr(0) /* PHY address */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_GIGE 1 /* Include GbE detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 128
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR du440_phy_addr(1)
+
+/*
+ * USB
+ */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
+
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE CFG_USB_HOST
+#define CFG_USB_OHCI_SLOT_NAME "du440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#define CONFIG_SUPPORT_VFAT
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x3f000000 /* 4 ... < 1GB DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * PCI stuff
+ */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+#define CFG_FLASH CFG_FLASH_BASE
+
+#define CFG_CPLD_BASE 0xC0000000
+#define CFG_CPLD_RANGE 0x00000010
+#define CFG_DUMEM_BASE 0xC0100000
+#define CFG_DUMEM_RANGE 0x00100000
+#define CFG_DUIO_BASE 0xC0200000
+#define CFG_DUIO_RANGE 0x00010000
+
+#define CFG_NAND0_CS 2 /* NAND chip connected to CSx */
+#define CFG_NAND1_CS 3 /* NAND chip connected to CSx */
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x04017200
+#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000)
+
+/* Memory Bank 1 (CPLD, 16 bytes needed, but 1MB is minimum) */
+#define CFG_EBC_PB1AP 0x018003c0
+#define CFG_EBC_PB1CR (CFG_CPLD_BASE | 0x18000)
+
+/* Memory Bank 2 (NAND-FLASH) initialization */
+#define CFG_EBC_PB2AP 0x018003c0
+#define CFG_EBC_PB2CR (CFG_NAND0_ADDR | 0x1c000)
+
+/* Memory Bank 3 (NAND-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x018003c0
+#define CFG_EBC_PB3CR (CFG_NAND1_ADDR | 0x1c000)
+
+/* Memory Bank 4 (DUMEM, 1MB) initialization */
+#define CFG_EBC_PB4AP 0x018053c0
+#define CFG_EBC_PB4CR (CFG_DUMEM_BASE | 0x18000)
+
+/* Memory Bank 5 (DUIO, 64KB needed, but 1MB is minimum) */
+#define CFG_EBC_PB5AP 0x018053c0
+#define CFG_EBC_PB5CR (CFG_DUIO_BASE | 0x18000)
+
+/*
+ * NAND FLASH
+ */
+#define CFG_MAX_NAND_DEVICE 2
+#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE
+#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+#define CFG_NAND_BASE_LIST {CFG_NAND0_ADDR + CFG_NAND0_CS, \
+ CFG_NAND1_ADDR + CFG_NAND1_CS}
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#if 0
+#define CONFIG_SHOW_ACTIVITY 1
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
new file mode 100644
index 0000000..ab574d5
--- /dev/null
+++ b/include/configs/M52277EVB.h
@@ -0,0 +1,251 @@
+/*
+ * Configuation settings for the Freescale MCF52277 EVB board.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M52277EVB_H
+#define _M52277EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF5227x /* define processor family */
+#define CONFIG_M52277 /* define processor type */
+#define CONFIG_M52277EVB /* M52277EVB board */
+
+#undef DEBUG
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#define CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_BMP
+
+#define CONFIG_HOSTNAME M52277EVB
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
+ "loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off 0 0x3ffff;" \
+ "era 0 3ffff;" \
+ "cp.b ${loadaddr} 0 ${filesize};" \
+ "save\0" \
+ ""
+
+/* LCD */
+#ifdef CONFIG_CMD_BMP
+#define CONFIG_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_LCD_LOGO
+#define CONFIG_SHARP_LQ035Q7DH06
+#endif
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CFG_USB_EHCI_REGS_BASE 0xFC0B0000
+#define CFG_USB_EHCI_CPU_INIT
+#endif
+
+/* Realtime clock */
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+#define CFG_RTC_OSCILLATOR (32 * CFG_HZ)
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2c */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_OFFSET 0x58000
+#define CFG_IMMR CFG_MBAR
+
+/* Input, PCI, Flexbus, and VCO */
+#define CONFIG_EXTRA_CLOCK
+
+#define CFG_INPUT_CLKSRC 16000000
+
+#define CONFIG_PRAM 512 /* 512 KB */
+
+#define CFG_PROMPT "-> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000)
+
+#define CFG_HZ 1000
+
+#define CFG_MBAR 0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x80000000
+#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
+#define CFG_INIT_RAM_CTRL 0x21
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x40000000
+#define CFG_SDRAM_SIZE 64 /* SDRAM size in MB */
+#define CFG_SDRAM_CFG1 0x43711630
+#define CFG_SDRAM_CFG2 0x56670000
+#define CFG_SDRAM_CTRL 0xE1092000
+#define CFG_SDRAM_EMOD 0x81810000
+#define CFG_SDRAM_MODE 0x00CD0000
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
+#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#define CFG_BOOTPARAMS_LEN 64*1024
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OVERWRITE 1
+#undef CFG_ENV_IS_EMBEDDED
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_BASE CFG_CS0_BASE
+#define CFG_FLASH0_BASE CFG_CS0_BASE
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x8000)
+#define CFG_ENV_SECT_SIZE 0x8000
+
+#define CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+
+# define CFG_FLASH_CFI_DRIVER 1
+# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+# define CFG_FLASH_CHECKSUM
+#endif
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
+ */
+#ifdef CONFIG_CMD_JFFS2
+# define CONFIG_JFFS2_DEV "nor0"
+# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x40000)
+# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x40000)
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+/*
+ * CS0 - NOR Flash
+ * CS1 - Available
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+
+#define CFG_CS0_BASE 0x00000000
+#define CFG_CS0_MASK 0x00FF0001
+#define CFG_CS0_CTRL 0x00001FA0
+
+#endif /* _M52277EVB_H */
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 47d74a3..e956739 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -213,7 +213,7 @@
#ifdef NANDFLASH_SIZE
# define CFG_MAX_NAND_DEVICE 1
-# define CFG_NAND_BASE (CFG_CS2_BASE << 16)
+# define CFG_NAND_BASE CFG_CS2_BASE
# define CFG_NAND_SIZE 1
# define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
# define NAND_MAX_CHIPS 1
@@ -224,7 +224,7 @@
# define CONFIG_JFFS2_PART_OFFSET 0x00000000
#endif
-#define CFG_FLASH_BASE (CFG_CS0_BASE << 16)
+#define CFG_FLASH_BASE CFG_CS0_BASE
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
@@ -254,12 +254,12 @@
#define CFG_CS0_MASK 0x007f0001
#define CFG_CS0_CTRL 0x00001fa0
-#define CFG_CS1_BASE 0x1000
+#define CFG_CS1_BASE 0x10000000
#define CFG_CS1_MASK 0x001f0001
#define CFG_CS1_CTRL 0x002A3780
#ifdef NANDFLASH_SIZE
-#define CFG_CS2_BASE 0x2000
+#define CFG_CS2_BASE 0x20000000
#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1)
#define CFG_CS2_CTRL 0x00001f60
#endif
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
new file mode 100644
index 0000000..6bfffa1
--- /dev/null
+++ b/include/configs/M5373EVB.h
@@ -0,0 +1,267 @@
+/*
+ * Configuation settings for the Freescale MCF5373 FireEngine board.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M5373EVB_H
+#define _M5373EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF532x /* define processor family */
+#define CONFIG_M5373 /* define processor type */
+
+#undef DEBUG
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#ifdef NANDFLASH_SIZE
+# define CONFIG_CMD_NAND
+#endif
+
+#define CFG_UNIFY_CACHE
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MII 1
+# define CFG_DISCOVER_PHY
+# define CFG_RX_ETH_BUFFER 8
+# define CFG_FAULT_ECHO_LINK_DOWN
+
+# define CFG_FEC0_PINMUX 0
+# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define MCFFEC_TOUT_LOOP 50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CFG_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CFG_FAULT_ECHO_LINK_DOWN
+# define CFG_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CFG_DISCOVER_PHY */
+#endif
+
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C /* I2C with hw support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 80000
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_OFFSET 0x58000
+#define CFG_IMMR CFG_MBAR
+
+#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#ifdef CONFIG_MCFFEC
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_IPADDR 192.162.1.2
+# define CONFIG_NETMASK 255.255.255.0
+# define CONFIG_SERVERIP 192.162.1.1
+# define CONFIG_GATEWAYIP 192.162.1.1
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif /* FEC_ENET */
+
+#define CONFIG_HOSTNAME M5373EVB
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off 0 2ffff;" \
+ "era 0 2ffff;" \
+ "cp.b ${loadaddr} 0 ${filesize};" \
+ "save\0" \
+ ""
+
+#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PROMPT "-> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x40010000
+
+#define CFG_HZ 1000
+#define CFG_CLK 80000000
+#define CFG_CPU_CLK CFG_CLK * 3
+
+#define CFG_MBAR 0xFC000000
+
+#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x80000000
+#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
+#define CFG_INIT_RAM_CTRL 0x221
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x40000000
+#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */
+#define CFG_SDRAM_CFG1 0x53722730
+#define CFG_SDRAM_CFG2 0x56670000
+#define CFG_SDRAM_CTRL 0xE1092000
+#define CFG_SDRAM_EMOD 0x40010000
+#define CFG_SDRAM_MODE 0x018D0000
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
+#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+
+#define CFG_BOOTPARAMS_LEN 64*1024
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+# define CFG_FLASH_CFI_DRIVER 1
+# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+#endif
+
+#ifdef NANDFLASH_SIZE
+# define CFG_MAX_NAND_DEVICE 1
+# define CFG_NAND_BASE CFG_CS2_BASE
+# define CFG_NAND_SIZE 1
+# define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
+# define NAND_MAX_CHIPS 1
+# define NAND_ALLOW_ERASE_ALL 1
+# define CONFIG_JFFS2_NAND 1
+# define CONFIG_JFFS2_DEV "nand0"
+# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1)
+# define CONFIG_JFFS2_PART_OFFSET 0x00000000
+#endif
+
+#define CFG_FLASH_BASE CFG_CS0_BASE
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_OFFSET 0x4000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_IS_EMBEDDED 1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash 1, 2, 4, or 8MB
+ * CS1 - CompactFlash and registers
+ * CS2 - NAND Flash 16, 32, or 64MB
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CFG_CS0_BASE 0
+#define CFG_CS0_MASK 0x007f0001
+#define CFG_CS0_CTRL 0x00001fa0
+
+#define CFG_CS1_BASE 0x10000000
+#define CFG_CS1_MASK 0x001f0001
+#define CFG_CS1_CTRL 0x002A3780
+
+#ifdef NANDFLASH_SIZE
+#define CFG_CS2_BASE 0x20000000
+#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1)
+#define CFG_CS2_CTRL 0x00001f60
+#endif
+
+#endif /* _M5373EVB_H */
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 211f11d..581c794 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -176,6 +176,10 @@
/* PCI */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#define CONFIG_SKIPPCI_HOSTBRIDGE
+
+#define CFG_PCI_CACHE_LINE_SIZE 4
#define CFG_PCI_MEM_BUS 0xA0000000
#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS
@@ -192,9 +196,7 @@
/* FPGA - Spartan 2 */
/* experiment
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_FPGA CFG_SPARTAN3
#define CONFIG_FPGA_COUNT 1
#define CFG_FPGA_PROG_FEEDBACK
#define CFG_FPGA_CHECK_CTRLC
@@ -286,9 +288,9 @@
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
# define CFG_ENV_SECT_SIZE 0x2000
#else
-# define CFG_FLASH_BASE CFG_FLASH0_BASE
-# define CFG_FLASH0_BASE CFG_CS1_BASE
-# define CFG_FLASH1_BASE CFG_CS0_BASE
+# define CFG_FLASH_BASE CFG_CS0_BASE
+# define CFG_FLASH0_BASE CFG_CS0_BASE
+# define CFG_FLASH1_BASE CFG_CS1_BASE
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
# define CFG_ENV_SECT_SIZE 0x20000
#endif
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
new file mode 100644
index 0000000..84c2105
--- /dev/null
+++ b/include/configs/M5475EVB.h
@@ -0,0 +1,311 @@
+/*
+ * Configuation settings for the Freescale MCF5475 board.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M5475EVB_H
+#define _M5475EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF547x_8x /* define processor family */
+#define CONFIG_M547x /* define processor type */
+#define CONFIG_M5475 /* define processor type */
+
+#undef DEBUG
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+#define CONFIG_SLTTMR
+
+#define CONFIG_FSLDMAFEC
+#ifdef CONFIG_FSLDMAFEC
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MII 1
+# define CONFIG_HAS_ETH1
+
+# define CFG_DISCOVER_PHY
+# define CFG_RX_ETH_BUFFER 32
+# define CFG_TX_ETH_BUFFER 48
+# define CFG_FAULT_ECHO_LINK_DOWN
+
+# define CFG_FEC0_PINMUX 0
+# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define CFG_FEC1_PINMUX 0
+# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
+
+# define MCFFEC_TOUT_LOOP 50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CFG_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CFG_FAULT_ECHO_LINK_DOWN
+# define CFG_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CFG_DISCOVER_PHY */
+
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
+# define CONFIG_IPADDR 192.162.1.2
+# define CONFIG_NETMASK 255.255.255.0
+# define CONFIG_SERVERIP 192.162.1.1
+# define CONFIG_GATEWAYIP 192.162.1.1
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#endif
+
+#ifdef CONFIG_CMD_USB
+# define CONFIG_USB_OHCI_NEW
+# define CONFIG_USB_STORAGE
+
+# ifndef CONFIG_CMD_PCI
+# define CONFIG_CMD_PCI
+# endif
+# define CONFIG_PCI_OHCI
+# define CONFIG_DOS_PARTITION
+
+# undef CFG_USB_OHCI_BOARD_INIT
+# undef CFG_USB_OHCI_CPU_INIT
+# define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+# define CFG_USB_OHCI_SLOT_NAME "isp1561"
+# define CFG_OHCI_SWAP_REG_ACCESS
+#endif
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C /* I2C with hw support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 80000
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_OFFSET 0x00008F00
+#define CFG_IMMR CFG_MBAR
+
+/* PCI */
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#define CONFIG_SKIPPCI_HOSTBRIDGE
+
+#define CFG_PCI_CACHE_LINE_SIZE 8
+
+#define CFG_PCI_MEM_BUS 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS
+#define CFG_PCI_MEM_SIZE 0x10000000
+
+#define CFG_PCI_IO_BUS 0x71000000
+#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS
+#define CFG_PCI_IO_SIZE 0x01000000
+
+#define CFG_PCI_CFG_BUS 0x70000000
+#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
+#define CFG_PCI_CFG_SIZE 0x01000000
+#endif
+
+#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#ifdef CONFIG_MCFFEC
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_IPADDR 192.162.1.2
+# define CONFIG_NETMASK 255.255.255.0
+# define CONFIG_SERVERIP 192.162.1.1
+# define CONFIG_GATEWAYIP 192.162.1.1
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif /* FEC_ENET */
+
+#define CONFIG_HOSTNAME M547xEVB
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=10000\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off bank 1;" \
+ "era ff800000 ff82ffff;" \
+ "cp.b ${loadaddr} ff800000 ${filesize};"\
+ "save\0" \
+ ""
+
+#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PROMPT "-> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00010000
+
+#define CFG_HZ 1000
+#define CFG_CLK CFG_BUSCLK
+#define CFG_CPU_CLK CFG_CLK * 2
+
+#define CFG_MBAR 0xF0000000
+#define CFG_INTSRAM (CFG_MBAR + 0x10000)
+#define CFG_INTSRAMSZ 0x8000
+
+/*#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)*/
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0xF2000000
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
+#define CFG_INIT_RAM_CTRL 0x21
+#define CFG_INIT_RAM1_ADDR (CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END)
+#define CFG_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */
+#define CFG_INIT_RAM1_CTRL 0x21
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_CFG1 0x73711630
+#define CFG_SDRAM_CFG2 0x46370000
+#define CFG_SDRAM_CTRL 0xE10B0000
+#define CFG_SDRAM_EMOD 0x40010000
+#define CFG_SDRAM_MODE 0x018D0000
+#define CFG_SDRAM_DRVSTRENGTH 0x000002AA
+#ifdef CFG_DRAMSZ1
+# define CFG_SDRAM_SIZE (CFG_DRAMSZ + CFG_DRAMSZ1)
+#else
+# define CFG_SDRAM_SIZE CFG_DRAMSZ
+#endif
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
+#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+
+#define CFG_BOOTPARAMS_LEN 64*1024
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+# define CFG_FLASH_BASE (CFG_CS0_BASE)
+# define CFG_FLASH_CFI_DRIVER 1
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+# define CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CFG_NOR1SZ
+# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+# define CFG_FLASH_SIZE ((CFG_NOR1SZ + CFG_BOOTSZ) << 20)
+# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE }
+#else
+# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CFG_FLASH_SIZE (CFG_BOOTSZ << 20)
+#endif
+#endif
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_OFFSET 0x2000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_IS_EMBEDDED 1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash 1, 2, 4, or 8MB
+ * CS1 - NOR Flash
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CFG_CS0_BASE 0xFF800000
+#define CFG_CS0_MASK (((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS0_CTRL 0x00101980
+
+#ifdef CFG_NOR1SZ
+#define CFG_CS1_BASE 0xF8000000
+#define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS1_CTRL 0x00000D80
+#endif
+
+#endif /* _M5475EVB_H */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
new file mode 100644
index 0000000..e9e5ee9
--- /dev/null
+++ b/include/configs/M5485EVB.h
@@ -0,0 +1,296 @@
+/*
+ * Configuation settings for the Freescale MCF5485 FireEngine board.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M5485EVB_H
+#define _M5485EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF547x_8x /* define processor family */
+#define CONFIG_M548x /* define processor type */
+#define CONFIG_M5485 /* define processor type */
+
+#undef DEBUG
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+#define CONFIG_SLTTMR
+
+#define CONFIG_FSLDMAFEC
+#ifdef CONFIG_FSLDMAFEC
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MII 1
+# define CONFIG_HAS_ETH1
+
+# define CFG_DISCOVER_PHY
+# define CFG_RX_ETH_BUFFER 32
+# define CFG_TX_ETH_BUFFER 48
+# define CFG_FAULT_ECHO_LINK_DOWN
+
+# define CFG_FEC0_PINMUX 0
+# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define CFG_FEC1_PINMUX 0
+# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
+
+# define MCFFEC_TOUT_LOOP 50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CFG_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CFG_FAULT_ECHO_LINK_DOWN
+# define CFG_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CFG_DISCOVER_PHY */
+
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
+# define CONFIG_IPADDR 192.162.1.2
+# define CONFIG_NETMASK 255.255.255.0
+# define CONFIG_SERVERIP 192.162.1.1
+# define CONFIG_GATEWAYIP 192.162.1.1
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#endif
+
+#ifdef CONFIG_CMD_USB
+# define CONFIG_USB_STORAGE
+# define CONFIG_DOS_PARTITION
+# define CONFIG_USB_OHCI_NEW
+# ifndef CONFIG_CMD_PCI
+# define CONFIG_CMD_PCI
+# endif
+/*# define CONFIG_PCI_OHCI*/
+# define CFG_USB_OHCI_REGS_BASE 0x80041000
+# define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+# define CFG_USB_OHCI_SLOT_NAME "isp1561"
+# define CFG_OHCI_SWAP_REG_ACCESS
+#endif
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C /* I2C with hw support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 80000
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_OFFSET 0x00008F00
+#define CFG_IMMR CFG_MBAR
+
+/* PCI */
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+
+#define CFG_PCI_MEM_BUS 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS
+#define CFG_PCI_MEM_SIZE 0x10000000
+
+#define CFG_PCI_IO_BUS 0x71000000
+#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS
+#define CFG_PCI_IO_SIZE 0x01000000
+
+#define CFG_PCI_CFG_BUS 0x70000000
+#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
+#define CFG_PCI_CFG_SIZE 0x01000000
+#endif
+
+#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#define CONFIG_HOSTNAME M548xEVB
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=10000\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off bank 1;" \
+ "era ff800000 ff82ffff;" \
+ "cp.b ${loadaddr} ff800000 ${filesize};"\
+ "save\0" \
+ ""
+
+#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PROMPT "-> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00010000
+
+#define CFG_HZ 1000
+#define CFG_CLK CFG_BUSCLK
+#define CFG_CPU_CLK CFG_CLK * 2
+
+#define CFG_MBAR 0xF0000000
+#define CFG_INTSRAM (CFG_MBAR + 0x10000)
+#define CFG_INTSRAMSZ 0x8000
+
+/*#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)*/
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0xF2000000
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
+#define CFG_INIT_RAM_CTRL 0x21
+#define CFG_INIT_RAM1_ADDR (CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END)
+#define CFG_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */
+#define CFG_INIT_RAM1_CTRL 0x21
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_CFG1 0x73711630
+#define CFG_SDRAM_CFG2 0x46370000
+#define CFG_SDRAM_CTRL 0xE10B0000
+#define CFG_SDRAM_EMOD 0x40010000
+#define CFG_SDRAM_MODE 0x018D0000
+#define CFG_SDRAM_DRVSTRENGTH 0x000002AA
+#ifdef CFG_DRAMSZ1
+# define CFG_SDRAM_SIZE (CFG_DRAMSZ + CFG_DRAMSZ1)
+#else
+# define CFG_SDRAM_SIZE CFG_DRAMSZ
+#endif
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
+#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+
+#define CFG_BOOTPARAMS_LEN 64*1024
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+# define CFG_FLASH_BASE (CFG_CS0_BASE)
+# define CFG_FLASH_CFI_DRIVER 1
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+# define CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CFG_NOR1SZ
+# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+# define CFG_FLASH_SIZE ((CFG_NOR1SZ + CFG_BOOTSZ) << 20)
+# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE }
+#else
+# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CFG_FLASH_SIZE (CFG_BOOTSZ << 20)
+#endif
+#endif
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_OFFSET 0x2000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_IS_EMBEDDED 1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash 1, 2, 4, or 8MB
+ * CS1 - NOR Flash
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CFG_CS0_BASE 0xFF800000
+#define CFG_CS0_MASK (((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS0_CTRL 0x00101980
+
+#ifdef CFG_NOR1SZ
+#define CFG_CS1_BASE 0xF8000000
+#define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS1_CTRL 0x00000D80
+#endif
+
+#endif /* _M5485EVB_H */
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 455bbe0..f12a3e6 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -76,10 +76,10 @@
* seem to have the SPD connected to I2C.
*/
#define CFG_DDR_SIZE 128 /* MB */
-#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \
- | 0x00040000 /* TODO */ \
+#define CFG_DDR_CONFIG ( CSCONFIG_EN \
+ | 0x00010000 /* TODO */ \
| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
- /* 0x80840102 */
+ /* 0x80010102 */
#define CFG_DDR_TIMING_3 0x00000000
#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
@@ -92,25 +92,25 @@
| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
/* 0x00220802 */
#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
- | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+ | ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
- | (13 << TIMING_CFG1_REFREC_SHIFT ) \
+ | (10 << TIMING_CFG1_REFREC_SHIFT ) \
| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
- /* 0x3935d322 */
-#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \
- | (31 << TIMING_CFG2_CPO_SHIFT ) \
+ /* 0x3835a322 */
+#define CFG_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+ | ( 5 << TIMING_CFG2_CPO_SHIFT ) \
| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
- | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) )
- /* 0x0f9048ca */ /* P9-45,may need tuning */
-#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
- | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
- /* 0x03200064 */
+ | ( 6 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+ /* 0x129048c6 */ /* P9-45,may need tuning */
+#define CFG_DDR_INTERVAL ( ( 1296 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+ | ( 1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+ /* 0x05100500 */
#if defined(CONFIG_DDR_2T_TIMING)
#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \
| SDRAM_CFG_SDRAM_TYPE_DDR2 \
@@ -124,9 +124,9 @@
#endif
#define CFG_SDRAM_CFG2 0x00401000;
/* set burst length to 8 for 32-bit data path */
-#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \
- | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
- /* 0x44400232 */
+#define CFG_DDR_MODE ( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
+ | ( 0x0632 << SDRAM_MODE_SD_SHIFT ) )
+ /* 0x44480632 */
#define CFG_DDR_MODE_2 0x8000C000;
#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
new file mode 100644
index 0000000..ad2305c
--- /dev/null
+++ b/include/configs/MPC8315ERDB.h
@@ -0,0 +1,547 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_MPC83XX 1 /* MPC83xx family */
+#define CONFIG_MPC831X 1 /* MPC831x CPU family */
+#define CONFIG_MPC8315 1 /* MPC8315 CPU specific */
+#define CONFIG_MPC8315ERDB 1 /* MPC8315ERDB board specific */
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66.66MHz, then
+ * CSB = 133MHz, CORE = 400MHz, DDRC = 266MHz, LBC = 133MHz
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_SVCOD_DIV_2 |\
+ HRCWL_CSB_TO_CLKIN_2X1 |\
+ HRCWL_CORE_TO_CSB_3X1)
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LALE_NORMAL)
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH 0x00000000
+#define CFG_SICRL 0x00000000 /* 3.3V, no delay */
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR 0xE0000000
+
+/*
+ * Arbiter Setup
+ */
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
+#define CFG_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CFG_DDRCDR_VALUE ( DDRCDR_EN \
+ | DDRCDR_PZ_LOZ \
+ | DDRCDR_NZ_LOZ \
+ | DDRCDR_ODT \
+ | DDRCDR_Q_DRN )
+ /* 0x7b880001 */
+/*
+ * Manually set up DDR parameters
+ * consist of two chips HY5PS12621BFP-C4 from HYNIX
+ */
+#define CFG_DDR_SIZE 128 /* MB */
+#define CFG_DDR_CS0_BNDS 0x00000007
+#define CFG_DDR_CS0_CONFIG ( CSCONFIG_EN \
+ | 0x00010000 /* ODT_WR to CSn */ \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
+ /* 0x80010102 */
+#define CFG_DDR_TIMING_3 0x00000000
+#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+ | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+ /* 0x00220802 */
+#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+ | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+ | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+ | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+ /* 0x39356222 */
+#define CFG_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+ | ( 4 << TIMING_CFG2_CPO_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+ | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+ | ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+ /* 0x121048c7 */
+#define CFG_DDR_INTERVAL ( ( 0x0360 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+ | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+ /* 0x03600100 */
+#define CFG_DDR_SDRAM_CFG ( SDRAM_CFG_SREN \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
+ | SDRAM_CFG_32_BE )
+ /* 0x43080000 */
+#define CFG_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */
+#define CFG_DDR_MODE ( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
+ | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+ /* ODT 150ohm CL=3, AL=1 on SDRAM */
+#define CFG_DDR_MODE2 0x00000000
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00040000 /* memtest region */
+#define CFG_MEMTEST_END 0x00140000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CFG_LBC_LBCR 0x00040000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 8 /* FLASH size is 8M */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */
+
+#define CFG_BR0_PRELIM ( CFG_FLASH_BASE /* Flash Base address */ \
+ | (2 << BR_PS_SHIFT) /* 16 bit port size */ \
+ | BR_V ) /* valid */
+#define CFG_OR0_PRELIM ( (~(CFG_FLASH_SIZE - 1) << 20) \
+ | OR_UPM_XAM \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_ACS_0b11 \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_15 \
+ | OR_GPCM_TRLX \
+ | OR_GPCM_EHTR \
+ | OR_GPCM_EAD )
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 135 /* 127 64KB sectors and 8 8KB top sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+
+#define CFG_BR1_PRELIM ( CFG_NAND_BASE \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V ) /* valid */
+#define CFG_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR )
+ /* 0xFFFF8396 */
+
+#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * Board info - revision and where boot from
+ */
+#define CFG_I2C_PCF8574A_ADDR 0x39
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1337 /* ds1339 on board, use ds1337 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE 0x90000000
+#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_PHYS 0xE0300000
+#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS 0x00000000
+#define CFG_PCI_SLV_MEM_SIZE 0x80000000
+
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#define CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define TSEC1_PHY_ADDR 0
+#define TSEC2_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC2_FLAGS TSEC_GIGABIT
+
+/* Options are: eTSEC[0-1] */
+#define CONFIG_ETHPRIME "eTSEC1"
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_PCI
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+#define CFG_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U CFG_IBAT2U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT3L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT3U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* PCI MEM space: cacheable */
+#define CFG_IBAT4L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT5L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+
+#define CFG_IBAT6L 0
+#define CFG_IBAT6U 0
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+
+#define CFG_IBAT7L 0
+#define CFG_IBAT7U 0
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 04:00:00:00:00:0A
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 04:00:00:00:00:0B
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=ramfs.83xx\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc8315erdb.dtb\0" \
+ ""
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 4ea8709..295e785 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -321,7 +321,7 @@
* QE UEC ethernet configuration
*/
#define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME "Freescale GETH"
+#define CONFIG_ETHPRIME "FSL UEC0"
#define CONFIG_UEC_ETH1 /* ETH3 */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 25ac58c..6c0e68a 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -377,7 +377,7 @@
* QE UEC ethernet configuration
*/
#define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME "Freescale GETH"
+#define CONFIG_ETHPRIME "FSL UEC0"
#define CONFIG_UEC_ETH1 /* ETH3 */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 437a9a5..07f2f30 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -355,6 +355,15 @@
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
+/* SPI */
+#define CONFIG_HARD_SPI /* SPI with hardware support */
+#undef CONFIG_SOFT_SPI /* SPI bit-banged */
+
+/* GPIOs. Used as SPI chip selects */
+#define CFG_GPIO1_PRELIM
+#define CFG_GPIO1_DIR 0xC0000000 /* SPI CS on 0, LED on 1 */
+#define CFG_GPIO1_DAT 0xC0000000 /* Both are active LOW */
+
/* TSEC */
#define CFG_TSEC1_OFFSET 0x24000
#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index fdacb90..168ca2a 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -405,7 +405,7 @@
* QE UEC ethernet configuration
*/
#define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME "Freescale GETH"
+#define CONFIG_ETHPRIME "FSL UEC0"
#define CONFIG_PHY_MODE_NEED_CHANGE
#define CONFIG_UEC_ETH1 /* GETH1 */
@@ -466,6 +466,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_SDRAM
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 0f6f8f1..83a4b1e 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -282,7 +282,7 @@
* QE UEC ethernet configuration
*/
#define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME "Freescale GETH"
+#define CONFIG_ETHPRIME "FSL UEC0"
#define CONFIG_UEC_ETH1 /* GETH1 */
@@ -387,15 +387,6 @@
#define CFG_HID2 HID2_HBE
/*
- * Cache Config
- */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
-#endif
-
-/*
* MMU Setup
*/
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
new file mode 100644
index 0000000..2da4f29
--- /dev/null
+++ b/include/configs/MPC837XERDB.h
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Kevin Lam <kevin.lam@freescale.com>
+ * Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC837X 1 /* MPC837X CPU specific */
+#define CONFIG_MPC837XERDB 1
+
+#define CONFIG_PCI 1
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK 66666667 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
+#define CONFIG_83XX_GENERIC_PCI 1
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_SVCOD_DIV_2 |\
+ HRCWL_CSB_TO_CLKIN_5X1 |\
+ HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_AGENT |\
+ HRCWH_PCI1_ARBITER_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LDP_CLEAR)
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LDP_CLEAR)
+#endif
+
+/* System performance - define the value i.e. CFG_XXX
+*/
+
+/* Arbiter Configuration Register */
+#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
+
+/* System Priority Control Regsiter */
+#define CFG_SPCR_TSECEP 3 /* eTSEC1&2 emergency priority (0-3) */
+
+/* System Clock Configuration Register */
+#define CFG_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */
+#define CFG_SCCR_SATACM SCCR_SATACM_1 /* SATA1-4 clock mode (0-3) */
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH 0x08200000
+#define CFG_SICRL 0x00000000
+
+/*
+ * Output Buffer Impedance
+ */
+#define CFG_OBIR 0x30100000
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL 0x03000000
+#define CFG_83XX_DDR_USES_CS0
+
+#define CFG_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN)
+
+#undef CONFIG_DDR_ECC /* support DDR ECC function */
+#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
+
+#undef CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
+
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE 256 /* MB */
+#define CFG_DDR_CS0_BNDS 0x0000000f
+#define CFG_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_ODT_WR_ACS \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+
+#define CFG_DDR_TIMING_3 0x00000000
+#define CFG_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
+ | (0 << TIMING_CFG0_WRT_SHIFT) \
+ | (0 << TIMING_CFG0_RRT_SHIFT) \
+ | (0 << TIMING_CFG0_WWT_SHIFT) \
+ | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
+ | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
+ | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
+ | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
+ /* 0x00220802 */
+ /* 0x00260802 */ /* DDR400 */
+#define CFG_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
+ | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
+ | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
+ | (7 << TIMING_CFG1_CASLAT_SHIFT) \
+ | (13 << TIMING_CFG1_REFREC_SHIFT) \
+ | (3 << TIMING_CFG1_WRREC_SHIFT) \
+ | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
+ | (2 << TIMING_CFG1_WRTORD_SHIFT))
+ /* 0x3935d322 */
+ /* 0x3937d322 */
+#define CFG_DDR_TIMING_2 0x02984cc8
+
+#define CFG_DDR_INTERVAL ((1545 << SDRAM_INTERVAL_REFINT_SHIFT) \
+ | (256 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
+ /* 0x06090100 */
+
+#if defined(CONFIG_DDR_2T_TIMING)
+#define CFG_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
+ | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+ | SDRAM_CFG_2T_EN \
+ | SDRAM_CFG_DBW_32)
+#else
+#define CFG_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
+ | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT)
+ /* 0x43000000 */
+#endif
+#define CFG_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */
+#define CFG_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \
+ | (0x0442 << SDRAM_MODE_SD_SHIFT))
+ /* 0x04400442 */ /* DDR400 */
+#define CFG_DDR_MODE2 0x00000000;
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00040000 /* memtest region */
+#define CFG_MEMTEST_END 0x0ef70010
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CFG_LBC_LBCR 0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 8 /* max FLASH size is 32M */
+
+#define CFG_FLASH_EMPTY_INFO /* display empty sectors */
+#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM (0xFF800000 /* 8 MByte */ \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_9 \
+ | OR_GPCM_EHTR \
+ | OR_GPCM_EAD)
+ /* 0xFF806FF7 TODO SLOW 8 MB flash size */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_VSC7385_BASE 0xF0000000
+
+/* VSC7385 Gigabit Switch support */
+#define CONFIG_VSC7385_ENET
+#define CFG_BR2_PRELIM 0xf0000801 /* Base address */
+#define CFG_OR2_PRELIM 0xfffe09ff /* 128K bytes*/
+#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE /* Access Base */
+#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access Size 128K */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE 0x90000000
+#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_PHYS 0xE0300000
+#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS 0x00000000
+#define CFG_PCI_SLV_MEM_SIZE 0x80000000
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+#endif /* CONFIG_PCI */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_GMII 1 /* MII PHY management */
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 0x1c
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE+CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for env */
+ #define CFG_ENV_SIZE 0x4000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
+#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
+
+#define CFG_IBAT0L (CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+#define CFG_IBAT1L (CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+
+/* L2 Switch: cache-inhibit and guarded */
+#define CFG_IBAT3L (CFG_VSC7385_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT3U (CFG_VSC7385_BASE | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT4L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#else
+#define CFG_IBAT6L (0)
+#define CFG_IBAT6U (0)
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_HAS_ETH0 /* add support for "ethaddr" */
+#define CONFIG_ETHADDR 00:04:9f:ef:04:01
+#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */
+#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02
+
+#define CONFIG_IPADDR 10.0.0.2
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+#define CONFIG_NETMASK 255.0.0.0
+#define CONFIG_NETDEV eth1
+
+#define CONFIG_HOSTNAME mpc837x_rdb
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
+#define CONFIG_FDTFILE mpc837x_rdb.dtb
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#define CONFIG_BAUDRATE 115200
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftp $loadaddr $uboot;" \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \
+ "console=ttyS0\0" \
+ "setbootargs=setenv bootargs " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+ "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv rootdev /dev/nfs;" \
+ "run setbootargs;" \
+ "run setipargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv rootdev /dev/ram;" \
+ "run setbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index afce7fb..5ea7b25 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -55,6 +55,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* sysclk for MPC85xx
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 2868dcb..bf64f27 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -43,6 +43,8 @@
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
/* Using Localbus SDRAM to emulate flash before we can program the flash,
* normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
* Not availabe for EVAL board
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index c83382f..7334088 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -47,6 +47,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* When initializing flash, if we cannot find the manufacturer ID,
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 5a96db5..a894209 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -42,6 +42,8 @@
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 90beb25..a3db9f4 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -55,6 +55,7 @@
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* When initializing flash, if we cannot find the manufacturer ID,
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 76d673c..93877ae 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -47,6 +47,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* When initializing flash, if we cannot find the manufacturer ID,
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 5f10555..08884b3 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -52,6 +52,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* sysclk for MPC85xx
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 2b089d9..a12d193 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -49,6 +49,7 @@
/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* When initializing flash, if we cannot find the manufacturer ID,
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index eb6ccb6..a53953c 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -141,6 +141,9 @@
#endif
#define CFG_ID_EEPROM
+#ifdef CFG_ID_EEPROM
+#define CONFIG_ID_EEPROM
+#endif
#define ID_EEPROM_ADDR 0x57
@@ -312,11 +315,8 @@
#define CONFIG_CMD_NET
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_RTL8139
-#define CONFIG_SK98
-#define CONFIG_EEPRO100
-#define CONFIG_TULIP
-#ifdef CONFIG_TULIP
+#define CONFIG_ULI526X
+#ifdef CONFIG_ULI526X
#define CONFIG_ETHADDR 00:E0:0C:00:00:01
#endif
@@ -493,6 +493,7 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 7f485c6..985182f 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -152,6 +152,9 @@
#endif
#define CFG_ID_EEPROM 1
+#ifdef CFG_ID_EEPROM
+#define CONFIG_ID_EEPROM
+#endif
#define ID_EEPROM_ADDR 0x57
/*
@@ -552,6 +555,7 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index f0d0399..819bee7 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -51,6 +51,7 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_MEM_INIT_VALUE 0xDEADBEEF
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* sysclk for MPC85xx
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index ae2645c..8902f42 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -51,6 +51,7 @@
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_MEM_INIT_VALUE 0xDEADBEEF
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* sysclk for MPC85xx
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 67bf4b1..e8b405a 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -385,7 +385,7 @@
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -503,7 +503,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 3ca85b8..2bbfe9a 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -56,6 +56,7 @@
#undef CONFIG_PCI /* pci ethernet support */
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 761a352..c43fef6 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -64,6 +64,8 @@
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ethprime=FEC ETHERNET\0" \
+ "ethact=FEC ETHERNET\0" \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
@@ -77,7 +79,8 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM885D/uImage\0" \
+ "bootfile=/tftpboot/tk885d/uImage\0" \
+ "u-boot=/tftpboot/tk885d/u-boot.bin\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
"load=tftp 200000 ${u-boot}\0" \
@@ -254,7 +257,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */
-#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index f3b1a53..dd0654b 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -50,6 +50,8 @@
#define CONFIG_CPM2 1 /* has CPM2 */
#endif
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
/*
* sysclk for MPC85xx
*
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index a4de552..ce458ae5 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -295,7 +295,7 @@
* to 0xFFFF, watchdog timeouts after about 64s. For details refer
* to chapter 36 of the MPC5121e Reference Manual.
*/
-#define CONFIG_WATCHDOG /* enable watchdog */
+/* #define CONFIG_WATCHDOG */ /* enable watchdog */
#define CFG_WATCHDOG_VALUE 0xFFFF
/*
@@ -306,9 +306,9 @@
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
- #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
@@ -340,8 +340,8 @@
*
* Boot Flags
*/
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
@@ -351,7 +351,7 @@
/*
* Environment Configuration
*/
-#define CONFIG_ENV_OVERWRITE
+#define CONFIG_TIMESTAMP
#define CONFIG_HOSTNAME ads5121
#define CONFIG_BOOTFILE ads5121/uImage
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
new file mode 100644
index 0000000..b38c813
--- /dev/null
+++ b/include/configs/atngw100.h
@@ -0,0 +1,182 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Configuration settings for the AVR32 Network Gateway
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7000 1
+#define CONFIG_ATNGW100 1
+
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
+ * and the PBA bus to run at 1/4 the PLL frequency.
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+#define CFG_CLKDIV_CPU 0
+#define CFG_CLKDIV_HSB 1
+#define CFG_CLKDIV_PBA 2
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#define CONFIG_USART1 1
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+/*
+ * BOOTP/DHCP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+#define CONFIG_DOS_PARTITION 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
+#define CONFIG_PIO2 1
+#define CFG_NR_PIOS 5
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE 0x24000000
+#define CFG_INTRAM_SIZE 0x8000
+
+#define CFG_SDRAM_BASE 0x10000000
+#define CFG_SDRAM_16BIT 1
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+#define CFG_MALLOC_END \
+ ({ \
+ DECLARE_GLOBAL_DATA_PTR; \
+ CFG_SDRAM_BASE + gd->sdram_size; \
+ })
+#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
+
+#define CFG_DMA_ALLOC_LEN (16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "Uboot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START \
+ ({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
+#define CFG_MEMTEST_END \
+ ({ \
+ DECLARE_GLOBAL_DATA_PTR; \
+ gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \
+ })
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index b43b228..cb51406 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -46,8 +46,8 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
-#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
@@ -67,7 +67,7 @@
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
/*-----------------------------------------------------------------------
* Serial Port
@@ -82,8 +82,8 @@
* set Linux BASE_BAUD to 403200.
*/
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
-#undef CONFIG_SERIAL_MULTI /* needed to be able to define
- CONFIG_SERIAL_SOFTWARE_FIFO */
+#define CONFIG_SERIAL_MULTI 1
+/* needed to be able to define CONFIG_SERIAL_SOFTWARE_FIFO */
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
#define CFG_BASE_BAUD 691200
@@ -101,12 +101,23 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
+ * Flash
+ *----------------------------------------------------------------------*/
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_IS_IN_FLASH
#undef CFG_ENV_IS_NOWHERE
#ifdef CFG_ENV_IS_IN_EEPROM
@@ -120,7 +131,7 @@
/* Put the environment in Flash */
#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 8*1024 /* 8 KB Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
@@ -158,7 +169,7 @@
/* Setup some board specific values for the default environment variables */
#define CONFIG_HOSTNAME hcu4
-#define CONFIG_IPADDR 172.25.1.42
+#define CONFIG_IPADDR 172.25.1.99
#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
#define CONFIG_OVERWRITE_ETHADDR_ONCE
#define CONFIG_SERVERIP 172.25.1.3
@@ -180,21 +191,17 @@
"rootpath=/home/diagnose/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/hcu4/uImage\0" \
"load=tftp 100000 hcu4/u-boot.bin\0" \
- "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \
- "cp.b 100000 FFFa0000 60000\0" \
+ "update=protect off FFFB0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \
+ "cp.b 100000 FFFB0000 50000\0" \
"upd=run load;run update\0" \
"vx=tftp ${loadaddr} hcu4_vx_rom;" \
- "setenv bootargs emac(0,0)hcu4_vx_rom e=${ipaddr} " \
- " h=${serverip} u=dpu pw=netstal8752 tn=hcu4 f=0x3008;" \
+ "vx=tftp ${loadaddr} hcu4/hcu4_vx_rom;" \
+ "setenv bootargs emac(0,0)c:hcu4/hcu4_vx_rom e=${ipaddr} " \
"bootvx ${loadaddr}\0" \
""
#define CONFIG_BOOTCOMMAND "run vx"
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -202,10 +209,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & desC */
/*
* BOOTP options
@@ -221,7 +228,6 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
@@ -241,15 +247,30 @@
#define CONFIG_SPD_EEPROM 1
#define SPD_EEPROM_ADDRESS 0x50
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_UART | \
+ CFG_POST_I2C | \
+ CFG_POST_CACHE | \
+ CFG_POST_ETHER | \
+ CFG_POST_SPR)
+
+#define CFG_POST_UART_TABLE {UART0_BASE}
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#undef CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
- #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
@@ -266,47 +287,40 @@
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*/
-/* Memory Bank 0 (Flash Bank 0) initialization */
-#define CFG_EBC_PB0AP 0x02005400
-#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
+#define CFG_EBC_CFG 0x98400000
-#define CFG_EBC_PB1AP 0x03041200
-#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x02005400
+#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
-#define CFG_EBC_PB2AP 0x02054500
-#define CFG_EBC_PB2CR 0x78018000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CFG_EBC_PB1AP 0x03041200
+#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */
-#define CFG_EBC_PB3AP 0x01840300
-#define CFG_EBC_PB3CR 0x7c0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CFG_EBC_PB2AP 0x02054500
+#define CFG_EBC_PB2CR 0x78018000 /* BAS=,BS=MB,BU=R/W,BW=bit */
-#define CFG_EBC_PB4AP 0x01800300
-#define CFG_EBC_PB4CR 0x7e0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CFG_EBC_PB3AP 0x01840300
+#define CFG_EBC_PB3CR 0x7c0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
-#define CFG_GPIO0_TCR 0x7ffe0000 /* GPIO value */
+#define CFG_EBC_PB4AP 0x01800300
+#define CFG_EBC_PB4CR 0x7e0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_GPIO0_OR 0xF27FFFFF /* GPIO value */
+#define CFG_GPIO0_TCR 0x7FFE0000 /* GPIO value */
+#define CFG_GPIO0_ODR 0x00E897FC /* GPIO value */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */
/* Init Memory Controller:
*
@@ -326,8 +340,8 @@
*
* Boot Flags
*/
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_HUSH_PARSER /* use "hush" command parser */
#ifdef CFG_HUSH_PARSER
@@ -338,4 +352,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 1214bc3..d66c47a 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -48,14 +48,16 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
-#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+#define CFG_TLB_FOR_BOOT_FLASH 3
#define CFG_BOOT_BASE_ADDR 0xfff00000
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_OCM_DATA_ADDR CFG_OCM_BASE
#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
@@ -78,14 +80,15 @@
#define CFG_INIT_RAM_END (4 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
#define CONFIG_BAUDRATE 9600
-#undef CONFIG_SERIAL_MULTI /* needed to be able to define
+#define CONFIG_SERIAL_MULTI 1
+/* needed to be able to define
CONFIG_SERIAL_SOFTWARE_FIFO, but
CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */
/* Size (bytes) of interrupt driven serial port buffer.
@@ -95,6 +98,7 @@
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#undef CONFIG_UART1_CONSOLE
+#undef CONFIG_CMD_HWFLOW
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -103,8 +107,8 @@
*----------------------------------------------------------------------*/
#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_EEPROM
#undef CFG_ENV_IS_NOWHERE
#ifdef CFG_ENV_IS_IN_EEPROM
@@ -117,22 +121,28 @@
#ifdef CFG_ENV_IS_IN_FLASH
/* Put the environment in Flash */
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 8*1024 /* 8 KB Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
#endif
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */
-#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
-#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */
-#define CONFIG_DDR_ECC 1 /* enable ECC */
+#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */
+#define CFG_DDR_CACHED_ADDR 0x50000000 /* setup 2nd TLB cached here */
+#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */
+#define CONFIG_DDR_ECC 1 /* enable ECC */
+
+/* Following two definitions must be kept in sync with config.h of vxWorks */
+#define USER_RESERVED_MEM ( 0) /* in kB */
+#define PM_RESERVED_MEM ( 64) /* in kB: pmLib reserved area size */
+#define CONFIG_PRAM ( USER_RESERVED_MEM + PM_RESERVED_MEM )
/*-----------------------------------------------------------------------
* I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
@@ -165,8 +175,8 @@
/* Setup some board specific values for the default environment variables */
#define CONFIG_HOSTNAME hcu5
-#define CONFIG_IPADDR 172.25.1.42
-#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
+#define CONFIG_IPADDR 172.25.1.99
+#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
#define CONFIG_OVERWRITE_ETHADDR_ONCE
#define CONFIG_SERVERIP 172.25.1.3
@@ -187,21 +197,27 @@
"bootfile=hcu5/uImage\0" \
"rootpath=/home/hcu/eldk/ppc_4xxFP\0" \
"load=tftp 100000 hcu5/u-boot.bin\0" \
- "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \
- "cp.b 100000 FFFa0000 60000\0" \
+ "update=protect off FFFb0000 FFFFFFFF;era FFFb0000 FFFFFFFF;" \
+ "cp.b 100000 FFFb0000 50000\0" \
"upd=run load;run update\0" \
- "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom;" \
- "setenv bootargs emac(0,0)hcu5_vx_rom e=${ipaddr} " \
- " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008;" \
- "bootvx ${loadaddr}\0" \
+ "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom; run vxboot\0" \
+ "vxusb=usb start; fatload usb 0 ${loadaddr} vxWorks.st; run vxboot\0" \
+ "vxargs=emac(0,0)c:hcu5/hcu5_vx_rom e=${ipaddr} h=${serverip}" \
+ " u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \
+ "vxboot=setenv bootargs $(vxargs); bootvx ${loadaddr}\0" \
+ "usbargs=setenv bootargs root=/dev/sda1 ro\0" \
+ "linux=usb start; ext2load usb 0 ${loadaddr} /boot/uImage;" \
+ "run usbargs addip addtty; bootm\0" \
+ "net_nfs_fdt=tftp 200000 ${bootfile};" \
+ "tftp ${fdt_addr} ${fdt_file};" \
+ "run nfsargs addip addtty;" \
+ "bootm 200000 - ${fdt_addr}\0" \
+ "fdt_file=hcu5/hcu5.dtb\0" \
+ "fdt_addr=400000\0" \
""
#define CONFIG_BOOTCOMMAND "run vx"
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -214,7 +230,7 @@
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & desc. */
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
@@ -246,7 +262,6 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
@@ -264,6 +279,21 @@
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_USB
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_UART | \
+ CFG_POST_I2C | \
+ CFG_POST_CACHE | \
+ CFG_POST_FPU | \
+ CFG_POST_ETHER | \
+ CFG_POST_SPR)
+#define CFG_POST_UART_TABLE {UART0_BASE}
+
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
#define CONFIG_SUPPORT_VFAT
/*-----------------------------------------------------------------------
@@ -276,7 +306,7 @@
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -291,17 +321,16 @@
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*-----------------------------------------------------------------------
* PCI stuff
*----------------------------------------------------------------------*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI 1 /* include pci support */
#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr map to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
#define CFG_PCI_TARGET_INIT
@@ -315,49 +344,49 @@
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
+ * Flash
+ *----------------------------------------------------------------------*/
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
#define CFG_FLASH CFG_FLASH_BASE
#define CFG_CS_1 0xC8000000 /* CAN */
#define CFG_CS_2 0xCC000000 /* CPLD and IMC-Bus Standard */
#define CFG_CPLD CFG_CS_2
-#define CFG_CS_3 0xCD000000 /* CPLD and IMC-Bus Fast */
+#define CFG_CS_3 0xCE000000 /* CPLD and IMC-Bus Fast */
-/*-----------------------------------------------------------------------
- * FLASH organization
- * Memory Bank 0 (BOOT-FLASH) initialization
- */
-#define CFG_BOOTFLASH_CS 0 /* Boot Flash chip connected to CSx */
+#define CFG_BOOTFLASH_CS 0 /* Boot Flash chip connected to CSx */
#define CFG_EBC_PB0AP 0x02005400
#define CFG_EBC_PB0CR 0xFFF18000 /* (CFG_FLASH | 0xda000) */
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
-
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/* Memory Bank 1 CAN-Chips initialization */
+/* Memory Bank 1 CAN-Chips initialization */
#define CFG_EBC_PB1AP 0x02054500
#define CFG_EBC_PB1CR 0xC8018000
-/* Memory Bank 2 CPLD/IMC-Bus standard initialization */
+/* Memory Bank 2 CPLD/IMC-Bus standard initialization */
#define CFG_EBC_PB2AP 0x01840300
#define CFG_EBC_PB2CR 0xCC0BA000
-/* Memory Bank 3 IMC-Bus fast mode initialization */
+/* Memory Bank 3 IMC-Bus fast mode initialization */
#define CFG_EBC_PB3AP 0x01800300
#define CFG_EBC_PB3CR 0xCE0BA000
-/* Memory Bank 4 (not used) initialization */
+/* Memory Bank 4 (not used) initialization */
#undef CFG_EBC_PB4AP
#undef CFG_EBC_PB4CR
-/* Memory Bank 5 (not used) initialization */
+/* Memory Bank 5 (not used) initialization */
#undef CFG_EBC_PB5AP
#undef CFG_EBC_PB5CR
@@ -369,8 +398,8 @@
*
* Boot Flags
*/
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_HUSH_PARSER /* use "hush" command parser */
#ifdef CFG_HUSH_PARSER
@@ -381,4 +410,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index f3e8601..a1d1533 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -476,7 +476,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index c5c2724..d8a2267 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -321,6 +321,12 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index 8f8e867..2f0b0a8 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -385,7 +385,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index c050a06..0a7a904 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -56,6 +56,7 @@
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index b71ba78..f9ede5f 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -50,6 +50,7 @@
#undef CONFIG_PCI /* pci ethernet support */
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 3baa32c..047e1cf 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -51,6 +51,7 @@
#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/* sysclk for MPC85xx
*/
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 9457bce..e09dd71 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -51,6 +51,7 @@
#undef CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/* sysclk for MPC85xx
*/
diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h
new file mode 100644
index 0000000..634ff02
--- /dev/null
+++ b/include/linux/mtd/fsl_upm.h
@@ -0,0 +1,39 @@
+/*
+ * FSL UPM NAND driver
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __LINUX_MTD_NAND_FSL_UPM
+#define __LINUX_MTD_NAND_FSL_UPM
+
+#include <linux/mtd/nand.h>
+
+struct fsl_upm {
+ const u32 *array;
+ void __iomem *mdr;
+ void __iomem *mxmr;
+ void __iomem *mar;
+ void __iomem *io_addr;
+};
+
+struct fsl_upm_nand {
+ struct fsl_upm upm;
+
+ int width;
+ int upm_cmd_offset;
+ int upm_addr_offset;
+ int wait_pattern;
+ int (*dev_ready)(void);
+ int chip_delay;
+};
+
+extern int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun);
+
+#endif
diff --git a/include/mpc512x.h b/include/mpc512x.h
index a06b5c6..d1c6fb2 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -185,7 +185,7 @@
/* SCFR1 System Clock Frequency Register 1
*/
-#define SCFR1_IPS_DIV 0x2
+#define SCFR1_IPS_DIV 0x4
#define SCFR1_IPS_DIV_MASK 0x03800000
#define SCFR1_IPS_DIV_SHIFT 23
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 7299ca0..df052e3 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -728,6 +728,7 @@
/* TSEC1 bits are for TSEC2 as well */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_0 0x00000000
#define SCCR_TSEC1CM_1 0x40000000
#define SCCR_TSEC1CM_2 0x80000000
#define SCCR_TSEC1CM_3 0xC0000000
@@ -852,6 +853,7 @@
*/
#define CSCONFIG_EN 0x80000000
#define CSCONFIG_AP 0x00800000
+#define CSCONFIG_ODT_WR_ACS 0x00010000
#define CSCONFIG_ROW_BIT 0x00000700
#define CSCONFIG_ROW_BIT_12 0x00000000
#define CSCONFIG_ROW_BIT_13 0x00000100
@@ -1480,6 +1482,7 @@
/* DDRCDR - DDR Control Driver Register
*/
+#define DDRCDR_DHC_EN 0x80000000
#define DDRCDR_EN 0x40000000
#define DDRCDR_PZ 0x3C000000
#define DDRCDR_PZ_MAXZ 0x00000000
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 809ee3b..d6423d4 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -264,6 +264,7 @@
#ifndef CFG_ENV_IS_NOWHERE
extern char * env_name_spec;
#endif
+ char *s;
cmd_tbl_t *cmdtp;
bd_t *bd;
@@ -336,11 +337,20 @@
/* initialize environment */
env_relocate();
+ bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+
devices_init();
jumptable_init();
console_init_r();
+ s = getenv("loadaddr");
+ if (s)
+ load_addr = simple_strtoul(s, NULL, 16);
+
#if defined(CONFIG_CMD_NET)
+ s = getenv("bootfile");
+ if (s)
+ copy_filename(BootFile, s, sizeof(BootFile));
#if defined(CONFIG_NET_MULTI)
puts("Net: ");
#endif
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 43f97c4..9159206 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -313,6 +313,16 @@
debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
#endif /* CONFIG_PRAM */
+ /* round down to next 4 kB limit */
+ addr &= ~(4096 - 1);
+ debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
+#ifdef CONFIG_LCD
+ /* reserve memory for LCD display (always full pages) */
+ addr = lcd_setmem (addr);
+ gd->fb_base = addr;
+#endif /* CONFIG_LCD */
+
/*
* reserve memory for U-Boot code, data & bss
* round down to next 4 kB limit
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 7b95246..45d1328 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -87,6 +87,9 @@
defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
+#if defined(CONFIG_HARD_SPI)
+#include <spi.h>
+#endif
#if defined(CONFIG_CMD_NAND)
void nand_init (void);
#endif
@@ -247,6 +250,16 @@
}
#endif
+#if defined(CONFIG_HARD_SPI)
+static int init_func_spi (void)
+{
+ puts ("SPI: ");
+ spi_init ();
+ puts ("ready\n");
+ return (0);
+}
+#endif
+
/***********************************************************************/
#if defined(CONFIG_WATCHDOG)
@@ -329,6 +342,9 @@
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
init_func_i2c,
#endif
+#if defined(CONFIG_HARD_SPI)
+ init_func_spi,
+#endif
#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
dtt_init,
#endif
@@ -835,6 +851,11 @@
#if defined(CONFIG_SC3)
sc3_read_eeprom();
#endif
+
+#ifdef CFG_ID_EEPROM
+ mac_read_from_eeprom();
+#endif
+
s = getenv ("ethaddr");
#if defined (CONFIG_MBX) || \
defined (CONFIG_RPXCLASSIC) || \
@@ -902,10 +923,6 @@
}
#endif
-#ifdef CFG_ID_EEPROM
- mac_read_from_eeprom();
-#endif
-
#if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
defined(CONFIG_TQM8272) || \
defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
diff --git a/net/eth.c b/net/eth.c
index 5d9e9c1..75175ec 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -60,7 +60,9 @@
extern int uec_initialize(int);
extern int bfin_EMAC_initialize(bd_t *);
extern int atstk1000_eth_initialize(bd_t *);
+extern int atngw100_eth_initialize(bd_t *);
extern int mcffec_initialize(bd_t*);
+extern int mcdmafec_initialize(bd_t*);
#ifdef CONFIG_API
extern void (*push_packet)(volatile void *, int);
@@ -217,6 +219,9 @@
#if defined(CONFIG_UEC_ETH3)
uec_initialize(2);
#endif
+#if defined(CONFIG_UEC_ETH4)
+ uec_initialize(3);
+#endif
#if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
fec_initialize(bis);
@@ -269,9 +274,15 @@
#if defined(CONFIG_ATSTK1000)
atstk1000_eth_initialize(bis);
#endif
+#if defined(CONFIG_ATNGW100)
+ atngw100_eth_initialize(bis);
+#endif
#if defined(CONFIG_MCFFEC)
mcffec_initialize(bis);
#endif
+#if defined(CONFIG_FSLDMAFEC)
+ mcdmafec_initialize(bis);
+#endif
if (!eth_devices) {
puts ("No ethernet found.\n");
@@ -522,6 +533,15 @@
void eth_try_another(int first_restart)
{
static struct eth_device *first_failed = NULL;
+ char *ethrotate;
+
+ /*
+ * Do not rotate between network interfaces when
+ * 'ethrotate' variable is set to 'no'.
+ */
+ if (((ethrotate = getenv ("ethrotate")) != NULL) &&
+ (strcmp(ethrotate, "no") == 0))
+ return;
if (!eth_current)
return;
diff --git a/post/cpu/ppc4xx/denali_ecc.c b/post/cpu/ppc4xx/denali_ecc.c
index 7723483..439f80d 100644
--- a/post/cpu/ppc4xx/denali_ecc.c
+++ b/post/cpu/ppc4xx/denali_ecc.c
@@ -49,7 +49,7 @@
DECLARE_GLOBAL_DATA_PTR;
-const static unsigned char syndrome_codes[] = {
+const static uint8_t syndrome_codes[] = {
0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB,
0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2,
@@ -65,174 +65,183 @@
#define ECC_STOP_ADDR 0x2000
#define ECC_PATTERN 0x01010101
#define ECC_PATTERN_CORR 0x11010101
-#define ECC_PATTERN_UNCORR 0xF1010101
+#define ECC_PATTERN_UNCORR 0x61010101
-static int test_ecc_error(void)
+inline static void disable_ecc(void)
{
- unsigned long value;
- unsigned long hdata, ldata, haddr, laddr;
- unsigned int bit;
+ uint32_t value;
- int ret = 0;
-
- mfsdram(DDR0_23, value);
+ sync(); /* Wait for any pending memory accesses to complete. */
+ mfsdram(DDR0_22, value);
+ mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
+ | DDR0_22_CTRL_RAW_ECC_DISABLE);
+}
- for (bit = 0; bit < sizeof(syndrome_codes); bit++)
- if (syndrome_codes[bit] == ((value >> 16) & 0xff))
- break;
+inline static void clear_and_enable_ecc(void)
+{
+ uint32_t value;
+ sync(); /* Wait for any pending memory accesses to complete. */
mfsdram(DDR0_00, value);
+ mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
+ mfsdram(DDR0_22, value);
+ mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
+ | DDR0_22_CTRL_RAW_ECC_ENABLE);
+}
- if (value & DDR0_00_INT_STATUS_BIT0) {
- debug("Bit0. A single access outside the defined PHYSICAL"
- " memory space detected\n");
+static uint32_t get_ecc_status(void)
+{
+ uint32_t int_status;
+#if defined(DEBUG)
+ uint8_t syndrome;
+ uint32_t hdata, ldata, haddr, laddr;
+ uint32_t value;
+#endif
+
+ mfsdram(DDR0_00, int_status);
+ int_status &= DDR0_00_INT_STATUS_MASK;
+
+#if defined(DEBUG)
+ if (int_status & (DDR0_00_INT_STATUS_BIT0 | DDR0_00_INT_STATUS_BIT1)) {
mfsdram(DDR0_32, laddr);
mfsdram(DDR0_33, haddr);
- debug(" addr = 0x%08x%08x\n", haddr, laddr);
- ret = 1;
- }
- if (value & DDR0_00_INT_STATUS_BIT1) {
- debug("Bit1. Multiple accesses outside the defined PHYSICAL"
- " memory space detected\n");
- ret = 2;
- }
- if (value & DDR0_00_INT_STATUS_BIT2) {
- debug("Bit2. Single correctable ECC event detected\n");
- mfsdram(DDR0_38, laddr);
- mfsdram(DDR0_39, haddr);
- mfsdram(DDR0_40, ldata);
- mfsdram(DDR0_41, hdata);
- debug(" 0x%08x - 0x%08x%08x, bit - %d\n",
- laddr, hdata, ldata, bit);
- ret = 3;
+ haddr &= 0x00000001;
+ if (int_status & DDR0_00_INT_STATUS_BIT1)
+ debug("Multiple accesses");
+ else
+ debug("A single access");
+
+ debug(" outside the defined physical memory space detected\n"
+ " addr = 0x%01x%08x\n", haddr, laddr);
}
- if (value & DDR0_00_INT_STATUS_BIT3) {
- debug("Bit3. Multiple correctable ECC events detected\n");
+ if (int_status & (DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT3)) {
+ unsigned int bit;
+
+ mfsdram(DDR0_23, value);
+ syndrome = (value >> 16) & 0xff;
+ for (bit = 0; bit < sizeof(syndrome_codes); bit++)
+ if (syndrome_codes[bit] == syndrome)
+ break;
+
mfsdram(DDR0_38, laddr);
mfsdram(DDR0_39, haddr);
+ haddr &= 0x00000001;
mfsdram(DDR0_40, ldata);
mfsdram(DDR0_41, hdata);
- debug(" 0x%08x - 0x%08x%08x, bit - %d\n",
- laddr, hdata, ldata, bit);
- ret = 4;
- }
- if (value & DDR0_00_INT_STATUS_BIT4) {
- debug("Bit4. Single uncorrectable ECC event detected\n");
- mfsdram(DDR0_34, laddr);
- mfsdram(DDR0_35, haddr);
- mfsdram(DDR0_36, ldata);
- mfsdram(DDR0_37, hdata);
- debug(" 0x%08x - 0x%08x%08x, bit - %d\n",
- laddr, hdata, ldata, bit);
- ret = 5;
+ if (int_status & DDR0_00_INT_STATUS_BIT3)
+ debug("Multiple correctable ECC events");
+ else
+ debug("Single correctable ECC event");
+
+ debug(" detected\n 0x%01x%08x - 0x%08x%08x, bit - %d\n",
+ haddr, laddr, hdata, ldata, bit);
}
- if (value & DDR0_00_INT_STATUS_BIT5) {
- debug("Bit5. Multiple uncorrectable ECC events detected\n");
+ if (int_status & (DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT5)) {
+ mfsdram(DDR0_23, value);
+ syndrome = (value >> 8) & 0xff;
mfsdram(DDR0_34, laddr);
mfsdram(DDR0_35, haddr);
+ haddr &= 0x00000001;
mfsdram(DDR0_36, ldata);
mfsdram(DDR0_37, hdata);
- debug(" 0x%08x - 0x%08x%08x, bit - %d\n",
- laddr, hdata, ldata, bit);
- ret = 6;
- }
- if (value & DDR0_00_INT_STATUS_BIT6) {
- debug("Bit6. DRAM initialization complete\n");
- ret = 7;
- }
+ if (int_status & DDR0_00_INT_STATUS_BIT5)
+ debug("Multiple uncorrectable ECC events");
+ else
+ debug("Single uncorrectable ECC event");
- /* error status cleared */
- mfsdram(DDR0_00, value);
- mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
+ debug(" detected\n 0x%01x%08x - 0x%08x%08x, "
+ "syndrome - 0x%02x\n",
+ haddr, laddr, hdata, ldata, syndrome);
+ }
+ if (int_status & DDR0_00_INT_STATUS_BIT6)
+ debug("DRAM initialization complete\n");
+#endif /* defined(DEBUG) */
- return ret;
+ return int_status;
}
-static int test_ecc(unsigned long ecc_addr)
+static int test_ecc(uint32_t ecc_addr)
{
- unsigned long value;
- volatile unsigned *const ecc_mem = (volatile unsigned *) ecc_addr;
- int pret;
+ uint32_t value;
+ volatile uint32_t *const ecc_mem = (volatile uint32_t *)ecc_addr;
int ret = 0;
- sync();
- eieio();
WATCHDOG_RESET();
- debug("Entering test_ecc(0x%08lX)\n", ecc_addr);
+ debug("Entering test_ecc(0x%08x)\n", ecc_addr);
+ /* Set up correct ECC in memory */
+ disable_ecc();
+ clear_and_enable_ecc();
out_be32(ecc_mem, ECC_PATTERN);
out_be32(ecc_mem + 1, ECC_PATTERN);
- in_be32(ecc_mem);
- pret = test_ecc_error();
- if (pret != 0) {
- debug("pret: expected 0, got %d\n", pret);
+
+ /* Verify no ECC error reading back */
+ value = in_be32(ecc_mem);
+ disable_ecc();
+ if (ECC_PATTERN != value) {
+ debug("Data read error (no-error case): "
+ "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
ret = 1;
}
- /* test for correctable error */
- /* disconnect from ecc storage */
- mfsdram(DDR0_22, value);
- mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
- | DDR0_22_CTRL_RAW_ECC_DISABLE);
+ value = get_ecc_status();
+ if (0x00000000 != value) {
+ /* Expected no ECC status reported */
+ debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
+ 0x00000000, value);
+ ret = 1;
+ }
- /* creating (correctable) single-bit error */
+ /* Test for correctable error by creating a one-bit error */
out_be32(ecc_mem, ECC_PATTERN_CORR);
-
- /* enable ecc */
- mfsdram(DDR0_22, value);
- mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
- | DDR0_22_CTRL_RAW_ECC_ENABLE);
- sync();
- eieio();
-
- in_be32(ecc_mem);
- pret = test_ecc_error();
- /* if read data ok, 1 correctable error must be fixed */
- if (pret != 3) {
- debug("pret: expected 3, got %d\n", pret);
+ clear_and_enable_ecc();
+ value = in_be32(ecc_mem);
+ disable_ecc();
+ /* Test that the corrected data was read */
+ if (ECC_PATTERN != value) {
+ debug("Data read error (correctable-error case): "
+ "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
ret = 1;
}
- /* test for uncorrectable error */
- /* disconnect from ecc storage */
- mfsdram(DDR0_22, value);
- mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
- | DDR0_22_CTRL_RAW_NO_ECC_RAM);
+ value = get_ecc_status();
+ if ((DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT7) != value) {
+ /* Expected a single correctable error reported */
+ debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
+ DDR0_00_INT_STATUS_BIT2, value);
+ ret = 1;
+ }
- /* creating (uncorrectable) multiple-bit error */
+ /* Test for uncorrectable error by creating a two-bit error */
out_be32(ecc_mem, ECC_PATTERN_UNCORR);
-
- /* enable ecc */
- mfsdram(DDR0_22, value);
- mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
- | DDR0_22_CTRL_RAW_ECC_ENABLE);
- sync();
- eieio();
-
- in_be32(ecc_mem);
- pret = test_ecc_error();
- /* info about uncorrectable error must appear */
- if (pret != 5) {
- debug("pret: expected 5, got %d\n", pret);
+ clear_and_enable_ecc();
+ value = in_be32(ecc_mem);
+ disable_ecc();
+ /* Test that the corrected data was read */
+ if (ECC_PATTERN_UNCORR != value) {
+ debug("Data read error (uncorrectable-error case): "
+ "expected 0x%08x, read 0x%08x\n", ECC_PATTERN_UNCORR,
+ value);
ret = 1;
}
- /* remove error from SDRAM */
+ value = get_ecc_status();
+ if ((DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT7) != value) {
+ /* Expected a single uncorrectable error reported */
+ debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
+ DDR0_00_INT_STATUS_BIT4, value);
+ ret = 1;
+ }
+
+ /* Remove error from SDRAM and enable ECC. */
out_be32(ecc_mem, ECC_PATTERN);
- /* clear error caused by read-modify-write */
- mfsdram(DDR0_00, value);
- mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
+ clear_and_enable_ecc();
- sync();
- eieio();
return ret;
}
-int ecc_post_test (int flags)
+int ecc_post_test(int flags)
{
int ret = 0;
- unsigned long value;
- unsigned long iaddr;
-
- sync();
- eieio();
+ uint32_t value;
+ uint32_t iaddr;
mfsdram(DDR0_22, value);
if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) {
@@ -240,28 +249,23 @@
return 0;
}
- /* mask all int */
+ /* Mask all interrupts. */
mfsdram(DDR0_01, value);
mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK)
| DDR0_01_INT_MASK_ALL_OFF);
- /* clear error status */
- mfsdram(DDR0_00, value);
- mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
-
for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) {
ret = test_ecc(iaddr);
if (ret)
break;
}
/*
- * Clear possible errors resulting from ECC testing.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
+ * Clear possible errors resulting from ECC testing. (If not done, we
+ * we could get an interrupt later on when exceptions are enabled.)
*/
set_mcsr(get_mcsr());
+ debug("ecc_post_test() returning %d\n", ret);
return ret;
-
}
#endif /* CONFIG_POST & CFG_POST_ECC */
#endif /* defined(CONFIG_POST) && ... */
diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c
index 3e74634..c12e378 100644
--- a/post/cpu/ppc4xx/spr.c
+++ b/post/cpu/ppc4xx/spr.c
@@ -80,7 +80,9 @@
{0x107, "SPRG7", 0x00000000, 0x00000000},
{0x10c, "TBL", 0x00000000, 0x00000000},
{0x10d, "TBU", 0x00000000, 0x00000000},
+#ifdef CONFIG_440
{0x11e, "PIR", 0x0000000f, 0x00000000},
+#endif
{0x130, "DBSR", 0x00000000, 0x00000000},
{0x134, "DBCR0", 0x00000000, 0x00000000},
{0x135, "DBCR1", 0x00000000, 0x00000000},
@@ -95,6 +97,7 @@
{0x13f, "DVC2", 0x00000000, 0x00000000},
{0x150, "TSR", 0x00000000, 0x00000000},
{0x154, "TCR", 0x00000000, 0x00000000},
+#ifdef CONFIG_440
{0x190, "IVOR0", 0x0000fff0, 0x00000100},
{0x191, "IVOR1", 0x0000fff0, 0x00000200},
{0x192, "IVOR2", 0x0000fff0, 0x00000300},
@@ -111,6 +114,7 @@
{0x19d, "IVOR13", 0x0000fff0, 0x00001300},
{0x19e, "IVOR14", 0x0000fff0, 0x00001400},
{0x19f, "IVOR15", 0x0000fff0, 0x00002000},
+#endif
{0x23a, "MCSRR0", 0x00000000, 0x00000000},
{0x23b, "MCSRR1", 0x00000000, 0x00000000},
{0x23c, "MCSR", 0x00000000, 0x00000000},
@@ -131,8 +135,10 @@
{0x395, "DTV1", 0x00000000, 0x00000000},
{0x396, "DTV2", 0x00000000, 0x00000000},
{0x397, "DTV3", 0x00000000, 0x00000000},
+#ifdef CONFIG_440
{0x398, "DVLIM", 0x0fc1f83f, 0x0001f800},
{0x399, "IVLIM", 0x0fc1f83f, 0x0001f800},
+#endif
{0x39b, "RSTCFG", 0x00000000, 0x00000000},
{0x39c, "DCDBTRL", 0x00000000, 0x00000000},
{0x39d, "DCDBTRH", 0x00000000, 0x00000000},