arm64: imx: Add support for imx8mp-beacon-kit
Beacon Embedded has an i.MX8M Plus development kit which consists
of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC,
and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
PHY. The device trees are already queued for inclusion in Linux 6.3.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi
new file mode 100644
index 0000000..5ca631e
--- /dev/null
+++ b/arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 Logic PD, Inc DBA Beacon EmbeddedWorks
+ */
+
+#include "imx8mp-u-boot.dtsi"
+
+/ {
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ bootph-pre-ram;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25} {
+ bootph-pre-ram;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
+ bootph-pre-ram;
+};
+
+&crypto {
+ bootph-pre-ram;
+};
+
+&eqos {
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+ /delete-property/ assigned-clock-rates;
+};
+
+ðphy0 {
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <15000>;
+ reset-deassert-us = <100000>;
+};
+
+&fec {
+ phy-reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <15>;
+ phy-reset-post-delay = <100>;
+};
+
+&flexspi {
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
+};
+
+&gpio1 {
+ bootph-pre-ram;
+};
+
+&gpio2 {
+ bootph-pre-ram;
+};
+
+&gpio3 {
+ bootph-pre-ram;
+};
+
+&gpio4 {
+ bootph-pre-ram;
+};
+
+&gpio5 {
+ bootph-pre-ram;
+};
+
+&i2c1 {
+ bootph-pre-ram;
+};
+
+&i2c2 {
+ bootph-pre-ram;
+};
+
+&i2c3 {
+ bootph-pre-ram;
+};
+
+&pca6416 {
+ compatible = "ti,tca6416";
+ label = "exp4";
+};
+
+&pca6416_1 {
+ compatible = "ti,tca6416";
+ label = "exp4";
+};
+
+&pca6416_3 {
+ compatible = "ti,tca6416";
+ label = "exp2";
+};
+
+&pinctrl_i2c1 {
+ bootph-pre-ram;
+};
+
+&pinctrl_pmic {
+ bootph-pre-ram;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+ bootph-pre-ram;
+};
+
+&pinctrl_uart2 {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2_gpio {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2 {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc3 {
+ bootph-pre-ram;
+};
+
+&pinctrl_wdog {
+ bootph-pre-ram;
+};
+
+®_usdhc2_vmmc {
+ bootph-pre-ram;
+ u-boot,off-on-delay-us = <20000>;
+};
+
+&sec_jr0 {
+ bootph-pre-ram;
+};
+
+&sec_jr1 {
+ bootph-pre-ram;
+};
+
+&sec_jr2 {
+ bootph-pre-ram;
+};
+
+&tpm {
+ compatible = "tcg,tpm_tis-spi";
+};
+
+&uart2 {
+ bootph-pre-ram;
+};
+
+&usdhc1 {
+ bootph-pre-ram;
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
+};
+
+&usdhc2 {
+ bootph-pre-ram;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <400000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
+};
+
+&usdhc3 {
+ bootph-pre-ram;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>;
+};
+
+&usb3_0 {
+ dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+ /delete-property/ power-domains;
+};
+
+&usb3_1 {
+ dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+ /delete-property/ power-domains;
+};
+
+&usb_dwc3_0 {
+ compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+ assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <400000000>;
+};
+
+&usb_dwc3_1 {
+ compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+ assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <400000000>;
+};
+
+&usdhc1 {
+ status = "disabled";
+};
+
+&wdog1 {
+ bootph-pre-ram;
+};