powerpc: common updates for keymile boards
- added to keymile-common.h:
- bootcount support
- COMMAND HISTORY
- CONFIG_AUTO_COMPLETE
- CONFIG_SYS_FLASH_PROTECTION
- JFFS2 support
- CONFIG_VERSION_VARIABLE
- extracted common I2C settings for all boards
- common default environment settings summarized
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 8f3a420..cc42101 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -86,39 +86,24 @@
"mtdparts=boot:384k(u-boot),128k(env),128k(envred),3456k(free);" \
"app:3m(esw0),10m(rootfs0),3m(esw1),10m(rootfs1),1m(var),5m(cfg)"
+#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */
+#define CONFIG_KM_DEF_ENV "km-common=empty\0"
+#endif
/*
* Default environment settings
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "u-boot_addr=100000\0" \
- "kernel_addr=200000\0" \
- "fdt_addr=400000\0" \
- "rootpath=/opt/eldk-4.2/ppc_82xx\0" \
- "u-boot=/tftpboot/mgcoge/u-boot.bin\0" \
- "bootfile=/tftpboot/mgcoge/uImage\0" \
- "fdt_file=/tftpboot/mgcoge/mgcoge.dtb\0" \
- "load=tftp ${u-boot_addr} ${u-boot}\0" \
- "update=prot off fe000000 fe03ffff; era fe000000 fe03ffff; " \
- "cp.b ${u-boot_addr} fe000000 ${filesize};" \
- "prot on fe000000 fe03ffff\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off panic=1\0" \
- "net_nfs=tftp ${kernel_addr} ${bootfile}; " \
- "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;" \
- "bootm ${kernel_addr} - ${fdt_addr}\0" \
- "net_self=tftp ${kernel_addr} ${bootfile}; " \
- "tftp ${fdt_addr} ${fdt_file}; " \
- "tftp ${ramdisk_addr} ${ramdisk_file}; " \
- "run ramargs addip; " \
- "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "EEprom_ivm=pca9544a:70:4 \0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_KM_DEF_ENV \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ "addcon=setenv bootargs ${bootargs} " \
+ "console=ttyCPM0,${baudrate}\0" \
+ "mtdids=nor0=boot,nor1=app \0" \
+ "mtdparts=mtdparts=boot:384k(u-boot),128k(env),128k(envred)," \
+ "3456k(free);app:3m(esw0),10m(rootfs0),3m(esw1)," \
+ "10m(rootfs1),1m(var),5m(cfg) \0" \
+ "partition=nor1,5 \0" \
+ "new_env=prot off FE060000 FE09FFFF; era FE060000 FE09FFFF \0" \
+ "EEprom_ivm=pca9544a:70:4 \0" \
"mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0" \
""
@@ -140,7 +125,7 @@
#define CONFIG_SYS_RAMBOOT
#endif
-#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */
#define CONFIG_ENV_IS_IN_FLASH
@@ -175,24 +160,6 @@
else iop->pdat &= ~0x00020000
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_I2C_CMD_TREE 1
-#define CONFIG_SYS_MAX_I2C_BUS 2
-#define CONFIG_SYS_I2C_INIT_BOARD 1
-#define CONFIG_I2C_MUX 1
-
-/* EEprom support */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* Support the IVM EEprom */
-#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
-#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
-#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
-
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */