armv8/ls1043a: fixup GIC offset for ls1043a rev1
The LS1043A rev1.1 silicon supports two types of GIC offset: 4K
alignment and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT]
is used to choose which offset will be used.
The LS1043A rev1.0 silicon only supports the CIG offset with 4K
alignment.
If GIC_ADDR_BIT bit is set, 4K alignment is used, or else 64K alignment
is used. 64K alignment is the default setting.
Overriding the weak smp_kick_all_cpus, the new impletment is able to
detect GIC offset.
The default GIC offset in kernel device tree is using 4K alignment, it
need to be fixed if 64K alignment is detected.
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 04a2598..62efa90 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -10,15 +10,66 @@
#include <linux/linkage.h>
#include <asm/gic.h>
#include <asm/macro.h>
+#include <asm/arch-fsl-layerscape/soc.h>
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
#ifdef CONFIG_FSL_LSCH3
#include <asm/arch-fsl-layerscape/immap_lsch3.h>
-#include <asm/arch-fsl-layerscape/soc.h>
#endif
#include <asm/u-boot.h>
+/* Get GIC offset
+* For LS1043a rev1.0, GIC base address align with 4k.
+* For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
+* is set, GIC base address align with 4K, or else align
+* with 64k.
+* output:
+* x0: the base address of GICD
+* x1: the base address of GICC
+*/
+ENTRY(get_gic_offset)
+ ldr x0, =GICD_BASE
+#ifdef CONFIG_GICV2
+ ldr x1, =GICC_BASE
+#endif
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+ ldr x2, =DCFG_CCSR_SVR
+ ldr w2, [x2]
+ rev w2, w2
+ mov w3, w2
+ ands w3, w3, #SVR_WO_E << 8
+ mov w4, #SVR_LS1043A << 8
+ cmp w3, w4
+ b.ne 1f
+ ands w2, w2, #0xff
+ cmp w2, #REV1_0
+ b.eq 1f
+ ldr x2, =SCFG_GIC400_ALIGN
+ ldr w2, [x2]
+ rev w2, w2
+ tbnz w2, #GIC_ADDR_BIT, 1f
+ ldr x0, =GICD_BASE_64K
+#ifdef CONFIG_GICV2
+ ldr x1, =GICC_BASE_64K
+#endif
+1:
+#endif
+ ret
+ENDPROC(get_gic_offset)
+
+ENTRY(smp_kick_all_cpus)
+ /* Kick secondary cpus up by SGI 0 interrupt */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+ mov x29, lr /* Save LR */
+ bl get_gic_offset
+ bl gic_kick_secondary_cpus
+ mov lr, x29 /* Restore LR */
+#endif
+ ret
+ENDPROC(smp_kick_all_cpus)
+
+
ENTRY(lowlevel_init)
mov x29, lr /* Save LR */
@@ -130,15 +181,14 @@
/* Initialize GIC Secure Bank Status */
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
branch_if_slave x0, 1f
- ldr x0, =GICD_BASE
+ bl get_gic_offset
bl gic_init_secure
1:
#ifdef CONFIG_GICV3
ldr x0, =GICR_BASE
bl gic_init_secure_percpu
#elif defined(CONFIG_GICV2)
- ldr x0, =GICD_BASE
- ldr x1, =GICC_BASE
+ bl get_gic_offset
bl gic_init_secure_percpu
#endif
#endif
@@ -413,7 +463,8 @@
#if defined(CONFIG_GICV3)
gic_wait_for_interrupt_m x0
#elif defined(CONFIG_GICV2)
- ldr x0, =GICC_BASE
+ bl get_gic_offset
+ mov x0, x1
gic_wait_for_interrupt_m x0, w1
#endif