ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1
omap_smc1 is now generic enough to remove duplicate
omap3_gp_romcode_call logic that omap3 introduced.
As part of this change, move to using the generic lowlevel_init.S for
omap3 as well.
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Matt Porter <mporter@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 7695e16..f3725b2 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -28,7 +28,7 @@
ifeq ($(CONFIG_OMAP34XX),)
obj-y += boot-common.o
-obj-y += lowlevel_init.o
endif
+obj-y += lowlevel_init.o
obj-y += mem-common.o
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 80619b0..746df92 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -16,11 +16,13 @@
#include <asm/arch/spl.h>
#include <linux/linkage.h>
+#ifndef CONFIG_OMAP34XX
ENTRY(save_boot_params)
ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
str r0, [r1]
b save_boot_params_ret
ENDPROC(save_boot_params)
+#endif
ENTRY(omap_smc1)
PUSH {r4-r12, lr} @ save registers - ROM code may pollute
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index dd53b20..6e6a957 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -429,8 +429,7 @@
acr |= set_bits;
if (get_device_type() == GP_DEVICE) {
- omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_WRITE_ACR,
- acr);
+ omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_ACR, acr);
} else {
struct emu_hal_params emu_romcode_params;
emu_romcode_params.num_params = 1;
@@ -470,8 +469,7 @@
static void omap3_invalidate_l2_cache_secure(void)
{
if (get_device_type() == GP_DEVICE) {
- omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_L2_INVAL,
- 0);
+ omap_smc1(OMAP3_GP_ROMCODE_API_L2_INVAL, 0);
} else {
struct emu_hal_params emu_romcode_params;
emu_romcode_params.num_params = 1;
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 80cb263..7a69151 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -27,17 +27,6 @@
ENDPROC(save_boot_params)
#endif
-ENTRY(omap3_gp_romcode_call)
- PUSH {r4-r12, lr} @ Save all registers from ROM code!
- MOV r12, r0 @ Copy the Service ID in R12
- MOV r0, r1 @ Copy parameter to R0
- mcr p15, 0, r0, c7, c10, 4 @ DSB
- mcr p15, 0, r0, c7, c10, 5 @ DMB
- .word 0xe1600070 @ SMC #0 to enter monitor - hand assembled
- @ because we use -march=armv5
- POP {r4-r12, pc}
-ENDPROC(omap3_gp_romcode_call)
-
/*
* Funtion for making PPA HAL API calls in secure devices
* Input: