Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
diff --git a/drivers/lan91c96.h b/drivers/lan91c96.h
new file mode 100644
index 0000000..3ac58bc
--- /dev/null
+++ b/drivers/lan91c96.h
@@ -0,0 +1,635 @@
+/*------------------------------------------------------------------------
+ * lan91c96.h
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Rolf Offermanns <rof@sysgo.de>
+ * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ * Developed by Simple Network Magic Corporation (SNMC)
+ * Copyright (C) 1996 by Erik Stahlman (ES)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This file contains register information and access macros for
+ * the LAN91C96 single chip ethernet controller. It is a modified
+ * version of the smc9111.h file.
+ *
+ * Information contained in this file was obtained from the LAN91C96
+ * manual from SMC. To get a copy, if you really want one, you can find
+ * information under www.smsc.com.
+ *
+ * Authors
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
+ *
+ * History
+ * 04/30/03 Mathijs Haarman Modified smc91111.h (u-boot version)
+ * for lan91c96
+ *-------------------------------------------------------------------------
+ */
+#ifndef _LAN91C96_H_
+#define _LAN91C96_H_
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <config.h>
+
+/*
+ * This function may be called by the board specific initialisation code
+ * in order to override the default mac address.
+ */
+
+void smc_set_mac_addr(const char *addr);
+int eth_hw_init(void);
+
+
+/* I want some simple types */
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+
+/*
+ * DEBUGGING LEVELS
+ *
+ * 0 for normal operation
+ * 1 for slightly more details
+ * >2 for various levels of increasingly useless information
+ * 2 for interrupt tracking, status flags
+ * 3 for packet info
+ * 4 for complete packet dumps
+ */
+/*#define SMC_DEBUG 0 */
+
+/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
+
+#define SMC_IO_EXTENT 16
+
+#ifdef CONFIG_PXA250
+
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+( r * 4 ))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+( r * 4 ))))
+#define SMC_inb(p) ({ \
+ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p * 4)); \
+ unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
+ if (__p & 1) __v >>= 8; \
+ else __v &= 0xff; \
+ __v; })
+
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r * 4))) = d)
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r * 4))) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+
+#define SMC_outsl(r,b,l) ({ int __i; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outl( *(__b2 + __i), r ); \
+ } \
+ })
+
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r ); \
+ } \
+ })
+
+#define SMC_insl(r,b,l) ({ int __i ; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inl(r); \
+ SMC_inl(0); \
+ }; \
+ })
+
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+
+#define SMC_insb(r,b,l) ({ int __i ; \
+ byte *__b2; \
+ __b2 = (byte *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inb(r); \
+ SMC_inb(0); \
+ }; \
+ })
+
+#else /* if not CONFIG_PXA250 */
+
+/*
+ * We have only 16 Bit PCMCIA access on Socket 0
+ */
+
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
+
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+#if 0
+#define SMC_outsw(r,b,l) outsw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r); \
+ } \
+ })
+#endif
+
+#if 0
+#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+#endif
+
+#endif
+
+/*
+ ****************************************************************************
+ * Bank Select Field
+ ****************************************************************************
+ */
+#define LAN91C96_BANK_SELECT 14 // Bank Select Register
+#define LAN91C96_BANKSELECT (0x3UC << 0)
+#define BANK0 0x00
+#define BANK1 0x01
+#define BANK2 0x02
+#define BANK3 0x03
+#define BANK4 0x04
+
+/*
+ ****************************************************************************
+ * EEPROM Addresses.
+ ****************************************************************************
+ */
+#define EEPROM_MAC_OFFSET_1 0x6020
+#define EEPROM_MAC_OFFSET_2 0x6021
+#define EEPROM_MAC_OFFSET_3 0x6022
+
+/*
+ ****************************************************************************
+ * Bank 0 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_TCR 0 // Transmit Control Register
+#define LAN91C96_EPH_STATUS 2 // EPH Status Register
+#define LAN91C96_RCR 4 // Receive Control Register
+#define LAN91C96_COUNTER 6 // Counter Register
+#define LAN91C96_MIR 8 // Memory Information Register
+#define LAN91C96_MCR 10 // Memory Configuration Register
+
+/*
+ ****************************************************************************
+ * Transmit Control Register - Bank 0 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_TCR_TXENA (0x1U << 0)
+#define LAN91C96_TCR_LOOP (0x1U << 1)
+#define LAN91C96_TCR_FORCOL (0x1U << 2)
+#define LAN91C96_TCR_TXP_EN (0x1U << 3)
+#define LAN91C96_TCR_PAD_EN (0x1U << 7)
+#define LAN91C96_TCR_NOCRC (0x1U << 8)
+#define LAN91C96_TCR_MON_CSN (0x1U << 10)
+#define LAN91C96_TCR_FDUPLX (0x1U << 11)
+#define LAN91C96_TCR_STP_SQET (0x1U << 12)
+#define LAN91C96_TCR_EPH_LOOP (0x1U << 13)
+#define LAN91C96_TCR_ETEN_TYPE (0x1U << 14)
+#define LAN91C96_TCR_FDSE (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * EPH Status Register - Bank 0 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_EPHSR_TX_SUC (0x1U << 0)
+#define LAN91C96_EPHSR_SNGL_COL (0x1U << 1)
+#define LAN91C96_EPHSR_MUL_COL (0x1U << 2)
+#define LAN91C96_EPHSR_LTX_MULT (0x1U << 3)
+#define LAN91C96_EPHSR_16COL (0x1U << 4)
+#define LAN91C96_EPHSR_SQET (0x1U << 5)
+#define LAN91C96_EPHSR_LTX_BRD (0x1U << 6)
+#define LAN91C96_EPHSR_TX_DEFR (0x1U << 7)
+#define LAN91C96_EPHSR_WAKEUP (0x1U << 8)
+#define LAN91C96_EPHSR_LATCOL (0x1U << 9)
+#define LAN91C96_EPHSR_LOST_CARR (0x1U << 10)
+#define LAN91C96_EPHSR_EXC_DEF (0x1U << 11)
+#define LAN91C96_EPHSR_CTR_ROL (0x1U << 12)
+
+#define LAN91C96_EPHSR_LINK_OK (0x1U << 14)
+#define LAN91C96_EPHSR_TX_UNRN (0x1U << 15)
+
+#define LAN91C96_EPHSR_ERRORS (LAN91C96_EPHSR_SNGL_COL | \
+ LAN91C96_EPHSR_MUL_COL | \
+ LAN91C96_EPHSR_16COL | \
+ LAN91C96_EPHSR_SQET | \
+ LAN91C96_EPHSR_TX_DEFR | \
+ LAN91C96_EPHSR_LATCOL | \
+ LAN91C96_EPHSR_LOST_CARR | \
+ LAN91C96_EPHSR_EXC_DEF | \
+ LAN91C96_EPHSR_LINK_OK | \
+ LAN91C96_EPHSR_TX_UNRN)
+
+/*
+ ****************************************************************************
+ * Receive Control Register - Bank 0 - Offset 4
+ ****************************************************************************
+ */
+#define LAN91C96_RCR_RX_ABORT (0x1U << 0)
+#define LAN91C96_RCR_PRMS (0x1U << 1)
+#define LAN91C96_RCR_ALMUL (0x1U << 2)
+#define LAN91C96_RCR_RXEN (0x1U << 8)
+#define LAN91C96_RCR_STRIP_CRC (0x1U << 9)
+#define LAN91C96_RCR_FILT_CAR (0x1U << 14)
+#define LAN91C96_RCR_SOFT_RST (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * Counter Register - Bank 0 - Offset 6
+ ****************************************************************************
+ */
+#define LAN91C96_ECR_SNGL_COL (0xFU << 0)
+#define LAN91C96_ECR_MULT_COL (0xFU << 5)
+#define LAN91C96_ECR_DEF_TX (0xFU << 8)
+#define LAN91C96_ECR_EXC_DEF_TX (0xFU << 12)
+
+/*
+ ****************************************************************************
+ * Memory Information Register - Bank 0 - OFfset 8
+ ****************************************************************************
+ */
+#define LAN91C96_MIR_SIZE (0x18 << 0) // 6144 bytes
+
+/*
+ ****************************************************************************
+ * Memory Configuration Register - Bank 0 - Offset 10
+ ****************************************************************************
+ */
+#define LAN91C96_MCR_MEM_RES (0xFFU << 0)
+#define LAN91C96_MCR_MEM_MULT (0x3U << 9)
+#define LAN91C96_MCR_HIGH_ID (0x3U << 12)
+
+#define LAN91C96_MCR_TRANSMIT_PAGES 0x6
+
+/*
+ ****************************************************************************
+ * Bank 1 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_CONFIG 0 // Configuration Register
+#define LAN91C96_BASE 2 // Base Address Register
+#define LAN91C96_IA0 4 // Individual Address Register - 0
+#define LAN91C96_IA1 5 // Individual Address Register - 1
+#define LAN91C96_IA2 6 // Individual Address Register - 2
+#define LAN91C96_IA3 7 // Individual Address Register - 3
+#define LAN91C96_IA4 8 // Individual Address Register - 4
+#define LAN91C96_IA5 9 // Individual Address Register - 5
+#define LAN91C96_GEN_PURPOSE 10 // General Address Registers
+#define LAN91C96_CONTROL 12 // Control Register
+
+/*
+ ****************************************************************************
+ * Configuration Register - Bank 1 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_CR_INT_SEL0 (0x1U << 1)
+#define LAN91C96_CR_INT_SEL1 (0x1U << 2)
+#define LAN91C96_CR_RES (0x3U << 3)
+#define LAN91C96_CR_DIS_LINK (0x1U << 6)
+#define LAN91C96_CR_16BIT (0x1U << 7)
+#define LAN91C96_CR_AUI_SELECT (0x1U << 8)
+#define LAN91C96_CR_SET_SQLCH (0x1U << 9)
+#define LAN91C96_CR_FULL_STEP (0x1U << 10)
+#define LAN91C96_CR_NO_WAIT (0x1U << 12)
+
+/*
+ ****************************************************************************
+ * Base Address Register - Bank 1 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_BAR_RA_BITS (0x27U << 0)
+#define LAN91C96_BAR_ROM_SIZE (0x1U << 6)
+#define LAN91C96_BAR_A_BITS (0xFFU << 8)
+
+/*
+ ****************************************************************************
+ * Control Register - Bank 1 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_CTR_STORE (0x1U << 0)
+#define LAN91C96_CTR_RELOAD (0x1U << 1)
+#define LAN91C96_CTR_EEPROM (0x1U << 2)
+#define LAN91C96_CTR_TE_ENABLE (0x1U << 5)
+#define LAN91C96_CTR_CR_ENABLE (0x1U << 6)
+#define LAN91C96_CTR_LE_ENABLE (0x1U << 7)
+#define LAN91C96_CTR_BIT_8 (0x1U << 8)
+#define LAN91C96_CTR_AUTO_RELEASE (0x1U << 11)
+#define LAN91C96_CTR_WAKEUP_EN (0x1U << 12)
+#define LAN91C96_CTR_PWRDN (0x1U << 13)
+#define LAN91C96_CTR_RCV_BAD (0x1U << 14)
+
+/*
+ ****************************************************************************
+ * Bank 2 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_MMU 0 // MMU Command Register
+#define LAN91C96_AUTO_TX_START 1 // Auto Tx Start Register
+#define LAN91C96_PNR 2 // Packet Number Register
+#define LAN91C96_ARR 3 // Allocation Result Register
+#define LAN91C96_FIFO 4 // FIFO Ports Register
+#define LAN91C96_POINTER 6 // Pointer Register
+#define LAN91C96_DATA_HIGH 8 // Data High Register
+#define LAN91C96_DATA_LOW 10 // Data Low Register
+#define LAN91C96_INT_STATS 12 // Interrupt Status Register - RO
+#define LAN91C96_INT_ACK 12 // Interrupt Acknowledge Register -WO
+#define LAN91C96_INT_MASK 13 // Interrupt Mask Register
+
+/*
+ ****************************************************************************
+ * MMU Command Register - Bank 2 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_MMUCR_NO_BUSY (0x1U << 0)
+#define LAN91C96_MMUCR_N1 (0x1U << 1)
+#define LAN91C96_MMUCR_N2 (0x1U << 2)
+#define LAN91C96_MMUCR_COMMAND (0xFU << 4)
+#define LAN91C96_MMUCR_ALLOC_TX (0x2U << 4) // WXYZ = 0010
+#define LAN91C96_MMUCR_RESET_MMU (0x4U << 4) // WXYZ = 0100
+#define LAN91C96_MMUCR_REMOVE_RX (0x6U << 4) // WXYZ = 0110
+#define LAN91C96_MMUCR_REMOVE_TX (0x7U << 4) // WXYZ = 0111
+#define LAN91C96_MMUCR_RELEASE_RX (0x8U << 4) // WXYZ = 1000
+#define LAN91C96_MMUCR_RELEASE_TX (0xAU << 4) // WXYZ = 1010
+#define LAN91C96_MMUCR_ENQUEUE (0xCU << 4) // WXYZ = 1100
+#define LAN91C96_MMUCR_RESET_TX (0xEU << 4) // WXYZ = 1110
+
+/*
+ ****************************************************************************
+ * Auto Tx Start Register - Bank 2 - Offset 1
+ ****************************************************************************
+ */
+#define LAN91C96_AUTOTX (0xFFU << 0)
+
+/*
+ ****************************************************************************
+ * Packet Number Register - Bank 2 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_PNR_TX (0x1FU << 0)
+
+/*
+ ****************************************************************************
+ * Allocation Result Register - Bank 2 - Offset 3
+ ****************************************************************************
+ */
+#define LAN91C96_ARR_ALLOC_PN (0x7FU << 0)
+#define LAN91C96_ARR_FAILED (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * FIFO Ports Register - Bank 2 - Offset 4
+ ****************************************************************************
+ */
+#define LAN91C96_FIFO_TX_DONE_PN (0x1FU << 0)
+#define LAN91C96_FIFO_TEMPTY (0x1U << 7)
+#define LAN91C96_FIFO_RX_DONE_PN (0x1FU << 8)
+#define LAN91C96_FIFO_RXEMPTY (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * Pointer Register - Bank 2 - Offset 6
+ ****************************************************************************
+ */
+#define LAN91C96_PTR_LOW (0xFFU << 0)
+#define LAN91C96_PTR_HIGH (0x7U << 8)
+#define LAN91C96_PTR_AUTO_TX (0x1U << 11)
+#define LAN91C96_PTR_ETEN (0x1U << 12)
+#define LAN91C96_PTR_READ (0x1U << 13)
+#define LAN91C96_PTR_AUTO_INCR (0x1U << 14)
+#define LAN91C96_PTR_RCV (0x1U << 15)
+
+#define LAN91C96_PTR_RX_FRAME (LAN91C96_PTR_RCV | \
+ LAN91C96_PTR_AUTO_INCR | \
+ LAN91C96_PTR_READ)
+
+/*
+ ****************************************************************************
+ * Data Register - Bank 2 - Offset 8
+ ****************************************************************************
+ */
+#define LAN91C96_CONTROL_CRC (0x1U << 4) // CRC bit
+#define LAN91C96_CONTROL_ODD (0x1U << 5) // ODD bit
+
+/*
+ ****************************************************************************
+ * Interrupt Status Register - Bank 2 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_IST_RCV_INT (0x1U << 0)
+#define LAN91C96_IST_TX_INT (0x1U << 1)
+#define LAN91C96_IST_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_IST_ALLOC_INT (0x1U << 3)
+#define LAN91C96_IST_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_IST_EPH_INT (0x1U << 5)
+#define LAN91C96_IST_ERCV_INT (0x1U << 6)
+#define LAN91C96_IST_RX_IDLE_INT (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * Interrupt Acknowledge Register - Bank 2 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_ACK_TX_INT (0x1U << 1)
+#define LAN91C96_ACK_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_ACK_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_ACK_ERCV_INT (0x1U << 6)
+
+/*
+ ****************************************************************************
+ * Interrupt Mask Register - Bank 2 - Offset 13
+ ****************************************************************************
+ */
+#define LAN91C96_MSK_RCV_INT (0x1U << 0)
+#define LAN91C96_MSK_TX_INT (0x1U << 1)
+#define LAN91C96_MSK_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_MSK_ALLOC_INT (0x1U << 3)
+#define LAN91C96_MSK_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_MSK_EPH_INT (0x1U << 5)
+#define LAN91C96_MSK_ERCV_INT (0x1U << 6)
+#define LAN91C96_MSK_TX_IDLE_INT (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * Bank 3 Register Map in I/O Space
+ **************************************************************************
+ */
+#define LAN91C96_MGMT_MDO (0x1U << 0)
+#define LAN91C96_MGMT_MDI (0x1U << 1)
+#define LAN91C96_MGMT_MCLK (0x1U << 2)
+#define LAN91C96_MGMT_MDOE (0x1U << 3)
+#define LAN91C96_MGMT_LOW_ID (0x3U << 4)
+#define LAN91C96_MGMT_IOS0 (0x1U << 8)
+#define LAN91C96_MGMT_IOS1 (0x1U << 9)
+#define LAN91C96_MGMT_IOS2 (0x1U << 10)
+#define LAN91C96_MGMT_nXNDEC (0x1U << 11)
+#define LAN91C96_MGMT_HIGH_ID (0x3U << 12)
+
+/*
+ ****************************************************************************
+ * Revision Register - Bank 3 - Offset 10
+ ****************************************************************************
+ */
+#define LAN91C96_REV_REVID (0xFU << 0)
+#define LAN91C96_REV_CHIPID (0xFU << 4)
+
+/*
+ ****************************************************************************
+ * Early RCV Register - Bank 3 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_ERCV_THRESHOLD (0x1FU << 0)
+#define LAN91C96_ERCV_RCV_DISCRD (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * PCMCIA Configuration Registers
+ ****************************************************************************
+ */
+#define LAN91C96_ECOR 0x8000 // Ethernet Configuration Register
+#define LAN91C96_ECSR 0x8002 // Ethernet Configuration and Status
+
+/*
+ ****************************************************************************
+ * PCMCIA Ethernet Configuration Option Register (ECOR)
+ ****************************************************************************
+ */
+#define LAN91C96_ECOR_ENABLE (0x1U << 0)
+#define LAN91C96_ECOR_WR_ATTRIB (0x1U << 2)
+#define LAN91C96_ECOR_LEVEL_REQ (0x1U << 6)
+#define LAN91C96_ECOR_SRESET (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * PCMCIA Ethernet Configuration and Status Register (ECSR)
+ ****************************************************************************
+ */
+#define LAN91C96_ECSR_INTR (0x1U << 1)
+#define LAN91C96_ECSR_PWRDWN (0x1U << 2)
+#define LAN91C96_ECSR_IOIS8 (0x1U << 5)
+
+/*
+ ****************************************************************************
+ * Receive Frame Status Word - See page 38 of the LAN91C96 specification.
+ ****************************************************************************
+ */
+#define LAN91C96_TOO_SHORT (0x1U << 10)
+#define LAN91C96_TOO_LONG (0x1U << 11)
+#define LAN91C96_ODD_FRM (0x1U << 12)
+#define LAN91C96_BAD_CRC (0x1U << 13)
+#define LAN91C96_BROD_CAST (0x1U << 14)
+#define LAN91C96_ALGN_ERR (0x1U << 15)
+
+#define FRAME_FILTER (LAN91C96_TOO_SHORT | LAN91C96_TOO_LONG | LAN91C96_BAD_CRC | LAN91C96_ALGN_ERR)
+
+/*
+ ****************************************************************************
+ * Default MAC Address
+ ****************************************************************************
+ */
+#define MAC_DEF_HI 0x0800
+#define MAC_DEF_MED 0x3333
+#define MAC_DEF_LO 0x0100
+
+/*
+ ****************************************************************************
+ * Default I/O Signature - 0x33
+ ****************************************************************************
+ */
+#define LAN91C96_LOW_SIGNATURE (0x33U << 0)
+#define LAN91C96_HIGH_SIGNATURE (0x33U << 8)
+#define LAN91C96_SIGNATURE (LAN91C96_HIGH_SIGNATURE | LAN91C96_LOW_SIGNATURE)
+
+#define LAN91C96_MAX_PAGES 6 // Maximum number of 256 pages.
+#define ETHERNET_MAX_LENGTH 1514
+
+
+
+/*-------------------------------------------------------------------------
+ * I define some macros to make it easier to do somewhat common
+ * or slightly complicated, repeated tasks.
+ *-------------------------------------------------------------------------
+ */
+
+/* select a register bank, 0 to 3 */
+
+#define SMC_SELECT_BANK(x) { SMC_outw( x, LAN91C96_BANK_SELECT ); }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( LAN91C96_INT_MASK );\
+ mask |= (x);\
+ SMC_outb( mask, LAN91C96_INT_MASK ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( LAN91C96_INT_MASK );\
+ mask &= ~(x);\
+ SMC_outb( mask, LAN91C96_INT_MASK ); \
+}
+
+/*----------------------------------------------------------------------
+ * Define the interrupts that I want to receive from the card
+ *
+ * I want:
+ * LAN91C96_IST_EPH_INT, for nasty errors
+ * LAN91C96_IST_RCV_INT, for happy received packets
+ * LAN91C96_IST_RX_OVRN_INT, because I have to kick the receiver
+ *-------------------------------------------------------------------------
+ */
+#define SMC_INTERRUPT_MASK (LAN91C96_IST_EPH_INT | LAN91C96_IST_RX_OVRN_INT | LAN91C96_IST_RCV_INT)
+
+#endif /* _LAN91C96_H_ */