dm: cros_ec: Convert cros_ec keyboard driver to driver model
Adjust the cros_ec keyboard driver to support driver model. Make this the
default for all Exynos boards so that those that use a keyboard will build
correctly with this driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/input/cros_ec_keyb.c b/drivers/input/cros_ec_keyb.c
index 09e7cbd..fe5caea 100644
--- a/drivers/input/cros_ec_keyb.c
+++ b/drivers/input/cros_ec_keyb.c
@@ -8,9 +8,11 @@
#include <common.h>
#include <cros_ec.h>
+#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <input.h>
+#include <keyboard.h>
#include <key_matrix.h>
#include <stdio_dev.h>
@@ -22,31 +24,29 @@
KBC_REPEAT_DELAY_MS = 240,
};
-static struct keyb {
- struct cros_ec_dev *dev; /* The CROS_EC device */
- struct input_config input; /* The input layer */
+struct cros_ec_keyb_priv {
+ struct input_config *input; /* The input layer */
struct key_matrix matrix; /* The key matrix layer */
int key_rows; /* Number of keyboard rows */
int key_cols; /* Number of keyboard columns */
int ghost_filter; /* 1 to enable ghost filter, else 0 */
- int inited; /* 1 if keyboard is ready */
-} config;
+};
/**
* Check the keyboard controller and return a list of key matrix positions
* for which a key is pressed
*
- * @param config Keyboard config
+ * @param dev Keyboard device
* @param keys List of keys that we have detected
* @param max_count Maximum number of keys to return
* @param samep Set to true if this scan repeats the last, else false
* @return number of pressed keys, 0 for none, -EIO on error
*/
-static int check_for_keys(struct keyb *config,
- struct key_matrix_key *keys, int max_count,
- bool *samep)
+static int check_for_keys(struct udevice *dev, struct key_matrix_key *keys,
+ int max_count, bool *samep)
{
+ struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
struct key_matrix_key *key;
static struct mbkp_keyscan last_scan;
static bool last_scan_valid;
@@ -54,7 +54,7 @@
unsigned int row, col, bit, data;
int num_keys;
- if (cros_ec_scan_keyboard(config->dev->dev, &scan)) {
+ if (cros_ec_scan_keyboard(dev->parent, &scan)) {
debug("%s: keyboard scan failed\n", __func__);
return -EIO;
}
@@ -69,9 +69,9 @@
last_scan_valid = true;
memcpy(&last_scan, &scan, sizeof(last_scan));
- for (col = num_keys = bit = 0; col < config->matrix.num_cols;
+ for (col = num_keys = bit = 0; col < priv->matrix.num_cols;
col++) {
- for (row = 0; row < config->matrix.num_rows; row++) {
+ for (row = 0; row < priv->matrix.num_rows; row++) {
unsigned int mask = 1 << (bit & 7);
data = scan.data[bit / 8];
@@ -89,28 +89,6 @@
}
/**
- * Test if keys are available to be read
- *
- * @return 0 if no keys available, 1 if keys are available
- */
-static int kbd_tstc(struct stdio_dev *dev)
-{
- /* Just get input to do this for us */
- return config.inited ? input_tstc(&config.input) : 0;
-}
-
-/**
- * Read a key
- *
- * @return ASCII key code, or 0 if no key, or -1 if error
- */
-static int kbd_getc(struct stdio_dev *dev)
-{
- /* Just get input to do this for us */
- return config.inited ? input_getc(&config.input) : 0;
-}
-
-/**
* Check the keyboard, and send any keys that are pressed.
*
* This is called by input_tstc() and input_getc() when they need more
@@ -121,6 +99,8 @@
*/
int cros_ec_kbc_check(struct input_config *input)
{
+ struct udevice *dev = input->dev;
+ struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
static struct key_matrix_key last_keys[KBC_MAX_KEYS];
static int last_num_keys;
struct key_matrix_key keys[KBC_MAX_KEYS];
@@ -139,9 +119,9 @@
* may return 0 before all keys have been read from the EC.
*/
do {
- irq_pending = cros_ec_interrupt_pending(config.dev->dev);
+ irq_pending = cros_ec_interrupt_pending(dev->parent);
if (irq_pending) {
- num_keys = check_for_keys(&config, keys, KBC_MAX_KEYS,
+ num_keys = check_for_keys(dev, keys, KBC_MAX_KEYS,
&same);
if (num_keys < 0)
return 0;
@@ -158,7 +138,7 @@
if (num_keys < 0)
return -1;
- num_keycodes = key_matrix_decode(&config.matrix, keys,
+ num_keycodes = key_matrix_decode(&priv->matrix, keys,
num_keys, keycodes, KBC_MAX_KEYS);
sent = input_send_keycodes(input, keycodes, num_keycodes);
@@ -182,7 +162,7 @@
* @return 0 if ok, -1 on error
*/
static int cros_ec_keyb_decode_fdt(const void *blob, int node,
- struct keyb *config)
+ struct cros_ec_keyb_priv *config)
{
/*
* Get keyboard rows and columns - at present we are limited to
@@ -202,68 +182,56 @@
return 0;
}
-/**
- * Set up the keyboard. This is called by the stdio device handler.
- *
- * We want to do this init when the keyboard is actually used rather than
- * at start-up, since keyboard input may not currently be selected.
- *
- * @return 0 if ok, -1 on error
- */
-static int cros_ec_init_keyboard(struct stdio_dev *dev)
+static int cros_ec_kbd_probe(struct udevice *dev)
{
+ struct cros_ec_keyb_priv *priv = dev_get_priv(dev);
+ struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct stdio_dev *sdev = &uc_priv->sdev;
+ struct input_config *input = &uc_priv->input;
const void *blob = gd->fdt_blob;
- int node;
+ int node = dev->of_offset;
+ int ret;
- config.dev = board_get_cros_ec_dev();
- if (!config.dev) {
- debug("%s: no cros_ec device: cannot init keyboard\n",
- __func__);
+ if (cros_ec_keyb_decode_fdt(blob, node, priv))
return -1;
- }
- node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC_KEYB);
- if (node < 0) {
- debug("%s: Node not found\n", __func__);
- return -1;
- }
- if (cros_ec_keyb_decode_fdt(blob, node, &config))
- return -1;
- input_set_delays(&config.input, KBC_REPEAT_DELAY_MS,
- KBC_REPEAT_RATE_MS);
- if (key_matrix_init(&config.matrix, config.key_rows,
- config.key_cols, config.ghost_filter)) {
+ input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);
+ ret = key_matrix_init(&priv->matrix, priv->key_rows, priv->key_cols,
+ priv->ghost_filter);
+ if (ret) {
debug("%s: cannot init key matrix\n", __func__);
- return -1;
+ return ret;
}
- if (key_matrix_decode_fdt(&config.matrix, gd->fdt_blob, node)) {
+ ret = key_matrix_decode_fdt(&priv->matrix, gd->fdt_blob, node);
+ if (ret) {
debug("%s: Could not decode key matrix from fdt\n", __func__);
- return -1;
+ return ret;
}
- config.inited = 1;
- debug("%s: Matrix keyboard %dx%d ready\n", __func__, config.key_rows,
- config.key_cols);
+ debug("%s: Matrix keyboard %dx%d ready\n", __func__, priv->key_rows,
+ priv->key_cols);
- return 0;
-}
+ priv->input = input;
+ input->dev = dev;
+ input_add_tables(input);
+ input->read_keys = cros_ec_kbc_check;
+ strcpy(sdev->name, "cros-ec-keyb");
-int drv_keyboard_init(void)
-{
- struct stdio_dev dev;
+ /* Register the device. cros_ec_init_keyboard() will be called soon */
+ return input_stdio_register(sdev);
+}
- if (input_init(&config.input, 0)) {
- debug("%s: Cannot set up input\n", __func__);
- return -1;
- }
- config.input.read_keys = cros_ec_kbc_check;
- input_add_tables(&config.input);
+static const struct keyboard_ops cros_ec_kbd_ops = {
+};
- memset(&dev, '\0', sizeof(dev));
- strcpy(dev.name, "cros-ec-keyb");
- dev.flags = DEV_FLAGS_INPUT;
- dev.getc = kbd_getc;
- dev.tstc = kbd_tstc;
- dev.start = cros_ec_init_keyboard;
+static const struct udevice_id cros_ec_kbd_ids[] = {
+ { .compatible = "google,cros-ec-keyb" },
+ { }
+};
- /* Register the device. cros_ec_init_keyboard() will be called soon */
- return input_stdio_register(&dev);
-}
+U_BOOT_DRIVER(cros_ec_kbd) = {
+ .name = "cros_ec_kbd",
+ .id = UCLASS_KEYBOARD,
+ .of_match = cros_ec_kbd_ids,
+ .probe = cros_ec_kbd_probe,
+ .ops = &cros_ec_kbd_ops,
+ .priv_auto_alloc_size = sizeof(struct cros_ec_keyb_priv),
+};