* Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs.
* Patch by Marc Singer, 28 May 2003:
Added port I/O commands.
* Patch by Matthew McClintock, 28 May 2003
- cpu/mpc824x/start.S: fix relocation code when booting from RAM
- minor patches for utx8245
* Patch by Daniel Engström, 28 May 2003:
x86 update
* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
add nand flash support to SXNI855T configuration
fix/extend nand flash support:
- fix 'nand erase' command so does not erase bad blocks
- fix 'nand write' command so does not write to bad blocks
- fix nand_probe() so handles no flash detected properly
- add doc/README.nand
- add .jffs2 and .oob options to nand read/write
- add 'nand bad' command to list bad blocks
- add 'clean' option to 'nand erase' to write JFFS2 clean markers
- make NAND read/write faster
* Patch by Rune Torgersen, 23 May 2003:
Update for MPC8266ADS board
diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile
index 1482398..7067a06 100644
--- a/cpu/i386/Makefile
+++ b/cpu/i386/Makefile
@@ -26,17 +26,18 @@
LIB = lib$(CPU).a
START = start.o start16.o reset.o
-OBJS = serial.o interrupts.o cpu.o timer.o
-
+COBJS = serial.o interrupts.o cpu.o timer.o sc520.o
+AOBJS = sc520_asm.o
+
all: .depend $(START) $(LIB)
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(COBJS) $(AOBJS)
+ $(AR) crv $@ $(COBJS) $(AOBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+.depend: Makefile $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S) > $@
sinclude .depend
diff --git a/cpu/i386/config.mk b/cpu/i386/config.mk
index 70caeb2..c7cf151 100644
--- a/cpu/i386/config.mk
+++ b/cpu/i386/config.mk
@@ -21,6 +21,6 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += # -pipe -mpreferred-stack-boundary=2 -fno-builtin -nostdinc -nostdlib
+PLATFORM_RELFLAGS +=
-PLATFORM_CPPFLAGS += -march=i386
+PLATFORM_CPPFLAGS += -march=i386 -Werror
diff --git a/cpu/i386/cpu.c b/cpu/i386/cpu.c
index 669823f..3c67c12 100644
--- a/cpu/i386/cpu.c
+++ b/cpu/i386/cpu.c
@@ -38,6 +38,13 @@
int cpu_init(void)
{
+ /* initialize FPU, reset EM, set MP and NE */
+ asm ("fninit\n" \
+ "movl %cr0, %eax\n" \
+ "andl $~0x4, %eax\n" \
+ "orl $0x22, %eax\n" \
+ "movl %eax, %cr0\n" );
+
return 0;
}
diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c
index 81d6881..614d408 100644
--- a/cpu/i386/interrupts.c
+++ b/cpu/i386/interrupts.c
@@ -29,22 +29,6 @@
#include <asm/ibmpc.h>
-#if 0
-/* done */
-int interrupt_init (void);
-void irq_install_handler(int, interrupt_handler_t *, void *);
-void irq_free_handler (int);
-void enable_interrupts (void);
-int disable_interrupts (void);
-
-/* todo */
-void timer_interrupt (struct pt_regs *);
-void external_interrupt (struct pt_regs *);
-void reset_timer (void);
-ulong get_timer (ulong base);
-void set_timer (ulong t);
-
-#endif
struct idt_entry {
u16 base_low;
@@ -76,43 +60,30 @@
static irq_desc_t irq_table[MAX_IRQ];
-/* syscall stuff, very untested
- * the current approach which includes copying
- * part of the stack will work badly for
- * varargs functions.
- * if we were to store the top three words on the
- * stack (eip, ss, eflags) somwhere and add 14 to
- * %esp ....
- */
+
asm(".globl syscall_entry\n" \
"syscall_entry:\n" \
- "movl 12(%esp), %eax\n" \
- "movl %esp, %ebx\n" \
- "addl $16, %ebx\n" \
- "pushl %ebx\n" \
- "pushl %eax\n" \
- "call do_syscall\n" \
- "addl $8, %esp\n" \
- "iret\n");
+ "popl %ebx\n" /* throw away the return address, flags */ \
+ "popl %ebx\n" /* and segment that the INT instruction pushed */ \
+ "popl %ebx\n" /* on to the stack */ \
+ "movl %eax, %ecx\n" /* load the syscall nr argument*/ \
+ "movl syscall_tbl, %eax\n" /* load start of syscall table */ \
+ "cmpl $(11-1), %ecx\n" /* FixMe: find a way to use NR_SYSCALLS macro here */ \
+ "ja bad_syscall\n" \
+ "movl (%eax, %ecx, 4), %eax\n" /* load the handler of the syscall*/ \
+ "test %eax, %eax\n" /* test for null */ \
+ "je bad_syscall\n" \
+ "popl %ecx\n" \
+ "popl %ebx\n" \
+ "sti \n" \
+ "jmp *%eax\n" \
+"bad_syscall: movl $0xffffffff, %eax\n" \
+ "popl %ecx\n" \
+ "popl %ebx\n" \
+ "ret");
void __attribute__ ((regparm(0))) syscall_entry(void);
-int __attribute__ ((regparm(0))) do_syscall(u32 nr, u32 *stack)
-{
- if (nr<NR_SYSCALLS) {
- /* We copy 8 args of the syscall,
- * this will be a problem with the
- * printf syscall .... */
- int (*fp)(u32, u32, u32, u32,
- u32, u32, u32, u32);
- fp = syscall_tbl[nr];
- return fp(stack[0], stack[1], stack[2], stack[3],
- stack[4], stack[5], stack[6], stack[7]);
- }
-
- return -1;
-}
-
asm ("irq_return:\n"
" addl $4, %esp\n"
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
new file mode 100644
index 0000000..500089a
--- /dev/null
+++ b/cpu/i386/sc520.c
@@ -0,0 +1,502 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* stuff specific for the sc520,
+ * but idependent of implementation */
+
+#include <config.h>
+
+#ifdef CONFIG_SC520
+
+#include <common.h>
+#include <config.h>
+#include <pci.h>
+#include <ssi.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/ic/sc520.h>
+
+/*
+ * utility functions for boards based on the AMD sc520
+ *
+ * void write_mmcr_byte(u16 mmcr, u8 data)
+ * void write_mmcr_word(u16 mmcr, u16 data)
+ * void write_mmcr_long(u16 mmcr, u32 data)
+ *
+ * u8 read_mmcr_byte(u16 mmcr)
+ * u16 read_mmcr_word(u16 mmcr)
+ * u32 read_mmcr_long(u16 mmcr)
+ *
+ * void init_sc520(void)
+ * unsigned long init_sc520_dram(void)
+ * void pci_sc520_init(struct pci_controller *hose)
+ *
+ * void reset_timer(void)
+ * ulong get_timer(ulong base)
+ * void set_timer(ulong t)
+ * void udelay(unsigned long usec)
+ *
+ */
+
+static u32 mmcr_base= 0xfffef000;
+
+void write_mmcr_byte(u16 mmcr, u8 data)
+{
+ writeb(data, mmcr+mmcr_base);
+}
+
+void write_mmcr_word(u16 mmcr, u16 data)
+{
+ writew(data, mmcr+mmcr_base);
+}
+
+void write_mmcr_long(u16 mmcr, u32 data)
+{
+ writel(data, mmcr+mmcr_base);
+}
+
+u8 read_mmcr_byte(u16 mmcr)
+{
+ return readb(mmcr+mmcr_base);
+}
+
+u16 read_mmcr_word(u16 mmcr)
+{
+ return readw(mmcr+mmcr_base);
+}
+
+u32 read_mmcr_long(u16 mmcr)
+{
+ return readl(mmcr+mmcr_base);
+}
+
+
+void init_sc520(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* Set the UARTxCTL register at it's slower,
+ * baud clock giving us a 1.8432 MHz reference
+ */
+ write_mmcr_byte(SC520_UART1CTL, 7);
+ write_mmcr_byte(SC520_UART2CTL, 7);
+
+ /* first set the timer pin mapping */
+ write_mmcr_byte(SC520_CLKSEL, 0x72); /* no clock frequency selected, use 1.1892MHz */
+
+ /* enable PCI bus arbitrer */
+ write_mmcr_byte(SC520_SYSARBCTL,0x02); /* enable concurrent mode */
+
+ write_mmcr_word(SC520_SYSARBMENB,0x1f); /* enable external grants */
+ write_mmcr_word(SC520_HBCTL,0x04); /* enable posted-writes */
+
+
+ if (CFG_SC520_HIGH_SPEED) {
+ write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz and write back */
+ gd->cpu_clk = 133000000;
+ printf("## CPU Speed set to 133MHz\n");
+ } else {
+ write_mmcr_byte(SC520_CPUCTL, 1); /* set CPU to 100 MHz and write back cache */
+ printf("## CPU Speed set to 100MHz\n");
+ gd->cpu_clk = 100000000;
+ }
+
+
+ /* wait at least one millisecond */
+ asm("movl $0x2000,%%ecx\n"
+ "wait_loop: pushl %%ecx\n"
+ "popl %%ecx\n"
+ "loop wait_loop\n": : : "ecx");
+
+ /* turn on the SDRAM write buffer */
+ write_mmcr_byte(SC520_DBCTL, 0x11);
+
+ /* turn on the cache and disable write through */
+ asm("movl %%cr0, %%eax\n"
+ "andl $0x9fffffff, %%eax\n"
+ "movl %%eax, %%cr0\n" : : : "eax");
+}
+
+unsigned long init_sc520_dram(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ bd_t *bd = gd->bd;
+
+ u32 dram_present=0;
+ u32 dram_ctrl;
+
+ int val;
+
+ int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
+ int refresh_rate = CFG_SDRAM_REFRESH_RATE;
+ int ras_cas_delay = CFG_SDRAM_RAS_CAS_DELAY;
+
+ /* set SDRAM speed here */
+
+ refresh_rate/=78;
+ if (refresh_rate<=1) {
+ val = 0; /* 7.8us */
+ } else if (refresh_rate==2) {
+ val = 1; /* 15.6us */
+ } else if (refresh_rate==3 || refresh_rate==4) {
+ val = 2; /* 31.2us */
+ } else {
+ val = 3; /* 62.4us */
+ }
+ write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4));
+
+ val = read_mmcr_byte(SC520_DRCTMCTL);
+ val &= 0xf0;
+
+ if (cas_precharge_delay==3) {
+ val |= 0x04; /* 3T */
+ } else if (cas_precharge_delay==4) {
+ val |= 0x08; /* 4T */
+ } else if (cas_precharge_delay>4) {
+ val |= 0x0c;
+ }
+
+ if (ras_cas_delay > 3) {
+ val |= 2;
+ } else {
+ val |= 1;
+ }
+ write_mmcr_byte(SC520_DRCTMCTL, val);
+
+
+ /* We read-back the configuration of the dram
+ * controller that the assembly code wrote */
+ dram_ctrl = read_mmcr_long(SC520_DRCBENDADR);
+
+
+ bd->bi_dram[0].start = 0;
+ if (dram_ctrl & 0x80) {
+ /* bank 0 enabled */
+ dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
+ bd->bi_dram[0].size = bd->bi_dram[1].start;
+
+ } else {
+ bd->bi_dram[0].size = 0;
+ bd->bi_dram[1].start = bd->bi_dram[0].start;
+ }
+
+ if (dram_ctrl & 0x8000) {
+ /* bank 1 enabled */
+ dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
+ bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start;
+ } else {
+ bd->bi_dram[1].size = 0;
+ bd->bi_dram[2].start = bd->bi_dram[1].start;
+ }
+
+ if (dram_ctrl & 0x800000) {
+ /* bank 2 enabled */
+ dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
+ bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start;
+ } else {
+ bd->bi_dram[2].size = 0;
+ bd->bi_dram[3].start = bd->bi_dram[2].start;
+ }
+
+ if (dram_ctrl & 0x80000000) {
+ /* bank 3 enabled */
+ dram_present = (dram_ctrl & 0x7f000000) >> 2;
+ bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start;
+ } else {
+ bd->bi_dram[3].size = 0;
+ }
+
+
+#if 0
+ printf("Configured %d bytes of dram\n", dram_present);
+#endif
+ gd->ram_size = dram_present;
+
+ return dram_present;
+}
+
+
+#ifdef CONFIG_PCI
+
+
+static struct {
+ u8 priority;
+ u16 level_reg;
+ u8 level_bit;
+} sc520_irq[] = {
+ { SC520_IRQ0, SC520_MPICMODE, 0x01 },
+ { SC520_IRQ1, SC520_MPICMODE, 0x02 },
+ { SC520_IRQ2, SC520_SL1PICMODE, 0x02 },
+ { SC520_IRQ3, SC520_MPICMODE, 0x08 },
+ { SC520_IRQ4, SC520_MPICMODE, 0x10 },
+ { SC520_IRQ5, SC520_MPICMODE, 0x20 },
+ { SC520_IRQ6, SC520_MPICMODE, 0x40 },
+ { SC520_IRQ7, SC520_MPICMODE, 0x80 },
+
+ { SC520_IRQ8, SC520_SL1PICMODE, 0x01 },
+ { SC520_IRQ9, SC520_SL1PICMODE, 0x02 },
+ { SC520_IRQ10, SC520_SL1PICMODE, 0x04 },
+ { SC520_IRQ11, SC520_SL1PICMODE, 0x08 },
+ { SC520_IRQ12, SC520_SL1PICMODE, 0x10 },
+ { SC520_IRQ13, SC520_SL1PICMODE, 0x20 },
+ { SC520_IRQ14, SC520_SL1PICMODE, 0x40 },
+ { SC520_IRQ15, SC520_SL1PICMODE, 0x80 }
+};
+
+
+/* The interrupt used for PCI INTA-INTD */
+int sc520_pci_ints[15] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1
+};
+
+/* utility function to configure a pci interrupt */
+int pci_sc520_set_irq(int pci_pin, int irq)
+{
+ int i;
+
+# if 0
+ printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
+#endif
+ if (irq < 0 || irq > 15) {
+ return -1; /* illegal irq */
+ }
+
+ if (pci_pin < 0 || pci_pin > 15) {
+ return -1; /* illegal pci int pin */
+ }
+
+ /* first disable any non-pci interrupt source that use
+ * this level */
+ for (i=SC520_GPTMR0MAP;i<=SC520_GP10IMAP;i++) {
+ if (i>=SC520_PCIINTAMAP&&i<=SC520_PCIINTDMAP) {
+ continue;
+ }
+ if (read_mmcr_byte(i) == sc520_irq[irq].priority) {
+ write_mmcr_byte(i, SC520_IRQ_DISABLED);
+ }
+ }
+
+ /* Set the trigger to level */
+ write_mmcr_byte(sc520_irq[irq].level_reg,
+ read_mmcr_byte(sc520_irq[irq].level_reg) | sc520_irq[irq].level_bit);
+
+
+ if (pci_pin < 4) {
+ /* PCI INTA-INTD */
+ /* route the interrupt */
+ write_mmcr_byte(SC520_PCIINTAMAP + pci_pin, sc520_irq[irq].priority);
+
+
+ } else {
+ /* GPIRQ0-GPIRQ10 used for additional PCI INTS */
+ write_mmcr_byte(SC520_GP0IMAP + pci_pin - 4, sc520_irq[irq].priority);
+
+ /* also set the polarity in this case */
+ write_mmcr_word(SC520_INTPINPOL,
+ read_mmcr_word(SC520_INTPINPOL) | (1 << (pci_pin-4)));
+
+ }
+
+ /* register the pin */
+ sc520_pci_ints[pci_pin] = irq;
+
+
+ return 0; /* OK */
+}
+
+void pci_sc520_init(struct pci_controller *hose)
+{
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* System memory space */
+ pci_set_region(hose->regions + 0,
+ SC520_PCI_MEMORY_BUS,
+ SC520_PCI_MEMORY_PHYS,
+ SC520_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ SC520_PCI_MEM_BUS,
+ SC520_PCI_MEM_PHYS,
+ SC520_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* ISA/PCI memory space */
+ pci_set_region(hose->regions + 2,
+ SC520_ISA_MEM_BUS,
+ SC520_ISA_MEM_PHYS,
+ SC520_ISA_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + 3,
+ SC520_PCI_IO_BUS,
+ SC520_PCI_IO_PHYS,
+ SC520_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* ISA/PCI I/O space */
+ pci_set_region(hose->regions + 4,
+ SC520_ISA_IO_BUS,
+ SC520_ISA_IO_PHYS,
+ SC520_ISA_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 5;
+
+ pci_setup_type1(hose,
+ SC520_REG_ADDR,
+ SC520_REG_DATA);
+
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+
+ /* enable target memory acceses on host brige */
+ pci_write_config_word(0, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+}
+
+
+
+#endif
+
+#ifdef CFG_TIMER_SC520
+
+
+void reset_timer(void)
+{
+ write_mmcr_word(SC520_GPTMR0CNT, 0);
+ write_mmcr_word(SC520_GPTMR0CTL, 0x6001);
+
+}
+
+ulong get_timer(ulong base)
+{
+ /* fixme: 30 or 33 */
+ return read_mmcr_word(SC520_GPTMR0CNT) / 33;
+}
+
+void set_timer(ulong t)
+{
+ /* FixMe: use two cascade coupled timers */
+ write_mmcr_word(SC520_GPTMR0CTL, 0x4001);
+ write_mmcr_word(SC520_GPTMR0CNT, t*33);
+ write_mmcr_word(SC520_GPTMR0CTL, 0x6001);
+}
+
+
+void udelay(unsigned long usec)
+{
+ int m=0;
+ long u;
+
+ read_mmcr_word(SC520_SWTMRMILLI);
+ read_mmcr_word(SC520_SWTMRMICRO);
+
+#if 0
+ /* do not enable this line, udelay is used in the serial driver -> recursion */
+ printf("udelay: %ld m.u %d.%d tm.tu %d.%d\n", usec, m, u, tm, tu);
+#endif
+ while (1) {
+
+ m += read_mmcr_word(SC520_SWTMRMILLI);
+ u = read_mmcr_word(SC520_SWTMRMICRO) + (m * 1000);
+
+ if (usec <= u) {
+ break;
+ }
+ }
+}
+
+#endif
+
+int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
+{
+ u8 temp=0;
+
+ if (freq >= 8192) {
+ temp |= CTL_CLK_SEL_4;
+ } else if (freq >= 4096) {
+ temp |= CTL_CLK_SEL_8;
+ } else if (freq >= 2048) {
+ temp |= CTL_CLK_SEL_16;
+ } else if (freq >= 1024) {
+ temp |= CTL_CLK_SEL_32;
+ } else if (freq >= 512) {
+ temp |= CTL_CLK_SEL_64;
+ } else if (freq >= 256) {
+ temp |= CTL_CLK_SEL_128;
+ } else if (freq >= 128) {
+ temp |= CTL_CLK_SEL_256;
+ } else {
+ temp |= CTL_CLK_SEL_512;
+ }
+
+ if (!lsb_first) {
+ temp |= MSBF_ENB;
+ }
+
+ if (inv_clock) {
+ temp |= CLK_INV_ENB;
+ }
+
+ if (inv_phase) {
+ temp |= PHS_INV_ENB;
+ }
+
+ write_mmcr_byte(SC520_SSICTL, temp);
+
+ return 0;
+}
+
+u8 ssi_txrx_byte(u8 data)
+{
+ write_mmcr_byte(SC520_SSIXMIT, data);
+ while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
+ write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMITRCV);
+ while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
+ return read_mmcr_byte(SC520_SSIRCV);
+}
+
+
+void ssi_tx_byte(u8 data)
+{
+ write_mmcr_byte(SC520_SSIXMIT, data);
+ while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
+ write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_XMIT);
+}
+
+u8 ssi_rx_byte(void)
+{
+ while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
+ write_mmcr_byte(SC520_SSICMD, SSICMD_CMD_SEL_RCV);
+ while ((read_mmcr_byte(SC520_SSISTA)) & SSISTA_BSY);
+ return read_mmcr_byte(SC520_SSIRCV);
+}
+
+#endif /* CONFIG_SC520 */
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
new file mode 100644
index 0000000..7a957c7
--- /dev/null
+++ b/cpu/i386/sc520_asm.S
@@ -0,0 +1,536 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This file is largely based on code obtned from AMD. AMD's original
+ * copyright is included below
+ */
+
+/*
+ * =============================================================================
+ *
+ * Copyright 1999 Advanced Micro Devices, Inc.
+ *
+ * This software is the property of Advanced Micro Devices, Inc (AMD) which
+ * specifically grants the user the right to modify, use and distribute this
+ * software provided this COPYRIGHT NOTICE is not removed or altered. All
+ * other rights are reserved by AMD.
+ *
+ * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY
+ * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF
+ * THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
+ * IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER
+ * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
+ * INTERRUPTION, LOSS OF INFORMAITON) ARISING OUT OF THE USE OF OR INABILITY
+ * TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR
+ * LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
+ * LIMITATION MAY NOT APPLY TO YOU.
+ *
+ * AMD does not assume any responsibility for any errors that may appear in
+ * the Materials nor any responsibility to support or update the Materials.
+ * AMD retains the right to make changes to its test specifications at any
+ * time, without notice.
+ *
+ * So that all may benefit from your experience, please report any problems
+ * or suggestions about this software back to AMD. Please include your name,
+ * company, telephone number, AMD product requiring support and question or
+ * problem encountered.
+ *
+ * Advanced Micro Devices, Inc. Worldwide support and contact
+ * Embedded Processor Division information available at:
+ * Systems Engineering epd.support@amd.com
+ * 5204 E. Ben White Blvd. -or-
+ * Austin, TX 78741 http://www.amd.com/html/support/techsup.html
+ * ============================================================================
+ */
+
+
+/*******************************************************************************
+ * AUTHOR : Buddy Fey - Original.
+ *******************************************************************************
+ */
+
+
+/*******************************************************************************
+ * FUNCTIONAL DESCRIPTION:
+ * This routine is called to autodetect the geometry of the DRAM.
+ *
+ * This routine is called to determine the number of column bits for the DRAM
+ * devices in this external bank. This routine assumes that the external bank
+ * has been configured for an 11-bit column and for 4 internal banks. This gives
+ * us the maximum address reach in memory. By writing a test value to the max
+ * address and locating where it aliases to, we can determine the number of valid
+ * column bits.
+ *
+ * This routine is called to determine the number of internal banks each DRAM
+ * device has. The external bank (under test) is configured for maximum reach
+ * with 11-bit columns and 4 internal banks. This routine will write to a max
+ * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if
+ * that column is a "don't care". If BA1 does not affect write/read of data,
+ * then this device has only 2 internal banks.
+ *
+ * This routine is called to determine the ending address for this external
+ * bank of SDRAM. We write to a max address with a data value and then disable
+ * row address bits looking for "don't care" locations. Each "don't care" bit
+ * represents a dividing of the maximum density (128M) by 2. By dividing the
+ * maximum of 32 4M chunks in an external bank down by all the "don't care" bits
+ * determined during sizing, we set the proper density.
+ *
+ * WARNINGS.
+ * bp must be preserved because it is used for return linkage.
+ *
+ * EXIT
+ * nothing returned - but the memory subsystem is enabled
+ *******************************************************************************
+ */
+
+#include <config.h>
+#ifdef CONFIG_SC520
+
+.section .text
+.equ DRCCTL, 0x0fffef010 /* DRAM control register */
+.equ DRCTMCTL, 0x0fffef012 /* DRAM timing control register */
+.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */
+.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */
+.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */
+.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */
+
+.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */
+.equ COL11_ADR, 0x0e001e00 /* 11 col addrs */
+.equ COL10_ADR, 0x0e000e00 /* 10 col addrs */
+.equ COL09_ADR, 0x0e000600 /* 9 col addrs */
+.equ COL08_ADR, 0x0e000200 /* 8 col addrs */
+.equ ROW14_ADR, 0x0f000000 /* 14 row addrs */
+.equ ROW13_ADR, 0x07000000 /* 13 row addrs */
+.equ ROW12_ADR, 0x03000000 /* 12 row addrs */
+.equ ROW11_ADR, 0x01000000 /* 11 row addrs/also bank switch */
+.equ ROW10_ADR, 0x00000000 /* 10 row addrs/also bank switch */
+.equ COL11_DATA, 0x0b0b0b0b /* 11 col addrs */
+.equ COL10_DATA, 0x0a0a0a0a /* 10 col data */
+.equ COL09_DATA, 0x09090909 /* 9 col data */
+.equ COL08_DATA, 0x08080808 /* 8 col data */
+.equ ROW14_DATA, 0x3f3f3f3f /* 14 row data (MASK) */
+.equ ROW13_DATA, 0x1f1f1f1f /* 13 row data (MASK) */
+.equ ROW12_DATA, 0x0f0f0f0f /* 12 row data (MASK) */
+.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */
+.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */
+
+
+ /*
+ * initialize dram controller registers
+ */
+.globl mem_init
+mem_init:
+ xorw %ax,%ax
+ movl $DBCTL, %edi
+ movb %al, (%edi) /* disable write buffer */
+
+ movl $ECCCTL, %edi
+ movb %al, (%edi) /* disable ECC */
+
+ movl $DRCTMCTL, %edi
+ movb $0x1E,%al /* Set SDRAM timing for slowest */
+ movb %al, (%edi)
+
+ /*
+ * setup loop to do 4 external banks starting with bank 3
+ */
+ movl $0xff000000,%eax /* enable last bank and setup */
+ movl $DRCBENDADR, %edi /* ending address register */
+ movl %eax, (%edi)
+
+ movl $DRCCFG, %edi /* setup */
+ movw $0xbbbb,%ax /* dram config register for */
+ movw %ax, (%edi)
+
+ /*
+ * issue a NOP to all DRAMs
+ */
+ movl $DRCCTL, %edi /* setup DRAM control register with */
+ movb $0x1,%al /* Disable refresh,disable write buffer */
+ movb %al, (%edi)
+ movl $CACHELINESZ, %esi /* just a dummy address to write for */
+ movw %ax, (%esi)
+ /*
+ * delay for 100 usec? 200?
+ * ******this is a cludge for now *************
+ */
+ movw $100,%cx
+sizdelay:
+ loop sizdelay /* we need 100 usec here */
+ /***********************************************/
+
+ /*
+ * issue all banks precharge
+ */
+ movb $0x2,%al /* All banks precharge */
+ movb %al, (%edi)
+ movw %ax, (%esi)
+
+ /*
+ * issue 2 auto refreshes to all banks
+ */
+ movb $0x4,%al /* Auto refresh cmd */
+ movb %al, (%edi)
+ movw $2,%cx
+refresh1:
+ movw %ax, (%esi)
+ loop refresh1
+
+ /*
+ * issue LOAD MODE REGISTER command
+ */
+ movb $0x3,%al /* Load mode register cmd */
+ movb %al, (%edi)
+ movw %ax, (%esi)
+
+ /*
+ * issue 8 more auto refreshes to all banks
+ */
+ movb $0x4,%al /* Auto refresh cmd */
+ movb %al, (%edi)
+ movw $8,%cx
+refresh2:
+ movw %ax, (%esi)
+ loop refresh2
+
+ /*
+ * set control register to NORMAL mode
+ */
+ movb $0x0,%al /* Normal mode value */
+ movb %al, (%edi)
+
+ /*
+ * size dram starting with external bank 3 moving to external bank 0
+ */
+ movl $0x3,%ecx /* start with external bank 3 */
+
+nextbank:
+
+ /*
+ * write col 11 wrap adr
+ */
+ movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
+ movl $COL11_DATA, %eax /* pattern for max supported columns(11) */
+ movl %eax, (%esi) /* write max col pattern at max col adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write col 10 wrap adr
+ */
+
+ movl $COL10_ADR, %esi /* set address to 10 col wrap address */
+ movl $COL10_DATA, %eax /* pattern for 10 col wrap */
+ movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write col 9 wrap adr
+ */
+ movl $COL09_ADR, %esi /* set address to 9 col wrap address */
+ movl $COL09_DATA, %eax /* pattern for 9 col wrap */
+ movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write col 8 wrap adr
+ */
+ movl $COL08_ADR, %esi /* set address to min(8) col wrap address */
+ movl $COL08_DATA, %eax /* pattern for min (8) col wrap */
+ movl %eax, (%esi) /* write min col pattern @ min col adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write row 14 wrap adr
+ */
+ movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */
+ movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */
+ movl %eax, (%esi) /* write max row pattern at max row adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write row 13 wrap adr
+ */
+ movl $ROW13_ADR, %esi /* set address to 13 row wrap address */
+ movl $ROW13_DATA, %eax /* pattern for 13 row wrap */
+ movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write row 12 wrap adr
+ */
+ movl $ROW12_ADR, %esi /* set address to 12 row wrap address */
+ movl $ROW12_DATA, %eax /* pattern for 12 row wrap */
+ movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write row 11 wrap adr
+ */
+ movl $ROW11_ADR, %edi /* set address to 11 row wrap address */
+ movl $ROW11_DATA, %eax /* pattern for 11 row wrap */
+ movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */
+ movl (%edi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * write row 10 wrap adr --- this write is really to determine number of banks
+ */
+ movl $ROW10_ADR, %edi /* set address to 10 row wrap address */
+ movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */
+ movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */
+ movl (%edi), %ebx /* optional read */
+ cmpl %ebx,%eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+ /*
+ * read data @ row 12 wrap adr to determine * banks,
+ * and read data @ row 14 wrap adr to determine * rows.
+ * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
+ * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
+ * if data @ row 12 wrap == 11 or 12, we have 4 banks,
+ */
+ xorw %di,%di /* value for 2 banks in DI */
+ movl (%esi), %ebx /* read from 12 row wrap to check banks
+ * (esi is setup from the write to row 12 wrap) */
+ cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */
+ jz only2 /* if pattern == AA, we only have 2 banks */
+
+ /* 4 banks */
+
+ movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */
+ cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */
+ jz only2
+ cmpl $ROW12_DATA, %ebx /* and 12 */
+ jnz bad_ram /* its bad if not 11 or 12! */
+
+ /* fall through */
+only2:
+ /*
+ * validate row mask
+ */
+ movl $ROW14_ADR, %esi /* set address back to max row wrap addr */
+ movl (%esi), %eax /* read actual number of rows @ row14 adr */
+
+ cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */
+ jb bad_ram
+
+ cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */
+ ja bad_ram
+
+ cmpb %ah,%al /* verify all 4 bytes of dword same */
+ jnz bad_ram
+ movl %eax,%ebx
+ shrl $16,%ebx
+ cmpw %bx,%ax
+ jnz bad_ram
+ /*
+ * read col 11 wrap adr for real column data value
+ */
+ movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
+ movl (%esi), %eax /* read real col number at max col adr */
+ /*
+ * validate column data
+ */
+ cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */
+ jb bad_ram
+
+ cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */
+ ja bad_ram
+
+ subl $COL08_DATA, %eax /* normalize column data to zero */
+ jc bad_ram
+ cmpb %ah,%al /* verify all 4 bytes of dword equal */
+ jnz bad_ram
+ movl %eax,%edx
+ shrl $16,%edx
+ cmpw %dx,%ax
+ jnz bad_ram
+ /*
+ * merge bank and col data together
+ */
+ addw %di,%dx /* merge of bank and col info in dl */
+ /*
+ * fix ending addr mask based upon col info
+ */
+ movb $3,%al
+ subb %dh,%al /* dh contains the overflow from the bank/col merge */
+ movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
+ xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
+ shrb %cl,%dh /* */
+ incb %dh /* ending addr is 1 greater than real end */
+ xchgw %cx,%ax /* cx is bank number again */
+ /*
+ * issue all banks precharge
+ */
+bad_reint:
+ movl $DRCCTL, %esi /* setup DRAM control register with */
+ movb $0x2,%al /* All banks precharge */
+ movb %al, (%esi)
+ movl $CACHELINESZ, %esi /* address to init read buffer */
+ movw %ax, (%esi)
+
+ /*
+ * update ENDING ADDRESS REGISTER
+ */
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movl %ecx,%ebx
+ addl %ebx, %edi
+ movb %dh, (%edi)
+ /*
+ * update CONFIG REGISTER
+ */
+ xorb %dh,%dh
+ movw $0x00f,%bx
+ movw %cx,%ax
+ shlw $2,%ax
+ xchgw %cx,%ax
+ shlw %cl,%dx
+ shlw %cl,%bx
+ notw %bx
+ xchgw %cx,%ax
+ movl $DRCCFG, %edi
+ mov (%edi), %ax
+ andw %bx,%ax
+ orw %dx,%ax
+ movw %ax, (%edi)
+ jcxz cleanup
+
+ decw %cx
+ movl %ecx,%ebx
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movb $0xff,%al
+ addl %ebx, %edi
+ movb %al, (%edi)
+ /*
+ * set control register to NORMAL mode
+ */
+ movl $DRCCTL, %esi /* setup DRAM control register with */
+ movb $0x0,%al /* Normal mode value */
+ movb %al, (%esi)
+ movl $CACHELINESZ, %esi /* address to init read buffer */
+ movw %ax, (%esi)
+ jmp nextbank
+
+cleanup:
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movw $4,%cx
+ xorw %ax,%ax
+cleanuplp:
+ movb (%edi), %al
+ orb %al,%al
+ jz emptybank
+
+ addb %ah,%al
+ jns nottoomuch
+
+ movb $0x7f,%al
+nottoomuch:
+ movb %al,%ah
+ orb $0x80,%al
+ movb %al, (%edi)
+emptybank:
+ incl %edi
+ loop cleanuplp
+
+#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
+ /* set the CAS latency now since it is hard to do
+ * when we run from the RAM */
+ movl $DRCTMCTL, %edi /* DRAM timing register */
+ movb (%edi), %al
+#ifdef CFG_SDRAM_CAS_LATENCY_2T
+ andb $0xef, %al
+#endif
+#ifdef CFG_SDRAM_CAS_LATENCY_3T
+ orb $0x10, %al
+#endif
+ movb %al, (%edi)
+#endif
+ movl $DRCCTL, %edi /* DRAM Control register */
+ movb $0x3,%al /* Load mode register cmd */
+ movb %al, (%edi)
+ movw %ax, (%esi)
+
+
+ movl $DRCCTL, %edi /* DRAM Control register */
+ movb $0x18,%al /* Enable refresh and NORMAL mode */
+ movb %al, (%edi)
+
+ jmp dram_done
+
+bad_ram:
+ xorl %edx,%edx
+ xorl %edi,%edi
+ jmp bad_reint
+
+dram_done:
+
+ /* readback DRCBENDADR and return the number
+ * of available ram bytes in %eax */
+
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+
+ movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x80000000, %ecx
+ jz bank2
+ andl $0x7f000000, %eax
+ shrl $2, %eax
+ movl %eax, %ebx
+
+bank2: movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x00800000, %ecx
+ jz bank1
+ andl $0x007f0000, %eax
+ shll $6, %eax
+ movl %eax, %ebx
+
+bank1: movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x00008000, %ecx
+ jz bank0
+ andl $0x00007f00, %eax
+ shll $14, %eax
+ movl %eax, %ebx
+
+bank0: movl (%edi), %eax
+ movl %eax, %ecx
+ andl $0x00000080, %ecx
+ jz done
+ andl $0x0000007f, %eax
+ shll $22, %eax
+ movl %eax, %ebx
+
+done: movl %ebx, %eax
+
+ jmp *%ebp
+
+
+#endif /* CONFIG_SC520 */
diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c
index c0d2e8a..22c3c2a 100644
--- a/cpu/i386/serial.c
+++ b/cpu/i386/serial.c
@@ -24,6 +24,7 @@
* MA 02111-1307 USA
*/
/*------------------------------------------------------------------------------+ */
+
/*
* This source code has been made available to you by IBM on an AS-IS
* basis. Anyone receiving this source is licensed under IBM
@@ -89,13 +90,15 @@
char *rx_buffer;
ulong rx_put;
ulong rx_get;
+ int cts;
} serial_buffer_t;
-volatile static serial_buffer_t buf_info;
+volatile serial_buffer_t buf_info;
+static int serial_buffer_active=0;
#endif
-static int serial_div (int baudrate )
+static int serial_div(int baudrate)
{
switch (baudrate) {
@@ -112,7 +115,8 @@
case 115200:
return 1;
}
- hang ();
+
+ return 12;
}
@@ -121,7 +125,7 @@
* as serial console interface.
*/
-int serial_init (void)
+int serial_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -134,24 +138,24 @@
outb(bdiv, UART0_BASE + UART_DLL); /* set baudrate divisor */
outb(bdiv >> 8, UART0_BASE + UART_DLM);/* set baudrate divisor */
outb(0x03, UART0_BASE + UART_LCR); /* clear DLAB; set 8 bits, no parity */
- outb(0x00, UART0_BASE + UART_FCR); /* disable FIFO */
- outb(0x00, UART0_BASE + UART_MCR); /* no modem control DTR RTS */
+ outb(0x01, UART0_BASE + UART_FCR); /* enable FIFO */
+ outb(0x0b, UART0_BASE + UART_MCR); /* Set DTR and RTS active */
val = inb(UART0_BASE + UART_LSR); /* clear line status */
val = inb(UART0_BASE + UART_RBR); /* read receive buffer */
outb(0x00, UART0_BASE + UART_SCR); /* set scratchpad */
outb(0x00, UART0_BASE + UART_IER); /* set interrupt enable reg */
- return (0);
+ return 0;
}
-void serial_setbrg (void)
+void serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
unsigned short bdiv;
- bdiv = serial_div (gd->baudrate);
+ bdiv = serial_div(gd->baudrate);
outb(0x80, UART0_BASE + UART_LCR); /* set DLAB bit */
outb(bdiv&0xff, UART0_BASE + UART_DLL); /* set baudrate divisor */
@@ -160,7 +164,7 @@
}
-void serial_putc (const char c)
+void serial_putc(const char c)
{
int i;
@@ -169,31 +173,38 @@
/* check THRE bit, wait for transmiter available */
for (i = 1; i < 3500; i++) {
- if ((inb (UART0_BASE + UART_LSR) & 0x20) == 0x20)
+ if ((inb (UART0_BASE + UART_LSR) & 0x20) == 0x20) {
break;
- udelay (100);
+ }
+ udelay(100);
}
outb(c, UART0_BASE + UART_THR); /* put character out */
}
-void serial_puts (const char *s)
+void serial_puts(const char *s)
{
while (*s) {
- serial_putc (*s++);
+ serial_putc(*s++);
}
}
-int serial_getc ()
+int serial_getc(void)
{
unsigned char status = 0;
+#if CONFIG_SERIAL_SOFTWARE_FIFO
+ if (serial_buffer_active) {
+ return serial_buffered_getc();
+ }
+#endif
+
while (1) {
#if defined(CONFIG_HW_WATCHDOG)
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
+ WATCHDOG_RESET(); /* Reset HW Watchdog, if needed */
#endif /* CONFIG_HW_WATCHDOG */
- status = inb (UART0_BASE + UART_LSR);
+ status = inb(UART0_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
break;
}
@@ -211,11 +222,17 @@
}
-int serial_tstc ()
+int serial_tstc(void)
{
unsigned char status;
- status = inb (UART0_BASE + UART_LSR);
+#if CONFIG_SERIAL_SOFTWARE_FIFO
+ if (serial_buffer_active) {
+ return serial_buffered_tstc();
+ }
+#endif
+
+ status = inb(UART0_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
return (1);
}
@@ -234,36 +251,50 @@
#if CONFIG_SERIAL_SOFTWARE_FIFO
-void serial_isr (void *arg)
+void serial_isr(void *arg)
{
int space;
int c;
- const int rx_get = buf_info.rx_get;
int rx_put = buf_info.rx_put;
- if (rx_get <= rx_put) {
- space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
+ if (buf_info.rx_get <= rx_put) {
+ space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - buf_info.rx_get);
} else {
- space = rx_get - rx_put;
+ space = buf_info.rx_get - rx_put;
}
- while (serial_tstc ()) {
- c = serial_getc ();
+
+ while (inb(UART0_BASE + UART_LSR) & 1) {
+ c = inb(UART0_BASE);
if (space) {
buf_info.rx_buffer[rx_put++] = c;
space--;
+
+ if (rx_put == buf_info.rx_get) {
+ buf_info.rx_get++;
+ if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) {
+ buf_info.rx_get = 0;
+ }
+ }
+
+ if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) {
+ rx_put = 0;
+ if (0 == buf_info.rx_get) {
+ buf_info.rx_get = 1;
+ }
+
+ }
+
}
- if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO)
- rx_put = 0;
if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
/* Stop flow by setting RTS inactive */
- outb(inb (UART0_BASE + UART_MCR) & (0xFF ^ 0x02),
+ outb(inb(UART0_BASE + UART_MCR) & (0xFF ^ 0x02),
UART0_BASE + UART_MCR);
}
}
buf_info.rx_put = rx_put;
}
-void serial_buffered_init (void)
+void serial_buffered_init(void)
{
serial_puts ("Switching to interrupt driven serial input mode.\n");
buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO);
@@ -272,8 +303,10 @@
if (inb (UART0_BASE + UART_MSR) & 0x10) {
serial_puts ("Check CTS signal present on serial port: OK.\n");
+ buf_info.cts = 1;
} else {
serial_puts ("WARNING: CTS signal not present on serial port.\n");
+ buf_info.cts = 0;
}
irq_install_handler ( VECNUM_U0 /*UART0 *//*int vec */ ,
@@ -283,32 +316,49 @@
/* Enable "RX Data Available" Interrupt on UART */
/* outb(inb(UART0_BASE + UART_IER) |0x01, UART0_BASE + UART_IER); */
outb(0x01, UART0_BASE + UART_IER);
- /* Set DTR active */
- outb(inb (UART0_BASE + UART_MCR) | 0x01, UART0_BASE + UART_MCR);
- /* Start flow by setting RTS active */
- outb(inb (UART0_BASE + UART_MCR) | 0x02, UART0_BASE + UART_MCR);
- /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
- outb((1 << 6) | 1, UART0_BASE + UART_FCR);
+
+ /* Set DTR and RTS active, enable interrupts */
+ outb(inb (UART0_BASE + UART_MCR) | 0x0b, UART0_BASE + UART_MCR);
+
+ /* Setup UART FIFO: RX trigger level: 1 byte, Enable FIFO */
+ outb( /*(1 << 6) |*/ 1, UART0_BASE + UART_FCR);
+
+ serial_buffer_active = 1;
}
void serial_buffered_putc (const char c)
{
+ int i;
/* Wait for CTS */
#if defined(CONFIG_HW_WATCHDOG)
while (!(inb (UART0_BASE + UART_MSR) & 0x10))
WATCHDOG_RESET ();
#else
- while (!(inb (UART0_BASE + UART_MSR) & 0x10));
+ if (buf_info.cts) {
+ for (i=0;i<1000;i++) {
+ if ((inb (UART0_BASE + UART_MSR) & 0x10)) {
+ break;
+ }
+ }
+ if (i!=1000) {
+ buf_info.cts = 0;
+ }
+ } else {
+ if ((inb (UART0_BASE + UART_MSR) & 0x10)) {
+ buf_info.cts = 1;
+ }
+ }
+
#endif
serial_putc (c);
}
-void serial_buffered_puts (const char *s)
+void serial_buffered_puts(const char *s)
{
serial_puts (s);
}
-int serial_buffered_getc (void)
+int serial_buffered_getc(void)
{
int space;
int c;
@@ -322,8 +372,9 @@
while (rx_get == buf_info.rx_put);
#endif
c = buf_info.rx_buffer[rx_get++];
- if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO)
+ if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO) {
rx_get = 0;
+ }
buf_info.rx_get = rx_get;
rx_put = buf_info.rx_put;
@@ -340,7 +391,7 @@
return c;
}
-int serial_buffered_tstc (void)
+int serial_buffered_tstc(void)
{
return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0;
}
@@ -358,7 +409,7 @@
configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE
*/
#if (CONFIG_KGDB_SER_INDEX & 2)
-void kgdb_serial_init (void)
+void kgdb_serial_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -381,7 +432,7 @@
}
-void putDebugChar (const char c)
+void putDebugChar(const char c)
{
if (c == '\n')
serial_putc ('\r');
@@ -393,7 +444,7 @@
}
-void putDebugStr (const char *s)
+void putDebugStr(const char *s)
{
while (*s) {
serial_putc(*s++);
@@ -401,7 +452,7 @@
}
-int getDebugChar (void)
+int getDebugChar(void)
{
unsigned char status = 0;
@@ -424,34 +475,34 @@
}
-void kgdb_interruptible (int yes)
+void kgdb_interruptible(int yes)
{
return;
}
#else /* ! (CONFIG_KGDB_SER_INDEX & 2) */
-void kgdb_serial_init (void)
+void kgdb_serial_init(void)
{
serial_printf ("[on serial] ");
}
-void putDebugChar (int c)
+void putDebugChar(int c)
{
serial_putc (c);
}
-void putDebugStr (const char *str)
+void putDebugStr(const char *str)
{
serial_puts (str);
}
-int getDebugChar (void)
+int getDebugChar(void)
{
return serial_getc ();
}
-void kgdb_interruptible (int yes)
+void kgdb_interruptible(int yes)
{
return;
}
diff --git a/cpu/i386/start16.S b/cpu/i386/start16.S
index 590a5a6..a34642f 100644
--- a/cpu/i386/start16.S
+++ b/cpu/i386/start16.S
@@ -1,7 +1,7 @@
/*
* U-boot - i386 Startup Code
*
- * Copyright (c) 2002 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se>
+ * Copyright (c) 2002, 2003 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -40,7 +40,7 @@
/* Turn of cache (this might require a 486-class CPU) */
movl %cr0, %eax
- orl $060000000,%eax
+ orl $0x60000000,%eax
movl %eax, %cr0
wbinvd
diff --git a/cpu/mpc824x/start.S b/cpu/mpc824x/start.S
index d45bb36..c14612b 100644
--- a/cpu/mpc824x/start.S
+++ b/cpu/mpc824x/start.S
@@ -543,7 +543,7 @@
mr r10, r5 /* Save copy of Destination Address */
mr r3, r5 /* Destination Address */
-#ifdef DEBUG
+#ifdef CFG_RAMBOOT
lis r4, CFG_SDRAM_BASE@h /* Source Address */
ori r4, r4, CFG_SDRAM_BASE@l
#else
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index 47c5dae..6d16c04 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -353,6 +353,12 @@
pci_hose_write_config_word(hose, host_devno, PCI_COMMAND,
tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+#ifdef CONFIG_MPC8266ADS
+ /* do some bridge init, should be done on all 8260 based bridges */
+ pci_hose_write_config_byte(hose, host_devno, PCI_CACHE_LINE_SIZE, 0x08);
+ pci_hose_write_config_byte(hose, host_devno, PCI_LATENCY_TIMER, 0xF8);
+#endif
+
hose->first_busno = 0;
hose->last_busno = 0xff;
@@ -373,11 +379,11 @@
/* PCI memory space */
#ifdef CONFIG_MPC8266ADS
- pci_set_region(hose->regions + 0,
- PCI_SLV_MEM_BUS,
- PCI_SLV_MEM_LOCAL,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ pci_set_region(hose->regions + 1,
+ PCI_MSTR_MEMIO_BUS,
+ PCI_MSTR_MEMIO_LOCAL,
+ PCI_MSTR_MEMIO_SIZE,
+ PCI_REGION_MEM);
#else
pci_set_region(hose->regions + 1,
PCI_MSTR_MEM_BUS,