imx6sx: synchronise device tree with linux
Synchronise device tree with linux v6.0-rc1.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/arch/arm/dts/imx6sx-sabreauto.dts b/arch/arm/dts/imx6sx-sabreauto.dts
index 9643d1f..83ee972 100644
--- a/arch/arm/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/dts/imx6sx-sabreauto.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -14,29 +10,171 @@
model = "Freescale i.MX6 SoloX Sabre Auto Board";
compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
- memory {
+ memory@80000000 {
+ device_type = "memory";
reg = <0x80000000 0x80000000>;
};
- regulators {
- compatible = "simple-bus";
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_sd3: regulator-vcc-sd3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_wake: regulator-can-wake {
+ compatible = "regulator-fixed";
+ regulator-name = "can-wake";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_wake>;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
+ };
+
+ reg_cs42888: cs42888_supply {
+ compatible = "regulator-fixed";
+ regulator-name = "cs42888_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound-cs42888 {
+ compatible = "fsl,imx6-sabreauto-cs42888",
+ "fsl,imx-audio-cs42888";
+ model = "imx-cs42888";
+ audio-cpu = <&esai>;
+ audio-asrc = <&asrc>;
+ audio-codec = <&cs42888>;
+ audio-routing =
+ "Line Out Jack", "AOUT1L",
+ "Line Out Jack", "AOUT1R",
+ "Line Out Jack", "AOUT2L",
+ "Line Out Jack", "AOUT2R",
+ "Line Out Jack", "AOUT3L",
+ "Line Out Jack", "AOUT3R",
+ "Line Out Jack", "AOUT4L",
+ "Line Out Jack", "AOUT4R",
+ "AIN1L", "Line In Jack",
+ "AIN1R", "Line In Jack",
+ "AIN2L", "Line In Jack",
+ "AIN2R", "Line In Jack";
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-in;
+ };
+};
+
+&anaclk2 {
+ clock-frequency = <24576000>;
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
+ <&clks IMX6SX_PLL4_BYPASS>,
+ <&clks IMX6SX_CLK_PLL4_POST_DIV>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
+ <&clks IMX6SX_PLL4_BYPASS_SRC>;
+ assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
+&esai {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esai>;
+ assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>,
+ <&clks IMX6SX_CLK_ESAI_EXTAL>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <24576000>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- vcc_sd3: regulator@0 {
- compatible = "regulator-fixed";
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_vcc_sd3>;
- regulator-name = "VCC_SD3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
};
};
};
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -68,17 +206,325 @@
status = "okay";
};
+&iomuxc {
+ pinctrl_egalax_int: egalax-intgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x10b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_esai: esaigrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK 0x1b030
+ MX6SX_PAD_CSI_DATA01__ESAI_TX_FS 0x1b030
+ MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x1b030
+ MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x1b030
+ MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x1b030
+ MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x1b030
+ MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK 0x1b030
+ MX6SX_PAD_CSI_DATA03__ESAI_RX_FS 0x1b030
+ MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x1b030
+ MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x1b030
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6SX_PAD_ENET2_COL__SPDIF_IN 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+};
+
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ cs42888: cs42888@48 {
+ compatible = "cirrus,cs42888";
+ reg = <0x48>;
+ clocks = <&anaclk2 0>;
+ clock-names = "mclk";
+ VA-supply = <®_cs42888>;
+ VD-supply = <®_cs42888>;
+ VLS-supply = <®_cs42888>;
+ VLC-supply = <®_cs42888>;
+ };
+
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_egalax_int>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&i2c3 {
- clock-frequency = <100000>;
+ clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
+ pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
max7310_a: gpio@30 {
@@ -96,133 +542,16 @@
};
};
-&qspi1 {
+&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi1_1>;
+ pinctrl-0 = <&pinctrl_spdif>;
+ assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+ assigned-clock-rates = <24576000>;
status = "okay";
- ddrsmp=<2>;
-
- flash0: n25q256a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a";
- spi-max-frequency = <29000000>;
- reg = <0>;
- };
-
- flash1: n25q256a@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a";
- spi-max-frequency = <29000000>;
- reg = <1>;
- };
};
-&iomuxc {
- imx6x-sabreauto {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
- MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3_2: i2c3grp-2 {
- fsl,pins = <
- MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
- MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_qspi1_1: qspi1grp_1 {
- fsl,pins = <
- MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 0x70a1
- MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 0x70a1
- MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 0x70a1
- MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 0x70a1
- MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK 0x70a1
- MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B 0x70a1
- MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x70a1
- MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x70a1
- MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 0x70a1
- MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 0x70a1
- MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x70a1
- MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x70a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
- MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
- MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
- >;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
- MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
- MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
- MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
- MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
- MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
- MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
- MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
- >;
- };
-
- pinctrl_vcc_sd3: vccsd3grp {
- fsl,pins = <
- MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
- >;
- };
- };
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
};
diff --git a/arch/arm/dts/imx6sx-sdb.dts b/arch/arm/dts/imx6sx-sdb.dts
index 5a63ca6..969cfe9 100644
--- a/arch/arm/dts/imx6sx-sdb.dts
+++ b/arch/arm/dts/imx6sx-sdb.dts
@@ -108,23 +108,23 @@
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: n25q256a@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <0>;
};
- flash1: n25q256a@2 {
+ flash1: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <2>;
};
};
diff --git a/arch/arm/dts/imx6sx-sdb.dtsi b/arch/arm/dts/imx6sx-sdb.dtsi
index f6972de..c6e85e4 100644
--- a/arch/arm/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/dts/imx6sx-sdb.dtsi
@@ -153,6 +153,8 @@
sound {
compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
model = "wm8962-audio";
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
@@ -165,6 +167,7 @@
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <6>;
+ hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
panel {
@@ -179,6 +182,15 @@
};
};
};
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif",
+ "fsl,imx6sx-sdb-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-out;
+ };
+
};
&audmux {
@@ -194,6 +206,7 @@
phy-mode = "rgmii-id";
phy-handle = <ðphy1>;
phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ fsl,magic-packet;
status = "okay";
mdio {
@@ -213,8 +226,9 @@
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy2>;
+ fsl,magic-packet;
status = "okay";
};
@@ -281,6 +295,7 @@
};
&pwm3 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
@@ -296,6 +311,14 @@
status = "disabled";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
@@ -450,6 +473,12 @@
>;
};
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
@@ -505,6 +534,13 @@
>;
};
+ pinctrl_mqs: mqsgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+ MX6SX_PAD_SD2_CMD__MQS_LEFT 0x120b0
+ >;
+ };
+
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
@@ -562,19 +598,25 @@
>;
};
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
- MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
- MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
- MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
- MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1
+ MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x1b0b1
+ MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x1b0b1
>;
};
diff --git a/arch/arm/dts/imx6sx-softing-vining-2000.dts b/arch/arm/dts/imx6sx-softing-vining-2000.dts
index 78dd575..b9a1401 100644
--- a/arch/arm/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/dts/imx6sx-softing-vining-2000.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/dts-v1/;
@@ -16,11 +13,6 @@
model = "Softing VIN|ING 2000";
compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
- aliases {
- mmc0 = &usdhc4;
- mmc1 = &usdhc2;
- };
-
chosen {
stdout-path = &uart1;
};
@@ -48,22 +40,22 @@
regulator-max-microvolt = <3300000>;
};
- pwmleds {
+ led-controller {
compatible = "pwm-leds";
- red {
+ led-1 {
label = "red";
max-brightness = <255>;
pwms = <&pwm6 0 50000>;
};
- green {
+ led-2 {
label = "green";
max-brightness = <255>;
pwms = <&pwm2 0 50000>;
};
- blue {
+ led-3 {
label = "blue";
max-brightness = <255>;
pwms = <&pwm1 0 50000>;
@@ -101,7 +93,7 @@
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
- cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -270,17 +262,6 @@
status = "okay";
};
-®_pcie {
- regulator-always-on;
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie>;
- reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
@@ -409,15 +390,15 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1
>;
};
@@ -515,19 +496,30 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ reset-gpio-active-high;
+ status = "okay";
+};
+
&pwm1 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&pwm6 {
+ #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
status = "okay";
diff --git a/arch/arm/dts/imx6sx-udoo-neo.dtsi b/arch/arm/dts/imx6sx-udoo-neo.dtsi
index ee64565..c84ea1f 100644
--- a/arch/arm/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/dts/imx6sx-udoo-neo.dtsi
@@ -183,6 +183,27 @@
status = "okay";
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ port {
+ hdmi: endpoint {
+ remote-endpoint = <&lcdc>;
+ };
+ };
+ };
+ };
+};
+
&i2c4 { /* Onboard Motion sensors */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,10 +211,22 @@
status = "disabled";
};
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
+
+ port {
+ lcdc: endpoint {
+ remote-endpoint = <&hdmi>;
+ };
+ };
+};
+
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
- <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
+ <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
};
pinctrl_enet1: enet1grp {
@@ -227,12 +260,52 @@
<MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1>,
+ <MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1>;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins =
<MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
<MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
};
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
@@ -273,24 +346,23 @@
pinctrl_otg1_reg: otg1grp {
fsl,pins =
- <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>;
+ <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>;
};
-
pinctrl_otg2_reg: otg2grp {
fsl,pins =
- <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>;
+ <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>;
};
pinctrl_usb_otg1: usbotg1grp {
fsl,pins =
- <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>,
- <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>;
+ <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>,
+ <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>;
};
pinctrl_usb_otg2: usbot2ggrp {
fsl,pins =
- <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>;
+ <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>;
};
pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm/dts/imx6sx.dtsi b/arch/arm/dts/imx6sx.dtsi
index 8d2d396..4d075e2 100644
--- a/arch/arm/dts/imx6sx.dtsi
+++ b/arch/arm/dts/imx6sx.dtsi
@@ -49,6 +49,9 @@
spi2 = &ecspi3;
spi3 = &ecspi4;
spi4 = &ecspi5;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ usb2 = &usbh;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
@@ -87,6 +90,8 @@
"pll1_sw", "pll1_sys";
arm-supply = <®_arm>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
@@ -132,14 +137,10 @@
clock-output-names = "anaclk2";
};
- tempmon: tempmon {
- compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
- interrupt-parent = <&gpc>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ mqs: mqs {
+ compatible = "fsl,imx6sx-mqs";
+ gpr = <&gpr>;
+ status = "disabled";
};
pmu {
@@ -153,7 +154,7 @@
#phy-cells = <0>;
};
- soc {
+ soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
@@ -181,7 +182,7 @@
interrupt-parent = <&intc>;
};
- L2: l2-cache@a02000 {
+ L2: cache-controller@a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -215,7 +216,7 @@
clocks = <&clks IMX6SX_CLK_APBH_DMA>;
};
- gpmi: gpmi-nand@1806000{
+ gpmi: nand-controller@1806000{
compatible = "fsl,imx6sx-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -333,6 +334,7 @@
};
esai: esai@2024000 {
+ compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
@@ -342,6 +344,9 @@
<&clks IMX6SX_CLK_SPBA>;
clock-names = "core", "mem", "extal",
"fsys", "spba";
+ dmas = <&sdma 23 21 0>,
+ <&sdma 24 21 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -388,18 +393,28 @@
};
asrc: asrc@2034000 {
+ compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
- <&clks IMX6SX_CLK_ASRC_IPG>,
- <&clks IMX6SX_CLK_SPDIF>,
- <&clks IMX6SX_CLK_SPBA>;
- clock-names = "mem", "ipg", "asrck", "spba";
- dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
- <&sdma 19 20 1>, <&sdma 20 20 1>,
- <&sdma 21 20 1>, <&sdma 22 20 1>;
+ clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
+ <&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "mem", "ipg", "asrck_0",
+ "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+ "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+ "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+ "asrck_d", "asrck_e", "asrck_f", "spba";
+ dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
+ <&sdma 19 23 1>, <&sdma 20 23 1>,
+ <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
+ fsl,asrc-rate = <48000>;
+ fsl,asrc-width = <16>;
status = "okay";
};
};
@@ -411,7 +426,7 @@
clocks = <&clks IMX6SX_CLK_PWM1>,
<&clks IMX6SX_CLK_PWM1>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm2: pwm@2084000 {
@@ -421,7 +436,7 @@
clocks = <&clks IMX6SX_CLK_PWM2>,
<&clks IMX6SX_CLK_PWM2>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm3: pwm@2088000 {
@@ -431,7 +446,7 @@
clocks = <&clks IMX6SX_CLK_PWM3>,
<&clks IMX6SX_CLK_PWM3>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm4: pwm@208c000 {
@@ -441,7 +456,7 @@
clocks = <&clks IMX6SX_CLK_PWM4>,
<&clks IMX6SX_CLK_PWM4>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
flexcan1: can@2090000 {
@@ -451,7 +466,7 @@
clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
<&clks IMX6SX_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
- fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+ fsl,stop-mode = <&gpr 0x10 1>;
status = "disabled";
};
@@ -462,11 +477,11 @@
clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
<&clks IMX6SX_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
- fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+ fsl,stop-mode = <&gpr 0x10 2>;
status = "disabled";
};
- gpt: gpt@2098000 {
+ gpt: timer@2098000 {
compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +574,7 @@
gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
};
- kpp: kpp@20b8000 {
+ kpp: keypad@20b8000 {
compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -567,14 +582,14 @@
status = "disabled";
};
- wdog1: wdog@20bc000 {
+ wdog1: watchdog@20bc000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
};
- wdog2: wdog@20c0000 {
+ wdog2: watchdog@20c0000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -582,7 +597,7 @@
status = "disabled";
};
- clks: ccm@20c4000 {
+ clks: clock-controller@20c4000 {
compatible = "fsl,imx6sx-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -594,7 +609,7 @@
anatop: anatop@20c8000 {
compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x020c8000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -694,6 +709,16 @@
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ };
};
usbphy1: usbphy@20c9000 {
@@ -752,7 +777,7 @@
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@20d8000 {
+ src: reset-controller@20d8000 {
compatible = "fsl,imx6sx-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -806,7 +831,7 @@
};
};
- iomuxc: iomuxc@20e0000 {
+ iomuxc: pinctrl@20e0000 {
compatible = "fsl,imx6sx-iomuxc";
reg = <0x020e0000 0x4000>;
};
@@ -837,7 +862,7 @@
reg = <0x02100000 0x100000>;
ranges;
- crypto: caam@2100000 {
+ crypto: crypto@2100000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
@@ -850,13 +875,13 @@
<&clks IMX6SX_CLK_EIM_SLOW>;
clock-names = "mem", "aclk", "ipg", "emi_slow";
- sec_jr0: jr0@1000 {
+ sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
- sec_jr1: jr1@2000 {
+ sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -928,6 +953,7 @@
"enet_clk_ref", "enet_out";
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
@@ -940,7 +966,7 @@
status = "disabled";
};
- usdhc1: usdhc@2190000 {
+ usdhc1: mmc@2190000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -952,7 +978,7 @@
status = "disabled";
};
- usdhc2: usdhc@2194000 {
+ usdhc2: mmc@2194000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -964,7 +990,7 @@
status = "disabled";
};
- usdhc3: usdhc@2198000 {
+ usdhc3: mmc@2198000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -976,7 +1002,7 @@
status = "disabled";
};
- usdhc4: usdhc@219c000 {
+ usdhc4: mmc@219c000 {
compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1037,6 +1063,7 @@
<&clks IMX6SX_CLK_ENET_PTP>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
+ fsl,stop-mode = <&gpr 0x10 4>;
status = "disabled";
};
@@ -1051,13 +1078,17 @@
status = "disabled";
};
- ocotp: ocotp@21bc000 {
+ ocotp: efuse@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx6sx-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
clocks = <&clks IMX6SX_CLK_OCOTP>;
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
+
tempmon_calib: calib@38 {
reg = <0x38 4>;
};
@@ -1289,7 +1320,7 @@
status = "disabled";
};
- wdog3: wdog@2288000 {
+ wdog3: watchdog@2288000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -1329,7 +1360,7 @@
clocks = <&clks IMX6SX_CLK_PWM5>,
<&clks IMX6SX_CLK_PWM5>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm6: pwm@22a8000 {
@@ -1339,7 +1370,7 @@
clocks = <&clks IMX6SX_CLK_PWM6>,
<&clks IMX6SX_CLK_PWM6>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm7: pwm@22ac000 {
@@ -1349,7 +1380,7 @@
clocks = <&clks IMX6SX_CLK_PWM7>,
<&clks IMX6SX_CLK_PWM7>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
pwm8: pwm@22b0000 {
@@ -1359,20 +1390,20 @@
clocks = <&clks IMX6SX_CLK_PWM8>,
<&clks IMX6SX_CLK_PWM8>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
};
};
pcie: pcie@8ffc000 {
- compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+ compatible = "fsl,imx6sx-pcie";
reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */
+ <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";