Use common code for Matrix Vision boards
Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by
using common code.
Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index aa91805..80334bd 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -46,10 +46,9 @@
#define CONFIG_MPC8XXX_SPI
#define CONFIG_HARD_SPI
#define MVBLM7_MMC_CS 0x04000000
+#define CONFIG_MISC_INIT_R
/* I2C */
-#undef CONFIG_SOFT_I2C
-
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_OFFSET 0x3000
@@ -61,44 +60,36 @@
/*
* DDR Setup
*/
+#undef CONFIG_SPD_EEPROM
+
#define CONFIG_SYS_DDR_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_83XX_DDR_USES_CS0 1
#define CONFIG_SYS_MEMTEST_START (60<<20)
#define CONFIG_SYS_MEMTEST_END (70<<20)
+#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
- DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_DDRCDR 0x22000001
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-#define CONFIG_SYS_DDR_SIZE 256
+#define CONFIG_SYS_DDR_SIZE 512
-/* HC, 75Ohm, DDR-II, DRQ */
-#define CONFIG_SYS_DDRCDR 0x80000001
-/* EN, ODT_WR, 3BA, 14row, 10col */
-#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014102
-#define CONFIG_SYS_DDR_CS1_CONFIG 0x0
-#define CONFIG_SYS_DDR_CS2_CONFIG 0x0
-#define CONFIG_SYS_DDR_CS3_CONFIG 0x0
+#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202
-#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f
-#define CONFIG_SYS_DDR_CS1_BNDS 0x0
-#define CONFIG_SYS_DDR_CS2_BNDS 0x0
-#define CONFIG_SYS_DDR_CS3_BNDS 0x0
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
-#define CONFIG_SYS_DDR_CLK_CNTL 0x02000000
+#define CONFIG_SYS_DDR_TIMING_0 0x00260802
+#define CONFIG_SYS_DDR_TIMING_1 0x3837c322
+#define CONFIG_SYS_DDR_TIMING_2 0x0f9848c6
+#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-#define CONFIG_SYS_DDR_TIMING_0 0x00260802
-#define CONFIG_SYS_DDR_TIMING_1 0x2625b221
-#define CONFIG_SYS_DDR_TIMING_2 0x1f9820c7
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-
-/* ~MEM_EN, SREN, DDR-II, 32_BE */
-#define CONFIG_SYS_DDR_SDRAM_CFG 0x43080000
+#define CONFIG_SYS_DDR_SDRAM_CFG 0x43080008
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
-#define CONFIG_SYS_DDR_INTERVAL 0x04060100
+#define CONFIG_SYS_DDR_INTERVAL 0x02000100
-#define CONFIG_SYS_DDR_MODE 0x078e0232
+#define CONFIG_SYS_DDR_MODE 0x04040242
+#define CONFIG_SYS_DDR_MODE2 0x00800000
/* Flash */
#define CONFIG_SYS_FLASH_CFI
@@ -404,8 +395,8 @@
#define MV_CI mvBL-M7
#define MV_VCI mvBL-M7
-#define MV_FPGA_DATA 0xfff80000
-#define MV_FPGA_SIZE 0x00076ca2
+#define MV_FPGA_DATA 0xfff40000
+#define MV_FPGA_SIZE 0
#define MV_KERNEL_ADDR 0xff810000
#define MV_INITRD_ADDR 0xffb00000
#define MV_SOURCE_ADDR 0xff804000
@@ -452,7 +443,7 @@
"static_ipaddr=192.168.90.10\0" \
"static_netmask=255.255.255.0\0" \
"static_gateway=0.0.0.0\0" \
- "initrd_name=uInitrd.mvblm7-xenorfs\0" \
+ "initrd_name=uInitrd.mvBL-M7-rfs\0" \
"zcip=no\0" \
"netboot=yes\0" \
"mvtest=Ff\0" \