qe: move drivers/qe/qe.h to include/fsl_qe.h
As the QE firmware struct is shared with Fman, move the header file
out of drivers/qe/.
Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index 40fbf19..e2a8ed3 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -10,7 +10,7 @@
#include <asm/errno.h>
#include "fm.h"
-#include "../../qe/qe.h" /* For struct qe_firmware */
+#include <fsl_qe.h> /* For struct qe_firmware */
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
#include <nand.h>
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index dfae4bf..4f48f98 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -10,7 +10,7 @@
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
-#include "qe.h"
+#include <fsl_qe.h>
#ifdef CONFIG_QE
DECLARE_GLOBAL_DATA_PTR;
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 08620b2..8f00817 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -12,7 +12,7 @@
#include "asm/errno.h"
#include "asm/io.h"
#include "linux/immap_qe.h"
-#include "qe.h"
+#include <fsl_qe.h>
#ifdef CONFIG_LS102XA
#include <asm/arch/immap_ls102xa.h>
#endif
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
deleted file mode 100644
index 77b18e9..0000000
--- a/drivers/qe/qe.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __QE_H__
-#define __QE_H__
-
-#include "common.h"
-#ifdef CONFIG_U_QE
-#include <linux/immap_qe.h>
-#endif
-
-#define QE_NUM_OF_BRGS 16
-#define UCC_MAX_NUM 8
-
-#define QE_DATAONLY_BASE 0
-#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE)
-
-/* QE threads SNUM
-*/
-typedef enum qe_snum_state {
- QE_SNUM_STATE_USED, /* used */
- QE_SNUM_STATE_FREE /* free */
-} qe_snum_state_e;
-
-typedef struct qe_snum {
- u8 num; /* snum */
- qe_snum_state_e state; /* state */
-} qe_snum_t;
-
-/* QE RISC allocation
-*/
-#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
-#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
-#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
-#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
-#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \
- QE_RISC_ALLOCATION_RISC2)
-#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \
- QE_RISC_ALLOCATION_RISC2 | \
- QE_RISC_ALLOCATION_RISC3 | \
- QE_RISC_ALLOCATION_RISC4)
-
-/* QE CECR commands for UCC fast.
-*/
-#define QE_CR_FLG 0x00010000
-#define QE_RESET 0x80000000
-#define QE_INIT_TX_RX 0x00000000
-#define QE_INIT_RX 0x00000001
-#define QE_INIT_TX 0x00000002
-#define QE_ENTER_HUNT_MODE 0x00000003
-#define QE_STOP_TX 0x00000004
-#define QE_GRACEFUL_STOP_TX 0x00000005
-#define QE_RESTART_TX 0x00000006
-#define QE_SWITCH_COMMAND 0x00000007
-#define QE_SET_GROUP_ADDRESS 0x00000008
-#define QE_INSERT_CELL 0x00000009
-#define QE_ATM_TRANSMIT 0x0000000a
-#define QE_CELL_POOL_GET 0x0000000b
-#define QE_CELL_POOL_PUT 0x0000000c
-#define QE_IMA_HOST_CMD 0x0000000d
-#define QE_ATM_MULTI_THREAD_INIT 0x00000011
-#define QE_ASSIGN_PAGE 0x00000012
-#define QE_START_FLOW_CONTROL 0x00000014
-#define QE_STOP_FLOW_CONTROL 0x00000015
-#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
-#define QE_GRACEFUL_STOP_RX 0x0000001a
-#define QE_RESTART_RX 0x0000001b
-
-/* QE CECR Sub Block Code - sub block code of QE command.
-*/
-#define QE_CR_SUBBLOCK_INVALID 0x00000000
-#define QE_CR_SUBBLOCK_USB 0x03200000
-#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
-#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
-#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
-#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
-#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
-#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
-#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
-#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
-#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
-#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
-#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
-#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
-#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
-#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
-#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
-#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
-#define QE_CR_SUBBLOCK_MCC1 0x03800000
-#define QE_CR_SUBBLOCK_MCC2 0x03a00000
-#define QE_CR_SUBBLOCK_MCC3 0x03000000
-#define QE_CR_SUBBLOCK_IDMA1 0x02800000
-#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
-#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
-#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
-#define QE_CR_SUBBLOCK_HPAC 0x01e00000
-#define QE_CR_SUBBLOCK_SPI1 0x01400000
-#define QE_CR_SUBBLOCK_SPI2 0x01600000
-#define QE_CR_SUBBLOCK_RAND 0x01c00000
-#define QE_CR_SUBBLOCK_TIMER 0x01e00000
-#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
-
-/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
-*/
-#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
-#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
-#define QE_CR_PROTOCOL_ATM_POS 0x0A
-#define QE_CR_PROTOCOL_ETHERNET 0x0C
-#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
-#define QE_CR_PROTOCOL_SHIFT 6
-
-/* QE ASSIGN PAGE command
-*/
-#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17
-
-/* Communication Direction.
-*/
-typedef enum comm_dir {
- COMM_DIR_NONE = 0,
- COMM_DIR_RX = 1,
- COMM_DIR_TX = 2,
- COMM_DIR_RX_AND_TX = 3
-} comm_dir_e;
-
-/* Clocks and BRG's
-*/
-typedef enum qe_clock {
- QE_CLK_NONE = 0,
- QE_BRG1, /* Baud Rate Generator 1 */
- QE_BRG2, /* Baud Rate Generator 2 */
- QE_BRG3, /* Baud Rate Generator 3 */
- QE_BRG4, /* Baud Rate Generator 4 */
- QE_BRG5, /* Baud Rate Generator 5 */
- QE_BRG6, /* Baud Rate Generator 6 */
- QE_BRG7, /* Baud Rate Generator 7 */
- QE_BRG8, /* Baud Rate Generator 8 */
- QE_BRG9, /* Baud Rate Generator 9 */
- QE_BRG10, /* Baud Rate Generator 10 */
- QE_BRG11, /* Baud Rate Generator 11 */
- QE_BRG12, /* Baud Rate Generator 12 */
- QE_BRG13, /* Baud Rate Generator 13 */
- QE_BRG14, /* Baud Rate Generator 14 */
- QE_BRG15, /* Baud Rate Generator 15 */
- QE_BRG16, /* Baud Rate Generator 16 */
- QE_CLK1, /* Clock 1 */
- QE_CLK2, /* Clock 2 */
- QE_CLK3, /* Clock 3 */
- QE_CLK4, /* Clock 4 */
- QE_CLK5, /* Clock 5 */
- QE_CLK6, /* Clock 6 */
- QE_CLK7, /* Clock 7 */
- QE_CLK8, /* Clock 8 */
- QE_CLK9, /* Clock 9 */
- QE_CLK10, /* Clock 10 */
- QE_CLK11, /* Clock 11 */
- QE_CLK12, /* Clock 12 */
- QE_CLK13, /* Clock 13 */
- QE_CLK14, /* Clock 14 */
- QE_CLK15, /* Clock 15 */
- QE_CLK16, /* Clock 16 */
- QE_CLK17, /* Clock 17 */
- QE_CLK18, /* Clock 18 */
- QE_CLK19, /* Clock 19 */
- QE_CLK20, /* Clock 20 */
- QE_CLK21, /* Clock 21 */
- QE_CLK22, /* Clock 22 */
- QE_CLK23, /* Clock 23 */
- QE_CLK24, /* Clock 24 */
- QE_CLK_DUMMY
-} qe_clock_e;
-
-/* QE CMXGCR register
-*/
-#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000
-#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
-
-/* QE CMXUCR registers
- */
-#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
-
-/* QE BRG configuration register
-*/
-#define QE_BRGC_ENABLE 0x00010000
-#define QE_BRGC_DIVISOR_SHIFT 1
-#define QE_BRGC_DIVISOR_MAX 0xFFF
-#define QE_BRGC_DIV16 1
-
-/* QE SDMA registers
-*/
-#define QE_SDSR_BER1 0x02000000
-#define QE_SDSR_BER2 0x01000000
-
-#define QE_SDMR_GLB_1_MSK 0x80000000
-#define QE_SDMR_ADR_SEL 0x20000000
-#define QE_SDMR_BER1_MSK 0x02000000
-#define QE_SDMR_BER2_MSK 0x01000000
-#define QE_SDMR_EB1_MSK 0x00800000
-#define QE_SDMR_ER1_MSK 0x00080000
-#define QE_SDMR_ER2_MSK 0x00040000
-#define QE_SDMR_CEN_MASK 0x0000E000
-#define QE_SDMR_SBER_1 0x00000200
-#define QE_SDMR_SBER_2 0x00000200
-#define QE_SDMR_EB1_PR_MASK 0x000000C0
-#define QE_SDMR_ER1_PR 0x00000008
-
-#define QE_SDMR_CEN_SHIFT 13
-#define QE_SDMR_EB1_PR_SHIFT 6
-
-#define QE_SDTM_MSNUM_SHIFT 24
-
-#define QE_SDEBCR_BA_MASK 0x01FFFFFF
-
-/* Communication Processor */
-#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
-#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
-#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
-
-/* I-RAM */
-#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
-#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
-#define QE_IRAM_READY 0x80000000
-
-/* Structure that defines QE firmware binary files.
- *
- * See doc/README.qe_firmware for a description of these fields.
- */
-struct qe_firmware {
- struct qe_header {
- u32 length; /* Length of the entire structure, in bytes */
- u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
- u8 version; /* Version of this layout. First ver is '1' */
- } header;
- u8 id[62]; /* Null-terminated identifier string */
- u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
- u8 count; /* Number of microcode[] structures */
- struct {
- u16 model; /* The SOC model */
- u8 major; /* The SOC revision major */
- u8 minor; /* The SOC revision minor */
- } __attribute__ ((packed)) soc;
- u8 padding[4]; /* Reserved, for alignment */
- u64 extended_modes; /* Extended modes */
- u32 vtraps[8]; /* Virtual trap addresses */
- u8 reserved[4]; /* Reserved, for future expansion */
- struct qe_microcode {
- u8 id[32]; /* Null-terminated identifier */
- u32 traps[16]; /* Trap addresses, 0 == ignore */
- u32 eccr; /* The value for the ECCR register */
- u32 iram_offset;/* Offset into I-RAM for the code */
- u32 count; /* Number of 32-bit words of the code */
- u32 code_offset;/* Offset of the actual microcode */
- u8 major; /* The microcode version major */
- u8 minor; /* The microcode version minor */
- u8 revision; /* The microcode version revision */
- u8 padding; /* Reserved, for alignment */
- u8 reserved[4]; /* Reserved, for future expansion */
- } __attribute__ ((packed)) microcode[1];
- /* All microcode binaries should be located here */
- /* CRC32 should be located here, after the microcode binaries */
-} __attribute__ ((packed));
-
-struct qe_firmware_info {
- char id[64]; /* Firmware name */
- u32 vtraps[8]; /* Virtual trap addresses */
- u64 extended_modes; /* Extended modes */
-};
-
-void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
-void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
-uint qe_muram_alloc(uint size, uint align);
-void *qe_muram_addr(uint offset);
-int qe_get_snum(void);
-void qe_put_snum(u8 snum);
-void qe_init(uint qe_base);
-void qe_reset(void);
-void qe_assign_page(uint snum, uint para_ram_base);
-int qe_set_brg(uint brg, uint rate);
-int qe_set_mii_clk_src(int ucc_num);
-int qe_upload_firmware(const struct qe_firmware *firmware);
-struct qe_firmware_info *qe_get_firmware_info(void);
-void ft_qe_setup(void *blob);
-void qe_init(uint qe_base);
-void qe_reset(void);
-
-#ifdef CONFIG_U_QE
-void u_qe_init(void);
-int u_qe_upload_firmware(const struct qe_firmware *firmware);
-void u_qe_resume(void);
-int u_qe_firmware_resume(const struct qe_firmware *firmware,
- qe_map_t *qe_immrr);
-#endif
-
-#endif /* __QE_H__ */
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
index 85386bf..e011886 100644
--- a/drivers/qe/uccf.c
+++ b/drivers/qe/uccf.c
@@ -12,8 +12,8 @@
#include "asm/errno.h"
#include "asm/io.h"
#include "linux/immap_qe.h"
-#include "qe.h"
#include "uccf.h"
+#include <fsl_qe.h>
void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
{
diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h
index 55941e4..aa817e7 100644
--- a/drivers/qe/uccf.h
+++ b/drivers/qe/uccf.h
@@ -11,8 +11,8 @@
#define __UCCF_H__
#include "common.h"
-#include "qe.h"
#include "linux/immap_qe.h"
+#include <fsl_qe.h>
/* Fast or Giga ethernet
*/
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index e0ab04a..40cccc2 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -12,11 +12,11 @@
#include "asm/errno.h"
#include "asm/io.h"
#include "linux/immap_qe.h"
-#include "qe.h"
#include "uccf.h"
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <fsl_qe.h>
#include <phy.h>
/* Default UTBIPAR SMI address */
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 6b559f7..22e248f 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -10,8 +10,8 @@
#ifndef __UEC_H__
#define __UEC_H__
-#include "qe.h"
#include "uccf.h"
+#include <fsl_qe.h>
#include <phy.h>
#define MAX_TX_THREADS 8
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index e701787..272874d 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -16,11 +16,11 @@
#include "asm/errno.h"
#include "linux/immap_qe.h"
#include "asm/io.h"
-#include "qe.h"
#include "uccf.h"
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <fsl_qe.h>
#include <phy.h>
#define ugphy_printk(format, arg...) \