arm: mvebu: Add Marvell's integrated CPUs
Marvell's switch chips with integrated CPUs (collectively referred to as
MSYS) share common ancestry with the Armada SoCs. Some of the IP blocks
(e.g. xor) are located at different addresses and DFX server exists as a
separate target on the MBUS (on Armada-38x it's just part of the core
complex registers).
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 5d3f553..9868462 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -23,6 +23,11 @@
/* NOR */
{ MBUS_BOOTROM_BASE, MBUS_BOOTROM_SIZE,
CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_BOOTROM },
+
+#ifdef CONFIG_ARMADA_MSYS
+ /* DFX */
+ { MBUS_DFX_BASE, MBUS_DFX_SIZE, CPU_TARGET_DFX, 0 },
+#endif
};
void lowlevel_init(void)
@@ -121,6 +126,14 @@
{ 0x13, 0x0, 2000, 1000, 933 },
{ 0xff, 0xff, 0, 0, 0 } /* 0xff marks end of array */
};
+#elif defined(CONFIG_ARMADA_MSYS)
+static const struct sar_freq_modes sar_freq_tab[] = {
+ { 0x0, 0x0, 400, 400, 400 },
+ { 0x2, 0x0, 667, 333, 667 },
+ { 0x3, 0x0, 800, 400, 800 },
+ { 0x5, 0x0, 800, 400, 800 },
+ { 0xff, 0xff, 0, 0, 0 } /* 0xff marks end of array */
+};
#else
/* SAR frequency values for Armada XP */
static const struct sar_freq_modes sar_freq_tab[] = {
@@ -144,7 +157,7 @@
u32 freq;
int i;
-#if defined(CONFIG_ARMADA_375)
+#if defined(CONFIG_ARMADA_375) || defined(CONFIG_ARMADA_MSYS)
val = readl(CONFIG_SAR2_REG); /* SAR - Sample At Reset */
#else
val = readl(CONFIG_SAR_REG); /* SAR - Sample At Reset */
@@ -160,7 +173,7 @@
#endif
for (i = 0; sar_freq_tab[i].val != 0xff; i++) {
if (sar_freq_tab[i].val == freq) {
-#if defined(CONFIG_ARMADA_375) || defined(CONFIG_ARMADA_38X)
+#if defined(CONFIG_ARMADA_375) || defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_MSYS)
*sar_freq = sar_freq_tab[i];
return;
#else
@@ -270,6 +283,20 @@
}
}
+ if (mvebu_soc_family() == MVEBU_SOC_MSYS) {
+ switch (revid) {
+ case 3:
+ puts("A0");
+ break;
+ case 4:
+ puts("A1");
+ break;
+ default:
+ printf("?? (%x)", revid);
+ break;
+ }
+ }
+
get_sar_freq(&sar_freq);
printf(" at %d MHz\n", sar_freq.p_clk);