ARM: Tegra210: Add support to common Tegra source/config files
Derived from Tegra124, modified as appropriate during T210
board bringup. Cleaned up debug statements to conserve
string space, too. This also adds misc 64-bit changes
from Thierry Reding/Stephen Warren.
Signed-off-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index 31b6c56..6f8b4d0 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -2,7 +2,7 @@
* (C) Copyright 2009 SAMSUNG Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Jaehoon Chung <jh80.chung@samsung.com>
- * Portions Copyright 2011-2013 NVIDIA Corporation
+ * Portions Copyright 2011-2015 NVIDIA Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -668,6 +668,16 @@
const void *blob = gd->fdt_blob;
debug("%s entry\n", __func__);
+ /* See if any Tegra210 MMC controllers are present */
+ count = fdtdec_find_aliases_for_id(blob, "sdhci",
+ COMPAT_NVIDIA_TEGRA210_SDMMC, node_list,
+ CONFIG_SYS_MMC_MAX_DEVICE);
+ debug("%s: count of Tegra210 sdhci nodes is %d\n", __func__, count);
+ if (process_nodes(blob, node_list, count)) {
+ printf("%s: Error processing T30 mmc node(s)!\n", __func__);
+ return;
+ }
+
/* See if any Tegra124 MMC controllers are present */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
COMPAT_NVIDIA_TEGRA124_SDMMC, node_list,
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index e2574d7..0edd557 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
- * Copyright (c) 2009-2013 NVIDIA Corporation
+ * Copyright (c) 2009-2015 NVIDIA Corporation
* Copyright (c) 2013 Lucas Stach
*
* SPDX-License-Identifier: GPL-2.0+
@@ -64,6 +64,7 @@
USB_CTLR_T20,
USB_CTLR_T30,
USB_CTLR_T114,
+ USB_CTLR_T210,
USB_CTRL_COUNT,
};
@@ -149,6 +150,15 @@
{ 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 0xB }
};
+/* NOTE: 13/26MHz settings are N/A for T210, so dupe 12MHz settings for now */
+static const unsigned T210_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+ /* DivN, DivM, DivP, KCP, KVCO, Delays Debounce, Bias */
+ { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 },
+ { 0x019, 0x01, 0x01, 0x0, 0, 0x03, 0x4B, 0x0C, 0xBB, 48000, 8 },
+ { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 },
+ { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 },
+};
+
/* UTMIP Idle Wait Delay */
static const u8 utmip_idle_wait_delay = 17;
@@ -177,6 +187,10 @@
.has_hostpc = 1,
.pll_parameter = (const unsigned *)T114_usb_pll,
},
+ {
+ .has_hostpc = 1,
+ .pll_parameter = (const unsigned *)T210_usb_pll,
+ },
};
/*
@@ -458,6 +472,16 @@
UTMIP_DEBOUNCE_CFG0_MASK,
timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
+ if (timing[PARAM_DEBOUNCE_A_TIME] > 0xFFFF) {
+ clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
+ UTMIP_DEBOUNCE_CFG0_MASK,
+ (timing[PARAM_DEBOUNCE_A_TIME] >> 1)
+ << UTMIP_DEBOUNCE_CFG0_SHIFT);
+ clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
+ UTMIP_BIAS_DEBOUNCE_TIMESCALE_MASK,
+ 1 << UTMIP_BIAS_DEBOUNCE_TIMESCALE_SHIFT);
+ }
+
setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
/* Disable battery charge enabling bit */
@@ -643,6 +667,10 @@
static void config_clock(const u32 timing[])
{
+ debug("%s: DIVM = %d, DIVN = %d, DIVP = %d, cpcon/lfcon = %d/%d\n",
+ __func__, timing[PARAM_DIVM], timing[PARAM_DIVN],
+ timing[PARAM_DIVP], timing[PARAM_CPCON], timing[PARAM_LFCON]);
+
clock_start_pll(CLOCK_ID_USB,
timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
timing[PARAM_CPCON], timing[PARAM_LFCON]);
@@ -823,6 +851,7 @@
{ .compatible = "nvidia,tegra20-ehci", .data = USB_CTLR_T20 },
{ .compatible = "nvidia,tegra30-ehci", .data = USB_CTLR_T30 },
{ .compatible = "nvidia,tegra114-ehci", .data = USB_CTLR_T114 },
+ { .compatible = "nvidia,tegra210-ehci", .data = USB_CTLR_T210 },
{ }
};