| CONFIG_ARM=y |
| CONFIG_SKIP_LOWLEVEL_INIT=y |
| CONFIG_SYS_DCACHE_OFF=y |
| CONFIG_ARCH_CPU_INIT=y |
| CONFIG_SYS_THUMB_BUILD=y |
| CONFIG_ARCH_KIRKWOOD=y |
| CONFIG_SUPPORT_PASSING_ATAGS=y |
| CONFIG_CMDLINE_TAG=y |
| CONFIG_INITRD_TAG=y |
| CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg" |
| CONFIG_TEXT_BASE=0x600000 |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_TARGET_GOFLEXHOME=y |
| CONFIG_ENV_SIZE=0x20000 |
| CONFIG_ENV_OFFSET=0xC0000 |
| CONFIG_DEFAULT_DEVICE_TREE="kirkwood-goflexnet" |
| CONFIG_IDENT_STRING="\nSeagate GoFlex Home" |
| CONFIG_SYS_LOAD_ADDR=0x800000 |
| CONFIG_BOOTDELAY=3 |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:root; ubifsload 0x800000 ${kernel}; bootm 0x800000" |
| CONFIG_USE_PREBOOT=y |
| CONFIG_SYS_PBSIZE=1053 |
| CONFIG_CONSOLE_MUX=y |
| # CONFIG_DISPLAY_BOARDINFO is not set |
| CONFIG_SYS_PROMPT="GoFlexHome> " |
| CONFIG_SYS_MAXARGS=32 |
| CONFIG_CMD_NAND=y |
| CONFIG_CMD_SATA=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_DHCP=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_EXT4=y |
| CONFIG_CMD_FAT=y |
| CONFIG_CMD_JFFS2=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)" |
| CONFIG_CMD_UBI=y |
| CONFIG_ISO_PARTITION=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_NETCONSOLE=y |
| CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y |
| CONFIG_SATA_MV=y |
| CONFIG_SYS_SATA_MAX_DEVICE=1 |
| CONFIG_LBA48=y |
| # CONFIG_MMC is not set |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_PHY_MARVELL=y |
| CONFIG_MVGBE=y |
| CONFIG_MII=y |
| CONFIG_DM_RTC=y |
| CONFIG_RTC_MV=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_STORAGE=y |