remoteproc: stm32: use reset for hold boot
Use the reset function to handle the hold boot bit in RCC
with device tree handle with MCU_HOLD_BOOT identifier.
This generic reset allows to remove the two specific properties:
- st,syscfg-holdboot
- st,syscfg-tz
This patch prepares alignment with kernel device tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Fabien DESSENNE <fabien.dessenne@st.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/drivers/remoteproc/stm32_copro.c b/drivers/remoteproc/stm32_copro.c
index 33b574b..da678cb 100644
--- a/drivers/remoteproc/stm32_copro.c
+++ b/drivers/remoteproc/stm32_copro.c
@@ -8,30 +8,21 @@
#include <errno.h>
#include <fdtdec.h>
#include <log.h>
-#include <regmap.h>
#include <remoteproc.h>
#include <reset.h>
-#include <syscon.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <linux/err.h>
-#define RCC_GCR_HOLD_BOOT 0
-#define RCC_GCR_RELEASE_BOOT 1
-
/**
* struct stm32_copro_privdata - power processor private data
* @reset_ctl: reset controller handle
- * @hold_boot_regmap: regmap for remote processor reset hold boot
- * @hold_boot_offset: offset of the register controlling the hold boot setting
- * @hold_boot_mask: bitmask of the register for the hold boot field
+ * @hold_boot: hold boot controller handle
* @rsc_table_addr: resource table address
*/
struct stm32_copro_privdata {
struct reset_ctl reset_ctl;
- struct regmap *hold_boot_regmap;
- uint hold_boot_offset;
- uint hold_boot_mask;
+ struct reset_ctl hold_boot;
ulong rsc_table_addr;
};
@@ -43,32 +34,19 @@
static int stm32_copro_probe(struct udevice *dev)
{
struct stm32_copro_privdata *priv;
- struct regmap *regmap;
- const fdt32_t *cell;
- int len, ret;
+ int ret;
priv = dev_get_priv(dev);
- regmap = syscon_regmap_lookup_by_phandle(dev, "st,syscfg-holdboot");
- if (IS_ERR(regmap)) {
- dev_err(dev, "unable to find holdboot regmap (%ld)\n",
- PTR_ERR(regmap));
- return PTR_ERR(regmap);
- }
-
- cell = dev_read_prop(dev, "st,syscfg-holdboot", &len);
- if (len < 3 * sizeof(fdt32_t)) {
- dev_err(dev, "holdboot offset and mask not available\n");
- return -EINVAL;
+ ret = reset_get_by_name(dev, "mcu_rst", &priv->reset_ctl);
+ if (ret) {
+ dev_err(dev, "failed to get reset (%d)\n", ret);
+ return ret;
}
- priv->hold_boot_regmap = regmap;
- priv->hold_boot_offset = fdtdec_get_number(cell + 1, 1);
- priv->hold_boot_mask = fdtdec_get_number(cell + 2, 1);
-
- ret = reset_get_by_index(dev, 0, &priv->reset_ctl);
+ ret = reset_get_by_name(dev, "hold_boot", &priv->hold_boot);
if (ret) {
- dev_err(dev, "failed to get reset (%d)\n", ret);
+ dev_err(dev, "failed to get hold boot (%d)\n", ret);
return ret;
}
@@ -78,35 +56,6 @@
}
/**
- * stm32_copro_set_hold_boot() - Hold boot bit management
- * @dev: corresponding STM32 remote processor device
- * @hold: hold boot value
- * @return 0 if all went ok, else corresponding -ve error
- */
-static int stm32_copro_set_hold_boot(struct udevice *dev, bool hold)
-{
- struct stm32_copro_privdata *priv;
- uint val;
- int ret;
-
- priv = dev_get_priv(dev);
-
- val = hold ? RCC_GCR_HOLD_BOOT : RCC_GCR_RELEASE_BOOT;
-
- /*
- * Note: shall run an SMC call (STM32_SMC_RCC) if platform is secured.
- * To be updated when the code for this SMC service is available which
- * is not the case for the time being.
- */
- ret = regmap_update_bits(priv->hold_boot_regmap, priv->hold_boot_offset,
- priv->hold_boot_mask, val);
- if (ret)
- dev_err(dev, "failed to set hold boot\n");
-
- return ret;
-}
-
-/**
* stm32_copro_device_to_virt() - Convert device address to virtual address
* @dev: corresponding STM32 remote processor device
* @da: device address
@@ -149,9 +98,11 @@
priv = dev_get_priv(dev);
- ret = stm32_copro_set_hold_boot(dev, true);
- if (ret)
+ ret = reset_assert(&priv->hold_boot);
+ if (ret) {
+ dev_err(dev, "Unable to assert hold boot (ret=%d)\n", ret);
return ret;
+ }
ret = reset_assert(&priv->reset_ctl);
if (ret) {
@@ -180,16 +131,20 @@
priv = dev_get_priv(dev);
- /* move hold boot from true to false start the copro */
- ret = stm32_copro_set_hold_boot(dev, false);
- if (ret)
+ ret = reset_deassert(&priv->hold_boot);
+ if (ret) {
+ dev_err(dev, "Unable to deassert hold boot (ret=%d)\n", ret);
return ret;
+ }
/*
* Once copro running, reset hold boot flag to avoid copro
* rebooting autonomously
*/
- ret = stm32_copro_set_hold_boot(dev, true);
+ ret = reset_assert(&priv->hold_boot);
+ if (ret)
+ dev_err(dev, "Unable to assert hold boot (ret=%d)\n", ret);
+
writel(ret ? TAMP_COPRO_STATE_OFF : TAMP_COPRO_STATE_CRUN,
TAMP_COPRO_STATE);
if (!ret)
@@ -211,9 +166,11 @@
priv = dev_get_priv(dev);
- ret = stm32_copro_set_hold_boot(dev, true);
- if (ret)
+ ret = reset_assert(&priv->hold_boot);
+ if (ret) {
+ dev_err(dev, "Unable to assert hold boot (ret=%d)\n", ret);
return ret;
+ }
ret = reset_assert(&priv->reset_ctl);
if (ret) {