pinctrl: sunxi: Add NAND pinmuxes
NAND is always at function 2 on port C.
Pin lists and mux values were taken from the Linux drivers.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index c4fbda7..e510218 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -269,6 +269,7 @@
#endif
{ "mmc2", 3 }, /* PC6-PC15 */
{ "mmc3", 2 }, /* PI4-PI9 */
+ { "nand0", 2 }, /* PC0-PC24 */
{ "spi0", 3 }, /* PC0-PC2, PC23 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
@@ -293,6 +294,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG3-PG8 */
{ "mmc2", 3 }, /* PC6-PC15 */
+ { "nand0", 2 }, /* PC0-PC19 */
{ "spi0", 3 }, /* PC0-PC3 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
@@ -319,6 +321,7 @@
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC6-PC15, PC24 */
{ "mmc3", 4 }, /* PC6-PC15, PC24 */
+ { "nand0", 2 }, /* PC0-PC26 */
{ "spi0", 3 }, /* PC0-PC2, PC27 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
@@ -363,6 +366,7 @@
{ "mmc1", 4 }, /* PG0-PG5 */
#endif
{ "mmc2", 3 }, /* PC5-PC15, PC24 */
+ { "nand0", 2 }, /* PC0-PC24 */
{ "spi0", 3 }, /* PC0-PC2, PC23 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
@@ -386,6 +390,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
+ { "nand0", 2 }, /* PC0-PC16 */
{ "spi0", 3 }, /* PC0-PC3 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
@@ -424,6 +429,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
+ { "nand0", 2 }, /* PC0-PC16 */
{ "spi0", 3 }, /* PC0-PC3 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
@@ -450,6 +456,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
+ { "nand0", 2 }, /* PC0-PC18 */
{ "spi0", 3 }, /* PC0-PC3 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
@@ -491,6 +498,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
+ { "nand0", 2 }, /* PC0-PC16 */
{ "spi0", 3 }, /* PC0-PC3 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
@@ -557,6 +565,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC6-PC16 */
+ { "nand0", 2 }, /* PC0-PC18 */
{ "spi0", 3 }, /* PC0-PC2, PC19 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
@@ -597,6 +606,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC1-PC16 */
+ { "nand0", 2 }, /* PC0-PC16 */
{ "pwm", 2 }, /* PD22 */
{ "spi0", 4 }, /* PC0-PC3 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
@@ -639,6 +649,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC1-PC16 */
+ { "nand0", 2 }, /* PC0-PC16 */
{ "spi0", 3 }, /* PC0-PC3 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
@@ -665,6 +676,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC1-PC14 */
+ { "nand0", 2 }, /* PC0-PC16 */
{ "spi0", 4 }, /* PC0-PC7 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
@@ -703,6 +715,7 @@
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC0-PC16 */
+ { "nand0", 2 }, /* PC0-PC16 */
{ "spi0", 4 }, /* PC0-PC7, PC15-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */