Add support for multiple PHYs.
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 9a3acfe..c08b2c3 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -90,6 +90,7 @@
CFG_CMD_SNTP )
#define CONFIG_NET_MULTI
+#define CONFIG_MII
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index fd15b85..32d59a4 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -88,6 +88,7 @@
# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
# define CONFIG_FEC_ENET 1 /* use FEC ethernet */
+# define CONFIG_MII 1
# define CFG_DISCOVER_PHY 1
# define CONFIG_FEC_UTOPIA 1
# define CONFIG_ETHADDR 08:00:06:26:A2:6D
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index b0c8ac6..73ff0a3 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -85,6 +85,7 @@
#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
+#define CONFIG_MII 1
#if 1
#define CFG_DISCOVER_PHY 1
#else
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 6a9a05d..9d4e7b2 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -71,6 +71,7 @@
#define CFG_XLB_PIPELINING 1
#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
@@ -79,6 +80,7 @@
#else /* MPC5100 */
+#define CONFIG_MII 1
#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
#endif
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 3457770..4d39b35 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -141,6 +141,7 @@
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
#define CFG_DISCOVER_PHY
+#define CONFIG_MII
#if 0
#define CONFIG_ETHADDR 00:0B:64:00:00:00 /* our OUI from IEEE */
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 5bad824..9a42cb1 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -150,6 +150,7 @@
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
#define CFG_DISCOVER_PHY
+#define CONFIG_MII
#if 0
#define CONFIG_ETHADDR 00:0B:64:80:00:00 /* our OUI from IEEE */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index db878cb..2d5031b 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -43,7 +43,9 @@
#define CONFIG_PCI
#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#undef CONFIG_TSEC_ENET /* tsec ethernet support */
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
+#define CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 49ae55c..1189989 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -72,6 +72,7 @@
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#undef CONFIG_NS8382X
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 0b8c71d..da01186 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -235,7 +235,7 @@
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
#define CONFIG_E1000
#undef CONFIG_TULIP
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index 8d29a31..37c5cf4 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -56,6 +56,7 @@
#define CONFIG_QS860T 1 /* ...on a QS860T module */
#define CONFIG_FEC_ENET 1 /* FEC 10/100BaseT ethernet */
+#define CONFIG_MII
#define FEC_INTERRUPT SIU_LEVEL1
#undef CONFIG_SCC1_ENET /* SCC1 10BaseT ethernet */
#define CFG_DISCOVER_PHY
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 9ce83b4..c1c765f 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -142,6 +142,7 @@
# define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
+#define CONFIG_MII 1
#define CFG_DISCOVER_PHY
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index a57f7cf..1236ce3 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -83,7 +83,7 @@
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
-/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif /* CONFIG_STK52XX */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 0fad36a..d434eb7 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -280,6 +280,7 @@
#undef CONFIG_EEPRO100
+#define CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/TQM8560.h b/include/configs/TQM8560.h
index 04966d7..d2c230d 100644
--- a/include/configs/TQM8560.h
+++ b/include/configs/TQM8560.h
@@ -283,7 +283,7 @@
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 7e3c11e..ab02dd1 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -100,6 +100,7 @@
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
@@ -108,6 +109,7 @@
#else /* MGT5100 */
+#define CONFIG_MII 1
#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
#endif
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 2d3c0e5..37ef105 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -90,6 +90,7 @@
CFG_CMD_SNTP )
#define CONFIG_NET_MULTI
+#define CONFIG_MII
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index f0c0283..8fad55d 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -98,7 +98,7 @@
/* #define CONFIG_ENV_OVERWRITE 1 */
#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | \
+ ((CONFIG_CMD_DFL | CFG_CMD_MII |\
CFG_CMD_DHCP ) & \
~(CFG_CMD_BDI | \
CFG_CMD_IMI | \
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 3898f91..711e348 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -83,6 +83,8 @@
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
#endif
+
+#define CONFIG_MII
#if 0 /* test-only !!! */
#define CONFIG_NET_MULTI 1
#define CONFIG_EEPRO100 1
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 62b90e8..04d7d8a 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -69,7 +69,7 @@
#define CFG_XLB_PIPELINING 1
#define CONFIG_NET_MULTI 1
-/* #define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index a8edff2..385e6d7 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -83,6 +83,7 @@
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
+#define CONFIG_MII 1
#if 0 /* test-only !!! */
#define CONFIG_NET_MULTI 1
#define CONFIG_EEPRO100 1